Proudly designed and developed by an Australian

Global warming, pollution and land degradation should be of a concern to all

of us as we only have one planet to live on.

Mankind has been destroying the Earth to obtain its natural resources for

centuries and now at an ever increasing rate as the worlds population grows.

We have already brought to extinction countless species of animals and

destroyed 90% of the planets natural rain forests.

Over cultivated our valuable farm lands, turning the land barren as salinity

rises, which is then unable to support crop growth or pastures for grazing.

Over fished and polluted our seas and rivers, depleted our fresh water

supplies by global warming and climate change.

Many of our major cities have air that is so full of pollutants it’s hardly fit to

breathe and this pollution is causing dramatic health issues for the population

which in turn increases the strain on our medical services.

One wonders where its all going to end ?

UBS set out on a mission to develop a Construction System that would

reduce the amount of carbon emissions into our atmosphere and decrease the

total amount of raw materials used in construction.

Any construction method utilizing innovative technology and products that can deliver structurally superior, faster build, environmentally friendly materials combined with substantial savings on building costs into one total package has to be taken seriously.

UBS Advanced Technologies has developed a exceptional building solution system that combat environmental issues associated within the construction Industry.

. UBS has addressed the issues of both manufacturing building materials and how these materials are used within the construction process itself.

Our new advanced building system is not only superior, reducing build times by up to 70%, its also extremely cost effective, with savings on construction starting at around 30% to 50% below normal conventional building costs.

Delivering buildings that are structurally stronger, energy efficient and environmentally friendly .

Any competent Architect, Engineer or Construction Professional can easily understand this technology as its internal structure works on the principals of column and beam construction.

Advancements with our technology have made the system so easy to use that semi & non skilled workers can construct a building with ease.

Universal Building Solutions technology comprises of a rigid cellular fire retardant high quality insulation material designed to act as a integrated prefinished formwork. Our advanced technology includes, columns and beams, flooring, wall, ceiling, and roofing systems. (a total building system) UBS combines normal engineering practices within a new superior construction method know as a Integrated Building System (IBS). IBS provides greater flexibility in all aspects of construction enabling Architects and Engineers to design lightweight yet structurally stronger Eco friendly energy efficient buildings. Engineered originally for Green energy efficient Eco friendly housing construction UBS advanced production manufacturing processes can now provide products to suit all construction requirements. UBS can be engineered specifically for earthquake and cyclone regions with ease. Technology based on normal column and beam engineering principals that now enables construction companies to complete projects up to 70% faster, structurally superior and less expensive buildings.

“ It's my opinion that your Integrated Building System (IBS) is the best I've seen (AND

I"VE SEEN A LOT!!). As you know I have been involved with a number of construction

system that use Integrated EPS form work. I understand all the benefits this style of

construction system has to offer, such as speed of construction, simplicity of use, cost

savings and most importantly energy savings. ( ECO Friendly Green Technology )”

A number of innovative improvements with your technology stand out from other systems I've

seen.

One such improvement is the use of Magnesium Oxide material as a coating. Magnesium Oxide

cements are growing in popularity worldwide as it's understood, healthier to be in-contact with,

more robust than cement and far stronger, not to forget the fire retardant benefits.

As you rightly stated, research has shown it to be 2 - 3 times stronger. Its impervious to Fire

and Water, and as an added bonus mold won't grow on it ! So all round it's a great

development. The machine you developed for the preparation of the EPS surface to minimize

any chance of de-lamination is simple but effective and this, combined with the way your

machine applies the coating mixture, creates an excellent bond to the EPS. Developments on

how you can cut core holes within the EPS block and panels any size or configuration without

penetrating the outer surface enables engineers the freedom to utilize UBS products in almost

any type of construction project. and this combined with how you can adjust the thickness of

the coating between 3mm to 20mm is outstanding.

Dr Iain Gray

Chief Foreign Architect and Master Planner

South China Architectural Design & Research Institute

Guangzhou Guangdong China

The UBS system combines new technology with known engineering practices, by

combining proven construction materials in a way that is easier to handle and faster

to use .

There is nothing new about column and beam construction. (been used for hundred of years) Nothing new about concrete and reinforcing steel. (been used since 1853)

Nothing new about EPS as an Installation material . (been used since 1908) Nothing new about the use of Magnesium Oxide cement. (Mgo) (used for more than 800 years) Mgo coatings and boards are now becoming popular as a fire proofing material within construction throughout the world .

What is new is how all these elements are brought together to provide a

faster ,stronger, money saving , Greener and far superior construction

system

UBS has developed a manufacturing system to produce a wide range of building

materials from the one fully adjustable versatile plant.

1)Wall block and panel systems

2)Fence panels – including LED lighting where required (panels only 40mm thick)

3)Flooring panels – suspended slab integrated formwork where the underside

becomes the ceiling of the room below.

4)Roofing panels - that can become the ceiling of the room below.

5)Columns and Beams - sizes as required

6)Under slab pod system – which reduce the amount of concrete used.

7)Magnesium Oxide board (MgO) wall board and MgO structural flooring boards

A large number of additional products can be manufactured if required.

For example:

1)Interior wall insulation

2)Roofing insulation

3)Foundation insulation

Total versatility and flexibility with simple adjustments to the machines.

Expanded Polystyrene foam is a versatile plastic insulation product offering excellent insulation properties at a low cost.

Available in a wide range of densities for residential commercial and industrial applications such as foundations ,walls, ceilings and roofing materials.

UBS standard block system has a R-Value of 7.4 and is available in custom blocks and panels that are designed to make all forms of construction easier.

EPS Contains no CFC’s, HCFC’s, HFC’s or formaldehyde . It is inert non-nutritive and highly stable , and therefore will not decompose , decay or produce undesirable gases or leachates.

EPS is 100% recyclable so there is no wasted materials within the manufacturing process .

UBS specially formulated Magnesium Oxide coating applied to the EPS system has

been specifically designed to make a positive impact on the environment. Known as

MgO it is a GREEN building product that is used as a

Coating used on our products has benefits such as

• Fireproofing • Waterproof, and impact resistant • Insect and rodent resistant • Environmentally friendly

• Fireproofing additive • Alternative to Gypsum board • Alternative to plywood • Alternative to cement and plaster

Raft Slab System

There are a number of ways to prepare foundations and slabs for a new building.

One new and effective method is know as a Pod or Raft slab system . The raft system

comprises of a number of EPS pods being placed on a prepared site after all ground

work and plumbing has been installed. Plastic sheeting is set down on the site after

white ant treatment has been completed. Pods are then place in a way that they form

horizontal beams running perpendicular throughout the slab. Rebar is placed within

these beams as well as the starter bars for the UBS wall system. This type of slab

system saves cost in concrete and footings.

The entire system is easy to set up and dramatically reduces the amount of concrete needed. The slab has a series of vertical beams running perpendicular providing strength and stability while a bond beam or footing is formed around the external edge of the slab.

External footing for the Raft slab are easily formed, once the rebar is in place starter bars are tied into the footings steel work left protruding 300mm above the completed slab height. Starter bars are easily positioned correctly using a flexible template. External formwork is put into place before the concrete is pored.

UBS wall block are designed to replace the

time consuming and rigorous task of laying

hundreds of bricks / blocks, installing

insulation then rendering a wall, by installing

one lightweight block that provides

everything.

Blocks take only minutes to install,

completing work that would take a

tradesmen many hours if not days to

complete.

Because our blocks are machine finished

walls are perfectly true and depending

upon the finish required may only need a

quick skim coat before painting

Wall blocks are positioned over the starter bars and joined to the foundation in a similar method to laying bricks or blocks using Mgo cement. Ste

Reinforcing steel and services such as electrical conduits and water pipes are run through core holes within the wall block as each level of blocks are installed.

All Core holes are then filled with concrete.

This can be completed at each block level or at plate height.

These core holes once filled with concrete and steel rebar form the structural skeleton of the building

UBS method of construction is designed to make every stage of construction

easy reducing costs and accelerating construction build times.

1) Services are run within the wall blocks and panels core holes prior to the

concrete being pored. (Eliminates cutting and chasing walls)

2) Insulation is already situated within the block, our design eliminates thermal

bridging throughout walls, flooring and ceilings. (energy efficient)

3) Fully trafficable steel reinforced flooring and ceiling system. ( Reduced scaffold

and supports needed on site)

4) Machined finished blocks that eliminate the need to screed walls before tiling.

Externally block are joined in a similar fashion to laying bricks or masonry blocks however Mgo cement is used in place of standard cement. Internally within the wall block they are joined together with steel connection bars, inserted between the structural core holes of each block. This procedure of connecting each block ties not only the blocks together, its also ties the internal columns together (once concrete has been poured into the core holes) creating a concrete and steel reinforced connection

UBS has developed technology where it can cut the

structural core holes within its wall block system, any size

and spaced apart as specified by an engineer.

The core hole cutting process is undertaken after the

surface coating procedure has been completed.

This flexibility allows engineers to specify exactly how many

core holes at what spacing's are required to provide the

structural skeleton of the building.

Building can be engineered to suit such requirements as soil

and ground conditions or Earthquake and Cyclonic regions

EPS applications are especially beneficial in diminishing noise transmission in structures such as hotels, condos, multi-family buildings, theatres and structures built near airports and busy roads.

EPS insulation will greatly reduce both heating and cooling costs of your building, there is no better insulation than EPS, It will not lose any of its qualities over time.

UBS blocks can be finished with virtually any type of finishing product required.

The photo on the left shows a textured paint , flat paint and tiled finish on our display walls.

Tiles can be applied directly to the machine finished blocks with a normal tile adhesives.

Very little preparation is needed to apply a painted finishes,.

UBS construction system can

accommodate both conventional

window and door frames as well as

utilizing its own specially designed

window and door system.

Core holes adjacent to window or door frames have concrete and rebar placed within them to completely encase the

frame with concrete.

This forms concrete & rebar reinforced lintels and columns around the frames to further strengthen the structure. UBS specially designed window and door frames act as formwork for the concrete.

Step 5 :

Second floor and roof systems are also tied into the wall system by using steel and concrete, (fittings are concreted into the bond beam formed around the entire wall structure)

UBS is a integrated formwork system (IBS) comprising prefinished blocks and panels.

Its internal core holes and channels provide formwork that is the filled with concrete and reinforcing steel to form the structural skeleton of a building

UBS construction panel can be used for ceilings roofing, additional floors and decking, its fully trafficable and can support the weight of workers with ease.

Floor & roof panel average weight is 57 – 60kg making them easy

to handle and install. (heavy lifting machinery is not required)

Construction panels are internally reinforced with steel tubes and externally reinforced with fiberglass mesh and our special MgO coating covering both sides of the panel.

Steel tubs are used to tie the panels into the structure – run electrical cables through .

Depending on the configuration of the project (how many levels ) this then determines

which panel is used . There are 2 types of pre finished panels (1) load bearing ceiling

and roofing panel (2) load bearing ceiling and flooring Panel

The buildings walls internal columns are tied together using a bond beam system

around the entire structure. Windows and doors have a complete reinforced concrete

surround that encapsulates the entire frame. The bond beam system is used to secure

additional levels or the roofing system by securing steel connection fitting to the

bond beams rebar before the concrete is poured.

The adjacent photo is a section of wall block that has had one side of the block removed to revel the structural advantages of an IBS construction system.

Walls are tied into the sub-structure of a building by steel rebar and concrete.

The entire structure is then tied together by a series of columns' which are then connected by a bond beam surrounding the entire building.

Within the bond beam steel fittings are used to attach the second floor or roofing system.

Structural stability

“ A completely encased building structure providing structural stability and strength”

Fully adjustable thickness of coating to the EPS depending on the Fully adjustable thickness of coating to the EPS depending on the

application products are being used for range between 3mm to 20mmapplication products are being used for range between 3mm to 20mm

In addition to the many benefits this building system delivers, the coating that's applied to the EPS panels has been,

1) Fiberglass mesh reinforced (this preventing any cracking of the walls and ceiling coatings)

2) The EPS is specially prepared prior to coating (to minimize the chance of delamination)

3) Which means a lot less maintenance to our building structures in the future

UBS has developed extra strong coatings for its construction material system.

Using specially formulated Magnesium Oxide based mixtures that provide , mold , mildew, insect , water and fire resistance, with a strength far stronger than cement coatings.

The coating is considered eco friendly and good for the environment.

Its extremely safe to use – unlike cement based materials.

UBS UBS Advanced Technologies Advanced Technologies

Wall and Fencing SystemsWall and Fencing Systems

High speed industrialized wall and fencing systems

29

Proudly designed and developed by an Australian

UBSUBS Advanced TechnologyAdvanced Technology Standard Block Finishing's

Extreme flexibility of this product allows for almost any

finish to be applied directly to its surface.

The machine finished blocks coated with (MgO) that’s

applied to the UBS wall system is ideal for fixing and

adhering many other materials such as tiles or stone panels

directly to its surface.

Cement textured renders and textured paints can be

applied directly to the walls surface, you can even apply a

light skim coat to the blocks upon completion of installation

to have a perfectly flat painted finish if required.

UBS block can be cut using any standard masonry blade

power tool, services such as lighting or power sockets can

be installed simply by placing conduits or pipes within the

structural core holes prior the poring of concrete.

UBSUBS Advanced TechnologyAdvanced Technology

Post and Rail Fence Panel system

UBS has developed technology to manufacture a Eco friendly

fencing system that provides many benefits over conventional

fencing materials commonly used today.

Materials used within our manufacturing process are designed

to be environmentally friendly, as they are manufactured

primarily from low carbon producing structural coatings and

recyclable materials.

Our fence panels will not rust or deteriorate when exposed to

the elements, they are impervious to insects as they offer no

cellulose food matter.

Panels structural coatings have been specially formulated to be

resistant to molds and funguses which commonly cause

problems in damp areas.

The post and rail fencing system has been designed for quick

and easy installation.

Introduction

UBSUBS Advanced TechnologyAdvanced Technology Panel Design Features

UBS panel technology is designed around strength and durability, our panels are

manufactured on a production line to ensure a machine finish.

Each panel is prepared by a mechanical process to minimize any chance of the

coating material delaminating from the EPS core.

As an extra strengthening measure each panel has a fiberglass mesh applied along

with the coating which is designed to prevents cracking and also adding strength.

UBS UBS Advanced TechnologyAdvanced Technology

UBS standard fence panels :

1) Standard flush panel 40 mm thick x 1.8 meters high x 1 meter wide

2) Standard flush panel with integrated LED lighting 300 mm off ground height to

illuminate foot paths.

3) Standard flush panel with integrated LED lighting 230 mm below fence height to

illuminate fence boundary

4) Standard flush panel with 20 mm x 20 mm steel tube reinforcement.

Standard Panels

UBS UBS Advanced TechnologyAdvanced Technology Other Applications

UBS block system is so versatile, an ideal application

for the product is to use the wall block system to

enclose carports, patios, and verandahs.

It’s a simple procedure to turn any patio or carport

into an enclosed room.

Block can be cut to encase support poles so they

become integrated within the wall and out of sight.

Starter bars can be inserted into the concrete slab

simply by drilling holes where required providing an

anchor point for the wall blocks.

Windows and doors are easy to install within the

UBS wall structure.

If a totally Insulated enclosure is required UBS has

developed specific insulated ceiling panels to

accommodate the project.

Services such as lighting or power sockets can be

installed simply by placing conduits or pipes within

the structural core holes prior the poring of

concrete.

UBSUBS Advanced TechnologyAdvanced Technology Future developments

UBS is in the final stages of development where colored

pigments will be added to the MgO coating materials. This

development will allow UBS to manufacture its fencing panel in

a range of permanent colors that will not require painting.

Our commitment to recycling and waist management has seen

developments within our production manufacturing processes

where all off cut waist materials can be recycled and turned

into XPS (Expanded Polly Styrene) material which intern creates

additional products (Turning trash into cash)

Commitment to keeping UBS technology ahead of its

competitors will soon see the completion of new products

where a innovative patented European steel clip lock framing

system will laminated within UBS panels to create a whole new

range of products and possibilities .

“UBS Advanced Technology - a total Building and Construction system”

UBSUBS Advanced TechnologyAdvanced Technology

With ever increasing labor costs and escalating cost of raw materials we are

confident that our technology and product advancements will be kept UBS fencing

in high demand around the Globe.

UBS intension is to develop its business into a Global enterprise by utilizing a

manufactures licensing structure not unlike a franchise system of partners to

promote our products and technologies.

The opportunity offered here is to attract the right partners to become involved

with the company at the grass roots level.

We believe our products to be superior in all aspects to any other product

available on the market at present.

A simple comparisons with existing products marketed today will demonstrate

our products and systems superiority and price competitiveness.

Opportunity

Eco friendly technologies that have

concentrated on environmental issues facing

our world today

UBSUBS Business StructureBusiness Structure

Corporate Structure:

Universal Building Solutions International

Intellectual Property Owner. (Corporation)

Universal Building Solutions Advanced Technology

T/A UBS Advanced Technology

Marketing – Design – Development. (Corporation)

Universal Building Solutions - Master Licensee

Master Licensee Country.

(License package price to be negotiated upon countries demographic analysis)

Universal Building Solutions - Sub – Licensee

Territory licensee within a Country. (License package price $1.2 million USD)

UBSUBS Advanced TechnologyAdvanced Technology

Darryl James Heffernan

Owner : Universal Building Solutions

Phone : +84 944536599 (Vietnam)

Email : darrylheffernan@ymail.com

Email : darrylheffernan@hotmail.com

SKYPE : darryl_heffernan

LinkedIn: Profile

http://darryl-james-heffernan.strikingly.com/

Contact Details

Proudly designed and developed by an Australian