User Manual

60007

Keep these instructions for future reference as they contain important information.

Adult installation required. Accessories not included.

Seat Guardian™

1 2

Instructions

Installation:

1. Unbuckle head restraint strap at top of back panel.

2. Place Seat Guardian™ in center of desired seating location. (Fig. A)

3. If vehicle is equipped with a head restraint in desired seating location, attach head

restraint strap around vehicle head restraint and adjust strap length to position

back panel of Seat Guardian™ at desired/proper height. (Fig. B)

NOTE: For intallations in vehicles without a head restraint, the back panel may

need to be folded to prevent the back panel from falling over. (Fig. C)

Removal:1. Remove child safety seat.

2. Unbuckle head restraint strap and remove Seat Guardian™ from vehicle.

3. Store in a cool, dry place.

Care: Surface Wash.

(Fig. A) (Fig. B) (Fig. C)

IMPORTANT NOTE: Always install the child safety seat in accordance to the child safety seat manufacturer’s

installation instructions. Adjust positon of Seat Guardian™ as needed to center child safety seat on Seat Guardian™.

Questions?Retain this address for future reference.

USA©2012 BRICA, Inc., 500 West 5th Street,

Suite 220, Charlotte, NC 282021.866.869.8257 • brica.com

Australia CNP Brands, PO Box 8 Deer Park VIC 3023

1 300 667 137 • cnpbrands.com.auPrinted in China

making together better®