POOL POUCHPOOL BLASTER

TM

Swim Accessory Organizer

1-800-298-8800 or via fax at 1-800-488-0700or via the web at www.WaterTechCorp.com

Enclosed in the packaging of your Pool Pouch includes:1 Pool Pouch4 clear plastic support rods1 product set up guide

Product Set Up Guide

Should you have any problems or questions concerning your product you should contact Water Tech’s Customer Service

Division toll free in the U.S. at

TURN OVER FOR INSTRUCTIONS

CONGRATULATIONS on your purchase of the Pool Pouch, the quick and easy way to keep all of your pool accessories in one place! As with all Water Tech products, the Pool Pouch has been tested using our exacting quality control standards to ensure that you have received the highest qual-ity product available.

WARNING:To reduce the risk of injury or damage to your Pool Pouch please adhere to the following warnings:The Pool Pouch is NOT a toy and should not be played with or in. The hanging mechanisms cannot support the weight of a child and attempting to play in the pouch will result in damage to the unit and may result in injury. If the outer metal support ring protrudes from the fabric of the pouch, discontinue use IMMEDIATELY as serious eye injury can occur.Keep the Pool Pouch AWAY FROM OPEN FLAMES at all times. Failure to do so may result in damage to the pouch or injury. The Pool Pouch is not intended for use inside of pools.

Setting Up Your Pool PouchTo set up your Pool Pouch, follow these easy steps:

Hanging Your Pool PouchThe Pool Pouch has been designed with special hooks that will allow it to be hung from a variety of different structures. If hanging the Pool Pouch from an above ground pool , the clips can be attached to the inner lip of the molding encircl-ing the top of the pool as depicted. This method can also be used to attach the Pouch to chain link fencing or similar structures. If hanging the pool pouch from the side of an Intex pool or a structure where the attached straps can form a loop, the clips can be easily attached to the nylon bands located beneath the hanging strap as shown.

Step 1.Remove the Pool Pouch from the packaging and unfold the Pool Pouch allowing it to expand to its full size.

Step 2.Insert the included support tubes into the sleeves located in the four corners of the Pool Pouch. Two tubes in the top and two tubes in the bottom.

MaintenanceYour Pool Pouch can be easily maintained during use by rinsing with fresh water. If needed, the Pouch can be washed using soap and water. The Pool Pouch should be brought inside when the pool is not in use, especially during the inclement winter months.

Folding Up Your Pool Pouch When Not In UseTo fold the Pool Pouch simply twist into a figure eight, grab wired ring and tuck into each other until Pool Pouch is round. Insert back into polybag. IMPORTANT:Remove 4 clear support rods before folding Pool Blaster.

POOL POUCHPOOL BLASTER

TM

Swim Accessory Organizer

1-800-298-8800 or via fax at 1-800-488-0700or via the web at www.WaterTechCorp.com

Enclosed in the packaging of your Pool Pouch includes:1 Pool Pouch4 clear plastic support rods1 product set up guide

Product Set Up Guide

Should you have any problems or questions concerning your product you should contact Water Tech’s Customer Service

Division toll free in the U.S. at

TURN OVER FOR INSTRUCTIONS

CONGRATULATIONS on your purchase of the Pool Pouch, the quick and easy way to keep all of your pool accessories in one place! As with all Water Tech products, the Pool Pouch has been tested using our exacting quality control standards to ensure that you have received the highest qual-ity product available.

WARNING:To reduce the risk of injury or damage to your Pool Pouch please adhere to the following warnings:The Pool Pouch is NOT a toy and should not be played with or in. The hanging mechanisms cannot support the weight of a child and attempting to play in the pouch will result in damage to the unit and may result in injury. If the outer metal support ring protrudes from the fabric of the pouch, discontinue use IMMEDIATELY as serious eye injury can occur.Keep the Pool Pouch AWAY FROM OPEN FLAMES at all times. Failure to do so may result in damage to the pouch or injury. The Pool Pouch is not intended for use inside of pools.

Setting Up Your Pool PouchTo set up your Pool Pouch, follow these easy steps:

Hanging Your Pool PouchThe Pool Pouch has been designed with special hooks that will allow it to be hung from a variety of different structures. If hanging the Pool Pouch from an above ground pool , the clips can be attached to the inner lip of the molding encircl-ing the top of the pool as depicted. This method can also be used to attach the Pouch to chain link fencing or similar structures. If hanging the pool pouch from the side of an Intex pool or a structure where the attached straps can form a loop, the clips can be easily attached to the nylon bands located beneath the hanging strap as shown.

Step 1.Remove the Pool Pouch from the packaging and unfold the Pool Pouch allowing it to expand to its full size.

Step 2.Insert the included support tubes into the sleeves located in the four corners of the Pool Pouch. Two tubes in the top and two tubes in the bottom.

MaintenanceYour Pool Pouch can be easily maintained during use by rinsing with fresh water. If needed, the Pouch can be washed using soap and water. The Pool Pouch should be brought inside when the pool is not in use, especially during the inclement winter months.

Folding Up Your Pool Pouch When Not In UseTo fold the Pool Pouch simply twist into a figure eight, grab wired ring and tuck into each other until Pool Pouch is round. Insert back into polybag. IMPORTANT:Remove 4 clear support rods before folding Pool Blaster.