1 construction general construction - … · · 2016-04-191 construction -general construction...

We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany1

CONSTRUCTION

GENERAL CONSTRUCTIONCONSTRUCTION – QUICK HITCHES & BUCKETS

CONSTRUCTION – TILTROTATORS

CONSTRUCTION – LANDSCAPING & SNOW REMOVAL

CONSTRUCTION – UTILITIES, OIL & GAS

SCRAP PROCESSING

DEMOLITION

MATERIAL HANDLING

RAILWAY

CUSTOM UNITS

2

1

3

4

5

6

7

8

9

10

CONSTRUCTION - GENERAL CONSTRUCTION1

2015

kinshofer Worldwide

What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.

Kinshofer France S.A.R.L. FRANCE

1986

Kinshofer Aponox Oy FINLAND2009

Kinshofer North America CANADA2000

Kinshofer UK UNITED KINGDOM1984

Kinshofer GmbHHeadquarters Marienstein, GERMANY1971

DEMAREC B.V. THE NETHERLANDS

2006

RF-System ABSWEDEN

2011

Darda Kinshofer Construction Machinery Co. Ltd.

PR CHINA2008

Kinshofer USA UNITED STATES OF AMERICA

2013

AUGER TORQUE Europe Ltd.UNITED KINGDOM

2015

A History of Quality and Success For more than 40 years we have specialized in the development and construction

of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!

ALWAYS IN MIND – OUR CLIENT‘S NEEDS

THERE IS NO ALTERNATIVE TO QUALITY

KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, Tiltrotators and rotary actuators. The headquarters of the medium-sized company is located in the Bavarian village Waakirchen/Marienstein, Germany. Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on August 4, 1971 in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach in 1975. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. In 1979, the company‘s first rotator with 360° endless rotation was developed. The company changed its name to KINSHOFER Greiftechnik GmbH in 1980, and the first sales activities in the United States and the UK took place. In 1984, the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd. Alfred Kinshofer sold his shares in 1987, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France. Planning began in 1997 for factories in the Austrian village of Gmünd and the Czech České Velenice, and one year later MARS Greiftechnik was founded and production started.In the year 2000, KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America. A major milestone for KINSHOFER occurred in 2003: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company. In 2006, the company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools Demarec B.V. was acquired.The worldwide operating Swedish company Lifco AB acquired KINSHOFER GmbH in 2007. Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in 2008 in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland with the main focus on NOX Tiltrotators. As the year 2011 came to an end, KINSHOFER acquired the Swedish company RF-System AB, as well as the intellectual property and distribution rights of New Zealand‘s Wedgelock Equipment Ltd. at the beginning of 2012, further broadening the available product range. In 2013, the new KINSHOFER US factory opened in Sanborn in the state of New York.KINSHOFER and the UK based company Auger Torque Europe Limited announced on February 3rd 2015 that they have signed a definite agreement to merge. Under the terms of the agreement KINSHOFER has acquired 100% of the shares of Auger Torque Europe Ltd. and Auger Torque Australia Pty Ltd.. Auger Torque is a manufacturer of earth drills, augers, trenchers and other high quality attachments for excavators, skidsteers, backhoes, telehandlers, tractors, truck cranes & more.

KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself. Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer.In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations. Always close to the client – up front, everywhere ...

Primary Demolition Secondary Demolition Steel

Landscaping / Snow Removal Road Construction Civil Engineering Utilities

Scrap Metal Scrap Tires Scrap Rails

Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different ope-rating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox Tiltrotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell ex-change and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!

No matter if demolishing, breaking, comminuting or separating – with attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for excavators of up to 80t operating weight – the perfect soluti-on for each weight and task is available.Innovations do not fall short: the MQP with its strong power thanks to the - cylinder, or the , making the exchange of jaws possible within only a few minutes on site!

Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!

Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined

with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined

with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

Construction Off-Shore Nuclear Pipeline / Geothermal

Waste Bulk Material & Dry Cargo Timber

Rail Track Construction Rail Track Maintenance Scrap Rails

It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Excavators from 11t to 80t operating weight can be equipped. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: the extraordinary C80H re-hand-ling clamshell bucket with the incredible volume of 5000 litres!

As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!

There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!


Being a versatile and challenging application, the general construction requires the perfectly adapted tools, to meet the demands of the client and the task itself. From multi purpose grapples for excavators with up to 27 t / 59400 lbs operating weight, to compactor plates, rock grabs and Tiltrotators, up to clamshell buckets in different sizes and versions for excavators with up to 25 t/ 55000 lbs operating weight: KINSHOFER provides the proper attachment for every application. Quality, versatility and the customer‘s satisfaction always come first.

The Multi Purpose Grabs of the A-series are available for excavators with

1-27 t operating weight

Flexible use: Demolition and Sorting Grabs of the

D-series

The perfect combination: the MAV Compactor attached to a NOX Tiltrotator

Versatility due to the fast and economic

shell exchange: the Grabs of the C-VE-series with

exchangeable shells

The NOX Tiltrotator provides highest efficiency for every site - a cylinderless universal joint with 360° endless rotation

Increases the flexibility of each tool: the RA Rotary Actuator with up to 2 x 90° tilting angle

No matter if small or large poles, tubes or pipes: the KM 930E Manipulator facilitates your task

(here custom unit shown)

Ideal for the loading and positioning of large rocks: the R-series Rock Grabs

Ideal for levelling slopes or clearing the road: the SKB Brush is the perfect help, no matter if summer or winter season

General Construction ....... includes a wide range of applications, amongst

others landscaping, road construction or snow removal. No matter the task, KINSHOFER provides the perfect tool !


Contents

Cata

log

effec

tive

Janu

ary

2015

—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com

Summary Listed by Operating Weight of Excavator 8

PremiumLine 10

NOX Tiltrotators

for excavators with 3t / 6600 lbs to 25t / 55000 lbs operating weight: TR06NOX / TR10NOX / TR18NOX / TR25NOX 15

proportional control systems 16

TC Tilt Couplers

for excavators with 3t / 6600 lbs to 23t / 50600 lbs operating weight: TC05 / TC09 / TC14 / TC20 18

Clamshell Buckets

for excavators with up to 2t / 4400 lbs operating weight with horizontal cylinder: C02H 19


for excavators with up to 9t / 17600 lbs operating weight with HPXdrive: C05HPX / C08HPX 21 with horizontal cylinder: C05H 22 with horizontal cylinder: C08H 23 with vertical cylinder: C08V 24 with vertical cylinder: C08F 25 with vertical cylinder and exchangeable shells: C08VE 26



for excavators with up to 12t / 26400 lbs operating weight with vertical cylinders and exchangeable shells: C12VE 29 exchangeable shells for C12VE 30

for excavators with up to 18t / 39600 lbs operating weight with vertical cylinders and exchangeable shells: C18VE 31 exchangeable shells for C18VE 32

for excavators with up to 25t / 55000 lbs operating weight with vertical cylinders and exchangeable shells: C25VE 33

Multi Purpose Grabs

for excavators with up to 27t / 59400 lbs operating weight with horizontal cylinders: A12H/A15H/A20H/A27H 34

Demolition and Sorting Grabs

for excavators with up to 27t / 59400 lbs operating weight with horizontal cylinders: D15H/D20H/D27H with metal ribs and 35 D12H-P/D15H-P/D20H-P/D27H-P with perforated shells

for excavators with up to 80t / 176000 lbs operating weight with horizontal cylinder: D15H-P-75HD / D16H-P-90HD / D19H-P-85HD / 36 D20H-P100HD / D24H-P100HD / D32H-P-110HD with perforated shells

Rock Grabs

for excavators with up to 13t / 28600 lbs operating weight with horizontal cylinders: R12H 37

for excavators with up to 27t / 59400 lbs operating weight with horizontal cylinders: R20H/R27H 38

Manipulators

Barrier Lifter for excavators with up to 27t / 59400 lbs operating weight: KM 932MB 39

Manipulator for excavators with up to 25t / 55000 lbs operating weight: KM 930E 40

Compactors / Multi Purpose Compactors

for excavators with up to 45t / 99000 lbs operating weight: Compactor MAV 41

for excavators with up to 24t / 52800 lbs operating weight: Multi Purpose Compactor MAU 41

Grinder

for excavators with up to 7t / 15400 lbs to 50t / 110000 lbs operating weight: Disc Grinder STF 42

for excavators with up to 2t / 4400 lbs to 22t / 48400 lbs operating weight: Asphalt Grinder PLB 42

Sweepers and Brushes

Sweeper Roller for all loaders and excavators with an operating weight >1t / 2200 lbs: SKB 10 / SKB 15 / SKB 20 / SKB 26 / SKB 30 43

Rotor Brush for excavators with up to 20t / 44000 lbs operating weight: ROB 20 43

Bucket Sweeper for excavators with 5t / 11000 lbs to 24t / 52800 lbs operating weight: SKS 15/SKS 20/SKS 26/SKS 30 44(also available for loaders)

Frost and Ice Ripper

for excavators with up to 60t / 132000 lbs operating weight: TJR 2/TJR 4/TJR 6/TJR 8/TJR 12/TJR 14/TJR 20/TJR 24/TJR 30/TJR 35/TJR 40 45

Buckets

see catalog CONSTRUCTION - QUICK HITCHES & BUCKETS

Accessories & Technics

Additional & Small Parts 46

Accessories for Cardanic and Rigid Mounting 47

kinshofer Rotator Line 49

Technics 50

Exchangeable Shells HPXdrive 51


Summary Listed by Operating Weight of Excavator

Type Operating Weight of Excavator (t / lbs)

Tiltrotators 1 2 3 4 5 6 7 8 9 10 ... 15 16 17 18 19 20 21 22 23 24 25

TR06NOX 6600 8800 11000 13200

TR10NOX 11000 13200 15400 17600 19800 22000

TR18NOX 19800 22000 ... 33000 35200 37400 39600

TR25NOX 39600 41800 44000 46200 48400 50600 52800 55000

Rotary Actuators1 2 3 4 5 6 7 8 9 10 ... 14 15 16 17 18 19 20 21 22 23 24

TC05 6600 8800 11000

TC09 13200 15400 17600 19800

TC14 22000 ... 30800

TC20 33000 35200 37400 39600 41800 44000

Clamshell Buckets 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... 25

C02H 2200 4400

C03H 4400 6600

C05H 6600 8800 11000 13200

C05HPX 6600 8800 11000 13200

C08H 8800 11000 13200 15400 17600 17600

C08V 8800 11000 13200 15400 17600 17600

C08F 8800 11000 13200 15400 17600 17600

C08VE 8800 11000 13200 15400 17600 17600

C08HPX 11000 13200 15400 17600 17600

C10H 13200 15400 17600 19800 22000

C12H 19800 22000 24200 26400

C12VE 19800 22000 24200 26400

C18VE 28600 30800 33000 35200 37400 39600

C25VE 41800 44000 ... 55000

Multi Purpose Grabs10 11 12 13 14 15 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 ... 40

A12H 22000 24200 26400

A15H 26400 28600 30800 33000

A20H 30800 33000 ... 39600 41800 44000

A27H 39600 41800 44000 46200 48400 50600 52800 55000 57200 59400

Multi Purpose Grabs10 11 12 13 14 15 ... 18 19 20 21 22 23 24 25 ... 27 ... 30 31 ... 40

D12H-P 22000 24200 26400

D15H 24200 26400 28600 30800 33000

D15H-P 24200 26400 28600 30800 33000

D15H-P HD 22000 24200 26400 28600 30800 33000 ... 39600

D16H-P HD 26400 28600 30800 33000 ... 39600 41800

D19H-P HD 26400 28600 30800 33000 ... 39600 41800 44000 46200 48400 50600 52800

D20H 30800 33000 ... 39600 41800 44000

D20H-P 30800 33000 ... 39600 41800 44000

D20H-P HD 26400 28600 30800 33000 ... 39600 41800 44000 46200 48400 50600 52800 55000

D24H-P HD 33000 ... 39600 41800 44000 46200 48400 50600 52800 55000 ... 59400 ... 66000

D27H 39600 41800 44000 46200 48400 50600 52800 55000 ... 59400

D27H-P 39600 41800 44000 46200 48400 50600 52800 55000 ... 59400

D32H-P HD 41800 44000 46200 48400 50600 52800 55000 ... 59400 ... 66000 68200 ... 88000

Rock Grabs10 11 12 13 14 15 ... 18 19 20 21 22 23 24 25 26 27 ... 30 31 ... 40

R12H 22000 24200 26400 28600

R20H 30800 33000 ... 39600 41800 44000

R27H 39600 41800 44000 46200 48400 50600 52800 55000 57200 59400


Summary Listed by Operating Weight of Excavator

Type Operating Weight of Excavator (t / lbs)

Manipulators7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

KM 932MB 39600 41800 44000 46200 48400 50600 52800 55000 57200 59400

KM 930-1000E 15400 17600 19800 22000 24200 26400

KM 930-2000E 35200 37400 39600 41800 44000 46200 48400 50600 52800 55000

Compactors / Multi Purpose Compactors1 ... 5 6 8 9 10 12 14 16 18 19 21 ... 24 25 ... 35 ... 40 41 45

MAV 08 2200 ... 11000 13200 17600

MAV 18 19800 22000 26400 30800 35200 39600

MAV 35 41800 46200 ... 52800 55000 ... 77000

MAV 40 55000 ... 77000 ... 88000

MAV 45 90200 99000

MAU 06 2200 ... 11000 13200

MAU 08 11000 13200 17600

MAU 14 19800 22000 26400 30800

MAU 18 26400 30800 35200 39600

MAU 24 41800 46200 ... 52800

Grinder2 3 4 5 6 7 8 9 10 11 12 ... 20 21 22 23 24 25 ... 30 ... 50

STF 15100 15400 17600 19800 22000 24200 26400 ... 44000 46200 48400 50600 52800 55000 ... 66000 ... 110000

STF 1870 15400 17600 19800 22000 24200 26400 ... 44000 46200 48400 50600 52800 55000 ... 66000 ... 110000

PLB 300 4400 6600 8800 11000 13200

PLB 450 13200 15400 17600 19800 22000 24200 26400

PLB 600 26400 ... 44000 46200 48400

Brushes3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

SKS 0904 6600 8800 11000 13200

SKS 1104 6600 8800 11000 13200

SKS 1106 15400 17600 19800 22000 24200 26400

SKS 1225 22000 24200 26400 28600 30800

SKS 1375 26400 28600 30800 33000 35200

SKS 1685 30800 33000 35200 37400 39600

SKS 1856 39600 41800 44000 46200 48400

SKS 2356 39600 41800 44000 46200 48400

SKS 2506 44000 46200 48400 50600 52800

Frost and Ice Ripper1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 ... 35 36 ... 39 40

TJR 2 2200 4400

TJR 4 4400 8800

TJR 6 8800 13200

TJR 8 13200 17600

TJR 12 17600 22000 26400

TJR 14 26400 30800

TJR 20 30800 35200 39600 44000

TJR 24 44000 48400 52800

TJR 30 52800 57200 61600 66000

TJR 35 66000 ... 77000

TJR 40 77000 79200 ... 85800 88000

Legend:

horizontal cylinder (H = horizontal)

vertical cylinder (V = vertical, type E = with exchangeable shells)

HPXdrive

others


Clamshell Buckets with HPXdrive page

C05HPX-40 Clamshell bucket with HPXdrive complete package with bolt-on teeth, rotator, non-return valve and hose guard, volume 115 l / 0.15 c.y.

20


20


20


20


20

Clamshell Buckets with Exchangeable Shells page

C12VE-60 Clamshell bucket with exchangeable shells complete package with bolt-on teeth, rotator, non-return valve, hose guard and 2 welded eyes

28


26


44


30


Top Products now with Shorter Delivery Time

Ready-to-Mount and Optimally Adapted Complete Packages

Professional Tools for Professional UsersGUARA

NTEED



Professional Tools for Professional Users

Tiltrotators page

TR06NOX Tiltrotator 15




Tilt Couplers page

TC05-100 / TC05-140 / TC05-180 Tilt couplers 18



TC20-140 Tilt couplers 18


Heavy Duty Demolition and Sorting Grabs page

D15H-P-75HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve

35


35


35


35


35


35


Multi Purpose Compactors page

MAU 06 Multi purpose compactor for excavators with 1t / 2200 lbs to 6t / 13200 lbs operating weight

40


40


40


40


40



Professional Tools for Professional UsersGUARA

NTEED



Professional Tools for Professional Users

Asphalt Cutters

ASF M 40-50 Asphalt cutter with quick coupling S40, S45 or S50 40

ASF M 60 Asphalt cutter with quick coupling S60 40

Compactor Plates

MVP 06 Compactor plate 40






Compactors with Rigid Compactor Plate page

MAV 08 Compactor for excavators with 1t / 2200 lbs to 8t / 17600 lbs operating weight

40


40


40


40


40

Mounting Versions: with head plate plus rotator and / or quick hitch, etc., see p. 40


10 t … 15 t … 18 t … 25 t … 32 t … 40 t … 50 t…5 t…3 t

TR06NOX / TR10NOX / TR18NOX / TR25NOXTiltrotatorsExperience and innovation have led to one of the most advanced tools for excavators – the NOX Tiltrotator: continuous 360° rotation and a tilting angle of up to 2 x 55° make it a universal joint. Combined with quick change system and various attachments this means highest efficiency at any construction site. The NOX Tiltrotator range is optimally engineered to suit excavators with an operating weight from 3t / 6600 lbs to 25t / 55000 lbs.l Precision and safety due to „smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilt force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket in small, deep canals, even under or in between existing tubes. l Low maintenance: worm drive runs in permanent greasing. For further information see our Catalog CONSTRUCTION - TILTROTATORS

Requirements of ExcavatorHydraulic system: minimum of one single acting hydraulic circuit (hammer valve with free return line to tank)

double acting hydraulic circuit equally possible for DF4, DF8 and DF10 models (not CSP/CSS)Operating pressure: 25 MPa (250 bar) / 3600 psi [TR25NOX: 30 MPa (300 bar) / 4320 psi]; max. backflow pressure 1 MPa (10 bar) / 144 psiElectrics (for CSS and CSP): electric supply 12V or 24 VTechnical Drawings

Tiltrotator TR06NOX / TR10NOX / TR18NOX / TR25NOX with 360° rotationType Excavator Self Width Length Height max. Width Tilting Tilting Rotating Rotations Rotary

operating weight1) A2) B2) C2) bucket angle torque3) torque5) / min feedthroughweight (t/lbs) (app. kg/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (°) (kNm/ft.lbs) (Nm/ft.lbs) (RPM) (l/min / GPM)

TR06NOX >3-6 120 185 500 370 13002 x 50

8,5 constant 45009,07) 40

>6600-13200 264 7.28 19.69 14.57 51.18 6270 constant 3320 10.57

TR10NOX>5-10 220 205 610 445 1600

2 x 55 10,5 constant 6500

7,57) 40 [7010)]]>11000-22000 484 8.07 24.02 17.52 62.99 7745 constant 4795 10.57 [18.4910)]

TR18NOX >9-18 460 225 740 530 2000 2 x 50 22,5 constant 8000 7,08) 120>19800-39600 1012 8.86 29.13 20.87 78.74 16595 constant 5900 31.70

TR25NOX>18-25 610 260 760 650 2200

2 x 50 44 constant 90006)

7,09)80 [80 +180]11)

21.14 [21.14 + 47.56]>39600-55000 1342 10.23 29.92 25.60 86.61 324504) constant 66386)

1) total weight incl. upper suspension, excl. quick coupler 2) reference: TR06NOX S40/S40, TR10NOX S45/S45, TR18NOX S60/S60, TR25NOX S70/S70 3) at 25 MPa / 3600 psi 4) at 30 MPa / 4320 psi 5) at 25 MPa / 3240 psi and vertical axis 6) at 20 MPa / 2880 psi 7) CSP & CSSat 30 l/min / 7.93 GPM 8) CSP & CSS at 40 l/min / 10.57 GPM 9) CSP at 80 l/min / 21.14 GPM 10) for DF8 and DF10 control 11) Standard: 1 Extra function (80 l/min / 21.14 GPM); Advanced: 2 Extra functions (80 l/min+180 l/min / 21.14+47.56 GPM)

Standard package consists of: tiltrotator, control system, upper suspension or coupling, lower coupler or quick coupler

AccessoriesGripper Description Self Dimensions max. Opening Closing Closing Load

weight D x E x F14) width G time15) force capacityType

hydraulic gripper module, rigidly mounted to the NOX, can be used to pose masts, tubes etc. without the necessity of changing an attachment

(app. kg/lbs) (mm/in) (mm/in) (sec.) (kN/lbf) (kg/lbs)

TRG06 40 / 470 x 515 x 140 415 / 1.5 7.5 / 300 /88 10.5 x 20.3 x 5.5 16.34 1650 660

TRG10 80 / 600 x 675 x 205 610 / 1.3 10 / 500 /176 23.6 x 26.6 x 8.1 24.02 2200 1100

TRG18 113 / 700 x 715 x 265 713 / 1.7 18 / 900 /249 27.6 x 28.2 x 10.4 28.07 3960 1980

TRG25 195 / 895 x 760 x 295 1100 / 2.0 19.5 / 1400 /429 35.2 x 29.9 x 11.6 43.31 4290 3080

14) see technical drawing 15) at 25 l/min / 6.61 GPM

TR25NOX

lower quick hitch continuous rotation (360°)

tilt angle

Total height depending on mounted adapters

GripperTRG06

Tiltrotator TR18 S60 S60

quick coupler

C

50°A

B

D

E

FG


10 t … 15 t … 18 t … 25 t … 32 t … 40 t … 50 t…5 t…3 t

Proportional Control Systems

Functions CSP NOXPROP

DF10 DF8 DF4 CSP SVAB

CSS

Hydraulic circuit needed 1) 1s 2d - 4d 2d - 3d 2d 1s 1s

Quick coupler hydraulics 2) integrated required required integrated integrated integrated

Control valves in excavator NO YES YES YES NO NO

Functions tiltrotator T+R+E+C T+R+E(x2)+C T+R+E+C R / T+E+C T+R+E+C T+R+E+C

Control valves in tiltrotator 3) YES NO NO YES YES YES

Number of extra functions 1 / 2 2 1 1 1 2

Adapted to TR06NOX 4) 5)



Adapted to TR25NOX 4) 5) Description:1s One single acting hydraulic circuit (hammer line)

2d Two double acting hydraulic circuits are available in the machine (high pressure as well as high flow) and functions can be controlled proportional or ON/OFF depending on the machine

3d Three (or two) double acting hydraulic circuits are available in the machine (high pressure as well as high flow) and functions can be controlled proportinal or ON/OFF depending on the machine

T+R+E+C Tilt, rotation, extra function, hydraulic quick coupler

T+R+E(x2)+C Tilt, rotation, 2 x extra function, hydraulic quick coupler

R / T+E+C Circle 1 controls the rotation, circle 2 manages tilt, extra function, hydraulic quick coupler1) Free return line must be available or must be installed for tiltrotator2) Most quick couplers need a double acting hydraulic circuit. Please always specify LQC model and hydraulics before choosing controlling system

3) Only with CSP and CSS control systems all functions will be controlled by directional valves in the tiltrotator. All other DF control systems must have 6/2 directional valves in order to split circuits. 6/2 directional valves are not included in the prices. Also 2/2 directional valve to operate a hydraulic LQC must be installed on the machine and is not included in the price.

4) 2 extra functions possible5) 1 extra functions possibleNote: 1. Mechanical LQC can be used with all control systems

2. Hydraulic upper quick coupler must be controlled seperately and not by the standard control system

Pictures

left joystick right joystick

left buttonextra function

left proportional controller

right proportional controller

CSP NOXPROPOperators can now control the actions of their NOX-Tiltrotator with two joysticks. Quick Coupler and attached tools are also operated comfortably and effectively by means of the smart NOXPROP Control System: tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously. The extra function is controlled proportionally, too. A separate display module is included.

Control Systems for NOX TiltrotatorsType Description

CSP NOXPROP Tilt, rotation, extra function proportional; choice of tool or profile via display; configuration via laptop

DF10 All functions are controlled by the excavator directly; max. 5 double acting circuits can be connected; 2 extra functions + quick coupler (6-port swivel)

DF8 All functions are controlled by the excavator directly; max. 4 double acting circuits can be connected; 1 extra function + quick coupler (4-port swivel)

DF42 double acting circuits required. Circuit 1 controls rotation, circuit 2 manages tilt, extra function plus quick coupler. The change between the functions is controlled by integrated solenoid valves. A free ON/OFF button at the joystick is required. The quick coupler is controlled by a security switch on the included display module.

CSP SVAB Tilt, rotation proportional; extra function ON/OFF; limited choice of profiles via display; configuration only by controllerCSS All functions ON/OFF; no choice of profile possible; control via ON/OFF-buttons


Main Benefits

NO HYDRAULIC CYLINDERSl Compact designl No protruding, disturbing parts such as cylindersl Narrow width

LARGE TILTING ANGLEl Up to 2 x 55°l More flexibility

SERVICE FRIENDLYl Only 2 greasing pointsl Easy installationl Less wear partsl Solid cast housingl Integrated hydraulics

PATENTED TILTING FUNCTIONl Elliptic piston design, only one threadl Closed system - less damage risksl Constant tilting force

HIGH FLOW SWIVELl High flow swivel as standard - up to 180 l/min / 47.56 GPMl Large variety of attachments availablel Good tolerance against back pressure

SUITABLE KINSHOFER CONTROL SYSTEMSl Smooth controll More safety and precision

nox-Tiltrotators


9 t … 14 t … 20 t … 23 t … 28 t … 35 t…5 t…3 t

Tilt Couplers (Kinshofer Wedgelock-Style) TC05 to TC20

Requirements of Excavator

Hydraulic system: 2 double acting hydraulic circuitsOption: external pressure relief valveWorking pressure: max. 25 MPa / 3600 psi (to be preset at excavator)

Technical Drawings

Rotary Actuators incl. Upper Bracket and hydraulic Kinshofer Wedgelock Quick Coupler

Type Excavator operating Tilt angle Torque (tilt)1) Holding torque1) Recommendedweight (t/lbs) α max. (°) (kNm/ft.lbs) (kNm/ft.lbs) oil flow (l/min / GPM)

TC05-100 DM/CMI-037 3 - 5 / 6600 - 11000 2 x 50 3,5 / 2580 6,0 / 4425 5 - max. 10 / 1.32 - max. 2.64TC05-140 DM/CMI-037 3 - 5 / 6600 - 11000 2 x 70 3,5 / 2580 6,0 / 4425 5 - max. 10 / 1.32 - max. 2.64TC05-180 DM/CMI-037 3 - 5 / 6600 - 11000 2 x 90 3,5 / 2580 6,0 / 4425 5 - max. 10 / 1.32 - max. 2.64TC09-100 DM/CSI-055 4 - 6 / 8800 - 13200 2 x 50 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-100 DM/CSI-070 6 - 9 / 8800 - 19800 2 x 50 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-140 DM/CSI-055 4 - 6 / 8800 - 13200 2 x 70 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-140 DM/CSI-070 6 - 9 / 8800 - 19800 2 x 70 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-180 DM/CSI-055 4 - 6 / 8800 - 13200 2 x 90 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-180 DM/CSI-070 6 - 9 / 8800 - 19800 2 x 90 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC14-100 DM/CMI-130 10 - 14 / 22000 - 30800 2 x 50 12,6 / 9290 21,4 / 15780 14 - max. 28 / 3.70 - max. 7.40TC14-140 DM/CMI-130 10 - 14 / 22000 - 30800 2 x 70 12,6 / 9290 21,4 / 15780 14 - max. 28 / 3.70 - max. 7.40TC14-180 DM/CMI-130 10 - 14 / 22000 - 30800 2 x 90 12,6 / 9290 21,4 / 15780 14 - max. 28 / 3.70 - max. 7.40TC20-140 DM/CMI-170 19 - 23 / 41800 - 50600 2 x 70 22,0 / 16225 37,4 / 27580 20 - max. 40 / 5.28 - max. 10.57TC20-140 DM/CMI-210 19 - 23 / 41800 - 50600 2 x 70 22,0 / 16225 37,4 / 27580 20 - max. 40 / 5.28 - max. 10.57

1) at 25 MPa (250 bar) / 3600 psi

Accessories

Control kit Wedgelock

Experience and innovation have led to one of the most advanced tools for excavators – the KINSHOFER Rotary Actuator. A tilting angle of 2 x 50° up to 2 x 90° makes it an agile joint.Combined with a quick coupler system and various attachments this means high efficiency at any construction site: The TC Series range is optimally engineered to suit excavators with an operating weight of 3t / 6600 lbs to 23t / 50600 lbs.l Most compact design – minimal height and length.l High and constant tilting torque.l Wide tilting angle 100° / 140° / 180° (up to TC14).l High durability and long lifetime by special alloy cast body and single thread arrangement.l Less maintenance: elliptic tilting drive runs in permanent oil bath. Small number of seals.l Versatile usage for quick coupler systems, tilting buckets and other special applications. l Single RA drive available on request.l Here with Kinshofer Wedgelock Quick Coupler.

90°2x

RA14-180

TC14-180

with upper bracket and Wegdelock quick coupler


Clamshell Bucket

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C02H

Clamshell Bucket C02H

Type Width E Opening A Height C max. Volume Number of Self weight Load capacity(mm/in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) teeth (kg/lbs) (kg/lbs)

C02H-25 250 / 9.84 725 / 28.54 750 / 29.53 25 / 0.03 3 92 / 202 1000 / 2200C02H-30 300 / 11.81 725 / 28.54 750 / 29.53 30 / 0.39 3 99 / 218 1000 / 2200C02H-40 400 / 15.75 725 / 28.54 750 / 29.53 45 / 0.59 4 112 / 246 1000 / 2200

Package consists of: clamshell bucket, bolt-on teeth, Kinshofer rotator, non-return valve and hose guard

KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection

(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)

KM 04 F 84 x 30 / 3.31 x 1.18 850 / 625 3000 / 2215

Accessories

Type DescriptionKM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW01 cardanic adapter for Lehnhoff grab exchange system SW/MS01 without suspension – up to 2t / 4400 lbsSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbs

adapter for quick exchange systems from other manufacturers availableKM 680 1t-4t scraper


Operating pressure (open/close): max. 20 MPa (200 bar) / 2880 psiRecommended oil flow (open/close): 10 - max. 40 l/min / 2.64 - max. 10.57 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM

Technical Drawings

Robust clamshell bucket in compact form for mini excavators up to 2t / 4400 lbs operating weight.

l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.l Reduced wear resulting from generously dimensioned bearing system. l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces

(24 kN / 5280 lbf at an operating pressure of 20 MPa / 2880 psi).

E

Cm

ax

A


Clamshell Bucket

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C03HRobust clamshell bucket in compact form for mini excavators from 2t / 4400 lbs to 3t / 6600 lbs operating weight.

l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.

l Reduced wear resulting from generously dimensioned bearing system. l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces

(26 kN / 5720 lbf at an operating pressure of 26 MPa / 3744 psi).l Cylinder protection included (starting at width 350 mm / 13.78 in).


Type Width E Opening A Height C max. Volume Number of Self weight Load capacity(mm/(in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) teeth (kg/lbs) (kg/lbs)

C03H-25 250 / 9.84 930 / 36.61 850 / 33.46 45 / 0.06 3 130 / 286 1500 / 3300C03H-30 300 / 11.81 930 / 36.61 850 / 33.46 55 / 0.07 3 135 / 297 1500 / 3300C03H-35 350 / 13.78 930 / 36.61 850 / 33.46 65 / 0.09 4 145 / 319 1500 / 3300C03H-40 400 / 15.75 930 / 36.61 850 / 33.46 75 / 0.10 4 150 / 330 1500 / 3300C03H-45 450 / 17.72 930 / 36.61 850 / 33.46 85 / 0.11 4 160 / 352 1500 / 3300C03H-50 500 / 19.69 930 / 36.61 850 / 33.46 95 / 0.12 4 165 / 363 1500 / 3300

Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, cylinder protection (starting at the width of 350mm/13.78in), non-return valve and hose guard



KM 04 F 84 x 30 / 3.31 x 1.18 850 /625 3000 / 2215

Accessories

Type Description

KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW01 cardanic adapter for Lehnhoff grab exchange system SW/MS01 without suspension – up to 2t / 4400 lbsSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbs




Technical Drawings

E

Cm

ax

A


Clamshell Buckets with HPXdrive

C08HPX

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C05HPX

C08HPX

C05HPX / C08HPX

Clamshell Bucket C05HPX Type Width E Opening A Height C max. Volume Number Self weight Load capacity Operating

(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs) weight (t/lbs)C05HPX-40 400 / 15.75 1110 / 43.70 880 / 34.65 115 / 0.15 4 270 / 594 3000 / 6600 3-6 / 6600-13200C05HPX-45 450 / 17.72 1110 / 43.70 880 / 34.65 130 / 0.17 4 285 / 627 3000 / 6600 3-6 / 6600-13200C05HPX-50 500 / 19.69 1110 / 43.70 880 / 34.65 140 / 0.18 4 290 / 638 3000 / 6600 3-6 / 6600-13200C05HPX-60 600 / 23.62 1110 / 43.70 880 / 34.65 170 / 0.22 6 305 / 671 3000 / 6600 3-6 / 6600-13200C05HPX-80 800 / 31.50 1110 / 43.70 880 / 34.65 230 / 0.30 6 330 / 726 3000 / 6600 3-6 / 6600-13200

Clamshell Bucket C08HPX Type Width E Opening A Height C max. Volume Number Self weight Load capacity Operating

(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs) weight (t)C08HPX-40 400 / 15.75 1250 / 49.21 960 / 37.80 145 / 0.19 4 280 / 616 3000 / 6600 5-9 / 11000-19800 C08HPX-45 450 / 17.72 1250 / 49.21 960 / 37.80 160 / 0.21 4 295 / 649 3000 / 6600 5-9 / 11000-19800 C08HPX-50 500 / 19.69 1250 / 49.21 960 / 37.80 180 / 0.24 4 300 / 660 3000 / 6600 5-9 / 11000-19800 C08HPX-60 600 / 23.62 1250 / 49.21 960 / 37.80 220 / 0.29 6 320 / 704 3000 / 6600 5-9 / 11000-19800 C08HPX-80 800 / 31.50 1250 / 49.21 960 / 37.80 300 / 0.39 6 340 / 748 3000 / 6600 5-9 / 11000-19800 Package C05/C08HPX: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guardPlease note: exchangeable shells for special applications on request

KINSHOFER RotatorsIntegrated in a single unit with the HPXdrive, no more connecting hoses. Continous rotation. Overload protection ensured by pressure relief valves.Type Upper connection Torque Moment of deflection


C05HPX: KM 04 F140-30VE 84 x 30 / 3.31 x 1.18 850 / 625 3000 / 2215C08HPX: KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270

Accessories Type DescriptionKM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbsSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs

adapter for quick exchange systems from other manufacturers availableKM 680 5t-8t scraperKM 685 06 hook set 2 welded hooks (2 pcs.)KM 685 07 set wear plates to protect horizontal cutting edgesKM 685 08 extension for excavating e.g. trenches – 450 mm / 17.72 in (30 kg / 66 lbs)

Requirements of ExcavatorC05HPX C08HPX

Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psi, internal pressure 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): 40 - max. 75 l/min / 10.57 - max. 19.82 GPM 40 - max. 75 l/min / 10.57 - max. 19.82 GPMOperating pressure (open/close): max. 32 MPa (320 bar) / 4608 psi max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM 15 - max. 50 l/min / 3.96 - max. 13.21 GPM

Technical Drawings

Universal clamshell bucket with the HPXdrive for compact excavators from 3t / 6600 lbs to 9t / 19800 lbs operating weight – maintenance free!

l HPXdrive – the revolutionary concept for hydraulically operated grabs! The rotation of the arms of the grab is generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No hydraulic cylinder required!

l 50% longer life cycle. The drive unit runs in a permanent oil bath – no lubrication necessary. Resistant against dirt and blows due to the compact design.

l Constant closing forces during the entire digging process (C05: 25 kN/5500 lbf / C08: 22 kN/4840 lbf at an internal operating pressure of 26 MPa / 3744 psi).

l Different applications possible through easy exchange system.l Long life is ensured due to the use of 500 HB steel in the manufacture

of cutting edges.

option welded hooks

A E

Cm

ax

A

Cm

ax

E


Clamshell Bucket

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C05HRobust clamshell bucket in compact form for mini and compact excavators from 3t / 6600 lbs to 6t / 13200 lbs operating weight.


l Reduced wear resulting from generously dimensioned bearing system. l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces

(21 kN / 4620 lbf at an operating pressure of 26 MPa / 3744 psi).l Cylinder protection included (starting at width 350 mm / 13.78 in).


Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)

C05H-25 250 / 9.84 1090 / 42.91 930 / 36.61 70 / 0.09 3 140 / 308 2000 / 4400C05H-30 300 / 11.81 1090 / 42.91 930 / 36.61 85 / 0.11 3 150 / 330 2000 / 4400C05H-35 350 / 13.78 1090 / 42.91 930 / 36.61 100 / 0.13 4 160 / 352 2000 / 4400C05H-40 400 / 15.75 1090 / 42.91 930 / 36.61 115 / 0.15 4 165 / 363 2000 / 4400C05H-45 450 / 17.72 1090 / 42.91 930 / 36.61 130 / 0.17 4 170 / 374 2000 / 4400C05H-50 500 / 19.69 1090 / 42.91 930 / 36.61 140 / 0.18 4 180 / 396 2000 / 4400C05H-60 600 / 23.62 880 / 34.65 825 / 32.48 115 / 0.15 5 175 / 385 2000 / 4400

Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, cylinder protection (starting at the width of 350mm), non-return valve and hose guard



KM 04 F 84 x 30 / 3.31 x 1.18 850 / 625 3000 / 2215

Accessories

Type Description

KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbs




Technical Drawings

A

C m

ax

E


Clamshell Bucket

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C08HRobust clamshell bucket for every day operation for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight.


l Reduced wear resulting from generously dimensioned bearing system.l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces –

21 kN / 4620 lbf at an operating pressure of 26 MPa / 3744 psi (26 kN / 5720 lbf at an operating pressure of 32 MPa / 4608 psi).


Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)

C08H-32 325 / 12.80 1260 / 49.61 1060 / 41.73 115 / 0.15 3 240 / 528 3000 / 6600C08H-40 400 / 15.75 1260 / 49.61 1060 / 41.73 145 / 0.19 3 260 / 572 3000 / 6600C08H-50 500 / 19.69 1260 / 49.61 1060 / 41.73 185 / 0.24 5 280 / 616 3000 / 6600C08H-60 600 / 23.62 1260 / 49.61 1060 / 41.73 220 / 0.29 5 295 / 649 3000 / 6600C08H-80 800 / 31.50 1260 / 49.61 1060 / 41.73 300 / 0.39 9 330 / 726 3000 / 6600Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard



KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270

Accessories

Type Description





Technical Drawings

C m

ax

A E

30 84


Clamshell Bucket with Vertical Cylinder

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C08VClamshell bucket with vertical cylinder for earthwork and trenches for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight – ideal for foundations and cable trenches.


l Durable as the hydraulic cylinder is fully enclosed in a hub unit, short hydraulic connecting hoses.

l Reduced wear resulting from generously dimensioned bearing system. l Excellent digging characteristics are the result of high closing forces

21 kN / 4620 lbf at an operating pressure of 26 MPa / 3744 psi (26 kN / 5720 lbf at an operating pressure of 32 MPa / 4608 psi).

––––> Alternatively to the C08V the C08HPX can be used with an extension for excavating.

Clamshell Bucket C08V

Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)

C08V-32 325 / 12.80 1260 / 49.61 1290 / 50.79 115 / 0.15 3 305 / 671 3000 / 6600C08V-40 400 / 15.75 1260 / 49.61 1290 / 50.79 145 / 0.19 3 325 / 715 3000 / 6600C08V-50 500 / 19.69 1260 / 49.61 1290 / 50.79 185 / 0.24 5 345 / 759 3000 / 6600C08V-60 600 / 23.62 1260 / 49.61 1290 / 50.79 220 / 0.29 5 365 / 803 3000 / 6600C08V-80 800 / 31.50 1260 / 49.61 1290 / 50.79 300 / 0.39 9 400 / 880 3000 / 6600Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard



KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270

Accessories

Type Description





Technical Drawings

A E

C m

ax

1170


1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C08FClamshell bucket with vertical cylinder for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight – specially constructed for excavating foundations and graves.

l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.l Durable as the hydraulic cylinder is fully enclosed in a hub unit, short hydraulic

connecting hoses.l Reduced wear resulting from generously dimensioned bearing system.l Excellent digging characteristics are the result of high closing forces

(24 kN / 5280 lbf to 34 kN / 7480 lbf at an opening pressure of 26 MPa / 3744 lbf ).l Scraper is standard.

Clamshell Bucket C08F

Type Width Opening Height Volume Number Self Load capacity

Closing forceE A C max. of teeth weight

(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf )C08F-100 600 / 23.62 830 / 32.68 1220 / 48.03 100 / 0.13 5 320 / 704 3000 / 6600 34 / 7480C08F-125 760 / 29.92 830 / 32.68 1220 / 48.03 125 / 0.16 7 355 / 781 3000 / 6600 34 / 7480C08F-150 600 / 23.62 1050 / 41.34 1325 / 52.17 150 / 0.20 5 315 / 693 3000 / 6600 29 / 6380C08F-190 760 / 29.92 1050 / 41.34 1325 / 52.17 190 / 0.25 7 340 / 748 3000 / 6600 29 / 6380C08F-200 600 / 23.62 1200 / 47.24 1425 / 56.10 200 / 0.26 5 335 / 737 3000 / 6600 24 / 5280Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve, hose guard and scraper



KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270

Accessories

Type Description


adapter for quick exchange systems from other manufacturers available



Technical Drawings

EA

C m

axClamshell Bucket with Vertical Cylinder


Clamshell Bucket with Exchangeable Shells

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

Clamshell Bucket C08VEType Width E Opening A* Height C max.* Height C min.* Volume Number Self weight Load capacity

(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)C08VE-32 325 / 12.80 1330 / 52.36 1520 / 59.84 1380 / 54.33 115 / 0.15 3 330 / 726 3000 / 6600C08VE-40 400 / 15.75 1330 / 52.36 1520 / 59.84 1380 / 54.33 145 / 0.19 3 335 / 737 3000 / 6600C08VE-50 500 / 19.69 1330 / 52.36 1520 / 59.84 1380 / 54.33 185 / 0.24 5 345 / 759 3000 / 6600C08VE-60 600 / 23.62 1330 / 52.36 1520 / 59.84 1380 / 54.33 220 / 0.29 5 355 / 781 3000 / 6600C08VE-80 800 / 31.50 1330 / 52.36 1520 / 59.84 1380 / 54.33 300 / 0.39 9 390 /858 3000 / 6600Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard * incl. teethExchangeable Shells C08VE-SType Width E Volume Number of Self weight Load capacity

(mm/in) (litre/c.y.) teeth (kg/lbs) (kg)C08VE-32S 325 / 12.80 115 / 0.15 3 130 / 286 3000 / 6600C08VE-40S 400 / 15.75 145 / 0.19 3 135 / 297 3000 / 6600C08VE-50S 500 / 19.69 185 / 0.24 5 145 / 319 3000 / 6600C08VE-60S 600 / 23.62 220 / 0.29 5 155 / 341 3000 / 6600C08VE-80S 800 / 31.50 300 / 0.39 9 190 / 418 3000 / 6600Please note: exchangeable shells for special applications on requestKINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection


KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270

AccessoriesType Description

KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbsSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbsKM 680 5t-8t scraperRequirements of Excavator


Technical Drawings

C08VE

Rock Grab

Pipe Grab

Timber Grab

Clamshell Bucket

Multi Purpose Grab

Well Shaft Grab

Operating Module

Clamshell Bucket with exchangeable shells and vertical cylinder for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight – through quick and easy exchange of shells ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs etc. The shells can be changed in less than four minutes.

l Economic solution as only the shells have to be exchanged for another application – bucket carrier, hydraulic cylinder and bearings are integrated into the unit.




EA

C m

ax

C m

in


Clamshell Bucket

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C10H

Clamshell Bucket C10HType Width E Opening A Height C max. Volume Number of Self weight Load capacity

(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) teeth (kg/lbs) (kg/lbs)C10H-40 400 / 15.75 1425 / 56.10 1150 / 45.28 170 / 0.22 3 285 / 627 3000 / 6600C10H-50 500 / 19.69 1425 / 56.10 1150 / 45.28 220 / 0.29 5 305 / 671 3000 / 6600C10H-65 650 / 25.59 1425 / 56.10 1150 / 45.28 290 / 0.38 5 320 / 704 3000 / 6600C10H-80 800 / 31.50 1425 / 56.10 1150 / 45.28 355 / 0.46 9 345 / 759 3000 / 6600C10H-100 1000 / 39.37 1425 / 56.10 1150 / 45.28 450 / 0.59 9 375 / 825 3000 / 6600C10H-120 1200 / 47.24 1425 / 56.10 1150 / 45.28 540 / 0.71 9 400 / 880 3000 / 6600

Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard

KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.

Type Upper connection Torque Moment of deflection(width x pin-Ø) max.

(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 06 F140-40 84 x 40 / 3.31 x 1.57 1000 / 740 8500 / 6270


KM 501 6t-12t upper suspension without pendulum damperKM 511 6t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs


Requirements of ExcavatorOperating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 40 - max. 120 l/min / 10.57 - max. 31.70 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM

Technical Drawings

Robust clamshell bucket for excavators up to 10t / 22000 lbs operating weight.


l Reduced wear resulting from generously dimensioned bearing system.

l Maximum loading height is achieved through the compact design.

l Excellent digging characteristics are the result of high closing forces (37 kN / 8140 lbf at an operating pressure of 32 MPa / 4608 psi).

Cm

ax

EA


Clamshell Bucket

1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C12H


Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)

C12H-40 400 / 15.75 1485 / 58.46 1250 / 49.21 170 / 0.22 3 345 / 759 3000 / 6600C12H-50 500 / 19.69 1485 / 58.46 1250 / 49.21 220 / 0.29 5 370 / 814 3000 / 6600C12H-65 650 / 25.59 1485 / 58.46 1250 / 49.21 290 / 0.38 5 390 / 858 3000 / 6600C12H-80 800 / 31.50 1485 / 58.46 1250 / 49.21 355 / 0.46 9 425 / 935 3000 / 6600C12H-100 1000 / 39.37 1485 / 58.46 1250 / 49.21 450 / 0.59 9 455 / 1001 3000 / 6600

Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard




Accessories

Type Description





Technical Drawings

Robust clamshell bucket for excavators from 9t / 19800 lbs to 12t / 26400 lbs operating weight.


l Reduced wear resulting from generously dimensioned bearing system.

l Maximum loading height is achieved through the compact design.


A

Cmax

E


1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

C12VEClamshell Bucket with exchangeable shells and vertical cylinders for excavators from 9t / 19800 lbs to 12t / 26400 lbs operating weight – through quick and easy exchange of shells, the C12VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs and more. The shells can be changed in less than four minutes.

l Economic solution as only the shells have to be exchanged to switch applications – bucket carrier, hydraulics and bearings are integrated into the main carrier.




Clamshell Bucket C12VE

Type Width E Opening A* Height C max.* Length F Volume Number Self weight Load capacity(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)

C12VE-32 325 / 12.80 1645 / 64.76 1570 / 61.81 1350 / 53.15 125 / 0.16 3 475 / 1045 4500 / 9900C12VE-40 400 / 15.75 1645 / 64.76 1570 / 61.81 1350 / 53.15 160 / 0.21 3 485 / 1067 4500 / 9900C12VE-50 500 / 19.69 1645 / 64.76 1570 / 61.81 1350 / 53.15 200 / 0.26 5 500 / 1100 4500 / 9900C12VE-60 600 / 23.62 1645 / 64.76 1570 / 61.81 1350 / 53.15 245 / 0.32 5 515 / 1133 4500 / 9900C12VE-70 700 / 27.56 1645 / 64.76 1570 / 61.81 1350 / 53.15 285 / 0.37 7 525 / 1155 4500 / 9900C12VE-80 800 / 31.50 1645 / 64.76 1570 / 61.81 1350 / 53.15 330 / 0.43 9 535 / 1177 4500 / 9900

Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes * incl. teeth




Accessories

Type Description


adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper



Technical Drawings


Railroad Grapple

Clamshell Bucket

Multi-Purpose Grapple

Rock Grapple

Logging Grapple

Operating Module C12VE

Clamshell Bucket

Pipe Grapple

Well Shaft Grapple

Excavating GrappleF EA

C m

ax


1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t

Exchangeable ShellsC12VEExchangeable Shells for C12VE

Shells are interchangeable and available in all widths. Rapid exchange with shell stand and pin exchange tool

Type Width Opening Height Volume Number Weight Self Load Closingoverall of teeth of shells weight capacity force

(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kg/lbs) (kN/lbf )Clamshell Bucket

C12VE-32S 325 / 12.80 1535 / 60.43 1570 / 61.81 125 / 0.16 3 130 / 286 480 / 1056 4500 / 9900 39 / 8580C12VE-40S 400 / 15.75 1535 / 60.43 1570 / 61.81 160 / 0.21 3 140 / 308 495 / 1089 4500 / 9900 39 / 8580C12VE-50S 500 / 19.69 1535 / 60.43 1570 / 61.81 200 / 0.26 5 165 / 363 515 / 1133 4500 / 9900 39 / 8580C12VE-60S 600 / 23.62 1535 / 60.43 1570 / 61.81 245 / 0.32 5 180 / 396 530 / 1166 4500 / 9900 39 / 8580C12VE-70S 700 / 27.56 1535 / 60.43 1570 / 61.81 285 / 0.37 7 205 / 451 555 / 1221 4500 / 9900 39 / 8580C12VE-80S 800 / 31.50 1535 / 60.43 1570 / 61.81 330 / 0.43 9 225 / 495 575 / 1265 4500 / 9900 39 / 8580

Excavating Grab

C12VE-32S EG 325 / 12.80 1200 / 47.24 1350 / 53.15 90 / 0.12 3 110 / 242 450 / 990 4500 / 9900 52 / 11440C12VE-40S EG 400 / 15.75 1100 / 43.31 1355 / 53.35 55 / 0.07 3 125 / 275 475 / 1045 4500 / 9900 55 / 12100C12VE-80S EG 800 / 31.50 800 / 31.50 1350 / 53.15 100 / 0.13 9 155 / 341 505 / 1111 4500 / 9900 63 / 13860

Pipe Grab

C12VE-80S PG 800 / 31.50

Ø75-560 / 2.95-22.05

1590 / 62.60 - - 145 /

319485 / 1067

4500 / 9900

39 / 8580

Well Shaft Grab

C12VE-100S WSG Ø1000 / 39.37 1000 / 39.37 1320 / 51.97 100 / 0.13 5 140 / 308 480 / 1056 4500 / 9900 60 / 13200Anmerkung: Grössere Schalen on request lieferbar

Multi Purpose Grab

A12VE-94S 940 / 37.01 1850 / 72.83 1695 / 66.73 400 / 0.52 - 205 / 451 550 / 1210 4500 / 9900 39 / 8580A12VE-122S 1220 / 48.03 1850 / 72.83 1695 / 66.73 600 / 0.78 - 240 / 528 595 / 1309 4500 / 9900 39 / 8580

Rock Grab

R12VE-48S 480 / 18.90

1850 / 72.83

1790 / 70.47

0,50 m2/ 0.33 cords - 200 /

440555 / 1221

4500 / 9900

30 / 6600

Timber Grab

T12VE-47S 470 / 18.50

1835 / 72.24

1795 / 70.67

0,50 m2/ 0.33 cords - 180 /

396535 / 1177

4500 / 9900

30 / 6600

Railroad Grab

C12VE-50S RG 500 / 19.69 1350 / 53.15 1405 / 55.31 - - 135 / 297 485 / 1067 4500 / 9900 44 / 9680

Package consists of: exchangeable buckets, shell stand and pin exchange tool

Please note: special buckets are availabe on request


12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t


Railroad Grapple

Clamshell Bucket

Multi-Purpose Grapple

Rock Grapple

Logging Grapple

Operating Module C18VE

Clamshell Bucket

Pipe Grapple

Well Shaft Grapple

Excavating Grapple

Clamshell Bucket with exchangeable shells and vertical cylinders for excavators up to 18t / 39600 lbs operating weight – through quick and easy exchange of shells, the C18VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs etc. The shells can be changed in less than four minutes.

l An economic solution as only the shells have to be exchanged to suit application – bucket carrier, hydraulics and bearings are integrated into the main carrier.


l Reduced wear resulting from generously dimensioned bearing system with special coating.


C18VE

Clamshell Bucket C18VE

Type Width E Opening A* Height C max.* Length Volume Number Self weight Load capacity(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)

C18VE-33 335 / 13.19 1650 / 64.96 1595 / 62.80 1360 / 53.54 125 / 0.16 3 590 / 1298 4500 / 9900C18VE-40 400 / 15.75 1650 / 64.96 1595 / 62.80 1360 / 53.54 160 / 0.21 3 605 / 1331 4500 / 9900C18VE-50 500 / 19.69 1650 / 64.96 1595 / 62.80 1360 / 53.54 200 / 0.26 5 630 / 1386 4500 / 9900C18VE-60 600 / 23.62 1650 / 64.96 1595 / 62.80 1360 / 53.54 245 / 0.32 5 655 / 1441 4500 / 9900C18VE-80 800 / 31.50 1650 / 64.96 1595 / 62.80 1360 / 53.54 330 / 0.43 9 705 / 1551 4500 / 9900C18VE-100 1000 / 39.37 1650 / 64.96 1595 / 62.80 1360 / 53.54 415 / 0.54 9 755 / 1661 4500 / 9900

Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes * incl. teeth



(mm/in) (Nm / ft.lbs) (Nm / ft.lbs)KM 10 F275-60 125 x 60 / 4.92 - 2.36 1500 / 1105 14000 / 10325

Accessories

Type Description


adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper



Technical Drawings

A E

C m

ax



Exchangeable ShellsC18VEExchangeable Shells for C18VE

Shells are interchangeable and available in all widths. Rapid exchange with exchanging support and extraction tool.

Type Width Opening Height Volume Number Weight Self Load Closingoverall of teeth of shells weight capacity force

(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kg/lbs) (kN/lbf )Clamshell Bucket

C18VE-33S 335 / 13.19 1535 / 60.43 1595 / 62.80 125 / 0.16 3 160 / 352 545 / 1199 4500 / 9900 42 / 9240C18VE-40S 400 / 15.75 1535 / 60.43 1595 / 62.80 160 / 0.21 3 180 / 396 565 / 1243 4500 / 9900 42 / 9240C18VE-50S 500 / 19.69 1535 / 60.43 1595 / 62.80 200 / 0.26 5 195 / 429 580 / 1276 4500 / 9900 42 / 9240C18VE-60S 600 / 23.62 1535 / 60.43 1595 / 62.80 245 / 0.32 5 225 / 495 610 / 1342 4500 / 9900 42 / 9240C18VE-80S 800 / 31.50 1535 / 60.43 1595 / 62.80 330 / 0.43 9 275 / 605 660 / 1452 4500 / 9900 42 / 9240C18VE-100S 1000 / 39.37 1535 / 60.43 1595 / 62.80 415 / 0.54 9 325 / 715 710 / 1562 4500 / 9900 42 / 9240

Excavating Grab

C18VE-33S EG 335 / 13.19 1205 / 47.44 1430 / 56.30 90 / 0.12 3 125 / 275 510 / 1122 4500 / 9900 57 / 12540C18VE-40S EG 400 / 15.75 1120 / 44.09 1385 / 54.53 55 / 0.07 3 130 / 407 515 / 1133 4500 / 9900 60 / 13200C18VE-80S EG 800 / 31.50 820 / 32.28 1380 / 54.33 100 / 0.13 9 185 / 407 570 / 1254 4500 / 9900 69 / 15180

Pipe Grab

C18VE-83S PG 830 / 32.68 Ø100 - 600 / 3.94-23.62 1625 / 63.98 - - 295 / 649* 680 / 1496* 4500 / 9900 41 / 9020

* : incl. supportWell Shaft Grab

C18VE-97S WSG Ø 970 / 38.19 970 / 38.19 1410 / 55.51 110 / 0.14 5 170 / 374 555 / 1221 4500 / 9900 65 / 14300Please note: larger grabs are available on request

Multi Purpose Grab

A18VE-95S 955 / 37.60 1830 / 72.05 1685 / 66.34 400 / 0.52 - 340 / 748 725 / 1595 4500 / 9900 41 / 9020A18VE-122S 1220 / 48.03 1835 / 72.24 1725 / 67.91 600 / 0.78 - 275 / 605 660 / 1452 4500 / 9900 32 / 7040

Rock Grab

R18VE-49S 490 / 19.29 1850 / 72.83 1820 / 71.65 0,50 m2/ 0.33 cords - 195 / 429 580 / 1276 4500 / 9900 33 / 7260

Timber Grab

T18VE-49S-0,5 490 / 19.29 1830 / 72.05 1825 / 71.85 0,50 m2 / 0.33 cords - 200 / 440 585 / 1287 4500 / 9900 30 / 6600

T18VE-49S-0,6 490 / 19.29 1975 / 77.76 1905 / 75.00 0,60 m2 / 0.40 cords - 220 / 484 605 / 1331 4500 / 9900 33 / 7260

Railroad Grab

C18VE-50S RG 500 / 19.69 1250 / 49.21 1400 / 55.12 - - 130 / 286 515 / 1133 4500 / 9900 44 / 9680

Package consists of: exchangeable buckets, shell stand and pin exchange tool

Please note: special buckets are availabe on request



Clamshell Bucket with Exchangeable ShellsClamshell bucket with exchangeable shells and two vertical cylinders for excavators up to 25t / 55000 lbs operating weight. The shells can be changed in less than four minutes.

l An economic solution as only the shells have to be exchanged to suit application – bucket carrier, hydraulics and bearings are integrated in the unit.l Long life is ensured due to the use of 500 HB in the manufacture of cutting edges.l Reduced wear resulting from generously dimensioned bearing system with special coating.l Excellent digging characteristics are the result of high closing forces (60 kN / 13200 lbf at an operating pressure of 35 MPa / 5040 psi).

C25VE

Clamshell Bucket C25VEType Width E Opening A Height C max. Length F Volume Number Self weight Load capacity

(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)C25VE-42 425 / 16.73 2015 / 79.33 1595 / 62.80 1360 / 53.54 210 / 0.27 3 1080 / 2376 6000 / 13200C25VE-50 500 / 19.69 2015 / 79.33 1595 / 62.80 1360 / 53.54 250 / 0.33 4 1115 / 2453 6000 / 13200C25VE-60 600 / 23.62 2015 / 79.33 1595 / 62.80 1360 / 53.54 305 / 0.40 5 1150 / 2530 6000 / 13200C25VE-80 800 / 31.50 2015 / 79.33 1595 / 62.80 1360 / 53.54 410 / 0.54 7 1220 / 2684 6000 / 13200C25VE-100 1000 / 39.37 2015 / 79.33 1595 / 62.80 1360 / 53.54 520 / 0.68 7 1290 / 2838 6000 / 13200C25VE-120 1200 / 47.24 2015 / 79.33 1595 / 62.80 1360 / 53.54 625 / 0.82 9 1360 / 2992 6000 / 13200Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes * incl. teeth

Exchangeable Shells C25VE-SType Width E Volume Number of Self weight Load capacity

(mm/in) (litre) teeth (kg/lbs) (kg/lbs)C25VE-42S 425 / 16.73 210 / 0.27 3 370 / 814 6000 / 13200C25VE-50S 500 / 19.69 250 / 0.33 4 405 / 891 6000 / 13200C25VE-60S 600 / 23.62 305 / 0.40 5 440 / 968 6000 / 13200C25VE-80S 800 / 31.50 410 / 0.54 7 510 / 1122 6000 / 13200C25VE-100S 1000 / 39.37 520 / 0.68 7 580 / 1276 6000 / 13200C25VE-120S 1200 / 47.24 625 / 0.82 9 650 / 1430 6000 / 13200Please note: exchangeable shells for special applications



KM 15 F340/220 180 x 70 / 7.09 x 2.76 3000 / 2215 25000 / 18435

AccessoriesType DescriptionKM 501 19t-60t upper suspension without pendulum damperKM 511 19t-60t upper suspension with pendulum damperSW21 cardanic adapter for Lehnhoff grab exchange system SW/MS21 – up to 28t / 61600 lbs

adapter for quick exchange systems from other manufacturers availableKM 680 C25VE scraper

Requirements of Excavator Technical DrawingsOperating pressure (open/close): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 75 l/min / 5.28 - max. 19.82 GPM

Rock Grab

Pipe Grab

Timber Grab

Clamshell Bucket

Multi Purpose Grab

Well Shaft Grab

Operating Module


8 t 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t

Multi Purpose GrabsA12H / A15H / A20H / A27HRobust multi purpose grab for excavators up to 12t / 26400 lbs, 15t / 33000 lbs, 20t / 44000 lbs or 27t / 59400 lbs operating weight - ideal for landscaping architecture.

l Efficient tool for the exact positioning of natural rocks and for the handling of filling material – without additional set-up times.

l The sophisticated ergonomics and the design of the shells enables loading, sorting, digging and demolition operations with maximum efficiency.

l Rigid mounting at the tilting joint of the bucket cylinder of the excavator guarantees precise positioning.

l The grab requires three hydraulic functions including the bucket cylinder.l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting

edges.l From A15H: robust, fully integrated rotation with sturdy slewing ring to withstand

external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge. A12H: KM 15 F273/273.

Multi Purpose Grabs A12H / A15H / A20H / A27HType Width Opening Height Gripping Volume Number Self

weightLoad

capacityClosing

forceTorque Operating

E A C max. range D min. of teeth weight(mm/in) (mm/in) (mm/in) � (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf ) (Nm) (t/lbs)

A12H-60 600 / 23.62

1870 /73.62

1350 / 53.15 605 / 23.82 260 / 0.34 5 550 / 1210 3000 /

66000 30 / 6600 2000 / 1475

8-12 /17600-26400

A15H-60 600 / 23.62

1880 / 74.02

1410 / 55.51 610 / 24.02 300 / 0.39 5 690 / 1518 4000 /

8800 27 / 5940 3000 / 2215

11-15 /24200-33000

A20H-70 700 / 27.56

2000 / 78.74

1430 / 56.30 550 / 21.65 400 / 0.52 7 1035 / 2277 5000 /

11000 40 / 8800 4000 / 2950

14-20 / 30800-44000

A27H-80 800 / 31.50

2100 / 82.68

1685 / 66.34 515 / 20.28 500 / 0.65 5 1500 / 3300 6000 /

13200 63 / 13860 5000 / 3687

18-27 /39600-59400

Package consists of: multi purpose grab, bolt-on teeth, integrated rotation with sturdy slewing ring (A12H: rotator KM 15 F273/273), non-return valve


KM 691 15t adapter connection plate for specific solutions – up to 15t / 33000 lbsKM 691 20t adapter connection plate for specific solutions – up to 20t / 44000 lbsKM 691 27t adapter connection plate for specific solutions – up to 27t / 59400 lbsKM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ60 bolt-on-adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbsOQ65 bolt-on-adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on-adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on-adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS21 for rigid mounting – up to 28t / 61600 lbs


Requirements of ExcavatorOperating pressure (open/close): A12 - A20: max. 32 Mpa (320 bar) / 4608 psi; A27: max. 35 Mpa (350 bar) / 5040 psiRecommended oil flow (open/close): A12 - A27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): A12 - A20: G 3/4“ / G 1/2“; A27: G 1“ / G 1/2“Operating pressure (rotation): A12: max. 32 MPa (320 bar) / 4608 psi; A15 - A27: max. 17 MPa (170 bar) / 2448 psi Recommended oil flow (rotation): A12: 20 - max. 50 l/min / 5.28 - max. 13.21 GPM; A15 - A27: 25 - max. 60 l/min / 6.61 - max.15.85 GPM

Technical Drawings


8 t 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t

Demolition and Sorting Grabs D15H to D27H / D12H-P to D27H-P

D27H-P

Robust multi purpose grab for excavators up to 12t / 26400 lbs, 15t / 33000 lbs, 20t / 44000 lbs or 27t / 59400 lbs operating weight – ideal for demolition and segmentation of all kinds of building materials. Ideal for separating building debris and similar material.

l The grab is available with ribs or a perforated skin – both versions let fine dust and gravel through. The durable cutting edges can retain different materials, using the edge tips.l Long life is ensured due to the use of 500 HB steel in the manufacture of

replaceable cutting edges.l From D15H/D15H-P: robust, fully integrated rotation with sturdy slewing ring to withstand external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge. D12H-P: KM 15 F273/273.l Exceptional closing forces through two horizontally positioned hydraulic

cylinders that are protected by the bucket carrier.l Cylinders are hydraulically cushioned.

Demolition and Sorting Grabs with metal ribs D15H / D20H / D27HType Width Opening Height Height Volume Weight Load

capacityClosing Torque Operating

weightE A C max. C min. force(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf ) (Nm/ft.lbs) (t)

D15H-80 800 / 31.50

1540 / 60.63

1210 / 47.64

1070 / 42.13 300 / 0.39 655 / 1441 4000 /

8800 36 / 7920 3000 / 2215

11-15 / 24200-33000

D20H-100 1000 / 39.37

1925 / 75.79

1450 / 57.09

1235 / 48.62 450 / 0.59 1050 / 2310 5000 /

11000 42 / 9240 4000 / 2950

14-20 / 30800-44000

D27H-115 1150 / 45.28

2140 / 84.25

1615 / 63.58

1410 / 55.51 800 / 1.05 1585 / 3487 6000 /

13200 63 / 13860 5000 / 3690

20-27 / 44000-59400

Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valveDemolition and Sorting Grabs with perforated shells D12H-P / D15H-P / D20H-P / D27H-PType Width Opening Height Height Volume Weight Load

capacityClosing Torque Operating

weightE A C max. C min. force(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf ) (Nm/ft.lbs) (t)

D12H-P-60 600 / 23.62

1550 / 61.02

1125 / 44.29

980 / 38.58 225 / 0.29 470 / 1034 3000 /

6600 36 / 7920 3000 / 2215

8-12 / 17600-26400

D15H-P-80 800 / 31.50

1540 / 60.63

1210 / 47.64

1070 / 42.13 300 / 0.39 650 / 1430 4000 /

8800 36 / 7920 3000 / 2215

11-15 / 24200-33000

D20H-P-100 1000 / 39.37

1925 / 75.79

1450 / 57.09

1235 / 48.62 450 / 0.59 1020 / 2244 5000 /

11000 42 / 9240 4000 / 2950

14-20 / 30800-44000

D27H-P-115 1150 / 45.28

2140 / 84.25

1615 / 63.58

1410 / 55.51 800 / 1.05 1485 / 3267 6000 /

13200 63 / 13860 5000 / 3690

20-27 / 44000-59400

Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring (D12H-P: rotator KM 15 F273/273), cutting edges andnon-return valve

Accessories Type DescriptionKM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ60 bolt-on adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbsOQ65 bolt-on-adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on-adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on-adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS21 for rigid mounting – up to 28t / 61600 lbs

adapter for quick exchange systems from other manufacturers availableKM 685 09 E bolt on side platesKM 685 10 retrofitted plate to close backside for handling of small material

D12H-P with perforated

shells

D27H with metal ribs

Requirements of ExcavatorOperating pressure (open/close): D12 - D20: max. 32 Mpa (320 bar) / 4608 psi; D27: max. 35 Mpa (350 bar) / 5040 psiRecommended oil flow (open/close): D12 - D27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): D12 - D20: G 3/4“ / G 1/2“; D27: G 1“ / G 1/2“

Operating pressure (rotation): D12: max. 20 MPa (200 bar) / 2880 psi; D15: max. 15 MPa (150 bar) / 2160 psi D20 - D27: max. 17 MPa (170 bar) / 2448 psi

Recommended oil flow (rotation): D12 - D27: 20 - max. 50 l/min / 5.28 - max. 13.21 GPM

Technical Drawings


Heavy Duty Demolition and Sorting Grabs

10 t 20 t … …27 t …35t …40 t 50 t 60 t… 70 t……

D15H-P HD to D32H-P HD

Demolition and Sorting Grabs with perforated shells D15H-P -75HD up to D32H-P110HDType Width E Opening A Height C Volume Weight Load capacity Closing Torque Operating

(mm/in) (mm/in) max. (mm/in) (litre/c.y.) (kg/lbs) (kg) force (kN/lbf ) (Nm/ft.lbs) weight (t)

D15H-P-75HD 750 / 29.53

1730 / 68.11

1295 / 50.98

340 / 0.44

860 / 1892

5000 / 11000

43 / 9460

3000 / 2215

10-18 / 22000-39600

D16H-P-90HD 900 / 35.43

1730 / 68.11

1295 / 50.98

415 / 0.54

900 / 1980

5500 / 12100

43 / 9460

3000 / 2215

12-20 / 26400-44000

D19H-P-85HD 850 / 33.46

1725 / 67.91

1320 / 51.96

365 / 0.48

1030 / 2266

6500 / 14300

50 / 11000

3000/5700 / 2215/4205*

12-24 / 26400-52800

D20H-P-100HD 1000 / 39.37

1865 / 73.43

1400 / 55.11

460 / 0.60

1120 / 2464

7000 / 15400

50 / 11000

3000/5700 / 2215/4205*

13-25 / 28600-55000

D24H-P-100HD 1000 / 39.37

1970 / 77.56

1455 / 57.28

570 / 0.75

1315 / 2893

8000 / 17600

56 / 12320

3000/5700 / 2215/4205*

15-30 / 33000-66000

D32H-P-110HD 1100 / 43.34

2190 / 86.22

1565 / 61.61

825 / 1.08

1820 / 4004

10500 / 23100

70 / 15400

7000 / 5165**

20-40 / 44000-88000

Optional second heavy duty motor for D19H-P HD, D20H-P HD, D24H-P HD Notes: * optional with 2 motors for rotation ** second heavy duty hydraulic motor comes standardPackage consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valve

Accessories Type Description

KM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsKM 690 32t adapter for rigid mounting – up to 32t / 70400 lbsOQ bolt-on adapter for Oilquick OQ – 5t to 70t / 11000 lbs to 154000 lbsSW rigid bolt-on adapter SW for Lehnhoff quick change system MS/HS for rigid mounting – 2t up to 120t / 4400 lbs up to 264000 lbs


Robust multi purpose grab with perforated shells for excavators up to 40t / 88000 lbs operating weight. The D-HD series grabs are ideal for demolition and sorting of all kinds of building materials. l Robust Delta-box frame with dust-proof axle bearing points.l Perforated shells let fine dust and gravel through without large

pieces getting caught. l Durable and reversable cutting edges, made of Cracox Plus 450 steel can be used to pick up different materials, with their tips.l Cutting edges on D19H-P-HD series and higher can be turned three ways, reducing replacement costs.l Robust, fully integrated rotator with sturdy slewing ring to

withstand external forces, with pressure relief valve to ensure overload protection, and connecting hoses protected inside the hub.

l Exceptional closing forces achieved with a horizontally positioned hydraulic cylinder that is protected by the bucket carrier.

l Cylinder is hydraulically cushioned.D32H-P-HD

D32H-P-HD

Requirements of ExcavatorOperating pressure (open/close): D15 - D32: max. 35 MPa (350 bar) / 5040 psi

Recommended oil flow (open/close): D15 - D16: max. 80 l/min / max. 21.14 GPM; D19 - D24: max. 100 l/min / max. 26.42 GPM; D32: max. 120 l/min / max. 31.70 GPM

Hydraulic connection (grab/rotate): D15 - D24: G 3/4“ / G 1/2“; D32: G 1“- 25S / G 1/2“ Operating pressure (rotation): D15 - D32: max. 14 MPa (140 bar) / 2016 psiRecommended oil flow (rotation): D15 - D24: max. 40 l/min / max. 10.57 GPM; D32: 40 - max. 60 l/min / 10.57 - max. 15.85 GPM

Technical Drawings


2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t 13 t

Rock Grab R12H

Rock grab for excavators from 6t / 13200 lbs to 13t / 28600 lbs operating weight for positioning and handling of natural rocks.

l Economic rock grab for cardanic mounting.l Long life due to the use of 500 HB steel and exchangeable forged tooth. l Robust, fully integrated rotator that is fixed at 4 points to withstand external

forces, with a pressure relief valve to ensure overload protection and connecting hoses located inside the hub.

l Exceptional closing forces through two horizontally positioned hydraulic cylinders that are protected by the bucket carrier.

l Larger gripping volume due to widely spaced pivots.l Integrated non-return-valve guarantees secure handling of loads.

Rock Grab R12H

Type Width Opening A Height C Volume Self Load OperatingE (w/o teeth) max. weight capacity weight

(mm/in) (mm/in) (mm/in) (m2/cords) (kg/lbs) (kg/lbs) (t/lbs)R12H-0,35 480 / 18.90 1780 / 70.08 1250 / 49.21 0,35 / 0.23 365 / 803 3000 / 6600 6 - 13 / 13200 - 28600

Package consists of: rock grab, KINSHOFER rotator, hose guard and non-return valve

KINSHOFER Rotator

Type Upper connection Torque Moment of deflection(width/Ø-hole pattern) max.


Accessories

Type Description

KM 501 6t-12t upper suspension without pendulum damperKM 511 6t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 for rigid mounting – up to 12t / 26400 lbsSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbs

adapter for quick exchange systems from other manufacturers availableKM 681 800 bolt-on shells to handle loose material: width 800 mm / 31.50 in, volume 225 litre / 0.29 c.y.KM 681 1000 bolt-on shells to handle loose material: width 1000 mm / 39.37 in, volume 275 litre / 0.36 c.y.KM 682 bucket mounting stand for quick change of shells


Operating pressure (open/close): max. 32 Mpa (320 bar) / 4608 psiRecommended oil flow (open/close): 35 - max. 120 l/min / 9.25 - max. 31.70 GPMHydraulic connection (grab/rotate): G 1/2“ / M27 x 2Operating pressure (rotation): max. 32 Mpa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM

Technical Drawings

A E

90

40O 84

C m

ax



Rock Grabs

R20H

R27H

R20H / R27H

Requirements of ExcavatorR20H R27H

Operating pressure (open/close): max. 32 Mpa (320 bar) / 4608 psi max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPM 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): G 3/4“ / G 1/2“ G 3/4“ / G 1/2“ Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psi max. 17 MPa (170 bar) / 2448 psiRecommended oil flow (rotation): 25 - max. 60 l/min / 6.61 - max. 15.85 GPM 25 - max. 60 l/min / 6.61 - max. 15.85 GPM

Technical Drawings

Rock Grabs R20H / R27H

Type Width Opening Height Volume Weight Load Torque OperatingE A C max. capacity weight

(mm/in) (mm/in) (mm/in) (m2/cords) (kg/lbs) (kg/lbs) (Nm/ft.lbs) (t/lbs)R20H-0,40 720 / 28.35 1800 / 70.87 1340 / 52.76 0,40 / 0.27 1050 / 2310 5000 / 11000 4000 / 2950 14 – 20 / 30800 - 44000R27H-0,55 840 / 33.07 2040 / 80.31 1500 / 59.06 0,55 / 0.37 1500 / 3300 6000 / 13200 5000 / 3690 18 – 27 / 39600 - 59400

Package consists of: rock grab, integrated rotation with sturdy slewing ring and non-return valve

Accessories

Type Description

KM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ65 bolt-on-adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on-adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on-adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS21 for rigid mounting – up to 28t / 61600 lbsKM 501 19t-60t upper suspension without pendulum damperKM 511 19t-60t upper suspension with pendulum damperKM 693 01 adapter for cardanic mounting R20HKM 693 02 adapter for cardanic mounting R27H

Rock grab for excavators from 14t / 30800 lbs to 27t / 59400 lbs operating weight for positioning and handling of natural rocks.

l R20H and R27H are rock grabs for rigid mounting or cardanic mounting.l Long life due to the use of cutting edges made out of 500HB steel.l Robust, fully integrated rotation with sturdy slewing ring to withstand

external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge.

l Exceptional closing forces through two horizontally positioned hydraulic cylinders that are protected by the bucket carrier.

l Larger gripping volume due to widely spaced pivots.l Integrated non-return-valve guarantees secure handling of loads.l Cylinders are hydraulically cushioned.



Barrier Lifter KM 932MBThe KM 932MB barrier lifter is a mechanical grab for fast and convenient handling of concrete barriers and blocks.

l Safe: Carbide gripping pads ensure safe operation, even on wet or coated surfaces.

l Efficient: The fully integrated, mechanically operated “latch & release” system allows the unit to function independently, without assistance from an additional operative.

l Versatile: Multi-position arms are a standard feature. This means one unit can achieve different gripping ranges by simply changing the position of four pins.

l Cost-effective: The elimination of slings and chains means more cycles can be achieved per hour.

l Fast: The “latch & release” system functions automatically each time the load line is slackened.

Barrier Lifter KM 932MB

Type Opening range A Self weight Load capacity Operating weight(min./max.)

(mm/in) (kg/lbs) (kg/lbs) (t/lbs)KM 932MB-6/10 120 – 305 / 4.72 - 12.01 165 / 363 6580 / 14476 18 - 27 / 39600 - 59400KM 932MB-12/14 295 – 395/ 11.61 - 15.55 145 / 319 6580 / 14476 18 - 27 / 39600 - 59400

Technical Drawings

KM 932MB-12/14

32

1

Absteckung durch Bolzenadjustment of openingrange by pin

Arm 1

Arm 2

40

29O

870

25

Ö�nungsbereichopening range

Klemmbereich clamping range

785

optische Kraftanzeigeoptical power indicator

Arm 1

Arm 2

1234

29

40

875

785

25

Ö�nungsbereich opening range

Klemmbereichclamping range A

Absteckung durch Bolzenadjustment of openingrange by pin

optische Kraftanzeigeoptical power indicator

O

KM 932MB-6/10


ManipulatorsKM 930EThe KM 930E Manipulator is the ideal tool to lift and position tubes and poles - for excavators with 7t - 12t / 15400 - 26400 lbs or with 16t - 25t / 35200 - 55000 lbs operating weight.

l Movability due to three hydraulic functions: grab and rotate (2 hydraulic circuits needed). The tilt functions is conducted by the bucketcylinder.

l Endless rotation.l High load capacities from 1000 kg / 2200 lbs to 2000 kg / 4400 lbs

can be mastered by the KINSHOFER Manipulators.l Precise positioning due to the flat 15t-rotator for KM 930-1000E, or

the integrated rotation for KM 930-2000E with 4000 Nm / 2950 ft.lbs torque.

l Secure retention of loads thanks to the integrated non-return valve and gripper pads at the tine tips.

Manipulator KM 930E

Type Load capacity Pole Ø Width Number Weight Closing force Operating(min. - max.) of tines weight excavator

(kg/lbs) (mm/in) (mm/in) (kg/lbs) (kN/lbf ) (t)

KM 930-1000E 1000 / 2200 70 - 300 / 2.76 - 11.81 1385 / 54.53 2 280 / 616 36 / 7920 7 - 12 /

15400 - 26400

KM 930-2000E 2000 / 4400 250 - 600 / 9.84 - 23.62 2180 / 85.83 4 980 / 2156 32 / 7040 16 - 25 /

35200 - 55000

Package consists of: manipulator, KINSHOFER rotation (KM 930-1000E: KM 15 F273/273; KM 930-2000E: integrated rotation), non-return valve

Note: tubes and poles must be clamped in the center of gravity

KINSHOFER Rotator Unlimited rotation. Overload protection due to pressure relief valves.

Upper connection Torque Bending moment max.Type (bores/Ø hole pattern)

(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 930-1000E: KM 15 F273/273 10 x M16 / Ø 273 / 10.75 2000 / 1475 50000 / 36875

Accessories

Type Description

KM 980-2 solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting – 12 V or 24 V, working pressure max. 250 bar / 3600 psi, oil flow 60 l/min / 15.85 GPM (do-it-yourself assembly)

KM 980-2 c solenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and mounting on the KM 930E manipulator – 12 V or 24 V, working pressure max. 250 bar / 3600 psi, oil flow 60 l/min / 15.85 GPM

Requirements of ExcavatorKM 930-1000E KM 930-2000E

Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psi max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPM 40 - max. 120 l/min / 10.57 - max. 31.70 GPMOperating pressure (rotation): 20 - 35 MPa (200 - 350 bar) / 2901 - 5076 psi 17 - 25 MPa (170 - 250 bar) / 2466 - 3626 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM 40 - max. 75 l/min / 10.57 - max. 19.82 GPM

Technical Drawings

7 t 8 t 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t ... 20 t 21 t 22 t ... 25 t

KM 930-1000E KM 930-2000E


Compactor / Multi Purpose Compactor

MAV CompactorType Length A Width B Height C Weight Frequency Compactor Operating

(mm/in) (mm/in) (mm/in) (kg/lbs) (Hz) force (kg/lbs) weight (t/lbs)MAV 08 650 / 25.59 400 / 15.75 430 / 16.93 180 / 396 75 3500 / 77000 1 - 8 / 2200 - 17600MAV 18 900 / 35.43 600 / 23.62 560 / 22.05 380 / 836 60 7500 / 16500 9 - 18 / 19800 - 39600MAV 35 1000 / 39.37 740 / 29.13 560 / 22.05 510 / 1122 58 7500 / 16500 19 - 35 / 41800 - 77000MAV 40 1100 / 43.31 850 / 33.46 560 / 22.05 650 / 1430 58 14000 / 30800 25 - 40 / 55000 - 88000MAV 45 1100 / 43.31 850 / 33.46 700 / 27.56 750 / 1650 58 14000 / 30800 41 - 45 / 90200 - 99000Package consists of: compactor, frame, hydraulic set

MAU Multi Purpose Compactor Type Quick Length A Width B Height C Weight Frequency Compactor Operating

hitch (mm/in) (mm/in) (mm/in) (kg/lbs) (Hz) force (kg/lbs) weight (t/lbs)MAU 06 S40 550 / 51.62 400 / 15.75 430 / 16.93 180 / 396 75 3500 / 77000 1 - 6 / 2200 - 13200MAU 08 S45 / S50 710 / 27.95 600 / 23.62 560 / 22.05 220 / 484 60 3500 / 77000 5 - 8 / 11000 - 17600MAU 14 S45 / S50 760 / 29.92 740 / 29.13 560 / 22.05 380 / 836 60 7500 / 16500 9 - 14 / 19800 - 30800MAU 18 S60 885 / 34.84 850 / 33.46 560 / 22.05 510 / 1122 60 7500 / 16500 12 - 18 / 26400 - 39600MAU 24 S70 885 / 34.84 850 / 33.46 560 / 22.05 650 / 1430 58 7500 / 16500 19 - 24 / 41800 - 52800

Accessories MAUType Length A Width B Weight Cutting wheel Quick hitch Operating

(mm/in) (mm/in) (kg/lbs) (mm/in) weight (t/lbs)MVP 06 compactor plate 650 / 25.59 400 / 15.75 60 / 132 - S40 1 - 6 / 2200 - 13200MVP 08 compactor plate 900 / 35.43 600 / 23.62 120 / 264 - S45 / S50 5 - 8 / 11000 - 17600MVP 14 compactor plate 1000 / 39.37 600 / 23.62 140 / 308 - S45 / S50 9 - 14 / 19800 - 30800MVP 18 compactor plate 1100 / 43.31 740 / 29.13 220 / 484 - S60 12 - 18 / 26400 - 39600MVP 24 compactor plate 1100 / 43.31 740 / 29.13 220 / 484 - S70 19 - 24 / 41800 - 52800

ASF M 40-50 asphalt cutter - - 110 / 242 450 x 10 / 17.72 x 0.39 S40, S45 or S50 13 - 20 / 28600 - 44000ASF M 60 asphalt cutter - - 110 / 242 450 x 10 / 17.72 x 0.39 S60 21 - 24 / 46200 - 52800

RotationsType Upper connection Torque Oper. pressure Internal pressure Bending moment

(mm/in) (Nm/ft.lbs) (max. bar/psi) (bar/psi) max. (Nm/ft.lbs)KM 15 F273/273 Rotator 10 x M16 / Ø 273 / 10.75 2000 / 1475 320 / 4608 150 / 2160 50000 / 36875RD 12 F273/270 Worm Gear 16 x M16 / Ø 270 / 10.63 7500 / 5531 350 / 5040 120 / 1728 28000 / 20650

Requirements of ExcavatorOperating pressure: MAV 08 - 35 & MAU 06 - 24: min. 11 MPa (110 bar) / 1584 psi - MAV 40/45: min. 14 MPa (140 bar) / 2016 psiRecommended oil flow (min.-max.): MAV 08, MAU 06 - 08: 25-75 l/min / 6.61-19.82 GPM; MAV 18 - 35, MAU 14 - 24: 40-120 l/min / 10.57-31.70 GPM;

MAV 40 - 45: 90-130 l/min / 23.78-34.35 GPMTechnical Drawings

MAU

12 t … 18 t … 24 t … 35 t 40 t 45 t…6 t…1 t

MAV

MVP Compactor Plate

ASF MAsphalt Cutter

With the MAV high frequency Compactor, malleable, loose and semi-solid soil or gravel can be compressed and solidified conveniently and eco- nomically using an excavator – to the best advantage, in combination with a Tiltrotator. The same goes for the MAU Multi Purpose Compactor. This together with a MVP compactor plate – which can be easily exchanged with other attachments such as the asphalt cutter ASF M. Also buckets or demolition & sorting grabs can be exchanged via the quick change system for vibrating operations. For excavators from 1t / 2200 lbs to 24t / 52800 lbs operating weight (MAV: up to 45t / 99000 lbs).

l Efficiency: time saving compared to conventional manual compactors. Better for difficult to access on working sites. High compression depth.

l Safety: less risk of moving (no swinging) and compacting (no tilting) on malleable soils.

l Multi purpose: more than vertical compacting possible. With the MAU, totally new applications are possible through any kind of attachment, and easily exchanged.

l Longevity: wear parts made of special steel.

MAV / MAU

C

B A

175

132 MAV 08 with RD 12 Worm Gear


... 2 t 5 t ... 10 t ... 15 t ... 20 t 25 t 30 t 40 t 45 t 50 t

The Disc Grinder STF is the ideal tool for scoring or grinding e.g. stumps or frozen soil. For excavators with 7t / 15400 lbs to 50t / 110000 lbs operating weight. The PLB Asphalt Grinder is used to grind the bitumen sheeting layer by layer, fast and easy. For excavators with 2t / 4400 lbs to 18t / 39600 lbs operating weight. l STF: equipped with standard ripper teeth. l PLB: different widths from 300 mm / 11.81 in - 600 mm / 23.62 in,

or grind depths from 0 mm / 0 in - 150 mm / 5.91 in available.l Fast grinding of surfaces. l Special sizes available on request. l Different adapters available.

Disc Grinder STF

Type Diameter grind disc Weight Height Operating weight excavator(mm/in) (kg/lbs) (mm/in) (t/lbs)

STF 15100 1500 x 100 / 59.06 x 3.94 1300 / 2860 1900 / 74.80 7 - 50 / 15400 - 110000STF 1870 1800 x 70 / 70.87 x 2.76 1500 / 3300 2100 / 82.68 7 - 50 / 15400 - 110000

Package consists of: grinder disc, one set standard teeth, mud guard, standard suspension for nordic style coupling, motor*other adapters available on request

STF / PLB Disc and Asphalt Grinder

PLB

Grinding Cylinder of Asphalt Grinder PLB

Asphalt Grinder PLB

Type Grind width Grind depth Recommended oil flow Rotation Weight Operating Operating weight(mm/in) (mm/in) (l/min / GPM) (°) (kg/lbs) pressure (bar/psi) excavator (t/lbs)

PLB 300 300 / 11.81 0 - 100 / 0 - 3.94 40 - max. 75 / 10.57 - max. 19.82 135 330 / 726 180 - 250 /

2016 - 43203 - 6 /

6600 - 13200

PLB 450 450 / 17.72 0 - 150 / 0 - 5.91 75 - max. 140 / 19.82 - max. 36.99 130 650 / 1430 180 - 250 /

2016 - 43206 - 12 /

13200 - 26400

PLB 600 600 / 23.62 0 - 150 / 0 - 5.91 100 - max. 200 / 25.81 - max. 52.84 120 950 / 2090 180 - 300 /

2016 - 432012 - 18 /

26400 - 39600


One hydraulic circuit neededOperating Pressure STF: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow STF: 60 - max. 200 l/min / 15.85 - max. 52.84 GPM

Pictures

Disc GrinderSTF 15100

STF


2 t1 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

The SKB Sweeper Roller is the perfect tool for levelling slopes, lawns, gravelled areas, etc. Available for loaders as well. The ROB Rotor Brush is used to clean smaller areas or to level gravel etc. For excavators from 1t / 2200 lbs up to 20t / 44000 lbs operating weight.SKB:l Wide range of widths: 1000 mm / 39.37 in - 3000 mm / 118.11 in available, equipped

with 300 mm / 11.81 in bristles.l Efficiency: can be equipped with different brushes for different applications. The same frame

can be used for different rollers. l Bristles level slopes, lawns, gravelled areas, etc.ROB:l Flexible: different brushes available (steel or synthetic bristles, rubber hoses) for all jobs. Cleaning

and flattening smaller areas or levelling loose materials such as gravel, ballast, ballast, etc. l Optional rubber guard: if used in the public in narrow areas, you can use the brush with a rubber

guard for additional security. Can be mounted on either side.l Different couplings available. l Low oil consumption.

SKB / ROBSweeper Roller / Rotor Brush

Sweeper Rollers SKB

Type Bristle Sweep Weight Width Height Depthlength diameter

(mm/in) (mm/in) (kg/lbs) (mm/in) (mm/in) (mm)SKB 10 300 / 11.81 900 / 35.43 280 / 616 1000 / 39.37 1200 / 47.24 1200 / 47.24SKB 15 300 / 11.81 900 / 35.43 330 / 726 1500 / 59.06 1200 / 47.24 1200 / 47.24SKB 20 300 / 11.81 900 / 35.43 380 / 836 2000 / 78.74 1200 / 47.24 1200 / 47.24SKB 26 300 / 11.81 900 / 35.43 420 / 924 2600 / 102.36 1200 / 47.24 1200 / 47.24SKB 30 300 / 11.81 900 / 35.43 475 / 1045 3000 / 118.11 1200 / 47.24 1200 / 47.24

Package consists of: sweeper roller

Rotor Brush ROB

Type Sweep Weight Lengthdiameter(mm/in) (kg/lbs) (mm/in)

ROB 20 900 / 35.43 170 / 374 1600 / 62.99

Package consists of: rotor brush


One hydraulic circuit needed Operating Pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: SKB: 40 - max. 150 l/min / 10.57 - max. 39.63 GPM ROB: 30 - max. 60 l/min / 7.93 - max. 15.85 GPM

Pictures

SKB

ROB

ROB with plastic bristles

ROB with rubber hoses for ballast

ROB with steel bristles

Snow Sweeper

Exchangeable: plastic bristles for SKB 26


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

SKS Bucket SweeperThe SKS Bucket Sweepers are the perfect tools for flattening and carrying surplus materials from slopes, lawns, gravelled surfaces, etc. Equipped with a ballast sweeper, ballast areas and routes can easily be flattened and cleaned up. Shovel and broom function: Surplus materials like asphalt pieces or waste like trunk chips can be taken away by means of the integrated bucket. Also available for loaders. l Different widths available: 1500 mm / 59.06 in - 3000 mm / 118.11 in,

furnished with a bristle diamter of 915 mm / 36.02 in.l Other sizes and models available.l Efficient: can be furnished with different bristles for different jobs. For

example with rubber pipes or optionally with additional lateral rotor brush.

l Integrated bucket: picks up surplus material and waste.l Flexible: not only available for loaders, but as a combination for loaders

and excavators too. Also available with rubber hoses for ballast.

Exchangeable:SKS with plastic

bristles or rubber hoses

SKS with rubber hoses

Bucket Sweeper SKS

Type Bristle Weight Width Bucket Operatingdiameter volume weight

NEW TYPES (mm/in) (kg/lbs) (mm/in) (l/c.y.) (max. t/lbs)SKS 15 915 / 36.02 330 / 726 1500 / 59.06 415 / 0.54 <18 / 39600SKS 20 915 / 36.02 500 / 1100 2000 / 75.74 460 / 0.60 <22 / 48400SKS 26 915 / 36.02 650 / 1430 2600 / 102.36 700 / 0.92 <22 / 48400SKS 30 915 / 36.02 760 / 1672 3000 / 118.11 745 / 0.97 <24 / 52800

Package consists of: bucket sweeper

Requirements of ExcavatorOne hydraulic circuit neededOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 60 - max. 200 l/min / 15.85 - max. 52.84 GPMDifferent couplings available

Pictures


...1 t 5 t ... 10 t ... 25 t ... 30 t ... 40 t ... 50 t 60 t

Frost RipperThe TJR Frost and Ice Ripper is the ideal tool to break and crush stones, frozen soil or ice. Available for excavators with 1t / 2200 lbs - 40t / 88000 lbs operating weight.

l Robust design: no protruding parts, stable construction.l Exchangeable tooth tip as wear part.l Different couplings available. l Wide range of sizes and operating weights.

TJR

Frost and Ice Ripper TJR

Type Depth Thickness Weight Tooth Excavator operating weight

(mm/in) (mm/in) (kg/lbs) (t/lbs)TJR 2 400 / 15.75 30 / 1.18 25 / 55 CAT 1 - 2 / 2200 - 4400TJR 4 500 / 19.69 50 / 1.97 50 / 110 CAT 2 - 4 / 4400 - 8800TJR 6 600 / 23.62 50 / 1.97 75 / 165 CAT 4 - 6 / 8800 - 13200TJR 8 700 / 27.56 50 / 1.97 100 / 220 CAT 6 - 8 / 13200 - 17600TJR 12 700 / 27.56 70 / 2.76 160 / 352 CAT 8 - 12 / 17600 - 26400TJR 14 900 / 35.43 70 / 2.76 250 / 550 CAT 12 - 14 / 26400 - 30800TJR 20 1000 / 39.37 100 / 3.94 290 / 638 CAT 14 - 20 / 30800 - 44000TJR 24 1000 / 39.37 100 / 3.94 390 / 858 CAT 20 - 24 / 44000 - 52800TJR 30 1200 / 47.24 130 / 5.12 400 / 880 CAT 24 - 30 / 52800 - 66000TJR 35 1200 / 47.24 130 / 5.12 500 / 1100 CAT 30 - 35 / 66000 - 77000 TJR 40 1400 / 55.12 130 / 5.12 800 / 1760 CAT 35 - 40 / 77000 - 88000

Package consists of: ripper tooth, tooth tip, standard suspension for nordic style coupling

Note: adapters for quick exchange systems from other manufacturers available

Pictures


Additional and Small Parts

KM 381 09

KM 680

KM 685 06 hook

KM 685 05

KM 685 08

KM 685 07

KM 681

Accessories

Type Description

KM 381 09 720 compression rails, length 720 mm / 28.35 in

KM 381 09 1000 compression rails, length 1000 mm / 39.37 in

KM 685 05* adapter for compression rails for different grabs(Load capacity max. 250 kg)

KM 680 1t-4t* scraper



KM 680 C12VE/18VE* scraper for C12VE and C18VE

KM 680 C25VE* scraper for C25VE

KM 681 800 bolt-on shells for R12H, volume 225 l / 0.29 c.y.

KM 681 1000 bolt-on shells for R12H, volume 275 l / 0.36 c.y.

KM 682 shell support for easy mounting of shells for R12H

KM 685 06 hook welded hook

KM 685 06 hook set 2 welded hooks, set with 2 pieces

KM 685 07 set* wear plates (set)

KM 685 08 extension for excavating – 450 mm / 17.72 in (60 kg / 132 lbs)

KM 685 09 E bolt-on side plates

KM 685 10 retrofitted plate to close backside for handling of small material

KM 980-2 2t-8t solenoid valve, up to 26 MPa (260 bar) / 3744 psi for self installation

KM 980-2 2t-8t c solenoid valve, up to 26 MPa (260 bar) / 3744 psi incl. parts and installation

* please specify width of grab when ordering


Accessories for Cardanic Mounting of GrabsKM 501 – Upper Suspension without Pendulum Damper

When ordering please specify excavator modelUpper

Type Operating weight For rotator type connectionof excavator (width x pin-Ø)

(t/lbs) (mm/in)KM 501 1t-8t 1 - 8 / 2200 - 17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18KM 501 6t-12t 6 - 12 / 13200 - 26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57KM 501 9t-12t 9 - 12 / 19800 - 26400 KM 10 F275-50 110x50 / 4.33x1.97KM 501 13t-25t 13 - 25 / 28600 - 55000 KM 10 F275-60 125x60 / 4.92x2.36KM 501 19t-60t 19 - 60 / 41800 - 132000 KM 15 F340-70 / KM 15 F273-70 / integrated rotator* 180x70 / 7.09x2.76

* integrated rotation with cardanic suspension for C40/60/80H, P22V, P25VR HD, P30/40/51VHD and T30VHD

KM 511 – Upper Suspension with Pendulum Damper (can be retrofitted)

When ordering please specify excavator modelUpper

Type Operating weight For rotator type connectionof excavator (width x pin-Ø)

(t/lbs) (mm/in)KM 511 1t-8t 1 - 8 / 2200 - 17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18KM 511 6t-12t 6 - 12 / 13200 - 26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57KM 511 9t-12t 9 - 12 / 19800 - 26400 KM 10 F275-50 110x50 / 4.33x1.97KM 511 13t-25t 13 - 25 / 28600 - 55000 KM 10 F275-60 125x60 / 4.92x2.36KM 511 19t-60t 19 - 60 / 41800 - 132000 KM 15 F340-70 / KM 15 F273-70 / integrated rotator* 180x70 / 7.09x2.76

* integrated rotation with cardanic suspension for C40/60/80H, P22V, P25VR HD, P30/40/51VHD and T30VHD

Adapter for Lehnhoff Grab Exchange System for Cardanic Mounting (without suspension)

Type Suitable for Operating weight of excavatorLehnhoff quick exchange system

(t/lbs)SW01 cardanic MS01 up to 2 / 4400SW03 cardanic MS03 up to 5 / 11000SW08 cardanic MS08 up to 12 / 26400SW10 cardanic MS10 up to 19 / 41800SW21 cardanic MS21 up to 28 / 61600SW25 cardanic MS25 up to 40 / 88000SW40 cardanic MS40 up to 70 / 154000

Please note: adapter for quick exchange systems from other manufacturers available

Technical Drawings

Grab with cardanic suspension Grab with cardanic suspension and quick exchange system


Accessories for Rigid Mounting of GrabsAdapter for Rigid Mounting (incl. pins and mounting bolts)

Type

Operating weight of excavator

(t/lbs)KM 690 2t up to 2 / 4400KM 690 8t up to 8 / 17600KM 690 15t up to 15 / 33000KM 690 20t up to 20 / 44000KM 690 27t up to 27 / 59400KM 690 32t up to 32 / 70400KM 690 40t up to 40 / 88000KM 690 50t up to 50 / 110000KM 690 70t up to 70 / 154000

Adapter for Specific Solutions (incl. mounting bolts)

Type

Operating weight of excavator

(t/lbs)KM 691 2t up to 2 / 4400KM 691 8t up to 8 / 17600KM 691 15t up to 15 / 33000KM 691 20t up to 20 / 44000KM 691 27t up to 27 / 59400

Bolt-on Adapter for Lehnhoff Grab Exchange System for Rigid Mounting (incl. mounting bolts)

Type suitable for Operating weight of excavatorLehnhoff quick change system

(t/lbs)SW01 rigid MS01 up to 2 / 4400SW03 rigid MS03 up to 5 / 11000SW08 rigid MS/HS 08 up to 12 / 26400SW10 rigid MS/HS 10 up to 19 / 41800SW21 rigid MS/HS 21 up to 28 / 61600SW25 rigid MS/HS 25 up to 40 / 88000SW40 rigid HS40 up to 70 / 154000SW100 rigid HS100 up to 120 / 264000

Bolt-on Adapter for Oilquick Grab Exchange System for Rigid Mounting

Type suitable for Operating weight of excavatorOilquick quick change system

(t/lbs)OQ45 OQ45 5 – 12 / 11000 - 26400OQ60 OQ60 12 – 18 / 26400 - 39600OQ65 OQ65 14 – 22 / 30800 - 48400OQ70 OQ70 15 – 28 / 33000 - 61600OQ70/55 OQ70/55 18 – 28 / 39600 - 61600OQ80 OQ80 45 – 70 / 99000 - 154000

Note: Adapters for quick-exchange-systems from other manufacturers also available

Technical Drawings

Grab with adapter for rigid mounting Grab with adapter for quick exchange system for rigid mounting


KM 04 F KM 04 F-USE KM 06 F140-40 KM 10 F275-50 KM 15 F273/273

KINSHOFER is a manufacturer of rotators for excavators, truck loaders and logging operations. Many years of experience in designing rotators and hydraulic load handling equipment allow the production of very efficient and long lasting rotators, specially tailored to each operational requirement.

l Wide range: depending on the usage and carrier unit the load capacity – up to 15t / 33000 lbs – and the design – a rotator with flange or with shaft is possible to use.

l ”Gear-type“-design: ensures very compact and powerful rotators. Precise control of approach and stop – even at a high oil temperature.

l Endless rotation with integrated oil ducts for one hydraulic circuit as standard; rotators with four oil passages are also available.

l The pressure relief valve allows the rotator independence from the hydraulic system of the excavator and prevents overstressing.l Safe admission of pressure, move and bending load through big dimensioned roller bearings.l Minimization of abrasion: by using high quality tempered steel, the outer surface is hardened through a nitrate-coating.

KINSHOFER Rotator Line

Product Range Rotators

Type Load capacity Hole pattern Torque Moment ofdeflection max.

Hydraulic connection Weight(width x Ø of pin) Rotator Grab

(kg/lbs) (mm/in) (Nm/ft.lbs) (Nm/ft.lbs) (kg/lbs)KM 04 F 4500 / 9900 84 x 30 / 3.31 x 1.18 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 26 / 57KM 04 F140-30USE 4500 / 9900 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270 M 18x1,5 M 18x1,5 31 / 68KM 04 F140-30VE 4500 / 9900 84 x 30 / 3.31 x 1.18 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 26 / 57KM 06 F140-40 6000 / 13200 84 x 40 / 3.31 x 1.57 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 34 / 75KM 07 F180-40 7000 / 15400 84 x 40 / 3.31 x 1.57 2000 / 1475 15000 / 11065 G 1/2“ M 27x2 76 / 167KM 10 F173-45E 10000 / 22000 100 x 45 / 3.94 x 1.77 2000 / 1475 12000 / 8850 G 1/2“ G 1/2“ 65 / 143KM 10 F173-52E 10000 / 22000 136 x 52,2 / 5.35 x 2.06 2000 / 1475 12000 / 8850 G 1/2“ G 1/2“ 69 / 152KM 10 F180-50 10000 / 22000 110 x 50 / 4.33 x 1.97 2000 / 1475 15000 / 11065 G 1/2“ M 27x2 78 / 172

Product Range Rotators Without Head Plates

Type Load capacity Torque Moment ofdeflection max

Hydraulic connection WeightRotator Grab

(kg/lbs) (Nm/ft.lbs) (Nm/ft.lbs) (kg/lbs)KM 04 F140/150 4500 / 9900 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 34 / 75KM 06 F 140/180 6000 / 13200 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 38 / 84KM 06 F173/180 6000 / 13200 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 34 / 75KM 07 F275/180 7000 / 15400 2000 / 1475 14000 / 10325 G 1/2“ G 3/4“ 73 / 161KM 10 F173/180 10000 / 22000 2000 / 1475 12000 / 8850 G 1/2“ M 27x2 60 / 132KM 10 F275/180V 10000 / 22000 2000 / 1475 14000 / 10325 G 1/2“ G 3/4“ 73 / 161KM 15 F340/220 15000 / 33000 3000 / 2215 25000 / 18440 G 1/2“ G 3/4“ 160 / 352KM 15 F273/273 15000 / 33000 2000 / 1475 50000 / 36875 G 1/2“ G 3/4“ 71 / 156

Head Plates for Rotators

Type Type of rotator Load capacity Width of eye Pin diameter(kg/lbs) (mm/in) (mm/in)

KM 692 4t-6t 30 KM 04 F140/150 4500 / 9900 84 / 3.31 30 / 1.18KM 692 4t-6t 40 KM 06 F173/180 6000 / 13200 84 / 3.31 40 / 1.57KM 692 7t-10t 40 KM 07 F275/180 7000 / 15400 84 / 3.31 40 / 1.57KM 692 7t-10t 50 KM 10 F173/180 - KM 10 F275/180 10000 / 22000 110 / 4.33 50 / 1.97KM 692 7t-10t 60 KM 10 F173/180 - KM 10 F275/180 10000 / 22000 125 / 4.92 60 / 2.36KM 692 15t 70 273 KM 15 F273/273 15000 / 33000 180 / 7.09 70 / 2.76KM 692 15t 70 340 KM 15 F340/220 15000 / 33000 180 / 7.09 70 / 2.76


Robust grabs for excavators with revolutionary exchange system in a single device. As a new demand on site arises, the attachment can be exchanged and the new application can commence. Easy remounting of shells for excavating, landscaping, laying pipes, logging, rail track handling etc.

l Efficiency: only the shells are replaced; exchange is possible with only one person.l Fastness: easy exchange of the lynch pin from the change-over system

within 4 minutes, no hydraulic work necessary.l Robust technics: compact design through the integrated rotator. Robust shell

bearing with coexisting change mechanism.

Clamshell buckets with exchangeable shells are available for:l excavators up to 8t/17600 lbs: C08VE/ T08VE/ R08VE and other exchangeable shellsl excavators up to 12t/26400 lbs: C12VE/ T12VE/ R12VE and other exchangeable shellsl excavators up to 18t/39600 lbs: C18VE/ T18VE/ R18VE and other exchangeable shellsl excavators up to 25t/55000 lbs: C25VE and other exchangeable shells

C-VE

Clos

e bu

cket

and

set

it d

own.

M

ount

the

exch

ange

su

ppor

t.

Start

Rem

ove

the

lync

h pi

n fr

om

the

chan

ge-o

ver s

yste

m0.58min.

Rem

ove

the

chan

ge-o

ver p

in

with

ext

ract

ion

tool

.

1.67min.

Posit

ion

the

buck

et c

arrie

r ove

r th

e ne

w a

ttac

hmen

t and

clo

se

the

lock

ing

unit

hydr

aulic

ally

.

2.50min.

Inse

rt th

e ch

ange

-ove

r pin

and

fa

sten

the

lync

h pi

n.

3.75min.

Rem

ove

the

exch

ange

su

ppor

t. Re

ady

for u

se!4 min.

finished!

Kinshofer Exchangeable Shell System

Rock Grab

Pipe Grab

Timber Grab

Clamshell Bucket

Multi Purpose Grab

Well Shaft Grab

Operating Module


The bucket shells of the HPXdrive are bolted to the shafts, and therefore it is very easy to replace them with another set of shells. Different types of shells for different applications can be refitted onto the driving unit, e.g. clamshell bucket, rock grab, timber grab, hay and forestry grab and multi purpose clamshell. Other types of shells are available on request.

The interchangeable shells are delivered with an exchange aid that guarantees that the HPXdrive can be positioned with ease.

Exchangeable Shells

Package: exchangeable shells, bolt-on teeth (for clamshell buckets), exchanging support

HPXdrive

Please note: The KINSHOFER HPXdrive shells can only be used in combination with KINSHOFER rotator and drive unit HPXdrive

Type Operating Width Volume Numberof teeth

Self weight Load weight capacity(t/lbs) (mm/in) (liter/c.y.) (kg/lbs) (kg/lbs)

Exchangeable Shells for Clamshell Bucket

C05HPX-40S 3 - 5 / 6600 - 11000 400 / 15.75 115 / 0.15 4 100 / 220 3000 / 6600C05HPX-45S 3 - 5 / 6600 - 11000 450 / 17.72 130 / 0.17 4 125 / 275 3000 / 6600C05HPX-50S 3 - 5 / 6600 - 11000 500 / 19.69 140 / 0.18 4 130 / 286 3000 / 6600C05HPX-60S 3 - 5 / 6600 - 11000 600 / 23.62 170 / 0.22 6 145 / 319 3000 / 6600C05HPX-80S 3 - 5 / 6600 - 11000 800 / 31.50 230 / 0.30 6 180 / 396 3000 / 6600

C08HPX-40S 5 - 8 / 11000 - 17600 400 / 15.75 145 / 0.19 4 110 / 242 3000 / 6600C08HPX-45S 5 - 8 / 11000 - 17600 450 / 17.72 160 / 0.21 4 135 / 297 3000 / 6600C08HPX-50S 5 - 8 / 11000 - 17600 500 / 19.69 180 / 0.24 4 145 / 319 3000 / 6600C08HPX-60S 5 - 8 / 11000 - 17600 600 / 23.62 220 / 0.29 6 150 / 330 3000 / 6600C08HPX-80S 5 - 8 / 11000 - 17600 800 / 31.50 300 / 0.39 6 195 / 429 3000 / 6600

Exchangeable Shells for Demolition and Sorting Grab

D03HPX-40S 3 / 6600 400 / 15.75 60 / 0.08 - 70 / 154 1000 / 2200D05HPX-50S 3 - 5 / 6600 - 11000 500 / 19.69 100 / 0.13 - 120 / 264 1000 / 2200D09HPX-60S 5 - 9 / 11000 - 19800 600 / 23.62 150 / 0.20 - 140 / 308 1000 / 2200

Exchangeable Shells for Multi Purpose Grab

A05HPX-40S 3 - 5 / 6600 - 11000 400 / 15.75 100 / 0.13 3 135 / 297 1000 / 2200A09HPX-50S 5 - 9 / 11000 - 19800 500 / 19.69 200 / 0.26 5 205 / 451 2500 / 5500

Exchangeable Shells for 3-Finger Timber Grab

T05HPX-3ZS 3 - 5 / 6600 - 11000 375 / 14.76 - - 95 / 209 1000 / 2200T09HPX-3ZS 5 - 9 / 11000 - 19800 375 / 14.76 - - 95 / 209 2000 / 4400

Exchangeable Shells for Rock Grab

R05HPX-0,16S 3 - 5 / 6600 - 11000 400 / 15.75 0,16 m2 / 0.11 cords - 70 / 154 1000 / 2200R08HPX-0,16S 5 - 8 / 11000 - 17600 400 / 15.75 0,16 m2 / 0.11 cords - 70 / 154 1000 / 2200


EXA

-KIN

-CO

N-E

-011

5

Upfront, everywhereKINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.

www.kinshofer.com

Hauptsitz Deutschland: Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: [email protected]

United Kingdom:Kinshofer UK Ltd.4 Milton Industrial CourtHorsfield Way, BredburyStockport, Cheshire, SK6 2TATel.: +44 (0)161 – 406 7046Fax: +44 (0)161 – 406 7014Email: [email protected]

France: Kinshofer  France S.A.R.L.B.P. 20100F-67213 Obernai CedexTel.:   +33(0) 3 88 39 55 00Fax:  +33(0) 3 88 79 06 75Email: [email protected]

Canada: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: [email protected]

United States of America:Kinshofer USA6420 Inducon DriveSuite GSanborn, NY, 14132Tel.: +1 (716) 731 4333Toll Free (North America): 1 (800) 268 9525www.kinshofer.com

中国: Darda Kinshofer Construction Machinery Co. Ltd.Unit #306, Landmark Tower 28 Dongsanhuan Road Beijing 100004Tel.: +86 (10) 6590 6422Fax: +86 (10) 6590 6423Email: [email protected]

Suomi: Kinshofer Finland OyRealparkinkatu 9,FI-37570 LempääläTel.: +358 (0)75 7540 200Fax: +358 (0)3 6870 466Email: [email protected]

Sverige: RF System AB Furutorpsgatan 6SE-288 34 VinslövTel.: +46 (0)44 817 07Fax: +46 (0)44 859 63Email: [email protected]

1 construction general construction - … · · 2016-04-191 construction -general construction...

Documents