High pressure pump

Supplier and manufacturer in IndiaBDS Engineering

Two Types of High Pressure Pump

• Vertical Multistage Pump:1.CDL series pump2.GDL series pump

• Horizontal multistage pump1.CHDF series pump2.CHL series pump

Vertical Multistage Pump

Series : Vertical multistage pumpName : CDL series pump

Vertical Multistage Pump In India

CDL series pump: CDL/CDLF pump series are vertical designed

especially for high pressure, which is driven by a standard electric motor along with all parts touch with liquid are of stainless steel. Electric Motor comprise of TEFC motor, IEC standard, IP55, Class F, Aluminum housing and quadrate appearance, Motor bearing: NSK, 50HZ or 60HZ, 3-phase or Single phase

• The motor output shaft directly connects with the pump shaft through a coupling. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.

CDL series pump

• Applications:

Urban water supply and pressure boosting Applicable to conveying noncorrosive liquidIndustrial circulating system and processing

systemCDLF is suitable for slightly corrosive liquid

Water supply for boiler, condensing systemFire fighting systemWater treatment and RO systemCooling water system

Operation Conditions of Pump

Clean, non-flammable and non-explosive liquid containing no solid granules and fibers.

Liquid temperature:Normal temperature type:-15 +70Hot water type:+70 +120Ambient temperature: up to+40Altitude: up to 1000m 

GDL Multistage Pump

Series :Vertical multistage pumpName : GDL series pump

GDL series pump

• GDL Vertical Multistage pump adopt cast iron or stainless steel, all pump parts are casting. These kind of vertical multistage pump, have the advantage of energy-saving, small volume, stable performance, etc .The impeller can be cast iron, brass or stainless steel.

Dealer of Multistage pump India

• With hydraulic balance solve axial force, consequently pump runs smoothly. Shaft and sleeve are of hard quality alloy and adopt wear resistant mechanical seal.

• Electric motor:TEFC, two-pole standard motor, IP54, Class FCast iron motor, bearing: NSK·50HZ or 60HZ, 3-Phase

Typical applications:

Urban water supply and pressure boostingOffice buildings and high-rise buildings,

industrialIndustrial circulating system and processing

systemWater supply for boiler, condensing system Chemical process make-up water

Water treatment and infiltration systemAgricultural irrigation, Cooling water systemProduct FeaturesInstallation, maintenance convenient: Pipeline

installation, inlet and outlet could be like valve installed in the pipeline as any location and any direction

Pressure Pump

Less operation, Low cost, easy to maintain, Stainless steel casting, light weight

Pressure Booster Pump and Tank

• BDS Engineering a leading India based company Manufacturers of Water Pumps, Domestic Water Boosting Pumps suppliers in Delhi, Pressure Booster, Dewatering Pump, Drainage pump, Sump Pump, Water Pump, Pressure Vessels, sellers in India.

Contact us

• 1250Address: 318, Street No.4, Ground Floor, Govind Puri, Kalkaji, (Opp. Kalkaji Bus Depot) New Delhi - 110019

• Customer Care: +91-9311122211• Telefax: 011-26467250• Email: info@bdsblairs.com• Career: hr@bdsblairs.com