3e · model 3e imo model 3e pumps are three screw, positive dis- placement, rotary pumps designed...
TRANSCRIPT
Typical 3E Nomenclature
Design Modification
(Assigned by IMO)
Series
3E
X
_J
Mechanical Seal & Bearing Type
3E
B = Carbon on Ni-resist with standard bearing and Buna N elastomers
H = Carbon on Ni-resist with viton elastomers and hi-temperature bearing
I = Integral flange mounted with sleeve bearing and no mechanical seal
X
N = Carbon on carbide balanced mechanical seal with standard ball bearing
Examples:
XXX- xxxx X
l Rotation
Blank= Clockwise D = Counterclockwise
Rotor Size 87P, 87. 95, 118P, 118, 143J, 143, 162, 187, 200
Optional Features
C =Circular Flange Mount F =Foot Mount S =Steel Case T =Carbide Seal Seat• X =Special Material or Construction
C3EBC-187 C3EHFS-143
Model 3E with standard seal and bearing, flange mounted, cast iron casing with 187 rotor size. Model 3E with positive drive mechanical seal (standard faces). high temperature bearing, foot mounted. steel casing with 143 rotor size.
·consult IMO for optional mechanical seal materials.
CERTIFIED ISO 9001
�II
Quality Management System
ALLWEILER HO\JTTUIN IMO PUMP
© :000 /1110 P1t111p All ri�hr, re.1en-ed.
3E-96-B
WARREN
(imo ,_Pump
Imo Pump
1710 Airport Road
PO Box 5020
Monroe, NC
28111.5020
USA
tel+ 1 (704) 289 6511
fax+ 1 (704) 289 9273
Internet
http://www.imo-pump.com