The Alcatel 7300 ASAM IP Services Module (ISM) is the

latest step in the evolution of the market-leading Alcatel 7300

Advanced Services Access Manager (ASAM). With the growth

of broadband services, service providers require more

intelligent Internet protocol (IP)-based devices that provide

differentiated access services. The ISM is the first of the

Alcatel 7300 ASAM line of products to offer IP and broadband

remote access server (BRAS) functions and features in the

access network.

The ISM provides termination of asynchronous transfer

mode (ATM) encapsulation, session management, and IP

layer filtering and forwarding. The ISM optimizes provision-

ing and network management with virtual circuit (VC)

aggregation while it opens Ethernet connectivity to the

Alcatel 7300 ASAM. This provides open access to both ATM

and IP networks, enabling service providers to leverage the

benefits of both worlds. Located at the heart of the Alcatel

7300 ASAM, the ISM also enables advanced services,

such as IP-based video multicast.

ALCATEL 7300 ASAMIP Services Module (ETSI Version) | Release 4.2

Software

Protocols

Encapsulation protocols: RFC 1483/RFC 2684 (bridged,routed), PPPoA RFC 2364,PPPoE RFC 2516, L2TP, MPLS

Routing protocols: RIP, RIPv2,OSPFv2, BGP4, static routes

Packet forwarding

Tunneled and routed

Network management

ISM element management,graphical user interface, CLI, SNMP agent, Telnet

Subscriber awareness

Domain-based routing, VPN ID,IP address, PPP session

Address management

DHCP, NAT, local IP poolmanagement, RADIUS

VPN support

L2TP (LAC, LNS), virtual routing,MPLS

Accounting

Per session via RADIUS

Bandwidth management/traffic shaping

ATM traffic shaping (CBR, rt-VBR, nrt-VBR, UBR)

QoS

QoS-marking, prioritydifferentiated forwarding

Capacity

100,000 packets per second(aggregate)

90 Mb/s aggregate traffic over Ethernet LAN interface

45 Mb/s aggregate traffic over ATM WAN interface

Multicast

IGMP v2.0 ATM point-to-multipoint

controlled by IGMP

Security

IP filter, tunnel policies,PAP/CHAP and RADIUSauthentication, stateless firewall,admin password protection

Advanced features

Routing filters through subscriber session

Hardware

System

Dual-slot blade in an Alcatel 7300 ASAM

Height: 42 cm (16.53 in.) Width: 22 cm (8.66 in.) Weight: 1.75 kg (3.86 lb.) Power: 25 W LED indicators: full/half duplex,

10/100, link connected, traffic activity

Operating requirements

Temperature: -5 C to +50 C(23 F to 122 F)

Altitude: -61 m to 3,962 m (-200 ft. to 13,000 ft.)

Relative humidity: 5% to 95%

Safety certifications

GR-1089, UL 1950

Emissions

GR-1089, FCC Part 15

Server card features

Processor: QED RM 5000 Class DRAM: 128 MB Flash ROM: 32 MB PCMCIA slots: N/A Serial ports: TIA/EIA-232 frontal 10/100Base-T/TX: 4 ports Software upgrade: yes

LAN interfaces

10/100 Ethernet

WAN interfaces

nxE1, E3/DS3, STM-1 through the Alcatel 7300 ASAM

Management Element management layer

(EML) via Alcatel 5523 AWSElement Manager (AWS)

Network management layer(NML) via Alcatel 5620Network Manager (NM) Connectivity via ATM network

(ATM VP/VC) Service management layer (SML)

via Alcatel 5620 DSL SubscriberModule (DSL SM) Interfacing with other (legacy)

operations support systems(OSSs)

Local management via craftterminal

Subscriber management with Alcatel 5735 ServiceManagement Center (SMC)

Technical Summary ISM FOR THE ALCATEL 7300 ASAM | RELEASE 4.2

www.a l ca t e l . c om/ds l

Alcatel and the Alcatel logo are registeredtrademarks of Alcatel. All other trademarksare the property of their respective owners.Alcatel assumes no responsibility for theaccuracy of the information presented,which is subject to change without notice.

12 2001 Alcatel. All rights reserved.

3CL 00469 0210 TQZCA Ed.01 11664