بسم ا الرحمن بسم ا الرحمن الرحيمالرحيم

The project is a complete industrial cycle. The project is a complete industrial cycle. The aims of the project areThe aims of the project are the production of new composite materials the production of new composite materials

with high quality and low cost, with high quality and low cost, development of a new method of manufadevelopment of a new method of manufa recycling of the industrial wastes. recycling of the industrial wastes. The project produces more than 40 The project produces more than 40

compounds suitable for more than 120 compounds suitable for more than 120 industries.industries.

Laser irradiation used in surface treatmentLaser irradiation used in surface treatment

Four stoke composite material Four stoke composite material machine with automatic control.machine with automatic control.

Molds for manufacturing of Molds for manufacturing of composite materials.composite materials.

Final composite material products Final composite material products such as (gears, nuts-----etc----).such as (gears, nuts-----etc----).

Semi final products such as (disks, Semi final products such as (disks, cylinders------etc------).cylinders------etc------).

Software for management and Software for management and define of the composite material define of the composite material project.project.

The results of the project are income generation, job creation, The results of the project are income generation, job creation, and vocational training.and vocational training.

UNIQUE & INNOVATIVEUNIQUE & INNOVATIVE **The project achieves two categories made The project achieves two categories made

and invented in Egypt.and invented in Egypt.*The composite material industry is a very *The composite material industry is a very

complicated technology. complicated technology. Our project changes these concepts Our project changes these concepts

completely.completely. *The project makes the composite material *The project makes the composite material

manufacturing economic and suitable for manufacturing economic and suitable for small industries scale. small industries scale.

*The patents are transferred to industry, new *The patents are transferred to industry, new technology is created. technology is created.

All steps of the project are done in Egypt All steps of the project are done in Egypt without any foreign experience. without any foreign experience.

The future developments in the project will try The future developments in the project will try to replace imported raw materials with to replace imported raw materials with Egyptian oneEgyptian one

Idea

Experiments

Patents

PrototypeTransfer to Industry

SoftwareSemi Automatic production line

Shoubra Company

N.I.L.E.S

Cairo university

Design & Research center

Al-ahram Science Club

EAST

Social fund

Media

قوالب التصنيع ذات السخانات المنفصلةقوالب التصنيع ذات السخانات المنفصلة

Molds

With

Separated

heaters

Steps of manufacturing

Treatment &

Machining

Manufacturing)Heating-pressing-

cooling(

Ore preparation

)Grinding+mixing(

استكمال التمويل

: خطة أعمال تفصيلية3 مرحلة

: خطة أعمال أولية2 مرحلة

: توصيف الفكرة1مرحلة

(البحث والتحليل)تقييم خارجي 1هيكلية الصفقة2

فريق الادارة1خطة التنفيذ2التمويل3

التسويق + المبيعات1نظام المشروع23

Oالفرص + المخاطر

قرار جديد بخطوات إضافية عند تحقيق الجنجاز التالي

مستوى جنضوج الفكرة

الزمن

1summary 2product/service3marketing4&competition

مراحل تطوير خطة العمال

Raw materialpreparation

Waste recycling

Patents

Molds

Manufacturing

Laserirradiation

Fibertreatment

Nanoparticlespreparation

Composite material machine

+Control unit

+products

Storage

Machining department

م7

Orepreparation

10م10

Fabricated materialsFabricated materials

1-High strength to weight ratio1-High strength to weight ratio 2-Easy machining and shaping2-Easy machining and shaping 3-High resistance to environmental 3-High resistance to environmental

conditionsconditions 4-Long life time4-Long life time 5-Available in different shapes and 5-Available in different shapes and

colorscolors 6-Replace metal parts in many 6-Replace metal parts in many

applicationsapplications 7- Availability of waste recycling7- Availability of waste recycling 8-The big production line work with 8-The big production line work with

the same efficiency of small unitsthe same efficiency of small units 9- Biocompatibility (Used in medical 9- Biocompatibility (Used in medical

and environmental applications)and environmental applications)

SimpleDesign

Development

QualityPrice

Competition

Weakness1-about 70% of the raw materials required for manufacturing are imported and

not found in the Egyptian market2-qualified team work (engineers and Technicians) are necessary for project operation

To over come weakness the following steps will be followed:-New Patents are developed for manufacturing of raw materials in EgyptTraining center will be established to prepare the required human resources.

StrengthOur products have good quality and low cost. Our product is really competitive. We can say that, the products meet the customer needs. The competition with foreign product depends mainly on prices and competition with local products depends mainly on quality. The products have a wide range of applicationsProducts are widely different, divided into four category semi-final product, final products, composite material machine and production lines. Our production lines are suitable for small industries. The Egyptian market export similar products with about 700 million dollar every year.

Poverty Reduction income generation Economic Development job creation Transferability vocational training sustainability training and capacity building

معدات تجهيز العيناتمعدات تجهيز العينات

الذراع اللكترونية ووحدة التحكمالذراع اللكترونية ووحدة التحكم