C:My documents\salesofficeandrew\Ford Falcon FG

Revision 1 – 17/08/10.

This is an Uncontrolled document.

270133.7

L.P. GAS CYLINDER

INSTALLATION INSTRUCTIONS

FORD FALCON UTILITY

FG SERIES

(TRAY & STYLE-SIDE)

This Automotive LP Gas cylinder must be installed in the vehicle in strict accordance with the latest

requirements of AS/NZS1425. Any modifications to the cylinder will render the warranty null and void.

GENERAL CYLINDER SPECIFICATIONS:

DIAMETERS : 330MM LENGTH: 813MM

CAPACITY : 62L (Water) L.P GAS CAPACITY : 50L

VALVE ORIENTATION : 30 degrees.

Modifications: Exhaust relocation required.

This cylinder is designed to be mounted underneath the vehicle in the current position of the exhaust

muffler.

1. Remove the exhaust muffler and tail pipe 2. If the vehicle is a style-side utility, remove

assembly to create space for the tank. the plastic tub.

C:My documents\salesofficeandrew\Ford Falcon FG

Revision 1 – 17/08/10.

This is an Uncontrolled document.

3. The cylinder is designed to be mounted 4. If the vehicle contains a tray back, use the

to the crossrails underneath the vehicle. cross rails shown for mounting.

Jack the cylinder into position, ensuring

the valves are facing outwards toward the

driver-side and the brackets line up with

the cross rails. Mark the hole locations and

drill 11mm dia holes through the cross rail.

5. If the vehicle is style-side (tub) use a 6. Bolt the cylinder into position making

hole saw to cut an opening in the top sure the cylinder and stoneguard is not

large enough to fit the backing plates and touching the vehicle at any point.

bolts into the cross rails.

6. Refit the exhaust in accordance with

AS/NZ 1425.