leading through innovation - sennebogen · technical specifications sennebogen rubber tired...

8
Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating Weight M/rubber tired 100,900 lb (45,360 kg) Leading Through Innovation Reach standard 51'6" (16 m) (stick pin) optional up to 58'6" (18 m) (stick pin) Magnet System rating 25 kW

Upload: trinhthien

Post on 01-Jul-2018

226 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

Technical SpecificationsSENNEBOGEN Rubber Tired Material Handler

EngineModel Cummins QSL9, Tier 4 FinalNet Power 305 HP (224 kW)

Operating WeightM/rubber tired 100,900 lb (45,360 kg)

Leading Through InnovationReachstandard 51'6" (16 m) (stick pin)optional up to 58'6" (18 m) (stick pin)

Magnet Systemrating 25 kW

Page 2: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

2 Subject to technical modification.

Technical Specifications 835 M “E”SWING SYSTEMswing speed 0 - 8 rpmswing hydraulic open loopdrive 2 x axial piston motor driving planetary gearbox, integrated brake valvesswing brake multidisc brake, spring loadedswing bearing external teeth, sealed ball bearing

TRAVEL / UNDER CARRIAGEtype rubber tired MP41Edrive system all-wheel drive variable displacement motor with dual stage power shift transmissiontravel speed 1st 0-3.4 mph (0-5.4 km/h) 2nd 0-12.0 mph (0-20 km/h)tires 8 x 12.00-24 (solid rubber)steering joystick steeringfront axle oscillating with hydraulic lock, integrated safety check valvesrear axle fixedservice brake disc brakeparking brake wet, multidisc brake spring loadedsafety travel alarm

REFILL CAPACITIESfuel tank 165 gal (625 L)engine cooling system 15.85 gal (60.0 L)engine oil w / filter 7.53 gal (28.5 L)hydraulic tank 132 gal (500 L)hydraulic system 180 gal (680 L)swing gear (each) 1.06 gal (4.0 L)axle hub (front axle) 0.31 gal (1.2 L)axle hub (rear axle) 0.39 gal (1.5 L)axle differential (front axle) 6.9 gal (26.0 L)axle differential (rear axle) 5.1 gal (19.5 L)axle transmission 0.8 gal (3.0 L)swing ring lubrication reservoir 0.26 gal (1.0 L)central lubrication reservoir 5.5 lb (2.5 kg)diesel exhaust fluid 7.93 gal (30 L)

MAGNET SYSTEMrating 25 kWvoltage (magnetized) 230 Vcurrent (cold condition) 109 Ampscontroller Hubbellgenerator Baldordrive hydraulic

ENGINEmodel Cummins QSL9-C300type in-line, 6 cylinder, cooled exhaust gas recirculation, water cooledemission EPA Tier 4 Final net power 305 HP (224 kW) @ 2,000 rqminjection high pressure common-raildisplacement 8.9 L (543.1 cu.in.)bore 4.49 in (114 mm)stroke 5.69 in (145 mm)aspiration turbo charged, charge air cooledfuel tank 165 gal (625L)air filtration direct flow filtration system dual stage filter with pre-filtercontrol integrated ECM automatic idle - stop eco mode

ELECTRICALalternator 100 V/Ahstarter 24 Vm 7.8 kWbattery 2 x 12 V, 150 Ahlights 2 x cab roof, type halogen 2 x frame upper carriage, type H4

HYDRAULIC SYSTEMsystem type LUDV load sensing pilot pressure controlled open centerpump type variable-displacement axial-piston pumpmax. pump flow 196 gpm (740 l / m)max. pressure 5,076 psi (350 bar)hydraulic tank 132 gal (500 L)hydraulic system 180 gal (680 L)filtration dual filtration system 3 micron (HydroClean)

COOLINGcooling type cool-on-demand, suction-type fan system, side by sidehydraulic / water hydraulic fan drive axial piston pump, reversible fan thermo- statically controlled, closed loop system charge air direct fan drive

WEIGHToperating weight 100,000 lb (45,360 kg)

Page 3: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

3Subject to technical modification.

Standard / Optional Equipment 835 M “E”ENGINEWater separator in fuel line Automatic idle / engine stop control Eco mode Visual fuel tank check Engine block & water separator pre-heater

ELECTRICBattery disconnect switch Centralized fuse box Battery jump start connection from ground level

HYDRAULICPilot pressure controlled variable displacement pump Thermostatically controlled cooling system Centralized hydraulic test ports Protection covers for pilot pressure control valves 3 micron dual filtration system Load sensing, flow on demand hydraulic system Optimized hydraulic pump regulation (GLR) Visual hydraulic tank check from ground level Attachments open, close & rotation hydraulics Hydraulic tank shut off valve Electrical hydraulic tank pre-heater Biodegradable hydraulic oil Hydraulic circuit for scrap shear Hydraulic circuit for hammer, breaker Additional hydraulic circuits Attachment return filtration filters (60 µm)

UPPER CARRIAGERearview & right side view camera system Automatic lubrication system Anti-slip mats on walking area Lockable side doors Handrails on top of upper carriage Mirror left side Turning signal lights in upper carriage frame Removable panels Additional light package Custom colors Seawater paint coating

OPERATORS CAB (maXCab)Hydraulic elevating cab system E260 Multi adjustable, air suspended operators seat 3” (76 mm) seat belt Seat heater Automatic climate control (heater / AC) Air outlets w / defroster Storage area for lunch box Large cup holder Fire extinguisher Tinted windows with safety glass Door window as sliding window AM / FM Radio with CD player & speakers Removable floor mat SenCon diagnostic system Multicolor Monitor Tilt out front window Halogen light package on cab roof Mechanical hour meter Sliding door Catwalk w / handrail 12 V / 24 V power outlet Windshield wiper and washers Emergency exit hammer Safety lever Sun shade Interior lighting Rain cover front window Outside mirror

OPERATORS CAB (maXCab)Optical and acoustic warning system Positive filtered ventilation (pressurized cab) Safety check valves for elevating cab cylinder Foot rest maXCab industry Windshield protection guard Skylight protection guard Skylight FOPS guard Bullet proof windshield Bullet proof skylight Polycarbonate side windows Additional light package Fixed cab elevation Hydraulic elevating up and out cab E300/260 Operators cab with floor window Steering column instead of joystick steering Steering column in combination with joystick steering Additional cameras

UNDERCARRIAGERobust designed material handling under carriage Heavy duty axles Solid rubber tires 12.00-24 (8x) incl. intermediate ring Front axle oscillating w/axle unlock (travel position) Dual stage power shift transmission Drive train protection guards Travel alarm Centralized lubrication points 2 circuit servo brake system 4-point outriggers w/integrated safety check valves in outrigger cylinders Tool and storage compartments, lockable Individual outrigger control Increased size outrigger pads to decrease ground pressure Pneumatic tires Towing hitch package

WORKING EQUIPMENTPurpose built material handling boom Purpose built material handling stick Attachment hydraulic line connections with ball valves Boom position 1 Safety check valves for stick cylinders Safety check valves for boom cylinders Cylinder end position dumping Boom hoist limitation Bronze bushings connected to automatic lubrication system Stick limitation Halogen light package boom Purpose built material handling stick with reversing linkage Purpose built material handling boom for scrap shears Boom position 2

MAGNET SYSTEMHydraulic driven generator Magnet controller Magnet suspension link

ATTACHMENTSOrange peel grapple Mag grapple Clamshell Magnet Log grapple Scrap shear Power attachment Pipe handler Live heel

SWING SYSTEM360° protection cover, removable Manual operated swing gear pinion lubrication system

Standard Equipment Optional Equipment

Page 4: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

4

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

50 10 15 20 25 30 35 40 45 50

Meters Feet

0

2

1

4

3

6

5

-6

-4

-5

-2

-3

-1

8

7

10

9

12

11

14

13

16

15

17

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

55

[12.6]

[13.6]

[14.8]

[15.6]

[15.8]

[10.2]

[8.9]

[8.8]

[7.7]

[9.0]

[9.8]

[10.0]

[10.2]

[10.6]

[11.1]

[11.7]

[12.2]

[12.3]

[11.9]

[11.0]

[9.5]

[5.8]

[7.8]

[8.8]

[8.8]

[8.9]

[9.1]

[9.4]

[9.7]

[9.9]

[10.0]

[9.7]

[9.0]

[8.0]

[5.9]

[7.6]

[7.8]

[7.9]

[8.0]

[8.2]

[8.3]

[8.4]

[8.3]

[8.0]

[7.5]

[6.6]

[5.5]

[7.0]

[7.0]

[7.1]

[7.2]

[7.2]

[7.2]

[7.1]

[6.8]

[6.3]

[5.4]

[6.2]

[6.3]

[6.3]

[6.3]

[6.2]

[6.0]

[5.7]

[5.1] [3.9]

[4.3]

[5.4]

[5.4]

[5.3]

[5.0]

[4.5]

27,778

29,983

32,628

34,392

34,833

22,487

19,621

19.400

16,975

19,841

21,605

22,046

22,487

23,369

24,417

25,794

26,896

27,117

26,235

24,251

20,944

12,787

17,196

19,400

19,400

19,621

20,062

20,723

21,385

21,826

22,046

21,385

19,841

17,637

13,007

16,755

17,196

17,416

17,637

18,078

18,298

18,519

18,298

17,637

16,535

14,550

12,125

15,432

15,432

15,653

15,873

15,873

15,873

15,653

14,991

13,889

11,905

13,669

13,889

13,889

13,889

13,669

13,228

12,566

11,243

9,480

11,905

11,905

11,684

11,023

9,921

8,598

31,305

44,321

29,762

11,684

10,141

11,023

[14.2]

[20.1]

[13.5]

[5.3]

[4.6]

[5.0]

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

K16-1

Working Equipment K16-1

reach 51'6" (15.69 m)boom 29'10" (9.1 m)stick 22'8" (6.9 m)boom pos. 1

Operator’s Cab

model E270 maXCab hydraulic elevating up 8'8" (2.65 m) elevation eye level approx. 19' (5.8 m)

Undercarriage

model MP41E 4-point outriggerstires 8 x 12.00-24 solid rubber

machine shown in mirror image

Lift Capacities835 M “E”

Page 5: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

5

[13.2]

[14.2]

[14.9]

[11.7]

[7.4]

[6.5]

[6.5]

[9.8]

[10.2]

[10.7]

[11.2]

[11.6]

[11.6]

[11.3]

[10.5]

[9.2]

[7.6]

[7.3]

[8.0]

[8.2]

[8.2]

[8.4]

[8.7]

[8.9]

[9.2]

[9.4]

[9.4]

[9.2]

[8.6]

[7.8]

[6.6]

[6.6]

[7.2]

[7.3]

[7.3]

[7.4]

[7.5]

[7.7]

[7.8]

[7.9]

[7.9]

[7.7]

[7.2]

[6.6]

[5.6]

[5.5]

[6.0]

[6.5]

[6.5]

[6.6]

[6.6]

[6.7]

[6.8]

[6.8]

[6.7]

[6.5]

[6.1]

[5.5]

[4.7]

[5.3]

[5.7]

[5.9]

[5.9]

[5.9]

[5.9]

[5.9]

[5.9]

[5.8]

[5.5]

[5.2]

[4.6]

[3.8]

[4.9]

[5.3]

[5.3]

[5.2]

[5.2]

[5.1]

[4.9]

[4.7]

[4.3]

[3.7]

[4.5]

[4.6]

[4.5]

[4.4]

[4.2]

[3.9]

[3.4]

[19.5]

[9.5]

[3.9]

[3.4]

[3.8]

[7.2]

[7.3] [6.2]

29,101

31,305

32,849

25,794

16,314

14,330

14,330

21,605

22,487

23,589

24,692

25,573

25,573

24,912

23,148

20,282

16,755

16,094

17,637

18,078

18,078

18,519

19,180

19,621

20,282

20,723

20,723

20,282

18,960

17,196

14,550

14,550

15,873

16,094

16,094

16,314

16,535

16,975

17,196

17,416

17,416

16,975

15,873

14,550

12,346

12,125

13,228

14,330

14,330

14,550

14,550

14,771

14,991

14,991

14,771

14,330

13,448

12,125

10,362

11,684

12,566

13,007

13,007

13,007

13,007

13,007

13,007

12,787

12,125

11,464

10,141

8,377

10,803

11,684

11,684

11,464

11,464

11,243

10,803

10,362

9,480

8,157

9,921

10,141

9,921

9,700

9,259

8,598

7,496

16,094 13,669

42,990

20,944

8,598

7,496

8,377

15,873

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

50 10 15 20 25 30 35 40 45 50 55

Meters Feet

0

2

1

4

3

6

5

-6

-4

-5

-2

-3

-1

8

7

10

9

12

11

14

13

16

15

17

18

19

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

55

60

65

Lift Capacities835 M “E”

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

K18-1

Working Equipment K18-1

reach 57'8" (17.58 m)boom 33'2" (10.1 m)stick 25'11" (7.9 m)boom pos. 1

Operator’s Cab

model E270 maXCab hydraulic elevating up eye level approx. 19' (5.8 m)

Undercarriage

model MP41E 4-point outriggerstires 8 x 12.00-24 solid rubber

machine shown in mirror image

Page 6: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

6

25,573

27,778

29,542

17,637

13,448

12,566

12,566

13,228

19,180

20,503

21,605

22,707

23,148

22,928

21,164

19,180

18,298

15,432

15,873

16,314

17,196

17,857

18,298

18,739

18,739

18,078

17,196

15,653

13,448

13,448

13,448

13,669

13,889

14,330

14,859

15,212

15,432

15,653

15,653

15,212

14,550

13,228

11,684

12,125

12,125

12,125

12,346

12,566

12,787

13,228

13,228

13,448

13,228

13,007

12,346

11,464

9,921

10,141

11,023

11,023

11,234

11,243

11,464

11,683

11,684

11,684

11,464

11,243

10,582

9,700

8,377

10,141

10,141

10,141

10,362

10,362

10,362

10,141

9,921

9700

9,039

8,157

8,818

9,259

9,259

9,259

9,039

9,039

8,598

8,157

7,496

12,787 11,464

34,171

38,801

11,684

7,275

7,275

8,157

11,464

14,991

11,464

[11.6]

[12.6]

[13.4]

[8.0]

[6.1]

[5.7]

[5.7]

[6.0]

[8.7]

[9.3]

[9.8]

[10.3]

[10.5]

[10,4]

[9.6]

[8.7]

[8.3]

[7.0]

[7.2]

[7.4]

[7.8]

[8.1]

[8.3]

[8.5]

[8.5]

[8.2]

[7.8]

[7.1]

[6.1]

[5.8]

[6.1]

[6.1]

[6.2]

[6.3]

[6.5]

[6.7]

[6.9]

[7.0]

[7.1]

[7.1]

[6.9]

[6.6]

[6.0]

[5.3]

[5.2]

[5.5]

[5.5]

[5.5]

[5.6]

[5.7]

[5.8]

[6.0]

[6.0]

[6.1]

[6.0]

[5.9]

[5.6]

[5.2]

[4.5]

[4.6]

[5.0]

[5.0]

[5.1]

[5.1]

[5.2]

[5.3]

[5.3]

[5.3]

[5,2]

[5.1]

[4.8]

[4.4]

[3.8]

[4.6]

[4.6]

[4.6]

[4.7]

[4.7]

[4.7]

[4.6]

[4.5]

[4,4]

[4.1]

[3.7]

[4.0]

[4.2]

[4.2]

[4.2]

[4.1]

[4.1]

[3.9]

[3.7]

[3.4]

[15.5]

[17.6]

[5.3]

[3.3]

[3.3]

[3.7]

[5.2]

[6.8]

[5.2]

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

50 10 15 20 25 30 35 40 45 50 55

Meters Feet

0

2

1

4

3

6

5

-6

-4

-5

-8

-7

-2

-3

-1

8

7

10

9

12

11

14

13

16

15

17

18

0

5

10

15

20

25

30

-10

-5

-15

-20

-25

35

40

45

50

55

60

Lift Capacities835 M “E”

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

B18-1

Working Equipment B18-1

reach 58'6" (17.83 m)boom 35'5" (10.8 m)stick 25'11" (7.9 m)boom pos. 1

Operator’s Cab

model E300/260 maXCab hydraulic elevating up & out (optional item) eye level approx. 20'4" (6.2 m)

Undercarriage

model MP41E 4-point outriggerstires 8 x 12.00-24 solid rubber

machine shown in mirror image

Page 7: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

7

18,960

19,400

26,676

28,880

30,864

32,187

28,219

18,298

16,755

16,314

19,180

20,503

20,503

20,944

21,826

22,928

23,810

24,692

24,471

23,369

20,944

17,637

16,314

17,637

17,637

17,857

18,298

19,400

19,621

19,621

18,739

16,975

14,550

13,669

15,432

15,432

15,432

15,653

16,094

16,314

16,314

16,094

15,212

13,889

11,684

12,346

13,669

13,669

13,669

13,669

13,669

13,669

13,228

12,566

11,243

9,259

11,905

11,905

11,905

11,684

11,464

10,803

10,141

8,598

9,921

9,700

9,259

8,598

7,496

31,746

42,990

16,535

7,275

7,055

8,598

[8.8]

[12.1]

[13.1]

[14.0]

[14.6]

[12.8]

[8.3]

[7.6]

[7.4]

[8.7]

[9.3]

[9.3]

[9.5]

[9.9]

[10.4]

[10.8]

[11.2]

[11.1]

[10.6]

[9.5]

[8.0]

[7.4]

[8.0]

[8.0]

[8.1]

[8.3]

[8.6]

[8.8]

[8.9]

[8.9]

[8.5]

[7.7]

[6.6]

[6.2]

[7.0]

[7.0]

[7.0]

[7.1]

[7.3]

[7.4]

[7.4]

[7.3]

[6.9]

[6.3]

[5.3]

[5.6]

[6.2]

[6.2]

[6.2]

[6.2]

[6.2]

[6.2]

[6.0]

[5.7]

[5.1]

[4.2]

[5.4]

[5.4]

[5.4]

[5.3]

[5.2]

[4.9]

[4.6]

[3.9]

[4.5]

[4.4]

[4.2]

[3.9]

[3.4]

[14.4]

[19.5]

[7.5]

[3.3]

[3.2]

[3.9]

Meters

Feet

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

50 10 15 20 25 30 35 40 45 50

Meters Feet

0

2

1

4

3

6

5

-6

-4

-5

-2

-3

-1

8

7

10

9

12

11

14

13

16

15

17

0

5

10

15

20

25

30

-10

-5

-15

-20

35

40

45

50

55

60

Lift capacities are stated in pounds. Values in [ ] are stated in metric tons. Indicated figures are based on ISO 10567 and do not exceed 75% or tipping and 87% of hydraulic capacity and machine standing on firm, level supporting surface. Loads are valid for 360° with machine support outriggers. Lifting capacities do not include working equipment such as orange peel grapples, magnets, clamshells, etc. The load point is the center line of the attachment pivot mounting pin on the stick. Their weights must be deducted from the numbers indicated in the lift charts. Please contact Sennebogen or your local dealer for optimum attachment selection. The operator / user of the machine should be fully acquainted with the operator’s & safety manual provided be Sennebogen. Capacities apply only to the machine as originally manufactured and equipped by Sennebogen.

K16-1ULM

Working Equipment K16-1 ULM

reach 50'11" (15.54 m)boom 29'10" (9.1 m)stick 21'8" (6.6 m) ULMboom pos. 1

Operator’s Cab

model E270 maXCab hydraulic elevating upeye level approx. 19' (5.8 m)

Undercarriage

model MP41E 4-point outriggerstires 4 x 12.00-24 solid rubber

machine shown in mirror image

Lift Capacities835 M “E”

Page 8: Leading Through Innovation - SENNEBOGEN · Technical Specifications SENNEBOGEN Rubber Tired Material Handler Engine Model Cummins QSL9, Tier 4 Final Net Power 305 HP (224 kW) Operating

SENNEBOGEN LLC 1957 Sennebogen TrailStanley, NC 28078, USA

Phone +1 (704) 347-4910Fax +1 (704) 347-8894Email [email protected]

835M

/E-0

315

“Under our policy of continuous improvements we reserve the right to change specifications, materials and design without prior notice. The illustrations shown may include optional equipment. See your SENNEBOGEN dealer for further information.” © 2015 SENNEBOGEN LLC, all rights reserved, printed in USA

GO FOR GREEN www.sennebogen-na.com

transport dimensions valid for boom position 1 only • boom bosition 2 may increase transport height & transport length • handrails, catwalks & other accessories are disassembled for transportation • *optional cab E300/260 will increase machine transport height by 2" (50 mm)

Reach Boom Length Stick Length Transport Length Transport Height H1* Transport Width

K16-1 29'10" (9,100 mm) 22'8" (6,900 mm) 44'4" (13,500 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)

K18-1 33'2" (10,100 mm) 25'11" (7,900 mm) 47'7" (14,500 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)

B18-1 35'5" (10,800 mm) 25'11" (7,900 mm) 49'3" (15,000 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)

K16-1 ULM 29'10" (9,100 mm) 21'8" (6,600 mm) 44'4" (13,500 mm) 11'4" (3,450 mm) 9'10" (3,000 mm)

Transport dimensions

14'7" (4,465)9'8" (3,000)

16' (4,880)

1'0"

(290

)4" (120

)

9" (265

)9'8" (3,000)2'2"

(675)

12'1" (3,675)

11'3

" (3,

450)

8'7"

(2,6

50)

20' (

6,10

0)

10'8" (3,295)

4'10

" (1,2

50)

4'9"

(1,4

90)

8'10

" (2,

740)

1'4"

(410

)

10'5" (3,200)18' (5,500)

19'8" (6,025)