1 dolang technology equipment...

www.dolang.cnDolang Technology Equipment Co.,Ltd.

1


本宣传册所列图片、文字及版式归山东栋梁科技设备有限公司版权所有，受版权法保护，侵权必究。

Dolang Technology & Equipment Co., Ltd.

No.18-2 Lashan Road,Jinan,China

Tel:86-531-87586199

Fax:86-531-87560072

Email:[email protected]

Skype:dolang-teaching

MSN: [email protected]

http://www.didactic.cn


Innovative E-skills & Technology Training Series ............... 17-23

MCU Technology Training Series ........................................ 24-26

Machine Tools Electrical Control Training Series(Model-type)27-32

Mechanical Principles and Design Training Series .............. 33-34

CNC Machine Tools Maintenance Training Series(Model-type) 35-40

Building Automatic Training Series...................................... 41-46

PLC Training Series .............................................................. 47-52

Industrial Automatic Control Technology Training Series ..... 53-56

Pneumatics Training Series ................................................... 57-60

Hydraulics Training Series .................................................... 61-64

Sensor Training Series .......................................................... 65-66

Motor Training Series ........................................................... 67-70

Mechatronics Training Series ............................................... 71-86

MPS Training Series ............................................................. 87-94

FMS Training Series ........................................................... 95-100

Automobile Training Series ............................................. 101-104

CatalogueElectrical Maintance Skill Training Series ........................... 09-16


1

Dolang Technology Equipment Co., Ltd. was founded in 1998.

Dolang is a company specialized in didactic training equipment for technical schools,

training schools, engineer schools, engineer training centers and manufacture of high-

tech enterprises.

Dolang take up 9240 sq. m. Have more than 40 professional engineers and more than

200 skilled workers.

Our products are involved in various education equipment industry fields.

We serve in 80 universities and more than 300 vocational colleges.

With self-operation export & import license, our products have being exported to

German,Canada, France, Russia,Brazil,Colombia, Peru, Mongolia, Tunisia, Mexico,

Indonesia, Iraq,Cyprus, Vietnam, Kazakhstan etc.

We will do our best all the time to be the trend setter in didactic field!

Company Profile

01

Company Logo


3

More Than 30 PatentsStandardized Management of CIS

ISO9001 Certificate ISO14001 Certificate GB/T28001 Certificate

Jinan International Scientific Association Member Modern Mechatronic Integration Professional Skills

Modern CNC Manufacturer Technology Skill Enterprise Practice Bases in Shandong Province

Advanced Enterprice of Respect Teacher Mechatronic Research Center of Jinan

One of Ten Vocational Education Equipment Company Sponsor of Vocational Skills Competition

Enterprise Honor Enterprise Honor

Pilot Enterprises of Intellectual Property Rights SME Technology Innovation Fund Project

03

GB/T28001 CertificateGB/T28001 CertificateGB/T28001 Certificate

Worlddidactic Member


5

Competition Site Competition Site

05

MPS Training Room

Siemens PLC Training Room

Industrial Intergrated Network Training Room

Electro Hydraulic Training Room

Mechatronic Training Room

Industrial Automatic Training Room


7

Worlddidac Exhibition Customer Visit

07

Customers from France

Customers from Canada

Customers from Kazakhstan

Customers from France

Customers from RomaniaCustomers from Tunisia

Lab 2011, in Dubai

GESS 2012, in Dubai


9

Electrical Maintenance Skill Training SeriesCustomer Training

■ Technical Parameter● Dimension of the workbench:1600×1370×1800mm

● Dimension of patch board:640×730 mm (Stainless)

● Input power:Three phase AC 380V ±10% 50Hz/60Hz

● Output power:AC 380V safety terminal output

AC 220V safety socket output

DC 1.25~30V safety terminal output

(Including voltage & current indicate)

● Capacity: ＜ 1.5kVA

■ DLWD-ETBE24D730M Electrical Maintance Skill Training System

09

Our Engineer Training in Vietnam Customers fromTunisia

Customers from Brunei

Customer from Pakistan

Customers from Brunei

Customers from Saudi Arabia


11

■ Technical Parameter● Dimension of the workbench:1600×800×1680mm● Dimension of patch board:640×730 mm (Stainless)● Input power:Three phase AC 380V ±10% 50Hz /60Hz ● Output power:AC 380V safety terminal output AC 220V safety socket output DC 1.25~30V safety terminal output(Including voltage and current indicate)● Capacity ＜ 1.5kVA

Electrical Maintenance Skill Training Series

■ DLWD-ETBE12D730 Electrical Maintance Skill Training System

Patent NO.: ZL2003 3 0109800.X


■ DLWD-ETBE12DSTA Electrical Maintance Skill Training System

■ DLWD-ETBE12D730M Electrical Maintenance Skill Training System

■ Overview● This device which is produced under DIN standard is close to industrial site.● Blue industrial column structure, one-side for two students.With two independent power supply. Protection against short-circuit,overcurrent and leakage.

■ Overview● Blue industrial column structure, one-side for two students.With two independent power supply.● Protection against short-circuit,overcurrent and leakage.

■ Technical Parameter● Dimension of the workbench:1600×800×1680mm● Dimension of patch board:640×730 mm (Stainless)● Input power:Three phase AC 380V ±10% 50Hz/60Hz ● Output power:AC 380V safety terminal output AC 220V safety socket output DC 1.25~30V safety terminal output (Including voltage & current indicate)● Capacity: ＜ 1.5kVA

■ Overview ● The device add instruments measurement on basis of DLWD-ETBE12D730"● Equipped meters: AC Voltmeter,AC Ampermeter,Frequency meter,Power Factor meter,Three-phase active power meter,Single-phase active power meter and single-phase kilowatt hour meter

■ Patch BoardPatent: ZL2003 3 0109796.7


13

Electrical Maintenance Skill Training Series Electrical Maintenance Skill Training Series

■ DLDS-1214A Electrical Assemble Training System

■ Overview● The device is widely used in electrical training major of all vocational school, technical school,college● The device is a workbench developed according to electrical installtion of factory and room. ● Double layers structure, inner is simulation metope,outer is patch borad metope

■ Technical Parameter● Total Dimension:2400×1200×2440mm

● Dimension of operating panel:1600×700×750mm

● Input power:Three-phase, five-wire: AC 380V ±10% 50Hz/60Hz

● Capacity ＜ 2.0kVA

Patent NO.:ZL2003 3 0109802.9■ DLWD-ETBE840M-PX Teacher Workbench

■ Overview● The workbench is composed of control plateform and teacher workbench. The height of the workbench is 750mm, width is 800mm.With patch board electrical control box.● Equipped with regular meters.

■ Technical Parameter● Total dimension:2000×800×1807mm● Size of patch board:840×640mm (Stainless)● Input power: Three-phase, five-wire AC 380V ±10% 50Hz/60Hz ● Output power:AC 380V safety terminal output AC 220V safety socket output DC 1.25~30V safety terminal output(Including voltage and current indicate)● Capacity ＜ 1.5kVA


15

■ DLWD-DGJS13 Electrotechnics, Electric and Electrical Drive Training Set

■ Overview● This device can provide the AC power, low voltage DC power, adjustable constant current source, controlled source, each experimental hang box and motor as the experiment needed.● Finish the superposition principle of "electrician foundation", "electrotechnics" Thevenin, two-port network, resonance , frequency selective and one, two order circuit experiment.● Complete the single-phase and three-phase, fluorescent lamp and the meter experiments of “the circuit analysis ", "electrotechnics".● Complete regular "digital circuit"," analogue circuit" experiments.● Complete experiments of “motor control” “relay contact control” and electric drive”

■ Technical Parameter● Total dimension:1660×800×1840mm● Input power: Three-phase, five-wire AC 380V ±10% 50Hz/60Hz ● Output power:AC 0~450V, AC 0~220V safety terminal output AC 220V safety socket output DC 1.25~30V safety terminal output● Capacity ＜ 1.5kVA

■ DLWD-ETBE12D-II Advanced Electrotechnics Manitance Skill Training&Assessment System

■ Overview ● This device uses hanging box-type structure. The hanging box panel is equipped with AC contactor, time relay, button, switch, thermal relay, PLC and other experimental components.

■ Technical Parameter● Total dimension:1600×800×1800mm● Input power: Three-phase, five-wire AC 380V ±10% 50Hz/60Hz ● Output power:AC 380V, AC 0~220V safety terminal output AC 220V safety socket output DC 1.25~30V power safety terminal output● Capacity ＜ 1.5kVA

Electrical Maintenance Skill Training Series Electrical Maintenance Skill Training Series

Electrotechnics experiments set DLWD-DGJS11 and Electrotechnics, Electric training set DLWD-DGJS12 are available Intermediate Electrotechnics Manitance Skill Training&Assessment System DLWD-ETBE12D-I is available


17


■ Overview● The set is modular structure which composed of 22 independent modular. Including power box, body resistance modular, body electric shock modular, step voltage modular, safety ground modular, direct electric shock modular, indirect electric shock modular. This set include various protective measures such as leakage protection modular, short-circuit protection modular and insulator monitor modular.

■ 主要实训项目

● 人体电阻

● 直流电流对人体的危害

● 频率超过 50Hz 的交流电流对人体的危害

● 电气设备的操作和运行

● 电气事故急求介绍

● 供电网络

● 基本保护措施 I

● 基本保护措施 II

● 直接触电

● 间接触电

● 导体的规格

● 触电保护

■ DLWD-SA2668B Safety Using Electricity Training Set Patent NO.:ZL2009 2 0315594.X

■ Technical Parameter● Total dimension:1600×800×1680mm

● Input power: Three-phase, five-wire AC 220V ±10% 50Hz/60Hz

● Output power: IT network, TT network,TN-S network, TN-C network, TN-C-S network

Independent AC 0~220V safety terminal output

AC 220V isolated output

AC 24V isolated output

● Capacity ＜ 1.0kVA ■ DLDZ-165E Advanced Electronic Technology Training Evaluation Device

■ Overview● The equipment is researched according to "Analogue electric technology"& "Digital electrical technology"● The equipment is composed of workbench,power box,analogue circuit module, digital circuit module,gate-circuit module,trigger circuit module, digital logic circuit module, impulse circuit module and components box. Protection: protection against short circuit, protection against leakage, protection against grounded, protection against emergency off.

■ Technical Parameter● Total dimension:1400×700×1655mm● Input power: Three-phase, five-wire AC 220V ±10% 50Hz/60Hz ● Output power:AC 220V safety socket output DC 1.25~30V multi power safety terminal output ● Capacity ＜ 1.0kVA

E-skills & Technology Training Series


19

E-skills & Technology Training Series E-skills & Technology Training Series

■ Overview● This is a workbench to provide AC power output to electronic assemble skill training and assessment● The workbench devides three operation area:test and maintenance,assemble and welding, PCB processing● The set equipped with PCB kits,board cutter,plate setter,corrosion chamber,bench drill and copper clad

■ DLDZ-ZJG03 Electronics Installation Training System

■ Technical Parameter● Total dimension:3468×800×1764mm● Input power: Three-phase, five-wire AC 220V ±10% 50Hz/60Hz ● Output power:AC 220V safety socket output● Capacity ＜ 1.5KVA

■ DLDZ-ETTE24D E-skills and the PCB Production Process Training System

■ DLDZ-DLDZ01 Power Electronic Technology and Automation Control Training System

■ Overview● The system equipped with AC/DC power supply, Instruments, industrial AC digital voltmeter/ampere meter, timer and alarm recorder.● The system also equipped with thyristor main circuit, adjustable three-phase resistance, three-phase thyristor trigger circuit, thyristor trigger circuit experiment,motor speed control experiment,DC chopper circuit, given experimental device,new device features experimental, adjustable resistor, capacitor box,single-phase voltage regulator with adjustable load,transformer experiment, power device drive circuit experiment box ,single phase alternating rectangular frequency conversion principle,DC chopper experiment,chopping AC voltage regulator circuit, single-phase voltage regulator circuit,lift and composite chopper circuit.

■ Technical Parameter● Total dimension:1870×720×1620mm● Input power: Three-phase, five-wire AC 380V ±10% 50Hz/60Hz ● Output power:AC 380V, 127V ,63.6V ,31.8V safety socket output; AC220V safety socket output, DC220V safety terminal output● Capacity ＜2.0 KVA


21


■DLPCB-DKJ1033 PCB Laser Engrave Machine

■DLPCB-TZ1 Bench Drilling Machine

■ DLPCB-1000 PCB Processing System


■ DLPCB-UV300 Both-side Exposure Machine

■ DLPCB-TP300 Direct Galvanized Hole Metalized Equipment

■ Technical ParameterUsed for exposure of one or double sides circuit board which covered by sensitive film. It is suitable for photochemistry transfer processing of PCB, name board and hollow out● Dimensions (length / width / height): 620 × 240 × 650mm● Power supply: 220VAC,50Hz/60Hz● Power: 0.2kW● Minimum analytical line width: 3mil● Maximum exposure format: 300mm × 400mm● Light source: imported UV-A band UV lamp● Wave length: 365nm● Capacity: 120PNL / H● Vacuum pressure: ≤ 0.6MPa● Translucent materials: Industrial translucent membrane● Equipment built-in micro-controller can be programmed● The device is equipped with a LCD interface, beep alarm● Weight: 15kg

■ Technical ParameterUsed for carbon-film technique metalized technic in PCB processing.It fulfill PCB realiable breakover by unoil,water scrubbing,black hole,dry and copper plating● Dimensions (length / width / height): 1056mm × 628mm × 516mm● Power supply: 220VAC/50Hz● Total power: 0.8 KW● Max size of handle board: 230mm x 305mm● Min aperture: 0.2mm (8mil)● Five slot design, including degreasing, multifunction, black hole, plating, OSP tank;● Multifunction slot depending on requirements, can be quickly converted to washing slot or microetch slot;● Swing function with air mixing, circulation and filtering functions;● Adjustable speed swing motor, adjustable swing speed to adapt to different thickness aperture ratio;● With OSP treatment tank, organic oxidation flux membrane coating of bare copper class PCB;● Activation of drug solution types: carbon black colloidal

■ DLDZ-SD301 Portable Digital Circuit Training Set ■ DLDZ-MD801 Portable Analogue Circuit Training Set

■ Technical Parameter● Total dimension:460×360×110mm● Input power: Three-phase, five-wire AC 220V ±10% 50Hz/60Hz ● Output power: DC ±5V continuous adjustable,DC ±12V,DC +5V~+27V continuous adjustable DC power● Capacity <200VA

■ OverviewThis equipment is basic training set for digital circuit & impulse circuit

■ OverviewThis equipment is basic training set for analogue circuit & electric technology

■ Technical Parameter● Total dimension:460×360×110mm

● Input power: Three-phase, five-wire AC 220V ±10%

50Hz/60Hz

● Output power:DC 5V, DC±5V continuous adjustable,DC

±12V,DC +5V~+27V continuous adjustable DC power

● Capacity ＜ 200VA


23

■ DLDS-WXD12 Radio Debugging Work Skill Training Examination Identification Equipment

(without instrument)

■ Overview● The equipment provide reliable and effective AC/DC power supply, and use the modularization form provides the infrared integration receiving module, the infrared single tube emission and receiving module, the radio operation module, TV operation module, intercom operation module

■ Technical Parameter● Dimension:1800×708×1780mm

● Input voltage: single-phase three wire 220 V± 10% 50 Hz/60Hz

● Output power: AC220 V, Fixed dc power supply: 5 DCV, ± 12 DCV, 35 V

● Capacity: ＜ 1KVA

Innovative E-skills & Technology Training Series

■ DLPCB-DM300 Circuit Board Engraving Machine

■ Technical Parameter Fit for small-lot,quick make circuit board in lab.The equipment can drill,diagram circuit milling,Graphic profile through milling,make blind hole, blind slot and so on.● The finest processing conductor width / spacing: 0.1mm (4mil)● Processing minimum hole diameter: 0.2mm (8mil)● Processing format 305mm x 230mm● Using the German high-speed electric spindle with speed 60000rpm● Repeat positioning accuracy ≤ ± 5μm● System positioning accuracy ≤ ± 20μm● Contour through the milling speed: 6mm / s● 20 tool change bit electronically controlled fully automatic tool change● Self-developed patent protection the auto tune knife deep technical● X, Y, Z axis imported high-precision the mixed linear stepper motor drive● With vertical hood● With industrial vacuum systems● Equipped with a high resolution camera and a diffuse light source● Equipped with a control computer and monitor.

■ DLPCB-DM3000B Circuit Board Seal Machine (rapid PCB)

■ Technical ParameterFit for small-lot,quick make circuit board in lab.The equipment can drill,diagram circuit milling,Graphic profile through milling,make blind hole, blind slot and so on● Processing breadth 305mm x 230mm ● Coaxial depth limit function● Air cooling high speed electric spindle. The speed is 40000rpm ● Independent research and developed protected quick toolchanger● Independent research and developed protected precision toolsetting adjust depth system● Complete aluminium casting workbench● Straight step motor drive on X,Y Z● Semi-closed structure which easy to operate● Power: 220VAC,50Hz/60Hz

MCU Series


25

■ DLDP-YD510 MCU Training Assessment System

■ OverviewThe device can meet the requirement of "principle and application of MCU","MCU technology" and "Principle and interface technics of MCU". It can simulate real time equipped with MCU simulator

MCU Training Series

■ Technical Parameter● Dimension:1400×700×1655mm● Input power: Single phase, five-wire,AC220V±10% 50Hz/60Hz● Output power: AC: 220 V safety socket output DC 1.25 ～ 30V、DC 5V multi DC power safety terminal output● Capacity: ＜ 1KVA

The following models also available MCU Training Set DLDP-YD511MCU Training Set DLDP-YD512MCU Training Set DLDP-YD513 ■ DLDP-SX1 MCU Training Set

■ DLDP-PDB1 PLC·Frequency Converter·MCU Comprehensive Training System

■ Overview● The system including PLC, frequency converter, MCU and simulator objective. The training content including PLC basic training, PLC comprehensive training, know and operate frequency converter parameter and communication training, MCU connector extend,data collect, data display, keyboard control and timer.

MCU Training Series

■ Technical Parameter● Dimension:2150×700×1600mm● Input power: Single phase, five-wire,AC220V±10% 50Hz/60Hz● Output power: AC220 V safety socket output DC24V、DC 5V multi DC power safety terminal output● Capacity: ＜ 1KVA


27

■ DLDP-YDKZ(51) MCU Experiments and Motion Control Experiment Training System

■ Overview ● The system including research and experiments of mechatronic drive control,

computer control system,mechanical project control and CNC technology

● The system providing sample program of MCU and PC.

MCU Training Series

■ Technical Parameter● Dimension:1000×800×1807mm● Input Power: Single phase, five-wire,AC220V±10% 50Hz/60Hz● Output power: DC18V、DC 5V multi DC power safety terminal output● Capacity: ＜ 1KVA

■ DLDP-DMP Two-Dimensional Motion Platform

MCU experiments and motion control experiments training system DLDP-YDKZ(ARM) is available

Machine Tools Electrical Control Training Series(Model-type)

■ Overview

● The equipment simulate the real gantry planer structure. The gantry planer is controlled by PLC.

■ Technical Parameter● Dimension:1590×700×1710mm● Input Power: Three-phase, five-wire,AC380V±10% 50Hz/60Hz● Capacity: ＜ 2KVA ● Work move stroke:250mm● Boring head move stroke:250mm

■ DLJCS-BA2012 Intelligent Gantry Planer Electrical Skill Training Assessment System


29

■ DLJCS-CA6140 Intelligent Lather Machine Electrical Skill Training Assessment Equipment (Semi-real)


■ DLJCS-X62W Intelligent Milling Machine Electrical Skill Training Assessment Equipment (Semi-real)

■ Technical Parameter● Dimension: 1590×700×1710mm● Input Power: Three- phase, five-wire,AC380V±10% 50Hz/60Hz● Capacity: ＜ 1KVA

■ DLJCS-M7120 Intelligent Surface Grinder Electrical Skill Training Assessment Equipment (Semi-real)


■ DLJCS-Z3040B Intelligent Radial Drilling Electrical Skill Training Assessment Equipment (Semi-real)


● Dimension of lather machine:900×320×370mm ● Longitudinal stroke of the workbench:130mm● Verticle stroke of the workbench:30mm● Crosswise stroke of the workbench:50mm

■ Technical Parameter● Dimension:1590×700×1710 mm ● Input Power: Three- phase, five-wire,AC380V±10% 50Hz/60Hz● Capacity: ＜ 1KVA

● Dimension of surface grinder M7120:800×400×200mm● Workbench move stroke: 400mm● Wheel rack lift stroke: 100mm

■ Technical Parameter● Dimension:1590×700×1710 mm ● Input power: Three- phase, five-wire,AC380V±10% 50Hz/60Hz● Capacity: ＜ 1KVA

● Dimension of radial drilling :600×320×500mm● Lift stroke: 1600mm● Main spindle box stroke:250mm

● Dimension of lather machine:900×320×370mm ● Stroke of the workbench:200mm● Spindle speed:250r/min


31

Machine Tools Electrical Control Training Series(Model-type) Machine Tools Electrical Control Training Series(Model-type)

■ DLJCS-20/5t Intelligent Bridge Crane Electrical Skill Training Assessment Equipment (Semi-real)

■ DLJCS-T68 Intelligent Horizontal Boring Machine Electrical Skill Training Assessment Equipment (Semi-real)

■ Technical Parameter● Dimension: 1590×700×1710mm

● Input Power: Three- phase, five-wire,AC380V±10% 50Hz/60Hz● Capacity: ＜ 1KVA

■ DLJCS-M7475B Intelligent Surface Grinder Electrical Skill Training Assessment Equipment (Semi-real)

■ DLJCS-M1432A Intelligent Universal Grinding Machine External Electrical Skill Training Assessment Set (Semi-real)


● Dimension of boring machine:1180×500×800mm● Workbench stroke:250mm● Boring machine shelf move stroke:250mm

■ Technical Parameter● Dimension:1590×700×1710 mm

● Input Power: Three- phase, five-wire,AC380V±10% 50Hz/60Hz


● Dimension of surface grinder M7475B:800×300×940mm● Longitudinal stroke of the workbench: 400mm● Speed of grinding wheel: 100r/min● Speed of round workbench:15r/min or 30r/min

■ Technical Parameter● Dimension:1590×700×1710 mm

● Input Power: Three- phase, five-wire,AC380V±10% 50Hz/60Hz


● Dimension of surface grinder M1432A:800×480×350mm● Stroke of the workbench: 150mm

● Dimension of 20/5t crane:1000×600×800mm● Big car stroke:500mm● Small car stroke:300mm


33


■ DLJCS-G4 Intelligent Four-in-One Machine Electrical Skill Training Assessment Equipment (Semi-real)

■ Overview● The system use standard distribution cabinet which has machine training unit at each side.The system can set all kinds of electrical circuit fault and maintenance● The electrical part of this system can fulfill kinds of motion control. Including: universal miller X62W, engine lather CA6140, radial drill machine Z3040B, surface grinding machine M7120● All the electrical control components are industrial components

■ Technical Parameter● Dimension of cabinet :1010×600×1870mm (Single cabinet) ● Dimension of the machines: Milling machine 900×300×370mm Drilling machine 600×320×500mm Grinder machine: 800×400×200mm● Input power:Three-phase, five-wire:AC 380V±10% 50Hz/60Hz● Capacity:＜1KVA

Mechanical Principles and Design Training Series

■ DLQG-ZT501 Mechanical Assembly and Adjustment Technology Comprehensive Training System

■ Overview● The system is designed on basic of fitter basic operation, assembly, measurement and adjustment, quality inspection process● The system consists of various mechanical modules which train independently.

■ Technical Parameter● Dimension:1800mm×700mm×820mm● Input power: single phase three line AC220V ±10% 50Hz/60Hz● Capacity: ＜ 1KVA

● Weight:600kg


35

■ DLJX-JXXT Mechanical System Comprehensive Training Set

■ Overview● The equipment can fulfill the training of installation,application,maintenance and troubleshooting of mechanical drive components.● Desktop structure, all industrial components and modular design.● Main modules: Pulang Ni brake module, multi motor module,couplings modules, seat bearing module, belt drive module 1,chain drive module 1, gear drive module 1, belt drive module 2,chain drive module 2, shaft and coupling module, lubrication module, gear drive module 2, bearing module, gaskets and seals module, clutch and brake modules, ball screw and linear bearing module, vibration measurement and balancing module, test and measurement kit.

■ Technical Parameter● Dimension:1845×1075×2000mm● Input power:Three-phase, five-wire AC 380V±10% 50Hz/60Hz● Capacity: ＜ 1KVA

Mechanical Principles and Design Training Series CNC Machine Tools Maintenance Training Series(Model-type)

■ Technical Parameter● Dimension:1460×602×1700mm● Input power:Three-phase, Five-wire AC 380V±10% 50Hz/60Hz● Output power:AC 220V safety socket output● Capacity: ＜ 5.0 KVA

■ Overview● The device is designed for Mechatronic technology and application,Electrical

technology application and CNC debugging & maintance.

● The System is constitute of CNC system,frequency spindle system, electrical control

panel, power control part, servo drive control section and milling simulate model

● Fulfill CNC system installation and debugging, parameter setting, PLC programming,

fault analysis and maintance,CNC lathe assembly debugging and CNC programming and

process operation

■ DLSKB-C980TD01 Intelligent CNC Lather Machine Comprehensive Training System(Semi-real)


37

■ Overview● The device is designed for Mechatronic technology and application,Electrical technology application and CNC debugging & maintance.● The system is "SINUMERIK 802C base line".● The System is constitute of CNC system,frequency spindle system, electrical control panel, power control part, servo drive control section and milling simulate model● Fulfill CNC system installation and debugging, parameter setting, PLC programming, fault analysis and maintance,CNC lather assembly debugging and CNC programming and process operation

■ Technical Parameter● Dimension:1460×602×1700mm● Input power:Three-phase, Five-wire AC 380V±10% 50Hz/60Hz● Output power:AC 220V safety socket output● Capacity: ＜ 2.0 KVA● Parameter for lather machine: Workbench move stroke:X direction :200mm Z direction:250mm Max move speed of workebnch:3000mm/min Max speed of spindle:1400r/min 25W Dimension of lather machine:670×450×180mm

■ DLSKB-C802C1 CNC Lathe Machine Comprehensive Training System (Semi-real)

CNC Machine Tools Maintenance Training Series(Model-type) CNC Machine Tools Maintenance Training Series(Model-type)

■ Technical Parameter● Dimension:1460×602×1700mm● Input power:Three-phase, five-wire AC 380V±10% 50Hz/60Hz● Output power: AC220V safety socket output● Capacity: ＜ 5.0 KVA● Parameter for milling machine: Workbench move stroke:X direction :120mm, Y direction :120mm, Z Direction:150mm Max move speed of workebnch:3000mm/min Max speed of spindle:1400r/min 25W, Dimension of lather machine:670×450×180mm

■ DLSKL-Xmate2 CNC Milling Machine Comprehensive Training Set (Semi-real)

■ Overview● The device is designed for Mechatronic technology and application,Electrical technology application and CNC debugging & maintance.● The system is "FANUC 0i mate MD".● The System is constitute of CNC system,frequency spindle system, electrical control panel, power control part, servo drive control section and milling simulate model● Fulfill CNC system installation and debugging, parameter setting, PLC programming, fault analysis and maintenance,CNC lather assembly debugging and CNC programming and process operation


39

■ DLSKN-X802D031 Intelligent CNC Milling Machine Comprehensive Training Set (Semi-real)

CNC Machine Tools Maintenance Training Series(Model-type)

■ Overview● The device is designed for Mechatronic technology and application,Electrical technology application and CNC debugging & maintance.● The system is "SINUMERIK 802C base line".● The System is constitute of CNC system,frequency spindle system, electrical control panel, power control part, servo drive control section and milling simulate model● Fulfill CNC system installation and debugging, parameter setting, PLC programming, fault analysis and maintance,CNC lather assembly debugging and CNC programming and process operation

■ Technical Parameter● Dimension:1460×602×1700mm● Input power:Three-phase, Five-wire AC 380V±10% 50Hz/60Hz● Output power:AC 220V safety socket output● Capacity: ＜ 5.0 KVA

● Parameter of Milling Machine: Workbench move stroke: X direction :120mm Y direction:120mm Z direction:250mm Max move speed of workebnch:3000mm/min Max speed of spindle:1400r/min 25W Dimension of milling machine:740×540×730mm


■ DLDS-SKX23 CNC Maintance Training Assessment System

■ Overview● The device is composed of seat base,electrical cabinet. aluminum rail type platform● Siemens,Fanuc system are available

■ Technical Parameter● Dimension:800×600×1800mm● Input power:Three-phase, Five-wire,AC 380V±10% 50Hz/60Hz● Capacity: ＜ 5.0KVA

Back side


41


■ DLSKP-C802S22 CNC Maintenance Training System ( Industrial Machine)

■ Overview● The system is designed for mechatronic technology and application,Electrical technology application and CNC debugging & maintenance.● The system is "SINUMERIK 802s Series".● The System is constitute of CNC system, CNC workbench and CNC machine.

■ Technical Parameter● Dimension:1580×500×1630mm● Input power: Three-phase, Five-wire AC 380V±10% 50Hz/60Hz■ Technical parameter of CNC lather machine● Input power:Three-phase, Four-wire:AC 380V±10% 50Hz/60Hz● Max swing diameter of the machine:350mm● Max swing diameter of the knife rest:150mm● Max speed of the workbench:4000mm/min● Max cutting feed rate:2000mm/min● Capacity:＜5.0 KVA

Building Automatic Training Series

■ Overview● The system including intercom access control system, security and defense system, video surveillance system,fire protection system, cable television system, integrated wiring system, heating and air conditioning system and automatic curtain system,install DDC controller, WEB publishing, fire alarm host, closed circuit monitoring TV and intercom access control system

■ Technical Parameter● Dimension:5920×3492×2490mm● Input power: Single-phase, three-wire AC 220V±10% 50Hz/60Hz● Output power:AC 220V safety socket output,DC 24V、DC 18V、 DC12V safety terminal output● Capacity:＜5KVA

■ DLLY-1301A Building Automation Training System


43


■ DLLY-501A Building Automatic Technology Training Assessment System

■ Overview● The System including computer technology, network communication technology, integrated wiring technology, DDC technology. Suitable for training and teaching of intelligent building and building automation.● The system structure based on intelligent building models, including the typical structure of intelligent buildings, intelligent community,management center and corridor which covers intercom access, security, video surveillance, fire protection, integrated wiring system. Each part can run independently, but also realize the linkage.

■ Technical Parameter● Dimension:4500×2000×2600mm● Input power:Single phase, three-wire AC 220V±10％

● Output power:Single phase, three-wire AC 220V±10％:DC 24V 、DC18V 、DC12V● Capacity:≤1.0KVA


■ Overview● The system including computer technology, network communication technology, fire alarm technology, intercom access control technology and security alarm technology. Suitable for training and teaching of intelligent building and building automation.● The system structure based on intelligent building models, including fire alarm technology, intercom access control technology and security alarm technology.Each part can run independently, but also realize the linkage.

■ Technical Parameter● Dimension:4500×200×2600mm● Input power:Single phase, three-wire AC 220V±10％

● Output power:AC 220V±10％:DC 24V 、DC18V 、DC12V safety terminal output● Capacity:≤1.0KVA

■ DLLY-HAD-3 Building Automatic Training System


45

■ DLLY-QDT361 Group Control Multilayer Elevator Training System

■ Overview● The device is designed according to common vertical lift● The complete device is composed by three six layers elevators. Each elevator have a PLC controller.The PLC exchange data by RS-485 series communication card.The elevator outside call unified management

■ Technical Parameter● Dimension: 1950*400*1800mm● Input power:Single- phase, three-wire AC 220V±10％ ● Capacity:≤2.0KVA


■ DLLY-QDT262 Group Control Multilayer Elevator

■ D L L Y - D T 6 1 Six Layers Elevator


■ Overview● The device controlled by PLC and AC variale speed (VVVF).With function of automatic leveling, automatic open-closing door, run forward and response the sedan internal and external call signal, straight ahead, elevator safety running protection.And elevator stop,emergency off,up slow, down slow,lighting and fan.● The structure of the device is same to industrial elevator.

■ Technical Parameter● Dimension: 2540×660×3000mm ● Input power:Single- phase, three-wire AC 220V±10％ ,50Hz/60Hz● Capacity:＜2KVA

■ DLLYS-QDT351 Group Control Elevator Training System

■ DLLYS-DT51 Five Layers Elevator


47


■ DLLY-HYGS462 Constant Pressure Water Supply Training System

■ Overview● The system including PLC,frequency control, process control and project configuration technology.● Constant pressure water supply training set can meet the needs of the constant pressure water supply, to keep the end pressure (service pressure) in the water supply system network. The system can be in pump high efficient area inside biggest head and minimum head forecast free design pressure and flow rate.Pressure transmitter detection pipe network pressure and converted into an electrical signal to the controller.The controller compare ,calculate and distiguish the feedback signal and pressure of forecast set.And to confirm the run frequency of inverter pump or start/stop of one or more pump.

■ Technical Parameter● Dimension: 1950×400×1800mm ● Input power:Three-phase, Five-wire 380V±5% 50Hz/60Hz● Output power:AC 220V safety terminal output● Capacity: ＜ 4.0KVA

PLC Training Series

■ Overview● Modular structure close to industrial site

Without computer and drawers


49

PLC Training Series

■ DLPLC-FXGD PLC Training Equipment (Mitsubishi)

■ Overview● The device fit training of mechatronic equipment installation and maintance,mechatronic technology application,electrical run and control, electrical technology application● Module structure, colored experiments box, one experiment with one box. To increase components if need to increase experiments. The device including PLC programming software,simulation training software and training module

■ Technical Parameter● Dimension: 1800×800×1662mm ● Input power:Three-phase, Five-wire 380V±10% ,50Hz/60Hz● Output power:Three-phase, AC 380V±10% 50Hz/60Hz, Single phase,AC 220V±10% 50Hz/60Hz,DC 24V● Capacity: ＜ 1.0KVA

DLPLC-FXGA increase mitsubishi analog module on basic of DLPLC-FXGD to complete analogue experimentsDLPLC-FXGW increase network module on basic of DLPLC-FXGA to provide two kinds of networkDLPLC-FXGB increase frequency converter and three phase asynchronous motor to complete experiments of frequency control on basic of DLPLC-FXGW

PLC Training Series

■ DLPLC-SIMGD DLPLC-SIMGD PLC Training Equipment (Siemens)

■ Overview● The device fit training of mechatronic equipment installation and maintance,mechatronic technology application,electrical run and control, electrical technology application● Module structure, colored experiments box, one experiment with one box. To increase components if need to increase experiments. The device including PLC programming software,simulation training software and training module

■ Technical Parameter● Dimension: 1800×800×1662mm ● Input power:Three-phase, Five-wire 380V±10% ,50Hz/60Hz● Output power:Three-phase, AC 380V±10％ 50Hz/60Hz, Single phase,AC 220V±10% 50Hz/60Hz, DC 24V● Capacity: ＜ 1.0KVA

DLPLC-SIMGA increase Siemens anolog module on basic of DLPLC-SIMGD to complete analogue experimentsDLPLC-SIMGW increase network module on basic of DLPLC-SIMGA to provide two kinds of networkDLPLC-SIMGB increase frequency converter and three phase asynchronous motor to complete experiments of frequency control on basic of DLPLC-SIMGW.


51

PLC Training Series

■ DLPLC-DT1 Elevator Training Set

■ DLPLC-QDQ1 Responder Training Set

■ DLPLC-JTD Crossroad Traffic Light Training Set

■ OverviewThe device is composed of base board,lift car, stroke limit mechanism,call light, car gate, control panel,control motor, sensor and drive mechanism.Collect all signals to complete the logic control; Control car lift and gate open-close;Cut-off protection against lift and open-close to avoid motor offside running.

■ OverviewThis device including power indicator and control,start button, reset button, answer button, digital inverted display module,configuration software. The device complete various training content, including PLC understanding, learning, programming, training, configuration training, project training.

■ Overview The device is composed of training plateform,analog physical building, vehicle model, road model and traffic lights command. The device can simulate the real traffic lights. There are PLC I/O interface on the control panel.To provide signals by PLC.

PLC Training Series

■ DLPLC-YTHH2 Liquid Mix Training Set

■ DLPLC-YLJC1 Temperature, Pressure Training Set

■ DLPLC-SX1 Single-capacity Tank Training Set

■ Overview The deivce is combined of liquid level sensor and solenoid valve. Switch control and timing logic control on solenoid valve and water pump by collecting sensor signals to complete liquid level switch and close-circuit automatic control.Double-capacity tank DLPLC-SRSX also available

■ OverviewThe device is composed of mixing device and material storage. Both liquids are transfered to mixing device as required;The stirring motor driven stirring impeller rotate to mix the liquid. There is a solenoid valve on the below end of the mixing device which control mixed liquid flow to storage device

■ OverviewThe device combined PLC, temperature sensor and solenoid valve. Switch control and timing logic control on solenoid valve and water pump by collecting sensor signals and PLC programming to complete liquid level switch and close-circuit automatic control.


53

PLC Training Series

■ DLPLC-BT01 Frequency Conversion Speed Regulation Experiment System

■ Overview ● The device is composed of control screen, workbench,frequency conversion components, relay components, digital/analogue I/O components, three-phase asynchronous motor,motor rail and speed test mechanism● The device use Mitsubishi inverter FR-A740-0.75KW with RS485 interface

■ Technical Parameter● Dimension:1720×700×1500mm ● Input power: Three-phase, Five-wire AC 380V±10% 50Hz/60Hz● Output power: AC 380V safety terminal output● Capacity: ＜ 1.0KVA

Innovative Industrial Automatic Control Technology Training Series


55


■ Overview ● The system equipped with Siemens S7-400 as master station, and slave station including Siemens S7-300,S7-200,touch screen,ET200 and inverter.User may add components freely as required. ● The system complete follow network:PROFIBUS-DP,PROFIBUS-MPI,USS,PPI,free port communication. And it fulfill Wincc configuration.

■ Technical Parameter● Dimension:1800×700×1675mm● Input power: Three-phase, five-wire:AC 380V±10% 50Hz/60Hz● Output power：AC 380V safety terminal output AC 220V safety terminal/socket output DC 0-10V safety terminal output DC 0-20mA safety terminal output● Capacity:＜1.0KVA

■ DLGK-SIMNA Industrial Process Automation Training System


■ DLGK-ACDE1300 Industrial Automatic Control Training System

■ Overview● The device is composed by PLC,inverter,Stepper motor driver, Stepper motor and solid relay.The module consiste the complete system"control-drive-execute"● The device can complete various experiments. Such as regular low-voltage electrical and control; Control principle and wiring of PLC,Inverter setting and operating,speed regulation of Multistage frequency converter;Control and load simulation of three-phase induction motor

■ DLGK-SIMCA Innovate Industrial Automatic Control Training System (Siemens)

■ Overview● Module structure● The device can complete various experiments. Such as regular low-voltage electrical and control; Control principle and wiring of PLC,inverter setting and operating,speed regulation of Multistage frequency converter;Control and load simulation of three-phase induction motor

(Without computer)

(Without computer)


57


■ DLGK-SIMND Industrial Automatic Network Integrated Training System

(Without computer)

■ Overview● The System including electotechnics, electrical drive, PLC,inverter and touch screen● The system including three network of siemens:First one is management, use PLC S7-400 for computer distance management; Second one is process monitor,PLC S7-300 as master station and communicate with S7-400 by internet. The third one is site control which including PLC S7-200, inverter and touch screen. And communicate with second one by PROFIBUS-DP

Pneumatic Training Series

■ Overview● All the components are industrial components. Each component is independent module with quick connector. The components can build kinds of pneumatic circuit on the aluminum panel.● The control methods including pneumatic control, electrical control and manual control.The pneumatic circuit may use pneumatic control unit, independent relay control unit or PLC control unit. ● Pneumatic circuit connected by quick connector, electrical circuit connected by special connect cable with protection function. Students can design the pneumatic application system freely.

■ Technical Parameter● Dimension:1800×700×1760mm ● Input power: Three-phase, five-wire 380V±10% 50Hz/60Hz● Output power：AC 380V safety terminal output AC 220V safety terminal/socket output DC 0-10V safety terminal output DC 0-20mA safety terminal output● Capacity: ＜ 1KVA


59

■ DLQD-DP101 Basic Pneumatic Training System

■ Overview● The system is composed of workbench, silent air compressor and various pneumatic components. All the components are industrial components. Each component with quick connector to be an independent module which can build pneumatic circuit on the aluminum panel

■ Technical Parameter● Dimension:1360×650×1650mm● Input power: Single-phase, three-wire AC 220V±10% 50Hz/60Hz (For air compressor)● Capacity:＜1.0KVA

Pneumatic Training Series Pneumatic Training Series

■ DLQD-DP201 Basic Electro Pneumatic Training System

■ DLQD-DP202 Advanced Electro Pneumatic Training System

■ Overview ● The device increased configuration on basic of DLQD-DP101 as follows:Pneumatic components: solenoid valve control circuit Control parts: button control circuit, relay control circuit and various sensor Loop inductance● The main application of the system is electrical control circuit with protection connect cable

■ Overview● The device increased configuratin on basis of DLQD-DP201. Add PLC to combined with relay circuit to complete various experiments circuit● The main application of the system is electrical control circuit with protection connect cable


61

Pneumatic Training Series

■ DLQD-JXS1 Electro Pneumatic Manipulator Training Set

■ DLQD-CY1 Electro Pneumatic Process & Punch Training Set

■ Overview● The system is composed of aluminum panel,belt conveyor, manipulator, pneumatic circuit and PLC signal switching module● The device simulate industrial working process to transfer the workpieces.The sensors test the cylinder and workpiece postion and carry out the workpiece by manipulator, then transfer the workpiece by belt conveyor.


● Input power: DC24V● Capacity:≤100 VA

■ Overview● The system is composed of aluminum panel,distribution part, punching simulation, pneumatic circuit and PLC signal switching module● The device simualate industrial working condition to process and punching.To test cylinder position by various sensor and then machine & punching the model.

■ Technical Parameter● Dimension:480×300×240mm● Input power: DC 24V● Capacity:≤100 VA

Hydraulic Training Series

■ Overview● The hydraulic training series is in accordance with the teaching of vocational education and training requirements of the research and development of teaching training products. The system combined hydraulic components,execution units, relay control unit, PLC control unit together. ● Industrial components, No oil leakage.● The system train basic and advanced hydraulic control. Also the proportion and servo control can be completed on this system.


63


■ DLYY-DH101 Basic Hydraulic Training System

■ Overview● The system is composed of workbench, hysraulic pump and various hydraulic components. All the components are industrial use. Each component with quick connector to be independent module. ● The most important feature is no oil leakage.● The main components are double acting hydraulic cylinder,one-way throttle valve, 4/2 manual shuttle valve,direct-acting relief valve,4/3 manual shuttle valve,speed regulator valve and pilot shuttle valve.

■ Technical Parameter● Dimension:1360x650x1650mm● Input power: Three-phase,five-wire AC 380V±10% 50Hz/60Hz ● Capacity:≤500VA

■ DLYY-DH201 Basic Electro Hydraulic Training System

■ DLYY-DH202 Advanced Electro Hydraulic Training System


■ Overview● The system add some components and module on the basis of DLYY-DH101. Such as the control circuit of solenoid valve,button control circuit, relay control circuit and sensors response circuit.● The main application of the workbench is electrical control circuit.

■ Overview● The device increased configuratin on basis of DLQD-DP201. Add PLC to combined with relay circuit to complete various experiments circuit● The main application of the system is electrical control circuit with protection connect cable


65


■ DLYY-CY1 Electro Hydraulic Process&Punch Training Set ■ DLYY-FLS1 Hydraulic Turn Over & Stretch Training Set

■ DLYY-DH301 Proportional Hydraulic Training System

■ Overview● The system increased proportional shuttle valve and other components

■ Technical Parameter● Dimension:1590×800×1775mm● Input power: Three-phase,four-wire AC 220V±10% 50Hz/60Hz ● Output power:DC 24V safety terminal output● Capacity:≤1KVA

Servo Hydraulic Training System DLYY-DH311 is available

Sensor Training Series

■ Overview● Sensor applications in various fields of military, scientific research, industrial, agricultural, commercial, transportation, environmental protection, medical care, health, meteorology, marine, aerospace, aviation,household appliances and so on. It is basis of production automation, scientific research, measurement, detection and diagnosis system.


67

Sensor Training Series

■ Overview● This system not only suit for students, but also suit for machinery manufacturing and electrical engineers applies electrical engineer processes and process management training of industrial electrical, mechatronics engineering, electrical and mechanical equipment installation, power electrical and electronic equipment installation, automated processing, regulation and control technology and other aspects.

■ DLCG-DS120 Distance, Displacement Sensors Training System ■ DLCG-DS130 Power,Pressure,Temperature Sensors Training System

■ DLCG-DS110 Proximity Sensor Training System

Motor Training Series

■ Overview● This device combines of kinematics, logic, PLC programming control technology and mechanical drive technology● The device including PLC, sevo motor,step motor and man-machine interface● Module structure

■ Technical Parameter● Dimension:1200×630×1170mm● Input power: Single-phase,three-wire, AC220V±10% 50Hz/60Hz ● Output power:DC 24V switch power output● Capacity:≤2.0 KVA

■ DLDJ-STS01 Four Axes Motion Control Training System

■ Technical Parameter● Dimension:1360×650×1650mm● Input power:Single phase, three-wire AC380V±10% 50Hz/60Hz● Output power:DC 24V● Capacity:＜2KVA


69


■ DLDJ-ETM7114 Three-phase Asynchronous Motor Training Set

■ DLDJ-EDM13 Three-phase Asynchronous Motor Fault Simulator

■ Overview ● The simulator can complete 13 kinds of winding fault experiments equipped with three-phase asynchronous motor.

■ Technical Parameter● Start-up and speed regulation of three-phase asynchronous motor: Y-△● Rated power: Pn = 0.25KVA● Rated voltage: Un = 380V● Rated frequency: Fn = 50Hz● Rated current: In = 0.83A● Insulation Class: E-class● Enclosure protection class: IP44● Rated speed: 1400r/minNumber of poles: 4-pole cosΦ = 0.7 (no load)●Insulation resistance under normal motor : 500MΩElectric Strength: Breakdown does not occur when hot or temperature rise test is applied and the motor windings and chassis 1760V voltage lasted 1min ● Clearances and creepage distances: ≥ 3.0mm ■ DLDJ-BJ1 Step Motor Training set

■ DLDJ-BJ2 Step Motor Training set


■ Overview● Aluminum structure, modular control hanging box● The executing agency operated by a stepper motor with drive ball screw, using the rotary encoder signals to control the car move forward more precise ● User can learn stepper motor principle, shaft driving control, wiring of controller and actuator. Position control and sequence control of configuring impulse number.

■ Technical Parameter● Dimension:600×450×150mm● Input power:single phase, three-wire AC 220V±10% 50Hz/60Hz● Output power:DC 24V ● Capacity: ＜ 200VA

■ Overview● The difference of DLDJ-BJ2 and DLDJ-BJ1 is DLDJ-BJ2 do not have rotate encoder.Only stepper motor driven ball screw.


71


■ DLDJ-MMT Inverter Training Set

■ DLDJ-DSPM110 Servo Motor Training Set

■ Product Overview● Position and speed control of industrial components● Position and speed control drive● Free movement under the coordination of X-Y● Stable aluminum frame● Pneumatic cylinder and solenoid valve

■ Product Overview● Industrial inverter motor speed and direction control● Inverter training set on motor load regulator ● Multi-step speed and time configuration● PID control function● Input and output of multi-function ● Fieldbus network card (optional)

■ Technical Parameter● Dimension:400×470×180mm● Input power: single-phase,three-wire AC 220V±10% 50Hz/60Hz ● Output power:DC 24V safety terminal outputDC 0~24V safety terminal output● Capacity: ＜ 500VA

■ Technical Parameter● Dimensions:1200×750×400mm● Input power: single-phase,three-wire AC 220V±10% 50Hz/60Hz ● Output power:DC 24V safety terminal output● Capacity: ＜ 1KVA

Mechatronics Training Series (FA Series)


● Power input: single-phase,three-wire

AC 220V±10% 50Hz/60Hz

● Power output:0.4～0.6MPa

● Capacity:＜200VA

■ Product Overview● Pneumatic drive and classification system

● Real industrial components

● Basic and Advanced Training

● Apply to open architecture of the practical training

● The control module of manual / automatic

● 4mm standard electrical outlet

■ DLFA-PTP Pneumatic Manipulator Training Set


73

■ DLFA-5DPR-A Five Axes Pneumatic Manipulator Training Set

■ Technical Parameter● Dimension: 760×580×1366mm● Input power: single-phase,three-wire AC 220V±10% 50Hz/60Hz ● Output power:DC 24V safety terminal output● Capacity≤200VA

■ DLFA-JXS1 Manipulator Training Set

AIRpneumatic4mm cable

AIRpneumatic

■ Overview● The system is composed of alumnium platform,manipulator and operation parts. ● The system combines pneumatic system, sensor system, electrical control circuit, microcont ro l le r p rogramming , GRAF language program, PC debugging to be a complete system. Work process-oriented, work integrated learning mode to complete a variety of training● Three control methods: MCU, PC and PLC (without PLC). To change control methods by knob.

4mm cable 2mm cable

Mechatronics Training Series (FA Series) Mechatronics Training Series (FA Series)


■ Overview ● The system is composed of alumnium platform,manipulator, material storage area and electrical wiring area. ● The system have PLC connection port( without PLC).To proceed switch value control,position control and sequence control by PLC programming. The maniputor complete to grib,transport and place on the workbench

■ Technical Parameter● Dimension:1200×750×1500mm● Input power: single-phase,three-wire AC 220V±10% 50Hz/60Hz ● Output power:DC 24V safety terminal output● Capacity ＜ 200VA

■ Overview● The system is composed of alumnium platform,manipulator, distribution unit, belt conveyor, handling unit and electrical wiring area. ● Control start, reset and stop by button


AIRpneumatic

■ Technical Parameter● Dimension:1200×750×1500mm● Input power: single-phase,three-wire AC 220V±10% 50Hz/60Hz ● Output power:DC 24V safety terminal output● Capacity ＜ 200VA

■ DLFA-5DPR-B Five Axes Pneumatic Manipulator Training Set

2mm cable


75


■ DLFA-DT33 Three Layers Elevator Training Set

■ Overview● The device can simulate the work condition of industrial elevator. And complete lift,open-close door.● The sys tem is composed of opera t ion part,car,control part,floor indicator and PC. Three control methods: PLC, PC and MCU


4mm cable

■ DLJXS-501D Electro Manipulator Training Set

4mm cable

■ Overview● The system is composed by manipulator body and control box● The manipulator body is constitute of five axes stepper motor,belt conveyor,mechanical gear, position sensor,electro gripper and signal switch● The control part have three control methods (PLC, PC and MCU)


■ DLFA-ASRSB02 Automatic Storage and Retrieval System (Basic)

■ DLFA-ASRSA01 Automatic Storage and Retrieval System (Advanced)

■ Overview● The device simulate industrial automatic warehousing system.The device is composed of PLC controller,lifting unit, 9 storage unit and transport unit. Complete in or out warehouse manual or automatic.


AIRpneumatic

AIRpneumatic

2mm cable


■ Overview● The device has 20pcs warehouse.And has distribution, transport and carry function than DLFA-ASRSB02



77


■ Overview● The system is composed of alumnium platform, feeding and testing unit, transport and marking unit, transport and sorting unit● The system equipped with PC monitor.User can witness the complete process on PC● Three control methods:MCU, PC and PLC (without PLC). Change the control methods by knob

■ DLFA-BJJ03 Auto Marking Machine Training Set



■ DLFA-LCK1 Parking System

■ Overview● The device equipped with test display and button which indicate the parking condition. ● The device is equipped with PLC. Control parking condition by PLC command.


2mm cable



■ DLFA-CLFJ02 Material Sorting Training System

■ Overview ● The system is composed of alumnium platform, pneumatic unit, transport unit, sorting unit and electrical control part.The pneumatc part is composed of solenoid valve and cylinder;The transport unit is composed of three-phase asynchronous motor and belt conveyor● Various PLC programming available (without PLC)

2mm cable

■ Overview● This device has three cntrol methods: PLC, PC and MCU● Mutual controllability: two or more devices, remote device control can be achieved in the operation of the machine.

■ DLFA-LCK2 Parking System


79

■ DLFA-PCT Position Control Trianing System

■ DLFA-SFW Steel Feed and Rolling Machine Training System

AIRpneumatic

AIRpneumatic

2mm cable


■ OverviewThe system combined PLC, postion test control and electric technology together.To complete switch control, position control, sequential logic control for AC motors, DC motors by sensor signal acquisition, PLC programming and inverter.The system fulfill steel industry simulation technology,closed-loop control technology,Industrial components encoder,aluminum foil simulation steel,tension compensation function. It also can simulate whole process of industrial field steel feed and roll into a machine.


● Input power: single-phase,three-wire

AC 220V±10% 50Hz/60Hz

● Capacity≤500VA

■ Overview● The system can complete plane position control and control procesion movement by servo motor.

■ Technical Parameter● Dimension:1200×750×1500mm● Input power: single-phase,three-wire AC 220V±10% 50Hz/60Hz ● Capacity≤500VA


■ DLFA-BCT Conveyor Belt Buffering Training Set ■ DLFA-SCT Classification Transfer Training set

■ DLFA-MAS-S Factory Automation Manufacturing Training Set (Standard)

■ DLFA-MAS-M Factory Automation Manufacturing Training Set (Modular)

■ Overview● The system is composed of distribution unit, processing unit,pushing unit, transport unit, testing unit, sorting unit and stainless storage box.

3mm cable

AIRpneumatic

AIRpneumatic


■ Overview● Modular structure,each unit with quick connector mechanical installation.


81


■ DLFA-ALS Automatic Logic System Training Set■ DLFA-XCYD21 Car Movement Training Set

■ DLFA-mMPS-B Micro Multi-function Mechatronic Training Set (Basic)

■ DLFA-mMPS-A Micro Multi-function Mechatronic Training Set (Advanced)

3mm cableAIR

pneumatic

■ Overview

The system combined of sensors, ball screw, timing belt,

proximity switches, limit switches together.

To complete switch control, position control, sequential logic control, directional control positioning control for DC motors by sensor signal acquisition to control the movement of car.

■ DLQD-PDS Punching Modular System

■ Main Componenets

■ Overview● Non-rotating cylinder application model● Analog punch molding process

● High Brightness LED complete inspection

● Cylinder suppress punching application

■ Training Content● pneumatic, electro-pneumatic control● PLC control technology● Cylinder thrust calculation● Condition check sequence

● Sensor applications● Cylinder speed control● Usage of non-rotating cylinde● Sequence control

■ DLFA-HPC High-speed Position Control System Training Set ■ DLFA-ABTS Wind Transmission System Training Set


2mm cable

■ Overview

The system is composed of distribution unit,transport

unit,stacking unit,sensor unit, linear straight drive

unit,processing unit, pallet unit ,I/O control and

connector unit and air filter unit.

NO. Item Quantity

1 Double action cylinder 2

2 Proximity Switch 4

3 High brightness LED 1

4Tr a n s p a r e n t p u n c h

module 1

5 Punch sliding board 1

6 Maintance Unit 1

7 Solenoid Valve 1

8 PLC unit 1

9 Operation panel 1


83


■ OverviewThe electronic control part of the system is push-pull style. The actuator unit is same to DLDS-555B

■ Overview● The system is composed of aluminum workbench,control part,transport and test unit,manipulator unit and sorting unit.

■ Technical Parameter● Dimension:1500*750*1750mm● Input power: Single phase, AC220V±10%, 50Hz/60Hz● Output power:AC 220V safety socket output DC 24V safety terminal output● Capacity≤500VA

■ DLDS-555B Optical Mechatronic Training System

■ DLFA-555C Optical Mechatronic Training System

4mm cable2mm cableAIR

pneumatic


pneumatic


■ DLFA-555F Optical Mechatronic Training System

■ Technical Parameter● Dimension:1500x750x1750mm● Input power: Single phase, AC220V±10%, 50Hz/60Hz● Capacity≤1KVA

■ Overview● The system is composed of aluminum workbench,feeding and testing unit,manipulator unit, transport unit and sorting unit.● The control system is push-pull type which composed of PLC,inverter,touch screen,power supply,sensors and actuator

■ DLFA-555D Optical Mechatronic Training System


pneumatic


pneumatic

■ Technical Parameter● Dimension:1500x750x1750mm● Input power: Single phase, AC220V±10%, 50Hz/60Hz● Output power:AC 220V safety socket output DC 24V safety terminal output● Capacity≤500VA

■ Overview● The system is composed of aluminum workbench,feeding and testing unit,ASRS unit and touch screen● The system increase servo and stepper control. X spindle is controlled by servo motor and Y spindle is controlled by stepper motor.


85

■ Overview● The system including motion control system,process control system and ASRS system. The master station is Siemens S7-300, slave station is Siemens S7-200. Master station and slave station is communicated by PPI or 485

■ DLFA-321 Designer Training Assessment System


■ Technical Parameter● Dimension:1800x750x1350mm● Input power: Single phase,three-wire AC220V±10%,50Hz/60Hz● Capacity＜2KVA


■ Technical Parameter● Dimension:1882x900x1600mm● Input power: Single phase,three-wire AC220V±10%,50Hz/60Hz● Output power:AC 220V safety socket output DC 24V safety terminal output● Capacity＜2KVA

■ Overview● The system is composed of aluminum workbench,feeding and testing unit,manipulator, processing unit, assembly unit belt conveyor and sorting unit● Modular structure, composed of PLC module, inverter module, touch screen module, power supply module, stepper motor module, sensors and actuator.● Controlled by one more PLC. PLC communicate by PC or PPI cables.

■ DLDS-565A Optical Mechatronic Training System


pneumatic


87


■ DLMCS-585MS2 Optical Mechatronic Training System

■ Overview● The system is composed of aluminum workbench,feeding and testing unit,manipulator, processing unit, assembly and punching unit, ASRS and DC speed regulation unit.● The system uses a modular control unit. The control module including Mitsubishi/Siemens PLC module, Mitsubishi/Siemens converter module, dual closed loop speed control module,servo drive and servo motor module, stepper drives and stepper motor module;The control objective including feeding and testing unit module, processing unit, handling robot unit, assembly stamping unit, ASRS module.The control module and control objective can be assembly freely. ● The system has dual closed loop speed control module to drive DC motor speed regulation.

■ Technical Parameter● Dimension:1900×900×1220mm● Input power: Single phase,three-wire,AC220V±10%,50Hz/60Hz● Output power:AC 220V safety socket output DC 24V safety terminal output● Capacity＜2KVA


pneumatic

Modular Product System(MPS Series)

■ DLDS-500A Modular Product System

■ Overview● The system suitable for teaching and training of mechanical production and automation, mechatronic,electrical engineer and automatic, control energy, measurement technology, computer control and automatic control.

● The system is composed of grabbing station, punching station, assembly station, dual axes manipulator station and sorting station.

■ Technical Parameter● Dimension:2450×790×2400mm● Input power: Single phase,three-wire,AC220V±10%,50Hz/60Hz● Output power:AC 220V safety socket output● Capacity＜2KVA


89


AIRpneumatic


■ Overview ● The system is composed of distribution station, testing station, processing station, manipulator station and sorting station● The system has servo control in processing station and sorting station.● The system use MCGS industrial configuration monitor software

■ Technical Parameter● Dimension:3000×800×1420mm● Input power: Single phase,three-wire AC220V±10%,50Hz/60Hz● Capacity≤2.0KVA

AIRpneumatic

AIRpneumatic

■ Overview● The system is composed of distribution station, testing station,handling station and sorting station.● PLC is master controller● External interface can connect with different PLC. ● External interface can connect with MCU to program and control.

■ DLMPS-400A Mini Mechatronic Training System

■ DLMPS-205 Modular Product System

■ Overview● DLMPS-205 system is composed of distribution station, testing station, Pick&Place station, Fluidic Muscle Press station and sorting station. Each station of this system is installed on groove aluminium plates. Each station can be connected to be an automatic product line. All stations are composed of modular form. Each station is easy to set up, disassemble and maintance. Each station can be combined freely.

Distribution station

Sorting stationFluidic Muscle

Press station Pick&Place station Testing station

■ DLMPS-500B Modular Product System


91


AIRpneumatic

AIRpneumatic

■ DLMPS-500A Modular Product System

■ Overview ● The system is composed of distribution station, testing station, processing station, robot station, sorting station.● The robot is mitsubishi industrial robot ● PLc control (PLC is optional)


■ DLMPS-600B Modular Product System

■ Overview● The system is composed of distribution station, testing station, processing station, handling station, assembly station and sorting station.● The control software is MCGS industrial monitor software● The electrical control part can be changed according to requiremnt. ● The system suitable for teaching and training of mechanical production and automation, mechatronic,electrical engineer and automatic, control energy, computer control , motor drive and control , mechanical design and automatic control.

■ Technical Parameter● Dimension:3600×800×1420mm● Input power: Single phase,three-wire,AC220V±10%,50Hz/60Hz● Capacity≤5.0KVA

■ Overview ● The system is composed of distribution station, testing station, processing station, manipulator station, sorting station.● The manipulator is oscillating cylinder● PLC control (PLC optional)

■ DLMPS-500C Modular Product System

AIRpneumatic


93




■ Overview ● The system is composed of distribution station, handling station,processing station,handling and sorting station, conveyor station,manipulator station, assembly station, classify and sorting station.● The main components of the system including: PLC, industrial touch screen, switching power supply, hopper, classification silo, silo transposition parts, workpiece push parts, sliding push parts,rock arm part, drill motor,detection cylinder assembly, translation table, rotary table, cylinders, solenoid valves, DC gear motors, manipulator, ball screw, gripper, vacuum generator, tower crane,industrial sensors, variety of detection switches, buttons, I / O interface board and communication interface board.


Distribution station

Processing station

Classify and sorting station

Handling station

Handling and sorting station

Transport station Manipulator station

Assembly station

AIRpneumatic


95



■ Overview● To leran pneumatic, electro pneumatic, engineer control , sensor and mechatronic by this system

● The working process as follows:

Distribution

HandlingProcessing

SortingRobotBufferingTesting

ASRSPressing

■ DLFMS-600A Flexible Manufacture System

■ DLFMS-600B Flexible Manufacture System

■ OverviewUse computer to control production

processing system for CNC training.Make

the design as required

● Understand the mechanical structure and components● Pneumatic and electrical systems● PLC system● PLC network system● Electrical control system and installation● Analog and digital signal processing● Transmission system● Material processing and testing● Robot system● Process control system

AIRpneumatic

AIRpneumatic

AIRpneumatic

Flexible Manufacture System(FMS Series)


97

Flexible Manufacture System(FMS Series)

■ DLWL-800A Modular Modern Logistics Manufacture Process System

■ Overview ● The system use PROFIBUS-DP. Each unit may run independently. User may choose the necessary unit to complete different system .● The system is composed by Manipulator handling system unit,Visual testing unit, Automatic indentify buffering system unit,Stacking system unit, Electronic tag unit, ASRS unit, Goods direction control system unit, Container loading system unit.


AIRpneumatic

Manipulator handling system

Automatic indentify buffering system

Container loading system

Visual testing unit

Stacking system unit

ASRS system unit

Goods direction control system

Electronic tag unit


99

Flexible Manufacture System (FMS Series)

■ DLFMS-8000 Flexible Manufacture System

■ Overview● The system including 8 stations:Manipulator transport unit, Processing unit, Visual test unit, Sorting unit, Heat treatment unit, ASRS unit,Circuit transport Unit and PC management unit. The system can complete workpieces machining, test,heating,cooling, sorting and storage.

■ Technical Parameter● Dimension:4100x2400x1450mm● Input power: Single phase,three-wire AC220V±10%,50Hz/60Hz● Capacity≤2.0KVA

AIRpneumatic

Console Unit

Manipulator transport unit

Circuit transport unit

ASRS Unit

Processing unit

Sorting unit

Heat treatment unit

Flexible Manufacture System (FMS Series)

Visual test unit


101

■ DLFMS-1601A Flexible Manufacture System

■ Overview● The complete system including 16 stations: Control platform, Distribution station, Testing station, Manipulator station 1, Processing station, Image detection station, Pick&Place station,Hydraulic punching station, Mutsubishi robot station, finished product test station, Sorting station, Manipulator station 2, Subpackage station, Handling station, Storage station and Circuit conveyor station● High extension capacity:Electrical extension capacity and mechanical extension capacity. Each unit has extension port to connect external PLC or MCU for control and communication.

■ Technical Parameter● Dimension:8000x4250x1620mm● Input power: Single phase,three-wire AC220V±10%,50Hz/60Hz● Capacity≤ 5.0KVA

Flexible Manufacture System (FMS Series) Automobile Training System

■ DLQC-B-7 Passat Motor Training System

■ Feature● Dynamic real-time display:display engine dynamic and static signal parameters changes real-time by original instrument,digital pressure meter,Fuel pressure gauge and oil pressure guage● Detection:External detection terminals can detect and analysize the electrical control signal of sensor and actuator.detection terminal with computer data can be read,clear code and analysize waveform by decoding device.

■ Technical Parameter● Power:12V,60AH,branded battery ● Oil tank dimension:380mm×210mm×280mm Total dimension:1500mm×1000mm×1700mm

■ DLQC-B-9 Sagitar Direct Injection Spark Ignition Engine Workbench

■ Feature● Dynamic real-time display:display engine dynamic and static signal parameters changes real-time by original instrument,digital pressure meter,fuel pressure gauge and oil pressure guage. ● Detection:External detection terminals can detect and analysize the electrical control signal of sensor and actuator.detection terminal with computer data can be read,clear code and analysize waveform by decoding device.● Fault setting: can set fault by manuel or computer. easy to test.

■ Technical Parameter● Power:12V,60AH,branded battery ● Oil tank dimension:380mm×210mm×280mmTotal dimension:1500mm×1000mm×1700mm


103

■ DLQC-C-4 Stepless Automatic Transmission Training System

■ Feature● Speed motor-driven torque converter, driven by the normal gear shift of the automatic transmission, automatic transmission output shaft are configured with the brake disc, and can brake the output shaft ● Test panel to draw the models automatic transmission electronic control system schematics, panel figure corresponding AT / ECU terminal with sensors, actuators to set test hole to test the voltage signal.Equiped with display lights which show work condition of gear shift and locking.● Test panel drawing drive roadmap ,basic oil line diagram and configure the oil line pressure gauge, configuration, data transmission diagnostic interface at the same time.● Fault setting: can set fault by manuel or computer. easy to test.

■ Technical Parameter ● power supply:three-phase, 380V,50Hz/60Hz,3KW,6.8A ● Total dimension:1020mm×620mm×1800mm

■ DLQC-D-6 Passat Comprehensive Electrical Training System

■ Feature● Light, video,instruments and windshield wiper system are all available.Charging, starting, ignition, cooling system is working● Electric windows, central locking, electric mirrors, central wiring board is fully functional ● Intake, ignition, fuel injection system, dynamic display; burglar, control, and electronic systems working; equipped with data output interface● External circuit board which is easy to detection● Fault setting: can set fault by manuel or computer. easy to test.

■ Technical Parameter● Power:12V,60AH,branded battery ● Power supply:380V,1.5KW,50Hz/60Hz● Oil tank dimension:400mm×110mm×180mmTotal dimension:2200mm×700mm×1820mm

■ DLQC-D-2 Manual Air-conditioning Training System

■ Feature● New Santana 2000 cooling system,work bench ,assembly same to in i t i a l veh ic le . ● Air-condition compressor,condenser fan i s con t ro l l ed by swi tch power which i s convenient ans safe.Flow can be changed. ● Equiped with pointer type double meters which show high pressure and lower pressure in time.●Digital thermometer show outlet temperature of evaporimeter● Fault setting: can set fault by manuel or computer. easy to test.

■ Technical Parameter● Power supply:380V 1.5KW 50Hz/60Hz ● Total dimension:1040mm×1000mm×1130mm

■ DLQC-D-3 Auto Air-conditioning Training System

■ Feature● The power supply is motor.Controller and internal are visuable● Air-condition compressor,condenser fan is controlled by switch power which is convenient ans safe.Flow can be changed. ● The bench panel supporting painted circuit diagram of the air conditioning system,external computer board terminals to facilitate the detection. ● The refrigeration coefficient is high, low pressure instrument always know the pipeline dynamic; sensor data via LED digital meter● Fault setting: can set fault by manuel or computer. easy to test.

■ Technical Parameter● Power supply:380V 1.5KW 50Hz/60Hz 6.4A ● Total dimension:1700mm×1000mm×1800mm

Automobile Training SystemAutomobile Training System


105

■ DLQC-E-5 Electronical Controlled Fuel Injection System Sensor Actuator Training System

■ OverviewComposed of six work units:● Regulated power supply system;● Sensors, actuators, analog signal generator;● Speed and position sensors experimental unit;● Inlet air flow rate,pressure sensor experiment unit;● Temperature sensor experimental unit;● Oxygen sensor, knock sensor experimental unit

● Feature ● Each unit can work independently● Throttle signals directly controlling the driving motor● Signal generator output can directly drive actuators● Fuel injection pulse width table (real-time signal)● Tachometer, frequency tables accuracy of the decimal point floating-point control, basically no error ● Knock sensor with synchro LED dispaly ● Oxygen sensor can be tested individually, which can simulate the exhaust anoxic conditions

■ DLQC-CAN Automative Body Bus System Training Set

■ OverviewNew Passat B5 Can-bus system components,sensor,actuator,experiment panel,workbench.It is fit for teaching of cn-bus system structure and maintance.it can fulfill the teaching requirement of electrical control petrol motor structure,work principle,fault setting and diagnosis.

■ Feature● Show the compose and working process of comfort system and dynamical system ●Dianosis connection function,dianosis CAN digtal transimission net and terminal controm unit by auomative fault computer diagnostic unit ●Detection:color circuit panel and the detection diagnostic SITE combination can repeat various parameter of the nondestructive detection circuit system●Fuel injection pulse width table (real-time signal)●LED light show system synchronous hint to CAN system ●Fault setting: can set fault by manuel or computer. easy to test

Automobile Training System

German Standard

1 dolang technology equipment...

Documents