008364-001-ds-i001 dehydration switching valves datasheet _ rev b
TRANSCRIPT
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
1/17
Doc. No: 008364-001-DS-I001
AE Job No.: 008364-001
Client AFE:
Rev. No.: B
Rev. Date: 5/29/2012
File No.: 008364-001-30.04
By: Date:
Initiator: MCM 5/29/2012
Checker: JD 5/29/2012
Mechanical:
Structural: Rev. Date By Approved Purpose
Electrical: B 3/107/11 MCM JD ISSUE FOR RFQ
Instrument:
Proj Mgr.: GJM
Other:
Client:
Audubon Project No.: 008364
SWITCHING VALVE DATASHEETS
Client AFE: 747
FOR
HOWARD ENERGY PARTNERS200 MMSCFD HIGH ETHANE RECOVERY CRYO UNIT
10205 Westheimer, Suite 600
Houston TX 77042
TX Reg. No. 8696 Exp. Date 5/31/2012
P.E. Name:
RegistrationNo.:This Document is solely for the use of the contractual client and Audubon Engineering.
Audubon Engineering assumes no liability to any other party for any representations contained in this Document.
Engineering Seal Approvals (Initial Release)
Original Seal Copy on File
Revisions
InstrumentDatasheetforSwitchingValves
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
2/17
PROJ. NO. 008364-001
CONTRACTOR: AUDUBON ENGINEERING
UNIT NAME: 200 MMSCFD HIGH ETHANE RECOVERY CRYO PLANT
LOCATION: FREER, TEXASDOCUMENT: 008364-001-DS-I001
1. GENERAL INSTRUCTIONS FOR SWITCHING VALVES
Valve assembly to be furnished in accordance with the following documents:
a. 008364-TS-M001 - Functional Specification
b. 008364-SG-M001 General Facility Piping and Valve Specification
c. 008364-SG-M015 - General Specification - Painting, Galvanizing and Coatings
Vendor shall comply with attached applicable specification (s). Any exceptions shall be clearly stated in the quote.
All equipment shall be suitable for Class 1 Division 2, Group C&D.
Vendor shall provide a corrosion resistant, weatherproof limit switch assembly affixed to the valve with position indicator,
and switches as indicated on the specification sheet.
Vendor to supply 4-way dual coil S.S solenoid valves that are explosion proof, molded-type, heavy duty coil. The
solenoid valve wiring shall be terminated in the limit switch termination box.
Switching valves shall be of the "Firesafe" design, and tested in accordance to API 6D
Switching valves shall have the shut-off class designated on line 17 of the data sheet.
Vendor shall provide complete documents listed in the "Vendor Data Requirement" form attached with the quote inquiry.
Vendor shall supply each valve with a permanently attached stamped stainless steel tag including valve tag number,
manufactures name, valve serial number, maximum body pressure, and body material.
All air supply tubing shall be 304 SS seamless with 0.035" wall thickness, and a minimum of O.D of 3/8"
Vendor shall provide protection adequate for shipment and storage of instruments. All openings and exposed parts shall
be protected so as to prevent debris from entering. All flanges and threaded connections shall be protected against
damage using wood, steel, and/or plastic protectors.
2. SITE CONDITIONS
Plant Location: FREER, Texas
Site Elevation : 800 Feet above mean sea level.
Atmospheric Pressure 14.7 PSIA
Design Ambient Air Temperature 100oF
2.5 Maximum Ambient Air Temperature 108oF
Design Wind Speed 100 MPH
Average Rainfall 38.6 Inches/ Year
Design Seismic Risk Level N/A
52
53
54
55
56
1.2
SWITCHING VALVE DATASHEETS
1.1
2.3
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
2.1
2.2
NOTES
App vd
2.4
2.6
2.7
2.8
Rev Date Description Orig Chk
B 05/29/12 ISSUE FOR RFQ BMM MCM JD
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
3/17
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
4/17
SwitchingValveDataSheet
1
2
3
4
5
6
78
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27 24 VDC CONTINOUS DUTY 316 S.S., NEMA 4X/7/9
28
29 Energize to Open/Close Valve
30
31 Limit Switch Tag Number
32
33
34
35
36
37
38
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53Notes:
B BMM MCM 3/7/2011
By Chkd Date 3 of 16
1100 psigOperating Pressure Design Pressure
Cp/Cv Z-Correction factor 1.206 0.8714
GENERAL
VALVE BODY
Valve Code Number
KCV-401A
MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
ORBIT #####
Location
12 INCH
DEHYDRATION SKID
CLASS I, DIV 2, GROUPS C & D
SS SEAT
17-4PH SS
Graphite
2 sec per 1" of valve size
FLANGED
PURCHASE
ACTUATOR
Fluid
115 MMSCFD
BY VENDOR
ANSI V
Vendor supplies actuator sizing & speed calculation
VGG-4322-U-55F-DO24
Outlet
Unit
Valve Cv
State
0.15 psi (OPEN) / 50 psi (CLOSE)
Solenoid Tag Number
Fireproofing
Model Number
Actuator Form
Speed to close valve
Actuator Type
Size
DOUBLE ACTING CYLINDER
JD Dwg. No.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
ELECTRICAL
CONNECTIONS
Solenoid Valve Number
Line Material
Issue for RFQ KCV-401A AEC Job No: 008364-001
INSTRUMENT
SPECIFICATION
Price
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
Natural Gas
12" / schedule 80
SPL @ dba
Carbon Steel A105
12" / schedule 80
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
Revision
Design Temperature
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE)
Appr
Model
2. VERSA VGG-4322-U. Solenoid to have dual coils. Brass Bleed Valve: BC-3, 2 Per Solenoid.
Vendor
Purchase Order Number
Test Catagory
Doc. No: 008364-001-DS-I001 Sheet
PROCESS DATA
595 F
85 Dba Maximum
API 6D
Maximum Flow Rate
Calculated Cv
600 # ANSI
CS
Tag Number
Service
Equipment Number
Contract Number
Line Number
Plug/Ball
Body
Body Size
Material
Area Classification
Body Form
Connections Rating
Seat/Seal
12"-PG-D-00##-1" H(PP)P&ID Number TBD
WCC/NICKEL FACE
Enclosure
Pneumatic - Rising Stem
CL I, DIV 2, GRP C & D
ORBIT ######
Ex Proof, Cls I, Div 2, Group C & D
No
4 WAY - DUAL COIL (Note 2)Solenoid Valve Type
Ingress Protection
Action on Power Failure
Electrical Protection
KY-401A (SEE LINE 53)
N/A
FAIL LAST POSITION FAIL LAST POSITIONAction on Air Failure
Leakage Class
V-401
RISING STEM BALL- RED. PORT
120F ADSORPTION / 550 F REGENERATION
1/2" NPT
Process Gas
Gas
Torques (IN-LBS) Break/ Run / Reset
BY VENDOR
Operating Temperature
Additional Components
Control Cable Conduit
Air Filtered Regulator with Pressure Gauges
Input Signal/Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch)
Air Supply Actuator Sizing 80-100 psig Air Supply 80 PSIG
Stem
Packing
942 psig
BY VENDOR
Viscosity Molecular Weight 0.01370 CP 18.5
Fluid Type
Body Material
Manufacturer TOPWORX DXP-L21XNMB
Single or Double DoubleCoil Operation
Style of coil
Action on Loss of Power FAIL LAST POSITION
ZSC-401A / ZSO-401A
Manufacturer CAMERON - ORBIT
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
5/17
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
6/17
SwitchingValveDataSheet
1
2
3
4
56
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27 24 VDC CONTINOUS DUTY 316 S.S., NEMA 4X/7/9
28
29 Energize to Open/Close Valve
30
31 Limit Switch Tag Number
32
33
34
35
36
37
3839
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 5 of 16Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-402A AEC Job No: 008364-001
INSTRUMENT
SPECIFICATION
2. VERSA VGG-4322-U. Solenoid to have dual coils. Brass Bleed Valve: BC-3, 2 Per Solenoid.3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number VGG-4322-U-55F-DO24
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
0.8714
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Outlet 12" / schedule 80 12" / schedule 80
Line Material Carbon Steel A105
Maximum Flow Rate Unit 115 MMSCFD
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Pressure
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Viscosity Molecular Weight 0.01370 CP 18.5
Design Pressure 942 psig 1100 psig
Operating Temperature 120F ADSORPTION / 550 F REGENERATIONCp/Cv Z-Correction factor 1.206
Enclosure Ex Proof, Cls I, Div 2, Group C & D
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-402A / ZSO-402A TOPWORX DXP-L21XNMB
Input Signal/Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch)
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
Body Material
Action on Loss of Power FAIL LAST POSITION
Coil Operation Single or Double Double
Fireproofing No
Solenoid Valve Type Solenoid Tag Number 4 WAY - DUAL COIL (Note 2) KY-402A (SEE LINE 53)
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size
Air Supply Actuator Sizing 80-100 psig Air Supply 80 PSIG
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Style of coil
SS SEAT
Plug/Ball WCC/NICKEL FACE
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Rating FLANGED 600 # ANSI
Material Body CS
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 12 INCH RISING STEM BALL- RED. PORT
Connections
Stem 17-4PH SS
Packing Graphite
Seat/Seal
V-402
Contract NumberLocation DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-402A
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 12"-PG-D-00##-1" H(PP) TBD
Equipment Number
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
7/17
SwitchingValveDataSheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2324
25
26
27
28
29
30
31 Limit Switch Tag Number
32
33
34
35
36
3738
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 6 of 16
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 12 INCH RISING STEM BALL- RED.P
Graphite
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Plug/Ball WCC/NICKEL FACE
17-4PH SS
V-402
Contract Number
Location DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-402C
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 12"-PG-D-00##-1" H(PP) TBD
Equipment Number
Coil Operation
Material Body
SS SEAT
Connections Rating FLANGED 600 # ANSI
CS
Seat/Seal
Air Supply Actuator Sizing 80-100 psig Air Supply 80 PSIG
Body Material
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
Fireproofing No
Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Action on Loss of Power
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-402C / ZSO-402C TOPWORX DXP-L21XNMB
Input Signal/Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Temperature
Viscosity Molecular Weight 0.01377 CP 18.5
Outlet 12" / schedule 80 12" / schedule 80
120F ADSORPTION / 550 F REGENERATION
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Line Material Carbon Steel A105
Maximum Flow Rate Unit 115 MMSCFD
2. Deleted
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
008364-001
INSTRUMENT
SPECIFICATION
Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-402C AEC Job No:
Cp/Cv Z-Correction factor 1.206 0.8708
Stem
Packing
Operating Pressure Design Pressure 947 psig 1100 psig
Single or Double Double
Enclosure Ex Proof, Cls I, Div 2, Group C & D
Solenoid Valve Type Solenoid Tag Number
Style of coil
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
8/17
SwitchingValveDataSheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2324
25
26
27 24 VDC CONTINOUS DUTY 316 S.S., NEMA 4X/7/9
28
29 Energize to Open/Close Valve
30
31 Limit Switch Tag Number
32
33
34
35
36
3738
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 7 of 16
80-100 psig Air Supply 80 PSIG
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 12 INCH RISING STEM BALL- RED. PORT
Graphite
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Plug/Ball WCC/NICKEL FACE
17-4PH SS
V-403
Contract Number
Location DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-403A
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 12"-PG-D-00##-1" H(PP) TBD
Equipment Number
Material Body
SS SEAT
Connections Rating FLANGED 600 # ANSI
CS
Seat/Seal
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
Fireproofing No
Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Action on Loss of Power FAIL LAST POSITION
Coil Operation
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-403A / ZSO-403A TOPWORX DXP-L21XNMB
Input Signal/Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch)
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Temperature
Viscosity Molecular Weight 0.01370 CP 18.5
Outlet 12" / schedule 80 12" / schedule 80
120F ADSORPTION / 550 F REGENERATION
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Line Material Carbon Steel A105
Maximum Flow Rate Unit 115 MMSCFD
2. VERSA VGG-4322-U. Solenoid to have dual coils. Brass Bleed Valve: BC-3, 2 Per Solenoid.
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number VGG-4322-U-55F-DO24
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
008364-001
INSTRUMENT
SPECIFICATION
Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-403A AEC Job No:
Stem
Packing
Operating Pressure Design Pressure 942 psig 1100 psig
Cp/Cv Z-Correction factor 1.206 0.8714
Single or Double Double
Enclosure Ex Proof, Cls I, Div 2, Group C & D
Solenoid Valve Type Solenoid Tag Number 4 WAY - DUAL COIL (Note 2) KY-403A (SEE LINE 53)
Style of coil Body Material
Air Supply Actuator Sizing
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
9/17
SwitchingValveDataSheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2324
25
26
27
28
29
30
31 Limit Switch Tag Number
32
33
34
35
36
3738
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 8 of 16
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 12 INCH RISING STEM BALL- RED. PORT
Graphite
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Plug/Ball WCC/NICKEL FACE
17-4PH SS
V-403
Contract Number
Location DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-403C
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 12"-PG-D-00##-1" H(PP) TBD
Equipment Number
Coil Operation
Material Body
SS SEAT
Connections Rating FLANGED 600 # ANSI
CS
Seat/Seal
Air Supply Actuator Sizing 80-100 psig Air Supply 80 PSIG
Body Material
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
Fireproofing No
Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Action on Loss of Power
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-403C / ZSO-403C TOPWORX DXP-L21XNMB
Input Signal /Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Temperature
Viscosity Molecular Weight 0.01377 CP 18.5
Outlet 12" / schedule 80 12" / schedule 80
120F ADSORPTION / 550 F REGENERATION
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Line Material Carbon Steel A105
Maximum Flow Rate Unit 115 MMSCFD
2. Deleted
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
008364-001
INSTRUMENT
SPECIFICATION
Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-403C AEC Job No:
Cp/Cv Z-Correction factor 1.206 0.8708
Stem
Packing
Operating Pressure Design Pressure 947 psig 1100 psig
Single or Double Double
Enclosure Ex Proof, Cls I, Div 2, Group C & D
Solenoid Valve Type Solenoid Tag Number
Style of coil
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
10/17
SwitchingValveDataSheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2324
25
26
27 24 VDC CONTINOUS DUTY 316 S.S., NEMA 4X/7/9
28
29 Energize to Open/Close Valve
30
31 Limit Switch Tag Number
32
33
34
35
36
3738
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 9 of 16
80-100 psig Air Supply 80 PSIG
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 6 INCH RISING STEM BALL- RED. PORT
Graphite
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Plug/Ball WCC/NICKEL FACE
17-4PH SS
V-401
Contract Number
Location DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-401B
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 6"-PG-D-00##-1" H(PP) TBD
Equipment Number
Material Body
SS SEAT
Connections Rating FLANGED 600 # ANSI
CS
Seat/Seal
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
Fireproofing No
Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Action on Loss of Power FAIL LAST POSITION
Coil Operation
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-401B / ZSO-401B TOPWORX DXP-L21XNMB
Input Signal/Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch)
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Temperature
Viscosity Molecular Weight 0.01940 CP 18.5
Outlet 6" / schedule 80 6" / schedule 80
120F ADSORPTION / 550 F REGENERATION
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Line Material Carbon Steel A105
Maximum Flow Rate Unit 11.55 MMSCFD
2. VERSA VGG-4322-U. Solenoid to have dual coils. Brass Bleed Valve: BC-3, 2 Per Solenoid.
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number VGG-4322-U-55F-DO24
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
008364-001
INSTRUMENT
SPECIFICATION
Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-401B AEC Job No:
Stem
Packing
Operating Pressure Design Pressure 929 psig 1100 psig
Cp/Cv Z-Correction factor 1.204 0.9979
Single or Double Double
Enclosure Ex Proof, Cls I, Div 2, Group C & D
Solenoid Valve Type Solenoid Tag Number 4 WAY - DUAL COIL (Note 2) KY-401B (SEE LINE 53)
Style of coil Body Material
Air Supply Actuator Sizing
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
11/17
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
12/17
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
13/17
SwitchingValveDataSheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2324
25
26
27
28
29
30
31 Limit Switch Tag Number
32
33
34
35
36
3738
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 12 of 16
80-100 psig Air Supply 80 PSIG
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 6 INCH RISING STEM BALL- RED. PORT
Graphite
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Plug/Ball WCC/NICKEL FACE
17-4PH SS
V-402
Contract Number
Location DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-402D
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 6"-PG-D-00##-1" H(PP) TBD
Equipment Number
Material Body
SS SEAT
Connections Rating FLANGED 600 # ANSI
CS
Seat/Seal
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
Fireproofing No
Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Action on Loss of Power
Coil Operation
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-402D / ZSO-402D TOPWORX DXP-L21XNMB
Input Signal /Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Temperature
Viscosity Molecular Weight 0.01940 CP 18.5
Outlet 6" / schedule 80 6" / schedule 80
120F ADSORPTION / 550 F REGENERATION
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Line Material Carbon Steel A105
Maximum Flow Rate Unit 11.55 MMSCFD
2. VERSA VGG-4322-U. Solenoid to have dual coils. Brass Bleed Valve: BC-3, 2 Per Solenoid.
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
008364-001
INSTRUMENT
SPECIFICATION
Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-402D AEC Job No:
Stem
Packing
Operating Pressure Design Pressure 929 psig 1100 psig
Cp/Cv Z-Correction factor 1.204 0.9979
Single or Double Double
Enclosure Ex Proof, Cls I, Div 2, Group C & D
Solenoid Valve Type Solenoid Tag Number
Style of coil Body Material
Air Supply Actuator Sizing
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
14/17
SwitchingValveDataSheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2324
25
26
27 24 VDC CONTINOUS DUTY 316 S.S., NEMA 4X/7/9
28
29 Energize to Open/Close Valve
30
31 Limit Switch Tag Number
32
33
34
35
36
3738
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 13 of 16
80-100 psig Air Supply 80 PSIG
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 6 INCH RISING STEM BALL- RED. PORT
Graphite
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Plug/Ball WCC/NICKEL FACE
17-4PH SS
V-403
Contract Number
Location DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-403B
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 6"-PG-D-00##-1" H(PP) TBD
Equipment Number
Material Body
SS SEAT
Connections Rating FLANGED 600 # ANSI
CS
Seat/Seal
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
Fireproofing No
Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Action on Loss of Power FAIL LAST POSITION
Coil Operation
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-403B / ZSO-403B TOPWORX DXP-L21XNMB
Input Signal/Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch)
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Temperature
Viscosity Molecular Weight 0.01940 CP 18.5
Outlet 6" / schedule 80 6" / schedule 80
120F ADSORPTION / 550 F REGENERATION
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Line Material Carbon Steel A105
Maximum Flow Rate Unit 11.55 MMSCFD
2. VERSA VGG-4322-U. Solenoid to have dual coils. Brass Bleed Valve: BC-3, 2 Per Solenoid.
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number VGG-4322-U-55F-DO24
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
008364-001
INSTRUMENT
SPECIFICATION
Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-403B AEC Job No:
Stem
Packing
Operating Pressure Design Pressure 929 psig 1100 psig
Cp/Cv Z-Correction factor 1.204 0.9979
Single or Double Double
Enclosure Ex Proof, Cls I, Div 2, Group C & D
Solenoid Valve Type Solenoid Tag Number 4 WAY - DUAL COIL (Note 2) KY-403B (SEE LINE 53)
Style of coil Body Material
Air Supply Actuator Sizing
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
15/17
SwitchingValveDataSheet
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
2324
25
26
27
28
29
30
31 Limit Switch Tag Number
32
33
34
35
36
3738
39
40
41
42
43 Line Size and Sch. Inlet
44
45
46
47
48
49
50
51
52
53
Notes:
B BMM MCM 3/7/2011
No. By Chkd Date 14 of 16
80-100 psig Air Supply 80 PSIG
VALVE BODY
Valve Code Number ORBIT #####
Body Size Body Form 6 INCH RISING STEM BALL- RED. PORT
Graphite
Leakage Class ANSI V
Torques (IN-LBS) Break/ Run / Reset Vendor supplies actuator sizing & speed calculation
Plug/Ball WCC/NICKEL FACE
17-4PH SS
V-403
Contract Number
Location DEHYDRATION SKID
Area Classification CLASS I, DIV 2, GROUPS C & D
GENERAL
Tag Number KCV-403D
Service MOL SIEVE DEHY SWITCHING VALVE, INLET GAS
Line Number P&ID Number 6"-PG-D-00##-1" H(PP) TBD
Equipment Number
Material Body
SS SEAT
Connections Rating FLANGED 600 # ANSI
CS
Seat/Seal
ACTUATOR
Model Number Speed to close valve ORBIT ###### 2 sec per 1" of valve size
Size BY VENDOR
Actuator Type Actuator Form DOUBLE ACTING CYLINDER
Action on Air Failure Action on Power Failure FAIL LAST POSITION FAIL LAST POSITION
Fireproofing No
Pneumatic - Rising Stem
Ingress Protection Electrical Protection N/A CL I, DIV 2, GRP C & D
Action on Loss of Power
Coil Operation
ELECTRICAL
CONNECTIONS
Manufacturer ZSC-403D / ZSO-403D TOPWORX DXP-L21XNMB
Input Signal/Switch Type/Contact Rating 24 VDC/HAZARDOUS LOCATION/ 3A @24 VDC (Sealed Switch)
Additional Components Air Filtered Regulator with Pressure Gauges
Control Cable Conduit 1/2" NPT
PROCESS DATA
Fluid Process Gas
Fluid Type State Natural Gas Gas
Operating Temperature
Viscosity Molecular Weight 0.01940 CP 18.5
Outlet 6" / schedule 80 6" / schedule 80
120F ADSORPTION / 550 F REGENERATION
Design Temperature 595 F
Max. Diff. Pressure for Actuator Size (OPEN/CLOSE) 0.15 psi (OPEN) / 50 psi (CLOSE)
Calculated Cv Valve Cv BY VENDOR BY VENDOR
SPL @ dba 85 Dba Maximum
Line Material Carbon Steel A105
Maximum Flow Rate Unit 11.55 MMSCFD
2. VERSA VGG-4322-U. Solenoid to have dual coils. Brass Bleed Valve: BC-3, 2 Per Solenoid.
3. Vendor to provide a SST tag engraved w/ Tag No. Separate Tag w/ Model No, & Serial No, attached directly to valve & w/ SST wire.
4. Vendor to provide the general arrangement, dimensional drawing, and pneumatic schematic diagram.
Test Catagory API 6D
Solenoid Valve Number
1. Vendor to confirm the valve size, actuator size, and valve closing speed.
PURCHASE
Vendor Price
Manufacturer CAMERON - ORBIT
Model
Purchase Order Number
008364-001
INSTRUMENT
SPECIFICATION
Appr Revision Doc. No: 008364-001-DS-I001 Sheet
JD Issue for RFQ Dwg. No. KCV-403D AEC Job No:
Stem
Packing
Operating Pressure Design Pressure 929 psig 1100 psig
Cp/Cv Z-Correction factor 1.204 0.9979
Single or Double Double
Enclosure Ex Proof, Cls I, Div 2, Group C & D
Solenoid Valve Type Solenoid Tag Number
Style of coil Body Material
Air Supply Actuator Sizing
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
16/17
-
8/13/2019 008364-001-DS-I001 Dehydration Switching Valves Datasheet _ Rev B
17/17