835 m e englisch klein - sennebogen · * additional information on our crawler undercarriage can be...
TRANSCRIPT
Mobile material handling machine
Stage V
19 m
231 kW (Stage V)
227 kW (Stage IIIa)
160/200 kW (Electro)
45,5 t
2
Advanced. The E-Series.
Safe entry and exit - no-slip stepsState-of-the-art camera - entire work area in view
Maximum safety
Comfortable Maxcab operator cab - relaxed workSENCON - work program selection made easy
Maximum usability
Durable mechanical systems - stressed parts optimizedHigh speeds - high load capacities
Peak performance
Save fuel - reduce operating costsWork quietly - protect operator and environment
3 production sites - 2 subsidiariesmore than 150 sales partners - worldwide and also in your area
Consultation and support in your area
SENNEBOGEN Control System SENCON - easy fault diagnosisEasy Maintenance - clear labeling
Maintenance and service made easy
1
2
3
4
5
6
1962: rope-driven S833 with elevated operator cab
More than 65 years of experience in designing and constructing hydraulic material handling machines
Uncompromisingly high performance in all areas: Focus on material handling
Technology that can be mastered: High-quality components without over-engineering
Long product service life and high value retention
What makes up the E-Series
2
Advanced. The E-Series.
Safe entry and exit - no-slip stepsState-of-the-art camera - entire work area in view
Maximum safety
Comfortable Maxcab operator cab - relaxed workSENCON - work program selection made easy
Maximum usability
Durable mechanical systems - stressed parts optimizedHigh speeds - high load capacities
Peak performance
Save fuel - reduce operating costsWork quietly - protect operator and environment
3 production sites - 2 subsidiariesmore than 150 sales partners - worldwide and also in your area
Consultation and support in your area
SENNEBOGEN Control System SENCON - easy fault diagnosisEasy Maintenance - clear labeling
Maintenance and service made easy
1
2
3
4
5
6
1962: rope-driven S833 with elevated operator cab
More than 65 years of experience in designingand constructing hydraulic material handlingmachinesUncompromisingly high performance in allareas: Focus on material handlingTechnology that can be mastered: High-quality components without over-engineeringLong product service life and high valueretention
What makes up the E-Series
4
The E-Series. At a glance.
Up to 20% savings: working in Eco Mode with reduced engine speed
Idle automation reduces speed to 40% of operating speed
when not needed
Optimized settings of engine and hydraulics reduces fuel consumption
Four ways to save fuel
RPM1800 ECO
RPM0
RPM1400
RPM800
0 s 5 s 8 s 5 min
Work Idle Stop
Subject to technical changes. Further options available upon request.
Quiet operation
Consistently quiet operation thanks to decoupled
Soundpower level according to 2000/14/EC up to2 dB lower than required
High-capacity cooling
Constant, reliable performance thanks to large-dimensioned and robust fans and coolers
thanks to axial-piston pump and motor control and ondemand thermostatic control
Fan reversal for cleaning in series
3
4
2 3
2
4
The E-Series. At a g
Up to 20% savings: workwith reduced engine speIdle automation reducesoperating speed
when not neededOptimized settings of enreduces fuel consumptio
Four ways to save
RPM1800 ECO
RPM0
RPM1400
RPM800
0 s 5 s 8 s 5 min
Work Idle Stop
Subject to technical changes. Further options available upon request.
Quiet operation
Consistently quiet operation thanks to decoupled
Soundpower level according to 2000/14/EC up to2 dB lower than required
High-capacity cooling
Constant, reliable performance thanks to large-dimensioned and robust fans and coolers
thanks to axial-piston pump and motor control and ondemand thermostatic controlFan reversal for cleaning in series
3
4
2 3
2
5* Option
Powerful hydraulic system
Strong pumps with power reserves hydraulic valves and lines
Extra-long change intervals of 4,000 opera-
oil with extended service life when using SENNEBOGEN HydroClean*
No-slip work surfaces 2 cameras to the right and rear Platform with railing next to cab with sliding door
Hand rails* 1
Maximum safety
4
5
5
Powerful hydraulic system
Strong pumps with power reserves
hydraulic valves and linesExtra-long change intervals of 4,000 opera-
oil with extended service life when usingSENNEBOGEN HydroClean*
1
4
5
5
6
The premium cab.
consoles and ergonomic joysticks that move with the seat
pleasant grip through ergonomic design
precise control of all movements through direct and sensitive function activation
quick access to all operatingcontrols through optimized design of all push-buttons and switches
optimum cab climate with automatic air conditioning system, partial tinted glass
pleasant and equal temperature disper-sion by means of 9 nozzles
panoramic view
climatic comfort seat with air suspensi-on and air conditioning*
very quiet through optimized noise insulation
Highest safety & comfort with sliding door, wide door opening
ergonomically arranged operating con-trols for fatigue-free and relaxed working
12 V, 24 V, and USB charging sockets hands-free telephone preparation, do-cument box
various options: electric cooler behind the driver seat, protective covers, seat air conditioning
Features
* Option6
The premium cab.
consoles and ergonomic joystthat move with the seat
pleasant grip through ergono
precise control of all movemethrough direct and sensitivefunction activation
quick access to all operatingcontrols through optimizeddesign of all push-buttons and switches
optimum cab climate with automatic air conditioning system, partial tintedglass
pleasant and equal temperature disper-sion by means of 9 nozzles
panoramic view
climatic comfort seat with air suspensi-on and air conditioning*
very quiet through optimized noiseinsulation
Highest safety & comfort with slidingdoor, wide door opening
ergonomically arranged operating con-trols for fatigue-free and relaxed working
12 V, 24 V, and USB charging socketsVhands-free telephone preparation, do-cument box
various options: electthe driver seat, protecair conditioning
Features
* Option
7
SENNEBOGEN Hydro Clean*
Optimal protection of hydraulic components thanks to 3 μm micro-
Cleaner hydraulic oil, longer service life
Maintenance and service made easy.
Central measuring points
Easily accessible Quickly inspect entire hydraulic system
Clear labeling
All parts labeled with a unique part number
Easy and reliable spare parts ordering
Fast and easy diagnosis thanksto straightforward and clearly labeled electrical distributor
Easy access to all service points on the machine
Automatic central lubrication for equipment and slewing gear raceway
Optimized for maintenance
* Option 7
NNEBOGENro Clean*mal protection ofaulic components
nks to 3 μm micro-
ner hydraulic oil,er service life
Maintenance and service made easy.
Central measuring points
Easily accessibleQuickly inspect entire hydraulicsystem
Clear labeling
All parts labeled with a uniquepart numberEasy and reliable spare partsordering
Fast and easy diagnosis thanksto straightforward and clearly labeled electrical distributorEasy access to all service pointson the machineAutomatic central lubricationfor equipment and slewing gearraceway
Optimized for maintenance
* Option
8
K16 ULM
max.2,5 m
max.1,5 m
max.4,5 m
B18K16 K18
max.4,5 m
Mobil MHD Crawler Special*Mobil M
Orange peel grab
Clamshell grab
Magnet plate
Scrap metal shears
Attachments Equipment (additional equipment on request)
Cab elevation Uppercarriage
Variants - undercarriage
Modular structure - versatile solutions
Diesel-hydraulic drive
Electro-hydraulic drive
Motorized cable reel
Transformer
Options
* Additional information on our crawler undercarriage can be found in the separate 835 R E-Series brochure.
B19
Maxcab Industry
3,00 m
2,60 m
E270
8
K16 ULM
max.2,5 m
max.1,5 m
max.4,5 m
B18K16 K18
max.4,5 m
Mobil MHD Crawler Special*Mobil M
Orange peel grab
Clamshell grab
Magnet plate
Scrap metal shears
Attachments Equipment (additional equipment on request)
Cab elevation Uppercarriage
Variants - undercarriage
Modular structure - versatile solutions
Diesel-hydraulic drive
Electro-hydraulic drive
Motorized cable reel
Transformer
Options
* Additional information on our crawler undercarriage can be found in the separate 835 R E-Series brochure.
B19
Maxcab Industry
3,00 m
2,60 m
E270
9* Option
of the work area through powerful LED headlights*
Better illumination
even when fully extended, thanks to massive cylinders
High load capacities
thanks to railings*, grip handles and non-slip steps
Safe entry and exit
via the step grid with railingSafe entry and exit
of recyclable sheet steel Robust side cover
due to the broad outrigger area
High stability
for fast work cycles and high-performance material handling
Robust slewing gear (2x)
and safe working height, thanks to stable cab elevation
Ideal overview
through robust and FEM-optimized equipment
Reliable work
for conveniententry and exit
Sliding door
10
MACHINE TYPEModel (Type) 835
SLEWING DRIVEGearbox Compact planetary gear with bent-axis
hydraulic motor, integrated brake valves
Parking brake Spring-loaded disk brake
Slewing ring External gear slewing ring with 360° protection and pinion tooth lubrication
Slewing speed 0-8 RPM, stepless
UPPERCARRIAGEDesign Torsion-resistant box design, precision crafted,
steel bushings for boom bearing arrangementExtremely service-friendly concept, engine installed in the longitudinal direction
Central lubrication
Automatic central lubrication for equipment and slewing ring raceway
Electrical system
Central electrical distributor, battery disconnect switch
Cooling system 3-circuit cooling system with high cooling output, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedal Hand rail at the upper structure for additional safety
LED lighting packages Fire extinguisher Sea climate resistant coating Electric heater for hydraulic tank low-temperature packages
Hydraulically driven magnetic generator15 kW / 20 kW
Telematic system SENtrack DS
HYDRAULIC SYSTEMLoad sensing / LUDV hydraulic system, hydraulic, pilot-controlled work functions, load limit sensing control
Pump type Variable-displacement piston pump in swashplate design, load pressure-independent
independent control of work functions
Pump control- the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
Delivery rate maximum 740 l/minOperating pressure
to 350 bar
Filtrationchange interval
Hydraulic tank 500 lControl system Proportional, precision hydraulic activation of
work movements, 2 hydraulic servo joysticks for work functions, supplemental functions via switches and foot pedals
Safety Hydraulic circuits with safety valves, secured emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder
Options Tool Control for programming up to 10 tools in pressure / rate
Supplemental hydraulic circuit for shear attachment
Load moment warning with capacity utilization indicator
Overload safeguard with overload shut-down 60 HydroClean
ENGINEPower Stage V:
Rated power: 231 kW at 2100 rpm 237 kW at 2000 rpm / 242 kW at 1800 rpm Stage IIIa:Rated power: 227 kW at 2000 rpm 254 kW at 1800 rpm
Model Cummins L9Direct injection, turbo charged, charge air cooler, reduced emissions, ECO mode, idle automation, stop automation, fuel pre-warming
Cooling Water-cooled, direction of rotation changeover of the cooler fan
With water separator and heater
automatic dust discharge, main element and safety element, contamination indicator
Fuel tank 625 lDEF tank 75 l Electr. system 24 VBatteries 2 x 150 Ah, battery disconnect switch
Options Engine block pre-warming at temperatures under -20°C
Electric fuel pump
Technical data, equipment
Subject to change.10
MACHINE TYPEModel (Type) 835
SLEWING DRIVEGearbox Compact planetary gear with bent-axis
hydraulic motor, integrated brake valves
Parking brake Spring-loaded disk brake
Slewing ring External gear slewing ring with 360°protection and pinion tooth lubrication
Slewing speed 0-8 RPM, stepless
UPPERCARRIAGEDesign Torsion-resistant box design, precision crafted,
steel bushings for boom bearing arrangementExtremely service-friendly concept, engineinstalled in the longitudinal direction
Central lubrication
Automatic central lubrication for equipmentand slewing ring raceway
Electricalsystem
Central electrical distributor, battery disconnectswitch
Cooling system 3-circuit cooling system with high cooling output,thermostatically regulated fan drive for oil coolerand water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedalHand rail at the upper structure for additionalsafetyLED lighting packagesFire extinguisherSea climate resistant coatingElectric heater for hydraulic tank low-temperature packagesHydraulically driven magnetic generator15 kW / 20 kWTelematic system SENtrack DS
HYDRAULIC SYSTEMLoad sensing / LUDV hydraulic system, hydraulic,pilot-controlled work functions, load limit sensing control
Pump type Variable-displacement piston pump inswashplate design, load pressure-independent
independent control of work functions
Pump control- the pumps only pump as much oil as willactually be used, pressure purging, load limitsensing control
Delivery rate maximum 740 l/minOperatingpressure
to 350 bar
Filtrationchange interval
Hydraulic tank 500 lControl system Proportional, precision hydraulic activation of
work movements, 2 hydraulic servo joysticks for work functions, supplemental functionsvia switches and foot pedals
Safety Hydraulic circuits with safety valves, securedemergency lowering of the equipment atengine standstill, pipe fracture safety valvesfor lift cylinder and stick cylinder
OptionsTool Control for programming up to 10 toolsin pressure / rateSupplemental hydraulic circuit for shearattachmentLoad moment warning with capacityutilization indicatorOverload safeguard with overload shut-down 60
HydroClean
ENGINEPower Stage V:g
Rated power: 231 kW at 2100 rpm237 kW at 2000 rpm / 242 kW at 1800 rpmStage IIIa:gRated power: 227 kW at 2000 rpm254 kW at 1800 rpm
Model Cummins L9Direct injection, turbo charged, charge air cooler,reduced emissions, ECO mode, idle automation,stop automation, fuel pre-warming
Cooling Water-cooled, direction of rotationchangeover of the cooler fan
With water separator and heater
automatic dust discharge, main element andsafety element, contamination indicator
Fuel tank 625 lDEF tank 75 l Electr. system 24 VBatteries 2 x 150 Ah, battery disconnect switch
Options Engine block pre-warming at temperaturesunder -20°CElectric fuel pump
Technical data, equipment
Subject to change.
11
EQUIPMENTDesign Decades of experience, state-of-the-art
computer simulation, highest level stability, longest service life, large-dimensioned be-aring points, sealed special bearing bushes, precision-crafted, quick-release couplings on the grapple connections - open/close/rotate
Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points
Options Ball valves on the hydraulic lines grab open, close, rotateKinematic position II for greater working depthSea climate resistant coatingSea climate resistant coating of all cylinders, nickel-plated and chrome-platedFloat position for equipment via hoist cylinderLift limitation / stick limitation adjustable for the stop settings, for example in the hall
CAB Cab type Hydraulically elevating cab E270
Cab equipment Sliding door, sliding window in the operator door excellent ergonomics, climate automation, seat heater, air-suspension comfort seat, fresh
12 V / 24 V connections, SENCON
Options Cab E300/260 can be elevated 300 cm, and moved forward 260 mm hydraulically
Rigid cab elevation 1.00 m Auxiliary heating system with timer air, ideal for waste recycling applications
Steering wheel steering with adjustable steering column
Armored glass windshield, additional safety Armored glass roof window, additional safety
Safety side window Camera system for view under cabin Sunblind for roof window Protective roof grating FOPS protective roof grating, protection against falling objects
Front protective grating Radio with speakers Enlarged industrial cab with undivided armored glass windshield
UNDERCARRIAGEDesign Mobile undercarriage with integrated 4-point
outriggers, steering axle as hydraulically locking pendulum axle, pendulum axle cylinder with pipe fracture safety valves, type MP41 E
Drive All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valve and 2-stage power shift transmissionPlanetary axles with integrated steering cylinders, service brake in 2-circuit system
Parking brake Spring-loaded disk brake
Tires 12.00-20, 8x, option: 12.00-24, 8x
Speed 0-5.4 km/h stage I, 0-20 km/h stage II
Options Individual activation of the outriggers for
Protection for travel drive Maneuvering hitch
ELECTRIC DRIVE Option Power: 160 kW / 400 volt / 50 Hz
Total connected load 270 kVA, fuse protection in machine‘s switch box 315A at 400 V / in combination with magnet system 355A at 400 V - engine start up via star delta switch.
Power: 200 kW / 400 volt / 50 HzTotal connected load 340 kVA, fuse protection in machine‘s switch box 400A at 400 V / in combination with magnet system 425 at 400 V - engine start up via star delta switch.
Advantages: Lowest operating costs, low-noise and virtually vibration-free work, long service life of the hydraulic components
OPERATING WEIGHTMass
Note
approximately 45,500 kgBasic machine 835 M withattachment K18 and600 l orange peel grab
The operating weight variesdepending on the model.
Technical data, equipment
Subject to change. 11
EQUIPMENTDesign Decades of experience, state-of-the-art
computer simulation, highest level stability,longest service life, large-dimensioned be-aring points, sealed special bearing bushes,precision-crafted, quick-release couplings onthe grapple connections - open/close/rotate
Cylinders Hydraulic cylinders with high-quality sealingand guide elements, end position damping,sealed bearing points
Options Ball valves on the hydraulic lines grab open,close, rotateKinematic position II for greater working depthSea climate resistant coatingSea climate resistant coating of all cylinders, nickel-plated and chrome-platedFloat position for equipment via hoistcylinderLift limitation / stick limitation adjustable forthe stop settings, for example in the hall
CABCab type Hydraulically elevating cab E270
Cab equipment Sliding door, sliding window in the operatordoor excellent ergonomics, climate automation,seat heater, air-suspension comfort seat, fresh
12 V / 24 V connections, SENCON
Options Cab E300/260 can be elevated 300 cm,and moved forward 260 mm hydraulicallyRigid cab elevation 1.00 mAuxiliary heating system with timer
air, ideal for waste recycling applicationsSteering wheel steering with adjustablesteering columnArmored glass windshield, additional safetyArmored glass roof window, additionalsafetySafety side windowCamera system for view under cabinSunblind for roof windowProtective roof gratingFOPS protective roof grating, protectionagainst falling objectsFront protective gratingRadio with speakersEnlarged industrial cab with undividedarmored glass windshield
UNDERCARRIAGEDesign Mobile undercarriage with integrated 4-point
outriggers, steering axle as hydraulicallylocking pendulum axle, pendulum axle cylinderwith pipe fracture safety valves, type MP41 E
Drive All-wheel drive powered by a variable-displacement hydraulic motor with direct-mounted, automatically actuated brake valveand 2-stage power shift transmissionPlanetary axles with integrated steeringcylinders, service brake in 2-circuit system
Parking brake Spring-loaded disk brake
Tires 12.00-20, 8x, option: 12.00-24, 8x
Speed 0-5.4 km/h stage I, 0-20 km/h stage II
Options Individual activation of the outriggers for
Protection for travel driveManeuvering hitch
ELECTRIC DRIVEOption Power: 160 kW / 400 volt / 50 Hz
Total connected load 270 kVA, fuseprotection in machine‘s switch box 315Aat 400 V / in combination with magnetsystem 355A at 400 V - engine start up viastar delta switch.
Power: 200 kW / 400 volt / 50 HzTotal connected load 340 kVA, fuseprotection in machine‘s switch box 400Aat 400 V / in combination with magnetsystem 425 at 400 V - engine start up viastar delta switch.
Advantages: Lowest operating costs,low-noise and virtually vibration-freework, long service life of the hydrauliccomponents
OPERATING WEIGHTMass
Note
approximately 45,500 kgBasic machine 835 M withattachment K18 and600 l orange peel grab
The operating weight variesdepending on the model.
Technical data, equipment
Subject to change.
12
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10m
12.6
13.6
14.8
15.6
15.8
10.2
8.9
8.8
7.7
9.0
9.8
10.0
10.2
10.6
11.1
11.7
11.9
11.0
9.5
5.8
7.8
8.8
8.8
8.9
9.1
9.4
9.7
9.7
9.0
8.0
5.9
7.6
7.8
7.9
8.0
8.2
8.3
8.0
7.5
6.6
5.5
7.0
7.0
7.1
7.2
7.2
6.8
6.3
5.4
6.2
6.3
6.3
6.3
6.2
5.7
5.1
5.4
5.4
5.3
5.0
4.5
3.9
14.2
20.1
7.3
I.24072008141131
Undercarriage MP41E Compact boom 9,1 mGrab stick 6,9 m
Cab Maxcab E270, hydraulically elevating
K16Kinemat. Position I
Machine shown in mirror image
K16Kinemat. Position I
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change.12
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10m
.622122.1212.6
13.6
14.8
15.6
15 8.88815151515.8
10.2
8.9
8.8
7.7
99.9 000
9.8
10.0
10.2
10.610 6
11.1
11.7
11.9
11.0
9.5
5.85
7.8
8.8
8.8
8.9
9.9 11
9.4
9.7
9.7
9.0
8.0
5.95.9
77.7 666
7.8
7.9
8.08 0
8.2
8.3
8.0
7.5
6.6
5.55.5.
7.000
7.0
7.711
7.2
7.2
6.8.
6.3.
5..4
.26.2.2
6.36 3
6.3
6.3
6.2
5.777
5.1
5.44
5.4
5.3
5.5 00
4.5
.9333 99
14.24.2
20020.1
7.7.3
I.240720081411318
Undercarriage MP41E Compact boom 9,1 mGrab stick 6,9 m
Cab Maxcab E270, hydraulically elevating
Machine shown inmirror image
K16Kinemat. Position IKinemat. Position Imat. Positmat. Posit
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change.
13
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
8.8
12.1
13.0
14.0
8.3
7.6
7.4
8.7
9.3
9.3
9.5
9.9
10.4
10.8
10.6
9.5
8.0
7.4
8.0
8.0
8.1
8.3
8.6
8.8
8.5
7.7
6.6
6.2
7.0
7.0
7.0
7.1
7.3
7.4
6.9
6.3
5.3
5.6
6.2
6.2
6.2
6.2
6.2
6.2
5.7
5.1
4.2
5.4
5.4
5.4
5.3
5.2
4.9
4.6
3.9
4.5
4.4
4.2
3.9
3.4
14.4
19.5
3.3
3.2
3.9
m
Machine shown in mirror image
I.25072008105903
Undercarriage MP41E Cab Maxcab E270, hydraulically elevating
Compact boom 9,1 mGrab stick 6,6 m ULM
K16 ULMKinemat. Position I
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change. 13
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
8.8
112.1112 1
13.0
14.0
8.38
7.6.
7.4
8.78 7
9.3
9.3
9.5
9.99 9
10.4
10.8
10.6
9.5
8.0
7.47 4
8.0
8.0
8.1
8.38 3
8.6
8.8
8.5
7.7
6.6
6.266.6 2
7.0
7.0
7.0
7.17 1
7.3
7.4
6.9
6.3
5.3
5.655
6.2.
6.2.
6.26 2
6.2.
6.2
6.2
5.7.
5.1.
4.2
5.44
5.45 4
5.4
5.3
5.2
4.94 9
64.6666
3.9
54.5.5
4.4
4.2
3.93 9
3.4
1414.414
19.5
3.33 33 33
3.2
33.93
m
Machine shown inmirror image
I.25072008105903
Undercarriage MP41E Cab Maxcab E270, hydraulically elevating
Compact boom 9,1 mGrab stick 6,6 m ULM
K16 ULMKinemat. Position Iim
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change.
14
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
13.2
14.2
14.9
11.7
7.4
6.5
6.5
9.8
10.2
10.7
11.2
11.3
10.5
9.2
7.6
7.3
8.0
8.2
8.2
8.4
8.7
8.9
9.2
9.4
9.2
8.6
7.8
6.6
6.6
7.2
7.3
7.3
7.4
7.5
7.7
7.8
7.9
7.7
7.2
6.6
5.6
5.5
6.0
6.5
6.5
6.6
6.6
6.7
6.8
6.5
6.1
5.5
4.7
5.3
5.7
5.9
5.9
5.9
5.9
5.9
5.9
5.5
5.2
4.6
3.8
4.9
5.3
5.3
5.2
5.2
5.1
4.9
4.7
3.7
4.5
4.6
4.5
4.4
4.2
3.9
3.4
7.3 6.2
19.5
9.5
3.9
3.4
3.8
m
I.24072008101522
Undercarriage MP41E Compact boom 10,1 mGrab stick 7,9 m
Cab Maxcab E270, hydraulically elevating
K18Kinemat. Position I
Machine shown in mirror image
K18Kinemat. Position I
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
Lift capacities
Technical data and dimension information subject to change.14
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
133.23.3
14.24
14.94
11.711.711.711 7
7.4.
6.5.
6.5.
9.89
10.210 2
10.7
11.2
11.3
10.5
9.2
7.67 6
7 37.37.3
8.0
8.2
8.2
8.4
8.78 7
8.9
9.2
9.4
9.2
8.6
7.8
6.66 6
6.6
7.2
7.3
7.3
7.4
7.57 5
7.7
7.8
7.9
7.7
7.2
6.6
5.65 6
5.55
6.066.
6.5.
6.5
6.6.
6.6.6 6
6.7
6.8.
6.5.
6.1.
5.5.
4.74 7
5.35
5.75.75.7
5.9
5.9
5.95 9
5.9
5.9
5.9
5.5555
5.2
4.6
3.83 8
4.944.
5.3
5.35 3
5.2
5.2
5.1
4.94 9
4.744.
3.7
54.5554 5
4.6
4.5
4.4
4.24 2
3.9
3.43.
7.3 6.2
19.55.5
9.5
3.93.93.93 9
3.4
3.8
m
I.240720081015220
Undercarriage MP41E Compact boom 10,1 mGrab stick 7,9 m
Cab Maxcab E270, hydraulically elevating
Machine shown inmirror image
K18Kinemat. Position IKinemat. Position Iiiaa
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist
Lift capacities
Technical data and dimension information subject to change.
15
7,0
12 ,8
7 ,1
7 ,9
9,7
10 ,0
10 ,5
7 ,8
6,6
7 ,
7 ,
8,
8,
8,
8,
8,
6,
6,0
6,4
6,5
6,5
6,6
5,5
4,7
5,7
5,8
5,8
5,8
5,8
4,6
3,9
4,9
5,2
5,
5,
5,0
3,
4,3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8m
20140416072456
Undercarriage MP42EPylon 2,5 m
Compact boom 10,1 mGrab stick 7,9 m
Cab Maxcab E270, hydraulically elevating
Machine shown in mirror image
K18Kinemat. Position I
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change. 15
7,0
12 ,8,8
7 ,1
7 ,999
9,7
10 ,0
10 ,5
7 ,8
6,6
7 ,
7 ,
8,
8,
8,
8,
8,
6,
6,0
6,4
6,5
6,5
6,6
5,5
4,7
5,5 7
5,8
5,8
5,8
5,8
4,6
3,9
4,4 9
5,2
5,
5,
5,0
3,
4,3
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8m
201404160724567
Undercarriage MP42EPylon 2,5 m
Compact boom 10,1 mGrab stick 7,9 m
Cab Maxcab E270, hydraulically elevating
Machine shown inmirror image
K18Kinemat. Position Iot
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change.
16
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
11.6
12.6
8.0
6.1
5.7
5.7
6.0
8.7
9.3
9.8
10.3
10.4
9.6
8.7
8.3
7.0
7.2
7.4
7.8
8.1
8.3
8.5
8.2
7.8
7.1
6.1
6.1
6.1
6.2
6.3
6.5
6.7
6.9
7.0
7.1
6.9
6.6
6.0
5.3
5.5
5.5
5.5
5.6
5.7
5.8
6.0
6.0
6.0
5.9
5.6
5.2
4.5
4.6
5.0
5.0
5.1
5.1
5.2
5.3
5.3
5.3
5.2
4.8
4.4
3.8
4.6
4.6
4.6
4.7
4.7
4.7
4.6
4.5
4.4
4.1
3.7
4.0
4.2
4.2
4.2
4.1
4.1
3.9
3.7
3.4
5.8 5.2
15.5
5.2
6.8
5.2
m
Undercarriage MP41E Compact boom 10,8 m BananaGrab stick 7,9 m
Cab Maxcab E300/260, hydraulic elevating and forward moving (Option)
I.25072008075300 1
B18Kinemat. Position I
Machine shown in mirror image
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change.16
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
11.6.
12.6
8.08 08 08 0
6.1
5.7
5.7
6.06 0
88.78.8 7
9.3
9.8
10.3
10.4
9.6
8.7
8.38 3
7.07
7.2
7.47 4
7.8
8.1
8.3
8.5
8.2
7.8
7.171
6.1
6.16 1
6.1
6.2
6.3
6.56 5
6.7
6.9
7.0
7.1
6.9
6.6
6.06 0
5.3
5.55.55.55 5
5.5
5.5
5.6
5.75 7
5.8
6.0
6.0
6.06.0666666.66 00666666.06
5.9
5.6
5.25 2
4.5
4.64.64 6
05.0.0
5.0
5.1
5.15 1
5.2
5.3
5.3
5.35 3
5.2
4.8
4.44 4
3.8
64.6.6
4.6
4.64 6
4.7
4.7
4.7
4.64 6
4.5
4.4
14.11
3.73 7
4.0444
4.24 2
4.2
4.2
4.1
4.14 1
3.9
3.7
3.4
5.8 5.25.2
15.55
5.2
6.86 8
5.25.
m
Undercarriage MP41E Compact boom 10,8 m BananaGrab stick 7,9 m
Cab Maxcab E300/260, hydraulic elevatingand forward moving (Option)
I.25072008075300 18I
B18Kinemat. Position Iia
Machine shown inmirror image
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change.
17
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
11,3
5,7
5,9
8,6
9,1
8,8
8,3
7,1
0
6,9
7,
7,3
7,6
7,
7,
6,
6,1
6,0
6,1
6,3
6,5
5,0
5,4
5,4
5,5
5,6
5,7
5,9
5,5
5,1
4,5
4,8
4,9
4,9
5,0
5,1
5,2
5,1
4,5
5
4,5
4,5
4,5
4,4
4,1
4,1
4,0
3,9
m
2,5 m
20140415153121
Undercarriage MP42EPylon 2,5 m
Compact boom 10,8 m BananaGrab stick 7,9 m
Cab Maxcab E270, hydraulisch hochfahrbar (Option)
B18Kinemat. Position I
Machine schown in mirror image
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoist cylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change. 17
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-7
-8
1111,33
5,,7
5,,9
8,8,666
9,1
8,8
8,3
7,1
000
6,66,99
7,
7,3
7,6
7,
7,
6,
6,1
6,0
6,6 11
6,3
6,5
5,,5 0
5,55 4
5,4
5,5 55
5,6
5,7
5,9
5,5
5,1
4,,5
4,4,8
44,4,99
4,4 99
5,0
5,1
5,2
5,1
44,4,4 555
5
4,5
4,5
4,5
4,4
4,1
4,1
4,0
3,9
m
2,5 m
201404151531211
Undercarriage MP42EPylon 2,5 m
Compact boom 10,8 m BananaGrab stick 7,9 m
Cab Maxcab E270, hydraulischhochfahrbar (Option)
B18Kinemat. Position Imat. Posit
Machine schown inmirror image
10567. In accordance with the EU standard, EN 474-5, material handling machines in hoist operation must be equipped with pipe fracture safety devices on the hoistcylinders and an overload warning device.
Lift capacities
Technical data and dimension information subject to change.
18 Dimensions in [mm]
Recommended grabs
Detailed information on grabs, as well as log grabs, quick-release systems, and other attach-ments can be found in the "Attachments" brochure
1) Weight information without grapple suspension, stick bolts, hose system
2) Half-open shells: shell sheet steel width 400 mm, 500 mm for 1250 l capacity and higher
*) Available upon request
Orange peel grab SGM (5 shells)
Design / sizeGrab
capacityWeight1 Maximum
piled density
SGZ l kg t / m³
1500.50 1500 19502.6
2000.50 2000 2200
2500.50 2500 23002.0
3000.50 3000 2490
4000.50 4000 2880 1.6
3000.50 L 3000 21401.0
3500.50 L 3500 2260
4000.50 L 4000 24800.8
4500.50 L 4500 2600
1500.50 HD 1500 22403.5
2000.50 HD 2000 2535
SGZ clamshell grab
Type series / model Power Weight Pull-off strength Lifting capacity in kg
WOKO kW kg kN Slab(safety factor 2)
S-RSL 15 12.2 1950 360 18000
S-RSL 17 17.0 2500 460 23000
S-RLB 13.5 10.0 1700 300 15000
S-RLB 15 11.7 2400 380 19000
S-RLB 17 17.8 3300 640 32000
Recommended magnetic generator: 15 kW/20 kW
Magnetic plates
Orange peel grab SGM (4 shells)Design / size Grab capacity
Weight1 Maximum piled densityShell form
HO G
SGM l kg kg t / m³
400.40-4 400 1570 1720
2.0
600.40-4 600 1600 1790
800.40-4 800 1685 1930
1000.40-4 1000 1755 2085
1250.40-4 1250 1850 2200
Design / size Grab capacityWeight1 Maximum
piled densityShell shape 2
HO G
SGM l kg kg t / m³
400.40 400 1820 1920
2.0
600.40 600 1910 2035
800.40 800 1960 2140
1000.40 1000 2040 2290
1250.40 1250 2180 2415
1400.40 1400 2250 2500
18 Dimensions in [mm]
Recommended grabs
Detailed information on grabs, as well as log grabs, quick-release systems, and other attach-ments can be found in the "Attachments" brochure
1) Weight information without grapplesuspension, stick bolts, hose system
2) Half-open shells: shell sheet steel width 400 mm,500 mm for 1250 l capacity and higher
*) Available upon request
Orange peel grab SGM (5 shells)
Design / sizeGrab
capacityWeight1 Maximum
piled density
SGZ l kg t / m³
1500.50 1500 19502.6
2000.50 2000 2200
2500.50 2500 23002.0
3000.50 3000 2490
4000.50 4000 2880 1.6
3000.50 L 3000 21401.0
3500.50 L 3500 2260
4000.50 L 4000 24800.8
4500.50 L 4500 2600
1500.50 HD 1500 22403.5
2000.50 HD 2000 2535
SGZ clamshell grab
Type series / model Power Weight Pull-off strength Lifting capacityin kg
WOKO kW kg kN Slab(safety factor 2)((
S-RSL 15 12.2 1950 360 18000
S-RSL 17 17.0 2500 460 23000
S-RLB 13.5 10.0 1700 300 15000
S-RLB 15 11.7 2400 380 19000
S-RLB 17 17.8 3300 640 32000
Recommended magnetic generator: 15 kW/20 kW
Magnetic plates
Orange peel grab SGM (4 shells)Design / size Grab capacity
Weight1 Maximumpiled densityShell form
HO G
SGM l kg kg t / m³
400.40-4 400 1570 1720
2.0
600.40-4 600 1600 1790
800.40-4 800 1685 1930
1000.40-4 1000 1755 2085
1250.40-4 1250 1850 2200
Design / size Grab capacityWeight1 Maximum
piled densityShell shape 2
HO G
SGM l kg kg t / m³
400.40 400 1820 1920
2.0
600.40 600 1910 2035
800.40 800 1960 2140
1000.40 1000 2040 2290
1250.40 1250 2180 2415
1400.40 1400 2250 2500
19
3000
4150
540061
6091
40
6500
5050
195
50655590
3480
2,5 m 2,5 m
36006825
3495
3000
6495
2600
44654880
120
3675
3450
2650
6100
3295
55006025
835 M with undercarriage MP41 and hydraulically elevating cab type E270
835 M with undercarriage MP41 and hydraulically elevating and forward moving cab type E300/260
835 M with undercarriage MP42 and hydraulically elevating and forward moving cab type E300/260
Dimensions
Technical data and dimension information subject to change.
Transport width 3000 mm
19
3000
4150
540061
6091
40
6500
5050
195
50655590
3480
2,5 m 2,5 m
36006825
3495
3000
6495
2600
44654880
120
3675
3450
2650
6100
3295
55006025
835 M with undercarriage MP41 and hydraulically elevating cab type E270
835 M with undercarriage MP41 and hydraulically elevating and forward moving cab type E300/260
835 M with undercarriage MP42and hydraulically elevating and forward moving cab type E300/260
Dimensions
Technical data and dimension information subject to change.
Transport width3000 mm
www.sennebogen.com
SENNEBOGEN Maschinenfabrik GmbH Sennebogenstraße 1094315 Straubing, Germany
Tel. +49 9421 540-144/[email protected] It
em N
o. 17
9545
835M
-E-1
1141
0-06
1510
-091
610-
0318
10-0
2191
0
Loading boom Grab stick Transport length (L) Transport heigth (H)
K16 9.1 m 6.9 m 13.5 m 3.45 mK18 10.1 m 7.9 m 14.5 m 3.45 mB18 10.8 m Banana 7.9 m 15.0 m 3.45 mK16 ULM 9.1 m 6.6 m 13.5 m 3.45 m
L
H
Transport dimensions 835 M with undercarriage type MP41E
SENNEBOGEN Maschinenfabrik. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary in a tolerance range depending on the country to which the machines are delivered, especially in regard to standard and optional equipment
All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.
expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing/Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.
www.sennebogen.com
Loading boom Grab stick Transport length (L) Transport heigth (H)
K16 9.1 m 6.9 m 13.5 m 3.45 mK18 10.1 m 7.9 m 14.5 m 3.45 mB18 10.8 m Banana 7.9 m 15.0 m 3.45 mK16 ULM 9.1 m 6.6 m 13.5 m 3.45 m
L
H
Transport dimensions 835 M with undercarriage type MP41E