$3 - nasa · spherical coordinates cavity radius shock radius in see. ... the impact of fast-moving...
TRANSCRIPT
NASA CR-54250 - - C A L Report AI-1821:A-3
COMMENTS ON THE SOLUTION OF THE SPALL-FRACTURE
PROBLEM IN THE APPROXIMATION OF LINEAR ELASTICITY
William J . Rae
prepared for
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
CONTRACT NO. NAS 3 - 2 5 3 6
CORNELL AERONAUTICAL LABORATORY, INC. of Cornel1 University
Buffalo, New York 14221 I
GPO PRICE $
OTS PRICE(S1 $
Hard CODY (HC) $3 & . .
Microfiche (MF)
i
IJHRU)
https://ntrs.nasa.gov/search.jsp?R=19650010247 2018-07-02T11:40:29+00:00Z
L
c ?
NOTICE
This repor t was p repa red as an account of Government sponsored work.
Neither the United States , nor the National Aeronaut ics and Space Admin-
is t ra t ion (NASA), nor any person acting on behalf of NASA:
A) Makes any war ran ty o r representat ion, e x p r e s s e d o r implied,
with respect to the accuracy , comple teness , o r usefulness of
the information contained in this repor t , o r that the use of any
information, appara tus , method, o r p r o c e s s d isc losed in this
repor t may not infringe privately owned r ights ; o r
Assumes any l iabil i t ies with respec t t o the u s e of, o r f o r
damages resulting f r o m the use of any information, appara tus ,
method o r process disclosed in this repor t .
B)
As used above, "person acting on behalf of NASA" includes any employee
o r cont rac tor of NASA, o r employee of such cont rac tor , to the extent that
such employee o r cont rac tor of NASA, o r employee of such cont rac tor
p repa res , disseminates , o r provides a c c e s s to, any information pursuant
to h i s employment o r cont rac t with NASA, o r his employment with such
contractor .
Requests fo r copies of this repor t should be r e f e r r e d to
National Aeronautics and Space Adminis t ra t ion Office of Scientific and Technical Information Attention: AFSS - A Washington, D. C. 20546
C A
I i >
NASA CR-54250 CAL Report AI-1821-A-3
TOPICAL REPORT
COMMENTS ON THE SOLUTION OF THE SPALL-FRACTURE PROBLEM IN THE APPROXIMATION OF LINEAR E+AS,TI,CITY
I i
William J . Rae
prepared f o r
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
. January 1965
CONTRACT NO. NAS 3-2536
Te c hni cal Mana geme nt
NASA - Lewis Research Center
Space Electr ic Power Office
Martin Gutstein
1'
CORNELL AERONAUTICAL LABORATORY, INC. of Cornel1 University
Buffalo, New York 14221
i
? c
F O R E WORD
T h i s d o c u m e n t d e s c r i b e s a p o r t i o n of the r e s e a r c h conduc ted i n a
s t u d y of t he app l i ca t ion of the b l a s t - w a v e t h e o r y of m e t e o r o i d i m p a c t to the
p r o b l e m of s p a c e r a d i a t o r des ign . O t h e r publ ica t ions g e n e r a t e d u n d e r th i s
NASA-sponsored p r o g r a m inc lude " N o n s i m i l a r So lu t ions f o r I m p a c t -
G e n e r a t e d Shock P r o p a g a t i o n i n S o l i d s , "GAL R e p o r t AI- 1821-A-2 , NASA
CR-54251 , J a n u a r y 1965, and "On t h e P o s s i b i l i t y of S i m u l a t i n g M e t e o r o i d
I m p a c t by t h e U s e of L a s e r s , "CAL R e p o r t AI-1821-A-1, NASA CR-54029 ,
A p r i l 1964.
i i i AI-1821-A-3
ABSTRACT
This report presents a study of the tensile s t r e s s e s produced when a
compress ive spherical wave is reflected f r o m a plane, s t r e s s - f r e e surface.
Two c l a s ses of exact solution of the problem, within the approximation of
l i nea r elasticity, a r e reviewed. In one c lass , the incident s t r e s s distribu-
tion is spherically symmetr ic , while in the other it is only axisymmetr ic ,
allowing a variation in one angular coordinate.
exis ts between the two c l a s ses in the laws relating the strength of incident
and reflected waves. The implications of this difference on the reflection
of impact-generated s t r e s s waves a r e discussed.
A significant difference
The exact solution f o r c a s e s where the incident wave exhibits spher -
ical symmet ry is examined in detail, and simple quadrature formulas f o r
obtaining the reflected s t r e s s profile fo r a given incident waveform a r e p r e -
sented. These resul ts a r e compared with the commonly used solution which
cons iders only the s t r e s s e s due to a source and its image.
under which this fu r the r approximation i s acceptable a r e discussed.
The conditions
The limitations of a l i nea r elastic model in predicting spa11 f rac ture
a r e pointed Out, and the a r e a s most in need of fur ther s tudya re indicated.
, /-
-
AI- 182 1 -A-3
TABLE O F CONTENTS
I
I i
111
IV
V
VI
Section
FOREWORD.
ABSTRACT
LIST O F SYMBOLS ~
INTRODUCTION
STATEMENT O F THE PROBLEM I
WAVES DUE TO A SPHERICAL CAVITY . WAVES DUE TO A POINT FORCE . SPHERICAL POINT -SOURCE SOLUTION . CONCLUDING REMARKS . REFERENCES .
P a g e
iii
iv
vi
1
4
10
21
32
47
49
0
V AI- 1 82 1 -A- 3
. LIST OF SYMBOLS
a in See. IV, the radius of applicatian of p re s su re p - s e e
Eq. (20); in Sec, function defined in Eq. (65)
constants defined in Eq. (Y l j
function defined in Eq. (65)
a,, 6, b
,$i, 9 in See. IV, functions defined in Eq. (34) ; inSec. V, functions
defined in Eq. (61)
function defined in Eq. (64) fi3(r)
C weak-wave speed in l inear shock-speed, particle -speed relation,
s ee Eq. (1)
Cl dilatational wave speed, 1.w' C, shea r wave speed, 4' /7' D
8, B' - E
F
function defined in Eq. (65)
functions defined in Eq. (76)
projecti le kinetic energy
displacement potential, Sees. I1 and V; magnitude of point force,
See. TV
functions defined in Eq. (47)
function defined in Eq. (105)
= c\/cz functions defined in Eqs. (49 - 51)
h t a rge t thickness
H(&l,) function defined in Eq. (16)
i !fi 1 angles defined in Eq. (58)
functions defined in Eq. (27) * N, 2
vi AI- 182 1 -A- 3
Qo,’/2
P,
R, I?’
S
s t
Lc, ‘J
c/T
pres su re ; also Laplace t ransform variable
magnitude of applied pressure - see Eqs. (20) and (21)
functions defined in Eq.. (23)
cylindrical coordinates
spherical coordinates
cavity radius
shock radius
in See. 111, distances defiped in the sketch accompanying Eq. (16);
in See. V, distances defined in Eq. (58)
distances defined in the sketch preceding Eq. (58) and in Eq. (87)
in Sec , 11, constant in the l inear shock-speed, par t ic le-speed
relation, s e e Eq. (1); elsewhere, s = ‘ / c z
t ime
shock speed, par t ic le speed, Eq. (1)
var iable defined in Eq. (64)
displacements in the r and 2 directions
displacement in the /? direction
functions defined in Eq. $101)
functions defined in Eq. (76)
= q t \/z + A J 3 variable defined in Eqs. (763 and (81)
in Sec. IV, functions defined in Eq. (28); in See. V, functions
defined in Eq. ( 7 6 )
Vi I AI - 1 82 1 -A- 3
~~ ~~
function defined in Eq. (79)
var iable defined by one of Eqs. (41 - 43)
angles defined in sketch accompanying Eq. (16)
L a m i constants
A Poisson 's ratio, i, = 2 O + p )
variable defined in Eq. (1 1)
ta rg et dens it y
normal s t r e s s
mean s t r e s s
shea r s t r e s s ; a l so used as a dummy variable; a lso as a time
variable in Sec. V, s e e Eqs. (69), (74), and (81)
displacement potentials, see Eq. (7)
denotes conditions, respectively, along the incident dilatational
wave, incident shea r wavey dilatational and shea r waves generated
by first reflection of incident dilatational wave
denotes rea l o r imaginary part
v i i i AI-1 821 -A-3
I. INTRODUCTION
The impact of fast-moving particles drives s t rong compression waves
into a solid body.
a r e reflected as tensile waves. Depending on the intensity and waveform of
the incident pulse, the tensile s t r e s s e s generated upon reflection m a y cause
a f r ac tu re nea r the f r e e surface, a process r e fe r r ed to as spallation.
Damage of this s o r t can be a source of grea t concern in cer ta in situations,
f o r example in the case of space radiator systems.
When such waves a r r i v e a t a s t r e s s - f r e e surface, they
2
A prec ise theoretical treatment of the spallation problem is made
difficult by the fact that different equations apply during successive s tages
of the deformation, In the ea r ly stages, f o r example, the compression con-
s i s t s of a strong shock wave, whose motion through the solid is descr ibed
by the equations of a compressible , inviscid fluid.
propagates into the target, and the mater ia l strength then begins to play a
role. During this stage, plastic deformation predominates f o r a while, and
ult imately the ent i re process becomes elastic.
The shock decays a s it
Many approximations have been proposed f o r treating this problem. .h
One of the s imples t of these'" is to use the inviscid, compressible-fluid
description up to the point where the incident wave first reaches the f r e e
sur face . F r o m that instant on, the motion is a s sumed to be descr ibed by
the c lass ica l equations of l inear elasticity, using the p r e s s u r e distribution
behind the shock to give the incident compressive s t r e s s distribution. The
ent i re problem is then reduced to the s imple question:
a r e developed along the axis of symmetry when a given compress ive s t r e s s
wave ref lects f r o m a plane, s t r e s s - f r ee boundary?
What tensile s t r e s s e s
.*a
-'* See, fo r example, Ref. 3, Appendix A.
1
~~~ ~
AI-1821 -A-3
?
The fact is that this question has never been thoroughly examined,
although the needed resul ts a r e contained in a number of papers , par t icu-
l a r ly f r o m the f ie ld of seismology. The principal objective of this repor t
is to extract these resul ts in a f o r m part icular ly suited to the spallation
problem, using them to evaluate fur ther approximations that can be used,
and to shed light on the effects of various parameters .
The approximation in which the spal l - f racture problem is to be
t rea ted in this report is formulated in Section 11.
there of the present s ta te of knowledge of the s t r e s s distributions that a r e
generated in hypervelocity impact.
to be a specified function, the question of its reflection f r o m a f r e e surface
is then posed in the l inear elastic approximation.
A brief review is given
W i t h the incident distribution considered
Solution of the specified elastic problem begins in Section I11 with a
review of a method of solution which uses a p re s su r i zed cavity a s the source
of the spherical disturbance, together with an image sys t em to p re se rve
the boundary conditions a t the f r e e surface.
various portions of the image system a r e presented in detail, in o r d e r to
a s s e s s their relative importance.
f i les which r i s e instantaneously to a maximum and then decay rapidly, the
maximum tensile s t r e s s a t the front of the reflected wave can be adequately
calculated by the approximation that considers only the source cavity and an
image cavity experiencing the same pressure , but with opposite sign.
The contributions a r i s ing f r o m
It is shown that, f o r incident s t r e s s pro-
In Section IV, a second c l a s s of solution is considered, in which the
incident wave is generated by the application of a point force to one f r e e s u r -
f ace of a slab.
angular variation not present in the spherically symmetr ic solution.
The wave that results is spherical in shape, but displays an
This
2 AI-1821 -A-3
angular variation gives r i s e to a n increase in the amplitude of the reflected
wave.
Section V returns to a consideration of the spherically symmetr ic
case , and the solution f o r a point source and i ts image sys t em is cas t in
the f o r m of a quadrature formula f r o m which the reflected s t r e s s profile
can be calculated, once the incident profile is known.
The report concludes with a discussion of the a r e a s where deficien-
c ies s t i l l exis t in the l inear-elast ic t reatment of the problem, and mention
is made of the most important a reas in which improvement over such a
model should be sought. Finally, the implications of these studies on the
interpretation of spal l - f racture experiments a r e pointed out.
3 AI-1 821 -A-3
11. STATEMENT O F THE PROBLEM
General Cons ide rations
When a projecti le s t r ikes a solid target at high speed, a shock wave
i s generated which becomes approximately spherical in shape a f te r a
period severa l t imes that required for the projecti le to t rave l its own length.
The shock decays in s t rength a s it propagates through the target and
ultimately degenerates to an elastic wave.
surface, it is reflected a s a tensile wave, whose amplitude may be sufficient
to cause a spa11 fracture .
t a rge t thickness is required to prevent such a f rac ture , when the projecti le
m a s s and velocity a r e specified.
4
If it encounters a s t r e s s - f r e e
The fundamental problem is to determine what
If the ta rge t is sufficiently thin, o r the impact speed sufficiently high,
the reflection will take place in a region where the target is incapable of
sustaining tensile s t r e s s , and a puncture results. At the other extreme,
where the target is sufficiently thick in relation to the sever i ty of the impact,
the reflection will follow the classical equations of elasticity.
mediate regime, the plastic and viscoelastic behavior of the target play a
role.
In the inter-
A rigorous theoretical treatment of such a complex problem, valid f o r
all regimes, is obviously quite difficult.
imate t reatment in which the plastic regime is ignored entirely; instead, the
ta rge t i s a s sumed to behave like a compressible, inviscid fluid up to the
instant when the shock reaches the f ree surface; thereaf ter , the c lass ica l
equations of l inear elasticity a r e assumed to apply, with the incident s t r e s s
distribution given in t e r m s of the pressure distribution behind the incident
shock. the purpose of this
r epor t is to examine i ts predictions m o r e fully.
This report p resents an approx-
3 This approximation has been proposed before;
4 AI- 1 82 1 -A- 3
t
It should be emphasized that the problem, when formulated this way,
is capable of solution without regard to the specific details of the incident
waveform. As is typical of l inear problems, it is possible to identify a n
indicial response; the solution f o r a specific excitation is then expressed
a s a convolution of the incident profile with this indicial response.
Incident-Wave Profile
A considerable amount of information is now available concerning the
ea r ly period of deformation, during which the target deforms as a com-
p res sible, inviscid fluid. Numerical solutions of the equations appropriate
to this regime were first reported by Bjork, 5 y who used the par t ic le- in-
cell method to obtain results in aluminum, iron, and tuff. More recently,
Walsh4’
to produce resul ts with great ly improved resolution fo r an expanded list of
made use of both a particle-in-cell and an Euler ian computer code
mater ia l s , including lead and polyethylene plastic. Para l le l developments
based on blast-wave theory have provided useful approximations. Many 8-1 1
of these analytical developments a r e summar ized in Ref. 1.
A typical representation of the p r e s s u r e distribution along the axis
of symmet ry is shown in Fig. 1. The coordinate sys tem used is a cylindri-
ca l one, with origin a t the impact point on the f ront face of the target.
5 AI-1821-A-3
The ta rge t thickness is denoted by h represents the (spherical) radius of the shock at any instant.
, while R, , a function of time,
The curves of Fig. 1, taken f rom Ref. 1, a r e based on the approxima-
tion that the flow can be represented as one half of a spherical ly symmetr ic
disturbance.
momentum is zero by symmetry.
the natural scale of distance in the problem,
cube root of the energy re lease divided by the character is t ic p re s su re in the
Such a flow is sensitive only to the total energy available; its
12 Thus, a s in a l l explosion problems,
, is proportional to the
medium. It was shown in Ref. 9 that this p re s su re is givenby /Fz ’ where Po is the target density under normal conditions, and C i s the
weak-wave velocity appearing in the l inear shock speed-part ic le speed rela-
tion
F o r most mater ia l s , the value of C is approximately equal to the bulk
dilatational wave velocity. Typical values of S l i e in the range f r o m 1
to 2.
13
It should be emphasized that the curves of Fig. 1 a r e intended only to
convey a general impression of the disturbance generated by impact.
quantitative significance is l imited by the approximations on which they a r e
based.
a r e not spherically symmetr ic ; f o r
would differ somewhat f r o m that shown in Fig. 1. Fur thermore , scaling
with respect to energy alone is not exactly cor rec t , a s Walsh and his
co -wo r k e r s have shown.
Their
F o r example, the s t r e s s distributions generated by an actual impact
e # 0 , the p r e s s u r e distribution
4, 7
6 AI- 1 82 1 -A- 3
The general nature of the pressure distribution reveals a discontinuous
jump a t the wave, followed by a relatively s teep decay.
have a l so been observed in the results of Allen and Goldsmith,
These features
14 who ca l -
culated the s t r e s s waves generated by applying, to the inter ior of a spherical
cavity in an infinite medium, a pressure that r i s e s instantaneously to a
maximum, and then decays exponentially.
Conversion to Incident S t r e s s Profile
In the present approximation, the mater ia l response is assumed to
become elastic a t the instant when the incident wave reaches the r e a r s u r -
face 2 = /q . With such an approximation, the basic differential equations
describing the motion become linear. Thus it is unnecessary to be specific
about the waveform of the incident pulse. It is sufficient to find the solu-
tion f o r a step-function; results for an a r b i t r a r y waveform may then be
found f r o m a Duhamel integral. Nonetheless, it is instructive to indicate
one method by which the incident waveform might be specified.
F o r example, the incident s t r e s s distribution can be calculated by
equating the p r e s s u r e f f rom the fluid-mechanical theory to the mean
s t r e s s . Allen and Goldsmith have pointed that the product CT
t imes the spherical radius e satisfies the plane-wave equation, i. e. ,
/ where and p a r e Lame constants, k the t ime, /=(e) the value of
the displacement potential a t R = 0 , and C, is the dilatational wave
speed
xc2y-i c,' = Po
(3)
7 AI-1821-A-3
.
Thus, specification of the pressure versus distance a t a given t ime t, is
equivalent to specifying Cr, at a t ime, f o r the s t ress -wave analysis ,
Once the function F
ponents; f o r example
is known, i t can be used to find the other s t r e s s com-
Knowledge of the function /= over a given range of a t one instant is
equivalent to knowing i t over a displaced range a t a l a t e r instant, since it
depends only on the character is t ic coordinate k- Rl,(-, :
D E D E
B *I? I *I?
Thus, known conditions along A 0 a r e sufficient to determine conditions
along DE . To find out about the range C D , it is necessary to know
what was happening a t e = 0 during the time interval AC . F o r incident waves which lack spherical symmetry, the above consid-
erat ions do not apply, and a m o r e elaborate description of conditions behind
the incident wave is necessary.
8 AI-1821-A-3
Simple Reflection Formulas
Much of our present understanding of the mechanism of spa11 f r a c t u r e
’ G A %
has come f r o m consideration of the plane-wave c a s e (see, fo r example,
1%
the t reatment by Rinehart and Pearson in Ref. 15). In that case , the exact
F R E E sur?Fqc& -
solution of the equations of elasticity reveals that the reflected wave is the
z I c / -
E I -- . . . y, /’ ”
inverted image of the incident wave:
I
I I I - A simple extension of this solution to the spherical c a s e is to a s sume that
the solution is still given by the sum of the incident wave and i ts inverted
image, allowing both contributions to decay with distance the way they would
solution of the problem. One of the objectives of the present report is to
determine how good the approximation is.
9 AI-1821-A-3
.
111. WAVES DUE TO A SPHERICAL CAVITY
. One means of studying the reflection of spherical s t r e s s waves is to
examine the disturbance produced by applying a p r e s s u r e to the in te r ior of
a spherical cavity in the medium. The waves that resul t have spherical
symmetry, and the i r reflection at a f r e e surface has been considered in
recent papers by Aliev” and by Kinslow. l 8 This section presents a review
of their work, noting the physical significance of the various contributions
to the solution.
Basic Relations
The cavity, of radius Kc , is located with its center a distance h f r o m the f r e e surface. Cylindrical coordinates and Z
radius are measured f r o m the center of the cavity
, and spherical
Displacements in the r , 3 and e directions a r e denoted by U ,
and /J , respectively. In t e r m s of these displacements, the normal
s t r e s s e s cj- and shea r s t r e s s e s Z a r e given by
10 AI-1821-A-3
T = q - c - ax 9J- +") + z p U cp ar d t Y
while the equations of motion take the f o r m
+ %- f- 2'G-Z ar a t r
These equations can be decoupled by use of the displacement potentials , , and @ , defined by
11 AI-1821 - A - 3
The equations that resul t a r e
where C; = r/p. . Source Solution
The solution f o r the case where the cavity experiences a p r e s s u r e
0 , t d 0
( 9 ) %)= R= e, ( - p q -t 2 0
has been given by Blake, l 9 and others. It can be wri t ten in the f o r m
where
= c , t - 14
and where Poisson’s ratio is denoted by -$
the displacements and s t r e s s e s have been presented by Blake, l 9 by Aliev 17
and by Allen and Goldsmith, l4 who present detailed resul ts for the c a s e
. Complete expressions f o r
12 AI-1821 -A-3
Image System
In o r d e r to find how this disturbance is reflected f r o m the f r e e s u r -
face, one is l ed to consider the effect of a second spherical cavity, a l so of
radius RC , and located a t 2= 2h . Aliev makes use of such an
image, allowing it to experience the s a m e p res su re as the cavity a t 2 = 0 .
The resul t is to produce ze ro shear s t r e s s at the f r e e surface, but a non-
z e r o normal s t r e s s CE . If, on the other hand, the image cavity exper-
iences the same p res su re a s the original one, but with opposite sign, the
s t r e s s TE
is developed. In e i ther case, the cavity a t 2 = z h is not enough; the
is made zero at the f ree surface, but a net s h e a r s t r e s s TfE
complete image sys tem must include a second contribution distributed along
the f r e e surface in such a way a s to cancel the nonzero s t r e s s due to the
two cavities. .b 1-
The s t r e s s components a r i s i n g f r o m the two cavities can be visual-
ized by considering a spherical displacement which decays with e , c o r -
responding to a compression
J.
''. P r o f e s s o r Norman Davids of the Pennsylvania State University has pointed out to the author in a private communication (April 23, 1964) that the s a m e conclusion can be reached simply by considering a source potential The author is ve ry grateful to Professor Davids f o r a v e r y informative discussion of this problem.
# = r-' f (r- c,t) , and an image potential c$ = -r- '$(r+G i) .
13 AI-1 821 -A-3
F o r the case where a compression is applied to both cavities (as Aliev
does), this sketch of versus can be used to construct the displace-
ments a t four points (all having different values of /e ) nea r the f r e e s u r -
face. The displacements have the appearance
&; \
fi \
7
F r o m this sketch i t can be seen that the displacement gradients a r e a s
follows
.r
I Note that, at the interface, the contributions to and to (2x& '
coming f r o m the two cavities are of opposite sign, while the contributions
to i""/..), and(a%t)r a r e of the same sign. Thus the net effect of two
compress ive cavities is to produce zero shea r s t r e s s
but a nonzero normal s t r e s s T2 . Tr2 a t the surface,
On the other hand, if a tensile s t r e s s is applied to the inter ior of the
image cavity, so that it generates displacements which increase with
14 AI-1821-A-3
the resultant displacements have the appearance
and the associated gradients a r e as follows
In this case, the contributions to L(, (hy'&) and a r e of oppo- t
s i te sign and cancel, while the contributions to
add. Thus there is no normal s t r e s s T2 a t the f r e e surface, but a net
s h e a r s t r e s s ,L is developed, whose sign is negative
2Uht and (av!r) 0 t
' ft
15 AI - 1 8 2 1 -A- 3
In addition to the image cavity, then, the complete solution requires the
application of a positive distribution of
Effect of the Surface Distribution
As mentioned ear l ie r , the approximation is often made that the surface-
Trt- on the f r e e surface.
distributed shea r s t r e s s e s can be neglected, and that only the compressive
source cavity and tensile image cavity need to be considered.
work, l 8 f o r example, is based on this approximation.
Kinslow's
To est imate the accu-
racy of the approximation, it is necessary to determine the s ize of the con-
tribution f r o m the surface s t r e s ses . An answer can be found by making a
slight modification of Aliev's results, since the solution f o r a compressive
sou rce and tensile image can be found mere ly by changing, in Aliev's work,
the sign of the displacements due to the image (for example, the sign of fz
in Aliev's Eqn. 2 .4 is reversed). F o r the case where the source cavity
experiences a step-function pressure
the result ing shea r s t r e s s produced a t the surface is given by
.
16 AI - 1 82 1 -A- 3
The angle 9 is defined a s &s - ' r , as shown below R
and 9, and b, a r e defined a s before, s o that
These results a r e shown in Fig. 2 for the case - h = 3 , 3 = - I . e 4 As noted above, the shear s t r e s s produced b; the two cavities is
negative; to cancel it, a positive s t r e s s of the same magnitude must be
added, resulting in s t r e s s e s within the target, in addition to those gener-
a ted by the cavities.
facts a r e important. The first is that Tr8 is of the o r d e r of
i. e . , i t is generally of the same order a s the s t r e s s e s produced by the
cavi t ies . On the other hand, i t is significant to note that the additional
applied s t r e s s is ze ro a t
make no contribution along the axis a t the f ront of the reflected wave.
In assess ing the magnitude of this contribution, two
P, ' ) 2 5 h
r = 0 ; thus, according to ray-theory, 2o it will
The
17 AI-1821-A-3
s a m e conclusion is derived below in Section V f o r the c a s e of a point-source
disturbance, namely, that fo r incident waves having spherical symmetry ,
the tensile s t r e s s developed at the front of the reflected dilatational wave,
along the axis of symmetry, i s exactly that given by the source and i ts
image. Behind the front, the simple solution is no longer cor rec t , but even
there the approximation will be shown (in Section V) to be acceptable pro-
vided the s t r e s s amplitude decays rapidly enough behind the incident wave.
Off -Axis Conditions
At points located off the axis of symmetry, but on the reflected dila-
tational wave front, the effect of the surface s t r e s s e s is compressive. Thus
the source-plus -image approximation will overest imate the tensile s t r e s s
at these points.
identifying the sur face s t r e s s e s that mus t be added, he approximates their
This conclusion can be discerned in Aliev’s results. After
effect by r ay theory, using fo r this purpose the resul ts of Bagdoev, a
s u m m a r y of which has recently appeared in translation. 21 Aliev’s resul t is
c that the jump is s t r e s s [r2] across the reflected dilatational wave is
given by
9” 1 7 1‘- where Pt and e, a r e defined in the sketch above, and f70 is the value
of the p r e s s u r e in the source cavity a t & = 0’ . Figure 3 shows the va r i a -
18 AI-1821-A-3
tion of with e, f o r 3) = 1 / 4 . The leading t e r m (unity) in the l a s t
bracket of Eq. (15) represents the tensile jump, due only to the source and
image. The next t e rm, involving /-/ , is of opposite sign, representing
a compressive effect.
Thus it appears that, f o r incident waves having spherical symmetry,
the source- image construction is exact a t the front of the reflected wave,
along the axis of symmetry, where the maximum tensile stress is likely to
be developed.
would add a compressive contribution, while at points on the axis of symme-
t r y behind the reflected dilatational wave , the considerations given in
Section V suggest that a more exact solution does not a l t e r the maximum
tensi le s t r e s s , at l ea s t f o r incident wave fo rms which decay rapidly.
Kinslow's Work
F o r points off the axis of symmetry, a m o r e exact solution
The above conclusions a r e of importance in interpreting the work of
18 Kinslow, who makes use of the source-image approximation, applying it
to incident waves which a r e finite sums of the Blake-type19 solution. The
p r e s s u r e in the source cavity i s taken to be
Actually, because of the conditions applied to find the coefficients
de rivative s of
a re s e t equal to zero a t
can be summed a s
f ; (all
,
t = 0 ) , Eq. (17) becomes a binomial s e r i e s , which
f9 , beginning with the f irst and ending with the ( M - l ) d
1 9 AI-1821-A-3
Kinslow presents resul ts f o r selected values of d and Y) , evaluating , f r o m the formula
P
where c is the target s t ress-wave speed, , the radius of the c r a t e r
that would be produced in an infinite target ,
face, and 'J the par t ic le velocity behind the incident shock when it
reaches the f r e e surface.
r the depth of the f r e e s u r -
20 AI - 1 82 1 -A - 3
IV. WAVES DUE TO A POINT FORCE
A second means of representing incident s t r e s s waves like those
encountered in hypervelocity impact is to consider the application of a force
to one side of a s lab of finite thickness.
which propagates into a s lab due to the application of a distributed force
The solution f o r the disturbance
23 The and by Thiruvenkatachar. 22 has been presented by Huth and Cole,
solution describing the reflection of these waves by a second f r e e surface
has been given by Thiruvenkatachar. The waves induced by application
of a point force, and the i r subsequent reflection, a r e discussed by Broberg,
and by Davids.
24
25
26
A point force generates a wave whose shape is spherical , but the
Fur thermore , s t r e s s distribution behind it is not spherically symmetr ic .
an incident shea r wave is generated; no such fea ture appears in the solu-
tions of the previous section.
The most distinctive feature of the solutions discussed below is that
the laws relating the s t rengths of incident and reflected waves differ consid-
e rab ly f r o m those that apply fo r spherically symmetr ic waves.
purpose of this section is to discuss this feature.
The main
Distributed, Step-Function Load
It is instructive to s t a r t f rom the solution fo r a step-function p r e s s u r e
applied over a c i rc le of radius a
21 b
AI-1821-A-3
i P
I 2a
/ Z = O , 2 - = h
Te = 0 2=c)
The c a s e t rea ted by Thiruvenkatachar 239 24 makes use of a delta function
instead of the unit s tep
point force F applied a t = 0 . Thus i t should be possible to recover
the l a t t e r resul ts by taking the limit o , P-c , in such a way
that
J- (6) . The problem solved byDavids is that of a
Both of these authors employ the Laplace t ransform to der ive formal ex-
press ions fo r the t ransforms of the various s t r e s s components. These ex-
press ions a r e then expanded in se r i e s whose successive t e r m s represent
the incident, reflected, and multiply reflected waves. F o r example, it is
possible to sketch the progress of the various waves along the axis = 0
in a f diagram >
22 AI - 1 82 1 -A - 3
I
0 h In the analysis that follows, only the incident dilatational (P) wave, and
the reflected dilatational (Pf) and s h e a r (p5) waves a r e accounted for.
Thus the resul ts given below give no information about the s ta te of affairs
that exists a f te r passage of the incident shea r ( 5 ) wave. .I. -,-
The Laplace t ransform of the solution f o r an applied p r e s s u r e
can be found by replacing p , wherever it occurs in Thiruvenkatachar 's
analysis , by p/*
p l ( e )
, where 8 denotes the t ransform variable
00
Rj9 = 1 m e - P t & (22)
T2 , in
0
With this replacement, the t ransform of the s t r e s s component
the region affected only by the incident dilatational wave, and the reflected
dilatational and shea r waves (i. e . , the tr iangle, in the sketch above,
bounded by the l ines f l = h , t =&/& ) is 24 t= 0 ,
% - - - c [ ~ o + ~ , p + Q z -* i J.
"* Very l i t t le is known at present about the charac te r i s t ics of waves of this type that a r e generated in hypervelocity impact. do not admit such waves, and they have apparently not been observed a s yet i n solutions which include mater ia l strength. 27
Hydrodynamic analyses '> 4 y
23 AI-1821-A-3
where
In these expressions, To and denote Bessel functions of the f i r s t
kind. The functions h/l , dL , a( , and 1 are given by
p =/E'+ tx; In general , the inversion of these t ransforms i s ra ther complicated, but can
be effected by use of Cagniard's method. 28 The process is relatively
s imple r when applied to conditions along the axis of symmetry, par t icular ly
a t the wavefronts. The remainder of this section is devoted to the extraction
of these results.
Inversion of the Transforms
Thiruvenkatachar begins the inversion of these integrals by making
the change of variable
24 AI - 1 82 1 -A- 3
which leads to
where
The next s tep is to use an integral representation for the Bessel-function
p roduc t
25 AI- 1821 -A-3
where , %- , and a r e defined by
7 - If the re- Note that >c depends on a , v , , and $ , but not on
maining Besse l function is a l so replaced, by the integral representation
and if the o r d e r of integration is changed, the result is
26 AI- 182 1 -A-3
Cagniard 's technique is now applied to these, by making the changes of
variable, in (38), (39), and (40), respectively
cLt = h (gJ;;;;"+dw)-E/- + L f y j P ? a s f (43)
var ies f r o m ze ro to infinity, f- t r aces out a path in the complex As 7 plane:
The path of integration can be deformed, 28 so that it l i es along the real
axis in the t - p l a n e , and the result is
AI-1821-A-3
c,
where
, - 7
and where the (complex) var iable
the ( r ea l ) var iable
(46) can now be inverted by inspection.
tributions of the three waves to the s t r e s s along the axis of symmet ry a r e
found to be
is defined a s an implicit function of
by Eqs. (41) - (43), respectively. Equations (44) -
If r is s e t equal to zero, the con-
where
28 AI-1821-A-3
and where e is to be replaced by Q in Eqs. (41) - (43). If the limit
Q-0 , p-ar, is now taken, with abz vr , then no longer
depends on 9 ; the integrals in (49) - (51) can be worked out, and the result
is
In these last three equations, -r('
by Eqs. (41) - (43), with e = 0 .
is defined a s an implicit function of ?k
29 AI- 182 1 -A-3
S t r e s s Discontinuities at the Wavefronts
Along each wavefront, is zero. The values of the s t r e s s e s
at the wavefront can be determined rel- QP , Q)PP ’ GhS
atively easily, and a r e found to be
In c ross ing any given wave, the contributions f r o m the other two waves a r e
continuous; thus Eqs. (55) - (57) also give the s t r e s s discontinuities that
occur a c r o s s the various waves.
All of the foregoing formulas ag ree with Davids’ resul ts . 26 Equations
(55) - (57), for example, can be used to recover the stress discontinuities
shown in Fig. 8 of Ref. 2 6 , and can a l so be derived f r o m the general
formulas given there.
(55) - (57) add up to ze ro a t the f r e e surface
Other checks can a l so be made; fo r example, Eqs.
t = h . The most striking feature of the expressions f o r the stress discontin-
uit ies l i es in the fac t that they differ considerably f r o m those describing
spherical ly symmetr ic waves. In particular, the s imple source-plus- image
approximation would s a y that the formula f o r the jump in s t r e s s a c r o s s the
reflected dilatational wave ought to be derivable f r o m the incident s t r e s s
30 AI 1 82 1 -A- 3
formula [Eq. (55)) by changing the sign, and replacing 2 by zh-2 . But such is not the case.
f lec ted a s a tensile wave of amplitude ( 1 + 2 4 + 3 ) 4 , + 8 % 3 ) , a number
which is typically on the o r d e r of two.
A compression wave of unit amplitude is r e -
The reflected s h e a r wave then im-
pa r t s the amount of compression needed to preserve the ze ro s t r e s s condi-
tion at the f r e e surface. Moreover, the contribution f r o m the reflected
shea r wave is nonzero even at as h , in fur ther cont ras t to the spher i -
cal ly symmetr ic c a s e
It is c l ea r that such an amplification of the tensile s t r e s s e s generated
To upon reflection has an important bearing on the spa11 f r ac tu re problem.
fully a s s e s s its importance, however, two factors must be examined.
first is to determine how the amplification factor f o r reflected waves de-
pends on the degree of departure f rom spherical symmetry.
t he re i s no information available at present that might be used to infer this
dependence.
the incident s t r e s s distributions encountered in hypervelocity impact depart
f r o m spherical symmetry. At present, the only pertinent information avai l -
able consis ts of the p r e s s u r e distributions found in the numerical solutions.
The
Unfortunately,
The second i tem requiring attention is to determine how far
31 AI-1821-A-3
V. SPHERICAL POINT-SOURCE SOLUTION
The discussion of the two previous sections indicates that a definitive
solution fo r reflected s t r e s s profiles cannot be given until the effect of
off-axis variations in the incident s t r e s s e s have been examined m o r e fully.
In spite of this reservation, it is nevertheless instructive to pursue the
solution of the spherically symmetr ic c a s e further. This section presents
such a study, using f o r the excitation a point source instead of a cavity of
finite radius. The purpose of this section is twofold: f i r s t , to show explicitly
how the classical resul ts of Cagniard, 28 long known in the field of s e i s -
mology, can be applied to the present problem; and second, to a r r i v e a t
some ve ry general conclusions about the shape of the reflected s t r e s s pro-
fi le and the influence of the incident profile by writing the solution in t e r m s
of a Duhamel integral.
Basic Relations
The coordinate sys tem is the s a m e a s that used ea r l i e r , except that .?I *F
some new notation is introduced
FREE S U g F A C r
.b -,* The 2 -coordinate used he re would be h - 3 in Cagniard'sZ8 notation.
used h e r e differ by Thus, the -f -displacements and the derivatives a s ign f rom those of Cagniard. The s t r e s s TE , which involves only W / B t , can be taken directly from Cagniard's results by s imply replacing 2 by h - 2 -
32 AI - 1 82 1 -A - 3
/ e and denote distance f r o m the source and image, respectively,
while e, and cL descr ibe the minimum-time path f o r a wave that t ravels
f r o m the source to the f r e e sur face a t the dilatational-wave speed, and
thence to the field point 2 a t the shear-wave speed. The angles I; and I, and the distances 6 and pt a r e determined f r o m the rela-
tions (for given r and 2 )
h = COS r, h - 2 = R, C O S T ,
.*. ' 8 .
In t e r m s of the displacement potentials defined in Eq. (7),
ponent F2 along the axis of symmetry f = 0 is
the s t r e s s com-
Method of Solution
CagniardZ8 wri tes the general solution in t e r m s of two influence func-
tions A and B :
t # = 1 F/ ( t -e ) A ( r j 5 % ) de
0
.b
"* CagniardZ8 uses y!' and fo r what a r e called 4 and $J , respec- tively, in this report.
3 3 AI-1821-A-3
where /= (tb)
present purposes to be given in te rms of the incident s t r e s s distribution by
, the displacement potential at the source, is considered f o r
Eq. (2).
The values of tf and change discontinuously a t various instants,
signalling the a r r i v a l of various waves.
f o r in Eq. (59) under the integral signs in Eqs. (60) and (61), there will be
contributions f r o m the r - and Z -dependence of the integration limits.
F o r the moment, these contributions will be ignored; they will be added
la ter .
Thus in taking the derivatives cal led
Carrying the derivatives under the integral sign gives
rl.
By use of the Laplace t ransform, Cagniard shows that“’
where the t ransform of A3 is
and where
a ’ J -
.tr
“’ The notation S = I/=, , s = ‘/c, , introduced by Flinn and Dix, is used here .
34 AI-1821-A-3
The three terms in Eq. (63) correspond to a source, an image of opposite
sign, and a third t e r m caused by the sur face s h e a r s t r e s s e s .
The t ransform of B(’d) is .
Inversion of the Transforms for r = 0
Most of the emphasis in Cagniard’s t reatment is on the c a s e where
> > i , the case of grea tes t interest to seismologis ts , and the inver -
sion of the t r ans fo rms is a f a i r ly complicated problem.
e r e d he re , f = 0 , i s the opposite extreme, and Cagniard’s procedure
f o r inverting the Laplace t ransforms can be applied ve ry simply.
tiating Eq. (64) twice with respect to r gives
The c a s e consid-
Differen-
and with the new variable
Eq. (68) becomes
35 AI- 1 82 1 -A- 3
All functions in the integrand on the right a r e considered to be functions of
2 ; f o r example, = DLL((r)j . The inversion can now be accom-
plished by inspection, giving
The reason f o r 'evaluating this f i r s t integral , ra ther than the function itself,
is to facil i tate a l a t e r integration by parts.
s teps can be used to show that
Exactly the s a m e s e r i e s of
where, as in (71), L( (7) is defined by Eq. (69).
Differentiating Eq. (66) with respect to and 2 , and setting
r = 0 gives
36 AI-1821-A-3
In this case, the appropriate change of variable is
which a f te r inversion leads to
It is useful to put these resul ts in dimensionless form, by introducing the
notation
When the differentiations with respect to ? indicated in Eqs. (71), (72),
and (75) a r e c a r r i e d out, and the results expressed according to the notation
in Eq. (76), the resul ts a re :
c
37 AI- 1 82 1 -A- 3
In Eq. (77), the parameter r is defined as
and the quantities x , , o( , / , and b' are a l l functions of
, given by Eq. (69), which becomes
x = fC In Eq. (78), the functions
tions of as before (defined in Eq. ( 7 6 ) ) , but the dependence of x on
and 2 is different. It is given by Eq. (74), which becomes:
o( , p , B , and B' a r e the same func-
The inversion of this leads to a quadratic in K" , the co r rec t solution of
which uses the minus sign:
38 AI-1821-A-3
I -
where
The functions (v, 4 d L ) (2- Z h ' = , and 1/3 a r e shown in Figs. 4 and
5 fo r +$ = 1 / 4 . and 1/, a r e zero for 341 , while V3 is ze ro
f o r & C T < .+% (, -?h) . It should be noted that the s u m I/: qvz + I/ h 3 vanishes at the f r e e surface s / h = 1 .
T e r m s Arising f r o m the Limits
When taking derivatives under the integral sign in finding the expres-
sion f o r Gz , t e r m s ar is ing from the r- and ?-dependence of the
integration l imits were omitted. These t e r m s must now be added. During
the t ime interval between the a r r iva l of the incident dilatational wave and
that of the reflected dilatational wave, the potentials a r e simply
I ct=, S = O
and the corresponding s t r e s s along the axis is that given e a r l i e r in Eq. (4)
3 9 AI- 182 1 -A- 3
where the argument 2-s~ is denoted by (-) . After a r r i v a l of the
reflected dilatational wave, but before the reflected shea r wave, the poten-
tials a r e = 0 , and
In arr iving a t the first two t e r m s of this expression,
be ze ro (as is F’(o)
evaluating the discontinuities in the solution. Differentiating Eq. (86)
FCo) is taken to
below) in accordance with Cagniard’s procedure f o r
twice with respect to f leads to a v e r y lengthy expression involving,
where
When f-o ,
Many of the t e r m s in the lengthy expression f o r
C = 0 , leaving:
~x~/ ’rL vanish when
40 AI - 1 8 2 1 -A - 3
where the argument & - s (zh- %) is denoted by ( t ) . The derivative
can be worked out in s imi l a r fashion, using the fact that, B 2 4 / 4 f- 0
a s Y - 0 Y
The resul t is
When the reflected shea r wave passes , the t e r m s derived f r o m 6 do not
@ change, but a new contribution comes f r o m
t
sn, + SPL
=[ F ’ ( t - r ) R ( T ; c t ) d ’ i y (92)
When the mixed derivative of this quantity with respect to r and 2 is
formed, and evaluated f o r r = 0 , it becomes necessary to know cer ta in
derivatives of and pL . These a r e most easi ly worked out by using
the approximate f o r m of Eqs. (58) valid for F-0
h J,
.’ J J
= h t oha) (93)
41 AI-1821-A-3
F r o m Eq. (93) it follows that a"r , a</at , %-.Ar ,
az'x/a,,.aE a r e all ze ro a t V = 0 , while anL The resul t is
If all the extra t e r m s a r e now coilected, and the convention used that F
and all its derivatives a r e zero for negative argument, the complete ex-
press ion f o r the s t r e s s becomes
F u r t h e r simplifications of this expression a r e now possible.
l ines correspond to the solution that would be given by the source and i ts
image.
cat ion of Cagniard 's method, it can be shown that
The first two
Some of the remaining te rms a r e zero ; by a straightforward appli-
42 AI - 1 82 1 - A - 3
Thus A3 (3 ( ~ h - 2 ) ; 0, 2) = 0 . By differentiating (96), it is found that
- 16 - - j3s (zh-2)”
and it can a l so be shown, either by differentiating (96) o r by inverting
aA3/23 , that
Finally, inverting ashr reveals that
Thus Eq. (95) is reduced to
(97)
The l a s t two t e r m s can now be absorbed through an integration by parts.
Le t
4 3 AI-1821-A-3
Then
Since
I 6 - - - 4 lx =o - c, h” 9 3 ( I + (h-t)/$q y
The final expression fo r f12 can be wri t ten in the f o r m
44 AI-1821-A-3
, -
The integral appearing he re collects a l l of the correct ions to the source-
image solution that a r i s e f r o m the surface-distributed s h e a r s t r e s s . It
introduces no discontinuities, even a t the reflected shea r wave, and has
the effect only of altering the profile.
Final Formula
It is useful to employ the dimensionless variables
In t e r m s of these, Eq. (104) becomes
The function a/' appearing in this integrand is to be found f r o m the inci-
dent s t r e s s profile, f o r example by the method descr ibed in Section 11.
The variation of the influence function appearing in the integrand of
Eq. (106) is shown in Fig. 6 f o r the case z/h = 0. 8 , c, t/ h = 1. 5 ,
9 = 1 / 4 . F o r points a s yet unaffected by the reflected s h e a r wave, the
effect of the integral i s to contribute an additional tensile component.
passage of the shea r wave, a compressive contribution is felt.
the integral correct ion t e r m will not be very grea t in cases where
falls sharply f r o m its maximum, since the integrand rapidly becomes smal l
under such circumstances.
General Conclusion
After
Actually,
2 "
It must be emphasized that Eq. (106) is res t r ic ted to cases with spher -
ically symmetr ic incident waves; f o r such cases , the integral in Eq. (106)
45 AI-1 821 -A-3
represents , in a general but concise way, the correct ion to the source-
image sys tem due to the surface-distributed shea r s t r e s s e s . Generally
speaking, the correct ion t e r m will have the effect of modifying the
ref lected-stress profile slightly, but will leave the maximum tensile s t r e s s
unchanged, especially fo r profiles which decay rapidly.
46 AI-1821-A-3
VI. CONCLUDING REMARKS
It is well to re i te ra te in conclusion the approximation that fo rms the
bas i s of this entire study, namely, the use of a l inear e las t ic model. In
applying the results above to the interpretation of spal l - f racture experi-
ments, se r ious reservations must be held concerning the effects of non-
e las t ic response.
no attempt has been made to invoke a f rac ture cri terion. Even if the l inear
e las t ic model is accepted, one must still decide whether o r not the f rac ture
s t r e s s is time-dependent. It is unfortunately the case that the resul ts of
spallation experiments a r e the product of an unknown mixture of wave-
propagation effects and fracture-cr i ter ion effects.
l i t t le hope of drawing firm conclusions about the relative importance of
these two sources of uncertainty, except f r o m experiments done in internally
instrumented targets.
These may affect the wave propagation itself. In addition,
There would appear to be
On the other hand, it is important, in constructing a rational theory
f o r this problem, to be s u r e that all the implications of even the most
primitive approximation a r e fully understood.
s e a r c h has been to reveal the significance of the simple source- image
model.
exact l inear-elast ic results for cases where the incident wave is spherically
symmetr ic . F o r such cases , and for incident s t r e s s distributions which
dec rease rapidly behind the incident wave, the maximum tensile s t r e s s (on
the axis of symmetry, a t the wave front) can safely be calculated by the
source- image model.
One contribution of this r e -
Results derived f r o m such a model depart only slightly f r o m the
A m o r e important result has been to call attention to the fact that the
reflection laws inherent in the source-image model may be drast ical ly
4 7 AI- 1 82 1 -A- 3
changed f o r cases where the incident s t r e s s distribution is not spherically
symmetr ic .
f lected with more than unit amplitude f r o m a f r e e surface.
not enough is known about this solution a t p resent to indicate the connec-
tion between the degree of amplification and the extent of departure f r o m
spheric a1 symmetry.
In such cases , compression waves of unit amplitude a r e r e -
Unfortunately,
One of the i tems necessary in elucidating these questions is a physical
explanation of why an amplification occurs a t all.
a study be made of incident s t r e s s distributions whose angular variations
a r e intermediate between those of the spherically symmetr ic case and those
generated by a point force.
p resent in existing hydrodynamic and viscoplastic solutions should be exam-
ine d.
It is a l so important that
Finally, the extent of angular variations
Until a thorough investigation of these points is made, it mus t be
recognized that there is no firm theoretical basis fo r many of the conven-
tional rules of thumb often used in dealing with spal l f r ac tu re - - fo r example
the unit reflection coefficient, and the relation between the spall thickness
and the wavelength of the incident disturbance.
48 AI - 1 82 1 -A- 3
REFERENCES
1. Rae, W. J. , Nonsimilar Solutions fo r Impact-Generated Shock
Propagation in Solids. CAL Report AI-1821-A-2, NASA CR 54251
(Jan. 1965).
2. Loeff ler , I. J . , Lieblein, S . , and Clough, N., Meteoroid Pro tec t ion
f o r Space Radiators.
Flight, Ed. by M. A. Zipkin and R. N. Edwards. Volume 11 of
P r o g r e s s in Astronautics and Aeronautics, Academic P r e s s , New York,
1963.
Pages 551-579 of Power Systems f o r Space
3. Anderson, D. C . , F i s h e r , R. D . , McDowell, E. L . , and Weidermann,
A. H. , Close-In Effects f r o m Nuclear Explosions. AFSWC TDR-63-
53 (May 1963) AD 411 132.
4. Walsh, J. M., Johnson, W. E . , Dienes, J. K . , Tillotson, J . H . , and
Yates, D. R . , Summary Report on the Theory of Hypervelocity Impact.
Genera l Atomic Division, General Dynamics Corp. , Report GA-5119
(March 31, 1964).
5. Bjork, R. L . , Effects of a Meteoroid Impact on Steel and Aluminum in
Space.
Vol. 11, Spr inger Verlag, pp. 505-514 (1960).
Tenth International Astronautical Congress Proceedings,
6. Bjork, R. L . , Analysis of the Format ion of Meteor C r a t e r , Arizona:
A Pre l imina ry Report. J. Geophys. R e s . , Vol. 66, pp. 3379-3387
(1 96 1).
7. Walsh, J. M. , and Tillotson, J. H . , Hydrodynamics of Hypervelocity
Impact. General Atomic Division, General Dynamics Corp. , Report
GA-3827 (Jan. 22, 1963) AD 401 023. Also published in the P roceed-
ings of the Sixth Symposium on Hypervelocity Impact, Vol. 2 , Pt. I,
pp. 59-104 (Aug. 1963).
49 AI- 1 82 1 -A- 3
8.
9.
10.
11.
12.
13.
14.
15.
16.
Rae, W. J . , and Kirchner , H. P . , Final Report on a Study of Meteoroid
Impact Phenomena. GAL Report RM-1655-M-4 (Feb. 1963)
N6 3 - 16887.
Rae, W. J . , and Kirchner , H. P . , A Blast-Wave Theory of C r a t e r
Format ion in Semi-Infinite Targets.
s ium on Hypervelocity Impact, Vol. 2, Pt . 1, pp. 163-229 (Aug. 1963).
Davids, N . , and Huang, Y. K . , Shock Waves in Solid C r a t e r s .
J. Aero/Space Sc i . , Vol. 29, pp. 550-557 (1962).
Calvit, H. H. , and Davids, N o , Spherical Shock Waves in Solids.
Pennsylvania State University, Dept. of Engineering Mechanics, Tech-
nical Report No. 2 (July 9, 1963) AD 415617.
Cole, R. H. , Underwater Explosions.. Pr inceton University P r e s s
(1 948).
Rice, M.H. , McQueen, R. G. , and Walsh, J . M . , Compression of
Solids by Strong Shock Waves. Solid State Physics , Advances in
Research and Applications, Ed. by F. Seitz and D. Turnbull, Vol. 6,
Academic P r e s s , 1958.
Allen, W. A., and Goldsmith, W . , Elast ic Description of a High-
Amplitude Spherical Pulse in Steel. J. Appl. Phys., Vol. 26, No. 1,
pp. 69-74 (Jan. 1955).
Rinehart, J. S. , and Pearson, J. , Behavior of Metals under Impulsive
Loads.
Proceedings of the Sixth Sympo-
American Society f o r Metals (1 954).
Marcus, H . , Comments on a paper by K. Broberg, p. 246, International
Symposium on S t r e s s Wave Propagation in Mater ia ls , Ed. by N. Davids,
Interscience, New York, 1960.
50 AI- 1 82 1 -A- 3
17.
18.
19.
20.
21.
22.
23.
24.
Aliev, Kh. M., Reflection of Spherical Elast ic Waves a t the Boundary
of a Half -Space.
Fiziki, No. 6, pp. 88-92 (Nov. -Dec. 1961) (In Russian).
Kinslow, R. , Proper t ies of Spherical Shock Waves Produced by Hyper-
velocity Impact. Proceedings of the Sixth Symposium on Hypervelocity
Impact, Vol. 2, Pt. 1, pp. 273-320 (Aug. 1963).
Blake, F. G., Spherical Wave Propagation in Solid Media. J. Acoust.
SOC. A m . , Vol. 24, No. 2, pp. 211-215 (March 1952).
K a r a l , F. C . , and Keller, J. B. , Elastic Wave Propagation in
Homogeneous and Inhomogeneous Media. J. Acoust. SOC. Am. , Vol.
31, No, 6, pp. 694-705 (June 1959).
Bagdoev, A. G., Spatial Non-Stationary Motions of Solid Medium with
Shock Waves. Publishing House of the Academy of Sciences of the
Armenian SSR, Erevan, 1961. Translated a s U. S. Atomic Energy
Commission AEC TR-6400, Nov. 1962.
Huth, J. H. , and Cole, J. D. , Impulsive Loading on an Elast ic Half-
Space. J, Appl. Mech., Vol. 21, pp. 294-295 (Sept. 1954).
Thiruvenkatachar, V. R . , S t ress Waves Produced in a Semi-Infinite
Elast ic Solid by Impulse Applied over a Ci rcu lar Area of the Plane
Face.
Mechanics, Nov. 1 - 2, 1955. Published by the Indian Society of
Theoretical and Applied Mechanics, Indian Institute of Technology,
Kharagpur, India.
Thiruvenkatachar, V. R. , Recent Research in S t r e s s Waves in India.
Pages 1-14 of the Proceedings of an International Symposium on S t r e s s
Wave Propagation in Materials, Ed. by N. Davids, Interscience Pub. ,
New York, 1960.
Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi
Proceedings of the F i r s t Congress on Theoretical and Applied
51 AI-1821-A-3
25. Broberg, K. B . , A Problem on S t r e s s Waves in an Infinite Elast ic
Plate. Transactions of the Royal Institute of Technology Stockholm,
Sweden, No. 139 (1959).
26. Davids, N. , Transient Analysis of Stress-Wave Penetration in Plates .
J. Appl. Mech., Vol. 26, pp. 651-660 (Dec. 1959).
27. Riney, T. D. , Theoretical Hypervelocity Impact Calculations using
the Picwick Code. General Electric Co. Report R64SD13 (Feb. 1964).
28. Cagniard, L . , Reflection and Refraction of P rogres s ive Seismic Waves.
Translated and revised by E. A. Flinn and C. H. Dix, McGraw-Hill,
1962.
52 AI- 1821 -A-3
W
In
m
I- v) I
- m
- w n -
53 AI-1821 -A-3
1
0
-0. I N u” T I*-
!
-0.3
-0.5 0 I 2
7 ............._ L . .._ _.
....._________ C _ _ _ _ _ - - _
3 5 6 7
F i g u r e 2 SURFACE SHEAR STRESS PRODUCED BY SOURCE AND IMAGE C A V I T I E S
R,/h = 1/3, P=?/4
54 AI- 18 2 1 -A- 3
1.2
I .o
.8
. 2
0 0 20 40 60 80
@.DEGREES
Figure 3 THE FUNCTION H (e), FOR v = l/lc
55 AI- 1 8 2 1 -A- 3
100
0
- 4
-8
- 1 2
- 16
-20
- 24
- 20
-32
- 3f
-4c I .o I. 2 1.4 1.6 1.8 2.0 2. 2
56 AI- 18 21 -A- 3
2. rl
F i g u r e 4 THE FUNCTIONS a' y ; 21 = 1/4
20
18
16
14
12
5 IO
8
6
4
2
I I .o I. 2 I . 4 I .6 I .8 2.0 2 . 2 2.4
Z/h
F i g u r e 5 THE FUNCTION l/J ; u ’ = 114
57 AI- 1 8 2 1 -A- 3
I
0
- I
V
- 2
- 3
-4 1.0 1.6 I .8
58 AI- 1821 -A-3
Distribution List f o r
CAL Report AI-1821 -A-3 NASA CR-54250
Advanced Research Pro jec ts Agency The Pentagon Washington, D. C. 20301 Attn: John Huth (1)
Ae rojet -Gene ral Corporation 1100 W , Hollyvale Azusa, California Attn: Paul I. Wood ( 1 )
Aeronautical System Division (1) Wright-Pat terson AFB, Ohio
Aeronautical Systems Division Wright-Pat terson AFB, Ohio Attn: Col. L. R. Standifer (1)
Aerospace Corporation P. 0. Box 95085 Los Angeles, California 90045 Attn: Jack H. Irving (1)
Dr. Harold Mirels (1)
Ai Re s ea r c h Manufacturing Divis ion Phoenix , Arizona Attn: E. A. Kovacevich (1)
Allis -Chalme rs Manufacturing Company P. 0. Box 512 Milwaukee, Wisconsin 5 320 1 Attn: Dr. Thomas P. Meloy (1)
ARO, Inc. Arnold Ai r F o r c e Station Tennessee 37389 Attn: Dr. Clark €3, Lewis (1)
Dr. J. Lukasiewicz (1)
ASD (ASQWR) Det. 4 Eglin Air F o r c e Base, Flor ida Attn: W. H. Dit t r ich (1)
59 AI-1821 -A-3
U. S. Atomic Energy Commission Ge rmantown, Maryland Attn: Lt. Col. Go M. Anderson (1)
Col. E. Douthett, (1) SNAP- 50/SPUR Projec t Office
Herber t Rochen, (1) SNAP - 50 /SPUR Projec t Office
U. S. Atomic Energy Commission P. 0. Box 1102 Middletown, Connecticut Attn: H. Pennington, (1)
CANEL Project Office
U. S. Atomic Energy Commission (3) Technical Information Service Extension P. 0. Box 62 Oak Ridge, Tennessee
Atomics International P. 0. Box 309 Canoga Park , California Attn: C a r l E. Johnson (1)
AVCO Resea rch and Advanced Development Division 201 Lowell S t r ee t Wilmington, Massachusetts 01 887 Attn: Librar ian (1)
Dr. R, G. Payton (1)
Bal l is t ic Research Laborator ies Aberdeen Proving Ground Maryland Attn: DP, F. E. Allison (1)
Dr. F. D. Bennett (1) Dr. R, J. Eichelberger (1) Dr. J. T. Frasier (1) Dr. B, G. Karpov (1) J. H. Kineke (1)
Bel l Telephone Laborator ies Whippany, New J e r s e y Attn: Mr. Ca r l B, Loutzenheiser (1)
Dr. Daniel Pope (1)
Boeing Corporation Sea t t le 24, Washington Attn: Jack Lundebe rg (1 )
60 AI-1821-A-3
Guggenheim Aeronautical Lab0 rat0 ry California Institute of Technology 1201 East California S t r ee t Pasadena, California Attn: Prof . Julian D. Cole (1)
Prof . Lester Lees (1)
Jet Propuls ion Labora tory California Institute of Technology 4800 Oak Grove Drive Pasadena, California 91 103 Attn: General Documents Control f o r
Astronautics Information Abstracts (1)
Division of Geological Sciences California Institute of Technology Pasadena , Calif o rnia Attn: Dr. C. H. Dix (1)
California Research Corporation La Habra, California Attn: Dr. F. G. Blake, Jr. (1)
Convair -As tronautic s 5001 Kearny Villa Road San Diego 11, California Attn: Dr , Krafft A. Ehr icke (1)
Graduate School of Aerospace Engineering Cornel1 University Ithaca, New York Attn: Prof . E. L. Res le r , Jr . (1)
Douglas Missi le and Space Systems Division Santa Monicag California Attn: Dr. Mar t in Fiebig (1)
Dr. John K. W a l l (1)
Drexel Institute of Technology 32nd and Chestnut S t ree t Philadelphia 4, Pennsylvania Attn: Dr. Pei Chi Chou (1)
Dr. R. E. Llorens (1)
Elec t ro -Optical Sys tems I Inc. 125 North Vinedo Avenue Pas a de na, Calif o rnia Attn: Joseph Neustein (1)
Exotech, Inc. Alexandria, Virginia Attn: Dr. W. C. Cooley (1)
61 AI-1821-A-3
Genera l Atomic Division of General Dynamics Corporation P. 0. Box 608 San Diego, California Attn: Dr. M. J. Nowak (1)
Dr. M. L. Scharff (1) Dr. J. M, Walsh (1)
Genera l Dynamics /Astronautics P. 0. Box 1128 San Diego, California 92 11 2 Attn: Dr. J. J. Gilvarry, (1)
Mail Zone 596-00
Genera l Elec t r ic Company F1 ight P r o pul s ion La bo rat o r y Cincinnati 35, Ohio Attn: Mor r i s A. Zipkin (1)
Genera l Elec t r ic Company Resea rch Laboratory P. 0. Box 1088 Schenectady, New York 12301 Attn: Dr. Henry T. Nagamatsu (1)
Genera l Electric Company Miss i le and Space Division Space Sciences Laboratory Valley Forge Space Technology Center P. 0. Box 8555 Philadelphia 1 , Pennsylvania Attn: Edward Ray (1)
Mr. T. David Riney, (1) Rm. M7023F
Defense Research Laborator ies Genera l Motors Corporation Box T Santa Barba ra , California Attn: Dr. Jacques A. Chares t (1)
Dr. A. C. Char t e r s (1) J. S. Curt is (1) Dr. A.Q. Eschenroeder (1) J. W. Gehring, (1) Flight Physics Laboratory
Goodyear Ai rcraf t Corporation Akrons Ohio Attn: Mr. S. J. Pipitone (1)
62 AI-1821 -A-3
Harva r d University Cambridge, Massachuset ts 02 138 Attn: Dr. G. B. Benedek (1)
Illinois Institute of Technology Research Institute 10 West 35th S t ree t Chicago, Illinois 6 06 16 Attn: Mr. D. C. Anderson (1)
Dr. Thomas A. Zaker (1) Dr . F. J. Zimmerman (1)
Insti tute f o r Defense Analyses 400 Army-Navy Drive Arlington, Virginia 22202 Attn: L ib ra r i an (1)
Dr . F. B. P o r z e l (1)
Linden Laborator ies State College, Pennsylvania Attn: Dr. Henry P. Kirchner (1)
Lockheed Missi le and Space Company P. 0. Box 504 Sunnyvale, California Attn: Char les Bur re l l (1)
Lockheed Aircraf t Corporation Mis s i l e Sys tems Division Pa lo Alto, California Attn: Hal H. Greenfield (1)
Ar thu r D. Little, Inc. Cambridge 40, Massachuset ts Attn: L ib ra r i an (1)
Ar thu r D. Little, Inc. 30 Memor ia l Drive Cambridge 42, Massachuset ts Attn: N. Wiede rhorn (1 1
Los Alamos Scientific Laboratory P. 0. Box 1663 Los Alamoss New Mexico 87544 Attn: Dr. Melvin H. Rice (1)
M. B, Associates 1279 Boulevard Way Walnut Creek, California Attn: Dr. D. Sawle (1)
63 AI - 1 82 1 -A- 3
.
The Mart in Company Bal t imore, Maryland 21 203 Attn: Dr. Joseph Sternberg, (1)
Space Systems Division, Mail No. 390
McGill University McDonald Engineering Building Montreal, Canada Attn: G. V. Bull (1)
National Aeronautics and Space Administration Ames Research Center Moffett Field, California 94035 Attn: Librar ian (1)
D. E. Gault (1) C. R. Nysmith (1) J. Summers (1)
National Aeronautics and Space Administration Scientific and Technical Information Faci l i ty Box 5700 Bethesda 14, Maryland Attn: NASA Representative (1)
National Aeronautic s and Space Administration Goddard Space Flight Center Greenbelt, Maryland 20 7 7 1 Attn: Mer le Alexander (1)
Milton Schech (1)
National Aeronautics and Space Administration Jet Propulsion Laborator ies California Insti tute of Technology 4800 Oak Grove Drive Pasadena, California Attn: John Paulson (2)
National Aeronautic s and Space Administration Langley Research Center Langley Station Hampton, Virginia 23365 Attn: Librar ian (1)
National Aeronautics and Space Administration Lewis Research Center 21000 Brookpark Road Cleveland, Ohio 44 1 3 5 Attn: D. Besnatowicz (1)
R. Denington (1) John E. Dilley, (1) Contracting Officer, MS 86- 1
64 AI - 1 82 1 -A- 3
National Aeronautics and Space Administration Lewis Research Center 2 1000 B rookpark Road Cleveland, Ohio 441 35 Attn: J . B . E s g a r (1)
John J. Fack le r (SPSPS) (1) Mr. G. Goldberg (1) M. Gutstein (3) Seymour Lieblein, (2) Fluid Systems Components Division I. J. Loeffler (1) B. Lubarsky, (1) Space Power Systems Division George Mandel, (1) L ib r a r ian Roger Mather (1) Norman T. Musial (Patent Counsel) (1) Henry 0. Slone, (1) SNAP-8 Branch Gordon T. Smith (1) F. S. Stepka (1)
National Aeronautics and Space Administ ration Manned Spacecraf t Center Houston 1, Texas Attn: L ib ra r i an (1)
Paige Burbank (1 )
National Aeronautic s and Space Administration Marsha l l Space Flight Center Huntsville, Alabama 35812 Attn: Dr. E. D. Ge i s s l e r (1)
Dr. O.K. Hudson (1) W. Johnson (1) W.D. Murphree (1) Russel l H. Shelton (1) Dr. E r n s t Stuhlinger (1)
National Aeronautic s and Space Administration 600 Independence Avenue SW Washington, D. C. 20546 Attn: Dr. R. L. Bisplinghoff (1)
M. T. Charak (1) C. T. D'Aiutolo (1) J. W. Kel le r (1) J a m e s J. Lynch (RN) (1)
National Aeronautic s and Space Administration Office of Scientific and Technical Information Washington, D. C. Attn: AFSS-A (1)
65 AI-1821-A-3
National Ae ronautic s and Space Administration Western Operations Office 150 Pic0 Boulevard Santa Monicap California Attn: John Keeler (1)
U. S. Naval Ordnance Laboratory W h i t e Oak, Silver Spring, Maryland 20910 Attn: V. C. D. Dawson (1)
Dr. J. W. Enig (1) Eva Liebe rman, Librar ian (1) R.K. Lobb (1) R. P i aces i (1) A. E. Seigel (1)
Naval Research Laboratory Washington, D. C. Attn: W. W. Atkins (1)
Mrs . Katherine H. Cass , (1) Code 1572 S. M. Halperson ( 1 ) Dr. H. Marcus, (1) Mechanics Division
North American Aviation, Inc. Los Angeles 45, California Attn: Advanced E lec t r i ca l Projects (1)
North Amer ican Aviation, Inc. Space and Information Systems Division 12214 Lakewood Avenue Downey, California 90241 Attn: Mr. C. A. Papp ( 1 )
Oak Ridge National Laboratory Oak Ridge, Tennessee Attn: W. D. Manly (1)
Office of Naval Research Department of the Navy, Code 735 Washington, D. C. 20360 Attn: E. E. Sullivan (1) For : Code 429
Pennsylvania State University State College, Pennsylvania Attn: Dr. H, H. Calvit (1)
Prof . N. Davids (1)
66 AI- 1821 -A- 3
Phys ics International, Inc. 2229 Four th S t ree t Berke ley 10, California Attn: Mr. J e r e G. Harlan (1)
Pratt & Whitney Aircraf t East Hartford, Connecticut Attn: W i l l i a m H. Pedolny (1 )
The RAND Corporation 1700 Main S t ree t Santa Monicas California 90406 Attn: Dr. Harold Brode (1)
F. R. Collbolm (1 )
Republic Aviation Corporation Farmingdale , Long Island, New York Attn: Dr. W i l l i a m McIlroy, (1)
Power Conversion System Division
Sandia Corporation Sandia Base Albuquerque, New Mexico Attn: Mr . R. C. Bass (1)
Dr. W. Her rmann (1)
Shock Hydrodynamics Inc. She rrnan Oaks, California Attn: Dr. R. L. Bjork (1)
Space Technology Laborator ies , Inc. P. 0. Box 95001 Los Angeles 45, California Attn: George E. Mueller (1)
TRW, Space Technology Laborator ies One Space P a r k Redondo Beach, California Attn: Dr. Saul Altshuler (1)
Stanf o r d Res ea r c h Institute 333 Ravenswood Road Menlo P a r k , California Attn: Dr. D. R. C u r r a n (1)
Stanford University Stanford, California 94305 Attn: Prof , M. D. VanDyke, (1)
Dept. Aeronautics & Astronautics
6 7 AI - 1 82 1 -A- 3
f .4
. State University of New York at Buffalo Division of Interdisciplinary Studies Buffalo, New York 14214 Attn: Dr. David Benenson (1)
Prof. I. H. Shames (1)
Technik, Inc. 50 Je r i cho Turnpike Jer icho , New York Attn: Mr . Paul Marnel l (1)
Tech/Ops, Inc. Burlington, Massachuset ts Attn: V . E . S c h e r r e r (1)
Tennessee Polytechnic Institute Cookeville, Tennessee Attn: Prof. R. Kinslow (1)
T h e r m Advanced Research, Inc. (1) 100 Hudson C i rc l e Ithaca, New York
Thompson Ram0 Wooldridge, Inc. New Devices Labora tory 7209 Platt Avenue Cleveland 4, Ohio Attn: L ib ra r i an (1)
Universi ty of California B e rke le y, Calif o rnia 94 72 0 Attn: Prof . Werne r Goldsmith (1)
University of California Los Angeles, California 90024 Attn: Prof . N. Rott, (1)
Dept. of Engineering
Universi ty of California Lawrence Radiation Labora tory P. 0. Box 808 Live r m o r e , California Attn: Dr. Russel l E. Duff (1)
Universi ty of Oklahoma Norman, Oklahoma Attn: Dr. F. C. Todd (1)
Unive r s i ty of Roches te r Rochester , New York Attn: Dr. Robert G. Loewy, (1)
Dept. Mech, & Aerospace Sci.
68 AI-1821-A-3
Institute f o r Aerospace Studies University of Toronto Toronto, Ontario, Canada Attn: Dr. I. Glass (1)
United Elec t ro Dynamics, Inc. Pasadena, California Dr. E. A. Fl inn (1)
Utah Research and Development Corporation 1820 South Industrial Road Salt Lake City, Utah 84014 Attn: Dr. E. Cannon (1)
W es tinghous e Elec t r ic Corporation Ast ronuclea r Laboratory P. 0. Box 10864 Pi t tsburgh 36, Pennsylvania Attn: L i b r a r y ( 1 )
Mater ia l s Labora tory Phys ic s Division Wright Field, Ohio Attn: Mr. Alan K. Hopkins (1)
69 AI-1821-A-3