2009 catalog - casters, wheels and industrial handling (cwih)specialty casters wheels caster...
TRANSCRIPT
2009 Catalog
3
TABLE OF CONTENTS
Specialty Casters
Wheels
Caster Numbering System 13, 259000 Series 14EP-RP Series 15-16EW Series 17EW-EP Dual Wheel Series 18EY-EW-EP Single Wide Wheel Series 19EY Series 20G400 Series 20
Twin Wheel Casters 21Sockets 22-24Caster Numbering System 25Wheel Selection 26100-500 Series 27-28400-7700 Series 29-311400-3400 Series/Stainless Steel 32-36H1400-H3400 37-38
Caster Series
Wheel Selection Guide 39-40RT Wheels 41-42Dyna-Tred II TPR 42Dyna-Tred TPR 43Dyna-Tred PU 44Super K 45K Wheel 46Duro-Tred Vulcanized 47Vulcanized Rubber Tread 48
Cast Iron 49Sintered Iron 50Polyflex 51Duraflex 52Pneumatic 52Soft Rubber 53Hard Rubber 54Phenolic 55Wheel Bearings Selection 56
Pneumatic Air Faultless Casters 57Airline Conveyor/Air Cargo 58-59
Business Machine Casters 60Shock Absorbing Casters 61-62
Visual Caster Guide 4Accessories 5-6Caster Application 7-8
Caster Information 9-10Caster Mounting Application 11How to Select the Right Caster 12
VISUAL CASTER GUIDE
4 NSF®
Shock Absorbing Casters Low Profile
350 - 1,600 Lbs.Page 61
Airline ConveyorCasters
270 - 375 Lbs.Page 58-59
Twin Wheel Casters50 - 140 Lbs.
Page 21
Sockets &Brackets
Page 22-24
CasterAccessoriesPage 5-6
Some casters in this catalog are NSF approved. Please specify when ordering.
Heavy DutyH1400/H3400
420 - 1,800 Lbs.Page 37-38
Medium-HeavyDuty/Stainless Steel
1400/3400275 - 1,050 Lbs.
Page 32-36
Light-Medium Duty400/7700
100 - 400 Lbs.Page 29-31
General Duty100/500
90 - 450 Lbs.Page 27-28
HS/SH IndustrialSpring Action
900 - 1,200 Lbs.Page 62
Low Profile BusinessMachine Casters200 - 1,200 Lbs.
Page 60
Furniture Casters70 - 150 Lbs.Page 14-17
Institutional Casters70 - 325 Lbs.Page 18-20
Industrial WheelChoices
Pages 41-55
BearingSelectionPage 56
Air Faultless Casters300 - 450 Lbs.
Page 57
5
ACCESSORIESA
CC
ES
SO
RIE
S
Desc. Order No.Series 1400 32279Series S1400 32293
Grease Seal Kits
Rollock Brake Kits
Desc. Order No.21-22 E Brake Kit 32271
Side Friction Brake Kits
Desc.20 RB Kit21 RB Kit22 RB Kit400-3RB Kit400-31⁄2 RB Kit400-4 RB Kit400-5 RB Kit1400-4 RB Kit1400-5 RB Kit1400-6 RB Kit1400-8 RB Kit
Order No.3227232273322743228632284322753227632280322773227832281
Stainless Order No.-------
32294322953229632297
*
* Washer has been eliminated fromuse in 400 Series.
NOTE: Refer to page 29 for Rubber Expansion Sockets
Grease seal holds in lubricant,reduces friction for free swiveling incontaminated environments. Fieldmountable.
Effective gripping action across thetread keeps wheel from rolling. Fieldmountable. For use with Series E,400, 1400.
Cam style compression brake for usein E-Series Casters.
ACCESSORIES
6
NOTE: *New HX1400 Series Design Only.**Rigs not machined as standard.
Consult factory for availability.
Four Position Swivel Locks
Series 1400, H1400Cam-Style Brake Kit
Applies To: Order No.1400 46130 1400 - Foot Operated 46129H1400 46117
Cam-Style compression brake for useon 1400 and H1400 Series Casters.
Desc.1400, HH1400
Wheel WidthAll Sizes
21⁄2”
Order No.3228532268
Wheel Face/Total Lock Brake Kits
Desc.300-3 Kit400-31⁄2 Kit400-4 Kit400-5 Kit400-6 Kit1400-4 Kit1400-5 Kit1400-6 Kit 1400-8 Kit
Wheel Face BrakeOrder No.
4339742672426734267442675
Series 400, 1400
NOTE: 4” Cam Not Available.
Total LockOrder No.
32387323883238932390
Top activated brake kits for use withSeries 400 or 1400. Field mountableor factory installed.
Detachable four position lock instantlyconverts swivel casters to rigid. Fieldmountable.
AC
CE
SS
OR
IES
Position Lock Brake Kit
7
APPLICATIONSA
PP
LIC
AT
ION
S9000 Series 70-90 17EP-RP Series 90-150 18-19Plastic Caster Series 115-125 20EW Series 80-125 21EW-EP-EY Dual Whl Series 160-300 22EK Series 115-125 23K400 Series 200-300 23
EY Series 80-135 24G400 Series 175-325 24Twin Wheel 50-100 25, 26100-500 Series 90-450 32-33400-7700 Series 100-400 34-361400-3400/Stainless Series 300-1050 39-43H1400/3400 420-1800 44-45
Caster Series Cap./Lbs Page Caster Series Cap./Lbs Page
Cargo Carriers(Inverted Casters) 86,87Dollies 40, 44Engine Stands 52, 54, 64
Portable Stairways 50, 51Serving Carts 102Trailers (All Purpose) 52, 54, 64
Airlines
BakeriesBowl Trucks 39, 40Bread Trucks 39, 40Dish Trucks 38, 50Drum Dollies 39
Ingredient Bins 18, 19Platform Trucks 39, 44Refuse Containers 39, 44Transport Dollies 39, 44
Dept./Grocery/Chain Stores/FurnitureDisplay Racks & Bins 17, 18, 19, 21-23, 24, 26, 32, 38-40Floor Cleaning Equipment 18, 19, 34, 37Furniture Dollies 18, 19, 32, 34Furniture Handling Trucks 18, 19, 34, 39, 44, 50Garment Racks 18, 19, 21, 24Maintenance Trucks 34, 37, 39
Office Chairs 21, 25, 26Office Equipment Stands 17-19, 23-25Sorting Tables 17-19, 24, 32, 38, 40Stock Trucks 18, 19, 24, 34, 38, 40Trash Containers 39, 44, 48 50
Entertainment IndustryCamera Dollies 18, 19, 21-23, 37Lamps 17, 18, 19, 21-23, 25, 26
Packing Cases 32, 34, 37, 102, 106Platform Trucks 34, 37, 39
Freight TerminalsDollies 32, 34Platform Trucks 38, 40, 44, 45, 56, 58, 62, 64, 93Portable Conveyors 18, 19, 21-23
Tool Stands & Chests 34, 37, 39, 40, 44, 56, 58, 89Tow Line Trailers 39, 46, 52, 54, 60, 64
AutomotiveCreepers 24Diagnostic Equipment 20, 34, 37-38, 84Drum Dollies 18, 24, 34
Jacks 24, 39, 50Tire Racks 24, 34, 37Tool Stands & Chests 24, 34, 37
Hospital/Nursing Home/LaboratoriesBeds 111-116Cages (animal) 37, 43Carts (food, medicine) 16-21, 32-39House Keeping Carts 37, 39, 84Instrument Stands & Carts 18, 19, 24, 34IV Stands 24, 25,26
Lab Equipment 18, 19, 22,34, 37, 38Laundry Carts 34-45Overbed Tables 24, 25, 26Supply Carts 18, 19, 34, 37Trash Carts 34, 39, 50
APPLICATIONS
8
AP
PLIC
AT
ION
S
Marine IndustryBoat Dollies 62, 64Dry Dock Equipment 52, 54
Engine Stands 52, 54, 62, 64
Hotel/Motel/ResortsAudio Visual Carts 18, 19, 34Floor Cleaning Equipment 38, 42House Keeping Carts 34, 39, 50
Laundry Carts 34, 37,39, 84Luggage Carts 39, 84Maintenance Carts 34, 37, 39
Laundries/CleanersBaskets 32, 34Garment Racks 18, 19, 24, 34
Laundry Bins 34, 39
Manufacturing PlantsBattery Racks 50, 52Die & Fixture Trucks 39, 44, 50, 64Distribution Cages & Carts 18, 19, 34Drum Dollies 18, 24, 34Lubrication Equipment 18, 19, 24, 37Parts Carts 18, 19, 34, 37
Picker Carts 18, 19, 34, 37Platform Trucks 39, 44Scaffolds 85Tool Boxes 18, 19, 34, 38, 39, 89Towline or Pulled Trailers 39, 44, 50Welding Machines 24, 34, 37, 39
Offices/Schools/Libraries/Churches/BanksAudio Visual Carts 18, 19, 34Book Carts & Racks 18, 19, 34, 37, 39Chair & Table Racks 22, 32, 34, 37, 39Computer/Copier Stands 24, 25, 26Floor Cleaning Equipment 38, 42Janitorial Equipment 18, 19, 20, 24Laundry Carts 34, 37, 39, 84
Money Trucks 39, 50Mop Buckets 21, 24, 25, 26Office Chairs 21, 24,25, 26Pianos 22Portable Files 18, 22, 24Refuse Carts & Bins 34, 39
Processing PlantsCase Dollies 38-65Curing Racks 38-65Dollies 38-65Heavy Trucks 40-65Ice Trucks 40-65Mixers 40-65Packing Stands 38-65
Platform Trucks 40-65Production Equipment 38-65Sausage Trucks 38-65Tool Boxes 38-65, 91Towline Trucks 40-65Vats 40-65Waste Bins 40-65
RestaurantsBun Racks 18, 19, 32, 34Bus Carts 18, 19, 24Chairs 21, 24, 25, 26Dish Trucks 18, 19, 34, 37
Floor Cleaning Equipment 38, 42Milk Case Dollies 39Portable Bars 34, 39Tool Carts 18, 19, 34, 38, 39, 89
WarehousesDollies 32, 34Pick Carts 18, 19, 34, 37
Platform Trucks 39, 44Trailers 50-65
9
CASTER TERMINOLOGY
1. Overall Height - The vertical distance between the floor andthe mounting plane of the equipment.
2. Offset - The horizontal distance between vertical center linesthrough the kingpin and the wheel center. (Not shown in diagram.)
3. Swivel Radius - The horizontal distance from the verticalcenter line of the kingpin to the outside edge of the wheel tread.This dimension specifies the minimum distance required for thecaster to swivel 360° when mounted.
4. Wheel Diameter
5. Tread Width
Steering - Steering is affected by the type of wheel, tread, and swivel. Swivel offset is a factor in ease ofsteering. Too short a lead will increase steering effort, but too much lead can reduce load capacity and maycause wobble.
Dynamic or Rolling Load - The load imposed upon a caster or wheel while in motion.
Static Load - The load imposed upon a caster while it is stationary.
Impact Load - A momentary load imposed upon a caster or wheel when a load is dropped on the equipmentor it strikes an obstruction or experiences vibration.
Rollability - Rollability is the ease with which a wheel or caster can be rolled. Rollability is affected by wheelsize, type of tread and bearings. The larger the wheel, the easier it will roll. A hard, narrow crowned tread rollseasier than a flat, soft tread on a smooth floor, but may be hard on floors. Soft treads protect floors and passover floor obstructions more easily.
5
4 1
3
CA
ST
ER
INFO
RM
AT
ION
Reprinted 7/15/94 with the written permission of The Institute of Caster Manufacturers from “A Guide To Understanding And Specifying IndustrialCasters And Industrial Wheels”
CASTER PARTS &NOMENCLATURE
10
CA
ST
ER
INFO
RM
AT
ION
Top Plate - A horizontal plate for attaching a caster to equipment.
Kingpin (staked kingpin or nut & bolt assembly) - A threaded nut & bolt or staked assembly whichholds the swivel assembly together. The kingpin may also be an integral part of the top plate.Threaded kingpins can be adjusted to compensate for wear in the swivel assembly.
Swivel Horn Assembly - Consists of a swivel bearing unit. It does not include wheel, wheel bear-ings, washers, or spanner bushing components. The spanner bushing is a non-rotating sleeve ofseamless steel that fits over the axle and provides an inner raceway for wheel bearings. It strength-ens the caster by allowing the legs to be tightened against it.
Rigid Horn Assembly - Consists of a rigid or stationary horn unit. It does not include the wheel,wheel bearings, washers, or spanner bushing components.
Swivel Bearings - Swivel horn assemblies may be supplied with several styles of swivel bearings. For example:
1. Single Level Ball Race - A single row of balls in a large diameter ball raceway. (Faultless 100 Series)
2. Double Ball Race - Two rows of balls moving independently through two levels of ball races. (AllFaultless except 100 Series)
3. Ball Bearing Upper Race and Tapered Roller Thrust - A single row of balls in the upper racecoupled with a precision tapered roller bearing in the lower race.
4. Precision Upper Race and Lower Race Bearings - A self-contained precision load bearing for theupper race coupled with a precision tapered roller bearing in the lower race.
MOUNTING PLATE
MAIN LOAD BEARING(COMMERCIAL)
MAIN LOAD BEARING(COMMERCIAL)
KINGPINHORN
(SIDE MEMBER)
AXLE-BOLT AND NUT(WITH GREASE FITTING)
RETAINER
SPANNER BUSHING
BRAKE LEVER
NUT
Caster Assembly Breakdown
LOWER RETAINER
ROLLER BEARINGSLEEVE
ROLLER BEARING
WHEEL
BRAKE SHOE
BEARING ENDWASHER
11
CASTER MOUNTINGAPPLICATION
Swivel plate bolts orwelds to cross support
and floor truck.
Swivel plate bolts towood to inverted channeliron cross support and
floor truck.
Swivel plate bolts orwelds to angle iron
frame and corner brace.
Swivel plate bolts or weldsto angle iron frame andinverted cross supports.
Swivel plate bolts orwelds to U-beams used
as cross supports.
Stem caster with combination swivel andwheel brake protects
workmen on scaffolds.
Four swivel casters respondinstantly to directional change,making parking easy in limitedspace. Recommended for shortdistances, crowded conditions.
Two rigid casters at sides,two swivel casters at ends
make a highly maneuverabletruck that turns in its own
length.
Two rigid, one swivel caster make a maneuverabletriangle dolly for light loads.
Two V-grooved casters onangle-iron track and two
plain rigid casters rolling onmetal plate make an ideal
production line carrier.
Two swivel and rigid castersprovide easy steering over long
distances. Floor truck lockholds securely for loading orunloading, sets and releases
with a simple step-down.
HOW TO SELECTTHE RIGHT CASTER
12
Load + weight of truck ÷ number of casters = lbs. per casterFor example: 2000 lbs. ÷ 4 casters = 500 lbs. per caster
When Specifying or Replacing Casters,Answer These Seven Important Questions:
1. What is the average load and the maximum load?
2. What wheel type is needed for floor protection?
3. What wheel diameter will give the necessary mobility?
4. In what type of environment will the casters or wheels operate (water, oils, acids, corrosive materials, or excessive temperatures)?
5. Will the unit be hand-pushed or powered?6. How many swivel and how many rigid casters are needed?
7. How are the casters to be mounted? i.e. Top Plate, Stem, Hollow Kingpin, etc.
Divide combined weight of load and truck to get weight-per-caster.Faultless load ratings include a substantial safety factor. If a load isdropped onto a truck without regard for breakage, then specify the next higherload rating. Generally, select casters with extra load capacity rather than “justenough to get the job done.”
13
CASTER NUMBERINGSYSTEM
Institutional/Furniture Casters
ESeries
WMountingOptions
9Wheel
Material*
5Finish
11Size
RSuffix
TGSuffix
E - Double BallBearing (widevariety ofmountings)
9000 - Double BallBearing (lightduty plate mounting)
IT - Twin WheelCasters (TwinWheel MountingOptions includeH, W, Y, and P)
R - Rigid Caster
W - Wide Friction Band - Short(7/16” x 1-3/8”)
R - Wide FrictionBand - Long(7/16” x 2-1/32”)
K - Institutional Stem(multiple sizesavailable)
Y - Threaded Stem
P - Plate (multiple sizesavailable)
1 - Antique
2 - Black Oxidized
3 - Nickel
4 - Brass
5 - Zinc
8 - 1-5/8”
9 - 2”
11 - 2-1/2”
20 - 3”
21 - 4”
22 - 5”
R - Riveted Axle
M - White Wheel
W - Black Wheel
TG - Thread Guard
B&N - Bolt & Nut
B - Brake (Twin Wheels)
TB - Total Brake
SB - Side Brake
RB - Rollock Brake
1 - Dyna-Tred IITPR(Gray ThermoplasticTread)
3 - Plastic
4 - Rubber
6 - Polypropylene
7 - Hard Rubber
9 - Dyna-Tred II PU
EW9511RTG
FURNITURE CASTERS
14
47⁄6415⁄8
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
LoadRating(Lbs.)
OverallHeight
(In.) FinishCasterDesc.
OrderNo.
Soft RubberSoft RubberDyna-Tred IITPRSoft RubberDyna-Tred IITPR
29⁄32
25⁄825⁄8
319⁄32
319⁄32
ZincZincZincZincZinc
9458R9459BR9159R94520R91520R
2847228474284702848628488
7⁄8
3 13⁄16
2
Load Capacity 70-90 Lbs. Each CasterSeries 9000 Plate Casters
Double ball bearing swivel makes this aquality plate caster for flat-base furnituresuch as chests, cabinets, and lighterschool and hospital equipment.
Hard Rubber or Polypropylene wheels available on 2” and 3” sizes
3” wheel has a top plate size of 21⁄8” x 11⁄8”and like mounting hole spacing
Mounting Bolt Diameter — 3⁄16”
7080809090
CA
ST
ER
S
15
LIGHT DUTY
• TB — Dual brake available on 5” diametercaster. Locking of wheel and swivel for extra safety and stability
• Swivel Casters — Full-drawn horn provides both upper and lower raceways. Deep-drawn, corrugated top plate also forms mainload raceway
• Load Bearing — Two full, independent rows of hardened ball bearings roll in separateraceways for superior swiveling
• Kingpin — Fully annealed kingpin holdsraceways precisely in alignment
• Wheel Bearings — Self-lubricating and plain bearings are available
• Finish — Corrosion-resistant zinc
NOTE: Double Ball Raceway
13⁄429⁄16
27⁄8 to 335⁄8
Load Capacity 90-150 Lbs. Each CasterSeries EP-RP
Recommended for light assembly dolliesand trucks, bakery racks, portable files,tool boxes, display racks, and manyother uses.
Wheel Options
Hard Rubber Dyna-Tred IITPR
Soft Rubber Polypropylene
CA
ST
ER
S
16
OrderNo.
OPTIONS:1. RB for Rollock Brake2. SB for Side Brake3. TG for Thread Guard4. TB for Total Lock Brake — 5” only5. B & N — Bolt & Nut Axle standard6. R — Riveted axle optional
*Total Lock Brake overall height is 61⁄8”
Load Capacity 90-150 Lbs. Each CasterSeries EP- RP
Wheel Diameter (A) 3” 4” 5”Overall Height (B) 33⁄4” 413⁄16” 513⁄16”Swivel Radius (C) 23⁄4” 35⁄16” 315⁄16”Axle Size 1⁄4” 5⁄16” 5⁄16”
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
SwivelCasterDesc.
OrderNo.
RigidCasterDesc.
Soft RubberSoft RubberPolypropyleneHard RubberHard RubberDyna-Tred II TPRSoft RubberSoft RubberPolypropyleneHard RubberHard RubberDyna-Tred II TPRSoft RubberSoft RubberPolypropyleneHard RubberDyna-Tred II TPRDyna-Tred II TPR
PlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlain
909011010010090115115140140140115125125150150125125
EP4520EP4520RBEP6520EP7520EP7520SBEP1520EP4521EP4521RBEP6521EP7521EP7521SBEP1521EP4522EP4522RBEP6522EP7522EP1522EP1522TB*
299062990929814299222993629821299182992029815299552995629823299332993529831299522982529817
RP4520-
RP6520RP7520
-RP1520RP4521
-RP6521RP7521
-RP1521RP4522
-RP6522
-RP1522
-
31232-
2512631249
-3122131239
-2513331260
-3122331247
-25138
-31225
-
3 13⁄16
4 15⁄16
5 15⁄16
A
B
C A
B
Mounting Bolt Diameter — 5⁄16”
Side Brake Rollock Brake Thread Guards
Options
Total Lock Brake
CA
ST
ER
S
Load Capacity 80-125 Lbs. Each CasterSeries EW Stem Casters
*Standard Stem: 7⁄16” diameter, 13⁄8” long (Specify 5567-6)
**Standard Stem: 7⁄16” diameter, 117⁄32” long (Specify 5567-4)
Alternate Stem: 7⁄16” diameter, 1” long (Specify 5567-1)See page 28-29 for EW SocketsHard Rubber and Polypropylene wheels availableFriction Brake available (Suffix SB) (2”, 21⁄2”, 3”, 4”, 5”)Rollock Brake available (Suffix RB) (3”, 4”, 5”)
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
LoadRating(Lbs.)
OverallHeight
(In.) Finish
SwivelCasterDesc.
OrderNo.
Soft RubberSoft RubberDyna-Tred II TPRSoft RubberSoft RubberDyna-Tred II TPRSoft RubberSoft RubberDyna-Tred II TPRSoft RubberSoft RubberDyna-Tred II TPRSoft RubberDyna-Tred II TPR
808080808080909090115115115125125
217⁄32
217⁄32
217⁄32
31⁄32
31⁄32
31⁄32
31⁄231⁄231⁄245⁄845⁄845⁄855⁄855⁄8
NickelZincZincZinc
NickelZinc
NickelZincZinc
NickelZincZincZincZinc
EW439BR*EW459BR*EW159R*EW4511R*EW4311R*EW1511R*EW4320*EW4520*EW1520*EW4321**EW4521B&N**EW1521B&N**EW4522**EW1522**
3024730301301593018030191301863031730333303243037230345303923035730201
27⁄8
21⁄2 13⁄16
13⁄163
4
5
15⁄16
15⁄16
13⁄8
Friction Grip StemBore dimensions: 29⁄64” dia., 19⁄16” depth. Stem can be used with EW tube sockets or brackets.
7⁄16
DIA.
3⁄4
CA
ST
ER
S
Double ball bearing construction assures easyswiveling for heavy furniture, appliances, equip-ment, or point-of-purchase displays. Friction-gripstem can fit directly into cast aluminum, moldedplastic, or pressed-steel chair bases. Also usedwith EW brackets for angle-iron legs and steel,plastic, and RT sockets for tubular metal legs.
17
FURNITURE CASTERS
18
INSTITUTIONALCASTERS
CA
ST
ER
S
Friction Grip Stem: 7⁄16 x 1-17⁄32
Bore dimensions: 29/64” dia., 1-9/16” depth. Stem can be used with EW tube sockets or brackets.
*Use with W98 Socket**Top Plate: 2-9/16” x 3-5/8”
Bolt Holes: 1-3/4” x 2-7/8” to 3”
NOTE: Side Brake Available.
Load Capacity 160-275 Lbs. Each CasterSeries EW-EP Dual Wheel Casters
Ideal for pianos and equipment. Combines highload capacity with excellent mobility and floorprotection. Full double ball bearing constructionprovides easy swiveling and long service life.
EWEP
WheelDiameter
(In.)
TreadWidth(In.)
WheelMaterial
LoadRating(Lbs.)
OverallHeight
(In.) FinishCasterDesc.
OrderNo.
Soft RubberSoft RubberHard RubberHard Rubber
160160275275
223⁄32
227⁄32
227⁄32
223⁄32
Copper OxideCopper Oxide
ZincZinc
EW479-2*EP479-2**EP759-2**EW759-2*
30373299412996030475
2 7⁄8
INSTITUTIONALCASTERS
Socket No. EDP No.W98 38353
Piano Sockets
For EW Series Dual Wheel Piano Casters.Socket bore 9⁄16” x 11⁄2” depth. 21⁄8” diametertrackplate.
Load Capacity 220-300 Lbs. Each Caster
Ideal for point of purchases displays and low pro-file computer equipment. These casters combinehigh load capacity with excellent mobility and floorprotection. Full double ball bearing constructionprovides easy swiveling and long service life.
WheelDiameter
(In.)
TreadWidth(In.)
WheelMaterial
LoadRating(Lbs.)
OverallHeight
(In.) FinishCasterDesc.
OrderNo.
PolypropylenePolypropylenePolypropylenePolypropylenePolypropylene
220220300300300
27⁄ 32
21⁄8
227⁄32
23⁄ 4
23⁄ 4
ZincZincZincZincZinc
HXEP658R*HXEY658R**HXEP659R*HXEY659R**HXEW659R***
31157258363115425843311492 111⁄16
15⁄8 111⁄16
*Top Plate: 2-9⁄16” x 3-5⁄8” Bolt Hole: 1-3⁄4”x 2-15⁄16”; **Thread Stem: 1⁄ 2” x 13 x 1-1⁄ 2”;***Friction Grip Sem: 7⁄16” x 1-17⁄32”.
Contact factory for brake options.
19
CA
ST
ER
S
Series EY-EW-EP Single Wide Wheel Casters
INSTITUTIONALCASTERS
20
Inst
itutio
nalC
aste
rsC
AS
TE
RS
Load Capacity 80-135 Lbs. Each CasterSeries EY Casters
Series G400 (Threaded Stem Casters)Load Capacity 175-325 Lbs. Each CasterThis Faultless caster offers the smooth, quiet swiveling made possible bydouble ball bearing construction. Threaded stem attaches to wire grocerytrucks, brackets, plugs, legs, etc. Corrosion-resistant zinc finish.
WheelDia.(In.)
TreadWidth(In.)
WheelMaterialSoft RubberSoft RubberSoft RubberDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PURT WheelRT WheelRT WheelRT WheelSoft RubberSoft RubberDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PURT WheelRT WheelRT WheelRT Wheel
WheelBearing
AxleSize(In.)
LoadRating(Lbs.)
OverallHeight
(In.)
SwivelCasterDesc.
G421-3G421-4G421-4RBG490-4G490-4RBG493-4TGG493-4RBTGG499-4TGG499-4RBTG G464W-4G464W-4RBG465W-4G465W-4RBG421-5G421-5RBG490-5G490-5RBG493-5TGG493-5RBTGG499-5TGG499-5RBTGG464W-5G464W-5RBG465W-5G465W-5RB
OrderNo.
PlainPlainPlainDelrinDelrin
PrecisionPrecisionPrecisionPrecision
DelrinDelrinRollerRollerPlainPlainDelrinDelrin
PrecisionPrecisionPrecisionPrecision
DelrinDelrinRollerRoller
3⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄83⁄8
175200200225225225225275275300300300300200200250250250250300300325325325325
33⁄447⁄847⁄847⁄847⁄847⁄847⁄847⁄847⁄847⁄847⁄847⁄847⁄8666666666666
25565255902547824980249812520025201249272492824892248932489524896255582556024982249832601226013252022520324898248992490124902
3
4
11⁄4
5
11⁄4
11⁄4
Stem Dimensions: 1⁄2 - 13x11⁄2” standard. Other stem dimensions available. High Temperature version available. Contact factory. (RB- Rollock Brake) (WFB - Wheel Face Brake)
11⁄2
11⁄2
Double ball bearing design makes the easy-swiveling Series EY idealfor metal furniture, carts, racks, appliances and more. Machine-threadedstems are available in made-to-order custom sizes.
Note: R — Riveted Axle Brake Options available on most items. *Stem Size 3⁄8 - 16x11⁄2” **Stem Size 1⁄2 - 13x11⁄2”Hard Rubber and Polypropylene wheels available.
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
Soft RubberDyna-Tred II TPRSoft RubberDyna-Tred II TPRSoft RubberHard RubberDyna-Tred II TPRSoft RubberHard RubberDyna-Tred II TPR
WheelBearing
AxleSize(In.)
LoadRating(Lbs.)
OverallHeight
(In.)
SwivelCasterDesc.
EY459R*EY159R*EY4520*EY1520*EY4521**EY7521**EY1521**EY4522**EY7522**EY1522**
OrderNo.
PlainPlainPlainPlainPlainPlainPlainPlainPlainPlain
1⁄41⁄41⁄41⁄4
5⁄165⁄165⁄165⁄165⁄165⁄16
80809090115125115125135125
217⁄32
217⁄32
31⁄231⁄2
411⁄16
411⁄16
411⁄16
523⁄32
523⁄32
523⁄32
30648305393071930738307643084330771307973084230807
2
3
4
7⁄8
13⁄16
15⁄16
5 15⁄16
3⁄4
21
TWIN WHEEL CASTERS
A
B
C
D
Nylon hooded caster offers designer stylingcombined with economy. Independent wheelrotation adds to its already high controlledmobility from deep pile carpeting to slick tile.Meets or exceeds BIFMA Standards.
Load Capacity 50-100 Lbs. Each CasterTwin Wheel Casters
Dia.(mm)
LoadRating (Lbs.)
OverallHeight (In.)
HornFinish
CasterDesc.
OrderNo.
Stem Caster for Wood Furniture (A)4050505050
Friction Grip Stem (B)5050506060
4050505060
50
5090909090
909090100100
50909090100
90
25⁄32
21⁄221⁄221⁄221⁄2
21⁄221⁄221⁄223⁄423⁄4
21⁄2
BlackBlackBrass
AntiqueChrome
BlackBrass
ChromeBlack
Chrome
BlackBlackBrass
ChromeBlack
IT332HN-40IT332HN-50IT334HN-50IT331HN-50IT33SSHN-50
IT932HN-40IT932HN-50IT934HN-50IT93SSHN-50IT932HN-60
ITW32HN-50ITW34HN-50ITW3SSHN-50ITW32HN-60ITW3SSHN-60
ITW32EHN-50
4810448425480464842148050
4618048044460444545045457
46260Black
A B
Standard Top Plate (C)27⁄32
211⁄16
211⁄16
211⁄16
215⁄16
38mm Barrel, Friction Grip Stem (D)
C
119⁄32
.281 DIA.
.295 DIA.
17⁄16
DIA.
Wood Stem Friction Grip Stem
Top Plates Optional Top Plate
4810648039480414804348414
CA
ST
ER
S
1”
SPECIAL SOCKETS
22
Pipe-Thread Socket
Dia. (In.) Base (In.) Socket Desc. Order No.3⁄4 1 W44 39549
Hole Diameter (In.) Depth (In.) Description Caster Series Socket Desc. Order No.3⁄8 15⁄8 3⁄4” Toothed Trackplate Wood Stem 505GN 38372
Spring Steel Grip Neck Sleeve
Designed for wood applications, thesesteel sockets hold grip neck stemcasters securely.
Use with EW stem caster.
No. 81 Flat BracketNo. 52 Welded ForInside Angle Iron
No. 48 Bolted ForOutside Angle Iron
No. 49 Bolted ForInside Angle Iron
Steel Brackets for EW Series Casters
Order No. 39555 Order No. 39554 Order No. 42264 Order No. 39568
139⁄64
15⁄16
.295
3⁄8
113⁄16
11⁄64
.295
3⁄8
15⁄8
13⁄8
.295
1.43829⁄32
139⁄64
3⁄8 3⁄8
SO
CK
ET
SBolted on or welded, Faultless steelbrackets adapt EW Series casters toa wide variety of channel or angle-iron legs.
23
SOCKETS
53 54RT P120
SO
CK
ET
SRound Tubular
P/E — PolyethyleneP/P — PolypropyleneRT — Reinforced Thermoplastic
Tube Minimum HoleGage ID (IN.) OD (In.) Caster Series Depth (In.) Material Socket Desc. Order No.
17 0.571 0.6875 ER 2.25 Steel 53R 4224817 0.571 0.687 EW 2.25 Steel 54 3839311 0.578 0.687 X, EX 1.625 P/E X701 4348116 0.62 0.75 EW 2.25 Steel 79 3956418 0.777 0.875 ER, EW 1.812 P/E P120 4344118 0.777 0.875 ER, EW 2.125 RT RT120RD 4340013 .872 1.062 ER, EW 1.25 P/E P123 4344612 0.844 1.062 ER, EW 1.25 P/E P124 4344713 0.872 1.062 ER, EW 2.125 RT RT123RD 4340118 0.902 1 ER, EW 1.812 P/E P125 4348618 0.902 1 ER, EW 2.125 RT RT125RD 4340311 1.072 1.312 ER, EW 2.125 RT RT126RD 4340416 1.12 1.25 ER, EW 2.125 RT RT127RD 4340513 1.31 1.5 ER, EW 2.125 RT RT1310RD 4351516 1.37 1.5 ER, EW 2.125 RT RT1370RD 4340916 1.495 1.625 ER, EW 2.125 RT RT1495RD 43520
SPECIAL SOCKETS
24
P/E — PolyethyleneRT — Reinforced Thermoplastic
Square Tubular
RT EW4689
• Faultless plastic sockets are designed to retain casters in a wide variety of wood and metal furniture, appliances, and equipment.
• Sockets absorb side thrust shocks, deaden noise, and will not rust.• Metal sockets and brackets are zinc plated to resist rust.• R.T. sockets are constructed of reinforced thermoplastic which is virtually
indestructible with EW and ER Series Swivel Casters.
TubeGage ID (In.) OD (In.) Caster Series
Minimum HoleDepth (In.) Material Socket Desc. Order No.
161816
.080 Wall181811161818718
0.620.6520.870.880.9020.9021.011.121.1521.1521.141.402
0.750.75
11.04
11
1.251.251.251.251.51.5
ER, EWER, EW
EWER, EWER, EW
ERER, EWER, EWER, EWER, EWER, EWER, EW
2.1252.1251.3122.1252.1251.8752.1252.1252.1252.1252.1252.125
RTRTP/ERTRTP/ERTRTRTRTRTRT
RT620SQRT650SQEW4689SQRT880SQRT902SQER4983SQRT1010SQRT1120SQRT1150BSQRT1150SQRT1140SQRT1400SQ
435314353043484435074225443491435164351743522435214351843519
SO
CK
ET
S
Socket Desc. Order No. Fits Round Tube Size I.D. Tube Size (In.) Fits Stem Size (In.)RX1000RX1250RX1500RX1620
41482414834148441485
1” - 16 GA11⁄4” - 16 GA11⁄2” - 16 GA15⁄8” - 16 GA
.870 - 1.01.120 - 1.251.375 - 1.5
1.495 - 1.625
1⁄ 2 - 13 x21⁄ 8 - 21⁄41⁄ 2 - 13 x21⁄ 8 - 21⁄41⁄ 2 - 13 x21⁄ 8 - 21⁄41⁄ 2 - 13 x21⁄ 8 - 21⁄4
Socket Desc. Order No. Fits Square Tube Size I.D. Tube Size (In.) Fits Stem Size (In.)SX1000SX1250SX1500SX1620
41486414874148841489
1” - 16 GA11⁄4” - 16 GA11⁄2” - 16 GA15⁄8” - 16 GA
.870 - 1.01.120 - 1.251.375 - 1.5
1.495 - 1.625
1⁄ 2 - 13 x21⁄ 8 - 21⁄ 41⁄ 2 - 13 x21⁄ 8 - 21⁄ 41⁄ 2 - 13 x21⁄ 8 - 21⁄ 41⁄ 2 - 13 x21⁄ 8 - 21⁄ 4
Rubber Expansion
Note: Expansion Sockets to be used with 1/2 - 13 threaded stem casters.
25
Caster NumberingSystem
Industrial Duty
A — Special TopPlate Size
C — Swivel StemCaster with Brake
D — Special TopPlate Size
G — Threaded Stem
H — Heavy Duty
K — Swivel Stem
N — NSF Approved
SHX — Spring Action
S — Stainless Steel
1 —Swivel
5 — Rigid
3 — Swivel
97 — Rigid
4 — Swivel
77 — Rigid
47 — Rigid
14 — Swivel
34 — Rigid
12 — Swivel
32 — Rigid
13 — Swivel
33 — Rigid
15 — Swivel
35 — Rigid
16 — Swivel
36 — Rigid
8 — Swivel
87 — Rigid
06 — Semi-Steel — Roller Bearing07 — Forged Steel Wheel — Tapered Bearing08 — Powdered Iron — Plain Bore16 — Mold-on Rubber Balloon — Ball Bearing18 — Mold-on Rubber — Roller Bearing19 — Pneumatic — Ball Bearing21 — Soft Rubber 27 — Hard Rubber 30 — Phenolic — Delrin or Plain Bearing31 — Phenolic — Roller Bearing35 or 35H — Glass Filled Nylon — Roller Bearing38HD — Heavy Duty Mold-On Polyurethane—Roller Bearing38HDT — Heavy Duty —Tapered Roller Bearing38 — Mold-on Urethane — Roller Bearing40 — K-Wheel® — Delrin Bearing41 — K-Wheel® — Roller Bearing41B—Super K-Wheel® — Precision Ball Bearing41T—Super K-Wheel® — Tapered Roller Bearing42 — K-Wheel® — Plain Bore43 — K-Wheel® — Precision Ball Bearing60 — Polypropylene Ribbed — Plain Bearing61 — Polypropylene Ribbed — Roller Bearing60S— Polypropylene — Straight Sided — Plain Bore61S— Polypropylene — Straight Sided — Roller Bearing64W or 64W-HT — Reinforced Thermoplastic — Plain Bearing65W or 65W-HT — Reinforced Thermoplastic — Roller Bearing67W or 67W-HT — Reinforced Thermoplastic — PrecisionBearing81 — Duraflex — Roller Bearing82 — Duraflex — Ball Bearing90 — Dyna-Tred (TPR) — Delrin Bearing91 — Dyna-Tred (TPR) — Roller Bearing92 — Dyna-Tred (TPR) — Ball Bearing93 — Dyna-Tred (TPR) — Precision Ball Bearing96 — Dyna-Tred (PU) — Delrin Bearing97 — Dyna-Tred (PU) — Ball Bearing98 — Dyna-Tred (PU) — Roller Bearing99 — Dyna-Tred (PU) — Precision Ball Bearing
221⁄23
31⁄2456810121416
B — Variation fromstandardwheel
BM — Black OxideFinish
B&N — Bolt & Nut Axle
CDX — “Condux”(Conductive)
CT — Zinc Dichromate Finish
GS — Grease Seal
GSS — Grease Seal Swivel Only
GSW — Grease Seal Wheel Only
PL2 — 2 PositionLock
PL4 — 4 PositionLock
R — Riveted Axle
RB — Rollock Brake
SB — Side Brake
S — Stainless Steel
TG — Thread Guard
TB — Total Brake
TSB — Thumb ScrewBrake
V — V-GroovedWheel
WFB — Wheel FaceBrake
WFCB— Wheel FaceContact Brake
ZC — Zinc
HXPrefix Letter
14Rigid or SwivelConstruction
41BKind of Wheel and Bearing
8Wheel
Diameter
TSBSuffix Options
Faultless manufactures industrial casters in many types, sizes, and styles — some 10,000 differ-ent items in all. To identify them, we’ve developed an alpha-numerical Industrial CasterNumbering System. The illustration breaks down one caster number into its component parts, soyou can see how it works. The chart lists other letters and numbers, and what each one means.
26
Dyna-Tred TPR
Thermoplastic rubber resistschemicals, high temperatures,and wear. Tough polypropylenehub won’t dent, mar, or stain.(Gray Tread)D - 65-70A, TR -40°F to +180°F
* Also Available Super SoftVersion - 55A
Four PositionSwivel Lock
Cam-Style Brake Rollock Brake Grease Seal
Wheel Selection
Semi-Steel
Cast iron toughened withsteel, this wheel has a highload rating and exceptionallylong wear life. Recommendedfor wood and concrete floors.D - N/A, TR -40°F to +800°F(With optional hightemp grease)
Mold-on Rubber(Vulcanized
Rubber Tread)
Cushioned rubber treadpermanently vulcanized to asemi-steel core isrecommended for quietmovement with heavy loads.D - 75A, TR -40°F to +158°F
Phenolic(Plaskite)
Phenolic compound rein-forced with macerated fabricmakes a high-strength, high-impact wheel resistant to oil,gasoline, even dilute acids.D - 75D, TR -40°F to +300°F
Mold-onPolyurethane(Duro Tred)
Polyurethane treadpermanently vulcanized to asemi-steel core delivers acushioned ride, excellentmobility, and long wear underheavy loads.D - 95A, TR -40°F to +180°F
K-Wheel
High-strength solid urethanewithstands extremetemperatures. Load charac-teristics of steel with smoothride. Steam cleanable. Alsoavailable with PrecisionBearing.D - 55D, TR -50°F to +230°F
Polypropylene(Polyflex)
Polypropylene wheel is light inweight, low in cost, high inimpact strength. It resists waterand chemical absorption, with-stands steam cleaning.D - 60D, TR -20°F to +180°F
RT
Unique waffle design, special-ly blended reinforced thermo-plastic material and specificprocessing make for adurable, high performance,cost effective wheel.D - 65D, TR -20°F to +250°FHigh Temp:D - 65D, TR -20°F to +480°F
Dyna-Tred PU
High-load capacity and extend-ed wear. Polyurethane resistschemical absorption. Toughpolypropylene hub won’t dent,fade, or stain. (Red Tread) D - 100A, TR -40°F to +180°F
Duraflex
Solid cushion tire is punctureproof and impact resistant.Tire is mounted on a rugged corrosion freepolypropylene hub. D - 75A, TR -40°F to +158°F
Options
Total LockBrake
Pneumatic
Tube-type, pressurized tirecombines shock absorptionwith quiet operation andeasy rolling.TR -40°F to +158°F
D — Denotes Durometer Hardness TR — Denotes Temperature Range
27
GENERAL DUTY
• Swivel Casters — Horn and bearing raceway are formed from a single piece of heavy- gauge steel, deeply corrugated to withstand stress and prevent distortion under full rated load
• Load Bearing — Single row of hardened, polished ball bearings roll freely in a large-diameter, lubricated raceway
• Kingpin — Riveted and coined for durability in rated service
• Wheel Bearings — Plain sealed ball bearings and precision bearings
• Finish — Corrosion-resistant zinc
Load Capacity 90-450 Lbs. Each Caster
Series 100-500
WheelDia. (In.)
(A)
OverallHt. (In.)
(B)
AxleSize(In.)
SwivelRadius (In.)
(C)
100 Series SwivelSize of Top
Plate (In.) (DxE)Mounting Hole
Spacing (In.) (FxG)
MountingBolt Dia. (In.)
Swivel & Rigid
500 Series RigidSize of Top
Plate (In.) (DxE)Mounting Hole
Spacing (In.) (FxG)2
21⁄234
21⁄233⁄16
313⁄16
5
1⁄45⁄163⁄87⁄16
111⁄16
21⁄423⁄833⁄16
17⁄8x29⁄16
23⁄4x313⁄16
31⁄8x41⁄84x51⁄8
15⁄16x21⁄813⁄4x3
23⁄8x33⁄8to37⁄16
3 x 4
1⁄45⁄165⁄163⁄8
11⁄2x221⁄32
21⁄4x47⁄16
21⁄2x415⁄16
31⁄8x61⁄4
15⁄16x21⁄811⁄16x31⁄213⁄16x413⁄4x5
E
F D
G
100
EG
F D500
A
B
AC
B
Recommended for general warehouse andfactory applications such as furniture dollies,laundry carts, bakery racks, and tool boxes; agood combination of strength, durability, andeconomy.
CA
ST
ER
S
28
Load Capacity 90-450 Lbs. Each CasterSeries 100-500
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
SwivelCasterDesc.
OrderNo.
RigidCasterDesc.
OrderNo.
Dyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUSintered IronSoft RubberSoft RubberHard RubberHard RubberPolypropyleneSintered IronSoft RubberSoft RubberHard RubberHard RubberPolypropyleneSintered IronDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUDyna-Tred PUSoft RubberSoft RubberHard RubberHard RubberPhenolicPhenolicPhenolicPolypropyleneSoft RubberSoft RubberHard RubberHard RubberPolypropyleneSintered IronSoft RubberHard RubberPhenolic
DelrinDelrinDelrinDelrinPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainDelrinDelrin
PrecisionDelrinDelrin
PrecisionPlainPlainPlainPlainPlainRollerRollerPlainPlainPlainPlainPlainPlainPlainPlainPlainRoller
9090
1001001509090
150150150200100100200200200300180180180225225225175175270270300300300270225225350350350450240420450
190-2R190-2RSB196-2R196-2RSB108-2R121-2R121-2RSB127-2R127-2RSB160-2R108-21⁄2 R121-21⁄2 R121-21⁄2 SB B&N127-21⁄2 R127-21⁄2 SB B&N160-21⁄2 R108-3R190-3R190-3SB B&N193-3RTG196-3R196-3SB199-3RTG121-3R121-3SB B&N127-3R127-3SB B&N130-3 B&N131-3 B&N131-3TG B&N160-3R121-4R121-4SB B&N127-4R127-4SB B&N160-4R108-4R121-4BR127-4BR131-4 B&N
25030248562487324874250282508225086251242512525190250362508325160251282513125188250492486724868248702487524876248782509125095251362515125174251792518025189250982509625149251762519125057251002515325181
590-2R-
596-2R-
508-2R521-2R
-527-2R
-560-2R508-21⁄2 R521-21⁄2 R
-527-21⁄2 R
-560-21⁄2 R508-3R590-3R
-593-3RTG596-3R
-599-3RTG521-3R
-527-3R
-530-3 B&N531-3 B&N531-3TG B&N560-3R521-4R
-527-4R
-560-4R508-4R521-4BR527-4BR531-4 B&N
24922-
24914-
2570525748
-25783
-258272570925749
-25785
-258282571324915
-2491724916
-2491825752
-25787
-2581225814258152582925756
-25790
-2583025717257602579325818
2
11⁄8
3
1
21⁄2
15⁄16
4
11⁄4
15⁄8
1
13⁄16
13⁄8
11⁄4
NOTE: Brakes not available on precision bearing wheels
3⁄4
SIDE BRAKE* THREAD GUARD*
Options
*Side Brake: Foot-operated friction brake positivelylocks wheel; suffix “SB”*Thread Guard: Large diameter thread guards preventloose threads and lint from binding wheel; suffix “TG”
29
LIGHT MEDIUM DUTYC
AS
TE
RS
Load Capacity 100-400 Lbs. Each Caster
• Swivel Casters — Heavy-gauge steel top plate is attached to a full-drawn steel horn with hardened raceways
• Load Bearings — Two full, independent rows of hardened, polished ball bearings roll freely in large-diameter, lubricated raceways
• Kingpin — Fully annealed kingpin holds raceways precisely in alignment
• Wheel Bearings — Plain sealed ball bearingsand precision bearings
• Finish—Corrosion-resistant zinc
Recommended for tool boxes, bakeryracks, dollies, stock trucks, hotel trucks,and other institutional uses requiringgood mobility.
Series 400-7700
Hard rubber
K-Wheel
Polypropylene
RTDyna-Tred TPRGrey Tread
Dyna-Tred PUDark Grey Tread
Wheel Options
Soft Rubber
30
Load Capacity 100-400 Lbs. Each CasterSeries 400-7700
Optional Top Plates: Add “A” or “D” prefix to caster number - Ex: A421-3
D 400D 4700
OPTIONS:1. Rollock Brake (Add RB Suffix - Ex: 496-4RB) 31⁄2”, 4”, 5” Swivel Casters only.2. Thread Guards (Add TG Suffix - Ex: 427-4SB)3. Side Brake (Add SB Suffix - Ex: 496-4TG)4. Wheel Face Brake (Add WFB Suffix - Ex: 496-4WFB)
NOTE: Wheel Face Brake should not be used with High Temperature RT Wheel Casters.Bolt and Nut Axle assembly standard on this product line.
Mounting Bolt Dia. — 5⁄16”Axle Size — 3⁄8”; *21⁄2x11⁄8 axle size is 5⁄16”
33⁄425⁄8to 3
3 to 35⁄845⁄8
A 400A 4700 31⁄8
23⁄8
313⁄32
41⁄8
13⁄427⁄8
215⁄16
35⁄8 400
OPTIONAL TOP PLATES
Wheel Diameter (A)Overall Height (B)Swivel Radius (C)
21⁄2”35⁄16”23⁄8”
3”313⁄16”23⁄4”
31⁄2”43⁄4”33⁄16”
4”5”
37⁄16”
5”61⁄8”
315⁄16”
6”71⁄16”43⁄8”
AC
B
A
B
41⁄837⁄8215⁄16
215⁄1613⁄47700
13⁄421⁄2
215⁄16
35⁄8 400*
*This top plate is also used on H400
Side Brake Rollock Brake
Options
Wheel FaceBrake
3-1/2”, 4”, 5”Sizes
2-1/2”, 3”sizes
Thread Guard*
*Side Brake: Foot-operated friction brake positively locks wheel; suffix “SB”*Thread Guard: Large diameter thread guards prevent loose threads and lint from binding wheel; suffix “TG”
31
2
Load Capacity 100-400 Lbs. Each CasterSeries 400-7700
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
SwivelCasterDesc.
OrderNo.
RigidCasterDesc.
OrderNo.
Soft RubberHard RubberPolypropyleneSoft RubberHard RubberK-WheelPolypropyleneDyna-Tred TPRDyna-TredTPRDyna-Tred PUDyna-Tred PUDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUSoft RubberSoft RubberHard RubberHard RubberHard RubberPolypropyleneRT Wheel - StandardRT Wheel - High Temp.Soft RubberSoft RubberHard RubberHard RubberK-WheelPolypropyleneDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUPolypropyleneRT Wheel - StandardRT Wheel - High Temp.RT Wheel - High Temp.Soft RubberSoft RubberHard RubberHard RubberK-WheelPolypropyleneDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PURT Wheel - StandardRT Wheel - High Temp.PolypropylenePolypropyleneDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PU
PlainPlainPlainPlainPlainPlainPlainDelrin
PrecisionDelrin
PrecisionDelrin
PrecisionDelrin
PrecisionPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainDelrin
PrecisionDelrin
PrecisionPlainPlainPlainPlainPlainPlainPlainPlainPlainPlainDelrin
PrecisionDelrin
PrecisionPlainPlainPlainPlainDelrin
Sealed BallDelrin
Sealed Ball
100200200175270270270180180225225225225250250200200275275275275400400200200275275400300250250300300350400400400200200300300400350300300325325400400400400325325350350
421-21⁄2427-21⁄2460-21⁄2421-3427-3442-3460-3490-3493-3TG496-3499-3TG490-31⁄2493-31⁄2TG496-31⁄2499-31⁄2TG421-31⁄2A421-31⁄2TG427-31⁄2A427-31⁄2D427-31⁄2460S-31⁄2464W-31⁄2464W-HT-31⁄2421-4A421-4427-4A427-4442-4460S-4490-4 493-4TG496-4499-4TGA460S-4464W-4464W-HT-4A464W-HT-4421-5A421-5427-5A427-5442-5460S-5490-5 493-5TG496-5499-5TG464W-5464W-HT-5460-5460-5RB490-6492-6496-6497-6
25424254472543624578254512536125518258722587325874258752565525910256582591125408254962551025511255312594025884258812541325532254602551425362254752565625916256592591725465258852588225890255332553025467255062536425519256572592825660259292588625883259372597125743259382597925706
7721-21⁄27727-21⁄27760-21⁄27721-37727-37742-37760-37790-37793-3TG7796-37799-3TG7790-31⁄27793-31⁄2TG7796-31⁄27799-31⁄2TG7721-31⁄2A4721-31⁄2TG7727-31⁄2A4727-31⁄2D4727-31⁄27760S-31⁄27764W-31⁄27764W-HT-31⁄27721-4A4721-47727-4A4727-47742-47760S-47790-47793-4TG7796-47799-4TGA4760S-47764W-47764W-HT-4
-7721-5A4721-57727-5A4727-57742-57760S-57790-57793-5TG7796-57799-5TG7764W-57764W-HT-57760-5
-4790-64792-64796-64797-6
251102511125112251132511425115251162743627437274332743427274271692727727170251182720725119272082723527191274302742727280272132509927307251022510527275272332727827234272092743127428
-27281273102510927313272992729327276273112727927312274322742927392
-27257272512724027241
21⁄2 11⁄8
3 11⁄4
31⁄2 15⁄16
11⁄4
11⁄2
4
11⁄2
11⁄2
5
13⁄86
11⁄4
11⁄4
Other wheel materials available. Contact factory. See page 34 for dimensional chart.
MEDIUM HEAVY DUTY
32
• Top Plate — Made from 1⁄4” carbon steel, heat treated to give added strength
• Upper Raceway — Coined 5⁄16” raceway pro- vides top performance under maximum ratedloads
• Lower Raceway — 1⁄4” diameter, hardened ball bearings roll freely in a hardened raceway
• Kingpin — Cold headed 3⁄4” diameter kingpin holds raceways precisely in alignment
• Horn Side Members — Formed steel is welded to cold formed steel upper raceway
• Wheel Bearings — Plain, self-lubricating or roller bearings and precision bearings are available
• Lubrication — Fittings are installed for both swivel raceway and wheel bearingsas required
• Finish — Corrosion-resistant zinc
Optional Top Plate:Add A Prefix - Ex: A1431-6
37⁄83
25⁄8
335⁄8
41⁄214003400
41⁄251⁄2
541⁄8
A1400A3400
Load Capacity 300-1,050 Lbs. Each Caster
Series 1400-3400
This series is the everyday workhorse ofour caster line. Its versatility with a broadwheel selection makes it ideal for mostgeneral medium-heavy duty industrialapplications, such as platform trucks, wireshelving, and other warehouse trucks andcarts for commercial use.
CA
ST
ER
S
Refer to page 31 for wheel selections.
33
Load Capacity 300-1,050 Lbs. Each CasterSeries 1400-3400
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
SwivelCasterDesc.
OrderNo.
RigidCasterDesc.
OrderNo.
4 2
11⁄2
5 2
6 2
Semi-SteelMold-on RubberRT Wheel - StandardRT Wheel - High Temp.RT Wheel - StandardRT Wheel - High Temp.RT Wheel - StandardRT Wheel - High Temp.Mold-on PolyurethaneK-WheelK-WheelK-WheelPolypropylenePolypropyleneDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUDyna-Tred PUPhenolicSemi-SteelMold-on RubberRT Wheel - StandardRT Wheel - High Temp.RT Wheel - StandardRT Wheel - High Temp.RT Wheel - StandardRT Wheel - High Temp.Mold-on PolyurethaneK-WheelK-WheelK-WheelPolypropylenePolypropyleneDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUDyna-Tred PUPhenolicPhenolicDuraflexSemi-SteelMold-on RubberRT Wheel - StandardRT Wheel - High Temp.RT Wheel - StandardRT Wheel - High Temp.RT Wheel - StandardRT Wheel - High Temp.Mold-on PolyurethaneK-Wheel
RollerRollerDelrin
H.T. BushingRollerRoller
PrecisionPrecision
RollerDelrinRoller
PrecisionPlainRollerDelrinRoller
PrecisionDelrinRoller
PrecisionRollerRollerRollerDelrin
H.T. BushingRollerRoller
PrecisionPrecision
RollerDelrinRoller
PrecisionPlainRollerDelrinRoller
PrecisionDelrinRoller
PrecisionDelrinRollerRollerRollerRollerDelrin
H.T. BushingRollerRoller
PrecisionPrecision
RollerDelrin
700380400400700700700700700700700700400400350350350600600600700900380650650900900900900900900900900500500450450450750750750900900300900420650650900900900900900900
1406-4x21418-4x21464W-4x21464W-HT-4x21465W-4x21465W-HT-4x21467W-4x21467W-HT-4x21438-4x21440-4x21441-4x21443-4x21460-4x21461-4x21490-4x21491-4x21493-4x21496-4x21498-4x21499-4x21431-4x21406-5x21418-5x21464W-5x21464W-HT-5x21465W-5x21465W-HT-5x21467W-5x21467W-HT-5x21438-5x21440-5x21441-5x21443-5x21460-5x21461S-5x21490-5x21491-5x21493-5x21496-5x21498-5x21499-5x21430-5x21431-5x21481-6x11⁄21406-6x21418-6x21464W-6x21464W-HT-6x21465W-6x21465W-HT-6x21467W-6x21467W-HT-6x21438-6x21440-6x2
269262683726221264002622226401262232640226822267642678026897269052690826212262142690326213262152691626819268142684026226264032622926404262322640526832267682678426898269062690926724269822690426727269852691726810268162697726811268272622726406262302640726233264082682826772
3406-4x23418-4x23464W-4x23464W-HT-4x23465W-4x23465W-HT-4x23467W-4x23467W-HT-4x23438-4x23440-4x23441-4x23443-4x23460-4x23461-4x23490-4x23491-4x23493-4x23496-4x23498-4x23499-4x23431-4x23406-5x23418-5x23464W-5x23464W-HT-5x23465W-5x23465W-HT-5x23467W-5x23467W-HT-5x23438-5x23440-5x23441-5x23443-5x23460-5x23461S-5x23490-5x23491-5x23493-5x23496-5x23498-5x23499-5x23430-5x23431-5x23481-6x11⁄23406-6x23418-6x23464W-6x23464W-HT-6x23465W-6x23465W-HT-6x23467W-6x23467W-HT-6x23438-6x23440-6x2
271602712727442274842744327482274442748527159270402704527529270752707927162274742753327090274752753427115271232712927462274862746527487274682748827151270412704627530270762708027027270332753527030270362753625073271142715327124271112746327489274662749027469274912712027042
34
Load Capacity 300-1,050 Lbs. Each Caster
Series 1400-3400
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
SwivelCasterDesc.
OrderNo.
RigidCasterDesc.
OrderNo.
8 2
OPTIONS: 1. Rollock Brake (Add RB Suffix - Ex: 1491-6RB)
See accessory page 62. Grease Seals (Add GS Suffix - Ex: 1491-6GS)
See accessory page 63. Cam Style Brake (Add SB Suffix - Ex: 1491-6SB)
See accessory page 74. Thread Guard, contact factory (Add TG suffix - Ex: 1491-6TG)5. PL4 Field Mountable Four Position Swivel Lock available. See accessory page 76. Total Lock (Add TB Suffix - Ex: 1491-6TB) See accessory page 7
Mounting Bolt Diameter — 3⁄8”Axle Size — 1⁄2”
6 2
AC
B
A
B
K-WheelK-WheelPolypropylenePolypropyleneDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUDyna-Tred PUPhenolicPhenolicBalloonSemi-SteelMold-On RubberRT-Wheel - StandardRT-Wheel -HighTemp.RT-Wheel - StandardRT-Wheel -HighTemp.RT-Wheel - StandardRT-Wheel -HighTemp.Mold-On PolyurethaneK-WheelK-WheelK-WheelPolypropylenePolypropyleneDuraflexDyna-Tred TPRDyna-Tred TPRDyna-Tred TPRDyna-Tred PUDyna-Tred PUDyna Tred PUPhenolicPhenolic
RollerPrecision
PlainRollerDelrinRoller
PrecisionDelrinRoller
PrecisionDelrinRollerBall
RollerRollerDelrin
H.T. BushingRollerRoller
PrecisionPrecision
RollerDelrinRoller
PrecisionPlainRollerRollerDelrinRoller
PrecisionDelrinRoller
PrecisionDelrinRoller
900900550550550550550900900900900900300
1050500675675
10501050105010501000105010501050600600500700700700
10001000100010501050
1441-6x21443-6x21460-6x21461-6x21490-6x21491-6x21493-6x21496-6x21498-6x21499-6x21430-6x21431-6x21416-6x21406-8x21418-8x21464W-8x21464W-HT-8x21465W-8x21465W-HT-8x21467W-8x21467W-HT-8x21438-8x21440-8x21441-8x21443-8x21460-8x21461-8x21481-8x21490-8x21491-8x21493-8x21496-8x21498-8x21499-8x21430-8x21431-8x2
266902689926885269102672526723264862672826986267712680926817268012681326823262282640926231264102623426411268292677626694269002690726911269792672626984269202672926987269212654826818
3441-6x23443-6x23460-6x23461-6x23490-6x23491-6x23493-6x23496-6x23498-6x23499-6x23430-6x23431-6x23416-6x23406-8x23418-8x23464W-8x23464W-HT-8x23465W-8x23465W-HT-8x23467W-8x23467W-HT-8x23438-8x23440-8x23441-8x23443-8x23460-8x23461-8x23481-8x23490-8x23491-8x23493-8x23496-8x23498-8x23499-8x23430-8x23431-8x2
270472753127077270812702827155273982703127037271022715427116270842712527112274642749627467274972747027498271302704427048275322707827082271612702927035275372703227038275382505327118
Wheel Diameter (A) 4” 5” 6” 8”Overall Height (B) 55⁄8” 61⁄2” 71⁄2” 91⁄2”Swivel Radius (C) 33⁄4” 41⁄4” 5” 61⁄8”
35
MEDIUM HEAVY DUTYC
AS
TE
RS
• Horn Side Member — 8-gauge thickstainless steel is welded to cold forged top plate
• Upper Raceway — Fully hardened 5⁄16”diameter stainless steel ball bearings in a large diameter raceway provide top performance under maximum rated loads
• Lower Raceway — Large diameter, 1⁄4”hardened stainless steel ball bearings roll freely in a large diameter lubricated raceway
• Kingpin — Cold headed 3⁄4” diameter kingpin holds raceways precisely in alignment
• Wheel Bearings — Plain, Delrin, or sealed roller bearings are also available
41⁄235⁄8
3
25⁄83
37⁄8
Stainless Steel 1400/3400 SeriesLoad Capacity 450-1,050 Lbs. Each Caster
Our popular 1400 series now available in atough, all-stainless steel construction. Ideal forall demanding medium-heavy duty applicationsin corrosive environments. S1400 Casters arecompatible with the full array of Faultless high performance wheels and accessories. High per-formance wheels are standard with Delrin bear-ings for performance in chemicals, oils, or washdown applications.
RT Wheel
Wheel Options
PhenolicDyna-Tred PU K-WheelDyna-Tred TPR Polypropylene
36
K-WheelPolypropyleneRT - StandardRT - High Temp.PhenolicK-WheelPolypropyleneRT - StandardRT - High Temp.Dyna-Tred TPRDyna-Tred PUPhenolicK-WheelPolypropyleneRT - StandardRT - High Temp.Dyna-Tred TPRDyna-Tred PUPhenolicK-WheelPolypropyleneRT - StandardRT - High Temp.Dyna-Tred TPRDyna-Tred PUPhenolic
DelrinDelrinDelrinPlainDelrinDelrinDelrinDelrinPlainDelrinDelrinDelrinDelrinDelrinDelrinPlainDelrinDelrinDelrinDelrinDelrinDelrinPlainDelrinDelrinDelrin
700450600600600900500650650450750650900700650650550900650
1050800675675700
1000675
S1440-4S1460-4
S1464W-4S1464W-HT-4
S1430-4S1440-5S1460-5
S1464W-5S1464W-HT-5
S1490-5S1496-5S1430-5S1440-6S1460-6
S1464W-6S1464W-HT-6
S1490-6S1496-6S1430-6S1440-8S1460-8
S1464W-8S1464W-HT-8
S1490-8S1496-8S1430-8
2944129443294452944629440294612946326931294592946629468294602948129483269322947729486294882948029501295032951029499295062950829500
S3440-4S3460-4
S3464W-4S3464W-HT-4
S3430-4S3440-5S3460-5
S3464W-5S3464W-HT-5
S3490-5S3496-5S3430-5S3440-6S3460-6
S3464W-6S3464W-HT-6
S3490-6S3496-6S3430-6S3440-8S3460-8
S3464W-8S3464W-HT-8
S3490-8S3496-8S3430-8
2952129523295182951929520295412954329538295392954629548295402956129563295582955929566295682956029581295832957829579295862958829580
OPTIONS:1. Rollock Brake (Add RB Suffix - Ex:S1430-8RB) Available in 4”, 5”, 6”, 8”.
See accessory page 6.2. Grease Seals (Add GS Suffix - Ex:S1430-8GS)
See accessory page 6.3. Lube fittings optional.4. Stainless Steel ball bearings available with some wheels.
Stainless Steel 1400-3400 SeriesLoad Capacity 450-1,050 Lbs. Each Caster
Wheel Diameter (A) 4” 5” 6” 8”Overall Height (B) 55⁄8” 61⁄2” 71⁄4” 91⁄2”Swivel Radius (C) 33⁄4” 41⁄4” 5” 61⁄8”
Mounting Bolt Diameter — 3⁄8”, Axle Size — 1⁄2”
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
SwivelCasterDesc.
OrderNo.
RigidCasterDesc.
OrderNo.
4 2
5 2
6 2
8 2
AC
B B
AStainless SteelRollock Brake
Grease Seal
Options
37
HEAVY DUTYC
AS
TE
RS
• Top Plate — Extra-thick 5⁄16” carbon steel,heat-treated for added strength and durability in severe service
• Yoke — Cold formed 1⁄4” steel, notched for optional 4-position lock
• Kingpin — An extra-heavy 7⁄8” diameter king pin assembly aligns raceway
• Upper Raceway — 7⁄16” diameter hardened ball bearings
• Lower Raceway — 5⁄16” diameter hardened ball bearings
• Formed Side Members — Cold formed from 1⁄4” steel for added strength, then welded to the yoke base
• Wheel Bearings — Large diameter industrial-grade roller bearings are standard for all wheel sizes
• Heavy-Duty Axle — Solid 1⁄2” diameter axle with lock nut for quick easy wheel replacement
• Lubrication — Fittings are installed for both swivel raceway and wheel bearingsas required
• Finish — Corrosion-resistant zinc
65⁄16
51⁄4415⁄16
27⁄16
33⁄8
41⁄2H1400
Load Capacity 420-1,800 Lbs. Each Caster
Series H1400-H3400
This series recommended for heavy-dutytrucks, dollies, platform trucks, and a vari-ety of equipment used in industry. Bothupper and lower raceways are hardenedto resist wear for added life.
HD Mold-onPolyurethane
Phenolic
Semi-Steel Mold-onPolyurethane
Super-K
Mold-on Rubber
RTDyna-Tred TPR Dyna-Tred PU
Wheel Options
38
Load Capacity 420-1,800 Lbs. Each Caster
NOTE: Four Position Swivel Lock, Field Mountable, see page 7.(Add PL4 Suffix - Ex: H1406-8x2PL4)
Series H1400-H3400
Wheel Diameter (A) 6” 8” 10”Overall Height (B) 71⁄2” 101⁄8” 111⁄2”Swivel Radius (C) 53⁄8” 63⁄8” 73⁄8”
Mounting Bolt Diameter — 1⁄2”Axle Size — 1⁄2”
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
SwivelCasterDesc.
OrderNo.
RigidCasterDesc.
OrderNo.
62
21⁄2
8
2
21⁄2
10 21⁄2
AC
B
A
B
Semi-SteelPolyurethanePhenolicMold-on RubberSuper KRTDyna-Tred TPRDyna-Tred PUSemi-SteelMold-on PolyurethanePhenolicMold-on RubberSemi-SteelMold-on PolyurethanePhenolicMold-on RubberSuper KDyna-Tred PUDyna-Tred TPRRTSemi-SteelMold-on PolyurethanePhenolicMold-on RubberSemi-SteelMold-on PolyurethaneMold-on Rubber
RollerRollerRollerRoller
PrecisionRollerRollerRollerRollerRollerRollerRollerRollerRollerRollerRoller
PrecisionRollerRollerRollerRollerRollerRollerRollerRollerRollerRoller
120012501200420
15001200550900
160016001600600
150015001400500
18001000700
1400160016001600800
18001800800
H1406-6x2H1438-6x2H1431-6x2H1418-6x2H1441B-6x2H1465W-6x2H1491-6x2H1498-6x2H1406-6x21⁄2H1438-6Hx21⁄2H1431-6x21⁄2H1418-6x21⁄2H1406-8x2H1438-8x2H1431-8x2H1418-8x2H1441B-8x2H1498-8x2H1491-8x2H1465W-8x2H1406-8x21⁄2H1438-8Hx21⁄2H1431-8x21⁄2H1418-8x21⁄2H1406-10x21⁄2H1438-10Hx21⁄2H1418-10x21⁄2
266002660926606266032624026254262362623826612266222661826615266012661026607266042624226239262372632226613266212661926616266142662326617
H3406-6x2H3438-6x2H3431-6x2H3418-6x2H3441B-6x2H3465W-6x2H3491-6x2H3498-6x2H3406-6x21⁄2H3438-6Hx21⁄2H3431-6x21⁄2H3418-6x21⁄2H3406-8x2H3438-8x2H3431-8x2H3418-8x2H3441B-8x2H3498-8x2H3491-8x2H3465W-8x2H3406-8x21⁄2H3438-8Hx21⁄2H3431-8x21⁄2H3418-8x21⁄2H3406-10x21⁄2H3438-10Hx21⁄2H3418-10x21⁄2
266252663426631266282674827493266562666126637266462664326640266262663526632266292675026663266602749426638266472664426641266392664826642
Cam-StyleWheel Brake
Four PositionSwivel Lock
Options
MATERIAL
Ruberex (Soft Rubber) Pg. 80
Dyna-Tred TPR/Dyna-Tred II TPR (Thermoplastic Rubberon Polypropylene) Pg. 69-70Mold-on Rubber on semi-steel Pg. 75
Plaskite (Phenolic) Pg. 82
Polyflex (Polypropylene) Pg. 78
Rockite (Hard Rubber) Pg. 81
Dyna-Tred PU(Polyurethane on Polypropylene) Pg. 71
Mold-on Polyurethane on semi-steel Pg. 74
HD Mold-on Polyurethane Pg. 74
K-Wheel (Solid Urethane) Pg. 73
Super K-Wheel (Solid Urethane with Steel Sleeve) Pg. 72
Cast Iron Pg. 76
Duraflex (Solid Cushioned Rubber Tire) Pg. 79
Pneumatic Pg. 79
High Impact Glass Filled Nylon Pg. 90-92
Hot Drop Forged (Steel) Pg. 77
Sintered Iron Pg. 77
Balloon Wheel Pg. 79
RT Wheel (Standard) Pg. 68
RT Wheel (High Temperature) Pg. 68-69
WHEELSELECTIONGUIDE A
spha
ltB
rick
&C
eram
icTi
leC
oncr
ete
Epo
xyH
ardw
ood
Lino
leum
&C
omp.
Tile
Ste
el,R
ibbe
dS
teel
,Sm
ooth
Terr
azzo
Woo
dB
lock
&P
lank
ing
Mild
Che
mic
als
Har
shC
hem
ical
sS
mal
lMet
alS
crap
sLa
rge
Met
alS
crap
sE
xces
sive
Hea
t(+1
600F)
Exc
essi
veC
old
(-20
0F)
FLOOR SURFACE CONDITIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
39
ACCESSORIES
40
WHEEL CAPACITY
70 - 300 lbs.
80-700 lbs.
240 - 1,150 lbs.
300 - 3,500 lbs.
200 - 600 lbs.
100 - 450 lbs.
90 - 1,000 lbs.
600 - 3,500 lbs.
1,760 - 4,900 lbs.
300 - 1,500 lbs.
1,100 - 4,200 lbs.
300 - 4,000 lbs.
300 - 600 lbs.
250 - 515 lbs.
300 - 1,500 lbs.
6,500 - 17,000 lbs.
150 - 450 lbs.
300 lbs.
600 - 1,400 lbs.
600 - 1,400 lbs
OUTSIDE DIA.
15⁄8” - 5”
2” - 8”
4” - 12”
3” - 12”
15⁄8” - 8”
15⁄8” - 5”
2” - 8”
4” - 12”
6” - 12”
3” - 8”
5” - 12”
3” - 12”
6” - 12”
6” - 16”
3” - 8”
6” - 10”
2” - 4”
6”
31⁄2” - 8”
31⁄2” - 8”
SERIES
9000, E Series, 100, 400
9000, E Series, 400, 800, 1400, H
C1400, H, KP, HX
100, 400, 1400, H
9000, E Series, 100, 400, 1400
9000, E Series, 100, 400
9000, E Series, 400, 1400, H
1400, H
1400, H
400, 800, KPL, 1400, H
1400, H, HX
100, H
1400
400, 1400
300, 1400
100
400, 1400
400, 1400, H1400
400, 1400, H1400
Wheel Selection Guide
41
REINFORCEDTHERMOPLASTIC
Load Capacity 600 - 1400 Lbs. Each Wheel
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
PlainBoreSize
600600700700800800800100012001400
19⁄16
19⁄16
19⁄16
19⁄16
23⁄16
19⁄16
19⁄16
23⁄16
23⁄16
23⁄16
13⁄161⁄2
13⁄161⁄2
13⁄16
13⁄161⁄2
13⁄16
13⁄16
13⁄16
3⁄4-
3⁄4-
3⁄43⁄4-
3⁄43⁄43⁄4
----
5⁄8--
5⁄85⁄85⁄8
3⁄8-
3⁄8-
1⁄23⁄8-
1⁄21⁄21⁄2
----
3⁄4--
3⁄43⁄43⁄4
PlainBore
Order No.43975443524397644353442104397744354442114421244213
RollerBearing
Order No.
37660-
37661-
3790437662
-379053790637907
PrecisionBearing
Order No.
----
42934--
429354293642937
DelrinBushing
Order No.
----
43979--
439804398143982
64W 65W 67W 64W
Bore SizeWith Roller
Bearing
Bore SizeWith Bearing
Spanner
Bore SizeWith Delrin
BushingHub
Length*
Bore SizeWith Precision
Bearing
31⁄2 11⁄2
411⁄2
2
11⁄25
26 2
28
Axle Size
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
PlainBoreSize
600
600
600
700
700
700
700
800
800
800
800
1000
1200
1400
19⁄16
19⁄16
19⁄16
19⁄16
19⁄16
19⁄16
19⁄16
23⁄16
19⁄16
19⁄16
19⁄16
23⁄16
23⁄16
23⁄16
13⁄161⁄23⁄8
13⁄163⁄41⁄23⁄8
13⁄16
13⁄161⁄23⁄8
13⁄16
13⁄16
13⁄16
3⁄4--
3⁄4---
3⁄43⁄4--
3⁄43⁄43⁄4
-------5⁄8---5⁄85⁄85⁄8
3⁄8--3⁄8---1⁄23⁄8--1⁄21⁄21⁄2
PlainBore
Order No.
4433244334443354433644337443384433944241443414434344344442714425444276
RollerBearing
Order No.
37679--
37690---
4291337692
--
429144291542916
PrecisionBearing
Order No.
-------
42923---
429174291842919
DelrinBushing
Order No.
37678--
37689---
4289237691
--
429084290942910
64W 65W 67W 64W
Bore SizeWith Roller
Bearing
Bore SizeWith Bearing
Spanner
Bore SizeWith Delrin
BushingHub
Length*
Bore SizeWith Precision
Bearing
31⁄2 11⁄2
4 11⁄2
2
11⁄2
52
6 228
Axle Size
3⁄4--
3⁄4---
3⁄43⁄4--
3⁄43⁄43⁄4
RT Standard WheelsLoad Capacity 600 - 1400 Lbs. Each Wheel
• Roller Bearing for 3⁄8” Bore requires Spanner #41781. Spanner can be used in either standard or high temperature version.• 1⁄2” Plain Bore reduced to 3⁄8” Bore requires Spanner #41840.See Heat Deflection Chart on Next Page.
WH
EE
LS
Reinforced Thermoplastic material and specific processing create this high per-formance, durable, and cost effective wheel. The RT series of wheels, designedfor use in the Faultless 1400 and 400 Series Casters, are ideally suited for foodprocessing, tool storage, sanitary maintenance, and applications requiring easymobility under heavy loads. They are extremely resistant to water, chemicalabsorption, and steam cleaning. Standard wheel operating temperature range is-20°F to +250°F and the High Temperature version range is -20°F to +480°F.Durometer is 65D.
RT High-Temp Wheels
3 TIMES THE
IMPACT VS.
PHENOLIC
THERMOPLASTICRUBBER-ONPOLYPROPYLENE
42
480480500525550575
Heat Deflection vs. Time forHigh Temp RT Wheels
Note: Thread Guards are optional; Gray thermoplastic tread on black polypropylene core is standard.If spanner required, order separately. Plain bearing standard.
Dyna-Tred II wheels, second generation of already proven and test-ed Dyna-Tred wheels, add a new variety of alternatives for wheelsin E-Series casters. These wheels have the same chemical inter-locking tread as its larger Dyna-Tred counterparts. These wheelsgive dollies, furniture, carts, and trucks a whole new look and ride.
WheelDia.(In.)
TreadWidth(In.)
LoadCapacity
(Lbs.)
HubLength
(In.)
AxleSize(In.)
Use WithSwivel Caster Series
WheelDesc.
OrderNo.
221⁄2345
3⁄413⁄1613⁄1615⁄1615⁄16
808090115125
29⁄3229⁄32
11⁄64
15⁄32
15⁄32
1⁄41⁄41⁄4
5⁄165⁄16
EW, ER, EK, EP, EYEW, ER, EK, EP, EYEW, ER, EK, EP, EYEW, ER, EK, EP, EYEW, ER, EK, EP, EY
1-2x3⁄41-21⁄2x13⁄16
1-3x13⁄16
1-4x15⁄16
1-5x15⁄16
4712247123471044713547140
7 11 15 22 30 60 60
700
600
500
400
300
200
100
TIME (Minutes)
TE
MP
ER
ATU
RE
(F)
600
WH
EE
LS
Dyna-Tred II Load Capacity 80-125 Lbs. Each Wheel
43
THERMOPLASTICRUBBER-ON
POLYPROPYLENEW
HE
ELS
--------
45796----
44223----
43965---
44222
Thermoplastic rubber resists chemicals, caustics,oils, acids, and wear. Rugged polypropylene hubwon’t dent, mar, fade or stain. Tread and hub aredouble bonded and mechanically interlocked toeliminate tread separation. Gives dollies, carts andtrucks a soft and cushioned non-marking ride.Temperature operating range is -40°F to +180°F.Durometer is 70A.
Note: Gray thermoplastic tread on black polypropylene core is standard. If spanner required, order separately. Special Top Hat Spanner used with Precision Bearing. Wheels with 2” tread width.*Black Tread with Gray Core
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithoutBearing
WithBearing
andSpanner
WithBearing,
NoSpanner
Use WithSwivelCasterSeries
PrecisionBearingDesc.
OrderNo.
BallBearingDesc.
OrderNo.
DelrinBearingDesc.
OrderNo.
RollerBearingDesc.
OrderNo.
Axle Size
180180225225250250350350350300300450450450325325550550550300700700700
111⁄16
111⁄16
111⁄16
111⁄16
111⁄16
111⁄16
23⁄823⁄823⁄8
111⁄16
111⁄16
23⁄823⁄823⁄819⁄16
19⁄16
23⁄823⁄823⁄82
23⁄823⁄823⁄8
------------
13⁄16
13⁄16
---
13⁄16
13⁄16
--
13⁄16
13⁄16
------
1⁄21⁄21⁄2--
1⁄21⁄21⁄2--
1⁄21⁄21⁄2-
1⁄21⁄21⁄2
3⁄83⁄83⁄83⁄83⁄8-
5⁄83⁄43⁄43⁄83⁄85⁄83⁄43⁄43⁄83⁄85⁄83⁄43⁄41⁄25⁄83⁄43⁄4
100,400100,400
400400400400140014001400400400140014001400400400140014001400F400140014001400
-90-3x11⁄4
-90-31⁄2x11⁄4
-90-4x11⁄4
-90-4x2
--
90-5x11⁄4-
90-5x2--
90-6x13⁄8-
90-6x2---
90-8x2-
-42966
-42967
-42968
-45795
--
42969-
44074--
43920-
44075---
44077-
93-3x11⁄4TG-
93-31⁄2x11⁄4TG-
93-4x11⁄4TG-
93-4x2--
93-5x11⁄4TG-
93-5x2----
93-6x2---
93-8x2--
3
11⁄431⁄2
11⁄4
11⁄44
2
11⁄4
2
5
13⁄8
2
6
15⁄8
2
8
RollerDelrinPrecisionTop HatSpanner
Bearing Options
Dyna-Tred TPR WheelsLoad Capacity 180-700 Lbs. Each Wheel
--------
91-4x2----
91-5x2----
91-6x2---
91-8x2
42970-
42971-
42972-
45794--
42973-
42947----
44249---
45078--
--------------
92-6x13⁄8----
*92-8x15⁄8---
--------------
44064----
44245---
Also Available - Super Soft Version - 55A
POLYURETHANE ONPOLYPROPYLENE
44
Dyna-Tred PU WheelsLoad Capacity 225-1,000 Lbs. Each Wheel
Note: If spanner required, order separately. Red polyurethane on black polypropylene core is standard on 2” wide wheels. Gray on black stan-dard on 1 1/4” wide wheels.
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithoutBearing
WithBearing
andSpanner
WithBearing,
NoSpanner
Use WithSwivelCasterSeries
PrecisionBearingDesc.
OrderNo.
BallBearingDesc.
OrderNo.
DelrinBearingDesc.
RollerBearingDesc.
OrderNo.
Axle Size
225225250250300300600600600325325750750750350350900900900
100010001000
111⁄16
111⁄16
111⁄16
111⁄16
111⁄16
111⁄16
23⁄823⁄823⁄8
111⁄16
111⁄16
23⁄823⁄823⁄819⁄16
19⁄16
23⁄823⁄823⁄823⁄823⁄823⁄8
------------
13⁄16
13⁄16
-11⁄8-
13⁄16
13⁄16
-13⁄16
13⁄16
------
1⁄21⁄21⁄2--
1⁄21⁄21⁄2-
3⁄81⁄21⁄21⁄21⁄21⁄21⁄2
3⁄83⁄83⁄83⁄83⁄8-
5⁄83⁄43⁄43⁄83⁄85⁄83⁄43⁄43⁄81⁄25⁄83⁄43⁄45⁄83⁄43⁄4
100,400100,400
400400400400140014001400400400140014001400400400140014001400140014001400
--------------
97-6x13⁄8-------
--------------
44076-------
-96-3x11⁄4
-96-31⁄2x11⁄4
-96-4x11⁄4
-96-4x2
--
96-5x11⁄4-
96-5x2--
96-6x13⁄8-
96-6x2--
96-8x2-
-42974
-42975
-42976
-45797
--
42977-
44081--
42111-
44083--
44100-
--------
98-4x2----
98-5x2----
98-6x2--
98-8x2
99-3x11⁄4TG-
99-31⁄2x11⁄4TG-
99-4x11⁄4TG-
99-4x2--
99-5x11⁄4TG-
99-5x2----
99-6x2--
99-8x2--
3
11⁄431⁄2
11⁄4
11⁄44
2
11⁄4
2
5
13⁄8
2
6
2
8
42978-
42979-
42980-
42949--
42981-
42950----
42162--
42164--
Polyurethane tread for high load capacity andextended wear. Protects floors and resistschemicals, caustics, acids, and oils. Ruggedpolypropylene hub will not dent, mar, fade, orstain. Tread and hub are mechanically inter-locked to eliminate tread separations.Temperature operating range is -40°F to +180°F.Durometer is 90A.
RollerDelrinPrecisionTop HatSpanner
Bearing Options
--------
45798----
44172----
44175--
44170
WH
EE
LS
OrderNo.
45
SOLID URETHANEW
HE
ELS
Super KLoad Capacity 1100-4200 Lbs. Each Caster
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)With
Spanner*
WithBearing,
NoSpanner
RadialBall
BearingDesc.
OrderNo.
OrderNo.
Axle Size
TaperedBearingDesc.
110015001620250025001800200025002500250025003000300042003400
21⁄421⁄431⁄431⁄431⁄421⁄431⁄431⁄431⁄431⁄431⁄431⁄431⁄441⁄431⁄4
1⁄21⁄23⁄43⁄4-
1⁄23⁄43⁄4--
3⁄43⁄4--
3⁄4
----
11⁄4---1
11⁄4--
11⁄411⁄4-
41B-5x241B-6x241B-6x21⁄241B-6x3
-41B-8x241B-8x21⁄241B-8x3
--
41B-10x21⁄241B-10x3
--
41B-12x3
37887378773791437917
-378793791537918
--
3791637919
--
37921
----
41T-6x3---
41T-8x341T-8x3
--
41T-10x341T-10x4
-
----
62675---
6267662677
--
6268162683
-
22
21⁄23
5
6
221⁄23
21⁄23
43
8
10
12
*Spanner included with all ball bearing Super K-Wheels
NOTE: Capacity ratings are based on intermittent service with speeds up to 5 mph.Speeds from 5 to 10 mph reduce capacity by 20%.
PrecisionTapered
Bearing Options
The Faultless Super-K is molded from a polyether-based polyurethane material that resists compres-sion set, rejects foreign objects, and has excellentresiliency for ease of movement in manual or in towapplications. The Super-K wheel will outperform allcompetition by combining a mechanically lockedsolid steel hub with precision grade bearings. Forsevere axial loadings, try our tapered bearing assem-bly. Temperature operating range is -50°F to +180°F.Durometer is 55D. Standard color is Blue.
SOLID URETHANE
46
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithoutBearing
WithBearing
NoSpanner
WithBearing
andSpanner
Use WithSwivelCasterSeries
DelrinBearingDesc.
OrderNo.
RollerBearingDesc.
OrderNo.
PlainBoreDesc.
OrderNo.
300500700700700700100010001000100012001200120012001500150015001500
19⁄16
19⁄16
23⁄16
23⁄16
23⁄16
19⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
1⁄21⁄2
13⁄16
13⁄16
13⁄161⁄2
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
--
3⁄43⁄45⁄8-
3⁄43⁄43⁄45⁄83⁄43⁄43⁄45⁄83⁄43⁄43⁄45⁄8
3⁄83⁄81⁄21⁄21⁄23⁄81⁄21⁄21⁄21⁄21⁄21⁄21⁄21⁄21⁄21⁄21⁄21⁄2
400400140014001400400140014001400140014001400140014001400140014001400
--
40-4x2----
40-5x2---
40-6x2--
-40-8x2
--
--
41999----
42003----
42012--
-42016
--
---
41-4x2----
41-5x2---
41-6x2-
--
41-8x2-
---
42002----
42005---
42014-
--
42018-
42-3x11⁄442-4x11⁄442-4x2
--
42-5x11⁄442-5x2
---
42-6x2---
42-8x2---
44182
4418544191
--
4419544198
---
44200---
44202-
Axle Size
3
4 2
5
2
6
2
8
2
11⁄4
11⁄411⁄4
PrecisionBearingDesc.
OrderNo.
----
43-4x2----
43-5x2---
43-6x2---
43-8x2
----
42911----
42920---
42922---
42912
K-WheelLoad Capacity 300-1,500 Lbs. Each Wheel
WH
EE
LS
RollerDelrinPrecisionTop HatSpanner
Bearing Options
The K-Wheel is molded from a high strength ure-thane compound which possesses the load character-istics of steel but gives the smooth effortless ride youexpect from polyurethane. Solid wheel has no plasticor metal core thereby eliminating any possibility oftread separation. It is not affected by blood, brine,greases, oils, or most harsh chemicals. It’s steamcleanable. Temperature operating range is -50°F to+180°F. Durometer is 55D. Standard color is blue.
If spanner required, order separately.
NOTE: Autoclave/Anti-Static material available. Contact Factory.Capacity ratings on precision bearing wheels are based on intermittent service with speeds up to 5 mph.
Speeds from 5 to 10 mph reduce capacity by 20%.
47
MOLD-ONPOLYURETHANE
WH
EE
LS
Duro-Tred Vulcanized WheelsLoad Capacity 700-4,950 Lbs. Each Wheel
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)
WithoutRoller
Bearing
WithBearing,
NoSpanner
Use WithSwivelCasterSeries
OrderNo.
Axle Size
WheelDesc.
700100012501760160016502150210024501500220016002100260025003350180025003100300041502700355035004950
23⁄16
23⁄16
23⁄16
23⁄16
27⁄831⁄431⁄431⁄431⁄423⁄16
23⁄16
27⁄831⁄431⁄431⁄431⁄427⁄831⁄431⁄431⁄431⁄431⁄431⁄431⁄431⁄4
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
115⁄16
115⁄16
115⁄16
115⁄16
13⁄16
13⁄16
13⁄16
115⁄16
115⁄16
115⁄16
115⁄16
13⁄16
115⁄16
115⁄16
115⁄16
115⁄16
115⁄16
115⁄16
115⁄16
115⁄16
3⁄43⁄43⁄43⁄43⁄411113⁄43⁄43⁄411113⁄411111111
1⁄21⁄21⁄21⁄21⁄23⁄43⁄43⁄43⁄41⁄21⁄21⁄23⁄43⁄43⁄43⁄41⁄23⁄43⁄43⁄43⁄43⁄43⁄43⁄43⁄4
140014001400
H
H14001400
H
H
38-4x238-5x238-6x238HD-6x238-6Hx21⁄238-6x21⁄238HD-6x21⁄238-6x338HD-6x338-8x238HD-8x238-8Hx21⁄238-8x21⁄238HD-8x21⁄238-8x338HD-8x338-10Hx21⁄238-10x21⁄238HD-10x21⁄238-10x338HD-10x338-12x21⁄238HD-12x21⁄238-12x338HD-12x3
37870378603786337940377913779537941378013794237865379433779337796379443780237945377943779737947378033794837800379503780437951
225
6
2
21⁄2
3
21⁄2
3
3
8
10
12
WithBearing
andSpanner
21⁄2
3
21⁄2
2
4
If spanner required, order separately.Note: Other bearing options available contact factory.
Polyurethane tread permanently attached to ametal core delivers a cushioned ride, excellentmobility, and extended life under extremelyheavy loads. Duro-Tred wheels protect floorsand loads better and will wear four to ten timeslonger than other wheel materials. Standardwith roller bearings.Temperature operatingrange is -40°F to +180°F. Durometer rating is95A in standard.
MOLD-ON RUBBER
48
Vulcanized Rubber Tread WheelsLoad Capacity 380-1,870 lbs. Each Wheel
Cushioned rubber tread permanently vulcanized to asemi-steel core is recommended for quiet movementwith heavy loads. Molded core provides addedstrength with a reinforced, double-thick hub.Vulcanized rubber-tread wheels are standard withroller bearings. Temperature operating range is -40°Fto +158°F. Durometer rating is 75A.
NOTE: Roller Bearings are standard. If spanner required, order separately.
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)
WithoutRoller
Bearing
WithBearing,
NoSpanner
Use WithSwivelCasterSeries
OrderNo.
Axle Size
TreadWheelDesc.
3803804207706006007001050500100080080011008501200800900115010001650900155011501870
23⁄16
23⁄16
23⁄16
21⁄427⁄831⁄431⁄431⁄423⁄16
21⁄427⁄831⁄431⁄431⁄431⁄427⁄831⁄431⁄431⁄431⁄431⁄431⁄431⁄431⁄4
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
115⁄16
115⁄16
113⁄16
13⁄16
13⁄16
13⁄16
115⁄16
113⁄16
115⁄16
113⁄16
13⁄16
115⁄16
113⁄16
115⁄16
113⁄16
115⁄16
113⁄16
115⁄16
113⁄16
3⁄43⁄43⁄43⁄43⁄41113⁄43⁄43⁄411113⁄411111111
1⁄21⁄21⁄2-
1⁄23⁄43⁄4-
1⁄2-
1⁄23⁄4-
3⁄4-
1⁄23⁄4-
3⁄4-
3⁄4-
3⁄4-
14001400
H, CPA
H
H, CPA
H
H
18-4x218-5x218-6x218HD-6x218-6Hx21⁄218-6x21⁄218-6x318HD-6x318-8x218-8HDx218-8Hx21⁄218-8x21⁄218-8HDx21⁄218-8x318-8HDx318-10Hx21⁄218-10x21⁄218-10HDx21⁄218-10x318-10HDx318-12x21⁄218HD-12x21⁄218-12x318HD-12x3
378103781337861614883776937773377796148937891614903777037774614913778061492377723777661493377816149437777615073778361508
225
6
2
21⁄2
3
21⁄2
3
3
8
10
12
WithBearing
andSpanner
21⁄2
3
21⁄2
2
4
WH
EE
LS
49
CAST IRONW
HE
ELS
Cast IronLoad Capacity 700-4,000 Lbs. Each Wheel
Semi-Steel — Cast iron toughened with steel,this wheel has extremely high load ratings andexceptionally long wear life. It’s recommendedfor rough wood and concrete floors – a goodchoice for moving heavy loads in manufacturingand warehousing. Long-life features include aheavy tread and plain or roller bearings. Ideal inextreme operating temperature ranges of -40°Fto +800°F with optional high temperature grease.
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithoutRoller
BearingPlain
Bearing
WithBearing,
NoSpanner
Use WithSwivelCasterSeries
RollerBearingDesc.
OrderNo.
70010001200160025002500150016002500280018002500300030004000
23⁄823⁄823⁄827⁄831⁄431⁄423⁄827⁄831⁄431⁄427⁄831⁄431⁄431⁄431⁄4
13⁄16
13⁄16
13⁄16
13⁄16
115⁄16
115⁄16
13⁄16
13⁄16
115⁄16
115⁄16
13⁄16
115⁄16
115⁄16
115⁄16
115⁄16
1⁄21⁄2-------------
3⁄43⁄43⁄43⁄4113⁄43⁄4113⁄41111
06-4x206-5x206-6x206-6Hx21⁄206-6x21⁄206-6x306-8x206-8Hx21⁄206-8x21⁄206-8x306-10Hx21⁄206-10x21⁄206-10x306-12x21⁄206-12x3
377153771637721377483775137755377333774937752377593775037753377613775437765
Axle Size
25 2
6
8
3
WithBearing
andSpanner
1⁄21⁄21⁄21⁄23⁄43⁄41⁄21⁄23⁄43⁄41⁄23⁄43⁄43⁄43⁄4
21⁄2
2
21⁄23
21⁄23
21⁄23
10
12
2
Steel CagedRoller
Bearing Options
4
NOTE: Roller bearing versions equipped with plastic cage bearings.If temperature exceeds 300° contact factory. If spanner required, order separately.
14001400
1400, HH
1400, HH
H
METAL WHEELS
50
Load Capacity 150-450 Lbs. Each Wheel
Sintered Iron — Powdered iron, compacted andsintered to cast-iron strength, makes a concentricand smooth tread. Standard with plain bearings.Temperature operating range is -40°F to +500°F.
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)
AxleSize(In.)
UseWith
Caster SeriesWheelDesc.
OrderNo.
150200300450
113⁄819⁄16
115⁄16
1⁄45⁄163⁄8
7⁄16
100100100100
08-2x108-21⁄2x108-3x13⁄16
08-4x13⁄8
44035438204392543926
15⁄1621
13⁄16313⁄84
21⁄2
Sintered Iron
WH
EE
LS
51
POLYPROPYLENEW
HE
ELS
PolyflexLoad Capacity 200-600 Lbs. Each Wheel
This polypropylene wheel has a light weight,low cost, high impact strength. It resists waterand chemical absorption, even stands up torepeated steam cleaning. Non-marking treadprovides excellent floor protection.Polypropylene is one of the strongest and mosteconomical wheels in many caster applications.It’s available with plain or roller bearings.Temperature operating range is -20°F to+180°F. Durometer is 60D. Ribbed
I-Beam
StraightSided
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithPlain
Bearing
WithBearing,
NoSpanner
WithBearing
andSpanner
Use WithSwivelCasterSeries
PlainBearingDesc.
OrderNo.
OrderNo.
200270275275400300300350350350400400350350400400500500500500500550550550550550600600
13⁄819⁄16
19⁄16
19⁄16
129⁄32
19⁄16
19⁄16
19⁄16
19⁄16
19⁄16
21⁄423⁄16
19⁄16
19⁄16
19⁄16
19⁄16
23⁄16
23⁄16
23⁄823⁄823⁄823⁄16
23⁄16
27⁄16
27⁄16
27⁄16
23⁄16
23⁄16
5⁄163⁄83⁄81⁄27⁄163⁄81⁄23⁄81⁄2
11⁄163⁄4
13⁄163⁄8
11⁄163⁄81⁄21⁄23⁄41⁄2
13⁄163⁄43⁄4
13⁄161⁄23⁄4
13⁄163⁄4
13⁄16
---------
1⁄2-
3⁄4-
1⁄2-----
3⁄4--
3⁄4--
3⁄4-
3⁄4
---------
3⁄8-
1⁄2-3⁄8-----
1⁄2--
1⁄2--
1⁄21⁄21⁄2
100, 400100, 400
400400100400400400400400
14001400400400400400
140014001400140014001400140014001400140014001400
60-21⁄2x11⁄860-3x11⁄460S-31⁄2x11⁄460S-31⁄2x11⁄460-4x15⁄16
60S-4x11⁄460S-4x11⁄460S-4x11⁄260S-4x11⁄2
-60-4x2
-60S-5x11⁄4
-60S-5x11⁄260S-5x11⁄260S-5x260S-5x260-5x2 Rib
-60-5x2 Rib60S-6x2
-60-6x2 Rib60-6x2 Rib
-60-8x2
-
450604318345767457664506845769457684577145770
-43102
-45785
-4577445773457864577643997
-4312945778
-4799543944
-43138
-
---------
61S-4x11⁄2-
61-4x2-
61S-5x11⁄4-----
61-5x2Rib--
61S-6x2--
61-6x2Rib-
61-8x2
---------
45772-
43467-
45783-----
43135--
45793--
43137-
43139
Axle Size
3
31⁄2
4
2
5
2
6
15⁄16
2
8 2
11⁄2
11⁄4
11⁄4
11⁄2
11⁄4
21⁄2 11⁄8
RollerBearingDesc.
11⁄4
DURAFLEX &PNEUMATIC WHEELS
52
WheelDesc.
NOTE: Specify for 1400 Series 3⁄4” bore without spanner bushing; for 1⁄2” bore order spanner bushing EDP No. 41878
RollerRollerBallBallBallBallBallBallBallBallBallBall
Load Capacity 125-515 Lbs. Each Wheel
WH
EE
LSDuraflex
Load Capacity 300 - 600 Lbs. Each WheelDuraflex wheels are solid cushion tires made from a special blend ofgranular rubber and chemical accelerators, cured under tremendous pres-sure. The result is a “bouncy” high impact resistant and puncture proofwheel. Tires are mounted on rugged polypropylene centers which will notdent or rust like conventional metal hubs. Ideal for hand trucks or otherequipment which requires a soft, cushioned ride. Durometer is 80A.
WheelDia.(In.)
TreadWidth(In.)
WheelBearing
Bore(In.)
CenteredOr Offset
HubLength
(In.)
LoadRating(Lbs.)
WheelDesc.
OrderNo.
3⁄4*3⁄4*5⁄83⁄45⁄83⁄45⁄83⁄45⁄83⁄45⁄83⁄4
CC
OffOffCC
OffOffCCCC
21⁄421⁄421⁄421⁄421⁄221⁄221⁄421⁄431⁄431⁄431⁄431⁄4
300500500500500500550550550550600600
I81-6x11⁄2I81-8x2I82-8x225x21⁄4 Off - 5⁄8I82-8x225x21⁄4 Off - 3⁄4I82-8x225x21⁄2- 5⁄8I82-8x225x21⁄2- 3⁄4I82-10x250x21⁄4 Off - 5⁄8I82-10x250x21⁄4 Off - 3⁄4I82-10x250x31⁄4- 5⁄8I82-10x250x31⁄4- 3⁄4I82-12x300x31⁄4- 5⁄8I82-12x300x31⁄4- 3⁄4
441544415544144441454414644147441484414944150441514415344152
11⁄22
6
21⁄48
21⁄210
312
This Faultless wheel provides a cushioned ride for delicate instruments andbreakable items. The tube-type, pressurized tire combines shock absorp-tion with quiet operation and easy rolling. Standard with ball bearings.
NominalDia.(In.)
PlyRating
Bore(In.)
WheelBearing
HubWidth(In.)
HubColor
LoadRating(Lbs.)
TreadStyle
OrderNo.
444442
668101216
1⁄21⁄21⁄21⁄21⁄25⁄8
BallBallBallBallBallBall
27⁄16
27⁄16
31⁄44
47⁄16
6
SilverSilverSilverSilverSilverRed
125125300350450515
SawtoothSawtoothSawtoothSawtoothSawtoothRibbed
I19-6x2BLKI19-6x2GRYI19-8x2.50I19-10x3.50I19-12x3.504.80x4.00x8x 5⁄8BP
441314414244104441214412520578
NOTE: All of the above Pneumatic wheels are centered. Contact Factory for Gray Wheel, Wheel Desc. I19-8x250, Order #44118
Pneumatic
53
SOFT RUBBER
------
3⁄8---
7⁄16
7⁄16
--W
HE
ELS
Ruberex®Load Capacity 70-240 Lbs. Each Wheel
This composition rubber wheel combines a soft rubber tread with a hard rubber core for quietmovement, a cushioned ride, and maximumfloor protection. Temperature operating range is-40°F to +158°F. Durometer is 75A.
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithoutRoller
BearingPlain
Bearing
WithBearing
NoSpanner
Use WithSwivelCasterSeries
PlainBearingDesc.
OrderNo.
7080908010090175200115200225240125200
3⁄415⁄16
11⁄64
29⁄32
13⁄811⁄64
19⁄16
19⁄16
15⁄32
19⁄16
115⁄16
115⁄16
15⁄32
19⁄16
------
11⁄16
---
11⁄16
11⁄16
--
7⁄32
1⁄41⁄41⁄4
5⁄16
1⁄43⁄83⁄8
5⁄16
3⁄87⁄16
7⁄16
5⁄16
3⁄8
------
1⁄2---
5⁄85⁄8--
9000, EW, EY9000, EW, EY
100W, EW, EY100, 4009000, EP100, 400
400EK, EP, EW, EY
400100100
EK, EP, EY400, K, G
4-15⁄8x47⁄64
4-2x7⁄821-2x14-21⁄2x13⁄16
21-21⁄2x11⁄84-3x13⁄16
21-3x11⁄421-31⁄2x15⁄16
4-4x15⁄16
21-4x11⁄421-4x15⁄16
21-4Bx15⁄84-5x15⁄16
21-5x11⁄4
4715547163471724717347231471754723844216472004725047244472694721847259
Axle Size
15⁄8
2
WithBearing
andSpanner
15⁄8
4
21⁄2
3
31⁄2
511⁄415⁄16
15⁄16
11⁄415⁄16
13⁄16
1
7⁄847⁄64
15⁄16
11⁄4
11⁄813⁄16
HARD RUBBER
54
WH
EE
LS
Rockite®Load Capacity 100-420 Lbs. Each Wheel
Hard-rubber molded composition. It combinesmany desirable characteristics: high-load rat-ing, good mobility, high-impact resistance, andgood floor protection. Temperature operatingrange is -40°F to 158°F. Durometer is 75D.
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithoutRoller
BearingPlain
Bearing
WithBearing,
NoSpanner
Use WithSwivelCasterSeries
PlainBearingDesc.
OrderNo.
150200100270275125275350420135300
11⁄64
13⁄811⁄64
19⁄16
19⁄16
15⁄32
19⁄16
115⁄16
115⁄16
15⁄32
19⁄16
---
11⁄16
---
11⁄16
11⁄16
--
1⁄45⁄161⁄43⁄83⁄8
5⁄163⁄87⁄167⁄165⁄163⁄8
-----------
100100, 400
EP100, 400
400EP, EY
400100100
EP, EY400, G
27-2x127-21⁄2x11⁄87-3x13⁄16
27-3x11⁄427-31⁄2x15⁄16
7-4x 15⁄16
27-4x11⁄427-4x15⁄16
27-4Bx15⁄87-5x15⁄16
27-5x11⁄4
4732947330472934733643543473164734647341473724732747347
Axle Size
2 1
4
5
WithBearing
andSpanner
-----------
11⁄813⁄16
11⁄43
21⁄2
31⁄2
11⁄4
15⁄815⁄16
11⁄4
15⁄16
15⁄16
15⁄16
55
PHENOLICW
HE
ELS
Plaskite®Load Capacity 300-3,500 Lbs. Each Wheel
21⁄2
Phenolic compound reinforced with macerated fabricmakes a high-strength, high-impact wheel resistant to oil,gasoline, even dilute acids. Compression-molded underextreme pressure, these wheels gain a dense, uniformconsistency. Phenolic wheels are non-marking, non-con-ductive, and spark-proof. They are available with plain orroller bearings. Will not warp or swell in a temperatureoperating range of -40°F to +300°F. Durometer is 75D.
Note: Hi-Temp version is available with a operating range of480° continuous, 530° intermittent.
Please see Page 68, RT Wheels, for further high temperatureoptions. If spanner required, order separately.
WheelDia.(In.)
TreadWidth(In.)
LoadRating(Lbs.)
HubLength
(In.)WithoutRoller
BearingPlain
Bearing
WithBearing,
NoSpanner
Use WithSwivelCasterSeries
PlainBearingDesc.
OrderNo.
RollerBearingDesc.
OrderNo.
300300500800800
10001000120012001600160030001400200020002500290030003500
19⁄16
19⁄16
115⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄16
23⁄431⁄431⁄423⁄16
23⁄431⁄431⁄431⁄431⁄431⁄4
-11⁄16
11⁄16
13⁄16
13⁄16
-13⁄16
-13⁄16
13⁄16
113⁄16
115⁄16
13⁄16
13⁄16
115⁄16
115⁄16
115⁄16
115⁄16
115⁄16
3⁄8--
3⁄4-
3⁄4-
3⁄4-----------
-1⁄25⁄8-
3⁄4-
3⁄4-
3⁄43⁄4113⁄43⁄411111
30-3x11⁄4--
30-4x2-
30-5x2-
30-6x2-----------
43838--
37629-
37638-
37641-----------
-31-3x11⁄431-4x15⁄8
-31-4x2
-31-5x2
-31-6x231-6Hx21⁄231-6x21⁄231-6x331-8x231-8Hx21⁄231-8x21⁄231-8x331-10x331-12x21⁄231-12x3
-3762737630
-37636
-37639
-3763737807 378163782037643378083781737821378223781937823
Axle Size
3 11⁄4
4 2
5 2
6
2
8
3
WithBearing
andSpanner
-3⁄8
7⁄16
-1⁄2-
1⁄2-
1⁄21⁄23⁄43⁄41⁄21⁄23⁄43⁄43⁄43⁄43⁄4
15⁄8
2
3
3
310
12
21⁄2
21⁄2
100100100
1400, H, HX, KP1400, H, HX, KP1400, H, HX, KP1400, H, HX, KP1400, H, HX, KP1400, H, HX, KP
H1400, HX, KP1400, HX, KP
1400, H, HX, KPH
HX, KPHX, KPHX, KPHX, KPHX, KP
DelrinSteel CagedRoller
Bearing Options
WHEEL BEARINGSELECTION
56
WH
EE
LB
EA
RIN
GS
1. Self–Lubricating: The self–lubricating bearing is an iron base powdered metalbushing press fitted into the wheel core. The powdered iron is porous and isimpregnated with oil so that with use, oil is leaked out to lubricate the axle.
2. Roller Bearing: (fig 2A) Normally this is a two–piece bearing, consisting of aroller assembly and a hardened outer race. The split-sleeve bearing (fig 2B) consistsof an outer raceway of hardened spring steel with a hardened roller and cage assem-bly. A full caged bearing assembly (fig 2A) consists of a fully encased outer racewaywith a hardened roller and cage assembly. All roller bearings operate in conjunctionwith a hardened shaft called a spanner.
3. Tapered Roller Bearing: The tapered roller precision bearing consists of acup which is pressed into the wheel hub, and a cone and roller combination whichfits integrally into the cup. The cup and core are hardened. The rollers are tilted toreact to both thrust and radial loads. These bearings are suited for towline, highspeed, and high load applications.
4. Flanged Radial Ball Bearing: This is a unique stamped construction thathas a one–piece outer raceway, which is cold–rolled and formed to a close toleranceball groove. The inner raceway is machined and hardened. The bearing is shieldedand grease packed. These bearings will react to thrust loading and considerableradial load.
5. Delrin Bearing: Delrin is a registered trademark of Dupont; this is an acetal resinmolded into a flange type bearing. The bearing is press fitted into the hub of the wheeland is rotated around a hardened spanner. This bearing has high mechanical strength,high impact, low static, and dynamic coefficients of friction, with a wide use temperaturerange (-40° to +230°F).
6. Radial Bearing: This type of sealed precision bearing consists of a hardenedouter raceway and inner raceway, separated by a concentric ring of hardened steelballs. This bearing is used in pairs and is usually press fitted into a deep pocket of awheel that has high load and high speed capabilities. This type of bearing is primarilyused to carry radial loads only.
7. Plain Bearing: (Not Shown) In a plain bearing, the hub material is actuallythe bearing. The wheel rotates on a steel axle and is the most economical bearingapplication.
What Type of Wheel Bearings Do You Use?
2B
2A
57
PNEUMATIC
• Cold Forged Construction — 3/16” formed steel legs are double welded for added strength under maximum load. Thick 1/4” steel top plate
• Double Ball Bearing Swivel — Large diameter main load bearing and thrust bearing assures easy maneuvering under heavy loads
• 4-Ply Tires — Standard on all wheel sizes provide longer wheel life and fewer repairs
• Heavy-Duty Steel Hub — Bolted for extradurability. Ball bearings offer maximum mobility
• Lube Fittings — Provided for swivel bearings• Finish — Corrosion-resistant zinc• Wheel Tread — Sawtooth tread design is
standard.
SP
EC
IALT
YC
AS
TE
RS
Air Faultless CastersLoad Capacity 310-450 Lbs. Each Caster
Air Faultless pneumatic wheel casters aredesigned to absorb shock and vibrationcaused by floor obstructions or outdoor ter-rain. Moves delicate industrial loads smooth-ly and safely over rough bumpy surfaces.
Wheel Diameter (A) 8” 10” 12”Overall Height (B) 915⁄16” 12” 15”Swivel Radius (C) 63⁄4” 85⁄16” 101⁄4”Mounting Bolt Diameter — 3⁄8”Axle Size — 1⁄2”
NOTE: Double ball raceway
TireSize
2.80/2.50-4
2.80/2.50-4
2.80/2.50-4
2.80/2.50-4
4.10/3.50-6
4.10/3.50-6
4.10/3.50-6
4.10/3.50-6
WheelBearing
LoadRating (Lbs.)
WheelDia. (In.)
SwivelCaster Desc.
I1419-8 Blk
I1419-8 Gray
I1419-8 Gray/Brk
I1419-8Black/Brk
I1419-10 Blk
I1419-10 Gray
I1419-12 Blk
I1419-12 Gray
OrderNo.
RigidCaster Desc.
OrderNo.
Ball
Ball
Ball
Ball
Ball
Ball
Ball
Ball
310
310
310
310
350
350
450
450
46110
46089
46085
48368
46112
46090
46114
46091
I3419-8 Blk
I3419-8 Gray
-
-
I3419-10 Blk
I3419-10Gray
I3419-12 Blk
I3419-12Gray
46111
46088
-
-
46113
46093
46115
46094
8
10
12
3
4
3
25⁄8
35⁄841⁄2
B
C
A
A
B
AIRLINE CONVEYORCASTERS
58
• Special Top Plates - For specific installation requirements
• Raceways - Fully sealed raceways for low maintenance and protection of the swivel head in outdoor environments
• Swivel Bearings - Precision bearing swivel• Wheel Bearings - Needle bearings; thread
guards standard• Finish - Corrosion-resistant zinc dichromate• Suggested Temperature Range -20oF — +180oF P2461-2-5/8 TG
Order #26028(Diamond Special Top Plate)
SP
EC
IALT
YC
AS
TE
RS
Airline/Conveyor CastersLoad Capacity 375 Lbs. Each Caster
WheelDiameter
23⁄4
Precision, Heavy DutyAir Cargo/Conveyor Caster
Designed for inverted applications, theseFaultless conveyor casters are designed foreasy installation and replacement in thefield. Special dust-and-grease cap and spe-cial all-temperature lubricant are standard,along with precision bearing swivel and nee-dle bearing wheels. Corrosive-resistant zincdichromate finish is standard.
TreadWidth(In.)13⁄8
WheelType
Polyflex
WheelBearingNeedle
AxleSize(In.)
3⁄8
LoadCapacity
(Lbs.)375
OverallHeight
(In.)41⁄32
SwivelRadius
(In.)23⁄8
MountingBolt Dia.
(In.)5⁄16
WheelDiameter
25⁄8
TreadWidth(In.)13⁄8
WheelType
Polyflex
WheelBearingNeedle
AxleSize(In.)
3⁄8
LoadCapacity
(Lbs.)375
OverallHeight
(In.)325⁄32
SwivelRadius
(In.)25⁄16
MountingBolt Dia.
(In.)5⁄16 & 3⁄8
P2461-2-5/8 TGOrder #26025
(Rectangle Top Plate)
WheelDiameter
25⁄8
TreadWidth(In.)13⁄8
WheelType
Polyflex
WheelBearingNeedle
AxleSize(In.)
3⁄8
LoadCapacity
(Lbs.)375
OverallHeight
(In.)325⁄32
SwivelRadius
(In.)25⁄16
MountingBolt Dia.
(In.)5⁄16 & 3⁄8
OrderNo.
26028
OrderNo.
27013
OrderNo.
26025
TopPlate
A
TopPlate
B
TopPlate
C
*Gray Polyflex Wheel
*Tan Polyflex Wheel
*Tan Polyflex Wheel
P2461-2-3/4 RTGOrder #27013
(Diamond Top Plate)
59
Load Capacity 270-375 Lbs. Each Caster
SP
EC
IALT
YC
AS
TE
RS
AIRLINE/CONVEYORCASTERS
WheelDiameter
TreadWidth(In.)11⁄8
15⁄16
WheelType
Hard Rubber
Polyflex
Phenolic
Polyflex
WheelBearing
BallBallBallBall
AxleSize(In.)
5⁄16
5⁄16
5⁄16
5⁄16
LoadCapacity
(Lbs.)270270300300
OverallHeight
(In.)325⁄32
325⁄32
41⁄32
41⁄32
SwivelRadius
(In.)25⁄825⁄8
215⁄32
215⁄32
MountingBolt Dia.
(In.)3⁄83⁄83⁄83⁄8
SwivelCasterDesc.
429-3x11⁄8TG461-3x15⁄16TG331-3x15⁄16TG
H461-3x15⁄16TG
OrderNo.
25526256752527825696
A B C
Flanged Air Cargo/Conveyor Caster
WheelDiameter
23⁄425⁄8
TreadWidth(In.)13⁄813⁄8
WheelTypePolyflex
Polyflex
WheelBearingNeedleNeedle
AxleSize(In.)
3⁄83⁄8
LoadCapacity
(Lbs.)375375
OverallHeight
(In.)41⁄32
325⁄32
SwivelRadius
(In.)213⁄16
27⁄16
MountingBolt Dia.
(In.)5⁄16
5⁄16 & 3⁄8
OrderNo.
26382*26022**
3
SwivelCasterDesc.
PF2461-23⁄4 RTGPF2461-25⁄8 TG
TopPlate
AB
TopPlate
CCCC
*1st Wheel Gray Polyflex, **2nd Wheel Tan Polyflex
This caster has all the features as the precision,heavy duty air cargo/conveyor caster plus theadded benefit of a toe protection flange safetyfeature.
Standard Line Conveyor Casters
The standard-line conveyor casters share some of the same features asthe other two lines. The primary difference is a double ball bearing race-way compared to the sealed precision bearing swivel. Wheel materialsavailable include: Rockite, Polyflex, and Plaskite. Rockite is a hard rub-ber molded composition throughout; this wheel is impervious to oils andgreases, has a high load capacity and good mobility. Polyolefin(Polyflex) wheel is light in weight, low in cost, and high in impactstrength. It resists water and chemical absorption and withstands steamcleaning. The Plaskite wheel is a phenolic compound reinforced withmacerated fabric that results in a high-strength, high impact wheel resis-tant to oil, gasoline, even dilute acids.
Load Capacity 270-375 Lbs. Each Caster
60
LOW PROFILE MEDIUMHEAVY DUTY CASTERS
SP
EC
IALT
YC
AS
TE
RS
Load Capacity 200-1,200 Lbs. Each CasterBusiness Machine Casters
Made to support and move heavy officeequipment where overall height is a limitingfactor. Ideal for use on copiers, computers,large printers, and other heavy diagnosticequipment.
• High Load Rating Capacities
• Low Overall Height
• Excellent Floor and Carpet Protection• Brakes — Optional thumb screw brake and
side brake available on some items. Contact factory for availability.
• Finishes — Black oxide with corrosion-resistant zinc top plate or all zinc finish
HA435-3x113⁄16
*Zinc finish**Dual wheels
*** 1⁄2-13 X 11⁄2 Threaded Stem
WheelDia.(In.)
TreadWidth(In.)
WheelMaterial
WheelBearing
AxleSize(In.)
LoadRating(Lbs.)
OverallHeight
(In.)
SwivelRadius
(In.)
MountingBolt
Dia. (In.)
BoltHole
Spacing (In.)
OverallTop PlateSize (In.)
SwivelCasterDesc.
OrderNo.
Hard RubberPolypropylenePhenolicHard RubberPolypropyleneGlass Filled NylonGlass Filled NylonGlass Filled NylonGlass Filled NylonGlass Filled NylonGlass Filled NylonPolypropyleneGlass Filled NylonGlass Filled Nylon
2
21⁄2
13⁄16
111⁄16
11⁄813⁄4
113⁄163
RollerPlainRollerPlainRollerRollerRollerRollerRollerRollerRollerPlainRollerRoller
5⁄165⁄167⁄165⁄167⁄16
7⁄167⁄167⁄167⁄167⁄163⁄83⁄81⁄21⁄2
275300240200400700700
1000700
1000500550
10001200
227⁄32
227⁄32
35⁄16
33⁄16
31⁄245⁄16
331⁄32
331⁄32
331⁄32
331⁄32
331⁄32
331⁄32
45⁄32
45⁄32
21⁄16
21⁄16
27⁄16
23⁄16
21⁄821⁄227⁄16
27⁄16
27⁄16
25⁄16
25⁄16
25⁄16
23⁄823⁄8
5⁄165⁄16
N/A5⁄165⁄16
3⁄85⁄165⁄165⁄165⁄165⁄165⁄165⁄165⁄16
13⁄4x27⁄8 to 313⁄4x27⁄8 to 31⁄2-13x11⁄2 ***13⁄4x313⁄4x27⁄8 to 3
25⁄8x35⁄8 to 3x323⁄8x33⁄823⁄8x33⁄823⁄8x33⁄823⁄8x33⁄823⁄8x313⁄32
23⁄8x313⁄32
23⁄8x33⁄823⁄8x33⁄8
29⁄16x 35⁄829⁄16x 35⁄8
N/A23⁄4x 37⁄16
29⁄16x 35⁄833⁄4x45⁄831⁄8x41⁄831⁄8x41⁄831⁄8x41⁄831⁄8x41⁄831⁄8x41⁄831⁄8x41⁄835⁄16x41⁄835⁄16x41⁄8
EP729-2R**BMHXEP629R BMG431-25⁄8*127-21⁄2*H461-21⁄2R BM
935-3 x 113⁄16*335-3 x 113⁄16*H335-3 x 113⁄16*335-3 x 113⁄16BMH335-3x113⁄16BMHA435-3 x 113⁄16BMHA360-3x113⁄16RBMHX1435-3x113⁄16*HX1435H-3x113⁄16BM
2994531151256072512825673
262202529425295252832528425330253002634126973
11⁄225⁄8
Wheel Options
PolypropyleneGlass FilledNylon
Hard Rubber
335-3x113⁄16
HXEP629R
HX1435-3x113⁄16
NOTE: Contact factory for rigid options available.Options: Wheel Face Brake (add WFB Suffix - Ex: 335-3WFB)
61
1350
1200
1050
1650
1500
900
750
600
450
300
150
0
LO
AD
(LB
.)
.025.050
.100.125
.150.175
.200.225
.250.275
.300.325
.350.375
.400
DEFLECTION (.000")
A: PRELOAD @ 350 LB. - MAX LOAD 900
B: PRELOAD @ 550 LB. - MAX LOAD 1250
C: PRELOAD @ 850 LB. - MAX LOAD 1600
C
B
A
SHX1435-3X1 13/16 LOAD VS DEFLECTION
• Shock Absorbing — Patented shock absorbing system utilizing pre-torqued elastomers with a weight sensitive pivotmechanism
• Low Profile — 3” diameter wheel size• Finish — Corrosion-resistant Black oxide
standard finish, corrosion-resistant zinc optional
• Wheels — Glass filled nylon with rollerbearing standard
SP
EC
IALT
YC
AS
TE
RS
SHOCK ABSORBINGCASTERS
SHX 1400
OPTIONS: Swivel locking system, wheel brakes, varietyof load ratings.NOTE: All SHX Product are produced to custom order.Consult your distributor or factory for availability.
Mounting Bolt Dia. — 5⁄16”Axle Size — 1⁄2”
WheelDia.(In.)
TreadWidth(In.)
OverallHeight
(In.)Offset(In.)
SwivelRadius
(In.) Maximum Load (Lbs.)
SwivelCasterDesc.
OrderNo.
421⁄32
421⁄32
421⁄32
13⁄16
13⁄16
13⁄16
27⁄16
27⁄16
27⁄16
900 with .350” Total Height Deflection1250 with .250” Total Height Deflection1600 with .250” Total Height Deflection
350550850
SHX1435-3x113⁄16
SHX1435-3x113⁄16
SHX1435-3x113⁄16
263282632926334
113⁄163
The SHX 1400 Series specialty cast-ers are designed to provide addedprotection when moving sensitivepayloads, such as business machinesor test equipment.
This SHX series has passed extensivelaboratory testing to simulate a widevariety of impacts and vibrations that may occur during transportation.
As shocks occur or loads temporarilyexceed capacity, the shock absorbingmechanism activates and protectssensitive loads. This caster line isideal for heavy loads requiring com-pact space allotments.
Pre-Loaded(Lbs.)
35⁄16
23⁄8
33⁄841⁄8
Load Capacity 350-1600 Lbs. Each Caster
62
• Double Action Spring — Compression action absorbs the jolts and bumps caused by rough floors, thresholds, etc.
• Spring and Draw Bars — Durable, long lasting spring and draw bars are on center line of wheel to prevent offset of load
• 2-to-1 Lever Arm — Helps reduce shock and lengthens spring life
• Constant Contact — Wheels contact floor sur-face at all times, eliminating bounce and keeping unit at a more constant level
• Thread Guards — Chrome Finish• Finish — Black Epoxy
INDUSTRIAL SPRINGACTION CASTERS
SP
EC
IALT
YC
AS
TE
RS
Load Capacity 900-1,200 Lbs. Each CasterShock Absorbing for Sensitive Loads
HS900HS9700
C
A
B
A
C
B
Mounting Bolt Diameter — 3⁄8”
Industrial Spring Action Casters are usedfor safe movement of calibrated instru-ments, delicately adjusted assemblies, toolboxes, and other load sensitive products.
SH1435-6TGBRK
HS900HS9700SH1400SH3400
WheelDia.(In.)
(A)
TreadWidth(In.)
WheelMaterial
WheelBearing
LoadRating(Lbs.)
OverallHeight(B) (In.)
SwivelRadius(C) (In.)
SwivelCasterDesc.
HS965W-6x2TGBrkSH1435-6x2TGBrkSH1441B-8x2BrkSH1441B-8x2-1/2Brk
RTGlass Filled Nylon
Super KSuper K
OrderNo.
26059265552624526260
RigidCasterDesc.
HS9765W-6x2TGSH3435-6x2TGSH3441B-8x2SH3441B-8x2-1/2
OrderNo.
27525267372736827369
RollerRoller
PrecisionPrecision
900120015002000
81⁄291⁄16
103⁄8103⁄8
431⁄32
431⁄32
67⁄16
65⁄8
6 2
SH1400SH3400
541⁄8
51⁄241⁄2
A
C
B
A
C
B
821⁄22
I. Please describe your application or problem:______________________________________________________________________________________________________________________________________________________________________________________________________
II. Floor Surface or ConditionsA. Floor Surface:
Asphalt Brick Concrete Steel Hardwood Carpet GravelOther (Describe): ___________________________________________________
B. Floor Surface Irregularities:Metal Scraps Water Threads Fiberglass Oil
C. Adverse Conditions:Excessive heat ________ How long? ________ minutesExcessive cold ________ How long? ________ minutes
III. Load Capacity and Equipment EvaluationA. Maximum load on unit: ________ (lbs.) Number of casters per unit: ________B. Total Weight of unit: ________ (lbs.) Number of units: ________C. Total Load Capacity: ________ (Sum of A (lbs.) + B (lbs.)D. Overall Size of unit: ________ (length) x ________ (width) x ________ (height)E. Will unit transport or carry people?________ (y/n) F. Will unit be subject to shock loading?________ (y/n) G. Will unit be power towed?________ (y/n) If so, what speed? ________ MPH
IV. Special RequirementsA. Caster height limitations: _______ (inches) B. Top plate size: ______ (length) x ______ (width) Mounting hole spacing ____ x ____C. Wheel brake required? ________ (y/n) Swivel lock? ________ (y/n) D. Sanitary (NSF) application? ________ (y/n)E. Stem mounting required? ________ (y/n)
If so, please specify:Threaded Stem: Size ________ (threads per inch) ________ (length)Tubular Mount: Gauge of tubing _______ (ga.) _______ (inside diameter)
REQUIRED INFORMATION BELOW:Fax Reply To:______________________________ Title: ________________________ Date: _______________Company:_________________________________ Fax: _____________________________________________Address:__________________________________ Phone: ___________________________________________City:______________________________________ State:_________________________ Zip: _______________
Have Salesperson call
CASTERWORKSHEET
FaultlessCasters.com