2015inoxidables.com/pressfitting/catalogos/instalpress2015.pdf2015 pressfitting and piping...

2015

PRESSFITT ING AND P IP ING

Pressfitting systems for heating, sanitary and industrial applicationsPressfittingssysteme für Heizung-, Sanitär- und Industriebereiche

Raccords à sertir pour applications sanitaires, industrielles et de chauffage

ÍNDEXINDEX · INHALT · INDEX

Technical informat ion · Technische Daten · Informat ion Techniques

Cert i f icates · Zert i f ikate · Cert i f icats

Instalpress pressf i t t ings · Instalpress pressf i t t ings (AIS I-316L / 1 .4404) · Instalpress raccords à sert i r

Instalpress Steel Z inc P lated Pressf i t t ings · Instalpress pressf i t t ings C-Stahl · Raccords à sert i r

F i repress pressf i t t ings · F i repress pressf i t t ings · F i repress raccords à sert i r

Capi l lary f i t t ings · Lötf i t t ings · Accessoires capi l la i res

Fi l tube pipe clamps · F i l tube-Rohrschel len · Col l iers F i l tube

Other p ipe clamps · Weitere Rohrschel len · D ’autres col l iers

Threaded f i t t ings · Gewindef i t t ings · Accessoires f i letés

04

09

11

25

35

39

43

45

49

TECHNICAL INFORMATION

INSTALPRESS, PRESSFITT ING SySTEM TECHNOLOGyThe press technique was developed in Scandinavia more than 50 years ago. For the last 40 years, stainless steel press systems have been used for domestic purposes in the Central European market. The lnstalpress, Pressfitting System includes system press accessories, system tubes and system O-rings. This fast, simple and safe joint is a technical and economic alternative compared with glued, threaded or welded joints. Critical factors for guaranteeing the joint’s mechanical resistance are the pressing and the depth of insertion of the tubes inside the press accessory.

An EPDM elastomer with contour is used to seal the joint. The press joint, which according to DVGW W 534 is indissoluble, of a lasting seal, is a joint by shape and longitudinal force, inseparable, which is achieved by cold-shaping of the press accessories and the tube. The joint is created using the press tool. The contour formed in the pressing process has two levels:

The first level, the sealing, is achieved by compressing the elastomer.

On the second level, in order to achieve the mechanical resistance necessary for this joint, the press accessories and the tube are cold-moulded in the second level.

FEATuRES AND bENEFITS OF THE INSTALPRESS, PRESSFITT ING SySTEM Max. Pressure Service: 16 bar. Safety Factor: 4 (Accreditation tests at 64 bar)Fluid temperature: -10 °C to + 110 °C. (EPDM joint)Oil temperature: -30 °C to + 180 °C. (FKM/FPM/Viton joint)

FAST Approximately 20-45% lower personnel costs, in terms of labour, compared with conventional joint systems.

CLEAN Ideal for plumbing in inhabited premises. (Rehabilitation and repairs).

SAFE There is no fire hazard as is the case with welding.

ECONOMICAL Working with highly qualified personnel is not required, (welders, accredited workers, etc.)Consumable materials such as gas and oxygen are not required; no need for renting bottles.

SIMPLE It is a very simple process, easy to learn, and does not require extensive prior experience.There is a lower risk of making errors than with other conventional joint systems.

UNIVERSAL Wall or embedded installation possible. (Quality finishes).

HYGIENIC The EPDM O-ring complies with -W270 requirements with respect to microbiological security. (E.g. LEGIONELLA).

RECYCLABLE It is a 100% recyclable system and therefore compatible with any environmental legislation.

EFFICIENT The possibility of working with reduced thicknesses enables the flows in the tubes to be increased notably.


STAINLESS STEEL INSTALPRESS SySTEM The tube of the Stainless Steel Instalpress System is a fine wall tube welded lengthwise. The tube is made from light alloy Cr-Ni-Mo steel, austenitic, stainless, with material No. 1.4404 (AISI 316 L) according to EN 10088. The tubes comply with EN10312, EN 10217 as well as DVGW GW 541 requirements. The internal and external surfaces are pure metal, they are therefore free from tempering colours, are shiny and also free from corrosive and hygienically toxic substances. All the system’s tubes are tested and certified by DVGW. The series 1 tubes are supplied in 5 meters bars. The series 2 (DVGW) tubes are supplied in 6 meters bars.

The system’s accessories are made from light alloy Cr-Ni-Mo steel, austenitic, stainless, with material No. 1.4404 (AISI 316 L) according to EN 10088. The diameters of these accessories are manufactured in compliance with the EN 10312 and DVGW GW 541 specifications and supplied with EPDM O-rings, assembled.

CARbON STEEL INSTALPRESS SySTEMThe Carbon Steel Instalpress system’s tube is an E-220 non-alloy steel precision tube with material No. 1.0038, fine wall and welded lengthwise as stated in the DIN EN 10305-3 standard. The non-alloy steel is characterised by its high grade of purity and low carbon content. The tube is galvanized on the outside (heating) or inside/outside (PCI) and the welding is polished in order to guarantee a perfectly sealed surface. The Carbon Steel Instalpress tubes are supplied in 6 meters bars, EN 10217 as well as DVGW GW 541. The internal and external surfaces are pure metal, they are therefore free from tempering colours, are shiny and also free from corrosive and hygienically toxic substances. All the system’s tubes are tested and certified by DVGW. The series 1 tubes are supplied in 5 meters bars. The series 2 (DVGW) tubes are supplied in 6 meters bars.

The Carbon Steel Instalpress accessories are made from E-235 +N non-alloy steel, material No. 1.0308 according to DIN EN 10305-2 and supplied in 12 mm to 108 mm dimensions. The galvanized zinc layer protects the accessory from external corrosion. The accessories are permanently marked with the manufacturer’s logo and the inscription “Zinc Plated”. The Carbon Steel Instalpress accessories are supplied with EPDM O-rings.

The measures

provided in the

standard and

marketed by Filtube

are the following:

EN 10312SERIES 1

SERIES 2 (DVGW)

Nominal

diameter

Outer diameter, mm

Max Min

Theoretic thickness

according to EN10312 Standard

Linear mass:

Kg/m

Theoretic thickness

according to DVGW GW-541

Linear mass:

Kg/m

10 10,045 9,940 0,6 0,141 – –

12 12,045 11,940 0,6 0,171 – –

15 15,045 14,940 0,6 0,216 1 0,351

18 18,045 17,940 0,7 0,303 1 0,426

22 22,055 21,950 0,7 0,373 1,2 0,625

28 28,055 27,950 0,8 0,545 1,2 0,805

35 35,070 34,965 1,0 0,851 1,5 1,258

42 42,070 41,965 1,2 1,230 1,5 1,521

54 54,070 53,840 1,2 1,470 1,5 1,972

76,1 76,300 73,540 2,0 3,711 2,0 3,711

88,9 88,120 88,230 2,0 4,352 2,0 4,352

108 108,250 107,170 2,0 5,328 2,0 5,328

Nominal diameter, ND d x s, mm di, mm Longitudinal mass, kg/m Water content, l/m

10 12x1,2 9,6 0,338 0,079

12 15x1,2 12,6 0,408 0,125

15 18x1,2 15,6 0,497 0,191

20 22x1,2 19,6 0,824 0,302

25 28x1,5 25,0 1,052 0,491

32 35x1,5 32,0 1,320 0,804

40 42x1,5 39,0 1,620 1,194

50 54x1,5 51,0 2,098 2,042

65 76,1x2,0 72,1 3,652 4,080

80 88,9x2,0 84,9 4,290 5,660

100 108x2,0 104,0 5,230 8,490


O-RINGS TyPES AND SPECIF ICATIONS

EPDM, black Temp.: -10 °C - +110 °C (120 °C) - Diameter: 12 - 108 mm

Applications:

- Drinking water

- Heating installations

- Circulation pipes

- Fire fighting protection systems

FPM (DIN ISO 1629) / FKM (ASTM D1418), green Temp.: -30 °C - +180 °C (230 °C) - Diameter: 15 - 108 mm

Applications:

- Air pressure systems

- Mineral, vegetable and synthetic oils.

- Solar power installations

Joint ring, FKM, red Temp.: -10 °C - +110 °C - Diameter: 15 - 108 mm

Applications:

- Liquid gases (GLP)

- Grease and industrial applications (A III risk)

- Hydrocarbons (diesel)

- Air pressure systems

INOX STEEL

DRINKING WATER Suitable Not suitable

EXTRA-PURE WATER (conductivity, < 0.1 mS/cm) Suitable Not suitable

RAINWATER Suitable Not suitable

NAVAL SECTOR (OFFSHORE) Suitable Not suitable

HEATING AND AIR CONDITIONING Suitable (open circuit) Suitable (closed circuit)

SOLAR FPM suitable (green) FPM suitable (green)

GAS Not suitable Not suitable

FUEL (diesel) FKM suitable (red) FKM suitable (red)

COMPRESSED AIR (1-4 ISO 8573-1/2001) Suitable up to Class 4 Suitable up to Class 4

COMPRESSED AIR (5 ISO 8573-1/2001) FPM suitable (green) FPM suitable (green)

CONDENSED STEAM Suitable Not suitable

INDUSTRY On request (please ask) On request (please ask)

PCI (BIAS / SPRAYER) Suitable Suitable


STAINLESS STEEL INSTALPRESS SySTEM SPECIAL APPLICATIONS The STAINLESS STEEL Instalpress, Pressfitting System with DVGW stainless steel tubes in its AISI-316L variant, fitted with EPDM TIMO-70 joints, is perfectly compatible with:

• The chemicals disinfection treatments established by regulation according to RD 865/2003.

• Suitable for all treated water installations, from partially desalinated (decalcified) through to totally desalinated (also deionised, demineralised and distilled) and including extra-pure water with < 0.1 mS/cm conductivity.

• Does not contaminate drinking water with heavy metals and does not cause nickel allergy. The values are clearly maintained below the limits for nickel migration (according to the 98/83/CE Directive: <0.02 mg/l nickel). The hygiene accreditations and controls of the joints for STAINLESS STEEL Instalpress, Pressfitting System also include the EPDM groove and joint, which comply with recommendations related to plastic materials in drinking water installations (KTW recommendations) and have passed hygiene control in accordance with the DVGW W270 instruction sheet.

• Bacteriological disinfection (ANTI-LEGIONELLA TREATMENTS). Must be carried out according to the DVGW W291 work sheet “Disinfection in water distribution systems”, with hydrogen peroxide (H202).

• In the case of chlorine disinfections, the concentration and exposure times according to the following table must be respected:

CARbON STEEL INSTALPRESS SySTEM SPECIAL APPLICATIONS The Carbon Steel Instalpress, Pressfitting System (E-220) is compliant in accordance with Decision No. 1537-175-1564 dated 25 August 2010, corresponding to Avis Technique No. 14/10-1564, from the CSTB Hydraulic and Sanitary Equipment Services, with the requirements of distribution and channelling systems and carbon steel fittings for closed refrigeration, heating and air conditioning circuits.

Note #1: The galvanized may also have two sides (internal/external) given that, since it is less noble zinc than iron and generates stable oxide, protecting the iron against oxidation. However, this type of material can only be used in water conduction tubes whose temperature does not surpass 50 °C given that the zinc’s polarity is reversed with respect to the steel of the tube and corrodes.

Note #2: The accessories have exterior surface finishing according to standard of 8 μ to 15 μm, while the surface finishing on the inside is a minimum of 2 μ, and practically null on contact with the fluid due to the tube insertions in the housing in the accessory intakes. This finish completely stops any possibility of corrosion due to polarity inversion.

Note #3: Mixed installations can be made in closed cooling or heating circuits (stainless, carbon steel, even copper), in any order and with no restrictions, with no risk of galvanic corrosion on contact. For open circuits, the carbon steel cannot be joined directly to the stainless steel, non-ferrous accessories must be installed, which act as distance separators (bronze, copper, brass). In open galvanized steel and copper circuits, the rule of flow must be observed: The copper seen in the direction of flow must always be installed after the galvanized steel components.

Chlorine concentration (Cl-free) 50 mg/l. 100 mg/l.

Maximum exposure time Maximum 24 h. Maximum 16 h.


INSTALPRESS, PRESSFITT ING SySTEM PRESSING The Instalpress System pressing is carried out with pressing machines currently used in the market. However, the use of press loops is recommended for diameters of 42 up to 108.

In the case of the Carbon Steel Instalpress System, “M” profile clamps are always used.

Novopress RemsKlauke Rothemberger

INSTALPRESS SySTEM ASSEMbLy

Cutting the tube

Insert accessory

Open position clamp

Remove burrs

Mark pressed

Make the presses

Check the existence of the joint

Install ND clamp

Visually check the joint

PRESSING PROCESS

CERTIF ICATES · ZERTIF IKATE · CERTIF ICATS

CERTIF ICATES · ZERTIF IKATE · CERTIF ICATS

STAINLESS STEEL A-316 L - EDELSTAHL 1.4404

CARBON STEEL - C-STAHL

STAINLESS STEEL A-316 L - EDELSTAHL 1.4404**








** Certificate in process

** FM APPROVALSTAINLESS STEEL A-316 L - EDELSTAHL 1.4404





inox

[email protected] // www.instalpress.com

Stainless steel 316L pressfittings for thinwalled stainless steel pipesPressfittings aus Edelstahl 1.4404 für dünnwandige Edelstahlrohre

Raccords à sertir en acier inoxydable 316L

Technical Data / Technische Daten / Données Techniques

Pressure / Druck Max 16 bar

Temperature / Temperatur -10 ºC <> +110 ºC

Dimensions / Durchmesser (mm) 15 / 18 / 22 / 28 / 35 / 42 / 54 / 76 / 88,9 / 108

Pressprofile / Presskontur M

1 ● Stainless Steel Tubes - Edelstahlrohre

12

Sanitary p ipe / Sanitär-Rohr EN-10312 (Edelstahl 1 .4404) / Tube Sanita ire (AIS I-316L)

Ø Standard Ref. Polished Ref. / Poliert Art. NR (+/-) Kg/m €/m

10x0,6 10410X06 104P10X06 0,141 *

12x0,6 10412X06 104P12X06 0,171 *

15x0,6 10415X06 104P15X06 0,216 *

18x0,7 10418X07 104P18X07 0,303 *

22x0,7 10422X07 104P22X07 0,373 *

28x0,8 10428X08 104P28X08 0,545 *

35x1,0 10435X10 104P35X10 0,851 *

42x1,2 10442X12 104P42X12 1,226 *

54x1,2 10454X12 104P54X12 1,587 *

Standard length / Standardlänge / Standard lengte: 5m

Sanitary pipe DVGW / Sanitär-Rohr DVGW (Edelstahl 1.4404) / Tube Sanitaire DVGW (AISI-316L)


15X1,0 12415X10 124P15X10 0,351 *

18X1,0 12418X10 124P18X10 0,426 *

22X1,2 12422X12 124P22X12 0,625 *

28X1,2 12428X12 124P28X12 0,805 *

35X1,5 12435X15 124P35X15 1,258 *

42X1,5 12442X15 124P42X15 1,521 *

54X1,5 12454X15 124P54X15 1,972 *

76,1X2,0 124761X20 124P761X20 3,711 *

88,9X2,0 124889X20 124P889X20 4,352 *

108x2,0 124108X20 124P108X20 5,308 *


Sanitary p ipe / Sanitär-Rohr EN-10312 (Edelstahl 1 .4301) / Tube Sanita ire (AIS I-304)


10x0,6 10210X06 102P10X06 0,141 *

12x0,6 10212X06 102P12X06 0,171 *

15x0,6 10215X06 102P15X06 0,216 *

18x0,7 10218X07 102P18X07 0,303 *

22x0,7 10222X07 102P22X07 0,373 *

28x0,8 10228X08 102P28X08 0,545 *

35x1,0 10235X10 102P35X10 0,851 *

42x1,2 10242X12 102P42X12 1,226 *

54x1,2 10254X12 102P54X12 1,587 *

76,1x2,0 122761X20 122P761X20 3,711 *

88,9x2,0 122889X20 122P889X20 4,352 *

108x2,0 122108X20 122P108X20 5,308 *


1 ● Instalpress Pressfittings (Stainless Steel AISI-316L) - Profile M

13

bend 90º press x press / bogen 90º I I / Coude 90º FF

Art. nr Ø A Euro / St27C90HH15 15x15 47 25 100 3,6827C90HH18 18x18 55 25 50 4,1227C90HH22 22x22 62 15 45 4,62

27C90HHRC28 28x28 65 5 25 5,5727C90HHRC35 35x35 75 5 10 8,9326C90HHRC42 42x42 94 5 25 14,1226C90HHRC54 54x54 108 3 12 19,3026C90HHRC76 76,1x76,1 162 1 1 51,90

26C90HH88 88,9x88,9 219 1 1 67,0926C90HH108 108x108 266 1 1 90,8926C90HH114 114,3x114,3 - 1 - Consult us26C90HH139 139,7 x 139,7 - 1 - Consult us26C90HH168 168,3 x 168,3 - 1 - Consult us

bend 90º Ø x press / bogen 90º IA / Coude 90º FM

Art. nr Ø A B Euro / St27C90HM15 15x15 47 55 25 100 4,0927C90HM18 18x18 55 62 25 50 4,2727C90HM22 22x22 62 68 15 45 4,80

27C90HMRC28 28x28 65 73 5 25 6,4327C90HMRC35 35x35 75 80 5 10 9,5226C90HMRC42 42x42 93 103 5 25 13,1026C90HMRC54 54x54 105 120 3 12 18,7926C90HMRC76 76,1x76,1 165 183 1 1 44,4026C90HM88 88,9x88,9 222 240 1 1 59,1226C90HM108 108x108 268 290 1 1 85,47


Art. nr Ø A Euro / St27C45HH15 15x15 36 25 150 3,6127C45HH18 18x18 37 25 100 3,9927C45HH22 22x22 39 25 100 4,7627C45HH28 28x28 49 10 30 5,9827C45HH35 35x35 56 10 20 8,4926C45HH42 42x42 72 10 40 13,2526C45HH54 54x54 85 5 20 17,4926C45HH76 76,1x76,1 138 1 1 52,4526C45HH88 88,9x88,9 154 1 1 62,0026C45HH108 108x108 165 1 1 81,2326C45HH114 114,3x114,3 - 1 - Consult us26C45HH139 139,7x139,7 - 1 - Consult us26C45HH168 168,3x168,3 - 1 - Consult us


Art. nr Ø A B Euro / St27C45HM15 15x15 33 47 25 150 3,9527C45HM18 18x18 35 48 25 100 4,2327C45HM22 22x22 37 48 25 100 4,4527C45HM28 28x28 47 50 10 30 6,3427C45HM35 35x35 55 63 10 20 8,5026C45HM42 42x42 72 80 10 40 13,1026C45HM54 54x54 85 106 5 20 16,9826C45HM76 76,1x76,1 138 140 1 1 45,7026C45HM88 88,9x88,9 154 165 1 1 59,9526C45HM108 108x108 165 190 1 1 78,73


14

Straight Coupling press x press / Muffe II / Manchon FF

Art. nr Ø A Euro / St

27M15 15x15 49 25 150 2,27

27M18 18x18 49 25 100 2,54

27M22 22x22 54 25 75 2,94

27M28 28x28 56 10 40 3,69

27M35 35x35 64 10 20 5,08

26M42 42x42 82 10 60 6,95

26M54 54x54 90 5 40 8,90

26M76 76,1x76,1 148 1 1 30,49

26M88 88,9x88,9 170 1 1 34,26

26M108 108x108 197 1 1 51,01

26M114 114,3x114,3 - - 1 Consult us

26M139 139,7x139,7 - - 1 Consult us

26M168 168,3x168,3 - - 1 Consult us

T - coupl ing 3 x press / T - Stück / Té égal Femel le

Art. nr Ø A B Euro / St

27TW15 15 65 39 25 50 6,75

27TW18 18 69 43 15 60 7,03

27TW22 22 76 45 15 30 7,43

27TW28 28 85 50 5 20 9,44

27TW35 35 102 58 5 10 12,21

26TW42 42 117 64 5 30 15,91

26TW54 54 146 74 3 18 20,84

26TW76 76,1 235 115 1 1 76,23

26TW88 88,9 260 127 1 1 82,41

26TW108 108 310 160 1 1 107,55

26TW114 114,3 - - - 1 Consult us

26TW139 139,7 - - - 1 Consult us

26TW168 168,3 - - - 1 Consult us

Sleeve Coupling press x press / Schiebemuffe II / Manchon coulissant FF

Art. nr Ø A Euro / St

27MST15 15x15 85 10 150 3,99

27MST18 18x18 82 15 100 4,35

27MST22 22x22 84 15 75 6,13

27MST28 28x28 92 10 40 7,63

27MST35 35x35 104 10 20 9,03

26MST42 42x42 121 10 60 10,06

26MST54 54x54 142 5 40 14,88

26MST76 76,1x76,1 230 1 1 74,65

26MST88 88,9x88,9 260 1 1 84,34

26MST108 108x108 310 1 1 92,56

T - coupl ing 3 x press / T - Stück / Té égal Femel le

Art. nr Ø A B C Euro / St

27T15 15 20 68 32 25 50 6,75

27T18 18 20 74 33 15 60 7,03

27T22 22 21 80 40 15 30 7,43

27T28 28 23 90 42 5 20 9,44

27T35 35 26 94 50 5 10 12,21

26T42 42 30 116 54 5 30 15,91

AB

C

ONE P IECE PART / E INTEIL IG / MONObLOC

WELDED / GESCHWEIßT / SOuDÉ


15

Flange with press-joint / Flansch mit Pressmuffe / bride à bout lisse

Art. nr Ø A B Euro / St

27BA15 15 95 40 1 2 32,41

27BA18 18 95 43 1 2 36,21

27BA22 22 105 47 1 2 40,55

27BA28 28 115 50 1 2 54,18

27BA35 35 140 54 1 2 72,08

26BA42 42 150 59 1 1 64,39

26BA54 54 165 62 1 1 84,98

26BA76 76,1 185 102 1 1 93,05

26BA88 88,9 200 97 1 1 113,34

26BA108 108 220 122 1 1 142,32

26BA114 114,3 - - - 1 Consult us

26BA139 139,7 - - - 1 Consult us

26BA168 168,3 - - - 1 Consult us

Straight coupling reduction Ø x press / Reduziermuffe IA / Réduction MF

Art. nr Ø A d1 d2 Euro / St

27RE18X15 18x15 58 Ø18 15 25 150 3,37

27RE22X15 22x15 59 Ø22 15 25 100 4,04

27RE22X18 22x18 55 Ø22 18 10 100 4,14

27RE28X15 28x15 64 Ø28 15 10 70 5,03

27RE28X18 28x18 65 Ø28 18 10 70 5,25

27RE28X22 28x22 57 Ø28 22 10 50 4,90

27RE35X15 35x15 71 Ø35 15 10 13,94

27RE35X18 35x18 Ø35 18 10 13,34

27RE35X22 35x22 74 Ø35 22 10 40 6,12

27RE35X28 35x28 68 Ø35 28 10 40 6,07

27RE42X15 42x15 Ø42 15 10 20,95

27RE42X18 42x18 Ø42 18 10 14,39

27RE42X22 42x22 84 Ø42 22 10 70 8,52

27RE42X28 42x28 84 Ø42 28 10 70 8,66

27RE42X35 42x35 87 Ø42 35 10 70 8,33

27RE54X15 54x15 Ø54 15 10 50 19,56

27RE54X18 54x18 Ø54 18 10 50 15,85

27RE54X22 54x22 Ø54 22 10 50 11,66

27RE54X28 54x28 94 Ø54 28 10 50 11,93

27RE54X35 54x35 93 Ø54 35 10 50 12,42

26RE54X42 54x42 97 Ø54 42 10 40 10,85

26RE76X42 54x42 Ø54 17,20

26RE76X54 76,1x54 150 Ø76,1 54 1 1 44,55

26RE88X54 88,9x54 166 Ø88,9 54 1 1 30,79

26RE88X76 88,9x76,1 163 Ø88,9 76,1 1 1 34,49

26RE108X54 108x54 Ø108 54 1 1 44,87

26RE108X76 108x76,1 203 Ø108 76,1 1 1 45,51

26RE108X88 108x88,9 205 Ø108 88,9 1 1 50,20

26RE114,3X88,9 114,3x88,9 Ø114,3 Consult us

26RE114,3X76,1 114,3x76,1 Ø114,3 Consult us

26RE139,7X114,3 139,7x114,3 Ø139,7 Consult us

26RE139,7X108 139,7x108 Ø139,7 Consult us

26RE139,7X88,9 139,7x88,9 Ø139,7 Consult us

26RE168,3X139,7 168,3x139,7 Ø168,3 Consult us

26RE168,3X114,3 168,3x114,3 Ø168,3 Consult us

26RE168,3X108 168,3x108 Ø168,3 Consult us

26RE168,3X88,9 168,3x88,9 Ø168,3 Consult us


16

T - coupling reduction 3 x press / T - Stück reduziert / Té réduit

Art. nr Ø A B Euro / St27TR18X15 18x15x18 70 38 15 60 7,0227TR22X15 22x15x22 76 44 15 30 7,4227TR22X18 22x18x22 76 46 15 30 7,6727TR28X15 28x15x28 83 43 5 25 8,4327TR28X18 28x18x28 85 49 5 25 9,0727TR28X22 28x22x28 85 49 5 25 8,9927TR35X15 35x15x35 101 50 5 10 10,5827TR35X18 35x18x35 101 51 5 10 10,6427TR35X22 35x22x35 101 53 5 10 10,7527TR35X28 35x28x35 101 55 5 10 11,7527TR42X22 42x22x42 117 54 5 40 14,3727TR42X28 42x28x42 117 58 5 40 14,2727TR42X35 42x35x42 117 64 5 40 15,9927TR54X22 54x22x54 145 62 5 20 19,0227TR54X28 54x28x54 145 63 4 20 19,4427TR54X35 54x35x54 145 70 4 20 21,4126TR54X42 54x42x54 145 70 4 16 19,8727TR76X22 76,1x22x76,1 230 77 1 1 58,3927TR76X28 76,1x28x76,1 230 77 1 1 59,4227TR76X35 76,1x35x76,1 230 86 1 1 60,8726TR76X42 76,1x42x76,1 230 82 1 1 62,1126TR76X54 76,1x54x76,1 230 85 1 1 63,95

T - coupling press x female x press / T - Stück IG / Té taraudé

Art. nr Ø A B Euro / St27TH15X12 15x1/2”x15 20 68 10 60 6,7427TH18X12 18x1/2”x18 20 74 10 50 9,2627TH18X34 18x3/4”x18 20 80 10 40 9,4927TH22X12 22x1/2”x22 21 80 10 30 10,2627TH22X34 22x3/4”x22 21 86 10 30 10,0127TH28X12 28x1/2”x28 23 90 10 20 11,4327TH28X34 28x3/4”x28 23 90 10 20 11,5827TH35X12 35x1/2”x35 26 90 5 10 14,6527TH35X34 35x3/4”x35 26 90 5 10 14,9826TH42X12 42x1/2”x42 30 116 5 30 17,1926TH42X34 42x3/4”x42 30 116 5 18 16,52

C

AB



Art. nr Ø A B Euro / St27THW15X12 15x1/2”x15 68 33 10 60 9,2627THW18X12 18x1/2”x18 69 35 10 50 9,4927THW18X34 18x3/4”x18 69 40 10 40 10,2627THW22X12 22x1/2”x22 75 33 10 30 8,9527THW22X34 22x3/4”x22 76 43 10 30 11,4327THW28X12 28x1/2”x28 85 37 10 20 11,0527THW28X34 28x3/4” x28 85 46 10 20 14,7727THW35X12 35x1/2” x35 102 40 5 10 14,6527THW35X34 35x3/4”x35 102 50 5 10 15,9626THW42X12 42x1/2”x42 116 44 5 30 16,5226THW42X34 42x3/4”x42 116 49 5 18 18,3126THW54X12 54x1/2”x54 146 48 3 18 19,8726THW54X34 54x3/4”x54 146 59 3 18 20,6126THW54X20 54x2”x54 146 85 3 18 35,1526THW76X34 76,1x3/4”x76,1 230 70 1 1 66,9726THW76X20 76,1x2”x76,1 230 98 1 1 71,6426THW88X34 88,9x3/4”x88,9 260 76 1 1 76,2126THW88X20 88,9x2”x88,9 260 100 1 1 80,8526THW108X34 108x3/4”x108 310 86 1 1 90,4326THW108X20 108x2”x108 310 112 1 1 97,41



17


Art. nr Ø A B Euro / St27TR88X22 88,9x22x88,9 260 77 1 1 67,1927TR88X28 88,9x28x88,9 260 83 1 1 69,1427TR88X35 88,9x35x88,9 260 88 1 1 70,8626TR88X42 88,9x42x88,9 260 88 1 1 73,1026TR88X54 88,9x54x88,9 260 88 1 1 74,9626TR88X76 88,9x76,1x88,9 260 117 1 1 80,5227TR108X22 108x22x108 310 88 1 1 85,8027TR108X28 108x28x108 310 90 1 1 89,3127TR108X35 108x35x108 310 98 1 1 90,2726TR108X42 108x42x108 310 95 1 1 92,0126TR108X54 108x54x108 310 105 1 1 96,8526TR108X76 108x76,1x108 310 126 1 1 109,9826TR108X88 108x88,9x108 310 136 1 1 114,97

26TR114,3X88,9 114,3x88,9x114,3 - - - - Consult us26TR114,3X76,1 114,3x76,1x114,3 - - - - Consult us26TR139,7X114,3 139,7x114,3x139,7 - - - - Consult us26TR139,7X108 139,7x108x139,7 - - - - Consult us26TR139,7X88,9 139,7x88,9x139,7 - - - - Consult us26TR139,7X76,1 139,7x76,1x139,7 - - - - Consult us26TR168,3X139,7 168,3x139,7x168,3 - - - - Consult us26TR168,3X114,3 168,3x114,3x168,3 - - - - Consult us26TR168,3X108 168,3x108x168,3 - - - - Consult us26TR168,3X88,9 168,3x88,9x168,3 - - - - Consult us26TR168,3X76,1 168,3x76,1x168,3 - - - - Consult us

Joint connector female x press / Übergangsmuffe IG – flachdichtend / Écrou Tournant joint plat

Art. nr Ø A Euro / St27RPJP15X12 1/2”x15 47 25 150 6,6427RPJP15X34 3/4”x15 54 15 90 8,5927RPJP18X12 1/2”x18 50 15 90 7,3027RPJP18X34 3/4”x18 56 10 80 8,8027RPJP22X34 3/4”x22 56 10 40 9,3327RPJP22X10 1”x22 56 15 45 10,4027RPJP28X10 1”x28 62 10 40 11,2727RPJP28X114 1 1/4”x28 65 10 20 11,2327RPJP35X114 1 1/4”x35 71 10 20 14,5526RPJP42X112 1 1/2”x42 67 10 20 16,2126RPJP42X20 2”x42 84 10 70 21,1426RPJP54X20 2”x54 96 5 30 25,9226RPJP54X212 2 1/2”x54 158 5 30 34,6626RPJP76X212 2 1/2”x76,1 138 1 1 55,76

Joint connector female x press / Übergangsmuffe IG / Écrou Tournant

Art. nr Ø A Euro / St27RP15X12 1/2”x15 25 150 6,6427RP15X34 3/4”x15 15 90 8,5927RP18X12 1/2”x18 15 90 7,3027RP18X34 3/4”x18 10 80 8,8027RP22X34 3/4”x22 10 40 9,3327RP22X10 1”x22 15 45 10,4027RP28X10 1”x28 10 40 11,2727RP28X114 1 1/4”x28 10 20 11,2327RP35X114 1 1/4”x35 10 20 14,5526RP42X112 1 1/2”x42 10 20 16,2126RP42X20 2”x42 10 70 21,1426RP54X20 2”x54 5 30 25,9226RP54X212 2 1/2”x54 5 30 34,6626RP76X212 2 1/2”x76,1 1 1 55,76


18

Straight adapter male x press / Übergang AG / Raccord fileté

Art. nr Ø A Euro / St27UMW15X12 1/2”x15 10 80 5,2827UMW15X34 3/4”x15 43 10 80 5,3227UMW15X38 3/8”x15 10 80 6,1127UMW18X12 1/2”x18 10 80 5,4227UMW18X34 3/4”x18 10 80 6,1927UMW22X12 1/2”x22 10 80 4,2027UMW22X34 3/4”x22 10 80 6,9727UMW22X10 1”x22 10 80 7,4227UMW28X34 3/4”x28 10 40 6,8827UMW28X10 1”x28 10 40 7,5927UMW28X114 1 1/4”x28 10 12,6427UMW35X10 1”x35 73 10 30 12,1427UMW35X114 1 1/4”x35 10 30 11,2527UMW35X112 1 1/2”x35 10 17,3026UMW42X114 1 1/4”x42 10 13,9426UMW42X112 1 1/2”x42 10 60 12,8826UMW54X112 1 1/2”x54 84 5 19,9226UMW54X20 2”x54 5 30 20,2626UMW76X212 2 1/2”X76,1 123 1 1 55,3926UMW88X30 3”X88,9 135 1 1 82,47


Art. nr Ø A Euro / St27UM15X12 1/2”x15 41 10 80 5,2827UM18X12 1/2”x18 42 10 80 5,4227UM18X34 3/4”x18 44 10 80 6,1927UM22X12 1/2”x22 42 10 80 4,1327UM22X34 3/4”x22 44 10 80 6,9727UM22X10 1”x22 46 10 80 7,4227UM28X34 3/4”x28 46 10 40 6,8827UM28X10 1”x28 48 10 40 8,6127UM35X114 1 1/4”x35 53 10 30 9,9226UM42X114 1 1/4”x42 71 10 13,9426UM42X112 1 1/2”x42 57 10 60 12,9426UM54X20 2”x54 71 5 30 20,26

A



Straight adapter female x press / Übergang IG / Raccord taraudé

Art. nr Ø A Euro / St27UH15X12 15X1/2" 37 10 100 5,8427UH15X34 15X3/4" 6,8327UH18X12 18X1/2" 37 10 100 5,6927UH18X34 18X3/4" 38 10 70 6,7027UH22X12 22X1/2" 36 10 40 4,7427UH22X34 22X3/4" 39 10 40 7,3927UH22X10 22X1" 42 10 40 8,6827UH28X34 28X3/4" 9,1427UH28X10 28X1" 44 10 40 9,1327UH28X114 28X1 1/4" 9,9827UH35X10 35X1" 12,4327UH35X114 35X1 1/4" 49 10 10 11,7927UH35X112 35X1 1/2" 19,9926UH42X114 42X1 1/4" 53 10 15,2926UH42X112 42X1 1/2" 16,7526UH54X112 54X1 1/2" 24,3326UH54X20 54X2" 24,1126UH76X212 76,1X2 1/2" 40,25

A


”


19

Elbow transition female x press / Winkel 90º IG / Coude taraudé

Art. nr Ø A B Euro / St27CH15X12 1/2”x15 42 37 15 75 4,9327CH18X12 1/2”x18 42 37 15 75 5,8027CH22X34 3/4”x22 46 42 15 45 5,6127CH28X10 1”x28 52 45 10 20 10,7127CH35X114 1 1/4”x35 60 45 10 10 16,11 B

A


Elbow transition male x press / Winkel 90º AG / Coude fi leté

Art. nr Ø A B Euro / St27CM15X12 1/2”x15 42 37 15 75 5,2527CM18X12 1/2”x18 44 37 15 75 6,4527CM22X34 3/4”x22 46 46 10 45 7,9427CM28X10 1”x28 52 46 10 20 10,9627CM35X114 1 1/4”x35 60 54 10 10 18,0926CM42X112 1 1/2”x42 66 54 10 40 20,9226CM54X20 2”x54 75 63 5 20 30,09

A

B



Art. nr Ø A B Euro / St27CHW15X12 1/2”x15 53 27 15 75 7,0127CHW18X12 1/2”x18 55 27 15 75 6,7827CHW22X34 3/4”x22 59 31 15 45 8,1827CHW28X10 1”x28 72 39 10 20 23,8727CHW28X12 28x1/2” 10,92

27CHW35X114 1 1/4”x35 81 46 10 10 18,43



Art. nr Ø A Euro / St27UHW15X12 1/2”x15 51 10 100 5,8427UHW15X34 3/4”x15 57 10 100 6,8327UHW18X12 1/2”x18 53 10 100 5,9127UHW18X34 3/4”x18 59 10 70 6,7027UHW22X12 1/2”x22 51 10 40 4,7427UHW22X34 3/4”x22 60 10 40 7,3927UHW22X10 1”x22 58 10 40 8,6827UHW28X34 3/4”x28 62 10 40 9,1427UHW28X10 1”x28 62 10 40 9,1327UHW28X114 1 1/4”x28 94 10 14,5227UHW35X10 1”x35 79 10 10 12,4327UHW35X114 1 1/4”x35 82 10 10 11,7927UHW35X112 1 1/2”x35 98 10 20,4326UHW42X114 1 1/4”x42 83 10 17,5326UHW42X112 1 1/2”x42 79 10 60 16,7526UHW54X112 1 1/2”x54 87 5 24,4026UHW54X20 2”x54 97 5 30 24,8426UHW76X212 2 1/2”x76,1 127 1 1 61,65



Art. nr Ø A B Euro / St27CMW15X12 1/2”x15 53 34 15 75 6,3027CMW18X12 1/2”x18 55 36 15 75 7,3827CMW22X34 3/4”x22 63 42 10 45 10,2427CMW28X10 1”x28 73 53 10 20 10,0727CMW35X114 1 1/4”x35 82 52 10 10 18,6626CMW42X112 1 1/2”x42 136 68 10 40 23,8026CMW54X20 2”x54 155 70 5 20 31,90



20

Wal lp late female x press / Deckenwinkel 90º IG / Coude taraudé avec appl ique

Art. nr Ø A B Euro / St27CFW15X12 1/2”x15 53 27 15 45 6,7227CFW18X12 1/2”x18 57 27 15 45 7,5727CFW22X34 3/4”x22 60 32 10 30 9,3827CFW28X10 1”x28 72 42 10 10 11,21

bend 2 p ieces / Übergangswinkel 90º IG / Coude écrou tournant

Art. nr Ø A B Euro / St27CP15X12 1/2”x15 25 45 11,4427CP18X12 1/2”x18 15 45 13,5127CP18X34 3/4”x18 10 45 14,5127CP22X34 3/4”x22 10 30 16,17

27CP22X10 1”x22 10 10 16,88

by-pass bend Ø x press / Sprungbogen IA / baïonette MF

Art. nr Ø A B Euro / St27CDHM15 15x15 18 43 10 40 9,4927CDHM18 18x18 20 45 5 30 10,2527CDHM22 22x22 22 50 5 20 11,45

Straight by-Pass Ø x Ø / Übersprungbogen AA / Chapeau de gendarme

Art. nr Ø A B Euro / St26ST15 15x15 62 200 10 1 7,3526ST18 18x18 73 230 10 1 8,3226ST22 22x22 75 255 10 1 9,7826ST28 28x28 94 280 5 1 11,89

Wal lp late female x press / Deckenwinkel 90º IG / Coude taraudé avec appl ique

Art. nr Ø A B Euro / St27CF15X12 1/2”x15 42 27 15 45 6,7227CF18X12 1/2”x18 44 27 15 45 7,5727CF22X34 3/4”x22 46 33 10 30 9,3827CF28X10 1”x28 52 39 10 10 11,21

A

B

C

Expansion compensator with flanges / Kompensator II / mit Flanschen / Compensateur d’expansion avec brides

Art. nr Ø A B Euro / St27CD15 15x15 320 25 1 1 62,0127CD18 18x18 320 25 1 1 63,8627CD22 22x22 320 30 1 1 66,2527CD28 28x28 320 38 1 1 83,2127CD35 35x35 340 48 1 1 112,0926CD42 42x42 340 54 1 1 131,1626CD54 54x54 400 71 1 1 183,3826CD76 76,1x76,1 286 1 1 487,5926CD88 88,9x88,9 290 1 1 622,74

26CD108 108x108 280 1 1 858,59




21

Joint connector female x press / Übergangsverschraubung IG / Raccord union taraudé

Art. nr Ø A Euro / St27RTUH15X12 1/2”x15 73 10 50 15,7227RTUH18X12 1/2”x18 72 10 50 17,8627RTUH22X34 3/4”x22 76 5 25 19,7627RTUH28X10 1”x28 83 4 16 27,2427RTUH35X114 1 1/4”x35 93 4 16 34,0226RTUH42X112 1 1/2”x42 96 2 8 34,5826RTUH54X20 2”x54 113 1 4 47,29

Joint connector press x press / Verschraubung mit Pressmuffen / Raccord conique

Art. nr Ø A Euro / St27RTP15 15x15 34 10 40 15,0027RTP18 18x18 38 10 40 16,4627RTP22 22x22 41 5 30 21,2627RTP28 28x28 49 4 20 18,6527RTP35 35x35 55 4 10 30,5426RTP42 42x42 55 2 40 31,8226RTP54 54x54 66 1 25 47,29

Endcap press / Verschlusskappe / bouchon

Art. nr Ø A Euro / St27TA15 15 36 10 150 5,6527TA18 18 39 10 120 6,4027TA22 22 41 10 100 6,9827TA28 28 47 5 120 8,5427TA35 35 52 5 40 9,7326TA42 42 55 5 25 12,8026TA54 54 63 3 15 16,8826TA76 76,1 97 1 1 31,8526TA88 88,9 108 1 1 37,2026TA108 108 129 1 1 49,95

Joint connector male x press / Übergangsverschraubung AG / Raccord union fileté

Art. nr Ø A Euro / St27RTUM15X12 1/2”x15 76 10 50 19,5527RTUM18X12 1/2”x18 76 10 50 15,0627RTUM22X34 3/4”x22 82 5 25 19,5527RTUM22X10 22x1” 24,6827RTUM28X10 1”x28 88 4 16 19,5527RTUM35X114 1 1/4”x35 100 4 16 37,8826RTUM42X112 1 1/2”x42 106 2 8 31,8226RTUM54X20 2”x54 122 1 4 47,29

Compressed air bend / Druckluft-Rohrbogen / Crosse d’évêque

Art. nr Ø A B Euro / St26CC15 15x15 98 306 1 1 9,3426CC18 18x18 144 370 1 1 9,9826CC22 22x22 170 410 1 1 10,30

bend 15º / Passbogen 15º AA / Coude d’a justement 15º

Art. nr Ø A B Euro / St26CA1528 28x28 67 134 3 15 5,8226CA1535 35x35 78 222 3 12 8,7826CA1542 42x42 121 280 3 12 13,6526CA1554 54x54 140 337 3 9 16,80


22


Art. nr Ø A B Euro / St26CA9015 15x15 120 75 10 40 3,9626CA9018 18x18 120 75 10 30 3,8226CA9022 22x22 120 77 10 20 4,2026CA9028 28x28 120 102 5 15 5,9326CA9035 35x35 200 130 3 12 8,8526CA9042 42x42 250 185 2 12 13,6026CA9054 54x54 300 207 2 8 16,95

O-r ing EPDM / D ichtung EPDM (schwarz) / Joint EPDM

Art. nr Ø E C Euro / St06004213 12 12 2,4 10 1,1906003930 15 15 2,6 10 0,0806003931 18 18 2,6 10 0,0906004239 22 18 2,6 10 0,13

06003932 22 22 3,2 10 0,23

06003933 28 28 3,1 10 0,2906003934 35 35 3,1 10 0,3506003935 42 42 4,1 10 0,7206003936 54 54 4,1 10 1,6706004208 76,1 76,1 7 1 2,0006004209 88,9 88,9 8 1 5,0206004210 108 108 10 1 3,96

O-ring, FPM (DIN ISO 1629) / Dichtung FKM (grün) / Joint FPM (DIN ISO 1629)/FKM (ASTM D1418)

Art. nr Ø E C Euro / St07451245 12 12 2,4 10 07451250 15 15 2,6 10 0,2907451252 18 18 2,6 10 0,35

27JVFKM22 22 22 3,2 10 0,52

07451260 28 28 3,1 10 0,64

07451265 35 35 3,1 10 0,8826JVFKM42 42 42 4,1 10 1,6926JVFKM54 54 54 4,1 10 1,9826JVFKM76 76,1 76,1 7 1 8,1626JVFKM88 88,9 88,9 8 1 10,47

07451290 108 108 10 1 19,74






23

O - r ing, FKM Red / D ichtung, FKM Rot / Joint , FKM rouge

Art. nr Ø E C Euro / St07451300 15 15 2,6 10 0,84 07451305 18 18 2,6 10 1,0007451310 22 22 3,2 10 1,15 07451315 28 28 3,1 10 1,31

07451320 35 35 3,1 10 1,57

07451325 42 42 4,1 10 2,21 07451330 54 54 4,1 10 2,51 07451335 76,1 76,1 7 1 5,55 07451340 88,9 88,9 8 1 8,34 07451345 108 108 10 1 15,31

Flat sealingring for joint connector, EPDM / Flachdichtung, EPDM (schwarz) / Plat joint. EPDM

Art. nr Ø A B Euro / St07451229 1/2" 15 23 10 0,72 07451230 3/4" 15 23 10 0,7207451231 1" 22,5 29,5 10 0,8407451232 1 1/4" 27 38,5 10 1,03

07451233 1 1/2 35 44,5 10 1,15

07451236 2" 40 50,5 10 1,3807451237 2 1/2" 53,5 66 10 1,82

steel


Steel zinc plated pressfittings for thinwalled steel galvanized pipesPressfittings aus C-Stahl für dünnwandige C-Stahlrohre

Raccords à sertir en Acier Galvanisé




Dimensions / Durchmesser (mm) 12 / 15 / 18 / 22 / 28 / 35 / 42 / 54 / 76,1, 88,9, 108


2 ● Instalpress Steel Galvanized Tubes-C-Stahlrohre nach EN 10305-3

26

Galvanized both sides CS Pipe/Dünnwandiges C-Stahlrohr – innen und außen verzinkt/Tube électrozingué intérieur-extérieur

Ø Ref. (+/-) Kg/m €/m

12X1,2 F03001000 0,416 Consult us / Preis auf Anfrage








76,1X2,0 F03001150 3,655 Consult us / Preis auf Anfrage

88,9X2,0 F03001170 4,286 Consult us / Preis auf Anfrage


Galvanized outside CS pipe / Dünnwandiges C-Stahlrohr – außen verzinkt / Tube électrozingue à l’exterieur

Ø Ref. (+/-) Kg/m €/m

12X1,2 03001000 0,36 Consult us / Preis auf Anfrage








76,1X2,0 03001150 3,62 Consult us / Preis auf Anfrage

88,9X2,0 03001170 3,62 Consult us / Preis auf Anfrage


Produced according to the EN 10.305-3 norm - Price in Euros/Meters - Standard length 6 meter Nach EN 10305-3 – Preise in EUR/m – Standardlänge: 6 m

Produced according to the EN 10.305-3 norm - Price in Euros/Meters - Standard length 6 meter Nach EN 10305-3 – Preise in EUR/m – Standardlänge: 6 m

2 ● Instalpress Steel Zinc Plated Pressfittings - Profile M

27

Straight reduction press x press / Reduziermuffe I I / Reduction FF

Art. nr Ø A Euro / St07450200 22x15 47 10 100 3,7107450205 28x15 59 10 60 4,4607450210 28x22 63 10 50 4,8707450215 35x28 55 4 24 8,03

Straight Coupling press x press / Muffe II / Manchon FF

Art. nr Ø A Euro / St07450000 12x12 47 10 180 1,5307450005 15x15 52 10 150 1,6707450007 18x18 52 10 120 1,7107450010 22x22 VdS 59 10 80 1,8307450015 28x28 VdS 61 10 50 2,2407450020 35x35 VdS 72 4 28 3,4707450025 42x42 VdS 79 2 20 4,6307450030 54x54 VdS 90 2 12 5,5007450035 76,1x76,1 VdS 142 1 13,2907450040 88,9x88,9 163 1 18,22

07450045 108x108 192 1 24,95


Art. nr Ø A Euro / St07450050 3/8”x12 36 10 180 3,7907450055 3/8”x15 43 10 150 4,2307450060 1/2”x15 43 10 150 4,2307450057 1/2”x18 44 10 120 4,5507450065 1/2”x22 VdS 44 10 100 5,6507450070 3/4”x15 44 10 100 5,7207450072 3/4”x18 45 10 100 5,6007450075 3/4”x22 VdS 45 10 90 5,4307450080 3/4”x28 VdS 47 10 50 6,4707450085 1”x22 VdS 47 10 50 6,4107450090 1”x28 VdS 49 10 50 6,4907450092 1/2”x35 10 50 14,1807450095 1”x35 VdS 49 4 28 9,3207450100 1 1/4”x35 VdS 54 4 28 9,4007450105 1 1/4”x42 VdS 59 4 24 12,5107450110 1 1/2”x42 VdS 59 4 24 11,2907450115 2”x54 VdS 69 2 10 16,6507450120 2 1/2”x76,1 123 1 53,4707450125 3”x88,9 137 1 68,69

07450130 4”x108 156 1 152,43


Art. nr Ø A Euro / St07450145 1/2”x12 35 10 120 3,9807450150 1/2”x15 37 10 120 4,5307450152 1/2”x18 37 10 120 4,9007450155 1/2”x22 VdS 37 10 100 5,4307450157 3/4”x18 38 10 80 5,9607450160 3/4”x22 VdS 40 10 80 5,8307450165 1”x22 VdS 43 10 50 6,7907450168 3/4”x28 43 10 50 9,8507450170 1”x28 VdS 45 10 50 6,9307450175 1 1/4”x35 VdS 73 4 20 9,2907450180 1 1/2”x42 75 1 16,12

07450185 2”x54 85 1 21,88


28

Sleeve Coupling press x press / Schiebemuffe II / Manchon coulissant FF

Art. nr Ø A Euro / St07450220 12x12 56 10 180 1,8807450225 15x15 75 10 120 2,0907450227 18x18 77 10 70 2,6307450230 22x22 86 10 50 2,6607450235 28x28 92 10 30 3,4107450240 35x35 99 10 20 5,9907450245 42x42 119 4 12 6,6207450250 54x54 145 4 8 7,5507450255 76,1x76,1 230 1 21,9007450260 88,9x88,9 262 1 28,50

07450265 108x108 304 1 30,00

Joint connector female x press / Übergangsmuffe IG / Écrou Tournant joint

Art. nr Ø A Euro / St07450266 1/2”X15 10 120 7,1907450267 1/2”X18 10 7,0307450270 3/4”x15 37 10 120 6,1107450272 3/4”x18 39 10 100 6,3007450273 3/4”x22 10 60 6,3807450275 1”x22 VdS 40 10 60 7,0207450276 1”X28 4 40 8,4207450280 1 1/4”x28 VdS 44 4 40 9,4707450283 1 1/4"x35 VdS 4 24 Consult us07450285 1 1/2"x35 VdS 48 4 24 14,6707450287 1 1/2"x42 VdS 4 20 Consult us07450293 2"x54 VdS 2 10 Consult us07450296 2 1/2"x76 2 10 Consult us


Art. nr Ø A Euro / St07450297 12x12 42 10 120 2,6707450300 15x15 41 10 100 2,7007450302 18x18 45 10 80 2,9907450305 22x22 VdS 49 10 50 3,1907450310 28x28 VdS 59 10 30 3,9807450315 35x35 VdS 72 4 12 7,6007450320 42x42 VdS 91 2 8 12,7307450325 54x54 VdS 110 2 6 14,7107450330 76,1x76,1 VdS 165 1 23,8107450335 88,9x88,9 220 1 28,04

07450340 108x108 265 1 40,91


Art. nr Ø A B Euro / St07450468 12x12 42 48 10 140 2,3607450350 15x15 41 49 10 120 2,5107450470 18x18 45 53 10 80 2,8007450355 22x22 VdS 49 59 10 50 3,0107450360 28x28 VdS 59 69 10 30 3,7507450365 35x35 VdS 72 83 4 12 7,4607450370 42x42 VdS 91 96 2 8 12,7307450375 54x54 VdS 110 116 1 6 14,4907450476 76,1x76,1 VdS 165 185 1 23,8107450477 88,9x88,9 225 245 1 30,84

07450478 108x108 262 289 1 37,27


29

bend 90º male x press / bogen 90º AG / Coude f i leté 90º

Art. nr Ø A Euro / St07450395 3/8”x12 42 10 100 7,1307450400 3/8”x15 41 10 100 6,6407450405 1/2”x15 41 10 80 6,9807450407 1/2”x18 45 10 70 7,1407450408 1/2"x22 - 10 40 7,5407450410 3/4”x22 49 10 40 8,6007450415 1”x28 59 4 20 10,3807450420 1 1/4”x35 72 4 12 15,3307450425 1 1/2”x42 91 2 8 24,5807450430 2”x54 110 1 4 31,67

bend 90º female x press / bogen 90º IG / Coude taraudé 90º

Art. nr Ø A Euro / St07450450 1/2”x15 41 10 80 7,0407450452 1/2”x18 45 10 60 7,2307450453 1/2"x22 - 10 40 7,6007450455 3/4”x22 49 10 40 8,6607450460 1”x28 10,82

07450465 1 1/4"x35 76 4 12 15,02


Art. nr Ø A B Euro / St07450461 1/2”x15 Consult us07450462 1/2”x18 Consult us07450463 3/4”x22 Consult us

07450464 1/2”x28 Consult us


Art. nr Ø A B Euro / St07450467 1/2”x15 39 28 4,5307450469 1/2”x18 39 28 4,4307450471 3/4”x22 43 32 4,34


Art. nr Ø A Euro / St07450520 12x12 32 10 150 2,8707450525 15x15 30 10 120 2,8207450527 18x18 31 10 100 2,9307450530 22X22 VdS 35 10 60 3,0607450535 28X28 VdS 41 10 30 4,0707450540 35x35 VdS 56 4 20 7,3507450545 42x42 VdS 63 2 12 9,1907450550 54x54 VdS 75 2 6 10,4107450555 76,1x76,1 VdS 117 1 20,9507450560 88,9x88,9 130 1 29,91

07450565 108x108 165 1 40,91


30


Art. nr Ø A B Euro / St07450570 12x12 32 41 10 150 2,7207450575 15x15 30 42 10 120 2,5707450577 18x18 31 35 10 100 2,7607450580 22x22 VdS 35 47 10 60 2,8907450585 28x28 VdS 41 47 10 30 3,8407450590 35x35 VdS 36 66 4 20 7,0107450595 42x42 VdS 63 70 2 16 9,0707450600 54x54 VdS 75 82 2 6 10,3107450605 76,1x76,1 VdS 130 125 1 22,8607450610 88,9x88,9 145 145 1 33,6407450615 108x108 165 176 1 40,91

T - coupl ing 3 x press / T - Stück / Té égal taraudé

Art. nr Ø A B Euro / St07450620 12x12x12 56 35 10 100 4,4707450625 15x15x15 74 36 10 80 4,9007450627 18x18x18 80 37 10 60 5,1307450630 22x22x22 VdS 82 43 10 40 5,2307450635 28x28x28 VdS 92 46 4 24 6,3307450640 35x35x35 VdS 102 55 2 12 9,9507450645 42x42x42 VdS 118 60 2 8 13,2807450650 54x54x54 VdS 142 73 1 4 16,4607450655 76,1x76,1x76,1 VdS 232 121 1 44,7607450660 88,9x88,9x88,9 262 126 1 51,4007450665 108x108x108 312 152 1 63,64


Art. nr Ø A B Euro / St07450670 12x15x12 56 38 20 100 4,6307450672 15x18x15 74 36 20 100 7,1207450675 15x22x15 74 42 10 50 7,4407450708 18x22x18 80 45 10 50 4,7407450685 22x28x22 82 45 10 30 7,62


Art. nr Ø A Euro / St07450690 22x15x15 10 40 7,9607450695 22x22x15 10 40 6,8607450700 28x22x22 5 20 8,3407450705 28x28x22 5 20 8,62


31


Art. nr Ø A B Euro / St07450671 15x12x15 74 33 10 70 4,2107450706 18x12x18 80 34 10 60 4,5007450707 18x15x18 80 35 10 60 4,7907450709 22x12x22 82 36 10 40 4,7007450710 22x15x22 82 40 10 40 5,3707450712 22x18x22 82 40 10 40 5,0407450715 28x15x28 92 42 10 30 6,0907450717 28x18x28 92 43 10 30 6,2707450720 28x22x28 VdS 92 46 10 30 6,7307450725 35x15x35 102 45 4 20 8,9407450727 35x18x35 102 45 4 16 9,3207450730 35x22x35 VdS 102 48 4 16 9,6107450735 35x28x35 VdS 102 50 4 16 9,7807450739 42x18x42 6 60 14,1807450740 42x22x42 VdS 118 54 4 12 12,4507450745 42x28x42 VdS 118 53 4 12 12,7307450750 42x35x42 VdS 118 57 2 10 12,7307450754 54x18x52 - - 4 40 16,9507450755 54x22x54 VdS 142 56 1 6 13,9507450760 54x28x54 VdS 142 59 1 6 14,4907450765 54x35x54 VdS 142 64 1 6 14,9707450770 54x42x54 VdS 142 68 1 6 15,3007450773 76,1x28x76,1 37,6207450776 76,1x35x76,0 38,1007450777 76,1x42x76,1 40,4707450775 76,1x54x76,1 VdS 232 80 1 44,1107450782 88,9x28x88,9 61,2107450783 88,9x35x88,9 62,3407450778 88,9x42x88,9 53,7207450779 88,9x54x88,9 54,2807450780 88,9x76,1x88,9 260 117 1 61,9207450786 108x28x108 73,0107450787 108x35x108 73,5507450797 108x42x108 69,7107450795 108x54x108 71,1207450790 108x76x108 77,03

07450785 108x88,9x108 312 135 1 73,45


Art. nr Ø A B Euro / St07450800 15x1/2"x15 74 38 10 60 7,5607450802 18x1/2"x18 80 39 10 50 7,5707450806 18x3/4"x18 10 40 5,5807450805 22x1/2"x22 VdS 82 42 10 40 7,4007450824 22x3/4"x22 VdS 82 43 10 40 9,0307450810 28x1/2"x28 VdS 92 44 10 30 7,5507450826 28x3/4"x28 VdS 92 45 4 28 8,6107450815 35x1/2"x35 VdS 102 48 4 16 9,7607450827 35x3/4"x35 VdS 102 48 2 14 12,8807450820 42x1/2"x42 VdS 118 46 2 10 14,3407450828 42x3/4"x42 VdS 118 51 1 8 14,3407450825 54x1/2"x54 VdS 142 58 1 6 14,9307450841 54x2"x54 VdS 1 1 Consult us07450829 54x3/4"x54 VdS 142 59 1 6 15,6207450830 76,1x3/4"x76,1 VdS 232 69 1 43,3307450842 76,1x2"x76,1 1 Consult us07450835 88,9x3/4"x88,9 262 76 1 45,0207450843 88,9x2"x88,9 1 Consult us07450840 108x3/4"x108 312 86 1 65,43

07450844 108x2"x108 1 0 Consult us


32


Art. nr Ø L H Euro / St07450850 3/8”x15 38 22 10 80 7,8807450855 1/2”x15 39 28 10 80 8,3607450857 1/2”x18 39 28 10 80 8,5407450860 3/4”x22 VdS 43 32 10 50 9,46

Straight adapter female x Ø / Übergang A/IG / Embout taraudé

Art. nr Ø A Euro / St07450870 1/2”x12 58 10 120 2,7607450875 1/2”x15 61 10 100 2,8707450877 1/2”x18 61 10 100 2,9107450882 3/4”x18 64 10 80 4,6807450880 1/2”x22 61 10 100 3,4307450885 3/4”x22 65 10 80 4,83

Straight adapter male x Ø / Übergangsverschraubung A/AG / Embout f i leté

Art. nr Ø A Euro / St07450900 1/2”x15 57 10 120 2,7607450902 1/2”x18 57 10 150 2,7907450905 3/4”x15 57 10 100 4,1107450907 3/4”x18 59 10 100 4,0907450910 3/4”x22 59 10 90 4,40

Endcap press / Verschlußkappe / bouchon

Art. nr Ø A Euro / St07450975 15 38 20 300 3,1007450977 18 41 20 240 3,3807450980 22 42 10 150 3,6607450985 28 46 10 80 4,2907450990 35 51 4 60 5,0207450995 42 59 4 20 7,7407451000 54 73 2 16 8,7007451005 76,1 95 1 17,1407451010 88,9 115 1 21,5007451015 108 130 1 29,09

bend 90º Ø x Ø / Passbogen 90º AA / Coude d’a justement 90º °

Art. nr Ø A B Euro / St07450479 12x12 120 70 10 70 2,2907450480 15x15 120 70 10 60 2,2907450482 18x18 120 70 10 50 2,2707450485 22x22 120 70 10 40 2,4707450490 28x28 125 97 4 20 3,0107450495 35x35 201 121 2 6 7,4407450500 42x42 254 160 1 2 11,3907450505 54x54 302 202 1 2 13,99

Weld-on pipe / Anschweißrohr / Tube à souder

Art. nr Ø Euro / St07451025 17,2/15x1,2 20 Consult us07451027 21,3/18x1,2 20 Consult us07451030 26,9/22x1,5 20 Consult us07451035 33,7/28x1,5 20 Consult us07451040 38x35 10 Consult us07451045 44,5x42 2 Consult us07451050 57x54 2 Consult us07451057 76,1x80,5 100 Consult us07451062 88,9x94,9 1 Consult us07451067 108x114 1 Consult us


33

Straight adapter press x compression / Übergangsmuffe mit Schneidringverschraubung / Adaptateur compression

Art. nr Ø A Euro / St07451150 15x15 10 80 6,2907451155 22x22 10 50 8,48

07451160 28x28 10 40 11,20

Straight coupling reduction Ø x press / Reduziermuffe IA / Reduction FM

Art. nr Ø A Euro / St07451055 15x12 51 10 200 2,0007451060 18x12 53 10 160 1,9807451065 18x15 55 10 160 2,0407451070 22x12 60 10 120 2,2007451075 22x15 60 10 120 2,0507451077 22x18 57 10 100 2,1707451080 28x15 81 10 90 2,7207451082 28x18 84 10 80 2,8207451085 28x22 VdS 70 10 60 2,7207451090 35x15 84 5 40 6,3607451092 35x18 87 5 40 6,5507451095 35x22 VdS 76 10 40 4,4007451100 35x28 VdS 74 4 36 3,1707451105 42x22 VdS 87 4 32 9,0407451110 42x28 VdS 100 4 24 7,4807451115 42x35 VdS 78 4 24 5,8507451120 54x22 VdS 110 2 16 15,9907451125 54x28 VdS 100 2 14 8,8307451130 54x35 VdS 129 2 14 8,8307451135 54x42 VdS 108 2 12 6,5507451137 76,1x42 VdS 151 1 25,8807451139 76,1x54 145 1 23,0207451141 88,9x54 157 1 25,9207451143 88,9x76,1 157 1 26,7207451144 108x54 46,9407451145 108x76,1 196 1 31,82

07451147 108x88,9 192 1 35,45

Flange with press-joint / Flansch mit Pressmuffe / bride à bout lisse

Art. nr Ø A B Euro / St07450934 42 1 40,2107450936 54 1 48,0007450937 76,1 VdS 185 87 1 47,6207450938 88,9 200 100 1 56,0707450939 108 220 117 1 72,73

by-pass bend Ø x Ø / Sprungbogen AA / D iversion Courve MM

Art. nr Ø A Euro / St07450920 12x12 154 10 80 3,0107450925 15x15 158 10 60 3,2207450927 18x18 165 10 60 3,5007450930 22x22 178 10 40 3,9907450935 28x28 210 4 16 4,52

Crossover coupl ing 4 x press / Kreuzstück 90º / Croix reduct ion

Art. nr Ø Euro / St07450950 15x15x15x15 10 40 11,2007450955 22x15x22x15 10 30 10,9607450956 18x15x18x15 10 30 10,7107450957 22x18x22x18 10 30 10,7107450960 28x18x28x18 2 10 8,5507450961 42x28x42x28 1 5 12,7907450958 76,1x28x76,1x28 1 51,50

07450959 88,9x28x88,9x28 1 56,85


34

Straight male union connector / Übergangsverschraubung AG / Raccord union f i letéArt. nr Ø A B Euro / U

07451750 15x1/2” - - - - 10,98

07451760 18x1/2” - - - - 11,76

07451775 22x3/4” - - - - 13,17

07451780 22x1” - - - - 15,87

07451785 28x1” - - - - 17,48

07451790 35x1 1/4” - - - - 23,71

07451795 42x1 1/2” - - - - 36,42

07451800 54x2” - - - - 75,11

Straight female union connector / Übergangsverschraubung IG / Raccord union taraudéArt. nr Ø A B Euro / U

07451700 15x1/2” - - - - 10,26

07451710 18x1/2” - - - - 11,41

07451720 22x3/4” - - - - 13,50

07451730 22x1” - - - - 20,57

07451735 35x1 1/4” - - - - 27,61

07451740 42x1 1/2” - - - - 47,63

07451745 54x2” - - - - 64,87


Steel Zinc Plated pressfittings for thinwalled steel galvanized pipesPressfittinge für dünnwändige verzinkte Stahlröhre

Raccords à sertir en Acier Galvanisé




Dimensions / Durchmesser (mm) 12 / 15 / 18 / 22 / 28 / 35 / 42 / 54 / 76,1, 88,9, 108


Firepress

3 ● Instalpress-Firepress

Galvanized both sides CS Pipe/Dünnwandiges C-Stahlrohr – innen und außen verzinkt/Tube électrozingué intérieur-extérieur

Ø REF. (+/-) KG/M M/BUNDLE €/m

12x1,2 F03001000 0,416 624 *

15x1,2 F03001010 0,408 1.836 *

18x1,2 F03001025 0,497 1.524 *

22x1,2 F03001030 0,616 1.290 *

28x1,5 F03001050 0,980 960 *

35x1,5 F03001070 1,239 762 *

42x1,5 F03001090 1,498 762 *

54x1,5 F03001110 1,942 366 *

76,1x2,0 F03001150 3,655 222 *

88,9x2,0 F03001170 4,286 198 *

108x2,0 F03001190 5,228 162 *

Sleeve adapter to Press/Reduziermuffe-Anschluss/Raccord Press

F03002030 76-88-108 X 28 29 37 29,5 45 *

F03002035 76-88-108 X 35 36 41 29,5 50 *

F03002040 76-88-108 X 42 43,2 43 43 60 *

F03002045 76-88-108 X 54 55,2 49 43 65 *

OA

ODOC

B

AA

Spr inkler Coupl ing/Spr inkler-Anschluss/Spr inkler Couplage

F03002000 28-35 X 1/2" 28 28 15 1/2” *

F03002005 42-54 X 1/2" 28 28,4 18 1/2” *

F03002010 76-88-108 X 1/2" 28 25,9 18 1/2” *

F03002015 42-54 X 3/4" 38 27 24 3/4” *

F03002020 76-88-108 X 3/4" 38 23,5 24 3/4” *

F03002025 76-88-108 X 1" 44 29,5 29,5 1” *

A

OB

C

OD

36 * Consult us

3 ● Instalpress-Firepress

3 Meters module F i repress, p ipe en 10305-3 2 s ides, 1 out let 1/2”ART. NR Ø LENGTH OUTLET NUT €/U

F03003100 35X1,5 3 M 1S 1/2" *

F03003105 42X1,5 3 M 1S 1/2" *

F03003110 54X1,5 3 M 1S 1/2" *

F03003115 76,1X2,0 3 M 1S 1/2" *

F03003120 88,9X2,0 3 M 1S 1/2" *

F03003125 108X2,0 3 M 1S 1/2" *

3 Meters module F i repress, p ipe en 10305-3 2 s ides, 1 out let 3/4”F03003130 35X1,5 3 M 1S 3/4" *

F03003135 42X1,5 3 M 1S 3/4" *

F03003140 54X1,5 3 M 1S 3/4" *

F03003145 76,1X2,0 3 M 1S 3/4" *

F03003150 88,9X2,0 3 M 1S 3/4" *

F03003155 108X2,0 3 M 1S 3/4" *

6 Meters module F i repress, p ipe en 10305-3 2 s ides, 2 out let 1/2”F03006200 35X1,5 6M 2S 1/2" *

F03006205 42X1,5 6M 2S 1/2" *

F03006210 54X1,5 6M 2S 1/2" *

F03006215 76,1X2,0 6M 2S 1/2" *

F03006220 88,9X2,0 6M 2S 1/2" *

F03006225 108X2,0 6M 2S 1/2" *

6 Meters module F i repress, p ipe en 10305-3 2 s ides, 2 out let 3/4”F03006230 35X1,5 6M 2S 3/4" *

F03006235 42X1,5 6M 2S 3/4" *

F03006240 54X1,5 6M 2S 3/4" *

F03006245 76,1X2,0 6M 2S 3/4" *

F03006250 88,9X2,0 6M 2S 3/4" *

F03006255 108X2,0 6M 2S 3/4" *

6 Meters module F i repress, p ipe en 10305-3 2 s ides, 3 out lets 1/2”F03006300 35X1,5 6M 3S 1/2" *

F03006305 42X1,5 6M 3S 1/2" *

F03006310 54X1,5 6M 3S 1/2" *

F03006315 76,1X2,0 6M 3S 1/2" *

F03006320 88,9X2,0 6M 3S 1/2" *

F03006325 108X2,0 6M 3S 1/2" *

6 Meters module F i repress, p ipe en 10305-3 2 s ides, 3 out lets 3/4”F03006330 35X1,5 6M 3S 3/4" *

F03006335 42X1,5 6M 3S 3/4" *

F03006340 54X1,5 6M 3S 3/4" *

F03006345 76,1X2,0 6M 3S 3/4" *

F03006350 88,9X2,0 6M 3S 3/4" *

F03006355 108X2,0 6M 3S 3/4" *

A

CF

E

DB

FD

C

EA

37* Consult us


Capillary fittings / Lötfittings / Accessoires capillaires

4 ● Capillary fittings / Lötfittings (Edelstahl 1.4401) / Accessoires capillaires (AISI-316)

40

90º E lbow FF / bogen 90º I I / Coude 90º FF

Art. nr Ø A B C Euro / St204C90HH10 10 9 30,5 20 25 *204C90HH12 12 10 35,5 24 25 *204C90HH15 15 12 41,5 28 25 *204C90HH18 18 14 47,5 32 25 *204C90HH22 22 17 56,5 38 15 *204C90HH28 28 20 72 50 5 *204C90HH35 35 25 95 68 5 *204C90HH42 42 29 112 80 5 *

90º E lbow FM / bogen 90º IA / Coude 90º MF

Art. nr Ø A B C Euro / St204C90HM10 10 9 31 20 25 *204C90HM12 12 10 36 24 25 *204C90HM15 15 12 42 28 25 *204C90HM18 18 14 48 32 25 *204C90HM22 22 17 57 38 15 *204C90HM28 28 20 72 50 5 *204C90HM35 35 25 95 68 5 *204C90HM42 42 29 111 80 5 *

45º E lbow FF / bogen 45º I I / Coude 45º FF

Art. nr Ø A B C Euro / St204C45HH10 10 9 19 20 25 *204C45HH12 12 10 28 24 25 *204C45HH15 15 12 30 28 25 *204C45HH18 18 14 33 32 25 *204C45HH22 22 17 38 38 25 *204C45HH28 28 20 48 50 10 *204C45HH35 35 25 65 68 10 *204C45HH42 42 29 77 80 5 *

45º E lbow FM / bogen 45º IA / Coude 45º MF

Art. nr Ø A B C Euro / St204C45HM10 10 9 19 20 25 *204C45HM12 12 10 28 24 25 *204C45HM15 15 12 30 28 25 *204C45HM18 18 14 33 32 25 *204C45HM22 22 17 38 38 25 *204C45HM28 28 20 48 50 10 *204C45HM35 35 25 65 68 10 *204C45HM42 42 29 77 80 5 *

Coupl ing FF / Muffe I I / Manchon taraudé

Art. nr Ø A B C Euro / St204M10 10 9 24 25 *204M12 12 10 26 25 *204M15 15 12 30 25 *204M18 18 14 34 25 *204M22 22 17 40 25 *204M28 28 20 46 10 *204M35 35 25 56 10 *

204M42 42 29 64 10 *

Equal tee female / T-Stück / Té égal femel le

Art. nr Ø A B C Euro / St204T10 10 9 38 19 25 *204T12 12 10 42 21 25 *204T15 15 12 49 24,5 25 *204T18 18 14 56 28 25 *204T22 22 17 66 33 15 *204T28 28 20 80 40 5 *204T35 35 25 99 49,5 5 *204T42 42 29 114 57 5 *

* Consult us


41

Reducing tee / T- Stück reduziert / Té réduit

Art. nr Ø A B C Euro / St204TR15X12 15X12 12 49 22,5 25 *204TR18X12 18X12 14 56 24 25 *204TR18X15 18X15 14 56 26 25 *204TR22X12 22X12 17 66 26 15 *204TR22X15 22X15 17 66 28 15 *204TR22X18 22X18 17 66 30 15 *204TR28X15 28X15 17 80 31 5 *204TR28X18 28X18 20 80 33,5 5 *204TR28X22 28X22 20 80 37 5 *204TR35X15 35X15 20 65 33 5 *204TR35X18 35X18 25 65 35 5 *204TR35X22 35X22 25 65 36,5 5 *204TR35X28 35X28 25 99 43,5 5 *204TR42X15 42X15 29 86 37 5 *204TR42X18 42X18 29 86 39 4 *204TR42X22 42X22 29 86 41 4 *204TR42X28 42X28 29 86 44 4 *204TR42X35 42X35 29 86 41 4 *

Reducer FM / Reduziermuffe IA / Réduct ion MF

Art. nr Ø A B C Euro / St204RE12X10 12X10 10 25 9 25 *204RE15X10 15X10 - - - 25 *204RE15X12 15X12 13 37 11 25 *204RE18X12 18X12 15 40 11 25 *204RE18X15 18X15 15 40 13º 25 *204RE22X12 22X12 18 44 11 25 *204RE22X15 22X15 18 49 13 25 *204RE22X18 22X18 18 47 13 25 *204RE28X12 28X12 20 40 10 10 *204RE28X15 28X15 20 45 12 10 *204RE28X18 28X18 20 52 14 10 *204RE28X22 28X22 20 59 17 10 *204RE35X28 35X28 27 62 20 10 *204RE42X28 42X28 31 67 20 5 *204RE42X35 42X35 29 70 23 5 *

bend 2 p ieces / Übergangswinkel 90º IG / écrou tournant

Art. nr Ø A B C Euro / St204CP12X38 12X3/8" 10 36 24 25 *204CP15X12 15X1/2" 12 38 28 25 *204CP18X34 18X3/4" 14 44 32 15 *204CP22X10 22X1" 17 54 38 10 *

Male thread connector / Übergang AG / Raccord f i leté

Art. nr Ø A B C Euro / St204EM10X14 10X1/4" 10 25 9 10 *204EM10X38 10X3/8" - - - 10 *204EM12X38 12X3/8" 13 37 11 10 *204EM12X12 12X1/2" 15 40 11 10 *204EM15X12 15X1/2" 15 40 13º 10 *204EM18X12 18X1/2" 18 44 11 10 *204EM18X34 18X3/4" 18 49 13 10 *204EM22X34 22X3/4" 18 47 13 10 *204EM22X10 22X1" 20 40 10 10 *204EM28X10 28X1" 20 45 12 10 *204EM35X114 35X1 1/4" 20 52 14 10 *204EM42X112 42X1 1/2" 20 59 17 10 *

* Consult us


42

Accessor ies / Zubehör / Accessoires

Art. nr Description - Beschreibung Euro / St

90AGCD Welding rod_Schweißstab_Baguette d’apport F-30 AG CD (250gr.) *

90AGR Covered welding rod_Beschichteter Schweißstab_Baguette d’apport enrobée F-30 AGR (250 gr.) *

91AGX Flux powder_Lötpulver_Flux en poudre AGX (250 gr.) TIN *

91AGF Flux paste_Lötpaste_Flux en pâte AGF (250 gr.) *

93DLI Cleaning disk (Black)_Putzscheibe (schwarz)_Disque Nettoyant (Noir) *

93DPU Cleaning disk (White)_Putzscheibe (weiss)_Disque Nettoyant (Blanc) *

93RPP Polish paste_Polierpaste_Pâte à polir *

92SF50 Adhesive_Klebstoff_Adhésif (50 ml.) *

94LF400 Cleaner_Reinigungsmittel_Nettoyant (400 ml.) *

Female thread connector / Übergangsverschraubung IG / Raccord taraudé

Art. nr Ø A B C Euro / St204EH10X14 10X1/4" 8 21 11 10 *204EH10X38 10X3/8" 8 23 13 10 *204EH12X38 12X3/8" 10 24 13 10 *204EH12X12 12X1/2" 10 26 15 10 *204EH15X12 15X1/2" 11 27 15 10 *204EH18X12 18X1/2" 13 29 15 10 *204EH18X34 18X3/4" 13 31 17 10 *204EH22X34 22X3/4" 16 34 17 10 *204EH22X10 22X1" 16 36 18 10 *204EH28X10 28X1" 19 36 18 10 *204EH35X114 35X1 1/4" 22 45 21 10 *204EH42X112 42X1 1/2" 24 50 23 10 *

Straight tap connector / Übergangsmuffe IG / Écrou tournant

Art. nr Ø A B C Euro / St204RP12X38 12X3/8" 33 10 3,5 25 *204RP12X12 12X1/2" 38 10 3,5 25 *204RP15X12 15X1/2" 37 12 3,5 25 *204RP18X12 18X1/2" 36 15 3,5 25 *204RP18X34 18X3/4" 42 15 3,5 25 *204RP18X78 18X7/8" 42 15 3,5 10 *204RP22X34 22X3/4" 41 18 3,5 25 *204RP22X78 22X7/8" 41 18 4 10 *204RP22X10 22X1" 48 18 4 15 *204RP28X10 28X1" 48 22 4 15 *204RP28X114 28X1 1/4" 48 22 4 10 *204RP35X114 35X1 1/4" 51 25 3,5 10 *204RP42X112 42X1 1/2" 61 29 3,5 10 *

Elbow F / Winkel 90º IG / Coude taraudé

Art. nr Ø A B C Euro / St204CH15X12 15X1/2" 22 25 12 10 *204CH18X12 18X1/2" 22 25 10 10 *

branch tee / T-Stück IG / Té taraudé

Art. nr Ø A B C Euro / St204TH15X12 15X1/2" 12 49 34 10 *204TH18X12 18X1/2" 14 56 36 10 *204TH22X12 22X1/2" 17 66 38 10 *

* Consult us


Filtube pipe clamps / Filtube Rohrschellen / Colliers Filtube

5 ● Filtube pipe clamps / Filtube Rohrschellen (Edelstahl 1.4301) / Colliers Filtube (AISI-304)

44

Single wood-screw / E infach mit Schraube / S imple v is à bois

Art. nr Ø Euro / St40AS10 10 150 0,3440AS12 12 150 0,3340AS15 15 90 0,4240AS18 18 60 0,4940AS22 22 40 0,6640AS28 28 20 1,0040AS35 35 10 1,7440AS42 42 7 2,32

Double wood-screw / Doppelt mit Schraube / Double v is à bois

Art. nr Ø Euro / St40AD10 10 75 1,6040AD12 12 50 1,2240AD15 15 30 1,2540AD18 18 25 1,4240AD22 22 15 1,78

Plus wood-screw / E infach mit Abstandhalter / P lus v is à bois

Art. nr Ø Euro / St40AP15 15 75 0,6140AP18 18 50 0,7240AP22 22 30 0,8940AP28 28 15 1,3240AP35 35 8 2,0540AP42 42 5 2,67

Metr ic female / E infach mit metr ischer Mutter / Métr ic femel le

Art. nr Ø Euro / St40AH10 10 150 1,0940AH12 12 150 1,1740AH15 15 90 0,9840AH18 18 60 1,0840AH22 22 40 1,2340AH28 28 20 1,5240AH35 35 10 2,5140AH42 42 7 3,09

Metr ic male / E infach mit metr ischer Schraube / Métr ic mâle

Art. nr Ø Euro / St40AM10 10 150 0,7940AM12 12 150 0,9040AM15 15 90 0,6840AM18 18 60 0,8140AM22 22 40 0,9240AM28 28 20 1,4540AM35 35 10 1,8440AM42 42 7 2,42


Other pipe clamps / Weitere Rohrschellen / D’autres colliers

6 ● Other pipe clamps / Weitere Rohrschellen / D’autres colliers

46

Type “F” / Rohrschellen F- Ausführung (Mutter M8-10. Edelstahl 1.4401) / Colliers type “F” (AISI-316)

Art. nr Ø Size/Maß Euro / St41ATF38 16-20 8 50 1,7841ATF12 21-26 8 50 1,8941ATF34 26-31 8 50 2,0641ATF1 33-38 8 50 2,31

41ATF114 40-45 8 50 2,4841ATF112 47-52 8 50 2,5441ATF54 52-57 8 50 2,8541ATF2 60-65 8 50 3,05

41ATF212 72-77 8-10 50 3,6441ATF3 87-94 8-10 25 3,98

41ATF100 98-105 8-10 25 4,2641ATF110 107-114 8-10 25 4,3141ATF4 111-118 8-10 25 4,40

41ATF125 121-128 8-10 25 4,6541ATF5 133-140 8-10 25 5,13

41ATF154 147-155 8-10 25 5,6141ATF6 158-170 8-10 25 5,50

41ATF204 198-210 8-10 25 6,63

Pipe clamps double nut M8-10 / Rohrschellen mit Schalldämmeinlage (Mutter M8-10. Edelstahl 1.4401) / Colliers avec écrou M8-10 (AISI-316)

Art. nr Ø Size/Maß Euro / St41AIDR12 21-26 1/2" 50 2,6841AIDR34 26-31 3/4" 50 2,8241AIDR1 33-38 1" 50 2,96

41AIDR114 40-45 1 1/4" 25 2,9641AIDR112 47-52 1 1/2" 25 3,3641AIDR54 52-57 54 mm. 25 3,5541AIDR2 60-65 2" 25 3,86

41AIDR212 72-77 2 1/2" 25 4,1441AIDR3 87-94 3" 25 4,60

41AIDR110 107-114 110 mm. 25 5,2241AIDR4 111-118 4" 25 5,30

41AIDR125 121-128 125 mm. 25 5,5041AIDR5 133-140 5" 25 5,89

41AIDR154 147-155 154 mm. 25 6,4341AIDR6 158-170 6" 25 6,68

Pipe clamps with plugs / Rohrschellen mit Mutter M6 (Edelstahl 1.4401) / Colliers avec écrou (AISI-316)

Art. nr Ø Metric Euro / St414ACTU12 12 6 10 0,99414ACTU15 15 6 10 0,99414ACTU18 18 6 10 1,06414ACTU20 20 6 10 1,09414ACTU22 22 6 10 1,12414ACTU25 25 6 10 1,16414ACTU28 28 6 10 1,19414ACTU32 32 6 10 1,26414ACTU35 35 6 10 1,29414ACTU40 40 6 10 1,42414ACTU50 50 6 10 1,52414ACTU54 54 6 10 1,59414ACTU63 63 6 10 1,72414ACTU75 75 6 10 1,85414ACTU90 90 6 10 2,02414ACTU110 110 6 5 2,25


47

Adjustable c l ips / Gelenkrohrschel len (Edelstahl 1 .4401) / Col l iers f lexib les (AIS I-316)

Art. nr Size/Maß Opening/Klemmbereich Euro / St

42SU17X19

Fleje 18x0,8 Tornillo M5x35

17-19 10 1,9842SU20X22 20-22 10 2,0542SU23X25 23-25 10 2,1242SU26X28 26-28 10 2,2242SU29X31 29-31 10 2,2842SU32X35 32-35 10 2,2242SU36X39

Fleje 20x1,0Tornillo M6x50

36-39 10 3,2142SU40X43 40-43 10 3,3142SU44X47 44-47 10 3,3442SU48X51 48-51 10 3,4142SU52X55


52-55 10 3,4742SU56X59 56-59 10 3,3142SU60X63 60-63 5 3,5742SU64X67


64-67 5 6,5542SU68X73 68-73 5 6,6542SU74X79 74-79 5 6,7542SU80X85 80-85 5 6,9142SU86X91 86-91 5 7,0542SU92X97 92-97 5 6,5842SU98X103 98-103 5 7,3442SU104X112


104-112 5 7,6142SU113X121 113-121 5 7,8142SU122X130 122-130 5 8,0442SU131X139


131-139 5 8,3042SU140X148 140-148 5 8,4742SU149X161 149-161 5 9,7242SU162X174 162-174 5 10,1942SU175X187 175-187 5 10,4942SU188X200 188-200 5 10,8242SU201X213 201-213 5 11,2142SU214X226 214-226 5 11,5442SU227X239 227-239 5 12,07

Jubilee clips / Schneckengewindeschellen (Edelstahl 1.4301) / Collier de serrage (AISI-304)

Art. nr Size/Maß Opening/Klemmbereich Euro / St

41ASF10X16 9 10-16 10 0,5741ASF16X27 12 16-27 10 0,8141ASF25X40 12 25-40 10 1,2141ASF32X50 12 32-50 10 1,2341ASF50X70 12 50-70 10 1,3041ASF70X90 12 70-90 10 1,4941ASF90X110 12 90-110 10 1,6941ASF110X130 12 110-130 10 2,0341ASF130X150 12 130-150 10 2,07


48

u-shaped staple / Rundstahlbügel (Edelstahl 1 .4301) / Etr iers en u (AIS I-304)

Art. nr Ø Size/Maß Euro / St41A14 14 6 10 0,4641A3/8 18 6 10 0,5341A12 22 6 10 0,5641A34 28 6 10 0,6341A1 34 6 10 0,6641A38 39 6 10 0,6941A114 43 6 10 0,6941A112 49 8 10 0,7941A53 54 8 10 1,1941A54 55 8 10 1,5941A2 61 8 10 1,5941A65 66 8 5 1,7541A212 77 8 5 1,8941A84 85 8 5 2,0241A3 90 8 5 2,02

41A104 105 10 5 3,8041A4 115 10 5 4,00

41A129 130 10 5 4,5641A5 144 10 5 4,96

41A154 155 10 1 5,1341A6 170 10 1 5,36

41A204 206 10 1 6,09

Stut bol t /Stockschrauben (Edelstahl 1 .4301) / Patte à v is (A IS I-304)

Art. nr Size/Maß Euro / St41EM630X10 06X30X10 25 0,3341EM850X10 08X50X10 25 0,6041EM860X30 08X60X30 25 1,2141EM1060X10 10X60X10 25 1,5241EM1060X30 10X60X30 25 2,17


Threaded fittings / Gewindefittings / Accessoires filetés

7 ● Threaded fittings / Gewindefittings / Accessoires filetés

50

Elbow 90º FF / bogen 90º I I / Coude 90º FF

Art. nr Size/Maß Euro / St224F9018 1/8" 1 1,50224F9014 1/4" 1 1,50224F9038 3/8" 1 1,72224F9012 1/2" 1 2,61224F9034 3/4" 1 2,75224F901 1" 1 4,63

224F90114 1 1/4" 1 7,24224F90112 1 1/2" 1 8,75224F902 2" 1 17,19

224F90212 2 1/2" 1 27,91224F903 3" 1 33,77224F904 4" 1 Consult us

Elbow 90º FM / bogen 90º IA / Coude 90º FM


224F92114 1 1/4" 1 8,47224F92112 1 1/2" 1 12,24224F922 2" 1 17,38

224F92212 2 1/2" 1 26,71224F923 3" 1 38,57224F924 4" 1 Consult us

Elbow 45º FF / bogen 45º I I / Coude 45º FF


224F120114 1 1/4" 1 7,27224F120112 1 1/2" 1 9,33224F1202 2" 1 14,99

224F120212 2 1/2" 1 28,16224F1203 3" 1 31,38224F1204 4" 1 Consult us

Tee banded / T-Stück / Té taraudé


224F130114 1 1/4" 1 10,03224F130112 1 1/2" 1 15,39224F1302 2" 1 18,83

224F130212 2 1/2" 1 38,00224F1303 3" 1 47,19224F1304 4" 1 72,83

Fig. 90

Fig. 92

Fig. 120

Fig. 130


51

Socket (Coupl ing) banded reducing / Reduziermuffe / Manchon de réduct ion

Art. nr Size/Maß Euro / St224F24014 1/4" x 1/8" 1 1,58224F24038 3/8" x 1/4" 1 1,99224F24012 1/2" x 3/8" 1 2,24224F24034 3/4" x 1/2" 1 2,75224F2401 1" x 3/4" 1 4,61

224F240114 1 1/4" x 1" 1 6,65224F240112X12 1 1/2" x 1/2" 1 8,21224F240112x1 1 1/2" x 1" 1 8,21224F240112 1 1/2" x 1 1/4" 1 8,21224F2402 2" x 1 1/2" 1 12,75

224F240212 2 1/2" x 2" 1 22,21224F2403 3" x 2 1/2" 1 29,44

Hexagon bushing FM / Sechskant-Reduzierstück IA / Réduct ion MF Hexagonal

Art. nr Size/Maß Euro / St224F24114 1/4" x 1/8" 1 1,64224F24138 3/8" x 1/4" 1 1,64

224F24112X14 1/2" x 1/4" 1 2,11224F24112 1/2" x 3/8" 1 2,11

224F24134X38 3/4" x 3/8" 1 2,71224F24134 3/4" x 1/2" 1 2,71

224F2411X12 1" x 1/2" 1 4,00224F2411X34 1" x 3/4" 1 4,00

224F241114X12 1 1/4" x 1/2" 1 5,37224F241114X34 1 1/4" x 3/4" 1 5,37224F241114X1 1 1/4" x 1" 1 5,37224F241112X34 1 1/2" x 3/4" 1 7,60224F241112X1 1 1/2" x 1" 1 7,60

224F241112X114 1 1/2" x 1 1/4" 1 7,60224F2412X1 2" x 1" 1 11,72

224F2412X114 2" x 1 1/4" 1 11,72224F2412X112 2" x 1 1/2" 1 11,72224F241212 2 1/2" x 2" 1 21,35224F2413 3" x 2 1/2" 1 33,56

Hexagon nipple reducing / Sechskant-Reduziernippel / Reduct ión MM Hexagonal

Art. nr Size/Maß Euro / St224F24514 1/4 x1/8" 1 1,54224F24538 3/8" x 1/4" 1 1,54

224F24512X14 1/2" x 1/4" 1 2,16224F24512 1/2" x 3/8" 1 2,16

224F24534X38 3/4" x 3/8" 1 2,43224F24534X12 3/4" x 1/2" 1 2,43224F2451X12 1" x 1/2" 1 3,28224F2451X34 1" x 3/4" 1 3,28

224F245114X12 1 1/4" x 1/2" 1 4,89224F245114X34 1 1/4" x 3/4" 1 4,89224F245114X1 1 1/4" x 1" 1 4,89224F245112X34 1 1/2" x 3/4" 1 6,22224F245112X1 1 1/2" x 1" 1 6,22

224F245112X114 1 1/2" x 1 1/4" 1 6,22224F2452X1 2" x 1" 1 9,88

224F2452X114 2" x 1 1/4" 1 9,88224F2452 2" x 1 1/2" 1 9,88

224F245212 2 1/2" x 2" 1 16,96224F2453 3" x 2 1/2" 1 24,97

Fig. 240

Fig. 241

Fig. 245


52

Socket (Coupl ing) p la in / Muffe / Manchon


224F270114 1 1/4" 1 6,92224F270112 1 1/2" 1 7,27224F2702 2" 1 11,94

224F270212 2 1/2" 1 30,99224F2703 3" 1 34,24224F2704 4" 1 Consult us

Hexagon nipple / Sechskant-Nippel / Mamelon hexagonal


224F280114 1 1/4" 1 5,19224F280112 1 1/2" 1 6,32224F2802 2" 1 9,46

224F280212 2 1/2" 1 18,38224F2803 3" 1 21,83224F2804 4" 1 Consult us

Hexagon plug, taper conical thread / Sechskant-Stopfen / bouchon Mâle conique


224F290114 1 1/4" 1 3,61224F290112 1 1/2" 1 4,92224F2902 2" 1 8,02

224F290212 2 1/2" 1 20,20224F2903 3" 1 21,83224F2904 4" 1 Consult us

Hexagon cup / Sechskant-Kappe / bouchon femel le hexagonal


224F300114 1 1/4" 1 5,05224F300112 1 1/2" 1 7,20224F3002 2" 1 9,81

224F300212 2 1/2" 1 22,66224F3003 3" 1 26,83224F3004 4" 1 Consult us

Fig. 270

Fig. 280

Fig. 290

Fig. 300


53

backnut / Sechskant-Mutter / Écrou hexagonal

Art. nr Size/Maß Euro / St224F31218 1/8" 1 Consult us224F31214 1/4" 1 0,95224F31238 3/8" 1 1,10224F31212 1/2" 1 1,49224F31234 3/4" 1 1,84224F3121 1" 1 2,42

224F312114 1 1/4" 1 3,32224F312112 1 1/2" 1 4,10224F3122 2" 1 6,28

224F312212 2 1/2" 1 Consult us 224F3123 3" 1 Consult us 224F3124 4" 1 Consult us

union conical jo int FF / Verschraubung IG / Raccord étanchéité conique femel le

Art. nr Size/Maß Euro / St224F34018 1/8" 1 Consult us 224F34014 1/4" 1 4,21224F34038 3/8" 1 4,27224F34012 1/2" 1 5,76224F34034 3/4" 1 7,55224F3401 1" 1 10,39

224F340114 1 1/4" 1 15,91224F340112 1 1/2" 1 23,86224F3402 2" 1 30,88

224F340212 2 1/2" 1 46,70224F3403 3" 1 47,91224F3404 4" 1 130,84

union conical joint MF / Verschraubung IG/AG / Raccord étanchéité conique MF

Art. nr Size/Maß Euro / St224F34118 1/8" 1 Consult us 224F34114 1/4" 1 4,40224F34138 3/8" 1 4,67224F34112 1/2" 1 6,02224F34134 3/4" 1 6,99224F3411 1" 1 11,76

224F341114 1 1/4" 1 16,41224F341112 1 1/2" 1 21,91224F3412 2" 1 30,41

224F341212 2 1/2" 1 49,04224F3413 3" 1 61,98224F3414 4" 1 81,29

Fig. 312

Fig. 340

Fig. 341


54

Hose nipple / Verschraubung IG/Schlauchanschluss / Adapteur Mâle cannelé Hexagonal


224F399114 1 1/4" 1 7,08224F399112 1 1/2" 1 9,90224F3992 2" 1 14,53

224F399212 2 1/2" 1 38,93224F3993 3" 1 Consult us 224F3994 4" 1 Consult us

Welding nipple from pipe / Anschweißnippel / Mamelon é souder


224F149114 1 1/4" 1 5,58224F149112 1 1/2" 1 6,79224F1492 2" 1 10,29

224F149212 2 1/2" 1 13,78224F1493 3" 1 21,91224F1494 4" 1 Consult us

Fig. 399

Fig. 149


Filinox, S.A.Sant Adrià, 76

E-08030 Barcelona, SpainT. +34 932 232 662F. +34 932 232 667

Editi

on M

ay 2

015

2015inoxidables.com/pressfitting/catalogos/instalpress2015.pdf2015 pressfitting and piping...

Documents