113 low pressure test pump - e instruments 2019 eigfrom devices under test will be pushed out and...
TRANSCRIPT
113 Low Pressure Test Pump
-6 psi to 6 psi
OVERVIEW
The ConST113 Low Pressure Test Pump is a hand operated
pressure pump designed to generate pressures from -6 psi (-0.4
bar) to 6 psi (0.4 bar). A high-quality screw press is designed for
fine pressure adjustment, with an adjustment resolution up to
0.01 Pa (0.0001 mbar). To reach the pressure as stable as
possible during micro-pressure calibrations, an isothermal
bellows chamber is designed for reducing the possible heat
effects caused by environmental temperature change. Without
non-returning valve that is usually used on troublesome hand
pumps, the ConST113 requires minimal maintenance. Two
hand-tight connectors installed on the pump allow easy
connecting and disconnecting to the test pump without the need
for PTFE tape or wrenches. The ConST113 is an ideal
comparison test pump for low pressure applications.
FEATURES
Only 3.5 lb
High Resolution
0.01Pa (0.0001 mbar)
Specially designed screw press for fine pressure adjustment
Great Stability
·
reduce the influence from environmental temperature changes.
Isothermal chamber: the pressure chamber is insulated to
·
excellent stability.
Specially designed bellows minimize leakage to guarantee
Durable and Minimal Maintenance
Without non-returning valve that is usually used on trouble-
some hand pump.
Easy-to-usePressure could be set and adjusted precisely and quickly
through a simple turn of the handle
Hand-tight Connectors
Allows easy connecting and disconnecting to the test
pump without the need for PTFE tape or wrenches
APPLICATIONS
The ConST113 is designed for low pressure application
requiring accurate low pressure testing and calibration. It
can be used in cal ibrat ing low pressure gauges,
transmitters, or other pressure measuring instruments.
SPECIFICATIONS
Media: Air
Generated Pressure Range:
-6 psi (-0.4 bar) to 6 psi (0.4 bar) pressure
Pressure Resolution: 0.01 Pa (0.0001 mbar)
Material:
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection:
Hand-tight connectors for both test gauge and reference gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions:
Height: 5.7'' (145 mm)
Base: 9.65'' (245 mm) x 6.50'' (165 mm)
Weight: 3.5 lb (1.6 kg)
ORDERING INFORMATION
Model Number
ConST 113 — N
ModelPressure port type:N- NPT femaleX- Customize
1 4
,,
Optional Accessories
Model Number
ConST 113-kit
9903
103
Description
Test kit for ConST113 ( hose barb fitting, hose )
Carrying case for ConST113 pump and one gauge
Adapters & Fittings
Portable
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
115 Low Pressure Test Pump
-14 psi to 60 psi
OVERVIEW
The ConST115 Pneumatic Pressure Test Pump is a hand
operated pressure pump designed to generate pressure from
-14psi (-0.95bar) to 60psi (4bar). A high-quality screw press is
designed for fine pressure adjustment, with an adjustment
resolution up to 0.01 Pa (0.0001 mbar). To reach the pressure
as stable as possible during the micro-pressure calibration,
an isothermal bellows chamber is designed to reduce the
possible heat effects caused by environmental temperature
change, and a specially designed shut-off valve makes the
pressure as stable as possible during calibration. A built-in
gas-liquid isolator protects the pump from moisture and dirt to
reducing the need for maintenance. Two hand-t ight
connectors installed on the pump allow easy connecting and
disconnecting to the test pump without the need for PTFE tape
or wrenches. The ConST115 is an ideal comparison test pump
for low pressure application.
FEATURES
Only 6.9 lb
High Resolution
0.01Pa (0.0001 mbar)
High-quality screw press for fine pressure adjustment
Great Stability
·
reduce the influence from environmental temperature changes
·Specially designed bellows minimize leakage to guarantee
excellent stability
·Shut-off valve closes the air in the isothermal chamber during
calibration
Isothermal chamber: the pressure chamber is insulated to
Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from moisture
and dirt
Easy-to-usePressure could be set and adjusted precisely and quickly
through a simple turn of the handle
Hand-tight Connectors
Allows easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches
Portable
APPLICATIONS
The ConST115 Low Pressure Test Pump is designed to
generate pressure from 95% vacuum to 60 psi (4bar) for the
application requiring accurate pressure testing and
calibration. It can be used in calibrating pressure gauges,
transmitters, or other pressure measuring instruments.
SPECIFICATIONS
Media: Air
Generated Pressure Range: -14 psi (-0.95 bar) to 60 psi(4 bar) pressure
Pressure Resolution: 0.01 Pa (0.0001 mbar)
Material:Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection: Hand-tight connectors for both test gauge and reference
gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
DimensionsHeight: 5.51'' (140 mm)
Base: 10.75'' (273 mm) x 10.16'' (258 mm)
Weight: 6.9 lb (3.1 kg)
ConST 115 — N
ModelPressure port type:N- NPT femaleX-Customize
1 4
,,
Optional Accessories
Model Number
ConST 115-kit
9903
103
Description
Carrying case for ConST 115 pump and one gauge
Adapters & Fittings
Test kit for ConST 115 ( hose barb fitting, hose )
ORDERING INFORMATION Model Number
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
116 Handheld Pneumatic Pressure Test Pump
OVERVIEW
The ConST116 Handheld Pneumatic Pressure Test Pump is a
hand operated pressure pump designed to generate
pressure from -14psi (-0.95bar) to 375psi (25bar). A high-
quality screw press is designed for fine pressure adjustment,
with an adjustment resolution up to 10 Pa (0.1 mbar). A
specially designed shut-off valve makes the pressure as
stable as possible during calibration. A built-in gas-liquid
isolator protects the pump from moisture and dirt to reduce
the need for maintenance. Two hand-tight connectors
ins ta l l ed on the pump a l l ow easy connec t ing and
disconnecting to the test pump without the need for PTFE
tape or wrenches. The ConST116 is an ideal comparison test
pump for pressure instruments calibration.
FEATURES
Only 3.3 lb
High Resolution
10 Pa (0.1 mbar)
High-quality screw press for fine pressure adjustment
Great StabilityA specially designed shut-off valve makes the pressure as
stable as possible during calibration
Easy-to-usePressure could be set and adjusted precisely and quickly
through a simple turn of the handle
Hand-tight Connectors
Allows easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches
Portable
Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from moisture
and dirt
APPLICATIONS
The ConST116 Pneumatic Pressure Test Pump is designed
to generate pressure from 95% vacuum to 375 psi (25 bar)
for the application requiring accurate pressure testing and
calibration. It can be used in calibrating pressure gauges,
transmitters, or other pressure measuring instruments.
SPECIFICATIONS
Media: Air
Generated Pressure Range:
-14 psi (-0.95 bar) to 375 psi (25 bar) pressure
Pressure Resolution: 10 Pa (0.1 mbar)
Material:
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection:
Hand-tight connectors for both test gauge and reference gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions:
Height: 5.12'' (130 mm)
Base: 9.45'' (240 mm) x 4.72'' (120 mm)
Weight: 3.31 lb (1.5 kg)
ORDERING INFORMATION
Model Number
ConST 116 — N
ModelPressure port type:N- NPT femaleX-Customize
1 4
,,
Optional Accessories
Model Number
9901
103
Description
Carrying case for ConST116 pump and one gauge
Adapters & Fittings
-14 psi to 375 psi
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
117 Portable Pneumatic Pressure Test Pump
OVERVIEW
The ConST117 Portable Pneumatic Pressure Test Pump is a
hand operated pressure pump designed to generate pressure
from -14psi (-0.95bar) to 600psi (40bar). A high-quality screw
press is designed for fine pressure adjustment, with an
adjustment resolution up to 10 Pa (0.1 mbar). A specially
designed shut-off valve makes the pressure as stable as
possible during calibration. A built-in gas-liquid isolator
protects the pump from moisture and dirt to reduce the need
for maintenance. Two hand-tight connectors installed on the
pump allow easy connecting and disconnecting to the test
pump without the need for PTFE tape or wrenches. The
ConST117 is an ideal comparison test pump for pressure
instruments calibration.
FEATURES
Only 6.6 lb
High Resolution
10 Pa (0.1 mbar)
High-quality screw press for fine pressure adjustment
Great Stability
A specially designed shut-off valve makes the pressure as
stable as possible during calibration
Easy-to-usePressure could be set and adjusted precisely and quickly
through a simple turn of the handle
Hand-tight Connectors
Allows connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches
Portable
Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from moisture
and dirt
APPLICATIONS
The ConST117 is designed to generate pressure from 95%
vacuum to 600psi (40bar) for the applications requiring
accurate pressure testing and calibration. It can be used in
calibrating large size pressure gauges, transmitters, or
other pressure measuring instruments.
SPECIFICATIONS
Media: Air
Generated Pressure Range:
-14 psi (-0.95 bar) to 600 psi (40 bar) pressure
Pressure Resolution: 10 Pa (0.1 mbar)
Material:
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection:
Hand-tight connectors for both test gauge and reference gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions:
Height: 5.5'' (140 mm)
Base: 12.4'' (315 mm) x 7.8'' (198 mm)
Weight: 6.0 lb (2.7 kg)
ORDERING INFORMATION
Model Number
ConST 117 — N
ModelPressure port type:N- NPT femaleX-Customize
1 4
,,
-14 psi to 600 psi
Optional Accessories
Model Number
9904
103
Description
Carrying case for ConST117 pump and one gauge
Adapters & Fittings.
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
162 Pneumatic High Pressure Test Pump
OVERVIEW
The ConST162 Pneumatic High Pressure Test Pump is a hand
operated pressure pump designed to generate pressure from
-14psi (-0.95bar) to 2000psi (140bar). With a long lever, it just
takes 30 seconds to reach 2000 psi (140 bar). A high-quality
screw press is designed for fine pressure adjustment, with an
adjustment resolution up to 10 Pa (0.1 mbar). A specially
designed shut-off valve makes the pressure as stable as
possible during calibration. A built-in gas-liquid isolator
protects the pump from moisture and dirt to reduce the need
for maintenance. The residual liquid in the pump introduced
from devices under test will be pushed out and collected
during pressure release. Two hand-tight connectors installed
on the pump allow easy connecting and disconnecting to the
test pump without the need for PTFE tape or wrenches. The
ConST162 is an ideal comparison test pump for pressure
instruments calibration.
FEATURES
Generate 2000 psi (140 bar) in 30 seconds
High Resolution
Great Stability
Hand-tight Connectors
Allows easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches.
High Efficiency
APPLICATIONS
The ConST162 is designed to generate pressure from 95%
vacuum to 2000 psi (140 bar) for the high pressure
application requiring accurate pressure testing and
calibration. It can be used in calibrating high pressure
gauges, transmitters, or other pressure measuring
instruments.
SPECIFICATIONS
Media: Air
Generated Pressure Range
-14 psi (-0.95 bar) to 2000 psi (140 bar) pressure
Pressure Resolution: 10 Pa (0.1 mbar)
Material
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection
Hand-tight connectors for both test gauge and reference gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions
Height: 7.00'' (178 mm)
Base: 21.26' (540 mm) x 10.63'' (270 mm)
Weight: 16.4 lb (7.4 kg)
ORDERING INFORMATION
Model Number
ConST162 — N
ModelPressure port type:N- NPT femaleX-Customize
1 4
,,
-14 psi to 2,000 psi
Optional Accessories
Model Number
9909
103
Description
Carrying case for ConST162 pump and one gauge
Adapters & Fittings
A specially designed shut-off valve makes the pressure as stable as
possible during calibration.
Durable and Minimal Maintenance
Built-in gas-liquid isolator protects the pump from moisture
and dirt. The residual liquid in the pump introduced from
devices under test will be pushed out and collected during
pressure release.
10 Pa (0.1 mbar)
High-quality screw press for fine pressure adjustment
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
131 Handheld Hydraulic Pressure Test Pump
OVERVIEW
The ConST131 Hydraulic Pressure Test Pump is a hand
operated pressure pump designed to generate pressure from
-12.5psi (-0.85bar) to 6000psi (400bar). With the patented
screw press technology, the high pressure can be easily
generated, increased and decreased smoothly. Without non-
returning valve that is usually used on troublesome hand
pumps, the ConST131 requires minimal maintenance. Two
hand-tight connectors installed on the pump allow easy
connecting and disconnecting to the test pump without the
need for PTFE tape or wrenches. The ConST131 is an ideal
comparison test pump for calibrating pressure measuring
instruments such as test gauges, indicators or transducers in
the field or laboratory.
FEATURES
Only 3.8 lb(1.7kg)
Durable and Minimal Maintenance
Easy-to-use
Extremely Low LeakagePatented screw press technology, instead of leaking,
troublesome, non-returning hand pumps.
Hand-tight Connectors
Allows easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches.
Portable
APPLICATIONS
The ConST131 Hydraulic Pressure Test Pump is designed
to generate pressure from 85% vacuum to 6000 psi (400
bar) for the application requiring accurate pressure testing
and calibration. It can be used in calibrating pressure
gauges, transmitters, or other pressure measuring
instruments.
SPECIFICATIONS
Media: Oil or deionized water
Generated Pressure Range:
-12.5 psi (-0.85 bar) to 6000 psi (400 bar) pressure
Material:
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection:
Hand-tight connectors for both test gauge and reference
gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions:
Height: 4.72'' (120 mm)
Base: 9.84'' (250 mm) x 5.51'' (140 mm)
Weight: 3.8 lb (1.7 kg)
ORDERING INFORMATION
Model Number
ConST131 — N
ModelPressure port type:N- NPT femaleX- Customize
1 4
,,
-12.5 psi to 6000 psi
Optional Accessories
Model Number
9901
103
Description
Carrying case for ConST131 pump and one gauge
Adapters & Fittings
Patented screw press technology, without non-returning valve
inside that is usually used on troublesome hand pumps.
The high pressure can be generated easily, increased and
decreased smoothly.
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
132 Portable Hydraulic Pressure Test Pump
OVERVIEW
The ConST132 Portable Hydraulic Pressure Test Pump is a
hand operated pressure pump designed to generate pressure
from -12.5psi (-0.85bar) to 10,000psi (700bar). With the
patented screw press technology, high pressures can be
easily generated, increased and decreased smoothly.
Without non-returning valve that is usual ly used on
troublesome hand pumps, the ConST132 requires minimal
maintenance. Two hand-tight connectors installed on the
pump allow easy connecting and disconnecting to the test
pump without the need for PTFE tape or wrenches. The
ConST132 is an ideal comparison test pump for calibrating
pressure measuring instruments such as test gauges,
indicators or transducers in the field or laboratory.
FEATURES
Only 7.1 lb(3.2kg)
Durable and Minimal Maintenance
Easy-to-use
Hand-tight Connectors
Allows easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches
Portable
APPLICATIONS
The ConST132 is designed to generate pressure from 85%
vacuum to 10,000psi (700 bar) for the application requiring
accurate pressure testing and calibration. It can be used in
cal ibrat ing pressure gauges, transmitters, or other
pressure measuring instruments.
SPECIFICATIONS
Media:
Oil or deionized water
Generated Pressure Range:
-12.5 psi (-0.85 bar) to 10,000 psi (700 bar) pressure
Material:
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection
Hand-tight connectors for both test gauge and reference gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions
Height: 5.31'' (135 mm)
Base: 11.42'' (290 mm) x 7.80'' (198 mm)
Weight:7.1 lb (3.2 kg)
ORDERING INFORMATION
Model Number
ConST132 — N
ModelPressure port type:N- NPT femaleX-Customize
1 4
,,
-12.5 psi to 10,000 psi
Optional Accessories
Model Number
9905
103
Description
Carrying case for ConST132 pump and one gauge
Adapters & Fittings
Patented screw press technology, without non-returning valve
inside that is usually used on troublesome hand pumps
The high pressure can be generated easily, increased and
decreased smoothly
Extremely low leakage
Patented screw press technology, instead of leaking,
troublesome, non-returning hand pumps.
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
181A Hydraulic High Pressure Calibration Pump
OVERVIEW
The ConST181A Hydraulic High Pressure Test Pump is a hand
operated pressure pump designed to generate pressure from
-12.5psi (-0.85bar) to 15,000 psi (1000bar). With the patented
screw press technology, high pressures can be easily
generated, increased and decreased smoothly. A specially
designed shut-off valve makes the pressure as stable as
possible during calibration. Without non-returning valve that
is usually used on troublesome hand pump, the ConST181A
requires minimal maintenance. Two hand-tight connectors
ins ta l led on the pump a l low easy connec t ing and
disconnecting to the test pump without the need for PTFE
tape or wrenches. The ConST181A is an ideal comparison
test pump for calibrating pressure measuring instruments
such as test gauges, indicators or transducers in the
laboratory.
FEATURES
Generates pressure up to 15,000 psi (1000 bar)
Good for Calibrating Large Chamber Pressure Gauges
Durable and Minimal Maintenance
Hand-tight Connectors
Allows easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches.
APPLICATIONS
The ConST181A is designed to generate pressure from
85% vacuum to 15,000 psi (1000 bar) for the application
requiring accurate pressure testing and calibration. It can
be used in calibrating pressure gauges, transmitters, or
other pressure measuring instruments.
SPECIFICATIONS
Media: Oil
Generated Pressure Range
-12.5 psi (-0.85 bar) to 15,000 psi (1000 bar) pressure
Material
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection
Hand-tight connectors for both test gauge and reference gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions
Height: 9.1'' (230 mm)
Base: 20.5'' (520 mm) x 14.2'' (360 mm)
Weight: 35.5 lb (16 kg)
ORDERING INFORMATION
Model Number
ConST181A — N
ModelPressure port type:N- NPT femaleX-Customize
1 4,,
Optional Accessories
Model Number
9908
103
Description
Carrying case for ConST181A,ConST182A or
ConST186 pump and one gauge
Adapters & Fittings
With specially designed shut-off valve, high pressure could be
reached through repeat pumping.
Patented screw press technology, without non-returning valve
inside that is usually used on troublesome hand pumps.
Extremely low leakage
Patented screw press technology, instead of leaking,
troublesome, non-returning hand pumps.
High Efficiency
Easy-to-use
High pressures can be generated easily, increased and
decreased smoothly
-12.5 psi to 15,000 psi
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
182A Hydraulic Pressure Calibration Pump (oil-free)
OVERVIEW
The ConST182A Hydraulic High Pressure Test Pump is
specially designed for calibrating oil-free pressure measuring
instruments in the range of -12.5psi (-0.85bar) to 15,000psi
(1000 bar). All parts used in the pump have been carefully
cleaned to remove oil. The pump uses water as the media. With
the patented screw press technology, high pressures can be
easily generated.
Increased and decreased smoothly. A specially designed
shut-off valve makes the pressure as stable as possible during
calibration. Without the non-returning valve that is used on
troublesome hand pumps, the ConST182A requires minimal
maintenance. Two hand-tight connectors installed on the pump
allow easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches. The ConST182A
is an ideal comparison test pump for calibrating oil-free
pressure measuring instruments such as test gauges,
indicators or transducers in the laboratory.
FEATURES
Generates pressure up to 15,000 psi (1000 bar)
Durable and Minimal Maintenance
Hand-tight Connectors
Allows easy connecting and disconnecting to the test pump
without the need for PTFE tape or wrenches.
APPLICATIONS
The ConST182A is specially designed for calibrating oil-
free pressure measuring instrument in the range from 85%
vacuum to 15,000 psi (1000 bar). It can be used in
calibrating oil-free pressure gauges, transmitters, or other
p r e s s u r e m e a s u r i n g i n s t r u m e n t s i n a e r o s p a c e ,
pharmaceutical, or food industries.
SPECIFICATIONS
Media:
Generated Pressure Range
-12.5 psi (-0.85bar) to 15,000 psi (1000 bar) pressure
Material
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection
Hand-tight connectors for both test gauge and reference gauge
Test Gauge Connection: 1/4" NPT female
Reference Gauge Connection: 1/4" NPT female
Dimensions
Height: 9.1'' (230 mm)
Base: 20.5'' (520 mm) x 14.2'' (360 mm)
Weight: 35.5 lb (16 kg)
Deionized water
ORDERING INFORMATION
Model Number
ConST182A — N
ModelPressure port type:N- NPT femaleX-Customize
1 4,,
Optional Accessories
Model Number
9908
103
Description
Carrying case for ConST181A, ConST182A or
ConST 186 pump and one gauge
Adapters & Fittings
Patented screw press technology, without non-returning valve
inside that is usually used on troublesome hand pumps.
Extremely low leakage
Patented screw press technology, instead of leaking,
troublesome, non-returning hand pump.
High Efficiency
Easy-to-use
With the patented screw press technology, high pressures can
be generated easily, increased and decreased smoothly
-12.5 psi to 15,000 psi
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012
186 Hydraulic Ultra-High Pressure Calibration Pump
OVERVIEW
The ConST186 Hydraulic Ultra-high Pressure Pump is a hand
operated pressure pump designed to generate pressure up to
37,500 psi (2500 bar). With the patented screw press
technology, high pressures can be easily generated, increased
and decreased smoothly. A specially designed shut-off valve
makes the pressure as stable as possible during calibration.
Without non-returning valve that is usual ly used on
troublesome hand pump, the ConST186 requires minimal
maintenance. The ConST186 is an ideal comparison test pump
for calibrating ultra-high pressure measuring instruments such
as test gauges, indicators or transducers in the laboratory.
FEATURES
Generate pressure up to 37,500 psi (2500 bar)
Durable and Minimal Maintenance
APPLICATIONS
The ConST186 is a hand operated pressure pump
designed to generate pressure up to 37,500 psi (2500 bar).
With the patented screw press technology, high pressure
can be easily generated, increased and decreased
smoothly. A specially designed shut-off valve makes the
pressure as stable as possible during calibration. Without
non-returning valve that is usually used on troublesome
hand pump, ConST186 has minimal maintenance required.
The ConST186 is an ideal comparison test pump for
calibrating ultra-high pressure measuring instruments
against test gauges, indicators or transducers in the
laboratory.
SPECIFICATIONS
Media: Oil
Generated Pressure Range
-12.5 psi (-0.85 bar) to 37,500 psi (2500 bar) pressure
Material
Ram/adapters: SST
Body: SST/aluminum
Seals: Buna-N
Connection
Test Gauge connection:
Positional Autoclave F-250-C, 9/16"-18 UNF female
Reference Gauge Connection:
Positional Autoclave F-250-C, 9/16"-18 UNF female
Two adapters are provided per request
Dimensions
Height: 9.1'' (230 mm)
Base: 20.5'' (520 mm) x 14.2'' (360 mm)
Weight: 35.5 lb (16 kg)
ORDERING INFORMATION
Model Number
Optional Accessories
Model Number
9908
103
Description
Carrying case for ConST 181A,ConST182A or
ConST 186 pump and one gauge
Adapters & Fittings
Patented screw press technology, without non-returning valve
inside that is usually used on troublesome hand pumps.
Extremely low leakage
Patented screw press technology, instead of leaking,
troublesome, non-returning hand pumps.
Generate Ultra-high Pressure
Easy-to-use
With the patented screw press technology, the high pressures
can be generated easily, increased and decreased smoothly.
ConST186 — N
ModelPressure port type:N- NPT femaleAF - Autoclave F-250-C femaleX-Customize
1 2,,
-12.5 psi to 37,500 psi
E Instruments
www.eigroup.bizBulletin CAL CONST PUMP - ed. 04-2012