04-configuring equipment.pdf

OptiX iManager T2000 Operation Manual for SDH Contents

Huawei Technologies Proprietary

i

Contents

4 Configuring Equipment 4-1

4.1 Creating and Viewing Physical Location Information 4-2

4.1.1 Creating and Viewing Equipment Room Information 4-2

4.1.2 Creating and Viewing Cabinet Information 4-3

4.1.3 Modifying and Viewing Subrack Information 4-4

4.2 Viewing NE Resource 4-6

4.3 Uploading Data if NE has been Configured 4-7

4.3.1 Uploading/Downloading NE Configuration Data 4-7

4.3.2 Checking Configuration Data Consistency Between NE and the T2000 4-8

4.4 Duplicating NE Configuration Data 4-10

4.5 Manually Configuring NE Data 4-12

4.6 Creating Unit 4-13

4.7 Deleting Unit 4-14

4.8 Viewing Unit Version 4-15

4.9 Creating and Viewing Physical Location Information 4-16

4.9.1 Creating and Viewing Equipment Room Information 4-16

4.9.2 Creating and Viewing Cabinet Information 4-17

4.9.3 Modifying and Viewing Subrack Information 4-18

4.10 Viewing NE Hardware Information 4-20

OptiX iManager T2000 Operation Manual for SDH 4 Configuring Equipment


4-1

4 Configuring Equipment

This chapter introduces how to configure equipment in the T2000.

The following tasks are described:

Creating and Viewing Physical Location Information

Viewing NE Resource



4-2

Uploading Data if NE has been Configured

Duplicating NE Configuration Data

Manually Configuring NE Data

Creating Unit

Deleting Unit

Viewing Unit Version

Creating and Viewing Physical Location Information

Viewing NE Hardware Information



4-3

4.1 Creating and Viewing Physical Location Information

4.1.1 Creating and Viewing Equipment Room Information

Purpose

Use this procedure to create/view the physical location information of the equipment room.

Prerequisites

NE has been configured.

NM user with the authority of "system maintainer" or above.

Procedure

Step Action 1 Select [Configuration/Common Configuration/Physical Location

Information] from the Main Menu. Select the tab “Equipment Room”.

2 Click <Query> to view the information.

3 Click <Create>, the “Create Equipment Room” dialog box is displayed.

4 Select the tab “Basic Attributes” and enter attributes of the equipment room.



4-4

Step Action 5 Select the tab “Object Selection” and select the available object

from the list on the left. Click the double-right-arrow button (red) and then <OK>.

6 If you want to print the information, click <Print> to output the information displayed in the interface to a page (in the form of a list). Choose to print or save it in the network browser.

7 If you want to save the information, click <Save as> to select and save the information you need.

8 If you want to modify or delete the information, right-click on the information and select “Modify” or “Delete”.

4.1.2 Creating and Viewing Cabinet Information

Purpose

Use this procedure to create/view the physical location information of the cabinet.

Prerequisites



Procedure


Information] from the Main Menu. Select the tab “Cabinet”.


3 Click <Create>, the “Create Cabinet” dialog box is displayed.



4-5

Step Action 4 Select the tab “Basic Attributes” and enter attributes of the cabinet.

5 Select the tab “Object Selection” and select the available object from the list on the left. Click the double-right-arrow button (red) and then <OK>.




4.1.3 Modifying and Viewing Subrack Information

Purpose

Use this procedure to modify/view the physical location information of the subrack.

Prerequisites





4-6

Procedure


Information] from the Main Menu. Select the tab “Subrack”.


3 Right-click on the information and select “Modify”. The “Set Subrack Attributes” dialog box is displayed.

4 Set the attributes and click <OK>.





4-7

4.2 Viewing NE Resource

Purpose

Use this procedure to view the resource information of an NE, including NE name, type, ID, extended ID, number of fibers, subnet belonged, gateway type and gateway attribute.

Prerequisite


Procedure

Step Action 1 Select [Configuration/Common Configuration/NE Hardware

Information] from the Main Menu. Select the tab "View NE Resources".

2 Select the NE to be viewed from the NE list, and click double-right-arrow button (red).

3 Click <Refresh> to refresh the information.





4-8

4.3 Uploading Data if NE has been Configured

4.3.1 Uploading/Downloading NE Configuration Data

Purpose

Use this procedure to upload (or download) configuration data during configuration or modification.

The NE configuration data in the T2000 database may be different from that on NE. If the network is expected to run as the configuration data in the T2000 database, download them to NEs. If the network and its services run normally, you can upload the data to the T2000. Check the consistency of configuration data again after uploading or downloading them.

Prerequisite


Procedure

Step Action 1 Select [Configuration/Configuration Data

Management/Configuration Data Upload/Download].

Or, select [Maintenance/Configuration Data Management/NE Configuration Data Management] from the navigation tree of the Equipment Maintenance Console.

2 In the lower-left pane, select the appropriate NEs and click the double-right-arrow button (red).

3 Select one or more NEs in the NE Data List.

4 Right-click the NE and select [Upload] or [Download].

5 Click <OK> to confirm the operation.



4-9

4.3.2 Checking Configuration Data Consistency Between NE and the T2000

Purpose

Use this procedure to check whether the T2000 configuration data and the NE configuration are consistent.

The configuration data in NEs and in the T2000 database is compared in this task and a report of consistency is created. According to the report and actual reliability of configuration data, uploading or downloading configuration data is selected to implement.

This task will not change the configuration data in NEs and the T2000 database and it is recommended to run this function periodically to keep the consistency of configuration data in NEs and the T2000 server.

Prerequisite


Procedure


Management/Configuration Data Consistency Check].


2 In the lower-left pane, select the appropriate NEs and click the double-right-arrow button (red).

3 Select one or more NEs to check in the NE Data List.

4 Right-click the NE and select [Consistency Check].



4-10

Step Action 5 Click <OK> to confirm the consistency check.

Note:

If the check result shows the modules with the configuration data inconsistent, you should solve the problem by re-uploading or re-downloading the configuration data as required in practice.



4-11

4.4 Duplicating NE Configuration Data

Purpose

NEs can be configured in batches by copying the configuration data of other NEs. Actually, this is a fast and effective method to configure new NEs and it is commonly used.

Prerequisite


Procedure


Management/Configuration Data Duplication].


2 In the lower-left pane, select the configured NEs and unconfigured NEs, and then click the double-right-arrow button (red).

3 Right-click a configured NE as a template in the NE Data List and select [Copy].



4-12

Step Action 4 Select one or more unconfigured NEs to be duplicated in the NE

Data List. Right-click the NE and select [Paste].

5 Click <OK>.



4-13

4.5 Manually Configuring NE Data

Purpose

Use this procedure to create/delete expanded subrack and units manually.

This method applies to the situation that data has not been configured on the NM side.

Prerequisite


Procedure

Step Action 1 Double-click the NE icon in the Main Topology. The “NE

Configuration Wizard” dialog box is displayed.

2 Select “Manual Configuration” and click “Next”.

3 The “Confirm” dialog box is displayed. Click <OK>. The “NE Configuration Wizard” dialog box is displayed.

4 Set the NE attributes and click <Next>. The NE panel is displayed.

5 Right-click the slot and select the unit type.

6 After all the units have been created, click <Next>. Then, click <Finish>.



4-14

4.6 Creating Unit

Purpose

Use this procedure to add units to the SDH NE.

Prerequisites



Procedure

Step Action 1 Double-click the NE in the Main Topology. The NE Panel is

displayed.

2 Right-click the slot to be provisioned. Select the appropriate unit type.

Note:

Within each slot the left indicator shows the summary status. If all is okay, it is displayed in green. It will be displayed in red if at least one CR alarm detected. It will be displayed in orange if at least one MJ alarm detected and no CR alarm. It will be displayed in yellow if at least one MN alarm detected and no CR or MJ alarm.



4-15

4.7 Deleting Unit

Purpose

Use this procedure to delete units from the NE.

Prerequisite


Procedure

Step Action 1 Double-click the NE in the Main Topology. The NE Panel is

displayed.

2 Right-click the unit to be deleted. Select [Delete Board].

Note:

If cross-connect service exists in this unit, the operation result dialog box is displayed and this unit will not be deleted.



4-16

4.8 Viewing Unit Version

Purpose

Use this procedure to view the unit version information of an NE, including BIOS version, software version, and logic version.

Prerequisite


Procedure

Step Action 1 Select [Configuration/Common Configuration/Board Version

Information] from the Main Menu. Click the tab "View Version".

2 Select the NE and click double-right-arrow button (red).

3 Click <Query> to query the information from the NE side.





4-17

4.9 Creating and Viewing Physical Location Information

4.9.1 Creating and Viewing Equipment Room Information

Purpose

Use this procedure to create/view the physical location information of the equipment room.

Prerequisites



Procedure


Information] from the Main Menu. Select the tab “Equipment Room”.


3 Click <Create>, the “Create Equipment Room” dialog box is displayed.

4 Select the tab “Basic Attributes” and enter attributes of the equipment room.



4-18

Step Action 5 Select the tab “Object Selection” and select the available object

from the list on the left. Click the double-right-arrow button (red) and then <OK>.




4.9.2 Creating and Viewing Cabinet Information

Purpose

Use this procedure to create/view the physical location information of the cabinet.

Prerequisites



Procedure


Information] from the Main Menu. Select the tab “Cabinet”.


3 Click <Create>, the “Create Cabinet” dialog box is displayed.



4-19

Step Action 4 Select the tab “Basic Attributes” and enter attributes of the cabinet.

5 Select the tab “Object Selection” and select the available object from the list on the left. Click the double-right-arrow button (red) and then <OK>.




4.9.3 Modifying and Viewing Subrack Information

Purpose

Use this procedure to modify/view the physical location information of the subrack.

Prerequisites





4-20

Procedure


Information] from the Main Menu. Select the tab “Subrack”.


3 Right-click on the information and select “Modify”. The “Set Subrack Attributes” dialog box is displayed.

4 Set the attributes and click <OK>.





4-21

4.10 Viewing NE Hardware Information

Purpose

Use this procedure to view the NE hardware information, including NE resources, unit resources, WDM subrack resources and unit resource statistics.

Prerequisite


Procedure

Step Action 1 Select [Configuration/Common Configuration/NE Hardware

Information] from the Main Menu.

2 Select the tab corresponding to the information to be viewed. Select the NE and click the double-right-arrow button (red).

3 Click <Refresh> to view the information.

4 If you want to print the information, click <Print> to output the information displayed in the interface to a page in the form of a list and choose to print or save it in the network browser.


04-configuring equipment.pdf

Documents