thomas couplings & flange adaptors non … couplings and flange... f1 pipe products thomas...

11
www.thomaspipeproducts.com F1 PIPE PRODUCTS THOMAS Couplings & Flange Adaptors Non Restrained Products Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework

Upload: hangoc

Post on 29-May-2018

254 views

Category:

Documents


1 download

TRANSCRIPT

www.thomaspipeproducts.com F1

PIPE PRODUCTS

THOMAS Couplings & Flange AdaptorsNon Restrained Products

Large DiameterCouplings

Dedicated Connections For RigidLarge Diameter Pipework

COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED

www.thomaspipeproducts.com 10www.thomaspipeproducts.com F2

PROJECTNooitgedacht Bulk WaterPipeline

CLIENTBuffalo City Municipality

NOOITGEDACHT - Eastern Cape - South Africa

Dedicated Large Diameter Couplings

Engineered Connections for Large Diameter Pipelines of All RigidPipe Materials

www.thomaspipeproducts.com F3

Copyright © 2015 by Thomas Pipe Products

Size Range

- DN650mm - DN3000mm

Industries

- Water- Gas

Pipe Materials

- Ductile Iron- Cast Iron- Steel- Stainless Steel- PVC- HDPE- GRP- AC- Concrete

Application

Material Specification

Steel CoatingFusion Bonded Epoxy to SANS1217Others coatings available on request

Rubber SealEPDM SANS974 Related ISO4633Other rubber compounds such as Nitrile (NBR) and Viton are available on request

LONG BARREL LENGTH:Standard Large Diameter couplings have a 200mm barrel length. This length is not stated in the product code. Customers can specify the length of a Long Barrel coupling centre sleeve. The standard long barrel centre sleeve length = 300mm. Hence the notation L300. Longer coupling centre barrel lengths are available on request.

THOMAS PRODUCT GROUP:TC - Thomas Coupling

TC 0821 ID L300

COUPLING INTERNAL DIAMETER:0821 ID - 821mm Coupling IDLarge Diameter Couplings are manufactured withan 8mm fitting clearance. This coupling is suitablefor an 813mm OD steel pipe.

1 2 3

1

2

3

Specifications

Dedicated Large Diameter Couplings

www.thomaspipeproducts.com F4

Copyright © 2015 by Thomas Pipe Products

End RingMild Steel to BS EN 10025:2004 or Grade CQ

Center Sleeve or BarrelMild Steel Grade CQ

BoltsSteel to SANS1143 Grade 4.8 for M16Stainless Steel available on request

Bolt CoatingHot Dipped Galvanizing to SANS763

Nut CapPolypropylene Plastic

Dedicated Large Diameter Couplings

www.thomaspipeproducts.com F5

NOM. BORE

(mm / inch)

PIPE O.D.

(mm)

PIPE

MATERIAL

ORDER

CODE

ID

(mm)

A

(mm)

B

(mm)

BOLT WEIGHT

(kg)600mm / 24" 651mm AC 600 CLASS 12 (651mm) TC 0659 ID 659 779 332 M16X320 45.4

650mm / 26" 660mm TC 0668 ID 668 788 332 M16X320 46.0

600mm / 24" 667mm AC 600 COD (667mm) TC 0675 ID 675 795 332 M16X320 46.4

600mm / 24" 672mm AC 600 CLASS 18 (672mm) TC 0680 ID 680 800 332 M16X320 46.7

600mm / 24" 699mm AC 600 CLASS 24 (699mm) TC 0707 ID 707 827 332 M16X320 48.3

700mm / 28" 711mm TC 0719 ID 719 839 332 M16X320 49.2

600mm / 24" 727mm AC 600 CLASS 30 (727mm) TC 0735 ID 735 855 332 M16X320 50.2

700mm / 28" 738mm DUCTILE IRON (738mm) TC 0746 ID 746 866 332 M16X320 50.8

700mm / 28" 744mm AC 700 CLASS 6 (744mm) TC 0752 ID 752 872 332 M16X320 51.2

600mm / 24" 755mm AC 600 CLASS 36 (755mm) TC 0763 ID 763 883 332 M16X320 51.9

700mm / 28" 760mm AC 700 CLASS 12 (760mm) TC 0768 ID 768 888 332 M16X320 52.2

750mm / 30" 762mm TC 0770 ID 770 890 332 M16X320 52.3

700mm / 28" 784mm AC 700 CLASS 18 (784mm) TC 0792 ID 792 912 332 M16X320 53.6

800mm / 32" 813mm TC 0821 ID 821 941 332 M16X320 55.5

700mm / 28" 816mm AC 700 CLASS 24 (816mm) TC 0824 ID 824 944 332 M16X320 55.7

800mm / 32" 842mm DUCTILE IRON (842mm) TC 0850 ID 850 970 332 M16X320 57.3

700mm / 28" 848mm AC 700 CLASS 30 (848mm) TC 0856 ID 856 976 332 M16X320 57.6

800mm / 32" 850mm AC 800 CLASS 6 (850mm) TC 0858 ID 858 978 332 M16X320 57.8

800mm / 32" 868mm AC 800 CLASS 12 (868mm) TC 0876 ID 876 996 332 M16X320 58.8

800mm / 32" 896mm AC 800 CLASS 18 (896mm) TC 0904 ID 904 1024 332 M16X320 60.7

900mm / 36" 914mm TC 0922 ID 922 1042 332 M16X320 61.8

800mm / 32" 932mm AC 800 CLASS 24 (932mm) TC 0940 ID 940 1060 332 M16X320 62.9

900mm / 36" 945mm DUCTILE IRON (945mm) TC 0953 ID 953 1073 332 M16X320 63.7

900mm / 36" 956mm AC 900 CLASS 6 (956mm) TC 0964 ID 964 1084 332 M16X320 64.3

800mm / 32" 969mm AC 800 CLASS 30 (969mm) TC 0977 ID 977 1097 332 M16X320 65.1

900mm / 36" 976mm AC 900 CLASS 12 (976mm) TC 0984 ID 984 1104 332 M16X320 65.5

900mm / 36" 1008mm AC 900 CLASS 18 (1008mm) TC 1016 ID 1016 1136 332 M16X320 67.7

1000mm / 40" 1016mm TC 1024 ID 1024 1144 332 M16X320 68.1

1000mm / 40" 1048mm DUCTILE IRON (1048mm) TC 1056 ID 1056 1176 332 M16X320 70.1

1000mm / 40" 1048mm AC 900 CLASS 24 (1048mm) TC 1056 ID 1056 1176 332 M16X320 70.1

1000mm / 40" 1062mm AC 1000 CLASS 6 (1062mm) TC 1070 ID 1070 1190 332 M16X320 70.9

1000mm / 40" 1084mm AC 1000 CLASS 12 (1084mm) TC 1092 ID 1092 1212 332 M16X320 72.2

1100mm / 44" 1118mm TC 1126 ID 1126 1246 332 M16X320 74.3

1000mm / 40" 1120mm AC 1000 CLASS 18 (1120mm) TC 1128 ID 1128 1248 332 M16X320 74.4

1000mm / 40" 1165mm AC 1000 CLASS 24 (1165mm) TC 1173 ID 1173 1293 332 M16X320 77.1

1200mm / 48" 1219mm TC 1227 ID 1227 1347 332 M16X320 80.5

1200mm / 48" 1255mm DUCTILE IRON (1255mm) TC 1263 ID 1263 1383 332 M16X320 95.3

1300mm / 52" 1321mm TC 1329 ID 1329 1449 332 M16X320 100.1

1400mm / 56" 1422mm TC 1430 ID 1430 1550 332 M16X320 107.4

1400mm / 56" 1462mm DUCTILE IRON (1462mm) TC 1470 ID 1470 1590 332 M16X320 110.2

1500mm / 60" 1524mm TC 1532 ID 1532 1652 332 M16X320 114.7

1600mm / 64" 1626mm TC 1634 ID 1634 1754 332 M16X320 122.0

1600mm / 64" 1668mm DUCTILE IRON (1668mm) TC 1676 ID 1676 1796 332 M16X320 125.0

Any size up to DN3000mm can be manufacturedPopular sizes tabled belowStandard Working Pressure WP=1600kPaTest Pressure TP=1.5xWP=2400kPaFor higher WP contact our offices.

Dimensions

Copyright © 2015 by Thomas Pipe Products

COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED

www.thomaspipeproducts.com 10www.thomaspipeproducts.com F6

PROJECTRehabilitation WaterTreatment Facility

CLIENTeThekwini Municipality

DURBAN METRO - Kwa-Zulu Natal - South Africa

Material Specification

4

FLANGE NOMINAL BORE:In the example above DN800.

THOMAS PRODUCT GROUP:TF - Thomas Flange Adaptor

TF 0821 ID L200 x 0800 D

ADAPTOR INTERNAL DIAMETER:0821 ID - 821mm Adaptor IDLarge Diameter Flange Adaptors are manufactured with an 8mm fitting clearance. This adaptor is suitablefor an 813mm OD steel pipe.

1 2 3

1

2

4

Specifications

Dedicated Large Diameter Flange Adaptors

www.thomaspipeproducts.com F7

3

5

FLANGE DRILLING:In the example above BS 10 TABLE D.

5

Copyright © 2015 by Thomas Pipe Products

Steel CoatingFusion Bonded Epoxy to SANS1217Others coatings available on request

Rubber SealEPDM SANS974 Related ISO4633Other rubber compounds such as Nitrile (NBR) and Viton are available on request

End RingMild Steel to BS EN 10025:2004 or Grade CQ

Center Sleeve or BarrelMild Steel Grade CQ

BoltsSteel to SANS1143 Grade 4.8 for M16Stainless Steel available on request

Bolt CoatingHot Dipped Galvanizing to SANS763

Nut CapPolypropylene Plastic

Dedicated Large Diameter Flange Adaptors

www.thomaspipeproducts.com F8

Any size up to DN3000mm can be manufacturedPopular steel pipe sizes tabled belowStandard Working Pressure as per flange ratingTest Pressure TP=1.5xWPFor higher WP contact our offices.

Dimensions

Copyright © 2015 by Thomas Pipe Products

DN STEEL FLANGE FLANGE ID A B C D FLANGE

PIPE OD SPEC. DRILLING BOLT

+/- SIZE

(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

700 711 SANS1123 T1000/3 719 839 178 23 895 M24

700 711 SANS1123 T1600/3 719 839 178 23 910 M30

700 711 SANS1123 T2500/3 719 839 183 28 960 M39

700 711 SANS1123 T4000/3 719 839 278 38 995 M45

800 813 SANS1123 T1000/3 821 941 193 23 1015 M30

800 813 SANS1123 T1600/3 821 941 193 23 1025 M36

800 813 SANS1123 T2500/3 821 941 268 28 1085 M45

800 813 SANS1123 T4000/3 821 941 278 38 1140 M52

900 914 SANS1123 T1000/3 922 1042 198 28 1115 M30

900 914 SANS1123 T1600/3 922 1042 198 28 1125 M36

900 914 SANS1123 T2500/3 922 1042 268 28 1185 M45

900 914 SANS1123 T4000/3 922 1042 278 38 1250 M52

1000 1016 SANS1123 T1000/3 1024 1144 238 28 1230 M30

1000 1016 SANS1123 T1600/3 1024 1144 238 28 1255 M36

1000 1016 SANS1123 T2500/3 1024 1144 278 38 1320 M52

1000 1016 SANS1123 T4000/3 1024 1144 278 38 1360 M52

1200 1219 SANS1123 T1000/3 1227 1347 248 38 1455 M36

1200 1219 SANS1123 T1600/3 1227 1347 248 38 1485 M42

1200 1219 SANS1123 T2500/3 1227 1347 278 38 1530 M52

1200 1219 SANS1123 T4000/3 1227 1347 278 38 1575 M56

Dedicated Large Diameter Flange Adaptors

www.thomaspipeproducts.com F9

Any size up to DN3000mm can be manufacturedPopular steel pipe sizes tabled belowStandard Working Pressure as per flange ratingTest Pressure TP=1.5xWPFor higher WP contact our offices.

Dimensions

Copyright © 2015 by Thomas Pipe Products

DN STEEL FLANGE FLANGE ID A B C D FLANGE

PIPE OD SPEC. DRILLING BOLT

+/- SIZE

(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

700 711 BS4504, BS EN1092 PN10 719 839 178 23 895 M27

700 711 BS4504, BS EN1092 PN16 719 839 178 23 910 M33

700 711 BS4504, BS EN1092 PN25 719 839 183 28 960 M39

700 711 BS4504, BS EN1092 PN40 719 839 278 38 995 M45

800 813 BS4504, BS EN1092 PN10 821 941 193 23 1015 M30

800 813 BS4504, BS EN1092 PN16 821 941 193 23 1025 M36

800 813 BS4504, BS EN1092 PN25 821 941 268 28 1085 M45

800 813 BS4504, BS EN1092 PN40 821 941 278 38 1140 M52

900 914 BS4504, BS EN1092 PN10 922 1042 198 28 1115 M30

900 914 BS4504, BS EN1092 PN16 922 1042 198 28 1125 M36

900 914 BS4504, BS EN1092 PN25 922 1042 268 28 1185 M45

900 914 BS4504, BS EN1092 PN40 922 1042 278 38 1250 M52

1000 1016 BS4504, BS EN1092 PN10 1024 1144 238 28 1230 M33

1000 1016 BS4504, BS EN1092 PN16 1024 1144 238 28 1255 M39

1000 1016 BS4504, BS EN1092 PN25 1024 1144 278 38 1320 M52

1000 1016 BS4504, BS EN1092 PN40 1024 1144 278 38 1360 M52

1200 1219 BS4504, BS EN1092 PN10 1227 1347 248 38 1455 M36

1200 1219 BS4504, BS EN1092 PN16 1227 1347 248 38 1485 M45

1200 1219 BS4504, BS EN1092 PN25 1227 1347 278 38 1530 M52

1200 1219 BS4504, BS EN1092 PN40 1227 1347 278 38 1575 M56

1400 1420 BS4504, BS EN1092 PN10 1428 1548 278 38 1675 M39

1400 1420 BS4504, BS EN1092 PN16 1428 1548 278 38 1685 M45

1600 1620 BS4504, BS EN1092 PN10 1628 1748 278 38 1915 M45

1600 1620 BS4504, BS EN1092 PN16 1628 1748 278 38 1930 M52

1800 1820 BS4504, BS EN1092 PN10 1828 1948 278 38 2115 M45

1800 1820 BS4504, BS EN1092 PN16 1828 1948 278 38 2130 M52

2000 2020 BS4504, BS EN1092 PN10 2028 2148 278 38 2325 M45

2000 2020 BS4504, BS EN1092 PN16 2028 2148 303 63 2345 M56

COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED

www.thomaspipeproducts.comwww.thomaspipeproducts.com

PROJECTWater Treatment FacilityRehabilitation

CLIENTeThekwini Municipality

DURBAN METRO - Kwa-Zulu Natal - South Africa

PRODUCTSLarge Diameter

Flange Adaptors

F10

Material Specification

Specifications

Dedicated Large Diameter End Caps

www.thomaspipeproducts.com F11

InstallationAn End Cap is a blanked off end and is therefore subject to internal pipeline pressure forces. The force on an end cap increases with pipe diameter and internal pipeline pressure. Magnitudes in tens of tons are common and therefore adequate external restraint is mandatory to ensure an end cap remains in place. Do not encase in concrete, leave exposed for testing & maintenance.

Range

Application

End Caps are available from PN6 to PN64 and any nominal bore up to DN3000mm.

End Caps can be used to blank off a pipeline end. They are also perfect for pipeline pressure testing. End Caps can be used, removed and re-installed on the next section of pipeline being tested. End Caps can be supplied with sockets for pipeline pressure testing. Customers can specify the quantity and size of sockets, including flanged outlets. Bolts and rubber seals can be sold as spares if an end cap is used repeatedly.

Long Barrel End Caps are available and should be specified when being used on HDPE, oPVC and GRP pipe.

Specifications

Corrosion Protection CoatingFusion Bonded Epoxy to SANS1217Others coatings available on request

Rubber SealEPDM SANS974 Related ISO4633Other rubber compounds such as Nitrile (NBR) and Viton are available on request

End Cap End RingMild Steel to BS EN 10025:2004 or Grade CQ

End Cap BodyMild Steel Grade CQ

BoltsSteel to SANS1143 Grade 4.8 for M16Stainless Steel available on request

Bolt CoatingHot Dipped Galvanizing to SANS763

Nut CapPolypropylene Plastic

Copyright © 2015 by Thomas Pipe Products