2 public auctions - asset sales · toyota 5,000lb propane forklift model 42-6fgu25 with 3-stage...
TRANSCRIPT
![Page 1: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/1.jpg)
Turn
in
g Your Assets into Dollars
2 Public AuctionsPLANTS
CLOSED
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
AUCTION #1: ALTEC - HAAS CNC & MANUAL MACHINE SHOP
PAGES 2-6
AUCTION #2:ALPHA MOLD - EDM, CNC PLASTIC, DIE & MOLD
PAGES 7-16
PLANT CLOSED
ALTECHAAS CNC & MANUAL MACHINE SHOP9901 TRUMBULL SE - ALBUQUERQUE, NM 87123TUESDAY, OCTOBER 17TH @ 10:00 A.M. MDT
Inspection: MONDAY, OCTOBER 16TH From 8:00 A.M. - 4:00 P.M.
YAM 20" SWING X 80" CENTERS ENGINE LATHE
HAAS SUPER VF2SSYT 4-AXIS (WIRED) CNC VERTICAL MACHINING CENTER
<CHARMILLES ROBOFIL 510P CNC WIRE EDM
<MITSUBISHI DM-800G HIGH SPEED CNC VERTICAL MACHINING CENTER
5AVAIL.
PLANT CLOSED
ALPHA MOLD WESTCNC PLASTIC, DIE & MOLD
7005 WEST 116TH AVE. - BROOMFIELD, CO 80020THURSDAY, OCTOBER 19TH @ 10:00 A.M. MDTInspection: WEDNESDAY, OCTOBER 18TH From 8:00 A.M. - 4:00 P.M.
INSTL NEW2006
107931_6 pager.indd 1 9/22/17 2:47 PM
![Page 2: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/2.jpg)
Turn
in
g Your Assets into Dollars
Public Auction #1PLANTS
CLOSED
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
PLANT CLOSED
ALTECHAAS CNC & MANUAL MACHINE SHOP
9901 TRUMBULL SE - ALBUQUERQUE, NM 87123TUESDAY, OCTOBER 17TH @ 10:00 A.M. MDT
Inspection: MONDAY, OCTOBER 16TH From 8:00 A.M. - 4:00 P.M.
HAAS SUPER MINI MILL CNC VERTICAL MACHINING CENTER
HAAS SUPER VF2SSYT 4-AXIS (WIRED) CNC VERTICAL MACHINING CENTER
INSTL NEW2006
HAAS VF1 CNC VERTICAL MACHINING CENTER
HAAS FL-4 CNC TURNING CENTER
INSTL NEW2005
2004
107931_6 pager.indd 2 9/22/17 2:47 PM
![Page 3: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/3.jpg)
ALTEC AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 17TH @ 10:00 A.M. MDT
3
Download a lot book at www.asset-sales.com
CNC VERTICAL MACHINING CENTERS
HAAS Model Super VF2 SSYT 4-Axis (Wired) CNC Vertical Machining Center with Extended Travel, 36” x 18” Worktable, 30” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, #40 Taper Spindle Speeds to 12.000 RPM, 24 Position Side ATC, Inline Direct Drive, Other Options Include: Thru-Spindle Coolant, ENET/HD/USB, 16 MB, VQC-V, FD3, SOM, COORD, RDH, MACRO, HSM, CC, Programmable Coolant Nozzle, sn:46271, Installed New 2006
HAAS Model VF1 CNC Vertical Machining Center with 26” x 14” Worktable, 20” X-Axis Travel, 16” Y-Axis, 20” Z-Axis, #40 Taper Spindle Speeds to 7500 RPM, 20 Position ATC, 2 Speed Gear Drive, 20 HP Dual Drive, Other Options Include: CC, P-Cool, IMB, FD3, Air Gun, Etc., sn:39185, Installed New 2005
HAAS Model Super Mini Mill CNC Vertical Machining Center with 12” x 29” Work Table, 16” X-Axis Travel, 12” Y-Axis, 10” Z-Axis, 15 HP Spindle Speeds to 10,000 RPM, ATC, Rigid Tap, IMB, Upgrade High Flow Coolant Pump, Programmable Coolant, Floppy Drive, Top Cover, sn:38352, mfg.10/2004
HURCO Model Spirit 40 SLV CNC Vertical Machining Center with 47” x 20” Work Table, 40” X-Axis Travel, 20” Y-Axis, 25” Z-Axis, #40 Taper Spindle Speeds to 10,000 RPM, 24 Position ATC, Ultimax Dual Screen CNC Control, sn:SV4/9004111A
HURCO Model BMC-30 4-Axis (Wired) CNC Vertical Machining Center with 40” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, #40 Taper Spindle Speeds to 10,000 RPM, 24 Position ATC, Ultimax Dual Screen CNC Control (Needs Electrical Work – Approx. $2,000 Cost, Labor Included), sn:BK9003030A
12.5” TSUDAKOMA 4th Axis Rotary Table with Tailstock
CNC TURNING CENTERSHAAS Model HL-4 CNC Turning Center with 10” 3-Jaw Chuck, 25” Swing x 34” Cutting Length, 2.5” Bore, Spindle Speeds to 3,400 RPM, 12 Position Turret, Tailstock, Chip Auger, Remote Pulse Generator, 1 Megabyte, Quick Code, Floppy, Rigid Tap, sn:61794
CINCINNATI Model Avenger 250T CNC Turning Center with 10” 3-Jaw Chuck, 23” Swing Over Bed x 19.7” Center Distance, 2.6” Bore, 10 Position Turret, Programmable Tailstock, Parts Catcher, Magazine Barfeeder & Acramatic 850 SX CNC Control, sn:3650BOT94-0122
CNC FLAT BED LATHEHAAS Model TL-2 CNC / Manual Flat Bed Lathe with 10” 3-Jaw Chuck, 16” Max. Swing x 48” Cutting Length, 3” Spindle Bore, Spindle Speeds to 2000 RPM, HAAS CNC Pendant Control, Chip Guard, Tool Post, Tailstock, Floppy Drive, sn:69016, mfg.11/2004 Installed New 2005
MILLING MACHINES(2) ALLIANT Variable Speed Vertical Milling Machines with 9” x 48” Work Tables, R-8 Spindle Speeds Variable to 3000 RPM, Lubrication, sn:80713274 & sn:80713273
LAGUN Model FTV-1 Vertical Milling Machine, Bridgeport Milling Head with 9” x 48” Work Table, R-8 Spindle Speeds to 2720 RPM, sn:SE-9304
LAGUN Model Republic FTV-2 Variable Speed Vertical Milling Machine with 9” x 48” Work Table, R-8 Spindle Speeds Variable to 4200 RPM, sn:SE-9580
MILWAUKEE Horizontal Milling Machine with Arbor Support, 12” x 56” Work Table, #50 Taper Spindle Speeds to 1500 RPM, sn:31-4383
HURCO CNC Vertical Milling Machine with 9" x 42" T-Slotted Table, Quick Change Spindle Speeds to 4200 RPM, BRIDGEPORT J-Head, Auto-Feed, sn:202842CINCINNATI AVENGER 250T CNC TURNING CENTER
HAAS TL-2 CNC / MANUAL FLAT BED LATHE
(1 OF 2) ALLIANT VARIABLE SPEED VERTICAL MILLING MACHINES
BRIDGEPORT LAGUN VERTICAL MILLING MACHINES
MILWAUKEE HORIZONTAL MILLING MACHINE
HURCO VERTICAL MILLING MACHINE
INSTL NEW2005
107931_6 pager.indd 3 9/22/17 2:47 PM
![Page 4: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/4.jpg)
ALTEC MACHINERY INSPECTION DATE & TIME – MONDAY, OCTOBER 16TH FROM 8:00 A.M. - 4:00 P.M. MDT
4
ENGINE LATHESMONARCH 28” Swing x 72” Centers Engine Lathe with 20” 4-Jaw Chuck, Speeds to 500 RPM, 1.75” Bore, Tailstock & Cross Slide, sn:CBB4547-586
MEUSER 21” Swing x 84” Centers Engine Lathe with 15” 3-Jaw Chuck, Speeds to 1250 RPM, Inch / Metric Threading, 2” Bore, Tailstock & Cross Slide, sn:MOL-40096
YAM 20” Swing x 80” Centers Engine Lathe with 12” 3-Jaw Chuck, Speeds to 1800 RPM, Inch / Metric Threading, 2.25” Bore, Tailstock & Cross Slide, sn:B92018
MEUSER 17” Swing x 44” Centers Engine Lathe with Collet Chuck, 10” 3-Jaw Chuck, Speeds to 1250 RPM, Inch / Metric Threading, Tailstock & Cross Slide, sn:MOL-41210
YAM 16” Swing x 44” Centers Engine Lathe with 5 ‘C’ Collet Closer, 10” 3-Jaw Chuck, Speeds to 1800 RPM, Inch / Metric Threading, Tailstock & Cross Slide, sn:A91757
H-FRAME PRESSESDAKE Model 75H 75 Ton Hydraulic H-Frame Shop Press with Adjustable Rail, 44” Between Uprights, sn:140846
DAKE Model 25H 25 Ton Hydraulic H-Frame Press with Adjustable Rail, 34” Between Uprights, sn:123372
HONESUNNEN Model MBB-1690 Horizontal Honing Machine, Cabinet, sn:84484
RADIAL ARM DRILLESSBECO 2' Tool Room Radial Arm Drill with Tool Makers Adjustable Table, Clamping, Spindle Speeds to 1280 RPM, 1.2 HP, sn:3785
YAM 20" SWING X 80" CENTERS ENGINE LATHE
MEUSER 17" SWING X 44" CENTERS ENGINE LATHE
YAM 16" SWING X 44" CENTERS ENGINE LATHE
(1 OF 2) DAKE HYDRAULIC H-FRAME PRESSES
INSPECTION DEPARTMENTIncluding: CLAUSING Optical Comparator ● SHEFFIELD CORDAX Coordinate Measuring Machine with Renishaw Probe ● 20” x 44” Micro Flat T-Top Granite Surface Plate ● CADILLAC Gage ● Micrometers ● Calipers ● Pin Gage Sets ● Other Assorted Inspection
72” x 120” Heavy Duty Steel Layout Table
POWERMATIC 19" VERTICAL BANDSAW
SUNNEN MBB-1690 HORIZONTAL HONING MACHINE
ESSBECO 24" X 24" COLUMMN TOOL ROOM RADIAL ARM DRILL
107931_6 pager.indd 4 9/22/17 2:47 PM
![Page 5: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/5.jpg)
ALTEC AUCTION SALE DATE & TIME – TUESDAY, OCTOBER 17TH @ 10:00 A.M. MDT. EST
5
TOYOTA 5,000LB PROPANE FORKLIFT
VERTICAL BANDSAW, SURFACE GRINDER, BELT
SANDERS, ETC.POWERMATIC 19” Vertical Bandsaw with Variable Band Speeds, 24” x 24” Tilt Worktable, Blade Welder & Grinder, sn:1-1812
BOYAR SCHULT 6” x 12” Hand Feed Surface Grinder with Permanent Magnetic Chuck, Work Light & Cabinet Base, sn:10661
POWERMATIC 6” Belt Sander with Worktable
Numerous Double End Pedestal Grinders ● Carbide Grinder ● CUTTER MASTER Model FCG-30 Tool & Cutter Grinder & Sharpener, sn:01407B ● TRINCO Dry Blast with Gloves & Reclaim ● BURRBENCH Vibratory Finisher
SEVER-ALL #1A 15” Metal Chop Saw with Layout Table, sn:1A1567
SHEETMETAL FABRICATINGIncludes Di-ACRO Notcher, sn:1-1008 ● 24” Finger Brake ● Di-ACRO Single End Punch, sn:2855 ● 24” Shear ● Etc…
AIR COMPRESSORSSAYLOR BEALL 7.5 HP Reciprocating Air Compressor with Holding Tank, sn:C-3774-NH
EMGLO 15 HP Reciprocating Air Compressor with Holding Tank, sn:00698001
FORKLIFTTOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours, sn:61010
MISCELLANEOUS & TOOLING
Complete Tool Crib with #40 Taper Tool Holders ● Collets ● (3) SONICOR Ultrasonic Cleaners ● Drills ● Endmills ● Taps ● Reamers ● Carbide ● Hand & Electric Hand Tools ● Grinding Wheels ● Vises ● Tie Down Tooling ● R-8 Tooling ● Angle Plates ● Lathe Tooling ● Pallet Jacks ● Plant Support Furniture ● Cabinets & Racks ● Office Furniture ● Etc…
107931_6 pager.indd 5 9/22/17 2:47 PM
![Page 6: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/6.jpg)
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – North Carolina License #6625 * 6003
DIRECTIONS: Exit Airport to Gibson Blvd SE continue for 2.5 miles. Turn left onto Louisiana Blvd SE. Turn right onto Southern Ave SE for 1.2 miles. Turn left onto Pennsylvania St SE. Turn right onto Trumbull Ave E. Right onto Wyoming Blvd SE, then continue back onto Trumbull Ave SE. Plant will be on the left. Follow auction signs.
HOTELSCOURTYARD MARRIOTT 1920 Yale Blvd. SE - Albuquerque, NM 87106 (505) 843-6600
HOLIDAY INN EXPRESS 10330 Hotel Ave NE - Albuquerque, NM 87123 (505) 275-8900
UPCOMING AUCTIONSTHURSDAY, OCTOBER 19th - Alpha Mold WestHigh End Mold & Die Mfg FacilityOnsite / OnlineBroomfield, CO
PUBLIC AUCTIONPLANT CLOSED
ALTECHAAS CNC & MANUAL MACHINE SHOP
ALBUQUERQUE, NMTUESDAY, OCTOBER 17TH
@ 10:00 A.M. MDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
PRIVATE SALECOMPLETELY RENOVATED CAPE CANAVERAL CONDO
Ocean Front Furnished 2 Bedroom Condo, Swimming Pool, Jacuzzi, Work Out Room, Garage, Tennis Courts,
Quiet But Near Everything! Priced at $450,000
Call 704-905-0341 for More Information
MEUSER 21" SWING X 84" CENTERS ENGINE LATHE HURCO SPIRIT 40 SLV CNC VERTICAL MACHINING CENTER
107931_6 pager.indd 6 9/22/17 2:47 PM
![Page 7: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/7.jpg)
Turn
in
g Your Assets into Dollars
Public Auction #2PLANT
CLOSED
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
PLANT CLOSED
ALPHA MOLD WESTHIGH END MOLD & DIE MANUFACTURING FACILITY7005 WEST 116TH AVE - BROOMFIELD, CO 80020
THURSDAY, OCTOBER 19TH @ 10:00 A.M. MDTInspection: Wednesday, October 18th, From 8:00 A.M. - 4:00 P.M. MDT
>CHARMILLES ROBOFIL
510P CNC WIRE EDM
<MITSUBISHI DM-800G HIGH SPEED CNC GRAPHITE VERTICAL MACHINING CENTER
HPM UNIVERSAL 225, 225 TON HORIZONTAL PLASTIC INJECTION MOLDING MACHINE
OKK MCV-660 CNC VERTICAL MACHINING CENTER
#50
2015 2000
LOWHOURS
107931_Alpha.indd 1 9/22/17 1:06 PM
![Page 8: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/8.jpg)
ALPHA MOLD MACHINERY INSPECTION DATE & TIME – WEDNESDAY, OCTOBER 18TH FROM 8:00 A.M. - 4:00 P.M. MDT
2
MITSUBISHI DM-800G HIGH SPEED CNC GRAPHITE VERTICAL MACHINING CENTER
OKK MCV-660 VERTICAL MACHINING CENTER
BOSTOMATIC 8012G HIGH SPEED CNC GRAPHITE VERTICAL MACHINING CENTER2015
2000
HIGH SPEED CNC GRAPHITE VERTICAL MACHINING CENTERS
MITSUBISHI Model DM-800G High Speed CNC Graphite Vertical Machining Center with 20” x 36” Table, 31.5” X-Axis Travel, 19.7” Y-Axis, 21.3” Z-Axis, #HSK-E40 Taper High Speed Spindle Speeds to 20,000 RPM, BLUM Laser Tool Monitoring, Renishaw Parts Probe, 24 ATC, MITSUBISHI M700 CNC Control with Remote Pulse Generator, sn:61MM00075, mfg.04/2015 * DONALDSON TORIT DF02-2 (MC) Dust Collector with Auto Cleaning, sn:10340546-L2 (May Be Sold Separate)
BOSTOMATIC Model 8012G High Speed CNC Graphite Vertical Machining Center with 13” x 16” Table, 15” X-Axis Travel, 15” Y-Axis, 15” Z-Axis, #ATC 2-25-20 High Speed Spindle Taper Speeds Approx. to 30,000 RPM, 6 Position ATC, BOSTOMATIC (AGIE CHARMILLES) CNC Control with Pulse Generator, Self-Contained Dust Collection System, sn:12-601, mfg.03/2000
CNC VERTICAL MACHINING CENTERSOKK Model MCV-660 CNC Vertical Machining Center with #50 Taper Spindle Speeds to 4500 RPM, 25-1/2” x 67” Table, 59” X-Axis Travel, 26” Y-Axis, 25” Z-Axis, 24 ATC, Coolant & Neomatic 635 CNC Pendant Control with Pulse Generator, sn:393
OKK Model VM5II CNC Vertical Machining Center with #50 Taper Spindle Speeds to 8000 RPM, 22” x 41” Table, 40” X-Axis Travel, 20” Y-Axis, 20” Z-Axis, 20 ATC, Coolant, Full Enclosure & Neomatic 635 CNC Pendant Control with Pulse Generator, sn:255
HURCO Model VM1 CNC Vertical Machining Center with #40 Taper Spindle Speeds to 8000 RPM, 14” x 30” Table, 26” X-Axis Travel, 14” Y-Axis, 18” Z-Axis, 16 ATC, Coolant & Full Enclosure, Max CNC Pendant Control, sn:H-Y11164, mfg.2005
OKK VM5II CNC VERTICAL MACHINING CENTER
Download a lot book at www.asset-sales.com
#50
107931_Alpha.indd 2 9/22/17 1:06 PM
![Page 9: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/9.jpg)
ALPHA MOLD AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 19TH @ 10:00 A.M. MDT
3
HURCO VM1 CNC VERTICAL MACHINING CENTER
2005
WIRE & SINKER EDM MACHINES, HOLE POPPERCHARMILLES Robofil 510P CNC Wire EDM with Auto Wire Thread, 28” X-Axis Travel x 16” Y-Axis x 16” Z-Axis, Chiller, Full Enclosure, CHARMILLES CNC Control with Remote Pendant, sn:560137, mfg.2000
(2) AGIE Mondo Star 50 CNC Sinker EDMs with 29” x 21” Work Table, 19” X-Axis Travels, 13.7” Y-Axis, 13.7” Z-Axis, 33” x 25” x 12 Max Work Piece Size, System 3R Tooling, 32 Position ATC, AGIE Futura V CNC Controls, sn:M50STAR001178 ● snM50STAR001127
RAYCON 35 AMP Manual Sinker EDM Model BE35 with 12” x 20” Work Table, 21” x 29” x 15” Max. Work Piece & Tank Size, PLC Digital Depth Controls, System 3R, sn:1018
GENSPARK Model T15 Hole Popper EDM Small Hole Drill with 12” x 17” Work Table, Approx. 9” Depth, 3-Axis Digital Readouts & Control, sn:050704, mfg.9/2005
WESTHOFF Precision Horizontal Drill with 8-1/2” x 8-1/2” Work Table, Variable Spindle Speeds & Travels, sn:WM100-1-921056
CHARMILLES ROBOFIL 510P CNC WIRE EDM
(1 OF 2) AGIE MONDO STAR 50 CNC SINKER EDMS
RAYCON 35 AMP MANUAL SINKER EDM
GENSPARK T15 HOLE POPPER EDM SMALL HOLE DRILL
WESTHOFF PRECISION HORIZONTAL DRILL
2000
2005
2AVAIL.
107931_Alpha.indd 3 9/22/17 1:06 PM
![Page 10: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/10.jpg)
ALPHA MOLD MACHINERY INSPECTION DATE & TIME – WEDNESDAY, OCTOBER 18TH FROM 8:00 A.M. - 4:00 P.M. MDT
4
VERTICAL PLASTIC INJECTION MOLDERENGEL 85, 85 Ton Vertical Plastic Injection Molder Model ES330H/85US with 38” Diameter 180° Rotary Table, 3.7oz Shot Size, ENGEL CNC Control, sn:71409-085-03, mfg.2003
HORIZONTAL PLASTIC INJECTION MOLDERS
HPM Universal 225, 225 Ton Horizontal Plastic Injection Molding Machine Model 1225-900, Toggle Series with 22-3/4” x 22-3/4” Between Tie Bars, Drilled & Tapped Platens, 13.27oz Shot Size, BARBER COLMAN CNC Controls, sn:12733 (2,866 Hrs.)
HPM Universal II 95, 95 Ton Horizontal Plastic Injection Molding Machine Model 195-330A 35MM, Toggle Series with 16” x 16” Between the Bars, Drilled & Tapped Platens, 4.9oz Shot Size, HPM Command 4000 CNC Controls, sn:13412, Installed 2001 (10,441 Hrs.)
HPM UNIVERSAL 225, 225 TON HORIZONTAL PLASTIC INJECTION MOLDING MACHINE
HPM UNIVERSAL II 95, 95 TON HORIZONTAL PLASTIC INJECTION MOLDING MACHINE
ENGEL 85, 85 TON VERTICAL PLASTIC INJECTION MOLDER
2003
HAITIAN HTF60W-II 67 TON HORIZONTAL PLASTIC INJECTION MOLDING MACHINE
NISSEI PS40E5ASE 40 TON (APPROX) HORIZONTAL PLASTIC INJECTION MOLDING MACHINE
2007
HAITIAN Model HTF60W-II 67 Ton Horizontal Plastic Injection Molding Machine with 12” x 12” Between Tie Bars, Drilled & Tapped Platens, 2.8oz Shot Size, KEBA CNC Controls & HY Robotics Model TOP IV-XC550 Robotic Parts Picker, sn:06102822 (may be sold separate), Machine sn:0707-006017007, mfg.2007 (Low Hrs.)
NISSEI Model PS40E5ASE 40 Ton (Approx.) Horizontal Plastic Injection Molding Machine with 12” x 12” Between Tie Bars, Drilled & Tapped Platens, 1.48oz Shot Size, Manual / PLC Controls & Hy Robotics Model TOP IV-XC650 Robotic Parts Picker, sn:0709D311 (may be sold separate), Machine sn:E04L343
LOWHOURS
LOWHOURS
107931_Alpha.indd 4 9/22/17 1:06 PM
![Page 11: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/11.jpg)
ALPHA MOLD AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 19TH @ 10:00 A.M. MDT
5
NISSUI FNSK-15SC GRANULATOR & CONAIR JC-814 GRANULATOR
CONAIR PORTABLE DRYER WITH HOPPER
MOLD SUPPORT EQUIPMENTNISSUI Model FNSK-15SC Granulator with 23” Wide Opening, sn:F15845
CONAIR Model JC-814 Granulator with 13-3/4” Wide Opening, sn:67318
NOVATEC Portable Dryer with Hopper Model RRB with Process Temperature Controller, sn:8-0672-0026
CONAIR Portable Dryer with Hopper Model CH10-1.5, SC-15 Small Carousel Dryer Control, sn:131997
NOVATEC Model MD-15 Dryer with Venturi Loader, Digital Process Temperature Controller, sn:3A0781-1980
DRI-AIR Model ARID-X10 Dryer with Hopper Load, Digital Process Temperature Controls, sn:D10234
GAMMAFLUX 7 Zone Mold Temperature Controller
BUDGET Molders Supply 12 Zone Mold Temperature Controller
Numerous CONAIR TEMPRO & STERLCO Water Temperature Control Units, CONAIR Vacuum Pump, Hoppers, Clamp Tooling, Manifolds & Other Support Equipment
CHILLERSTEMPTEK 5 Ton Chiller Model CF-7.5W-410A with Digital Controls, sn:136027, mfg.2014
CONAIR Cooling Tower & Pump System with 3 Pumps, 180 Gallon Tank & Holding Structure, Process Controls & Skid Mounted, mfg.2005
FURNACESL&L KILNS Model GS1714 Electric Furnace with 16” W x 12” H x 14” Deep Heat Area, Temperature Ranges to 2350° F, Model 3K DNA-TROL Multi-Zone Programmable Controls, sn:GSA312110T, mfg. 2013
HUPP-CO Electric Furnace with 10” W x 14” H x 18” Deep Heat Area, Temperature Ranges to 2000°F, Model 2304 FC-TM, sn:538
HORIZONTAL BORING MILLKURAKI 4” Table Type Horizontal Boring Mill Model KBT-1003W with 41” x 47” Rotary Table, Approx. 62” Cross Travel, 54” Vertical, #50 Taper Spindle Speeds to 1200 RPM, Built-In Saddle Supports, Way Covers, Pendant Control & 4-Axis Digital Readouts, sn:2187
NOVATEC PORTABLE DRYER WITH HOPPER
TEMPTEK CF-7.5W-410A 5 TON CHILLER
L&L KILNS GS1714 ELECTRIC FURNACE & HUPP-CO ELECTRIC FURNACE
KURAKI 4" TABLE TYPE HORIZONTAL BORING MILL
Download a lot book at www.asset-sales.com
2014
2013
GREATCOND
107931_Alpha.indd 5 9/22/17 1:06 PM
![Page 12: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/12.jpg)
ALPHA MOLD MACHINERY INSPECTION DATE & TIME – WEDNESDAY, OCTOBER 18TH FROM 8:00 A.M. - 4:00 P.M. MDT
6
MILLING MACHINES(2) BRIDGEPORT Variable Speed Vertical Knee Mills with 9” x 42” Power Feed Tables, R-8 Spindles Speed Variable to 4200 RPM, sn:259133 with ACU-RITE Quikcount II Digital Readouts, sn:474691089Y with Shars SDS6-24 Programmable Digital Readout
BRIDGEPORT Variable Speed Vertical Knee Mill with 9” x 48” Power Feed table, R-8 Spindle Speeds Variable to 4200 RPM, sn:272249 with ACU-RITE Millmate 2-Axis D.R.O.
SURFACE GRINDERSCHEVALIER Model FSG-1640AD 16” x 40” Automatic Hydraulic Surface Grinder with 16” x 40” Electro Magnetic Chuck, Incremental Downfeed, Pendant Controls, Paper Filtration Coolant System, Over Wheel Dresser, sn:34795001
(2) CHEVALIER FSG-618M 6” x 18” Hand Feed Surface Grinders with 6” x 18” Permanent Magnetic Chucks, Work Lights, SONY/SOKKI 2-Axis Digital Readouts, sn:A3814013 ● sn:A3873040
HARIG 6” x 12” Hand Feed Surface Grinder with Walker Ceramax 6” x 12” Permanent Magnetic Chuck, sn:17003
PARKER MAJESTIC 6” x 12” Hand Feed Surface Grinder with Electro-Magnetic Tilt Sign Chuck & Control, sn:1561-SC-64
DAREX Model E90 Tool & Cutter Grinder, sn:92607
DAREX Double End Drill Sharpener, sn:501886
Assorted Double End Pedestal & Disc Grinders
(5) DONALDSON TORIT Dust Collectors, Magnetic Rotary Tables, Numerous 18” x 12”, 18” x 8”, 15” x 10” Permanent Magnetic Chucks, Grinding Wheels, Etc…
(2 OF 3) BRIDGEPORT VARIABLE SPEED VERTICAL KNEE MILLS CHEVALIER FSG-1640AD 16" X 40" AUTOMATIC HYDRAULIC SURFACE GRINDER
(2) CHEVALIER FSG-618M 6" X 18" HAND FEED SURFACE GRINDERS
(5) DONALDSON TORIT DUST COLLECTORS
(2) CHEVALIER FSG-618M 6" X 18" HAND FEED SURFACE GRINDERS
3AVAIL.
2AVAIL.
2AVAIL.
5AVAIL.
107931_Alpha.indd 6 9/22/17 1:06 PM
![Page 13: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/13.jpg)
ALPHA MOLD AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 19TH @ 10:00 A.M. MDTT
7
JIG GRINDERMOORE #2 Jig Grinder, Model 1844439 with 10” x 19” Work Table, (2) Heads, MOORE Workbench & Tooling (May Be Sold Separate), sn:CY6244
BANDSAWSDOALL Contour-Matic “16” 16” (32”) Vertical Bandsaw with 24” x 30” Infeeding Table, Table Tilt, Variable Blade Speeds, Blade Welder & Grinder, sn:50-56511
DOALL 12” x 20” x 12” Rounds Horizontal Bandsaw with Variable Feed Control, Work Vise & Coolant, Model C41-A, sn:86-54142
WELLS Model 8M 8” x 16” Portable Horizontal Bandsaw with Work Vise, sn:14662
WALKER TURNER 14” Vertical Bandsaw with 16” x 16” Tilt Worktable
INSPECTIONMICRO-VU Model #14 Optical Comparator with 5” x 18” Table, MICRO-VU Q16 Computer Controls, sn:3483
36” x 36” STARRETT Granite Surface Plate with Stand
(5) 24” x 36” Granite Surface Plates with Stands
Numerous Other Granite Surface Plates, Pin Gages, ROCKWELL Hardness Tester, Calipers, Microscopes, Gage Clock Sets, Etc…
WELDING & WELD TABLES, DRY BLAST CABINET
MILLER Syncrowave 250 Welder with Radiator, Weld Gun, Remote Foot Control, sn:KA900825
5’ x 5’ Acorn Weld Table
Other Assorted Heavy Duty Steel Work Tables, Etc.
TRINCO Dry Blast Machine with Reclaim
MOORE #2 JIG GRINDER DO ALL 12" X 20" X 12" ROUNDS HORIZONTAL BANDSAW
DOALL CONTOUR-MATIC 16" VERTICAL BANDSAW
WELLS 8" X 16" PORTABLE HORIZONTAL BANDSAW & WALKER TURNER 14" VERTICAL BANDSAW
MICRO-VU OPTICAL COMPARATOR (5) 24" X 36" GRANITE SURFACE PLATES WITH STANDS
ASSORTED WELDING, TRINCO DRY BLAST MACHINE, OTHER ASSORTED MACHINERY
Want to Sell Your Shop or Know Someone Who Does? Call Us Toll Free at (888) 800-4442!
We Pay Great Finder’s Fees!
5AVAIL.
CLEAN
107931_Alpha.indd 7 9/22/17 1:06 PM
![Page 14: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/14.jpg)
ALPHA MOLD MACHINERY INSPECTION DATE & TIME – WEDNESDAY, OCTOBER 18TH FROM 8:00 A.M. - 4:00 P.M. MDT
8
BRIDGE CRANE WITH RUNWAY, SUPPORTS
5 Ton x 9’ SHAW-BOX Top Running Bridge Crane with 15’ Runways & Supports, Approx. 12’ Under Hook, Pendant Control & Additional 5 Ton BUDGIT Chain Fall
AIR COMPRESSORSINGERSOLL RAND Model T30 20 HP Reciprocating Air Compressor with Holding Tank, sn:30T917331
GARDNER DENVER 15 HP Electra-Screw Rotary Screw Air Compressor with Holding Tank & Auto Sentry-S Controls, sn:M70802
BELAIR FRIULAIR Air Dryer, Model ACT125-1, sn:7570-125-11-25-2008
FORKLIFT & MATERIAL HANDLING
CLARK 4,000lb Capacity Propane Forklift with Propane, 4 Tires, 42” Forks with Side Shift, 3-Stage Mast, Model C500 H45, sn:H355-76-2817-2-75
Portable Man Platform Lift
CROWN Electric Platform Die Cart
2 Ton Cherry Picker ● 32” Square Adjustable Die Cart ● Numerous Heady Duty Die Storage
Racks ● 8,000lb Capacity (Total) 4 Level Die Storage Rack with Roll Out Shelves ● Self Lock ● Etc…
STAKEBODY TRUCK, ATV 4-WHEELER
CHEVROLET Scottsdale Dual Wheel Stake Body Truck with Automatic Transmission, Gasoline, 10’ Deck, Aluminum Stake Sides, Dual Rear Wheels, VIN#1GBHC34K1LE192807, mfg.1990, 179,000 miles on Odom, Approx. 80,000 Miles on Replaced Engine
POLARIS Xplorer 400 4x4 ATV 4-Wheeler with Winch & Snow Shovel Attachments, Automatic Variable Transmission, VIN# 4XACG38C5YA303930
MISCELLANEOUSLarge Assortment of Steel Worktables, Work Benches, Pallet Racking, Shop Cleaning Equipment, Eye Bolts & Shackles, Magnets, Pneumatic & Electric Hand Tools, Foredom Flex Grinders, Wrenches, Collets, #40 & #50 Taper Tool Holders & Carts, Numerous KURT Vises, Sign Plates, Number & Letter Stamps, Angle Plates, 2-Door Cabinets, VIDMAR & Blue Print Cabinets, Office Furniture with Conference Table & Chairs, 21+ Butcher Block Work Benches, TOSHIBA Multi-Line Telephone System with Handsets, Etc….
5 TON 9' SHAW-BOX TOP RUNNING BRIDGE CRANE
CLARK 4,000LB CAPACITY PROPANE FORKLIFT
INGERSOLL RAND T30 20HP RECIPROCATING AIR COMPRESSOR
GARDNER DENVER 15HP ELECTRA-SCREW ROTARY SCREW AIR COMPRESSOR
CHEVROLET SCOTTSDALE DUAL WHEEL STAKE BODY TRUCK
5TON
4000LB
www.asset-sales.com
107931_Alpha.indd 8 9/22/17 1:06 PM
![Page 15: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/15.jpg)
ALPHA MOLD AUCTION SALE DATE & TIME – THURSDAY, OCTOBER 19TH @ 10:00 A.M. MDTT
9
107931_Alpha.indd 9 9/22/17 1:07 PM
![Page 16: 2 Public Auctions - Asset Sales · TOYOTA 5,000lb Propane Forklift Model 42-6FGU25 with 3-Stage Mast, 36” Forks with Side Shifter, (4) Pneumatic Tread Tires, Lights, 443 Hours,](https://reader034.vdocuments.site/reader034/viewer/2022042021/5e78a8e41f40360e2529f3fa/html5/thumbnails/16.jpg)
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – North Carolina License #6625 * 6003
MITSUBISHI DM-800G HIGH SPEED CNC GRAPHITE VERTICAL MACHINING CENTER
DIRECTIONS FROM DENVER AIRPORTExit Airport to E-470 North. Keep Left to continue on Northwest Pkwy. Take exit 52 to merge onto W. Dillon Rd toward US-287 / Lafayette / Broomfield. Take US-287 S for 1 mile. Turn right onto Main St for .5 miles. Turn right onto W 116th Ave. Plant will be on the right. Follow auction signs.
HOTELSSPRING HILL SUITES BY MARRIOTT 6845 W. 103rd Ave. - Westminster, CO 80021 (303) 464-1999
HOLIDAY INN & SUITES DENVER AIRPORT 6900 Tower Rd. - Denver, CO 80249 (303) 574-1300
UPCOMING AUCTIONSTUESDAY, NOVEMBER 14th - Troxel IndustriesMazak CNC Machining & FabricationOnsite / OnlineTilton, IL
PRIVATE SALECOMPLETELY RENOVATED CAPE CANAVERAL CONDO
Ocean Front Furnished 2 Bedroom Condo, Swimming Pool, Jacuzzi, Work Out Room, Garage, Tennis Courts,
Quiet But Near Everything! Priced at $450,000
Call 704-905-0341 for More Information
PUBLIC AUCTIONPLANT CLOSED
ALPHA MOLD WESTHIGH END MOLD & DIE MANUFACTURING
BROOMFIELD, COTHURSDAY, OCTOBER 19TH
@ 10:00 A.M. MDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.
All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable
to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.
Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.
REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
PresortedFirst Class Mail
U.S. PostagePAID
Kokomo, INPermit No. 154
2015
107931_Alpha.indd 10 9/22/17 1:07 PM