1 automatic tyre inflator
TRANSCRIPT
1 Automatic Tyre Inflator
Protech's Automatic Tyre Inflator / Deflator is a microprocessor based system, using latest embedded technology with inflation and deflation function. It is fully automatic and safe device to inflate tyres accurately to a preset pressure. The unit is designed to use minimum compressed air thereby avoiding wastage of compressed air. The system is absolutely weather proof, robust and elegant in design.
Specifications
Accuracy : + 1 PSI
Range : 0 - 150 PSI
Diaplay : 1x1 inch Backlit LCD (702S)
: 2x1 inch Backlit LCD (702D)
Resolution : 1 PSI
: 250(h) x 270(w) x 120(d)Dimensions in mm
Supply Voltage : 230v AC + 20v
Weight : 5 Kgs (Aprox)
Salient Features
Increase - Decrease key on front panel for setting pressure.
Change over switch to display in Kgs/sq.cm on front panel.
Automatic setting of filling speed.
Elegant design.
Touch sensitive long life keys.
Key for back light control.
Remote control unit (wireless) to set desired pressure. (Optional)
Cabinet as per IP 65.
2 Automatic Nitrogen Tyre Inflator
Specifications
Bottle Type Nitrogen Tyre Inflator
The high pressure nitrogen cylinders are standard cylinders which are available in the market.
They hold about 7 cubic meters of nitrogen gas at 2000 PSI, Each cylinder fill approximately 100 tyres.
Cost of refill is approximately Rs.280.
Power supply
Technology
Tank Size
Keypad
Display
Purity of Nitrogen
CMS
Resolution
Dimension
Pressure setting
Pre filter
Counters
: 230V A.C 50 Hz
: PSA (Pressure Swing Adsorption)
: 60 Ltrs
: Touch Type
: 2x1“ LCD Backlit Display
(For Set and Tyre pressure)
: 96 to 99.5%
: German Imported
: 1 Psi
: 1370 x 595 x 460 mm
: 150 Psi
: 10 Microns
: Top Up, & Tyre fill
Bottle Type NitrogenTyre Inflator
Automatic Nitrogen TyreInflator
3 Mobile Electric Waste Oil Extractor
Protech electric waste oil extractor consists of special pumps with high vacuum speed and strong negative pressure ability, which can extract any kind of non-corrosive waste oils.
It is a multipurpose machine, which can be used where there is no liftequipment and trench. The cylinder is made of Polycarbonate which is very strong and rugged. It is transparent, and it is easy to use.
Specifications
Foundation : Collect waste oil from vehicle gear box or Engine
Suitable for : Engine oil and other waste oil
Power supply : AC220V, 50/60HZ, 1PH
Power : 300W
Suction Rate : 1 Litre/min
Tank Capacity : 50 Litres
Working Temperature : 40-80 C (for engine oil)
Dimension : 400x400x750 mm
4 Vacuum Cleaner (VAC AIR)
Specifications
18 Gauge Stainless Steel
4 Bag Filter System provides for longer motor lifethen conventional 2 bag system
High-Security Pin Lock System
Eye-Catching graphics to grab your customer's attention
Adjustable Timers
15x2" Clog/Crush Resistant Hose and Nozzle
Programmable number of coins and time
Each service door is fitted with two stainless steel compression latches to keep the vacuum at maximum power level in case of door gasket wear
Dome aluminum powder coated