Instruction Manual

24" FULL HD LED MONITOR

LT-24CM69BE

ii

Contents

Safety Warnings ..............................................................................................................1

Unpacking ........................................................................................................................4

Installing / Removing the Base Stand ..........................................................................5Assembling the Stand Base............................................................................................................... 5Mounting the Monitor ........................................................................................................................ 6Detaching the Stand Base ................................................................................................................. 6

Product Overview ...........................................................................................................7Main Unit .................................................................................................................................................. 7

Connection ......................................................................................................................8

Adjusting the Angle ........................................................................................................9

Basic Operating ............................................................................................................ 10Monitor Controls .................................................................................................................................10Eco Friendly / Auto Standby Function ........................................................................................10Auto Adjust Image .............................................................................................................................. 11

Customizing Settings ...................................................................................................11Adjustment Settings .......................................................................................................................... 11

Maintenance ..................................................................................................................13Cleaning the Unit ................................................................................................................................ 13

Hints and Tips ................................................................................................................13

Useful Information and Licences .................................................................................17

1

Safety Warnings

• Do not install the monitor on a ceiling or an inclined wall.

• Only use the screws supplied with the wall mount bracket when attaching the monitor to the bracket. See your monitor instructions for screw type.

• Tighten the wall mount screw firmly to prevent the monitor from falling. Do not over tighten the screws.

• If you are in any doubt how to mount your monitor, contact a professional.

Temperature• Avoid extreme degrees of temperature,

either hot or cold. Place the unit well away from heat sources such as radiators or gas / electric fires.

• Avoid exposure to direct sunlight and other sources of heat.

Naked Flames• Never place any type of candle or naked

flame on the top of or near the unit.

Moisture• To reduce the risk of fire, electric shock or

product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, should be placed on the unit.

• If you spill any liquid into the unit, it can cause serious damage. Switch it off at the mains immediately. Withdraw the mains plug and consult your dealer.

Ventilation• To prevent the risk of electric shock or

fire hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.

• A minimum distance of 5 cm around the unit should be maintained to allow for sufficient ventilation.

• Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.

Safety• Always disconnect the unit from the

mains supply before connecting / disconnecting other devices or moving the unit.

• Unplug the unit from the mains socket during a lightning storm and long inactivity periods (going on holiday).

• Read all the instructions carefully before using the unit and keep them for future reference.

• Retain the manual. If you pass the unit onto a third party make sure to include this manual.

• Check that the voltage marked on the rating label matches your mains voltage.

• WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised.

• To avoid danger of suffocation, keep plastic bags out of reach of babies, children and domestic animals.

• Carefully attach the stand to the monitor. If the stand is provided with screws, tighten the screws firmly to prevent the Monitor from tilting. Do not over tighten the screws and mount the stand rubbers properly.

Damage• Please inspect the unit for damage after

unpacking.• Do not continue to operate the unit if

you are in any doubt about it working normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer.

Location of Unit• The unit must be placed on a flat stable

surface and should not be subjected to vibrations.

• Do not place the unit on sloped or unstable surfaces as the unit may fall off or tip over.

• The mains socket must be located near the unit and should be easily accessible.

• This unit is designed for indoor, domestic use only.

• Use this monitor set at an altitude of less than 2000 meters above sea level, in dry locations and in regions with moderate or tropical climates.

Wall Mounting• Read the monitor and wall mount

instructions before mounting your monitor on the wall.

• The wall mount bracket is not supplied, they can be purchased from your dealer.

2

• In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it off and disconnect the mains plug from the mains socket.

Mains Adapter Cable• Make sure the unit or unit stand is not

resting on top of the mains cable, as the weight of the unit may damage the mains cable and create a safety hazard.

• A damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the monitor by pulling the power cord.

• Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with other cords.

• If the mains cable is damaged it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

• The mains adapter will continue to draw electricity from the mains supply when plugged in the mains socket. In the interests of safety and to avoid unnecessary energy consumption, never leave the adapter plugged in the mains socket while unattended for long periods of time. Disconnect the adapter from the power supply.

Use only power supplies listed in the user instructions.

Interference• Do not place the unit on or near

appliances which may cause electromagnetic interference. If you do, it may adversely affect the operating performance of the unit, and cause a distorted picture or sound.

Optimum viewing• View the unit in moderate light to

prevent eye strain. It is recommended to watch the unit from a distance 3-7 times that of the screen height.

LCD screen• The LCD screen is manufactured using

high-precision technology. However, some tiny black points and / or bright points (red, blue or green in colour) may constantly appear on the LCD screen. These points are generated in the manufacturing process and are normal.

Screen Burn• A characteristic of Plasma and Monitor

Panels is that displaying the same image for a long time may cause a permanent after-image to remain on the screen. This is called screen burn. Most pictures shown on the unit will be constantly moving and fill the screen.

• To prevent screen burn if viewing any of the above for long periods of time, reduce contrast and brightness when viewing. Once burn-in occurs it will never disappear completely.

Standby • The button on the unit does not

switch off the unit completely. The unit will continue to draw electricity from the mains supply while in standby. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit in standby while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Disconnect the mains plug from the mains socket.

Supervision• Children should be supervised to ensure

that they do not play with the unit.• Never let anyone especially children push

anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.

Earthing• Apparatus connected to the protective

earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing - and to a monitor distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a monitor distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator, see EN 60728-11).

3

CAUTIONRISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.

Service• To reduce the risk of electric shock, do

not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

• Do not open any fixed covers as this may expose dangerous voltages.

Maintenance• Ensure to unplug the unit from the mains

socket before cleaning.• Do not use any type of abrasive pad or

abrasive cleaning solutions as these may damage the unit’s surface.

• Do not use liquids to clean the unit.• The wall socket plug is used as a

disconnect device, the disconnect device should be readily accessible.

• This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

4

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Thank you for purchasing your new JVC LED Monitor.

We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Main Unit Stand Neck Base

Instruction ManualMains Adapter CableHDMI Cable

• If items are missing, or damaged please contact Partmaster (UK only). Tel: 0344 800 3456 for assistance.

• If you require additional assistance: For UK, please call our UK Call Centre on 0344 561 1234. For Ireland, please call our Ireland Call Center on 1 890 818 575.

5

Installing / Removing the Base Stand

The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the monitor at any time because the screen could crack.

Disconnect all cables connected to the monitor.

Lay the monitor down on a flat surface with the back side facing up, and ideally at the edge of a table so that the base of the monitor slightly overhangs on it. Please make sure a soft cushioned material (such as a towel or thick piece of foam) is placed beneath the screen. Leave the protective bag on your monitor until you have fully attached the monitor stand.

Assembling the Stand Base1. Slide the stand neck to the monitor stand slot.

• Please read this instruction manual carefully while setting up your monitor.• If you require additional assistance:

For UK, please call our UK Call Centre on 0344 561 1234. For Ireland, please call our Ireland Call Center on 1 890 818 575.

2. Attached the base to the stand neck until hear the click sound.

6

Remove the stand assembly before mounting the monitor onto the wall.

Mounting the MonitorThis monitor is designed to be wall-mounted with a standard mounting kit (sold separately) designed for flat-panel monitors. Mount this monitor according to the instructions included in the mounting kit. Due to space restrictions, we recommend that you make all connections before mounting on to the wall.

100 mm

100 mm

Four mounting holes(size M4-8mm screw)

Monitor Weight (Without Stand): LT-24CM69BE: 2.38 kg

Detaching the Stand BaseTo remove the stand assembly, lay the monitor on a flat surface with a cushioned material between the monitor and the surface, to prevent damage. Slide to remove the stand assembly.

7

M

E

HDMI VGA DC

Product Overview

Main UnitFront View

Rear View

2. M Button• Display or exit

main menu.

3. E Button• Access the menus.• Executed the “Auto

Adjust Image”

4. Button

5. Buttons

6. HDMI socket

7. VGA socket

8. DC socket

1. Power LED• Illuminates when

the monitor is in On mode.

• Flash when the monitor is On but haven’t received any signal (Standby mode).

• Light will go off when the monitor is in Off mode.

2

3

46 7 8

5

1

8

Connection

1. Insert the desired cable into the matching connector on your computer.

HDMI VGA DC

HDMI VGA DC

HDMI Cable(included)

HDMI Socket

2. Connect the power cord from the monitor DC power supply to a mains socket.

VGA Cable(not included)

VGA Socket

3. Press the button to turn on the monitor. The LED light at the side of monitor will light up. If there’s no signal received after few seconds, a pop up message will be displayed and the LED light will flash.

If you are using an Apple® computer, an Apple® adapter is required. The adapter can be purchased at an Apple® store.

Connect the input signal cable and tighten it by turning the screws clockwise. To prevent disconnection secure the cable firmly, do not over tighten.

9

Adjusting the Angle

1. Place the monitor in an upright position, mounted on the stand base.

2. Adjust the angle of the screen. The angle of the screen can be adjusted forwards or backwards from -5° to 15° for a comfortable viewing experience.

–5° 15°

Front side

Rear side

• When you adjust the angle, do not hold the bottom of the monitor set frame as shown, it may injure your fingers.

• Be careful do not touch or press the screen area when adjusting the angle of the monitor.

10

Basic Operating

Monitor Controls1. Press the desired button at the rear of the monitor.

2. Press the buttons to change the value of the menu then press the E button to confirm the selection.

3. To return to the upper menu or exit the OSD menu, press the M button.

Button Description

M • Display the OSD menu.• Return to the upper menu or exit the

OSD menu.

E • Access the main menus.• Executed the “Auto Adjust Image.”

function automatically.

• Navigate the OSD menus.• Increase the bar value as the right

function selection key.• Direct go to situational mode.

• Navigate the OSD menus.• Decrease the bar value as the left

function selection key.

Switch the monitor on or off.

Eco Friendly / Auto Standby FunctionThe unit features an ECO-Power / Standby mode. If the monitor does not receive an input signal for serveral seconds, it will automatically switch the monitor into standby mode. The LED light at the side of monitor will keep flashing. Once have input signal come in, the monitor will automatically switch on.

If the monitor is left on and idle for 4 hours, it will automatically switch to off mode. The LED light will go out. Press the button at the rear of the monitor to turn on your monitor.

A reminder screen will pop up and count down before the switches to standby mode or off mode.

M

E

• Always disconnect the monitor from the mains socket when not in use for a long period of time.

• The button at the rear of the monitor is only used for switching the monitor into standby, it does not disconnect the monitor from the mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket.

11

Auto Adjust ImageThis function provides the user with optimal display settings.

• When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

• When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the E button to improve resolution.

Customizing Settings

Adjustment SettingsPress the M button to display the OSD main menu.

Brightness Contrast DCR Mode Colour Temp. Aspect Input Adjust Other Exit

1. Press the buttons to navigate the OSD menus or adjust the system settings to your preference. Finally press the E button to confirm.

2. If you want to exit the menus, select from the menu or press the M button to return to the upper menu. Or select from the menu to leaving the main menu.

Each option is described below.

Function Description

Increases or decreases the amount of white in the picture.

Adjusts the difference between light and dark levels in the picture.

Select ON or OFF to enable or disable a DCR (Dynamic Contrast Ratio).Dynamic Contrast Ratio also called contrast ratio. With a wider range between black and white. A monitor is capable of deeper, richer colours with more visible details in shadows and highlight. When DCR turns ON, you will get a better contrast.When DCR is set to ON, setting of brightness and contrast will disable.

Select among picture mode: Standard / Movie / FPS (First-person shotter game) / RTS (Real-time strategy game) / Eye Saver.Eye Saver is optimized your viewing comfort by smartly reducing blue light emissions.

Select among colour temperature: Cool / Warm / User.Adjusts the colour components independently to achieve a warm or cool colour. (for User mode)R: Adjust red color temperatureG: Adjust green color temperatureB: Adjust blue color temperature

12

Allows you to watch the screen in various picture formats: Auto / 16:9 / 4:3.

Select the input source: VGA / HDMI.

Auto AdjustAutomatically adjust the horizontal / vertical location, focusing and clock of pictures. (VGA signal only)

Auto ColourAdjust the white balance of picture. (VGA signal only)

GammaWhen using the Gamma 1, and Gamma 2 monitor settings, higher gamma settings mean a brighter image is displayed and vice versa.

ClockTo obtain the correct width of the input signal by adjusting the frequency. Used to minimizethe vertical bars that appear because of an incorrect width. (VGA signals only)

PhaseUsed to optimize screen performance by adjusting the phase. (VGA signals only)

LanguageAllows you to select your desired on screen menu language. The default is English.

Power OffSelect ON if there's no singal input, the unit will automatically switch from standby mode to off mode after 1 minute. The LED light also stop flashing. The default is Off.

Timer OffThe unit will automatically switch to standby mode 4 hours after the last time was used. A reminder screen will pop up and count down before the unit switches to standby mode. The default is On.

ResetSelect YES to restores the default factory settings. Select NO to cancels the reset.

OD (Overdrive)Select ON / OFF to activate overdrive function (this needs the support of the monitor).Without overdrive, the monitor are prone to ghosting. Ghosting is typically caused by the asymmetric speeds of pixel transitions.

13

Maintenance

Cleaning the Unit

Hints and Tips

The following table contains various hints and tips to get the best performance from your monitor. If you require additional assistance:

• For UK, please call our UK Call Centre on 0344 561 1234.

• For Ireland, please call our Ireland Call Center on 1 890 818 575.

Problem Solution

No image on screen • Check if the power button has been switched on.• Verify the brightness and contrast of the monitor is

within the normal setting.• Check if the power indicator is turns on. If so, this

indicates that the monitor is not recieving the input signal.

• If the signal indicator is a notebook or laptop, make sure that the signal has been switched to screen mode.

• Make sure that the computer is turned on and is not sleeping.

• Make sure that the correct input is selected.

Out of Focus • Check if the image signal cable is inserted properly.

Ensure the unit is fully unplugged from the mains socket before cleaning.

• Use a soft dry cloth to wipe away the dust from the screen and surfaces.

• If the surfaces are extremely dirty, clean the monitor with a cloth which has been dipped in a slightly soapy water. Wring the cloth until it is almost dry, then use it to wipe the monitor.

• Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching the monitor on.

Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals.Do not use compressed air to remove dust.

14

Flashing Screen • The power is insufficient to connect the monitor or is too weak.

• To avoid a magnetic field around the monitor, move devices like speakers, flourescent lights, AC transformers, table fans, etc. farther away.

• By pressing the E button, the Auto Adjust Image function will automatically apply optimized settings to the display.

Wrong or Unusual Color • If red, green, blue, or any of the color disappears, check to see if the signal cord is connected properly. If the plub is loose it might cause a bad connection.

• Try connecting another PC for comparison.

Horizontal Screen Rolling

• Retighten the signal cable.

15

Product Fiche and SpecificationsBrand JVCModel LT-24CM69BEEnergy Efficiency Class AScreen Size (measured diagonally) Approx. 60 cm (23.6 inch)Power Consumption 24.0 WAverage Annual Energy Consumption *(Please refer to *1 under this table)

35 kWh

Standby Power Consumption 0.40 WDisplay Resolution 1920 pixels (horizontal) x 1080 pixels (vertical)Panel System 23.6 inch LED Backlit LCD PanelBrightness 220 cd/m2

Contrast Ratio 3000:1Peak Luminance (On-Mode) 66.7%Power Source 100-240V~50/60HzOff Power Consumption 0.30 WOperating Temperature 0°C – 40°COperating Humidity 20% – 80%Mercury Content (mg) <2.0 mgPresence of Lead * (Please refer to *2 under this table) 3

Reference Period 2010/1062 – 2020

Dimension (W x D x H) With Stand: 565.3 x 180.8 x 430 mm Without Stand: 565.3 x 53.7 x 335 mm

Weight (Net) With Stand: 2.78 kgWithout Stand: 2.38 kg

Tilt Range -5°~15°Power Adapter (Use only adapter listed below)Power Adapter Manufacturer SHENZHEN SOY TECHNOLOGY CO., LTD.Power Adapter Model SOY-1200250GBInput 100~240V AC 50/60HzOutput 12V DC 2.5AInputsHDMI 1VGA 1

Features and specifications are subject to change without prior notice.

*1 Energy consumption per year based on the power consumption of the monitor operating 4 hours per day for 365 days. The actual energy consumption will depend on how the monitor is used.

*2 This monitor contains lead in certain parts or components where no technology alternatives exist in accordance with existing exemption clauses under the RoHS Directive.

16

A

WattkWh/annum

cm inch2010/1062 - 2020

LT-24CM69BE

3524

60 23.6

17

Useful Information and Licences

The adopted trademarks HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

All trademarks are the property of their respective owners and all rights are acknowledged.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

All the support you need.

Currys.co.uk Whether it’s a tech emergency or you need plain good advice,

we’re always on hand to help, call (UK) 0344 5611234 or (Ireland) 1 890 818 575.

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate.

The product is distributed and warranted exclusive by DSG Retail Ltd. “JVC” is the trademark of JVCKENWOOD Corporation, used by DSG Retail Ltd. under license.

(IB-LT-24CM69BE-190920V4)

Dear Customer,

This apparatus is in conformance with the valid European directives compatibility and electrical safety.

DSG Retail Ltd. (co. no. 504877)1 Portal Way, London, W3 6RS, UK

EU Representative DSG Retail Ireland Ltd (259460) 3rd Floor Office Suite Omni Park SC, Santry, Dublin 9, Republic of Ireland

For Help and Support CallUK: 0344 561 1234

Ireland: 1890 818 575

Hereby, DSG Retail Ltd., declares that this monitor (LT-24CM69BE) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.teamknowhow.com/Click on SEARCH and enter the model number.