LUBRICATIONEQUIPMENT

AND ACCESSORIES

Catalogue LH2013

A division of hydro-gas couplings ccReg. No. 2007/07554/23

50 Years1963 - 2013

2

PNEUMATIC LUBRICATION EQUIPMENT Grease pumps 3Rollercarts 3

HOSE REELS Heavy Duty Series HD 880 4Medium Duty Series MD 880 4

PNEUMATIC OIL PUMPS Model 88/210 5Model 121 / 321 210HC 5

HOSEMASTER HIGH PRESSURE CLEANING EQUIPMENT Models HM5/HM 10 6

MANUAL LUBRICATION EQUIPMENT Field Greasers 7Bucket Pumps 7Foot-operated Pumps 7Knapsack Compressors 7Hand Lever Grease Guns 7

ACCESSORIES Hyco Drum Covers and Follower Plates 8Grease Nipples 8Grease Cups 8Spring Feed Lubricators 8Easy-out Tools 9High Pressure Guns 9Connectors Couplers and Adaptors 9Hoses for Hand Grease Guns 9Pneumatic Hand Lever Guns 9Drip Feed Oilers 10Oil Level Gauges 11Oil Sight Glasses 11Oil Decanters Steel/Plastic 11Funnels 11Oil Cans 12Oil Guns 12Oil Suction and Dispensing Guns 12POM POM Guns 12Nozzles 13Filters 13Drum Spanner 13

METERS Oil Meter 14Digital Flow Meter 14Diesel Meter 14Grease Meter 14

ELECTRIC DRUM PUMPS 12v DC Oil Pump 1512v DC Fuel Transfer Pump 15230V PUMP 15

MANUAL DRUM PUMPS Semi Rotary 16“T” Handle 16Fully Rotary 16Gear Oil Dispensers 16Oil Dispensing Trolleys 17Rollercart 210l/180kg 17

QUICK COUPLING 18

All Hyco and Hosemaster products are South African designed and manufactured to suit local conditions.

PRODUCT INDEX

3

Hyco High Pressure, Heavy Duty Grease PumpsPressure Ratio 50 : 1Also available 75:1 Ratio

STANDARD EQUIPMENTA. Air motorB. High pressure delivery hose 9,6 mm x 2 m and fittingsC. Grease control handle with Z-swivelD. Grease pump sectionE. Automatic oilerF. Quick release air coupling and insert

MODELS FOR GREASEDRUM CAPACITY

UP TO: OVERALL HEIGHT

WEIGHT KG TUBELENGTH

88/15 15 kg 660 mm 9.2 kg 34088/18 18 kg 700 mm 9.2 kg 38088/25 25 kg Imported Drums 9.8 kg varies88/50 50 kg 980 mm 10.2 kg 64088/180 180 kg 1250 mm 11.0 kg 740

INPUT OUTPUT DELIVERY700 kPa 35 MPa 700 g/min

Air consumption 0,34 m3/min

SPECIALSEnquiries are invited for supply of Hyco Grease Pumpsdiffering from the above standard specifications (e.g. forhigher pressures, higher grease volumes, etc.).

Hyco RollercartsPneumatic Grease Pumps mounted in HYCO Rollercartsfor acceptance of conventional grease drums of 15 and 50kg capacity. 180 kg rollercart also available.Top/Drum section fits over standard grease drumsand is attached to trolley section by three fasteners.Rollercarts can be supplied without pumps.

WEIGHT 88/15 27 kg

88/50 33 kg

Pumps are supplied with drawings and parts lists.Replacement parts and service readily available.

Made in RSA.

A

B

E

F

C

D

PNEUMATIC LUBRICATION EQUIPMENT

4

Hyco Heavy Duty Hose ReelsSeries HD 880 (1 & 3)

FEATURES:• For workshop use or on field

servicing of vehicles• For field or workshop use in

servicing of heavy equipment• Heavy duty clock-type spring

with counter-balance action• Positive latch and ratchet action• Fitted with two self-lubricating

ball bearings• Circular outlet frame with rollers

to eliminate hose wear• Complete with 500 mm

connecting hose• All parts treated against corrosion• Rugged construction• Spares readily available

Hyco Medium Duty Hose ReelsSeries MD 880 (2)

FEATURES:As HD880 but for lighter applications and space saving.Maximum Hose Capacity: 15 metresMass (Excluding hose): 29 kg with 15 m hose 34 kg

DIMENSION 208 mm 580 mm 470 mm

W H L

Grease Pump 88/180 connected to

Heavy Duty HD 880 Hose Reel

Maximum hose capacity 20 m.Mass (excluding hose) : 29 kg with 20 m hose 36 kg.(Available with open or enclosed reel).

Hyco Hose Reels are South African designed and manufactured to suit local conditions.

HOSE REELS

MODEL HOSE SIZE PURPOSE MAXIMUMHOSE CAPACITY

HD880/G 9,6 mm Greasing 20 m

HD880/O 9,6 mm Oil 20 m

HD880/A 9,6 mm Air 20 m

HD880/W 12,0 mm Water 15 m

HD880/D 25,0 mm Diesel 10 m

DIMENSION 265 mm 580 mm 470 mm

W H L

5

Hyco Oil PumpsModel 88/210Pressure Ratio 5 : 1Also available 10:1 RatioFor fitment to 210 litre oil drums

STANDARD EQUIPMENTA. Air motorB. Pulsation damperC. Low pressure delivery hose 9,6 mm x 2 m and fittingsD. Non-drip oil control handleE. Oil pump sectionF. Shut off air eliminatorG. Automatic oilerH. Quick release air coupling and insertI. Bunghole adaptor

PRESSURE (MAXIMUM)

INPUT OUTPUT DELIVERY

700 kPa 35 MPa SAE30 8,5ℓ/min

SAE90 5,4ℓ/min

AIR CONSUMPTION 0,34 m3/min

OVERALL LENGTH 1250 mm

WEIGHT 14 kg

TRANSFER PUMPSModels 121/210HC 321/210HCPressure Ratio 1:1 Pressure Ratio 3:1These pumps are intended mainly for easy transfer of lubricants from original drums/barrels to other smaller units. The air flow is regulated by a valve. The connection to the air line is easily made through the quick-coupler of the pump. 2 M x 25 mm Hose & Spout.

121/210 321/210Pump with long pump tube, to be mounted directly in the original drum. Hose and nozzle optional.Weight 7,5 kg.

121 or 321Pump with short pump tube, for other applications.Weight 4,2 kg.

SPECIALSHyco oil pumps can be supplied to meet many applications, e.g. Stub pumps, Volume transfer pumps, for fluids other than oil, etc., etc.Enquiries are invited for any special requirements.

All these pumps are made in R.S.A

A

B

C

H

I

E

D

F

G

PNEUMATIC OIL PUMPS

6

HOSEMASTER HM 5 & HM 10 Special

FEATURES:• Air Powered High Pressure Cleaning Unit• Pressure Ratio: 5 to 1 and 10 to 1• Air input maximum 700 kPa• Approx. 3,5 MPa cleaning power (HM 5)• Approx. 7 MPa cleaning power (HM 10)• Delivery 12,5 l/min both models• Air consumption: 0,34 m3/min (HM 5)

0,68 m3/min (HM 10)• Power Cleaning - with the chemical solution of your

choice• Made in RSA

STANDARD EQUIPMENTA. Air motorB. Fluid pumpC. Air-control valve - OptionalD. Air-line oiler and couplingE. Delivery hose: 9,6 mm ID x 12 m (HM 5)F. 9,6 mm ID x 12 m (HM 10)G. Suction hose - 770 mm longH. Suction filterI. Spray valve

WEIGHT COMPLETE HM 5 19 kg

HM 10 22 kg

Mounting bracket supplied with both models.An efficient low cost pneumatic high pressure wash pump for cleaning applications in garages, workshops, as well as in a variety of industries.The units are also very popular for foam injection application with drilling rigs for which it can be supplied as a bare pump only excluding the spray gun and hose - items E and H.Easily portable and by virtue of its standard mounting bracket can be mounted into conventional drums

A D

C

B

F

GE

H

HM 5

AD

C

B

F

G

E

H

HM 10

HOSEMASTER HIGH PRESSURE CLEANING UNITS

7

Hyco 2001 Field Greasers 15 kgHyco 2017 Field Greasers 25 kgHyco 2022 Field Greasers 18 kgFEATURES:• Designed for field lubrication under the most exacting

conditions• Strong and rugged• Builds up to 42 MPa grease pressure with minimal effort

2001 2002 2003 2004

• Fits standard 15 kg pail of grease Alt. 18, 25, 50 kg• Supplied with 2 m of high pressure hose, grease nozzle

and follower plate• Spares readily availableThe HYCO 2001 Fieldgun is a portable, hand operated, high pressure dispenser of greases and heavy oils for use in conjunction with a standard 15 kg pail. Lubricant is delivered through a 2 m flexible hose fitted with a rigid tube and hydraulic connector.• Pressure 42 MPa, Weight 8 kg, Height 580 mmAlso available Rollercart version 15 and 50 kg

Hyco 2002 Bucket Pumps / 2018 - for 5 kg

FEATURES:• Portable, utility grease pump• Capacity - 15 kg• Pressure - 42 MPa• Supplied with standard follower plate• Characteristics similar to Field Greaser, but requires

decanting of grease for easy portability• Weight 11,5 kg• Height 680 mm and 540 mm

Hyco 2003 Foot-operated Pumps

FEATURES:• A high pressure heavy duty lubricator foot-operated

leaving the hands free for lubrication operation• No follower plate required• Air waves created by spring mechanism• Drawing down grease• Capacity - 10 kg• Delivery - 3 grams per stroke• Hose length - 2 metres

• Pressure - 45 MPa• Weight - 12 kg• Height - 400 mm

Hyco 2004 Knapsack CompressorsA very useful piece of equipment for servicing nipples situated at a height, as on transformers and similar installations where the operator needs both hands free for

climbing. Another use is where lubrication points are widely separated by rough territory, as met in many civil engineering projects such as dams, hydro-electric schemes and aerial ropeways.• Capacity - 5 & 10 kg Pressure - 21 MPa • Weight 10 kg

While the field greaser fits the conventional 15 kg grease bucket, all other manual equipment requires decanting of grease.

All the above equipment is made in RSA

Hyco 2005 and 2012 Hand lever Grease Guns

CONTAINER SIZEMM

TOTAL LENGTHMM

CONTENTS

CM3

CAPACITY PER STROKE CM3

PRESSURE PERFORMANCE E MPA

WEIGHT

KG56,5 dia. x 290

390 500 2 40 1.2

56,5 dia. x 455

550 1000 2 40 1.7

400cc Grease Cartridges for 2005 Filled or Unfilled available

MANUAL LUBRICATION EQUIPMENT

8

Hyco Grease Nipples

HYCO CODE STRAIGHTTYPE

HYCO CODE ANGLE TYPE

H1 1/8” BSP H2 1/8” BSP 45°H1 1/4” BSP H3 1/8” BSP 90°H1 3/8” BSP H2 1/4” BSP 45°H1 1/4” BSF/UNF H3 1/4” BSP 90°H1 6 mm H2 1/4” BSF 45°H1 8 mm H3 1/4” BSF 90°H1 10 mm H2 6 mm 45°H1A 8 Ø H3 6 mm 90°

Drive in Type H2 8 mm 45°H1A 6 Ø H3 8 mm 90°

Drive in Type H2 10 mm 45°H1A 1/4” Ø H3 10 mm 90°

Drive in Type H3A 8 ØH15 6mm Selftapping Drive in Type 90°Full Range of self tapping threads available on request (popular size listed above)HYCO CODE STANDARD BUTTON-HEAD FITTINGSM1 1/8” BSP SteelM1 1/4” BSP SteelM1 3/8” BSP SteelAbove are popular sizes full range stocked including popular oil nipples.Also available in stainless and brass

Hyco Dust Caps For All Popular Nipples

Hyco Spring-feed Lubricator

FEATURES:• Quick and easy to recharge• Visible indication of grease level• Maintenance-free - solid workmanship• Maximum lube pressure through effective

spring system and sturdy piston• No engine stoppage when lubricating• Effective in any position - permits manual

sampling and quick replacement• Environmentally safe and no explosion danger• Also available in 400 g and 1 kg

SPECIFICATIONS:Made in RSAA variety of reducers are availableSynthetic grease is recommended.

Volume: approx. 72 cm3 Height full: 200 mm

Outside dia: 67-55 mm Standard connection: 1/4” BSP

Height empty: 155 mm Weight: 650 grams

Hyco Grease Cups

FEATURES:• Grease Cups provide

one of the most reliable, safest and favourable means of lubricating.

• A variety of available sizes permits installation anywhere.

• Quality of workmanship and tolerances ensure high lubrication pressure.

• Grease is easily absorbed by the bearing on demand.• Manufactured from sheet metal protected against

corrosion.• Available in most conventional threads.

SPECIFICATIONS:SIZE 1 2 3 4 5 6 7 8

CAPACITY (MIN.) CM3 2,2 5 10 17 35 50 70 120

DIAMETERMM 15 20 30 40 50 60 70 80

ACCESSORIES

Drive Tool

9

Connector Couplers and AdaptorsA wide range of connectors in addition to those shown is also available as standard stock items.

M22

M16

4063

N3600

40/M16 200XS 14514

40

500/502S

500/502H

500/502

2008

B40

M16 FLAT

Easy-out ToolsModel No. 70: Removes 7/16” and 3/8” HexRetaps 1/4” BSF Removes broken 1/8” PT

Model No. 80: Removes 5/16” and 3/8” HexRemoves broken and retaps 1/8” BSP - 28 std. thread

Hoses for Hand Grease Guns300, 500 mm and 750mm with 1/8” BSP male fittings.

High Pressure Guns• Grease control handle for pneumatic grease pumps• Oil control handle for pneumatic oil pumps• Pom-pom oil/grease gun - various nozzles available• Mighty Midget hand gun• Pneumatic Hand Lever Grease Gun 400cc

Hyco Drum Covers and Follower PlatesDesign for use with HYCO grease pump assemblies and available as separate items if required.Suitable for 15, 18, 50 and 180 kg standard grease drums.

Made in RSA.

ACCESSORIES

2011

2023

2007

20162006

10

Drip-feed Oilers

ADVANTAGES:• Number of drops exactly adjustable; instant cut-off• Non-corrosive valve needle• Large filler bowl with dust proof cover• Cylindrical• Brass nickel plated finish• Perspex or natural glassAlso available with multiple outlets and solenoid controlled to work in conjunction with equipment cycle.Drips approximately 45 per cc minimum 3 per minute.

SPECIFICATIONS:TYPE NO. THREAD OVERALL LENGTH GLASS LENGTH GLASS DIAMETER CAPACITIES

INCHES MM MM MM AVAILABLE CM3

UNI 25 R1/8 80 38 25 10

UNI 30 R1/8 85 40 30 20

UNI 40 R1/4 110 40 40 36

UNI 50 R1/4 120 50 50 78

UNI 60 R1/4 130 60 60 140

UNI 60 x 80 R1/4 150 80 60 200

UNI 80 R3/8 175 100 80 500

UNI 100 R3/8 210 100 100 750

UNI 100x120 R1/2 195 120 100 1 000

UNI 130x150 R1/2 240 150 130 2 000

UNI 150X180 R1/2 270 180 150 3 000

ELO 140 R1/2 150 60 60 140

ELO 500 R1/2 200 100 80 500

ELO 1 000 R1/2 240 120 100 1 000

Current 220V, 50 cycles other variations on request

ACCESSORIES

11

Oil Level Gauges

Brass 50 mm (2”) thread 1/4” BSP80 mm (3”) thread 1/4” BSP100 mm (4”) thread 1/4” BSP120 mm (5”) thread 1/4” BSP150 mm (6”) thread 1/4” BSP200 mm (8”) thread 1/4” BSP250 mm (10”) thread 1/4” BSP300 mm (12”) thread 1/4” BSP

Plastic, brass, aluminium oil sight glasses

DIMENSIONS IN MM:THREAD OVERALL VIEW1/4 BSP 20 6

3/8 BSP 24 9

1/2 BSP 28 12

3/4 BSP 35 16

1 BSP 40 22

11/4 BSP 48 28

11/2 BSP 55 33

2 BSP 70 43

Oil Decanter – Steel/PlasticModel No. 180• Made from heavy duty tin• Welded handle• Three external measuring lines• For use with mineral oil only

SIZE 1 2 3 4 6

CAPACITY L 0,50 1,00 2,00 2,50 5

MASS G 190 295 425 550 1300

Funnel – Steel/PlasticModel 200 - 202

• Made from heavy duty tin, with rolled edge• Locking clip to secure sieve• Welded-on handle

SIZE 1 2 3 4 5

OVERALL DIA. MM 160 180 200 220 240

MASS G 290 310 335 400 445

ACCESSORIES

12

Oil CanModel No. K 500

• Rigid, seamless drawn, steel container• Finished in baked lacquer• With dual purpose spout double ball brass pump with

steel oil can capacity 500 ccm.

Oil GunModel 70/PKO Purpose designed for oil with special seals capacity 500 ccm

Oil Suction and Dispensing GunModel SDF 4Suitable for suction and dispensing of various liquids available with metal or transparent hose dispensing pipes. Capacity 1000 ccmModel SDF3Capacity 500 ccm

POM POM Guns2010 STEEL 300ccm2010 L STEEL 335ccm2010 S SHOCK RESISTANT POLYAMIDE 70ccm

2010 L2010 2010 S

ACCESSORIES

13

NozzlesNH58013 1” 25mm ManualNH58113 1” 25mm Automatic

FILTERS 1”

GZFF 1 GZFF 1 CARTRIDGEFUEL FILTER COMPL

DRUM SPANNER FOR 210L DRUM

AIR REGULATOR FILTER & GAUGE ¼”

GZFR ¼

ACCESSORIES

14

Oil Meter (24790)Functions:• For oil and glycol • 4 digit display• Resettable trip meter• Non resettable totaliser• Easy calibration (accuracy 0,5%)• Simple battery changeTechnical DataWorking pressure: (0,5-70 bar, 8-1000 psi)Temperature range: 0oC to +55oCAccuracy: < 0,5% (after calibration)Battery: 2 x LR03 Alkaline - 7000 hours average life

Preset Digital Hose end Meter (24712)A digital volume meter which is microprocessor based and ergonomically designed. A safety lock prevents accidental operation of the trigger as a locking button must be depressed before the trigger can be released. The trigger can be locked in the open position and then closed by a light upward pressure.

Digital Flow Meter (NH58087)Working pressure max 300psiFlow: 20-190LPMAluminium housing-AAA battery

Diesel, Biodiesel, Light Oil Meter, 3 wheel (NH58081)Working pressure:max 50psiFlow: 20-75LPMAluminium housing resettable6 digit non resettable totalizer

Diesel, Biodiesel, Light Oil Meter, 4wheel (NH58082)Option Four digit counter version20 - 120L/min. 1” BSPF ports. Ideal for pumped systemsMax. pressure 10barAccuracy of ±1% with adjustable calibrationAluminium housing & cover6 digit non resettable totalizer

Grease Meter (14710)Digital grease meter, equipped with current dispense displayand resettable and non-resettable totalizer. Digital displaypowered by two 1,5 V AAA batteries.Max working pressure 50 MPa(500 bar).Max flow 1000gr/min.Accuracy +/- 3 %

METERS

15

NP58070 12v DC Oil Pump Up to 40 LPM (12 volt)

NP58020 12v DC Fuel Transfer Pump 12V,1/4HP DC MOTOR;CURRENT: 15AFlow Rate up to 76LPM;

Box contents:

• Pump 1pc• 3-Wire Battery Cable• Pipe (56cm-100.5cm) 1pc• Hose Fittings 1pc• Teflon Tape 1Roll• Owner’s Manual 1pc

OD 230 230V PUMP 40 L/min

Product Features• Vertical mount Fuel & Oil pump designed for Indoor use in Industrial,

Automotive, Heating & Marine applications.• For use with non-flammable media• Pumps have built in Bung Adapter to fit directly onto drums with a 2”

threaded opening.• Manufactured from chemically inert materials; these pumps work with a

wide variety of low viscosity media. Pump motor has double insulation which makes them safe for use with water & emulsions.

• Built-In Anti Siphoning system ensures that media does not flow out by Siphon action in case of accidental damage to the delivery hose or dispensing nozzle

• Duty Cycle: Continuous DutyWETTED COMPONENTSPOM, Polypropylene, Stainless Steel, Nitrile Rubber, Viton & PTFERECOMMENDED USEDiesel, Kerosene, Mineral & Synthetic Oils, Heating Oils, Antifreeze, Water, Emulsions etc.

ELECTRIC DRUM PUMPS

16

MANUAL DRUM PUMPS

Hyco Hand-operated Pumps

Semi-rotary Wing Pumps (1)FEATURES:• High output - various models deliver from 15 to 105

litres per minute• Models available in six different sizes and capacities

pumping to different heads• Flexibility of application - can be mounted onto drums,

tanks or in-line piping systems• Simplicity of design ensures maintenance-free operation

APPLICATIONS:High capacity pumping of a wide variety of oils, fuels and other liquids.TYPE YL-0 YL-1 YL-2 YL-3 YL-5 YL-7Suction discharge - mm 13 18 25 32 38 50Practical reciprocating speed - strokes/mi

104 94 88 82 72 56

Capacity with head and suction 1 m - l/min

15 22 28 40 85 105

Maximum head - m 26 28 30,5 20,5 15 15Maximum suction lift - m 4 4 4,5 4,5 5 5Mass - kg 4 5,5 6,5 7,5 15 28

Hyco `T’-handle Pumps 2020 (2)Made in RSAMaterial: Mild steel or stainless for chemicalsCapacity: 0,5l/stroke; 20 - 25l/minWeight: 6 kgDimensions: 1070 mm x 90 mm OD

Hyco GEAR OIL PUMP 2021 (3)Measured strokeWeight: 8.5 kg

Hyco MS Series (4)

FEATURES:• Fully rotary and reversible operations• Spring loaded rotor blades for positive displacement• 2” BSP bung adaptor for drum mounting• Rigid suction tubes available in standard or special

lengths• Spares and service readily available

APPLICATIONS:High capacity pumping of a wide variety of oils and liquids.

SPECIFICATIONS MS25Suction lift - 1.5Total head - 5.5Capacity - 20Mass - 4.6 kgOverall length - 1.3Operating rotation - 70r/minDischarge diameter - 25

Range of chemical hand pumps not listed

1

2

43

17

MANUAL DRUM PUMPS

Hyco 2009 Gear Oil Dispensers

FEATURES:• Adjustable rotary action for controlled delivery• Smooth operation combined with positive displacement• Sturdy construction and pleasing design• Handles from the lightest to the heaviest gear oils• Capacity 15 litres• 1,5 m long delivery hose with bent tip nozzle• Output

Maximum 2.5 turns = 350 ml Minimum 1 turn = 100 ml

• Long lasting, maintenance free life• Weight - 8.2 kg• Made in RSA• Height - 680 mmIn addition to drum pumps displayed, many more models are available ex-stock.

Oil Dispensing Trolleys 50 or 100 ℓNormal or Wheelbarrow Wheels

CMP 12Manual Chemical Drum Pump

Hyco RK180Rollercart for 210l or 180kg drumsWeight - 35 kgHandle removable for transport

18

HOSE ø PART NO1/4” 485105/16” 485113/8” 48512

HOSE ø PART NO1/4” 48540

5/16” 48541

3/8” 48542

1/2” 48543

HOSE ø PART NO1/4” 48603

3/8” 48600

1/2” 48601

3/4” 48602

MALE THREAD PART NO1/8” 485001/4” 485013/8” 48502

FEMALE THREAD PART NO1/4” 485033/8” 48504

HOSE CONNECTOR PART NO1/4” 486033/8” 486001/2” 486013/4” 48602

MALE THREAD PART NO1/4” 485943/8” 485301/2” 485903/4” 48592

FEMALE THREAD PART NO3/8” 485311/2” 485913/4” 48593

HOSE CONNECTOR PART NO1/4” 48550 5/16” 485513/8” 485521/2” 48553

QUICK-COUPLING

TECHNICAL DATA: QUICK COUPLINGS

MATERIAL: Shut-off Valve- Brass

Seal- Nitrile Rubber

Body and Sliding Cover- Brass

Other Parts- Steel

FINISH: Zinc Plated, Blue Chromated

MAX. WORKING PRESSURE: 1.4MPa, (14 bar, 200 psi)

AIR VOLUME PER MINUTE: 1350 l. at 6 bar (44516)

(FREE STANDING) 2500 l. at 6 bar (44521)

2800 l. at 6 bar (44531)

1/4”

44516

MALE

FEMALE

HOSE CONNECTOR

MALE

FEMALE

HOSE CONNECTOR

44521

44531

3/8”

1/2”

19

NOTES:

In line with our policy to constantly improve our products, specifications printed in this catalogue are subject to change without prior notice.“HOSEMASTER”, “HYCO” and “LUBECONSULT” are registered trademarks of HYDROGAS COUPLINGS (PTY) LTDCatalogue 1/2013

41 Kabeljou Street, Wadeville Ext 2. 1407P O Box 14562, Wadeville 1422Tel: (011) 824 4280/1/2/3 • Fax: (011) 824 3634A/H Craig 082 446 0288/93E-mail: hyco-sa@iafrica.comAlt. E-mail: hycosale@iafrica.com

A division of hydro-gas couplings ccReg. No. 2007/07554/23