2 line, tie and lacing wires - hampton steel · 2015. 10. 20. · bs 4102 • galvanised to bs en...
TRANSCRIPT
![Page 1: 2 Line, Tie and Lacing Wires - Hampton Steel · 2015. 10. 20. · BS 4102 • Galvanised to BS EN 10244-2 Class D as standard • Green or Black plastic coated as standard Tensile](https://reader035.vdocuments.site/reader035/viewer/2022071505/6125e56c40231773996c236b/html5/thumbnails/1.jpg)
Typical Coil Weights (kg) Typical Coil Lengths (metres)
Galvanised Class ASoft: 350-550 N/mm2 25 10 5 1 0.5 78 65 52 39 26
1.60mm ✔ ✔ ✔ ✔ ✔ 1.90mm ✔ ✔ ✔ ✔ ✔ 2.00mm ✔ ✔ ✔ ✔ ✔ ✔ 2.50mm ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3.00mm ✔ ✔ ✔ ✔ ✔3.15mm ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3.55mm ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔4.00mm ✔ ✔ ✔ 5.00mm ✔ ✔ ✔6.00mm ✔ ✔ ✔Hard: 600-800 N/mm2 2.00mm ✔ ✔ ✔ 2.50mm ✔ ✔ ✔ 3.00mm ✔ ✔ ✔ 3.15mm ✔ ✔ ✔ 4.00mm ✔ ✔ ✔ High Tensile: 1050 N/mm2 (min) 1.60mm ✔ ✔ ✔ 2.00mm ✔ ✔ ✔ 2.50mm ✔ ✔ ✔ 3.15mm ✔ ✔ ✔ Galvanised Class D Soft: 350-550 N/mm2
0.90mm ✔ ✔ ✔ ✔ ✔ 1.00mm ✔ ✔ ✔ ✔ ✔ 1.25mm ✔ ✔ ✔ ✔ ✔ 1.70mm ✔ ✔ ✔ ✔ ✔ 2.00mm ✔ ✔ ✔ ✔ ✔
Line, Tie and Lacing WiresSuitable for a variety of commercial applications, Hampton’s coiled wire is available in a wide choice of specifications, grades and finishes.
21CALL +44 (0)1933 234070 EMAIL: [email protected] www.hamptonsteel.co.uk
Galvanised Wire
• Wire produced to BS 4102
• Galvanised to BS EN 10244-2
• Available in a choice of specifications
• Easy to handle
• Choice of coil weights
Plastic Coated Wire
• Core wire manufactured to BS 4102
• Galvanised to BS EN 10244-2 Class D as standard
• Green or Black plastic coated as standard
Tensile Line Wire (mm) Barbing Wire (mm) Twist Typical Roll Length (metres)
Mild Steel 2.50 2.00 Conventional 200
High Tensile 1.60 1.45 Reverse 200 to 2000
High Tensile 2.00 1.90 Reverse 200 to 2000
Line, T
ie and
Lacing
Wires
High Tensile
™