0a expdesk aguide - · pdf filemodular desks. modular desks ... • when height-adjustable...
TRANSCRIPT
expansion desking application guide – May 28, 2018
F I X E D - H E I G H T D E S K B A S I C S . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2
SEMI-SUPPORTED L-SHAPED DESK & RECTANGULAR WORKSURFACE BASICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6
H E I G H T - A D J U S T A B L E D E S K B A S I C S . . . . . . . . . . . . . . . . . . . . . 5 0
F I X E D - H E I G H T & H E I G H T - A D J U S T A B L E G A B L E G U I D E L I N E S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2
V I S I T O R O P T I O N B A S I C S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3
D E S K C O M P O N E N T S F O R W / R / S B A S I C S . . . . . . . . . . . . . . . . . . 5 4
E X P A N S I O N D E S K I N G O N W / R / S – T Y P I C A L W O R K S T A T I O N S . . . 5 8
D E S K F I N I S H E S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0
G R A I N D I R E C T I O N / U S E R E D G E . . . . . . . . . . . . . . . . . . . . . . . 6 2
modular desks
modular desks
expansion desking application guide – May 28, 2018
fixed-height desk basics
• Three fixed-height desks are available: Modular, Single Structure and Semi-Supported L-Shaped Desks• Desk assemblies span up to 84" in width without multiple supports• Desks are shipped knocked down• Desks are compatible with all Teknion underworksurface storage products• Cannot be attached to Teknion's W/R/S Wall Rail System . For details on W/R/S, refer to page 54
Expansion Desking worksurfaces are offered in Generic, Linear and Curvilinear shapes. They can be used individually or with other desks to create a variety of workstation configurations.
Curvilinear Shape Modular DesksDesigned to create wrap-around workstations that minimize lateral movement
Generic Shape Modular DesksAvailable in a variety of shapes including: Rectangular, EDP, EDP Corner, Standard Corner, Extended Corner, Rectangular and D-Shaped Peninsula and Bridge
Linear Shape Modular Desks• Inspired from other Teknion
product offerings
• May be used as an aesthetic alternative to generic or curvilinear shape desks
Standard Radius Corner Desk – Half
Gables (RTSR)
End Worksurface –
Convex (RTCD)
Also available:
L-Shaped Desks• Two L-Shapes are available:
Single Structure or Semi-Supported
• Available with or without Radius Corner Worksurface
• Single Structure Desk is supported with gables on both ends
• Semi-Supported L-Shaped Desks are supported with gables on one direction and a selection of various support styles (Legs, Frame Leg, Semi-Supported Leg, storage; all not included) on the other direction
• L-Shaped Desks are available up to 84" x 84"
modular desks
expansion desking application guide – May 28, 2018
fixed-height desk basics (continued)
Bridge Desk – Quarter-Moon (RQMB)• Completes a worksurface by
connecting to a freestanding desk with flush plates
• Comes with two gables, one half and one 3/4
• Can be applied to left or right of worksurface
• Depth must equal desk depth
End Worksurface – Half-Moon (RHMB)• Used to attach and complete
back-to-back workstations
• Must connect to freestanding desks using flush plates
• Comes with a choice of leg (Central Post Leg – 3 1/2" Round or Camber Base)
• Width must equal the total depth of both desks
Worksurfaces• Worksurface dimensions listed are actual dimensions of the finished product
• Some desks include a built-in compressed gas support for mouse and keyboard; see individual product pages
• Height adjustment of keyboard is activated by a release paddle located on the right underside of the surface
• Grain direction varies depending on the type of desk specified; see page 62
• The tilt of keyboard is adjusted using a knob located on the left underside of the surface
AccessoriesCan be specified separately
+15˚
-15˚
0˚35.5"
29"22.5"
6.5"6.5"
0"
modular desks
expansion desking application guide – May 28, 2018
Desking Column Grommet
Worksurface
Structural Beam
Desking Gable Grommet
Corner Post
Wire Management Clip
Gable Attachment
Non-Handed Gable (except for Metal C-Leg)
Levelers are included with the gable and have an adjustment range of 3", except for Metal C-Leg (1" adjustment range)
Assembly Plate is available with L-Shaped Desks only
fixed-height desk basics (continued)
All desks include a worksurface, grommets, structural beams, corner posts and gables (or c-legs)
modular desk anatomy
single structure L-shaped desk anatomy
29" floor to top of finished
worksurface
2
3
45
6
7
8
9
1
2
3
4
5
6
7
8
9
10
10
1
modular desks
expansion desking application guide – May 28, 2018
fixed-height desk basics (continued)
All desks with half gables must be connected to other desks
Gables• Full and half gables are
non-handed for on-site reconfigurability; Metal C-Leg is handed
• All gable styles include a grommet
• Half gables provide additional kneespace clearance at desk junctions
• Flush plates are included to maintain stability and level the surface
• A desk cannot be mounted with Metal C-Legs, if: – overhead cabinets are stacked – Sit-On Cabinets or Elevated Desktop Cabinets are used
Grommets• Desks come with factory-made
grommet cut-outs on the gables and worksurfaces
• Provide openings for electrical wiring and communication cables
• Include plastic ring and cover
Supports• Six support styles are available
to provide a variety of aesthetic options
• Include leveler with a 3" adjustment range
• Support style/desk combinations are not all available; see individual product pages
Flush-Mounted Modesty Panels (RDML, RDMO)• Not required for structural
stability, except in some configurations when overhead cabinets are stacked . For details, refer to page 142
• Can be specified full- or 3/4-height
• Available in Solid (Laminate) or Metal . Metal panels are offered in two styles: Embossed (4 patterns) and Solid
• Can be specified with or without grommet
Linear Style
3/12" Round
Square
Central Post Legs
Camber Base
Full Gable
Half Gable
Metal C-Leg
2" Post Leg – Adjustable
Angled Leg
29" to 32" floor to top of finished
worksurface (All others)
24" to 32" floor to top of finished
worksurface (this leg only)
modular desks
expansion desking application guide – May 28, 2018
semi-supported L-shaped desk & rectangular worksurface basics
• Only Semi-Supported L-Shaped Desks (RNDW_ and RNDR_), Semi-Supported L-Shaped Desks with Radius Corner (RNRW_ and RNRR_), Rectangular Peninsula Desk (RDRP), Rectangular Worksurfaces (RTLDL and RTLDC) can be semi-supported
• The left or right handed configuration is available . It is determined by the return (the shortest worksurface) . The right handed configuration is illustrated below
• Legs, Frame Leg, Semi-Supported Leg, or Storage, must be ordered separately• Suspended Modesty Panel is optional and can be ordered separately
Expansion Desking semi-supported L-shaped desks and worksurfaces can be used to minimize components and reduce the overall cost of the workstation.
semi-supported L-shaped desk anatomy
29" floor to top of finished
worksurface
4
3
2
1
5
Worksurface
Desking Column Grommet
Assembly Plate
Desking Worksurface Grommet is included with desk and is centered in the worksurface . Not available with Semi- Supported L-Shaped Desk with Radius Corner . It can be changed with Rectangular Grommets (RAGC) which can be specified separately
Supports: Legs, Frame Legs, Semi-Supported Leg, Storage (Supported or Hang-On) and W/R/S Brackets are not included with worksurface; they must be specified separately
7
6
8
9
10
11
12
13
Cable Tray
Corner Post
Wire Management Clip
Gable Attachment
Non-Handed Gable
Levelers are included with the gable and have an adjustment range of 3"
Desking Gable Grommet
Structural Beam
2 3
4
5
6
7
8
9
1012
13
11
1
modular desks
expansion desking application guide – May 28, 2018
Frame Legs (RWWO, RWWFL, or RWWFG)• Support the end of a
worksurface to maintain stability
• Three Frame Leg support styles are available:
• When specified, support and hardware are not included with desk
Legs• Five leg support styles are available:
• Central Post Legs can be specified with Rectangular Worksurfaces (RTLDL, RTLDC) only
• When specified, support and hardware are not included with desk
24" to 32" floor to top of finished
worksurface (this leg only)
semi-supported L-shaped desk & rectangular worksurface basics (continued)
supporting applications – 28" high freestanding storage and other supports
Supported by a Freestanding Storage Configurations• Can be used to support one end
of a desk or worksurface
• Must be installed with Supported Pedestal and hardware are included with desk to maintain stability
Side-Supported ConfigurationsCabinet depth must equal depth of worksurface under which it is installed
Back-Supported ConfigurationsCabinet width must equal depth of worksurface under which it is installed
Linear Leg
3 1/2" Round
Square
Central Post Legs
2" Post Leg – Adjustable
Angled Leg
Semi-Supported Leg – Solid (RAVG)• Supports the end of a
worksurface which must be attached to another desk or storage to maintain stability
• Must be specified full width only
• Cannot replace a standard gable when attached to a corner post
• When specified, support and hardware are not included with desk
Also Available:
29" to 32" floor to top of finished
worksurface (All others)
Linking Plates• Can be used to link one end of
a worksurface to a desk
• When specified, Linking Plates and hardware are included with desk or worksurface
Open Solid Infill
Glass Infill
29" from floor to top of
finished worksurface
Rectangular Worksurface (RTLDL or RTLDC) in Collaborative Applications• Must be connected in the junction
of two desks (shown) or can also be used as a return on a single desk with a full gable or credenza
• Even widths are actual; odd widths are 1/2" smaller
• 60" maximum unsupported span is required when connected as a return on a junction of two desks with half gables or c-legs
60" max.
modular desks
expansion desking application guide – May 28, 2018
semi-supported L-shaped desk & rectangular worksurface basics (continued)
hanging applications – freestanding storage higher than 28"
Side-Supported Configurations• Cabinet width must be added
to determine the workstation footprint
• Only the 24" deep Rectangular Worksurface can be side-supported by the Hang-On Supports
Back-Supported Configurations• Cabinet width must equal
depth of worksurface under which it is installed
• Cabinet depth must be added to determine the workstation footprint
Freestanding Storage Higher than 28" and Hang-On Kit (RBXHK)• Can be used to support one end
of a desk or worksurface
• Must be installed with Hang-On Kit to maintain stability
• Semi-Supported Desk widths are available in 3" increments in order to fit with standard 6" layout for hang-on storage configurations
• When specified, Hang-On Brackets and hardware are included with desk, except for Extended Supporting Towers (RBXT or RBXTC) the brackets and hardware are included with storage only
modular desks
expansion desking application guide – May 28, 2018
semi-supported L-shaped desk & rectangular worksurface basics (continued)
Freestanding ConfigurationsThe appropriate support combination will allow using the Rectangular Worksurface as a freestanding product
Some restrictions apply to the support combinations:
freestanding applications
Semi-Supported Legs
Frame Legs Hang-On Supports and Semi-Supported Leg
Semi-Supported Leg and Legs
modular desks
expansion desking application guide – May 28, 2018
height-adjustable desk basics
• Height adjustment must be executed by a qualified installer• Cannot be attached to Teknion's W/R/S Wall Rail System . For details on W/R/S, refer to page 54
Expansion Desking height-adjustable desks can accommodate all the accessories.
7" d
4
3
2
1
5
6
7
Desking Column Grommet
Fixed-Height Worksurface
Height-Adjustable Worksurface
Gable Attachment
Handed Height-Adjustable Half Metal Gable
Corner Post
Worksurface Support
9
8
10
11
12
13
Backsplash
Handed Height-Adjustable Metal C-Leg
Levelers are included with the gable and have an adjustment range of 3"
Desking Gable Grommet
Wire Management Clip
Structural Beam
1
2
3
4
56
9
10
11
12
13
7
8
modular desks
expansion desking application guide – May 28, 2018
height-adjustable desk basics (continued)
• When Height-Adjustable Desks with Half Gables (RJRS, RJRD, RJUS and RJUD) are specified, the adjacent desk must be adjusted at the same height and must be linked with flush plates to maintain stability
• Only 2" Post Legs – Adjustable can be installed under Worksurfaces (RTLDL, RTLDC and RTCD) attached to height-adjustable desks
• Overhead Cabinets cannot be stacked
Height-Adjustable DesksAvailable in Rectangular and Extended Corner shapes
PedestalsWhen height is under 29", 0612 configuration Pedestal (RBSP) or Mobile Pedestal with Seat (RBTPS) can be used
Height-Adjustable Full Metal Gable and Height-Adjustable Metal C-Leg• Handed and attached with
universal mounting hardware
• Grommet included
Height-Adjustable Half Metal Gable• Handed and attached with
universal mounting hardware
• Grommet included
• Provides additional kneespace clearance at desk junction
Flush-Mounted Modesty Panel (RDML and RDMO)• Can be specified full- or
3/4-height
• Is mandatory only on shortest width (Width A, see product pages) of Height-Adjustable Extended Corner Desks
Grommets• Height-Adjustable Desks come
with factory-made grommet cutouts on the gables and worksurfaces
• Provide openings for electrical wiring and communication cables
• Include plastic ring and cover
Full Metal Gable
Metal C-Leg
29" floor to top of finished
worksurface
26" to 32" floor to top of finished worksurface
modular desks
expansion desking application guide – May 28, 2018
fixed-height & height-adjustable gable guidelines
• Height-Adjustable Gables are offered for Height-Adjustable Desks only• Two half gables can sufficiently support two semi-supported desks butted up against one another . Flush plates are included
to maintain stability and level the surface• All desks with half gables cannot be used alone; they must be combined with one or more desks with half gable to form a
complete workstation
Desks are available with full or half gables. Half gables provide additional kneespace clearance at desk junction.
Metal C-Leg
Half Gable
Two Full Gables or Metal C-Legs• Single desks with two full
gables or Metal C-Legs are freestanding and can either be used alone or combined with other desks
• Any desk that does not have two full gables or Metal C-Legs is semi-supported and must be attached to other desks with full gable or Metal C-Leg, or similar support at both ends
• A run of desks cannot exceed 168" without full gable or Metal C-Leg support to maintain stability
Support Requirements for Overhead StorageWhen supporting overhead storage, desks require full gable or Metal C-Leg every 168" maximum
Extended or Corner Desks• Can be used instead of full
gables or Metal C-Legs to provide stability and increase kneespace clearance
• The distance between corner desks must not exceed 72"
Shared Desks• Provide sufficient support (full
gables or Metal C-Legs are not required)
• Act as a full gable or a Metal C-Leg
• May not span more than 120" on either side without full gable or Metal C-Leg support
Full GableFull Gable
Half Gable
Metal C-Leg
Fixed-Height Gables Height-Adjustable Gables
168" max
168" max
72" max
120" max 120" max
modular desks
expansion desking application guide – May 28, 2018
The visitor recessed option allows an additional kneespace clearance for visitor.
visitor option basics
Recessed Visitor Option (R)• Allows more kneespace
clearance for visitor
• Creates an 8" overhang
• Modifies the Inset Modesty Panel width . Use the Inset Modesty Panel (RAML or RAMO) with the Recessed Desk Visitor option for this application
Flush Visitor Option (F)Is ideal for small meeting spaces or team workstations
8"
modular desks
expansion desking application guide – May 28, 2018
desk components for w/r/s basics
• "W/R/S" products listed below are to be used with the W/R/S Wall Rail System only• Products listed below must be ordered individually• For details on W/R/S products, refer to W/R/S Wall Rail System Price and Application Guide
Using specific components, Expansion Desking can be combined with Teknion's Wall Rail System, to create a variety of workstation configurations.
desk components anatomy for W/R/S
29" floor to top of finished
worksurface
4
3
2
1
5
W/R/S-Mounted Worksurface Bracket
W/R/S Frame is not included with Expansion Desking
W/R/S Rectangular Worksurface
Semi-Supported Leg
Levelers are included with the gable and have an adjustment range of 3"
7
6
8
9
Flush Plate
Desking Worksurface Grommet
Support: Legs, Semi-Supported Leg, Frame Leg, or Storage (Supported and Hang-On) are not included; must be ordered separately
Worksurface Suspended Modesty Panel
2
3
4
5
89
7
6
1
modular desks
expansion desking application guide – May 28, 2018
desk components for w/r/s basics (continued)
W/R/S Rectangular Worksurfaces (RTLVL and RTLVC)• Worksurface dimensions listed
are actual dimensions of the finished product
• Connected to W/R/S Frame with W/R/S-Mounted Worksurface Brackets at one end and Legs, Semi-Supported Leg, Frame Leg, or Storage (Supported and Hang-On) at the other end
• Two worksurfaces can be connected with flush plates (included with worksurfaces) to maintain stability
• Grain direction varies depending on the worksurface specified; see page 62
W/R/S-Mounted Worksurface Brackets (RAVB)• Connects worksurface to the
W/R/S Frame
• Must be directly installed on the worksurface-level Horizontal Rail and connected to another worksurface
• Two positions are allowed:
– 1/8" gap prevents access to wires under the worksurface
– 1" gap provides openings for electrical wiring and communication cables under the worksurface
• Finished in Platinum
1/8"
1"
42" to 60" w
42" to 84" w
20", 24", 30" d
modular desks
expansion desking application guide – May 28, 2018
desk components for w/r/s basics (continued)
Semi-Supported Leg – Solid (RAVG)• Supports the end or the side
of a worksurface to maintain stability
• Can be specified full width or shorter
• A 4" minimum clearance is required between the gable and the W/R/S Frame to open the Electrical Pass-Through Baseboard . For easy access, use a 6" clearance
Worksurface Suspended Modesty Panel (REVL, REVO, REVG)• Can be installed under W/R/S
Rectangular Worksurfaces (RTLVL and RTLVC)
• Width of modesty panel specified depends on support selected; see on page 91
• A 4" minimum clearance is required between the modesty panel and the W/R/S Frame to open the Electrical Pass-Through Baseboard . For easy access, use a 6" clearance
4" minimum clearance
4" minimum clearance
14", 18", 20", 24", 30" d
30"to 84" w
modular desks
expansion desking application guide – May 28, 2018
desk components for w/r/s basics (continued)
Support Applications• Five types of support can be
used under W/R/S Rectangular Worksurfaces
– Legs (three styles available) – Hang-On Storage
(with Hang-On Kit) – Storage
(with Hang-On or Supported Pedestal Kit)
– Semi-Supported Leg (RAVG) – Frame Leg (RWWF,
RWWO)• Storage must be installed
with Supported Pedestal Kit (RBXSK) or Hang-On Kit (RBXHK), which must be ordered separately . For details, refer to the Freestanding Storage section
Linear Leg
2" Post Leg – Adjustable
Angled Leg • A 4" minimum clearance is
required between the pedestal and the W/R/S Frame to open the Electrical Pass-Through Baseboard . For easy access, use a 6" clearance
4" minimum clearance
24" to 32" floor to top of finished
worksurface (this leg only)
29" to 32" floor to top of finished
worksurface (All others)
modular desks
expansion desking application guide – May 28, 2018
expansion desking on w/r/s – typical workstations
The end of a W/R/S Rectangular Worksurface must always be supported
perpendicular worksurface applications
• Modesty Panel is not required for structural stability
parallel worksurface applications
• A support must be installed at each end to maintain stability
• A support must be installed at each end and at every 84"
• Worksurfaces less than 84" wide can be connected with linking plates
84" 84"
Linking Plates
modular desks
expansion desking application guide – May 28, 2018
expansion desking on w/r/s – typical workstations (continued)
‘L' configuration workstation applications
• For a 'L' configuration workstation, the maximum span is 84"
• To allow opening the Electrical Pass-Through Baseboard, the Semi-Supported Leg and Modesty Panel must be specified shorter
'U' configuration workstation applications
14" deep Semi-Supported Leg
84" max.
96" max.
• For a 'U' configuration workstation, the maximum span is 96"
• The middle worksurface must be supported with a 14" deep Semi-Supported Leg centered under the worksurface
Semi-Supported Leg
• To allow opening the Electrical Pass -Through Baseboard, a 14" deep Semi-Supported Leg must be installed flush-front with worksurface
• A Semi-Supported Leg can also be connected to the flush-rear of a worksurface to provide stability with knee clearance
Gap
modular desks
expansion desking application guide – May 28, 2018
desk finishes
All Laminate components are protected with a solid plastic edge
Desks and related parts are available in a wide variety of finish colors. Finish codes must be included in the order.
Worksurface Keyboard Support MechanismsFinished in Black
All WorksurfacesAvailable in Foundation Laminate colors or Flintwood (No Cathedral)
Edge Trims• Available in Straight Trim (6) or Flintwood Flat Trim (9)
• Flintwood Flat Trim is only available on Flintwood worksurfaces . Edge trims will be finished to match the Flintwood worksurface
• Straight Trim is not available on Flintwood worksurfaces
Worksurface Keyboard SupportsAvailable in Foundation Laminate colors or Flintwood (No Cathedral)
Fixed-Height Solid End Gables and Semi-Supported Leg• Available in Source Laminate colors
• Corner Posts and Structural Beams will match the color of end gables
Fixed-Height and Height-Adjustable Metal End Gables• Available in Foundation or Mica colors
• Corner Posts and Structural Beams will match the color of end gables
Fixed-Height and Height-Adjustable Full Metal C-Legs• Available in Foundation or Mica colors
• Corner Posts and Structural Beams will match the color of Metal C-Legs
modular desks
expansion desking application guide – May 28, 2018
Flintwood Work. Finish Closest Match for Grommet Finish
Code Color Code Color Finish Style FX Flax 3J Flax Reflect Source FN Natural Pecan 3K Pecan Reflect Source FM Medium Sycamore XH Cherry Source FC Chianti XF Chianti Source FD Dark Walnut XE Dark Walnut Source NR Sierra Flint XQ Walnut Cathedralgrain Source NT Cocoa Brown Flint 3N Cocoa Brown Reflect Source VA Sycamore 3P Sycamore Reflect Source VB Black Walnut DA Espresso Source VZ Blonde Maple XN* Nevada Source 5N White Oak 3F Campus Oak Source 5P Poppy Seed 3W Slate Source 5Q Harvest Cherry 3E Estate Cherry Source 5R Earl Grey R Bronze Foundation 5S Silverwash 3V Earth Source 5T White Truffle XN* Nevada Source 5V Caraway 3V Earth Source 5W Drift Oak 3U Sand Source 5Z American Walnut XQ Walnut Cathedralgrain Source
desk finishes (continued)All Desking Grommets (RAG)• Available in Source Laminate, Foundation and Mica colors
• Worksurface grommets match with a Flintwood worksurface finish or with a Foundation Laminate finish whenever a corresponding match is available in Source Laminate colors . Otherwise worksurface grommets match with the gable finish
• Grommets on modesty panels will match the panel finish
Levelers Finished in Black
Solid Modesty Panels (RDML, RAML, REML and REVL)Available in Source Laminate colors
Metal Modesty Panels (RDMO, RAMO, REMO and REVO)Available in Foundation or Mica colors
Glass Modesty Panels (REVG)Available in 1/4" (6 mm) Standard or Back-Painted tempered glass
Standard glass finish: – Frosted (FT)
LegsAvailable in Foundation or Mica colors
* This match suggestion is not close enough to be considered as tone on tone
modular desks
expansion desking application guide – May 28, 2018
grain direction / user edge
RUDR, RUDS, RUDD or RNDWR, RNDRR, RNDWS, RNDRS
RKDS RKXD
RDSD RDSK RVUR, RVUS or RVUD
RDKR, RDKS or RDKD
RDBN or RDBU
RQMBRHMB
RTRT
RTSQ RTCI RTEL
RTSR
RTCD
RVDK RVXD RDPD
RDAR
RVSS or RVSD
RKSS
RVRD
RVXKDRVND
RVWR, RVWS or RVWD
RVDD
RDRR, RDRS, or RDRD
RURR, RURS, RURD or RNRWR, RNRRR, RNRWS, RNRRS
RDFS or RDFD
RDUR, RDUS or RDUD
RTLDL RTLDC
RJRR, RJRS or RJRD
RJUS or RJUD
RDRP
RTLVCRTLVL
EXCEPTION
24"24" or 30"
57" to 84"
84"24" x 84" Flintwood only
laminate worksurface grain/pattern direction
• Grain direction is an important factor when planning workstation, if a different grain direction is required, please contact your Teknion Customer Service Representative
• Shading indicates user edge
modular desks
expansion desking application guide – May 28, 2018
grain direction / user edge (continued)
Flush-Mounted Modesty Panel
Suspended Modesty Panel
Full Gable
Inset Modesty Panel
Half Gable
Semi-Supported Leg
Worksurface Suspended Modesty Panel
laminate worksurface grain/pattern direction (continued)
flintwood worksurface grain/pattern direction
• There is no user edge so care must be taken during installation to match grain/pattern direction• Grain/patterns are not "centered" on worksurface• Applies to Flintwood (Standard)
Grain Direction Grain Direction
User Edge User Edge
Grain Direction Grain Direction
= Grain Direction =
= Grain Direction =Laminate =
User Edge User Edge
• Grain direction will appear in the same direction, from side to side worksurface
User Edge User Edge
Flintwood =
User Edge
Right HandedLeft Handed
User Edge
• Regardless of worksurface handedness, grain direction from left to right from the user's perspective
The pattern direction of Laminate is not "centered" and grain direction can appear in different direction from side-to-side worksurface
spine desks