5.functional groups
TRANSCRIPT
-
8/13/2019 5.Functional Groups
1/47
1
Functional Groups
Afunctional group is an atom or a group of atoms withcharacteristic chemical and physical properties.It is thereactive part of the molecule.
Most organic compounds have CC and CH bonds.However, many organic molecules possess otherstructural features:
Heteroatomsatoms other than carbon or hydrogen.
Bondsthe most common bonds occur in CCand CO double bonds.
These structural features distinguish one organicmolecule from another. They determine a moleculesgeometry, physical properties, and reactivity, andcomprise what is called a functional group.
Introduction to Organic Molecules and Functional Groups
-
8/13/2019 5.Functional Groups
2/47
2
Heteroatoms and bonds confer reactivity on a particularmolecule.
Heteroatoms have lone pairs and create electron-deficient sites on carbon.
Bonds are easily broken in chemical reactions. Abond makes a molecule a base and a nucleophile.
Dont think that the CC and CH bonds are unimportant.They form the carbon backbone or skeleton to which the
functional group is attached.
-
8/13/2019 5.Functional Groups
3/47
3
Ethane: This molecule has only CC and CH bonds, so it hasno functional group. Ethane has no polar bonds, no lone pairs,and no bonds, so it has no reactive sites. Consequently, ethaneand molecules like it are very unreactive.
Ethanol: This molecule has an OH group attached to itsbackbone. This functional group is called a hydroxy group.Ethanol has lone pairs and polar bonds that make it reactive with
a variety of reagents.The hydroxy group makes the properties of ethanol verydifferent from the properties of ethane.
-
8/13/2019 5.Functional Groups
4/47
4
Hydrocarbons are compounds made up of only the elementscarbon and hydrogen. They may be aliphatic or aromatic.
-
8/13/2019 5.Functional Groups
5/47
5
OHH2SO4
OH H OSO3H
OH2+ HSO4
H2SO4H3C CH3 No Reaction
OHNaH
OH
Na H O + H2Na
NaHH3C CH3
No Reaction
-
8/13/2019 5.Functional Groups
6/47
6
Aromatic hydrocarbons are so named because many of theearliest known aromatic compounds had strong characteristicodors.
The simplest aromatic hydrocarbon is benzene. The six-membered ring and three bonds of benzene comprise a singlefunctional group.
When a benzene ring is bonded to another group, it is called a
phenyl group.
-
8/13/2019 5.Functional Groups
7/47
7
-
8/13/2019 5.Functional Groups
8/47
8
-
8/13/2019 5.Functional Groups
9/47
9
Compounds Containing the C=O Group:
This group is called a carbonyl group.
The polar CO bond makes the carbonyl carbon anelectrophile, while the lone pairs on O allow it to reactas a nucleophile and base.
The carbonyl group also contains a bond that is moreeasily broken than a CO bond.
-
8/13/2019 5.Functional Groups
10/47
10
It should be noted that the importance of a functionalgroup cannot be overstated.
A functional group determines all of the followingproperties of a molecule:
Bonding and shape
Type and strength of intermolecular forces
Physical properties
Nomenclature
Chemical reactivity
-
8/13/2019 5.Functional Groups
11/47
11
Which of the following is an aldehyde?
H3CH2CH2C
O
CH3 H3CH2CH2C
O
H
H3CH2CH2C
O
OH
H3CH2CH2C
O
CH3
A B
CD
H3CH2CH2C
O
H
B
-
8/13/2019 5.Functional Groups
12/47
12
Which of the following is an ester?
H3CH2CH2C
O
CH3 H3CH2CH2C
O
NH2
H3CH2CH2C
O
OH
H3CH2CH2C
O
A B
CD
O
CH3
H3CH2CH2C
O
C
O
CH3
-
8/13/2019 5.Functional Groups
13/47
13
Which of the following is an amide?
H3CH2CH2C
O
CH3 H3CH2CH2C
O
NH
H3
CH2
CH2
C
O
OHH2
N
A B
CD
O
CH3
CH2CH3
H3CH2CH2C
O
NH
B
CH2CH3H2N
C
O
CH3
-
8/13/2019 5.Functional Groups
14/47
14
Intermolecular Forces
Intermolecular forces are interactions that exist betweenmolecules. Functional groups determine the type andstrength of these interactions.
There are several types of intermolecular interactions.
Ionic compounds containoppositely charged particlesheld together by extremelystrong electrostatic inter-
actions. These ionic inter-actions are much strongerthan the intermolecular forcespresent between covalent
molecules.
-
8/13/2019 5.Functional Groups
15/47
15
Covalent compounds are composed of discretemolecules.
The nature of the forces between molecules depends onthe functional group present. There are three differenttypes of interactions, shown below in order ofincreasing strength:
van der Waals forces
dipole-dipole interactions
hydrogen bonding
-
8/13/2019 5.Functional Groups
16/47
16
van der Waals Forces
van der Waals forces are also known as London forces.
They are weak interactions caused by momentary changes inelectron density in a molecule.
They are the only attractive forces present in nonpolarcompounds.
Even though CH4has nonet dipole, at any oneinstant its electron densitymay not be completelysymmetrical, resulting in atemporary dipole. This can
induce a temporary dipolein another molecule. Theweak interaction of thesetemporary dipolesconstitutes van der Waals
forces.
-
8/13/2019 5.Functional Groups
17/47
17
All compounds exhibit van der Waals forces.
The surface area of a molecule determines the strength of thevan der Waals interactions between molecules. The larger thesurface area, the larger the attractive force between twomolecules, and the stronger the intermolecular forces.
Figure 3.1Surface area and
van der Waals forces
-
8/13/2019 5.Functional Groups
18/47
18
van der Waals forces are also affected by polarizability.
Polarizability is a measure of how the electron cloud around an
atom responds to changes in its electronic environment.
Larger atoms, like iodine,which have more looselyheld valence electrons,
are more polarizable thansmaller atoms likefluorine, which have moretightly held electrons.Thus, two F2molecules
have little attractive forcebetween them since theelectrons are tightly heldand temporary dipolesare difficult to induce.
-
8/13/2019 5.Functional Groups
19/47
19
Dipole-Dipole Interactions
Dipoledipole interactions are the attractive forces betweenthe permanent dipoles of two polar molecules.
Consider acetone (below). The dipoles in adjacent moleculesalign so that the partial positive and partial negative chargesare in close proximity. These attractive forces caused by
permanent dipoles are much stronger than weak van der Waalsforces.
-
8/13/2019 5.Functional Groups
20/47
20
Hydrogen bonding typically occurs when a hydrogenatom bonded to O, N, or F, is electrostatically attractedto a lone pair of electrons on an O, N, or F atom inanother molecule.
Hydrogen Bonding
-
8/13/2019 5.Functional Groups
21/47
21
Note: as the polarity of an organic molecule increases, sodoes the strength of its intermolecular forces.
-
8/13/2019 5.Functional Groups
22/47
22
What type of intermolecular forces are exhibited by eachmolecule?
N
O
OH
VDW VDW and DD
VDW, DDand HB
VDW
-
8/13/2019 5.Functional Groups
23/47
23
Physical PropertiesBoiling Point
The boiling point of a compound is the temperature at whichliquid molecules are converted into gas.
In boiling, energy is needed to overcome the attractive forcesin the more ordered liquid state.
The stronger the intermolecular forces, the higher theboiling point.
For compounds with approximately the same molecularweight:
-
8/13/2019 5.Functional Groups
24/47
24
Consider the example below. Note that the relativestrength of the intermolecular forces increases from
pentane to butanal to 1-butanol. The boiling points ofthese compounds increase in the same order.
For two compounds with similar functional groups: The larger the surface area, the higher the boiling point.
The more polarizable the atoms, the higher the boilingpoint.
-
8/13/2019 5.Functional Groups
25/47
25
Consider the examples below which illustrate the effect ofsize and polarizability on boiling points.
Figure 3.2Effect of surface area and
polarizability on boiling point
-
8/13/2019 5.Functional Groups
26/47
26
Which has the higher boiling point and why?
O
AB
A has only VDW, while B has both
VDW and DD interactions
O
B
-
8/13/2019 5.Functional Groups
27/47
27
AB
O
OHH3CH2C
O
OCH3H3CH2C
A
O
OHH3CH2C
A had VDW, DDD and H-bonding, while B
lacks H-bonding
-
8/13/2019 5.Functional Groups
28/47
28
H3C
(CH2)5
H3
C
H3C
(CH2)20
H3C
A B
H3C
(CH2)20
H3C
B
Both A and B only have VDW interactions, butB has the higher bp b/c of a larger surfacearea.
-
8/13/2019 5.Functional Groups
29/47
29
The melting point is the temperature at which a solid isconverted to its liquid phase.
In melting, energy is needed to overcome the attractive
forces in the more ordered crystalline solid. The stronger the intermolecular forces, the higher the
melting point.
Given the same functional group, the more symmetrical
the compound, the higher the melting point.
Melting Point
-
8/13/2019 5.Functional Groups
30/47
30
Because ionic compounds are held together byextremely strong interactions, they have very high
melting points. With covalent molecules, the melting point depends
upon the identity of the functional group. Forcompounds of approximately the same molecular
weight:
-
8/13/2019 5.Functional Groups
31/47
31
The trend in melting points of pentane, butanal, and 1-butanol parallels the trend observed in their boiling
points.
-
8/13/2019 5.Functional Groups
32/47
32
Symmetry also plays a role in determining the melting points ofcompounds having the same functional group and similarmolecular weights, but very different shapes.
A compact symmetrical molecule like neopentane packs well intoa crystalline lattice whereas isopentane, which has a CH3groupdangling from a four-carbon chain, does not. Thus, neopentanehas a much higher melting point.
-
8/13/2019 5.Functional Groups
33/47
33
Which has the higher melting point and why?
NH2
BA
B has stronger intermolecular forces (DD andHBZ).
NH2
B
-
8/13/2019 5.Functional Groups
34/47
34
AB
A
Both only have VDW forces, so A has the highermp b/c it is more symmetrical. Closer packingmeans higher mp.
-
8/13/2019 5.Functional Groups
35/47
35
Solubility is the extent to which a compound, called asolute, dissolves in a liquid, called a solvent.
In dissolving acompound, theenergy needed to
break up theinteractionsbetween themolecules or ions
of the solute comesfrom newinteractionsbetween the soluteand the solvent.
Solubility
-
8/13/2019 5.Functional Groups
36/47
36
Compounds dissolve in solvents having similar kinds ofintermolecular forces.
Likedissolves like. Polar compounds dissolve in polar solvents. Nonpolar or
weakly polar compounds dissolve in nonpolar or weaklypolar solvents.
Water and organic solvents are two different kinds ofsolvents. Water is very polar and is capable of hydrogenbonding with a solute. Many organic solvents are eithernonpolar, like carbon tetrachloride (CCl4) and hexane
[CH3(CH2)4CH3], or weakly polar, like diethyl ether(CH3CH2OCH2CH3).
Most ionic compounds are soluble in water, but insolublein organic solvents.
-
8/13/2019 5.Functional Groups
37/47
37
An organic compound is water soluble only if it containsone polar functional group capable of hydrogen bonding
with the solvent for every five C atoms it contains. Forexample, compare the solubility of butane and acetone inH2O and CCl4.
-
8/13/2019 5.Functional Groups
38/47
38
Since butane and acetone are both organic compounds
having a CC and CH backbone, they are soluble inthe organic solvent CCl4. Butane, which is nonpolar, isinsoluble in H2O. Acetone is soluble in H2O because itcontains only three C atoms and its O atom canhydrogen bond with an H atom of H2O.
-
8/13/2019 5.Functional Groups
39/47
39
To dissolve an ionic compound, the strong ion-ioninteractions must be replaced by many weaker ion-dipole
interactions.
Figure 3.4Dissolving an ionic
compound in H2O
-
8/13/2019 5.Functional Groups
40/47
40
The size of an organic molecule with a polar functional groupdetermines its water solubility. A low molecular weight alcohol
like ethanol is water soluble since it has a small carbonskeleton of five C atoms, compared to the size of its polarOH group. Cholesterol has 27 carbon atoms and only one OHgroup. Its carbon skeleton is too large for the OH group tosolubilize by hydrogen bonding, so cholesterol is insoluble in
water.
-
8/13/2019 5.Functional Groups
41/47
41
The nonpolar part of a molecule that is not attracted to H2O issaid to be hydrophobic.
The polar part of a molecule that can hydrogen bond to H2O issaid to be hydrophilic.
In cholesterol, for example, the hydroxy group is hydrophilic,whereas the carbon skeleton is hydrophobic.
-
8/13/2019 5.Functional Groups
42/47
42
Which of the following are water soluable?
O
N
A B
C
O atom, 5 orless Cs
soluable
No O, N or F, nonpolar,not soluable
Has N, but more
than 5 Cs, so notsoluable
-
8/13/2019 5.Functional Groups
43/47
43
Influence of Functional Groups on Reactivity
Recall that:
Functional groups create reactive sites in molecules.
Electron-rich sites react with electron poor sites.
All functional groups contain a heteroatom, a bond or
both, and these features create electron-deficient (orelectrophilic) sites and electron-rich (or nucleophilic)sites in a molecule. Molecules react at these sites.
-
8/13/2019 5.Functional Groups
44/47
44
-
8/13/2019 5.Functional Groups
45/47
45
An electron-deficient carbon reacts with anucleophile, symbolized as :Nu.
An electron-rich carbon reacts with an electrophile,symbolized as E+.
For example, alkenes contain an electron rich doublebond, and so they react with electrophiles E+.
-
8/13/2019 5.Functional Groups
46/47
46
On the other hand, alkyl halides possess anelectrophilic carbon atom, so they react with electron-rich nucleophiles.
-
8/13/2019 5.Functional Groups
47/47
47
Considering only electron density, will each reactionoccur?
Cl
+ OH
E+ Nu-Yes
+ Br-
Nu- Nu-
No
O
ClO
+ OCH3
Nu-
E+
Yes