3499 frico 04-11-30 07.16 sida 4 brochure 2004-52.pdf · 3499_frico 04-11-30 07.16 sida 6. s10/s15...
TRANSCRIPT
MODEL HEAT OUTPUT WIDTH INPUT VOLTAGE MAX AIR NOISE LEVEL WEIGHTkW mm Amps VOLUME m3/h dB(A) (high/low)** kg
S10-100A 0/ 1064 0.4 230V/1ph 1250 53/45 15
S10-100E 0/ /4.5/9 1064 13.5+ 400V/3ph 1250 53/45 19
S10-100W 0/ /8.4* 1064 0.4 230V/1ph 1150 52/47 18
S10-150A 0/ 1564 0.6 230V/1ph 1900 53/40 22
S10-150E 0/ /6.75/13.5 1564 20+ 400V/3ph 1900 53/40 24
S10-150W 0/ /13.2* 1564 0.6 230V/1ph 1700 48/40 24
*LP HW at 82/71˚c (Other outputs/coil specifications on request). **Conditions: Distance to unit 5m, directional factor 2, equivalent absorbtion area 200m2. + Per phase.All S10 models supplied without controls. For control options, overall and fixing dimensions see Page 8.
S10 S
ERIES
Com
mercial Range
S10 SERIES
The S10 range is Shearflow’s most popularmodular air curtain system. Suitable for offices,shops, reception areas and other commercialpremises, the S10 series combines streamlinedgood looks with high performance and low noise.Modules can be mounted singularly to coverdoorways up to 1.5m, or combined to provide acontinuous barrier over any width of opening andare suitable for doorways up to 2.7m high. TheS10 series is supplied without controls. Remoteswitching and a control link allow any number ofmodules to be centrally controlled.
High performance is provided by low noisetangential fans connected to powerful twin shaftmotors for long service life. Construction isdurable white powder coated steel galvanisedsteel chassis, moulded end caps and brushedaluminium inlet grille.
2
3499_frico 04-11-30 07.16 Sida 4
MODEL HEAT OUTPUT WIDTH INPUT VOLTAGE MAX AIR NOISE LEVEL WEIGHTkW mm Amps VOLUME m3/h dB(A) (high/low)** kg
S15-100A 0/ 1070 1.6 230V/1ph 2400 64/54 25
S15-100E 0/ /6/12 1070 19+ 400V/3ph 2400 64/54 30
S15-100W 0/ /18.6* 1070 1.4 230V/1ph 2200 62/54 30
S15-150A 0/ 1570 2.8 230V/1ph 3600 64/55 35
S15-150E 0/ /9/18 1570 29+ 400V/3ph 3600 64/55 40
S15-150W 0/ /27.8* 1570 2.6 230V/1ph 3300 64/58 40
S15 SERIES
S15 modular air curtains combine the samedesign characteristics as the S6 and S10range, with higher output for largercommercial applications. Typically S15units can be mounted up to 4.0m high, butstill provide high performance and relativelylow noise. S15 units are available in 1.0mand 1.5m modules and like all Shearflowmodular units can be linked together toform a continuous barrier. Remote switchingand a control link allow any number ofmodules to be centrally controlled.
S15 units also use tangential fans coupledto twin-shaft motors for reliability and longservice even in the most demandingenvironments. Construction is durable whitepowder coated steel galvanised steelchassis, moulded end caps and brushedaluminium inlet grille.
S1
5 S
ERIES
Com
mercial Range
*LP HW at 82/71˚c (Other outputs/coil specifications on request). **Conditions: Distance to unit 5m, directional factor 2, equivalent absorbtion area 200m2. + Per phase.All S15 models supplied without controls. For control options, overall and fixing dimensions see Page 8.
3
3499_frico 04-11-30 07.16 Sida 5
S20
SER
IES Industrial Range
MODEL HEAT OUTPUT WIDTH INPUT VOLTAGE MAX AIR NOISE LEVEL WEIGHTkW mm Amps VOLUME m3/h dB(A) (high/low)** kg
S20-100A 0/ 1070 1.9+ 400V/3ph 3800/3000 71/68 55
S20-100E 0/ /9/18 1070 28+ 400V/3ph 3800/3000 71/68 58
S20-100W 0/ /18* 1070 1.9+ 400V/3ph 3400/2700 70/67 60
S20-150A 0/ 1570 3.2+ 400V/3ph 5700/4500 72/69 72
S20-150E 0/ /13.5/27 1570 42+ 400V/3ph 5700/4500 72/69 74
S20-150W 0/ /27* 1570 3.2+ 400V/3ph 5100/4050 71/68 76
S20 SERIES
The S20 series are Shearflow’s most powerful aircurtains; designed for industrial doorways, loading bays,warehouse doors etc, up to 6.0m high. These units areparticularly suitable for doorways that are continuouslyopen to allow the movement of traffic or goods. As wellas providing energy efficiency, they enable comfortableworking conditions, improve safety, for example byremoving the need for physical partitioning and preventthe ingress of dust and vehicle fumes. These units canalso be used in summer for a welcome cooling effect.
Despite the powerful output, S20 units have relativelylow noise characteristics and use durable componentsfor long working life, including 3 phase industrial motorsand dampened motor mountings. Control is carried outremotely allowing a number of switching options.
Finish is white powder coated steel with a galvanisedsteel chassis and brushed aluminium inlet grilles.
*LP HW at 82/71˚c (Other outputs/coil specifications on request). **Conditions: Distance to unit 5m, directional factor 2, equivalent absorbtion area 200m2. + Per phase.All S20 models supplied without controls. For control options, overall and fixing dimensions see Page 8.
4
3499_frico 04-11-30 07.16 Sida 6
S10/S15 RECESSED SERIES
Both S10 and S15 ranges are available as recessedunits allowing safe and simple installation in falseceiling voids.
In their recessed form S - range air curtains can coveropenings up to 2.5m high (S10/R) or 3.7m high(S15/R), and 2m wide. Internally the air curtaincomponents are identical to the standard surfacemounted models and are supplied ready fitted in arobust steel mounting frame.
The frame can be suspended from a load bearingstructure using drop rods or other suitable fixings. TheShearflow recessed system is quick and convenient toinstall as well as being very versatile. The suppliedmounting frame ensures that the air curtaincomponents are mounted securely and that safeclearances are maintained around the unit.
Each recessed unit comes complete with a flush fittingceiling grille. No controls are supplied but any ofShearflow’s remote control options may be used.
S1
0/S
15
REC
ESSED
SER
IES
5
MODEL HEAT OUTPUT INPUT VOLTAGE WEIGHTkW Amps kg
S10-100AR 0/ 0.4 230V/1ph 21.3
S10-100ER 0/ /4.5/9 13.5+ 400V/3ph 28.3
S10-100WR 0/ /8.4* 0.4 230V/1ph 27.3
S10-150AR 0/ 0.6 230V/1ph 29.6
S10-150ER 0/ /6.75/13 20+ 400V/3ph 39.6
S10-150WR 0/ /13.2* 0.6 230V/1ph 37.1
S10-200AR 0/ 0.8 230V/1ph 39.1
S10-200ER 0/ /9/18 27+ 400V/3ph 53.1
S10-200WR 0/ /16.8* 0.8 230V/1ph 51.1
S15-100AR 0/ 1.9 230V/1ph 40.8
S15-100ER 0/ /6/12 19+ 400V/3ph 44.8
S15-100WR 0/ /18.6* 1.7 230V/1ph 43.8
S15-150AR 0/ 2.8 230V/1ph 53.2
S15-150ER 0/ /9/18 27+ 400V/3ph 58.2
S15-150WR 0/ /27.8* 2.8 230V/1ph 57.2
S15-200AR 0/ 3.8 230V/1ph 78.9
S15-200ER 0/ /12/24 38+ 400V/3ph 86.9
S15-200WR 0/ /37.2* 3.4 230V/1ph 84.9
*LP HW at 82/71˚c (Other outputs/coil specifications on request). For airflow,volume and noise data, please refer to S10/S15 specification charts. (NB Actualnoise levels will be influenced by the ceiling void and mounting method).
3499_frico 04-11-30 07.16 Sida 7
COLD STORAGE
Cold Stores, food preparation areas and chill rooms canbe protected against the ingress of warm air by theinstallation of a Shearflow ambient (unheated) aircurtain. The ambient air curtain provides an invisible airbarrier and if a well designed, correctly sized unit isinstalled it is possible to prevent mixing of internal(chilled) and external (warm) air. Extensive research iscarried out at Shearflow’s research and developmentfacilities to ensure that the airflow speed and pattern isexactly as needed for such critical applications.
Use of air curtains to protect cold stores also avoids theneed for protective screens and barriers in front of open
doorways, which reduce visibility, for example wherepowered handling equipment is in use.
All Shearflow S-Series modular air curtains can be suppliedas ambient units for cold stores. The modular constructionallows any width of doorway to be covered and doorheights of up to 6m to be screened. Vertical mounting,using optional mounting brackets, allows further flexibility.
When ordered as cold store variants, S range air curtainscan be supplied with additional brackets, to clear projectingcold store doors, and door switch activation.
Ambient air curtains may also be used as dustand insect barriers.For individual model specifications please see respective pages.
6
SP
ECIA
L AP
PLIC
ATIO
NS
This thermal image shows how acorrectly positioned Shearflow aircurtain can completely seperatewarm and cold air zones.
Vertically mounted modular units in chill store.
3499_frico 04-11-30 07.16 Sida 8
7
ARCHITECTURAL RANGE
The Shearflow architectural servicehas been introduced to meet theneeds of architects who require theenergy efficiency and comfortbenefits of air curtains but alsodemand units that are in keepingwith stylish interior design.
The graceful curved profile ofShearflow’s LP range of air curtainsmeet the demanding requirements
for prestigious locations, such asretailing, corporate head offices,hotels and theatres. Finished inmirror polished or brushed stainlesssteel these units combine stylishlooks with the same highperformance and low noise of allother Shearflow air curtains.Bespoke manufacture allows sometailoring of the units to meet therequirements of individual locations.In addition to stainless steel, painted
finishes can be accommodated,either to a RAL finish or to match acustomer’s sample. You are invitedto contact our technical departmentto discuss specific applications
Architectural air curtains may alsobe mounted vertically using a specialbracket set to provide stylish columnsby the entrance door. This option isespecially useful in buildings withextensive entrance glazing.
MODEL HEAT OUTPUT DIMENSIONS INPUT VOLTAGE MAX AIR NOISE LEVEL WEIGHTkW w/d/h mm** Amps VOLUME m3/h dB(A) (high) kg
LP-1000ESS 0/ /4.5/9 1200/270/350 13+ 400V/3ph 1290 55 35
LP-1000WSS 0/ /10* 1200/270/350 0.52 230V/1ph 1290 55 37
LP-1500ESS 0/ /6/12 1700/270/350 17+ 400V/3ph 2100 57 55
LP-1500WSS 0/ /15* 1700/270/350 0.52 230V/1ph 2000 57 60
LP-2000ESS 0/ /9/18 2300/270/350 26+ 400V/3ph 2590 60 75
LP-2000WSS 0/ /20* 2300/270/350 1.04 230V/1ph 2400 60 80
LP-2500ESS 0/ /10.5/21 2740/270/350 30+ 400V/3ph 3400 62 90
LP-2500WSS 0/ /20* 2740/270/350 1.04 230V/1ph 3290 62 97
LP-3000ESS 0/ /12/24 3400/270/350 34+ 400V/3ph 4200 64 110
LP-3000WSS 0/ /30* 3400/270/350 1.04 230V/1ph 4000 64 120
Maximum recommended mounting height - All models: 2.7m. Maximum air velocity - All models: 6m/sec. *LP HW at 82/71˚c (Other outputs/coil specifications on request).**For installation dimensions please contact us. + Per phase. All models supplied without controls. For control options please see page 8.
SP
ECIA
L AP
PLIC
ATIO
NS
Brushed finish - Boots, Cannon Street, London.
Mirror polished -Allders, Oxford Street, London.
Mirror polished - Debenhams, Reading. Vertical mounting installation.
3499_frico 04-11-30 07.16 Sida 9
8
CONTROLS
Shearflow modular air curtains (except S6 series)are supplied without controls, allowing a widevariety of remote switching options and convenientlocation of the user controls. Typically air curtainsare controlled manually using on/off and outputswitching. This method is suitable where thedoorway is continually open or in frequent use.Shearflow provide a number of control options:
Standard switch boxesEach SBO (water/ambient unit) or SB (electric unit) canbe used to control single or multiple units and may bemounted up to 20m from the air curtains. These robustcontrols allow on/off, high/low fan speed andhigh/low output (electric versions only).
Thermostatic control (RTE/TS2)Air curtains may be controlled thermostatically either toswitch the unit or the heating elements. Thermostatic
control is most suitable where the air curtain is alsobeing used to provide a heating service.
Valve controls (VR20/25)A range of valve actuation devices is available.Supply to water units should always be isolatedlocally (isolator valves not supplied with units).
Door activation (MDCT3)Air curtain activates when door is opened, usingmagnetic contacts. Adjustable fan overrun time.
BMS activation (SBMS)Standard configuration allows 24v signal for on/offand fault signal, Summer/Winter running switch.
Please contact Shearflow for further advice and fulldetails of these control options.
DIM
ENSIO
NA
L INFO
RM
ATIO
N
A B C D E F G HLength Depth Height Wall fix ctrs Wall fix ctrs Roof fix ctrs Roof fix ctrs Roof fix ctrs
S6-60 A/E/W 640 256 160 550 103 N/A - Use bracket set MB6S6-80 A/E/W 840 256 160 750 103 “
S10-100 A/E/W 1064 300 200 823 135 823 125 140S10-150 A/E/W 1564 300 200 1333 135 1333 125 140
S15-100 A/E/W 1070 417 280 880 218 776 290 87S15-150 A/E/W 1570 417 280 1380 218 1276 290 87
S20-100 A/E/W* 1070 534 355 884 283 885 220 273S20-150 A/E/W** 1570 534 355 1384 283 1385 220 273
All measurements in mm
View from front Rear panel wall fixing points
Plan view Ceiling/drop rod mounts (S10 - 4x M6 Threaded / S15 - 4x M8 Threaded / S20 - 4x M10 Threaded).
Key hole slots Cable entry Water connection (All W models) S20 Alternative water connection
Unit Dimensions
For full installation dimensions please refer to Shearflow installation & operating manuals – available on request!
SB
SBO
3499_frico 04-11-30 07.17 Sida 10
TECHNICAL INFORMATION
Linking kit (JK)A standard wiring loom to connect modules(one kit per connection required).
Ceiling mounting accessories
• Ceiling brackets (ADPF1) for use with drop rods
• Full suspension set (ADPK) includes ceilingbrackets and suspension arms
Vertical mountingS10/S15 models may be verticallymounted using special mounting brackets(ambient/water units only).
Special finishesPowder coating service in RAL colours,quotation available on request.
InstallationFull installation and wiring details availableon request from our technical department.
SafetyPlease refer to full installation and operatinginstructions before installing/using heaters.Shearflow products should only be installedby competent persons in accordance with localregulations and our installation instructions.
WarrantyAll Shearflow products carry a 1 yearwarranty against manufacturing defects.
Our policy is one of continuousimprovement the company thereforereserves the right to change specificationswithout notice.
All Shearflow products are CE marked andcomply with European standards for safetyand electro-magnetic compatibility.
Shearflow manufacturing facilities are ISO14001 and ISO 9001 registered.
9
TECH
NIC
AL IN
FOR
MA
TION
A B C D ELength Depth Height Fixing centres Fixing centres
S10-100 A/E/W R 1174 410 310 1125 300S10-150 A/E/W R 1674 410 310 1620 300S10-200 A/E/W R 2238 410 310 2189 300
S15-100 A/E/W R 1186 580 390 1125 450S15-150 A/E/W R 1686 580 390 1622 450S15-200 A/E/W R 2258 580 390 2197 450
All measurements in mm
Plan View
Front View Side View
A B CS6-60 32 33 143S6-80 32 33 143
S10-100 36 30 205S10-150 36 30 205
S15-100 50 45 262S15-150 50 45 262
S20-100 75 45 361S20-150 75 45 361All measurements in mm
Water Inlet Pipes
Recessed Units
IP ratingS10 A/W (IP24)S10 E and S15 A/E/W (IP21)
For further details, technical informationafter sales support, please contact ourcustomer service department.
A Company of the Frico Group.
3499_frico 04-11-30 07.17 Sida 11