Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e1

2011 VW JETTA TDI CM6000 INSTALL

CanBus wires are orange/lt. green and orange/brown. They one picked up door triggers and trunk pin with firmware VW1.

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e2

2011 VW JETTA TDI CM6000 INSTALL

PTS Switch in the center console. To start the car you must put your foot on the brake and push the start button for five seconds.

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e3

2011 VW JETTA TDI CM6000 INSTALL

Remove the plug cover

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e4

2011 VW JETTA TDI CM6000 INSTALL

PTS wires Pin 1 Brown, Ground Pin 2 Purple/white, Dimmer Pin 3 Purple/yellow (-) start and stop 11.5mA draw on ign or start Pin 4 Purple/black (-) start and stop 10.2mA draw on ign or Start Pin 5, 6 open

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e5

2011 VW JETTA TDI CM6000 INSTALL

Transponder ring mounted to the steering column

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e6

2011 VW JETTA TDI CM6000 INSTALL

2 pin transponder ring

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e7

2011 VW JETTA TDI CM6000 INSTALL

Brake wire White/green (-)

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e8

2011 VW JETTA TDI CM6000 INSTALL

Brake wire location, master cylinder

Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s

responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with

regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.

Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.

Pag

e9

2011 VW JETTA TDI CM6000 INSTALL

Parking lights are at the headlight switch. Parking light wire is gray/red (+)