40u cabinet setup guide -- a04

8/4/2019 40U Cabinet Setup Guide -- A04

1/12

40U Cabinet Setup Guide

P/N 014003099

REV A04

Tools Required

PhillipsScrewdriver

FlatScrewdriver

14-mm (9/16-in.)Socket Wrench

AdjustableWrench


2/12

Notice

Copyright 2002, 2003 EMC Corporation. All rights reserved.

Printed April, 2003

EMC believes the information in this publication is accurate as of its publication date. The information is subject tochange without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NOREPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THISPUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE.

Use, copying, and distribution of any EMC software described in this publication requires an applicable softwarelicense.

Trademark Information

EMC2, EMC, MOSAIC:2000, CLARiiON, Navisphere, and Symmetrix are registered trademarks and EMC Enterprise Storage, The Enterprise Storage Company, TheEMC Effect, Centera, Connectrix, ControlCenter, EDM, SDMS, SRDF, Timefinder, PowerPath, InfoMover, FarPoint, EMC Enterprise Storage Network, EMCEnterprise Storage Specialist, EMC Storage Logic, Universal Data Tone, E-Infostructure, Access Logix, MirrorView, SAN Copy, SnapView, and Celerra aretrademarks of EMC Corporation.

All other trademarks used herein are the property of their respective owners.


3/12

1

Important Notes

IMPORTANT The illustrations in this guide are examples only. Dependingon what you ordered, your configuration may look somewhat different fromwhat is shown here.

CAUTION Some EMC products, including Centera and Symmetrixsystems, are designed for installation by trained service personnel

only. Attempts by unqualified personnel to set up and start certainproducts may result in system damage and may void product

warranties. Contact your EMC representative for detailed

warranty, installation, and initialization policies.

!

Step 1Remove the front door (if present)

If your system includes a front door (for example, Centera systems), removethe door and set it aside, away from your installation area.

EMC2660

Rear


4/12

2

Step 2Remove the ramp and shipping material from the cabinet

1. Remove the plastic covering from the cabinet.

2. Remove the ramp bumper.

3. To release the ramp from the pallet, grasp the ramp, pull it straight backtoward you, then pull it straight up to free it from the screws.

EMC2134

Rotated 90

Rear


5/12

3

Step 3Attach the unloading ramp

1. Insert the ramp brackets into the pallet notches in the rear of the pallet.

EMC2135

Rear


6/12

4

Step 4Remove the cabinet shipping brackets

1. At the rear of the cabinet, open the door and remove the rear shippingbracket.

2. At the front of the cabinet, remove the bottom bezel, if necessary, and thefront shipping bracket.

Save the bolts. You may need them later to install optional stabilizer brackets.

EMC2136

DoorLatch

Rear

14-mm 9/16-in.)Socket Wrench

14-mm (9/16-in.)Socket Wrench

Front


7/12

5

Step 5Roll the cabinet down the ramp

IMPORTANT Make certain the leveling feet are secured in the UP positionbefore moving the cabinet. Secured feet allow the cabinet to roll off the rampand into position. If you need to adjust the leveling feet, use an adjustablewrench and turn the feet clockwise to raise them to the UP position.

WARNING! The cabinet is heavy. Make certain you have sufficient help andsecure footing before rolling the cabinet onto the ramp.

ATTENTION! L'armoire est lourde. Assurez-vous d'obtenir l'aide d'une personneet d'avoir un point d'appui sr avant d'installer l'armoire sur larampe.

ACHTUNG! Das Gestell ist schwer. Versichern Sie sich, dass Sie gengend Hilfe

haben und dass das Fundament gesichert ist, bevor Sie das Gestellauf die Rampe rollen.

ATTENZIONE! Poich il cabinet molto pesante assicurarsi di essere in un numerosufficiente di persone e di avere un appoggio sicuro prima dispingerlo sullo scivolo.

ADVERTENCIA! El bastidor es pesado. Asegrese de contar con ayuda suficiente yde tener un apoyo seguro antes de colocar el bastidor en la rampa.

EMC2137

LevelingFeet

Rear

Rails


8/12

6

Step 5Roll the cabinet down the ramp (Continued)

IMPORTANT Balance the cabinet from the sides; do not grasp the plastic

bezels or other components on the front of the cabinet.

EMC2148

Rear

Front

Step 6Position and level the cabinet

EMC2139

Front RearAdjustableWrench


9/12

7

Step 7Attach (optional) stabilizer brackets

If your system includes front and/or back stabilizer brackets, be sure thecabinet is in its final location before attaching them. Then use the shippingbracket bolts and mounting holes to attach the bracket(s) to the cabinet andfloor. (The additional brackets help to prevent the cabinet from tipping whileyou service cantilevered levels, or from rolling during minor seismic events.)

14-mm (9/16-in.)

Socket Wrench

Front

Stabilizer

Bracket EMC2662


10/12

8

Step 8Install the front door

If your system includes a front door for the cabinet (for example, Centerasystems), install the door now.

1. Position the lower hinge on the hinge bolt at the bottom of the cabinet.

2. Pull down the spring hinge bolt in the top of the door, and position itdirectly under the cabinet hinge.

3. Release the spring hinge and let it snap into place, securing the door to thecabinet.

On Door

On Cabinet

On Door

On Cabinet

Spring

Hinge

EMC2661


11/12

9

Step 9Remove the shipping plates

EMC2140

RemoveScrews

(4)

Pull Out,Lift Up

The shipping plates across therear of the cabinet provide rigidityduring shipping.

RearNote: The rear door is removed for clarity.

LoosenScrews(2)

Step 10Install cabinet trim

In some cases, the upper trim/bezel ships unattached from the cabinet.Unpack the trim kit, and push the bezel onto the ball studs at either side ofthe top front of the cabinet.

Ball Stud (2)

EMC2439


12/12

10

Your Next Step

IMPORTANT Refer to the setup guide(s) and/or hardware reference thatshipped with your system to continue with system and component setup.

If You Need Help

Contact EMC Customer Service by calling:

When you call, please have the following information available:

system/array model number

United States: 800-782-4362 (SVC-4EMC)

Canada: 800-543-4782(543-4SVC)

Worldwide: 508-497-7901

You can also obtain technical support and assistance by calling your localEMC sales office.

40u cabinet setup guide -- a04

Documents