2300 series vibration monitors datasheet - 105m0340 · for relay contacts. the 2300/20 monitor...

DescriptionThe 2300 Vibration Monitors provide cost-effective continuous vibration monitoring and protection capabilities for less critical and spared machinery. They are specifically designed to continuously monitor and protect essential medium to low criticality machinery in a wide range of industries including: oil & gas, power generation, water treatment, pulp and paper, manufacturing, mining, cement, and other industries.

The 2300 Vibration Monitors deliver vibration monitoring and high vibration level alarming. They include two channels of seismic or proximity measurement inputs from various accelerometer, Velomitor and Proximitor types, a speed input channel for time-synchronous measurements, and outputs for relay contacts. The 2300/20 monitor features a configurable 4-20 mA output which interfaces more points to a DCS. The 2300/25 monitor features System 1connectivity for Trendmaster SPA interface which enables users to leverage existing DSM SPA infrastructure.

The 2300 Vibration Monitors are designed for use on a broad range of machine trains or individual casings where the sensor point count fits the monitor’s channel count and where advanced signal processing is desired.

2300 Series Vibration MonitorsDatasheetBently Nevada Machinery Condition Monitoring 105M0340 Rev. V

Monitor Key Features2300/20

l Two 4-20 mA outputs with internal current loop power supply.

l Continuous monitoring and protection l Two acceleration/velocity/proximity inputs with

synchronized sampling for advanced diagnostics.

l One dedicated speed channel supporting Proximity probes, Magnetic pickup and Proximity switch type sensors.

l Supports process variable on all three input channels.

l Key measurements (Acceleration pk, Acceleration rms, Acceleration pk/rms, Velocity pk, Velocity rms, Displacement pp, Displacement rms, Speed) real-time provided with alarm configuration.

l Each channel has one measurement group and two bandpass measurements.

l LCD and LED for real time value and status display.

l Ethernet 10/100 Base-T communication for configuration using Bently Nevada Monitor Configuration software (Included) with RSA encryption.

l Local contacts for positive engagement of channel bypass, configuration lockout, and reset.

l Two relay outputs with programmable setpoints. l Three buffered transducer outputs (including

Keyphasor signal) providing short circuit and EMI protection. Buffered outputs for each signal are through BNC connectors.

l Modbus over Ethernet. l Alarm Data Capture

Caution: Two 4-20 mA outputs will NOT work with an external powered loop.

2300/25

l Trendmaster SPA interface. l Continuous monitoring and protection. l Two Acceleration/Velocity/Proximity inputs with

synchronized sampling for advanced diagnostics.

l One dedicated speed channel supporting Proximity probes, Magnetic pickup and Proixmity switch type sensor.

l Support process variable on all three input channels.

l Key measurements (Acceleration pk, Acceleration rms, Acceleration pk/rms, Velocity pk, Velocity rms, Displacement pp, Displacement rms, Speed) real-time provided with alarm configuration.

l Each channel has one measurement group and two bandpass measurements.

l LCD and LED for real time value and status display.

l Ethernet 10/100 Base-T communication for configuration using Bently Nevada Monitor Configuration software (included) with RSA encryption.

l Local contacts for positive engagement of channel bypass, configuration lockout, and reset.

l Two relay outputs with programmable setpoints. l Three buffered transducer outputs (including

Keyphasor signal) providing short circuit and EMI protection. Buffered outputs for each signal are through BNC connectors.

l Modbus over Ethernet.

2/24

2300 Series Vibration MonitorsDatasheet 105M0340 Rev. V

SpecificationsInputs

Power Input

DC Input 18~36 Vdc, max 7.5 W

Channel Types

ICP Accelerometers

Configurable Bandpass filter

0.2 Hz to 20 kHz

Scale Factor range 5 to 1000 mV/g

Full scale range 2 to 80 g peak

Current Sink Source

3.3 mA ± 5%

Open Circuit Voltage

-21 to -24 Vdc

Velocity


0.2 Hz to 20 kHz

Scale Factor range 5 to 1000 mV/in/s

Full scale range 0 to 50 in/s peak

Radial Vibration


0.2 Hz to 20 kHz

Scale Factor range 5 to 1000 mV/mil

Full scale range 0 to 160 mil peak-peak

Thrust Channel

Scale Factor range 5 to 1000 mV/mil

Process Variable Channel

Support most of unit with default on Temperature

Channel Hardware Specification

Configurable Upper OK limit

-0.25 to -22 V (greater than lowerOK)

Channel Types

Configurable Lower OK limit

-0.25 to -22 V (less than upperOK)

Accuracy: ±1% of full scale range

Independent 24-bit ADCs on input channels

Supports Bently transducer or 2/3 wires custom transducer for Accelerometers, Velomitor and Proximitor.

Speed/Keyphasor

Keyphasor transducers support multiple events per revolution and event ratios for speed inputs up to 20 kHz.

Threshold voltage resolution

0.1 Vdc

Interfaces

Proximity Transducer Interface

Supply Voltage -22.8 to –25.2 Vdc

Maximum Rated Current

15 mA

Short Circuit Current

15.1 mA to 23.6 mA

Accuracy ±1% of full scale range

Input Impedance 3-wire Voltage Mode, 10 kΩ

RPM range 6 to 120,000

Proximity Switch Interface

Supply Voltage -10 to -24 Vdc

Lower Not Ok limit -2.75 ±0.05 V

Rpm range 6 to 60,000

Other Inputs

Magnetic Pick up

Input voltage Adapt to sensor 284947 output

3/24


Other Inputs

RPM range 200 to 120,000

Contact Inputs

Monitor provides 3 contact capabilities with input terminals

Configuration lockLatched alarm/relay reset functionMonitor Alarm/Relay Inhibit

Activate 0 to 10 kΩ

De-activate 150 kΩ to infinite

Button Inputs

External button to reset latched alarm and relay

One buried button provides 3 functions

l Display monitor information l LCD contrast adjustment l Reset settings to default

Display Monitor Information

Reset listed settings to Default

l User account name l IP Address l FW/HW version

Jumper Between COM & Chassis GND

Jumpers are 2-pin terminal interfaces that connects COM to the Chassis ground (GND).

Alternatively, COM can be connected to an earth ground separately through a terminal.

Outputs

Buffered Output

Three buffered outputs are available on the monitor through BNC connectors

2 Vibration Outputs 1 Speed Output

Relays

Relays provide two dry-contact outputs

May be normally energized or de-energized

No output feedback determination

Relay Circuit Specification inNon-Hazardous Area

Type Single pole, double throw

Sealing Epoxy sealed

Contact life 100,000 cycles @ 5 amps 250 Vac

200,000 @ 1 amp, 24 Vdc

Insulationresistance 1000 MΩ minimum @ 500 Vdc

Relay closed contact resistance

1 Ω maximum

Relay open contact resistance

1 MΩ minimum

Maximum switched contact voltage

250 Vac / 250 Vdc

Maximum breaking contact current

6 A @250 Vac / 6 A @24 Vdc

Maximum switched power

1500VA AC / 150 Watts DC

4/24


Relay Circuit Specification inHazardous Area

Maximum switched contact voltage and current

6 A @24 Vac / 5 A @ 30 Vac / 5.8 A @24 Vdc / 4 A @30 Vdc

4-20mA Output (2300/20)

Two 4-20 mA outputs with internal current loop power supply

4 to 20 mA output values are proportional to the full-scale of the associated measurement.

Software configuration may determine the variable of each output. Voltage compliance: 0 to +12 Vdc range across load.

Load resistance: 0 to 600 Ω

Resolution: 0.3662 µA

Accuracy: 1% over operating temperature range

Update rate: 100 ms

Configurable with default 2 mA clamp current

No output feedback determination

Caution: Two 4-20 mA outputs will NOT work with an external powered loop.

SPA Output (2300/25)

Input signal range

High AC: 8 Vpp Low AC: 1.6 Vpp DC GAP: 0 to -20 Vdc (max measurable AC signal is 1 Vpp).

Accuracy High/Low AC: ±1% of Full-Scale at 100 Hz DC GAP: ±0.5 V (measurable AC accuracy: ±20 mV)

Frequency response

10 Hz to 3000 Hz ±5%

LEDs

OK Indicates when the monitor is operating properly.

Protection fault Indicates hardware fault that is impacting alarm determination.

Relay Circuit Specification inHazardous Area

User inhibit Indicates the alarm/relays have been intentionally inhibited from operation.

Bypass Indicates user initiated bypass action.

Relay status Indicates if relays have been activated.

TX/RX Indicates the Ethernet status and monitor communicating with remote software.

SPEED/AUX channel status

Indicates the speed channel has valid speed signal input OR operating correctly when AUX.

Channel Alarm Status

Alert LED Engages if any channel is in alert state.

Danger LED Engages if any channel is in danger state.

LCD Display

Allows viewing machine speed, vibration measurements value, setpoints, and configuration information.

5/24


Communications

Ethernet Ethernet, 10Base-T and 100Base-TX. Conforms to IEEE802.3 RJ-45 for 10Base-T/100Base-TX Ethernet cabling Cable length: 100 meters (328 ft.) maximum

Environmental Limits

Operating Temperature

-30°C to +65°C (-22°F to +149°F)

Storage Temperature

-40°C to +85°C (-40°F to +185°F)

Humidity Up to 95%, non-condensing

Vibration Limitation

3 g

Battery Life for Real Time Clock

Powered: 38 years @ 50°C (122°F) Un-powered: 12 years @ 50°C (122°F)

Physical

Dimensions (Width x Depth x Height)

127 mm x 127 mm x 76.2 mm (5 in. x 5 in. x 3 in.)

Weight 1.03 kg (2.26 lbs)

Mounting Panel mount or DIN rail (adapter included)

System 1 Evolution Connectivity2300 monitors connect to System 1 Evolution and support current value and time-based data collection of all static values, waveforms, and spectral data. This includes System1 Software's full suite of plots and tools for condition monitoring and asset management.

When and event is triggered on the 2300 monitor, the following high-resolution alarm data is forwarded to System 1.

Trend Measurements:

Duration Intervals

Pre-Event Data 10 minutes 1 second

20 seconds 100 milliseconds

Post-Event Data 10 seconds 100 milliseconds

1 minute 1 second

Spectrums/Waveforms:

Duration Intervals

Pre-Event Data 2.5 minutes 10 seconds

Post-Event Data 1 minute 10 seconds

In the event of a network disruption between the 2300 and System 1, the 2300 can store up to at least 5 alarm data captures. (This requires System 1 Evolution 21.1 or newer and Firmware release 3.2 or newer for 2300.)

6/24


Compliance and CertificationsFCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

l This device may not cause harmful interference.

l This device must accept any interference received, including interference that may cause undesired operation.

EMCEN 61000-6-2 : 2005

EN 61000-6-4: 2007 +A1

EN 61326-1: 2013

EN 61326-2-3: 2013

EMC Directive 2014/30/EU

Electrical SafetyEN 61010-1: 2010

LV Directive 2014/35/EU

ATEX EN 60079-0: 2012/A11:2013

EN 60079-11: 2012

EN60079-15: 2010

EN60079-7: 2015

ATEX Directive 2014/34/EU

RoHSRoHS Directive 2011/65/EU

Hazardous Area Approvals

For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide (108M1756) available from Bently.com.

CSA/NRTL/CClass I, Division 2/ Zone 2 AEx nA nC [ic] IIC T4 Gc Class I, Division 2, Groups A, B, C, and D; T4

ATEX/IECEx2300/20

II 3 GEx na nC [ic] IIC T4 GcEx ec nC [ic] IIC T4 Gc T4 @ Ta = -30°C to +65°C

2300/25

II 3 GEx na nC ic [ic] IIC T4 GcEx ec nC ic [ic] IIC T4 Gc T4 @ Ta = -30°C to +65°C

7/24


http://www.bently.com/

Ordering Information

For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide (108M1756) available from Bently.com.

2300 Series Vibration Monitor

2300/20-AA: Monitor with 4-20 ma Outputs

(including DIN rail mount assembly, manual and monitor configuration software)

A: Approvals Option

00 None

02 Multiple Explosive Atmosphere Certifications(ATEX/IECEx/CSA)

2300/25-AA: Monitor with SPA Outputs

(including DIN rail mount assembly, manual and monitor configuration software)

A: Approvals Option

00 None

02 Multiple Explosive Atmosphere Certifications (ATEX/IECEx/CSA)

2300/20 KIT-AAA-BB

Bently Nevada 2300/20 Condition Monitoring System Kit

A: Configuration

001 2 Sensors and 1 Housing

l 1 - 2300/20 Monitor l 1 - 6 ft. (1.8 m) shielded Ethernet cable l 1 - Housing Kit: 105M6193-01

(fiberglass housing for nonhazardous area) or 105M6193-03 (stainless steel housing for hazardous area) 18.03 x 15.04 x 6.3 in.

l 2 - Accelerometer sensors (200350)

l 2 - 17 ft. (5.2 m) cables (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

002 1 Sensor and 1 Housing

l 1 - 2300/20 or 2300/25 Monitor l 1 - 6 ft. (1.8 m) shielded Ethernet cable l 1 - Housing Kit: 105M6193-01


l 1 - Accelerometer sensor (200350) l 1 - 17 ft. (5.2 m) cable (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

003 2 Sensors

l 1 - 2300/20 Monitor l 1 - 6 ft. (1.8 m) shielded Ethernet cable l 2 - Accelerometer sensors (200350) l 2 - 12 ft. (3.6 m) cables (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

004 2 Velomitors and 1 Housing



l 2 - Velomitor sensors (330500) l 2 - 17 ft. (5.2 m) cable (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

005 1 Velomitor and 1 Housing



l 1 - Velomitor sensor (330500) l 1 - 17 ft. (5.2 m) cable (9571)

8/24



l (Excluding Keyphasor sensor and 24 Vdc power supply1)

006 2 Velomitors

l 1 - 2300/20 Monitor l 1 - 6 ft. (1.8 m) shielded Ethernet cable l 2 - Velomitor sensors (330500) l 2 - 12 ft. (3.6 m) cable (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

B: Approvals Options

00 None

02 Multiple Explosive Atmosphere Certifications (ATEX/IECEx/CSA

1 Three kinds of power supplies provide different temperature and power ranges. Verify the necessary details in the Accessories section to follow.

2300/25 KIT-AAA-BB

Bently Nevada 2300/25 Condition Monitoring System Kit

A: Configuration

001 2 Sensors and 1 Housing

l 1 - 2300/25 Monitor l 1 - 6 ft. (1.8 m) shielded Ethernet

cable l 1 - Housing Kit: 105M6193-01


l 2 - Accelerometer sensors (200350) l 2 - 17 ft. (5.2 m) cables (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply 1)

002 1 Sensor and 1 Housing


cable

l 1 - Housing Kit: 105M6193-01 (fiberglass housing for nonhazardous area) or 105M6193-03 (stainless steel housing for hazardous area) 18.03 x 15.04 x 6.3 in.

l 1 - Accelerometer sensor (200350) l 1 - 17 ft. (5.2 m) cable (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

003 2 Sensors


cable l 2 - Accelerometer sensors (200350) l 2 - 12 ft. (3.6 m) cables (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

004 2 Velomitors and 1 Housing




l 2 - Velomitor sensors (330500) l 2 - 17 ft. (5.2 m) cable (9571) l (Excluding Keyphasor sensor and

24VDC power supply1)

005 1 Velomitor and 1 Housing




l 1 - Velomitor sensor (330500) l 1 - 17 ft. (5.2 m) cable (9571) l (Excluding Keyphasor sensor and 24

Vdc power supply1)

9/24


006 2 Velomitors


cable l 2 - Velomitor sensors (330500) l 2 - 12 ft. (3.6 m) cable (9571) l (Excluding Keyphasor sensor and

24VDC power supply1)

B: Approvals Option

00 None

02 Multiple Explosive Atmosphere Certifications (ATEX/IECEx/CSA

1 Three kinds of power supplies provide different temperature and power ranges. Verify the necessary details in the Accessories section to follow.

System 1 Software 2300/20 can interface to System 1 V16.2 or higher for expanded condition monitoring and analysis. System 1 software and the 2300 device connectivity (P/N 3071/13) are sold separately. Refer to document 108M5214 for System 1 detailed information.

3071/13-AA-BB

System 1 2300 Series Device Import

A: Not available for 2300 monitor

00

B: Quantity of 2300 Monitoring Systems

## Numeric [1->n]

10/24


Accessories

106M7607-01 Power supply for DIN rail mounting, 100/240AC to 24DC/1.5ACertifications (ATEX) (-25°C ~70°C, 35 x 99 x 95 mm) (One power can drive max 4 monitors)

110M7102-01 Power supply for DIN rail mounting, 100/240 AC to 24 DC/1.3 A Certifications (CID2 by UL) (-25°C ~70°C, 22.5 x 99 x 107 mm) (One power can drive max 4 monitors.)

106M6694-01 Power supply for DIN rail mounting, 110/220AC to 24VDC/5ACertifications (ATEX, IECEx, CID2 by UL) (-40°C ~70°C, 40 x 130 x 12 mm) (One power can drive max 10 monitors.)

105M6193-01 Fiberglass NEMA 4X/IP66 weatherproof housing with window in door (includes mounting plate for monitor)

105M6193-02 Stainless Steel Housing for 2300 KIT (can only be used in non-hazardous area)

105M6193-03 Stainless Steel Housing for 2300 KIT (can be used in hazardous area)

Proximity Transducer System Refer to the following proximity transducer system datasheets for details.

172036 3300 5mm

141194 3300 XL 8mm

146256 3300 XL 11mm

147385 3300 XL NSV

02120015 Bulk Cable from Proximity sensor to monitor (500 ft.)

9571-AA2 Low cost cable for accelerometer

A: From “02” to “99” Increments of 1.0 foot

84661-AA2 Armored cable for 2 -wire transducer

A: From “03” to “99” Increments of 1.0 foot

CB2W100-AAA

Cable for 2-wire transducer

The CB2W100 cable is not recommended for use with the 200350 Accelerometer. The O-ring will not form a proper seal with the accelerometer.

A: Cable Length

11/24


015 15 ft. (4.8 m)

032 32 ft. (9.8 m)

064 64 ft. (19.5 m)

112 112 ft. (34.1 m)

125 125 ft. (38.1 m)

150 150 ft. (45.7 m)

200 200 ft. (61.0 m)

250 250 ft. (76.2 m)

2 Cable lengths greater than 30 meters (100 feet) will experience some attenuation of amplitudes at higher frequencies when using the AM3100T2-Z2 Accelerometer.

Splash Proof Cable for 2-wire transducer

9571 Mod : 285031-AA2

Cable for 2-wire extension with Splash Proof Connection. This cable assembly provides an equivalent IP66 level of protection.

A: Cable Lengths

16 16 ft. (4.8 m)

32 32 ft. (9.8 m)

64 64 ft. (19.5 m)

For conducted RF performance, metal conduit with both ends grounded is required for Proximitor 3300-NSV cables and Accelerometer 330400 cable.


286244 Magnetic mounting base ¼-28 threaded hole

Ethernet Cables

138131-AAA

Standard 10 Base-T/100 Base-TX Shielded Category 5 Cable with RJ-45 connectors (solid conductor)

A: Cable Length

006 6 ft. (1.8 m)

010 0 10 ft. (3.0 m)

025 25 ft. (7.6 m)

040 40 ft. (12.2 m)

050 50 ft. (15.2 m)

075 75 ft. (22.9 m)

085 85 ft. (25.9 m)

100 100 ft. (30.5 m)

Spares

105M6203-01

35mm DIN rail mount and screws (included with 2300/20 monitor)

106M3210 10-pin 4-20mA output connector

106M2223 5-pin contact input connector (Alarm Reset)

106M3408 5-pin contact input connector (Alarm Inhibit, Config lock)

106M3211 16-pin transducer input connector

106M3212 6-pin relay output connector

106M2231 3-pin power input connector

12/24


Accessories

02120015 Bulk Cable from Proximity sensor to monitor (500 ft.)

9571-AA2 Low cost cable for 2-wire transducer


Software

100M9465-01 BN Monitor Configuration SW/FW DVD

l BNMC version 5.2 or greater

l 2300 series monitor firmware

l (DVD includes 2300 Series Software Guide)

Additional Information2300 Series Operation and Maintenance Manual (Document 105M0341)

2300 Field Wiring Diagram (Document 106M5801)

2300 Series Software Guide (Document 107M7626)

2300 Series Monitor Installation Guide (Document 121M3029)

13/24


Graphs and Figures

Figure 1: 105M6193-03 Weatherproof Housing


14/24

Figure 2: 105M6193-01 Weatherproof Housing


15/24

Figure 3: 200350 Accelerometer Sensor


16/24

Figure 4: AM3100T2-Z2 Accelerometer Sensor

Figure 5: 330400/330425 Accelerometer Sensor


17/24

Figure 6: 330500 Velomitor



18/24




19/24

Figure 10: 100M0741 Proximity Switch

Figure 11: 284947 Magnetic Pickup


20/24

Figure 12: 2300 Series Monitor Recommended Clearance


21/24

Wiring Diagram

Figure 13: 2300/20 Wiring Diagram

2300/20 and 2300/25 use the same interface connector for recorder output or SPA output.


22/24

Figure 14: 2300/25 Wiring Diagram

2300/20 and 2300/25 use the same interface connector for recorder output or SPA output.


23/24

Copyright 2021 Baker Hughes Company. All rights reserved.

Bently Nevada, Adapt, Keyphasor, Proximitor, System 1, Trendmaster, Velomitor and Orbit Logo are registered trademarks of Bently Nevada, a Baker Hughes Business, in the United States and other countries. The Baker Hughes logo is a trademark of Baker Hughes Company. All other product and company names are trademarks of their respective holders. Use of the trademarks does not imply any affiliation with or endorsement by the respective holders.

Baker Hughes provides this information on an “as is” basis for general information purposes. Baker Hughes does not make any representation as to the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect, consequential or special damages, claims for lost profits, or third party claims arising from the use of the information, whether a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Contact your Baker Hughes representative for the most current information.

The information contained in this document is the property of Baker Hughes and its affiliates; and is subject to change without prior notice. It is being supplied as a service to our customers and may not be altered or its content repackaged without the express written consent of Baker Hughes. This product or associated products may be covered by one or more patents. See Bently.com/legal.

1631 Bently Parkway South, Minden, Nevada USA 89423 Phone: 1.775.782.3611 (US) or Bently.com/support

Bently.com


24/24

http://www.bently.com/legal

http://www.bently.com/Support


2300 series vibration monitors datasheet - 105m0340 · for relay contacts. the 2300/20 monitor...

Documents