1-catia basic exercises
DESCRIPTION
catiaTRANSCRIPT
2
Table of Contents
1. Manipulating Objects p.3Start and open a document. p.8
Change the Part Number. p.9
Change graphic properties. p.10
Open a new document. p.11
Copy / Paste a Body. p.12
Modify a feature. p.14
Use the compass to move features p.15
Hide / show p.16
Delete a Body
ExerciseManipulating Objects.
In this exercise you will learn basic tools to manipulate documents and get familiar with standard CATIA V5 interface.
40 min.
4
Design Intent: Manipulating Objects
You will work on one Part ( .CATPart)
This Part contains some features.You do basics operations ( copy / paste ..) to manipulate these features
5
Design Process: Manipulating Objects
Open a existing document
1
Change Part Number
Change graphics properties3
2
7
Design Process: Manipulating Objects
Use the compass7
Hide and delete a body
8
Drag along Z axis
Copy / Paste
8
Do It Yourself (1/9)
Start Catia and Open a document
Start CATIA
Open CATCOMStep-Dolt.CATPart
File / Open
Load ( open) : CATCOMStep-Dolt.CATPart
CATIA V5Rx
9
Do It Yourself (2/9)
Change the Part NumberChange the Part Number ‘Step2’
Save as new document (new UUID) . Name it Step2.CATPart
10
Do It Yourself (3/9)
Change graphic propertiesChange colour of 5 faces.
Apply a material, ‘ Silver’.
Apply material Apply customized view
Save Step2.CATPart
11
Do It Yourself (4/9)
Open a new document.Open a new document
Display all windows.
Select Window / Tile Vertically.
12
Copy / Paste a BodyCopy / Paste ‘PartBody’ from Step2.CATPart to Copy.CATPart.Save all.
Do It Yourself (5/9)
Copy
Paste
From …. To ….
14
Modify a featureChange the length of the Pad1 to 10 mm.
Close Step2.CATPart and save it.
Do It Yourself (7/9)
x 2
15
Use the compass to move featureCopy / Paste Body1Drag and drop the compass onto the red surface.Move Body.2 with the Compass along Z axis
Do It Yourself (8/9)
Click and drag the red square of the compass
2
1 Copy / Paste
3 Use the Compass to move Body2