· - gibljivi nivelirni vij , pa - fiksni nivelirni vij , pa - gibljivi nivelirni vij , - gibljivi...
TRANSCRIPT
-
NIVELIRNI VIJCINivelirne nogice
Ulošci za cijevi
www.metalika-kacin.comT/F 0 /51 213 060 | [email protected]
Tehnika zatvaranja
-
- gibljivi nivelirni vij , PA
- fiksni nivelirni vij , PA
- gibljivi nivelirni vij ,
- gibljivi nivelirni vij , INOX
- fiksni nivelirni vij ,
- proti vibra za šine
- proti
ci nosa
ci nosa
ci nosa metalni
ci nosa
ci nosa metalni
v cioni vijci ma
vklizni vijci
č
č
č
č
č
PO RNI INIVELIRNI ELEMENTI
TPO
METALIKAKACINTehnika zatvaranja
KACIN METALIKA d.o.o.Vukovarska 7b, 51000 RIJEKA
Tel./fax (00385) 051/ 213-060GSM 091 / 58 707 44
-
Široki izbor potpornih in nivelirnih elemenata za metalne i plastične ormariće, metalna kućišta, vitrine, metalni nameštaj, za upotrebu
kod izrade strojne opreme, za upotrebu u industriji prerade lima i drugo.
• gibljivi nivelirni vijci, nosač PA • fiksni nivelirni vijci, nosač PA • gibljivi nivelirni vijci, nosač metalni • gibljivi nivelirni vijci, nosač INOX • fiksni nivelirni vijci, nosač metalni • protivvibracioni vijci za mašine • protivklizni vijci
MOLIMO TRAŽITE KOD NAS TEHNIČKE KATALOGE I DALJNJE INFORMACIJE
KACIN METALIKA d.o.o., Vukovarska 7b, 51000 RIJEKA TEL / FAX (00 385) 51 213-060
GSM 091 / 58 707 44 [email protected] www.metalika-kacin.com
-
Široki izbor standardnih elemenata za pritezanje i fiksiranje
za metalne ormari e, metalna ku , metalni namje , za upotrebu kod
izrade strojne opreme, za upotrebu u industriji prerade lima i vozila.
ć ćišta štaj
Ru
Kuglasti gumbi
Pritezni vijci
Nivelirni vijci
Pozicionirni čepovi
Ru
čke za pritezanje
čična kola
www.metalika-kacin.com
Tehnika zatvaranja
51000 RIJEKA, Vukovarska 7b T/F 051 213 060M 091 58 70 744 [email protected]
||
-
R
Supporting and Levelling Elements Contents
ARTICULATED FEETin reinforced polyamide
Page R09-R33
FIXED FEETin reinforced polyamide and reinforced rubber
Page R34-R39
ARTICULATED FEET GRIPPERin reinforced polypropylene and stainless steel
Page R40-R45
ARTICULATED FEETin steel
Page R46-R51
-
R01
R
Supporting and Levelling Elements Contents
FIXED FEETin steel
Page R52-R54
VIBRATION ABSORBING FEETin steel
Page R55
ANTI-SLIP SUPPORTSin steel and rubber
Page R56-R57
THREADED BUSHINGSfor round and square tubes
Page R58-R59
-
R
Part./Art. /Réf. 675 Part./Art. /Réf. 753
R35
Part./Art. /Réf. 602
R37
Part./Art. /Réf. 745
R38
R34
Part./Art. /Réf. 626-622-628 Part./Art. /Réf. 627-623-629
R40 R41
R02
TM
antibacterial protection
®TM
antibacterial protection
®
New products
FIXEDFEET
ARTICULATEDFEET
GRIPPER in
reinforcedpolypropylene
and stainless steel
Available only with Available only with
-
R03
R
Part./Art. /Réf. 750-751-752
Part./Art. /Réf. 726
Part./Art. /Réf. 747-748-749
R46
Part./Art. /Réf. 224Part./Art. /Réf. 180
R58 R59
R47
New products
ACCESSORIES
ARTICULATEDFEET
insteel
THREADEDBUSHINGS
forround and
square tubes
Versions dia. 50 and 80 mm
Spacer for Part. 170-170R-171-171R-254-297-169
Versions 30x30 mm
-
R04
R
Part.269 Part. 552 Part.173
Part. 172
Part.98-98R
Part. 94 - 94R Part. 323 Part. 132 -132R Part. 133 -133R
Part.292 - 292R Part. 170 - 170RPart. 479 - 479R Part. 171 - 171R Part. 254
Part. 297 Part. 134 Part. 169 Part. 726
page R26-27-28-29-30-31-33
ø 170 • Spacer for Part. 170-170R-171-171R-254-297-169
NEW
Product range
ARTICULATEDFEET
inreinforcedpolyamide
page R09 page R10
ø 40 • Max. load 5000 N.
page R11
ø 50 • Max. load 10000 N.
page R12-R13
ø 60 • Max. load 12000 N. ø 40 • Max. load 10000 N.
page R14-R15 page R17
ø 80 • Prefitting for fixing • Max. load 10000 N.
page R18-R19
ø 100 • Max. load 13000 N.
page R20-R21
ø 100 • Prefitting for fixing • Max. load 13000 N.
page R16
ø 80 • Max. load 10000 N.ø 60 • Prefitting for fixing • Max. load 12000 N.
page R24-R25page R22-R23
ø 120 • Max. load 16000 N.
page R26-R27
ø 124 • Max. load 25000 N.
page R28-R29
ø 124 • Prefitting for fixing • Max. load 25000 N.
page R30
ø 124 • Max. load 45000 N.ø 110 • Prefitting for fixing • Max. load 20000 N.
page R31
ø 124 • Prefitting for fixing • Max. load 45000 N.
page R32
ø 100 • Prefitting for fixing • Max. load 20000 N.
page R33
ø 124 • Prefitting for fixing • Max. load 45000 N.
-
R05
R
TM
antibacterial protection
®TM
antibacterial protection
®TM
antibacterial protection
®
TM
antibacterial protection
®TM
antibacterial protection
®TM
antibacterial protection
®
Part. 675 Part. 753
ø 30 • Max. load 10000 N. ø 30 • Max. load 2500 N.
page R34 page R35
Part. 600
page R36
Part. 602
ø 50 • Max. load 10000 N.
page R37
page R40 page R42 page R44
Part. 626 Part. 622 Part. 628
Part. 627 Part. 623 Part. 629
page R41 page R43 page R45
NEW NEW NEW
NEW
Part. 31
page R39
Product range
Part. 745
Max. load 4000 N.
page R38
FIXEDFEET
in reinforcedpolyamide and
reinforced rubber
ARTICULATEDFEET
GRIPPER in
reinforcedpolypropylene
ARTICULATEDFEET
GRIPPER in
stainlesssteel
ø 50 • Reinforced polyamide• Max. load 2000 N.
ø 110 • Rubber • Max. load 6000 N.
ø 80 • Hygiene • Prefitting for fixing • Different colours • Customized cap with customer logo • Max. load 12000 N.
ø 100 • Hygiene • Prefitting for fixing • Different colours • Customized cap with customer logo • Max. load 19500 N.
ø 120 • Hygiene • Prefitting for fixing • Different colours • Customized cap with customer logo • Max. load 22000 N.
ø 80 • Hygiene • Prefitting for fixing • • Max. load 12000 N.
ø 100 • Hygiene • Prefitting for fixing • • Max. load 19500 N.
ø 120 • Hygiene • Prefitting for fixing • • Max. load 22000 N.
-
R06
R
Part. 403
Part.747 Part. 748 Part.749
Part. 752
Part.750
Part. 751
Product range
Part. 351 Part. 441 Part.349
Part. 549 Part. 546 Part. 547 Part. 548 Part. 408
Part. 383 Part. 384 Part. 399 Part. 385
Part. 528 Part. 406 Part. 529
ARTICULATEDFEET
insteel
FIXED FEET
insteel
ø 40 • Stainless steel • Hygiene • Max. load 7000 N.
ø 65 • Stainless steel • Hygiene • Max. load 12000 N.
ø 90 • Stainless steel • Hygiene • Max. load 11000 N.
ø 110 • Stainless steel • Hygiene • Max. load 10000 N.
ø 100 • Painted steel • Max. load 50000 N.
ø 100 • Painted steel • Max. load 50000 N.
ø 123 • Painted steel • Max. load 50000 N.
ø 123 • Painted steel • Max. load 50000 N.
ø 123 • Stainless steel andzinc plated steel • Max. load 10000 N.
ø 123 • N. 2 holes • Zinc plated steel • Max. load 10000 N.
ø 123 • N. 4 holes • Stainless steel and zinc plated steel • Max. load 10000 N.
ø 50 • Stainless steel •Hygiene • Max. load 8000 N.
ø 158 • Painted steel • Max. load 50000 N.
ø 80 • Stainless steel • Hygiene • Max. load 18000 N.
ø 100 • Stainless steel • Hygiene • Max. load 22000 N.
ø 100 • Stainless steel • Hygiene • Max. load 25000 N.
ø 80 • Stainless steel • Hygiene • Max. load 25000 N.
ø 80 • Stainless steel • Hygiene • Max. load 12000 N.
ø 100 • Stainless steel • Hygiene • Max. load 12000 N.
ø 120 • Stainless steel • Hygiene • Max. load 12000 N.
ø 125 • Stainless steel • Hygiene • Max. load 26000 N.
ø 120 • Stainless steel • Hygiene • Max. load 25000 N.
NEW NEW NEW NEW
NEW NEW
page R52
page R53 page R53 page R54 page R54
page R46 page R46 page R46 page R47
page R47 page R48 page R49 page R49page R47
page R50page R50 page R50 page R50 page R51
page R52 page R52 page R52
-
R07
R
Part. 407
Part. 180 Part. 224
Product range
Part. 701 Part. 702 Part. 703
Part. 230 Part. 404 Part. 55 Part. 187
VIBRATIONABSORBING
FEETin
steel
ANTI-SLIPSUPPORTS
insteel and
rubber
THREADEDBUSHINGS
forround and
square tubes
ø 80 • Zinc plated steel/zincplated steel painted.
ø 120 • Zinc plated steel/zinc plated steel painted.
ø 160 • Zinc plated steel/zinc plated steel painted.
ø 100 • Stainless steel/nickel plated steel • Max. load 10000 N.
ø 100 • Painted steel • Max. load 5000 N.
ø 110 • Rubber with steel insert • Max. load 6000 N.
ø 123 • Rubber with painted steel insert • Max. load 20000 N.
Spindle for Part. 230 - 404 - 55 - 187 • Zinc plated steel.
For round tubes Ø 26,9-30-33,7-38-42,4-48,3-54-60,3mm and 1,5"- 2."
For square tubes 30-35-40-50 mm and 1,5"- 2."
page R56-R57
page R58 page R59
page R55 page R55 page R55
page R56 page R56 page R57 page R57
-
R08
R
TM
antibacterial protection
®
• Austenitic structure.• High resistance to chemicals. • Excellent resistance to oxidation.• Non magnetic steel.• Operating temperature:
in air (- 70°C to + 430°C)in hot water (+ 120°C)
• Sectors of use Humid and corrosive environments. Environments where hygiene regulations are strict and indispensable (food and dairy industry, chemicals-pharmaceuticals, bottling).Electronics industry (where non-magnetic properties are required).
Stainless steel
Zinc plated steel• Operating temperature:
in air (- 40°C to + 180°C)in hot water (+ 120°C)
• Sectors of useMoisture-free environments with low corrosion.
Nickel plated brass• Good resistance to chemicals.• Operating temperature:
in air (- 40°C to + 180°C)in hot water (+ 120°C)
• Sectors of useHumid and wet environments.
• Good resistance to chemicals.• Operating temperature:
in air (- 5°C to + 120°C)in hot water (+ 100°C)
• Colour: black.• Sectors of use
Industrial, packaging.
Reinforced polyamide with steel pin
Reinforced polyamide PA FV• Good mechanical strength. Able to withstand high load capacities.• High thermal resistance.• Good resistance to chemicals. • Operating temperature:
in air (- 30°C to + 120°C)in hot water (+ 100°C)
• Colour: black.• Inflammability: 94HB.
• Recommended in applications requiring high resistance to chemicals and fair mechanical properties (the load capacity is lower than reinforced polyamide).• Operating temperature:
in air (+ 5°C to + 115°C)in hot water (+ 115°C)
• Colour: black.• Inflammability: 94HB.
Reinforced polypropylene PP FV
NBR rubber• Operating temperature:
in air (- 35°C to + 100°C)in hot water (+ 80°C)
• Colour: black.• Inflammability: 94HB
Bacteria E.coli in Microban® plastic compound compared toidentical untreaded plastic.
Without protection, growth of bacteria on and around the product.
With Microban®,absence of bacteria on and around the product.
SPINDLE MATERIALS
FOOTPLATE MATERIALS
ANTI-SLIP MATERIALS
ANTIBACTERIAL PROTECTION
• Articulated Feet Gripper footplates Part.622-623-626-627- 628-629, are supplied with Microban® antibacterial protection.• By penetrating the cell wall of bacteria Microban® inhibits the growth of most common food poisoning bacteria, such as E.coli, Salmonella, Listeria, S-aureus, Campylobacter, which can cause contamination and odour.• Indipendent laboratory tests have proven Microban® to be effective throughout the lifetime of the product. Because it is built-in, it is working all-over.• The active agent used in Microban® technology has been recommended for approval in food contact uses by the European Union Scientific Commitee for Food (SCF); in the United States the Environmental Protection Agency (EPA) has approved it for use in conveyor belts.
Materials characteristics
-
4040
R09
R
h
s
ø D
ø40
HA
ød15 15
1
A(m
m) H
(mm
)
ø d
Ø12,8 mm
FmaxN
in reinforced polyamideArticulated Feet
Part.269
Spindle in stainless steel
Codefeet supplied
without anti-slip
M 12
M 14
M 16
M 10
10000
105100165100105165
7169
1326872
132
2a2a2a2a2a2a
269/625002269/625012269/625022269/625032269/625042269/625052
Spindle in zinc plated steel
M 10
M 12
M 14
M 16
M 8
10000
7065
10515080
10013010080
100200
403371
118486996684767
167
2a2a2a2a2a2a2a2a2a2a2a
121212131515
1212121212121213151515
Spindle type
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging 48 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
Accessories
Anti-slip
- Code : 630002. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 48 pieces.
mm
Packaging : 24 pieces ( for M8, M10 ). 8 pieces ( forM12, M14, M16 ).
Nut + Washer
M8M10M12M14M16
-630182630192630202630212
630102630112630122630132630142
6,5 8101113
1721242830
1317192224
1,622,52,53
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
269/625062269/625072269/625082269/625092269/625102269/625112269/625122269/625132269/625142•
269/625152269/625162
-
4040
R10
R
h
s
ø D
ø40
HA
ød15 15
A(m
m) H
(mm
)
ø d
Ø12,8 mm
FmaxN
1Part.552
Accessories
Nut + Washer
Anti-slip
- Code : 630002. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 48 pieces.
Spindle in stainless steel
Codefeet supplied
without anti-slip
M 12
M 14
M 16
M 10
5000
9590
1559095
155
7169
1326872
132
2a2a2a2a2a2a
552/625502552/625512552/625522552/625532552/625542552/625552
Spindle in zinc plated steel
M 10
M 12
M 14
M 16
M 8
5000
605595
1407090
120907090
190
403371
118486996684767
167
2a2a2a2a2a2a2a2a2a2a2a
121212131515
1212121212121213151515
Spindle type
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 48 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
mm
Packaging : 24 pieces ( for M8, M10 ). 8 pieces ( forM12, M14, M16 ).
M8M10M12M14M16
-630182630192630202630212
630102630112630122630132630142
6,5 8101113
1721242830
1317192224
1,622,52,53
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
in reinforced polyamideArticulated Feet
552/625562552/625572552/625582552/625592552/625602552/625612552/625622552/625632552/625642•
552/625652552/625662
-
5050
R11
R
h
s
ø D
A(m
m) H
(mm
)
ø d
Ø12,8 mm
FmaxN
ø50
HA
ød15 15
1
Part.173
Accessories
Nut + Washer
Anti-slip
- Code : 630012. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
Spindle in stainless steel
Codefeet supplied
without anti-slip
M 12
M 14
M 16
M 10
10000
9590
1559095
155
7169
1326872
132
2a2a2a2a2a2a
173/625252173/625262173/625272173/625282173/625292173/625302
Spindle in zinc plated steel
M 10
M 12
M 14
M 16
M 8
10000
605595
1407090
120907090
190
403371
118486996684767
167
2a2a2a2a2a2a2a2a2a2a2a
121212131515
1212121212121213151515
Spindle type
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
mm
M8M10M12M14M16
-630182630192630202630212
630102630112630122630132630142
6,5 8101113
1721242830
1317192224
1,622,52,53
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Packaging : 24 pieces ( for M8, M10 ). 8 pieces ( forM12, M14, M16 ).
in reinforced polyamideArticulated Feet
173/625312173/625322173/625332173/625342173/625352173/625362173/625372173/625382173/625392•
173/625402173/625412
-
R12
6060
FmaxN
mm
ø d
R
h
s
ø D
ø60
HA
ød15 15
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
3
Part.98
Accessories
mm
Packaging : 8 pieces.
Nut + Washer
Anti-slip
- Code : 630022. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 16
M 20
M 24
M 14
10000
110100115160185120185185
1113131313161619
766481
12415184
149146
--------
--------
1a1a1a1a1a1a1a1a
98/62600298/62601298/62602298/62603298/62604298/62605298/62606298/626072
Spindle in nickel plated brassM 16 1000095 1663 -2b- 98/626082
Spindle in zinc plated steel
M 16
M 14
10000
908095
100125130150160165185200235135185250120185
1116131616131316161316161616161919
564861688996
11612413015116520110015021481
146
-----------------
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
98/62609298/68570198/62610298/67417198/68574198/62611298/62612298/67419198/68576198/62613298/67421198/67423198/62614298/62615298/62616298/62617298/626182
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
6000
100120180
243030
5469
129
333
---
---
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
in reinforced polyamideArticulated Feet
98/6192098/51540•98/51530
-
R13
6060
FmaxN
mm
ø d
R
h
s
ø D
A(m
m) H
(mm
)
Ø24,5Ø24,5 Ø24,5
ø60H
A
ød15 15
3
Reinforced version
Same dimensions as Part. 98, it differs in its higher load capacity.
Part.98R
Anti-slip
- Code : 630022. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces
mm
Packaging : 8 pieces.
Nut + Washer
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
hmm
øDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20
M 24
M 16
12000
115150185200120185250120220255
7410914415974
13920479
179216
----------
6b6b6b6b---
6b6b-
98/62878298/62879298/62880298/62881298/5317198/5316198/68564198/62886298/62887298/61634
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12
12000
100150195150195100110120150185225195
191919191924242424242424
24242424161616242419
53103149103149536775
103139181149
666666666666
------------
------------
----
1b1b1b--
1b
Spindle in zinc plated steel2424242416161616242419
-----------
Spindle in zinc plated steel with ball in reinforced polyamide (black)
M 20
M 24
M 12
M 16
12000
12000
95130160195120150185250120185325
5489
11915474
10613920479
144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
196110 64 -- 98/673511
Accessories
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces (*= 12 pieces).- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
CodeStainless steel
AISI 304Zinc plated
steel
in reinforced polyamideArticulated Feet
98/67367198/67369198/67371198/673751•
98/673771•
98/67379198/63816298/673831•
98/67385198/67387198/67393198/669001•
98/62882298/62883298/62884298/62885298/5315198/6156498/5256198/6640198/628882•
98/62889298/673651*
-
6060
R14
mm
FmaxN
ø d
R
h
s
ø D
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
3
955030 15
ø12
HA
14
ød15 15
Part.94
Accessories
mm
Packaging : 8 pieces.
Nut + Washer
Anti-slip
- Code : 630032. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 16
M 20
M 24
M 14
10000
110100115160185120185185
1113131313161619
766481
12415184
149146
--------
--------
1a1a1a1a1a1a1a1a
Spindle in nickel plated brassM 16 1000095 1663 -2b-
Spindle in zinc plated steel
M 16
M 14
10000
908095
100125130150160165185200235135185250120185
1116131616131316161316161616161919
564861688996
11612413015116520110015021481
146
-----------------
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
6000
100120180
243030
5469
129
333
---
---
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
94/62619294/62620294/62621294/62622294/62623294/62624294/62625294/626262
94/626272
94/62628294/69054194/62629294/69058194/69060194/62630294/62631294/69064194/69066194/62632294/69072194/69074194/62633294/62634294/62635294/62636294/626372
Fixing holes,obtainable by breaking"diaphragm".
in reinforced polyamideArticulated Feet
94/69042194/690441•
94/690461
-
6060
R15
mm
FmaxN
ø d
R
h
s
ø D
A(m
m) H
(mm
)
Ø24,5Ø24,5 Ø24,5
3
955030 15
ø12
HA
14
ød15 15
Reinforced version
Same dimensions as Part. 94, it differs in its higher load capacity.
Part.94R
mm
Packaging : 8 pieces.
Nut + Washer
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20
M 24
M 16
12000
115150185200120185250120220255
74109144159
74139204
79179216
----------
6b6b6b6b---
6b6b-
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces (*= 12 pieces).- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12
12000
100150195150195100110120150185225195
191919191924242424242424
24242424161616242419
53103149103149
536775
103139181149
666666666666
------------
------------
----
1b1b1b--
1b
Spindle in zinc plated steel2424242416161616242419
-----------
Spindle in zinc plated steel with ball in reinforced polyamide (black)
M 20
M 24
M 12
M 16
12000
12000
95130160195120150185250120185325
5489
119154
74106139204
79144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
196110 64 -- 94/690481
Accessories
Anti-slip
- Code : 630032. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
94/62687294/62688294/62689294/62690294/69000194/69008194/69014194/62695294/62696294/690301
Fixing holes,obtainable by breaking"diaphragm".
in reinforced polyamideArticulated Feet
94/68956194/68958194/68960194/689681•
94/689701•
94/68974194/68978194/689801•
94/68982194/68990194/68998194/690121•
94/62691294/62692294/62693294/62694294/69078194/69085194/69087194/69093194/626972•
94/62698294/691071*
-
R16
8080
ø d
mm
FmaxN
R
A(m
m) H
(mm
)
Ø14,2 Ø12,8
2
ø80
H
ød
A
15 15
h
s
ø D
Ø14,2
Part.172
Anti-slip
- Code : 630042. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 12
M 20
M 14
M 16
M 24
M 10
10000
10000
10000
9000
9000
9000
9000
9000
9000
9000
--------------
2a2a2a2a-
2a--
2a----
----
1a1a-
1a1a-
1a1a1a1a
Spindle in nickel plated brassM 16 1000090 1663 2b--
Spindle in zinc plated steel
M 10
M 12
M 14
M 8
10000
10000
10000
10000
----------
2b--
2b2b--
2b2b-
2b-
2b-----
2a2a2a2a2a2a2a-
2a2a--
2a--------
2a------
-------
1a---
1a---
1a1a--
1a---
1a1a1a1a1a
M 24
M 20
M 16
172/626462
Nut + Washer
mm
Packaging : 24 pieces ( for M8, M10 ). 8 pieces ( forM12, M14, M16, M20, M24 ).
M8M10M12M14M16M20M24
-630182630192630202630212630222630232
630102630112630122630132630142630152630162
6,5 81011131619
17212428303744
13171922243036
1,622,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
656095
1457095
12085957575909595
115125145150155180190195230130180245115180
403371
118486996566847486167688996
11612413015116516720110015021481
146
12121212121212111315161315161613131616131615161616161919
9595
15595
10595
100110155160180115180180
7169
1326876647281
12413215184
149146
1212121211131513131513161619
172/65666172/65566172/674461172/626802172/626382172/626392172/626812172/626402172/626412172/626822172/626422172/626432172/626442172/626452
Accessories
in reinforced polyamideArticulated Feet
172/674401172/60804172/60824172/62711172/60834172/54711172/58391172/626472172/626762172/626772•
172/685881172/626482172/626782172/638492172/685901172/626492172/626502172/638502172/685921172/626512172/637862172/626792172/63492172/626522172/626532172/626542172/626552172/626562
-
R17
8080
ø d
mm
FmaxN
R
h
s
ø D
ø54
16
ø9 N. 2 - 180
ø80
HA
ød15 15
2
A(m
m) H
(mm
)
Ø14,2 Ø12,8 Ø14,2
Fixing holes,obtainable by breaking"diaphragm".
Anti-slip
- Code : 630042. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
Nut + Washer
mm
Packaging : 24 pieces ( for M8, M10 ). 8 pieces ( forM12, M14, M16, M20, M24 ).
M8M10M12M14M16M20M24
-630182630192630202630212630222630232
630102630112630122630132630142630152630162
6,5 81011131619
17212428303744
13171922243036
1,622,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 12
M 20
M 14
M 16
M 24
M 10
10000
10000
10000
9000
9000
9000
9000
9000
9000
9000
--------------
2a2a2a2a-
2a--
2a----
----
1a1a-
1a1a-
1a1a1a1a
Spindle in nickel plated brassM 16 1000090 1663 2b-
-
Spindle in zinc plated steel
M 10
M 12
M 14
M 8
10000
10000
10000
10000
----------
2b--
2b2b--
2b2b-
2b-
2b-----
2a2a2a2a2a2a2a-
2a2a--
2a--------
2a------
-------
1a---
1a---
1a1a--
1a---
1a1a1a1a1a
M 24
M 20
M 16
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
656095
1457095
12085957575909595
115125145150155180190195230130180245115180
403371
118486996566847486167688996
11612413015116516720110015021481
146
12121212121212111315161315161613131616131615161616161919
9595
15595
10595
100110155160180115180180
7169
1326876647281
12413215184
149146
1212121211131513131513161619
323/65686N323/65596N323/679061N323/626842323/626572323/626582323/626852323/626592323/626602323/626862323/626612323/626622323/626632323/626642
323/626652
Same dimensions as Part. 172, it differs in its predisposition to fixing.
Accessories
in reinforced polyamideArticulated Feet
323/678901N323/61384N323/60464N323/61404N323/61414N323/62313N323/678941N323/626662323/626832323/638022•
323/685981N323/626672323/638032323/62353N323/686001N323/626682323/626692323/69935N323/686021N323/626702323/62383N323/638042323/679021N323/626712323/626722323/626732323/626742323/626752
Part.323
-
R18
100100
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
H
ø102
ød
A
15 15
3
Part.132
Accessories
Packaging : 8 pieces.
Nut + Washer
Anti-slip
- Code : 630052. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 16
M 20
M 24
M 14
12000
1113131313161619
766481
124151
84149146
--------
--------
1a1a1a1a1a1a1a1a
Spindle in nickel plated brassM 16 120001663 -2b-
Spindle in zinc plated steel
M 16
M 14
12000
1116131616131316161316161616161919
564861688996
116124130151165201100150214
81146
-----------------
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
6000
243030
5469
129
333
---
---
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
132/633002132/633012132/633022132/633032132/633042132/633052132/633062132/633072
132/633082
132/633092132/686141132/633102132/675081132/686181132/633112132/633122132/675101132/686201132/633132132/675121132/675141132/633142132/633152132/633162132/633172132/633182
110100115160185120185185
95
908095
100125130150160165185200235130180250120185
100120185
in reinforced polyamideArticulated Feet
132/627082132/627092•
132/627102
-
R19
100100
ø d
mm
FmaxN
R
Serie rinforzata
h
s
ø D
A(m
m) H
(mm
)
Ø24,5Ø24,5 Ø24,5
Hø102
ød
A
15 15
3
Part.132R
Anti-slip
mm
Packaging : 8 pieces.
Nut + Washer
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20
M 24
M 16
13000
115150185200120185250120220255
7410914415974
13920479
179216
----------
6b6b6b6b---
6b6b-
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces (*= 12 pieces).- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12
13000
100150195150195100115120150185225195
191919191924242424242424
24242424161616242419
53103149103149536775
103139181149
666666666666
------------
------------
----
1b1b1b--
1b
Spindle in zinc plated steel2424242416161616242419
-----------
Spindle in zinc plated steel with ball in reinforced polyamide (black)
M 20
M 24
M 12
M 16
13000
13000
5489
11915474
10613920479
144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
196110 64 -- 132/674521
95130160195120155185250120185325
132/627002132/627012132/627022132/627032132/627042132/627052132/686081132/627062132/627072132/61834 Same dimensions as Part. 132, it differs in its higher
load capacity.
Reinforced version
Accessories
- Code : 630052. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
in reinforced polyamideArticulated Feet
132/674621132/674641132/674661132/674701•
132/674721•
132/674741132/638152132/674761•
132/674781132/672891132/69857132/674931•
132/627112132/627122132/627132132/627142132/627152132/627162132/627172132/627182132/627192•
132/627202132/65243*
-
R20
100100
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
ø74
19
ø11 N. 2 - 180
HA
ød
ø102
15 15
3
Part.133
Accessories
mm
Packaging : 8 pieces.
Nut + Washer
Anti-slip
- Code : 630052. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mms
mm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 16
M 20
M 24
M 14
12000
1113131313161619
766481
124151
84149146
--------
--------
1a1a1a1a1a1a1a1a
Spindle in nickel plated brassM 16 120001663 -2b-
Spindle in zinc plated steel
M 16
M 14
12000
1116131616131316161316161616161919
564861688996
116124130151165201100150214
81146
-----------------
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
6000
243030
5469
129
333
---
---
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
110100115160185120185185
95
908095
100125130150160165185200235130180250120185
100120185
133/633192133/633202133/633212133/633222133/633232133/633242133/633252133/633262
133/633272
133/633282133/686381N133/633292133/679711N133/686421N133/633302133/633312133/679731N133/686441N133/633322133/679751N133/679771N133/633332133/633342133/633352133/633362133/633372
Fixing holes,obtainable by breaking"diaphragm".
in reinforced polyamideArticulated Feet
133/627292133/627302•
133/627312
-
R21
100100
ø d
mm
FmaxN
R
Serie rinforzata
h
s
ø D
A(m
m) H
(mm
)
Ø24,5Ø24,5 Ø24,5
HA
ød
ø102
15 15
ø74
19
ø11 N. 2 - 180
3
Same dimensions as Part. 133, it differs in its higher load capacity.
Part.133R
Anti-slip
mm
Packaging : 8 pieces.
Nut + Washer
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20
M 24
M 16
13000
115150185200120185250120220255
74109144159
74139204
79179216
----------
6b6b6b6b---
6b6b-
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12
13000
100150195150195100115120150185225195
191919191924242424242424
24242424161616242419
53103149103149
536775
103139181149
666666666666
------------
------------
----
1b1b1b--
1b
Spindle in zinc plated steel2424242416161616242419
-----------
Spindle in zinc plated steel with ball in reinforced polyamide (black)
M 20
M 24
M 12
M 16
13000
13000
5489
119154
74106139204
79144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
196110 64 -- 133/679121N
95130160195120155185250120185325
- Code : 630052. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
133/627212133/627222133/627232133/627242133/627252133/627262133/686321N133/627272133/627282133/61994N
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces (*= 12 pieces).- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
Fixing holes,obtainable by breaking"diaphragm".
Reinforced version
Accessories
in reinforced polyamideArticulated Feet
133/679231N133/679251N133/679271N133/679311N•
133/679331N•
133/679351N133/638142133/679371N•
133/679391N133/69706N133/679461N133/679551N•
133/627322133/627332133/627342133/627352133/627362133/627372133/627382133/627392133/627402•
133/627412133/679211N*
-
R22
110110
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
ø11 N. 2 - 180
ø83
16
ø110
HA
ød15 15
3
Part.479
Accessories
mm
Packaging : 8 pieces.
Nut + Washer
Anti-slip
- Code : 630062. - Material : PVC rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 16 pieces.
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 16
M 20
M 24
M 14
15000
1113131313161619
766481
124151
84149146
--------
--------
1a1a1a1a1a1a1a1a
Spindle in nickel plated brassM 16 150001663 -2b-
Spindle in zinc plated steel
M 16
M 14
15000
1116131616131316161316161616161919
564861688996
116124130151165201100150214
81146
-----------------
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
6000
243030
5469
129
333
---
---
120110125170195130195195
105
10090
105110135140160170175195210245140190260130195
110130190
479/633382479/633392479/633402479/633412479/633422479/633432479/633442479/633452
479/633462
479/633472479/686621N479/633482479/675811N479/686661N479/633492479/633502479/675831N479/686681N479/633512479/675851N479/675871N479/633522479/633532479/633542479/633552479/633562
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 16 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
Fixing holes,obtainable by breaking"diaphragm".
in reinforced polyamideArticulated Feet
479/627502479/627512•
479/627522
-
R23
110110
ø d
mm
FmaxN
R
Serie rinforzata
h
s
ø D
A(m
m) H
(mm
)
Ø24,5Ø24,5 Ø24,5
ø11 N. 2 - 180
ø83
16
ø110
HA
ød15 15
3
Same dimensions as Part. 479, it differs in its higher load capacity.
Part.479R
mm
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20
M 24
M 16
20000
74109144159
74139204
79179216
----------
6b6b6b6b---
6b6b-
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12
20000
191919191924242424242424
24242424161616242419
53103149103149
536775
103139181149
666666666666
------------
------------
----
1b1b1b--
1b
Spindle in zinc plated steel2424242416161616242419
-----------
Spindle in zinc plated steel with ball in reinforced polyamide (black)
M 20
M 24
M 12
M 16
20000
20000
5489
119154
74106139204
79144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
196120 64 -- 479/675341N
105140170205130165195260130195340
479/627422479/627432479/627442479/627452479/627462479/627472479/686561N479/627482479/627492479/636861N
110160205160205110125130160195240205
125160195210130195260130230270
Fixing holes,obtainable by breaking"diaphragm".
Reinforced version
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 16 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
Accessories
Nut + Washer
Anti-slip
- Code : 630062. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 16 pieces.
in reinforced polyamideArticulated Feet
479/627532479/627542479/627552479/627562479/627572479/627582479/627592479/627602479/627612•
479/627622479/675501N
479/636181N479/636201N479/636221N479/636261N•
479/636271N•
479/636331N479/636371N479/636391N•
479/636431N479/636471N479/675591N479/636741N•
-
R24
120120
ø d
mm
FmaxN
R
h
s
ø D
HA
ø120
ød15 15
3
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
Part.292
Accessories
mm
Packaging : 8 pieces.
Nut + Washer
Anti-slip
- Code : 630072. - Material : PVC rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 16
M 20
M 24
M 14
15000
1113131313161619
766481
124151
84149146
--------
--------
1a1a1a1a1a1a1a1a
Spindle in nickel plated brassM 16 150001663 -2b-
Spindle in zinc plated steel
M 16
M 14
15000
1116131616131316161316161616161919
564861688996
116124130151165201100150214
81146
-----------------
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
6000
243030
5469
129
333
---
---
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
110100115160185120185185
95
908095
100125130150160165185200235130180250120185
100120185
292/633572292/633582292/633592292/633602292/633612292/633622292/633632292/633642
292/633652
292/633662292/686861292/633672292/676701292/686901292/633682292/633692292/676721292/686921292/633702292/676741292/676761292/633712292/633722292/633732292/633742292/633752
in reinforced polyamideArticulated Feet
292/627712292/627722•
292/627732
-
R25
120120
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
Ø24,5Ø24,5 Ø24,5
HA
ø120
ød15 15
3
Reinforced version
Same dimensions as Part. 292, it differs in its higher load capacity.
Part.292R
Anti-slip
mm
Packaging : 8 pieces.
Nut + Washer
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20
M 24
M 16
16000
7410914415974
13920479
179216
----------
6b6b6b6b---
6b6b-
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces (*= 12 pieces).- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12
16000
191919191924242424242424
24242424161616242419
53103149103149536775
103139181149
666666666666
------------
------------
----
1b1b1b--
1b
Spindle in zinc plated steel2424242416161616242419
-----------
Spindle in zinc plated steel with ball in reinforced polyamide (black)
M 20
M 24
M 12
M 16
16000
16000
5489
11915474
10613920479
144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
196110 64 -- 292/65013
95130160195120155185250120185330
292/627632292/627642292/627652292/627662292/627672292/627682292/686801292/627692292/627702292/62794
100150195150195100115120150185230195
115150185200120185250120220260
- Code : 630072. - Material : PVC rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
Accessories
in reinforced polyamideArticulated Feet
292/676211292/676231292/676251292/676291•
292/676311•
292/676331292/62654292/676351•
292/676371292/676391292/676451292/676541•
292/627742292/627752292/627762292/627772292/627782292/627792292/627802292/627812292/627822•
292/627832292/676191*
-
R26
124124
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
ø124
HA
ød8 8
8
Ø 170
110
110
102,
5
Ø 170
110
110
102,
5
Steel reinforcement disc
Part.170
Accessories
mm
Packaging : 8 pieces
Nut + Washer
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Code
Footplate inpolyamide
PA FV
Spindle types
M 16
M 20
M 24
M 14
10000(PA FV)5000
(PP FV)
10000(PA FV)5000
(PP FV)
6000
135120140180210145210210
1113131313161619
1116131616131316161316161616161919
766481
12415184
149146
1a1a1a1a1a1a1a1a
170/633762170/633782170/633802170/633822170/633842170/633862170/633882170/633902
Code
Footplate inpolypropylene
PP FV
170/633772170/633792170/633812170/633832170/633852170/633872170/633892170/633912
Spindle in nickel plated brassM 16
Spindle in zinc plated steel
M 16
M 14 115100120120145155175180185210220255155205275145210
564861688996
11612413015116520110015021481
146
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
120140205
243030
5469
129
333
---
---
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black) and reinforced polypropylene PP FV (black).- Packaging : 8 pieces.- Anti-slip supplied separately (on request supplied fixed to the foot).- On request different length.- Fmax. = maximum applicable load in static conditions.
--------
--------
-----------------
feet supplied without anti-slip
120 63 - 2b - 16 170/633922 170/633932
170/633942170/L6871810170/633962170/L6918900170/L6872610170/633982170/634002170/L6782510170/L6873010170/634022170/L6922900170/L6782910170/634042170/634062170/634082170/634102170/634122
170/633952170/L6872010170/633972170/L6917900170/L6872810170/633992170/634012170/L6782710170/L6873210170/634032170/L6921900170/L6783110170/634052170/634072170/634092170/634112170/634132Anti-slip
- Code with reinforcement disc : 630082.- Code without reinforcement disc : 630092.- Assembly : with screws for plate supplied loose.- Material : NBR rubber (black), 80 Shore.- Packaging : 8 pieces.
Articulated Feetin reinforced polyamide and polypropylene
- Code : 726/688772.- Material : reinforced polyamide PA FV (black).- Weight : 1,15 Kg:- Packaging : 8 pieces.
Part. 726 - Spacer
170/627922170/627932•
170/627942
170/628262170/628272•
170/628282
Product available
until April 2007
Will be replaced
with Part 171
New Product
-
R27
124124
ø d
mm
FmaxN
R
ø124H
A
ød8 8
A(m
m) H
(mm
)
h
s
ø D
8
Ø24,5 Ø24,5 Ø24,5
Ø 170
110
110
102,
5
Reinforced version
Same dimensions as Part. 170, it differs in its higher load capacity.
Steel reinforcement disc
Part.170R
Nut + Washer
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black) and reinforced polypropylene PP FV (black).- Packaging : 8 pieces.- Anti-slip supplied separately (on request supplied fixed to the foot).- On request different length.- Fmax. = maximum applicable load in static conditions.
Spindle in stainless steel
Code
Footplate inpolyamide
PA FV
Spindle types
M 20
M 24
M 16
25000(PA FV)10000(PP FV)
17000(PA FV)10000(PP FV)
135170205220140205270140240280
24242424161616242419
191919191924242424242424
2424242416161616242419
7410914415974
13920479
179216
----
1b1b1b--
1b
170/627842170/627852170/627862170/627872170/627882170/627892170/687061170/627902170/627912170/52101
Code
Footplate inpolypropylene
PP FV
170/628292170/628302170/628312170/628322170/628332170/628342170/687081170/628352170/628362170/62474
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12120170215170215120135145170205250215
53103149103149536775
103139181149
------------
666666666666
-----------
------------
6b6b6b6b---
6b6b-
----------
feet supplied without anti-slip
25000(PA FV)10000(PP FV)
Spindle in zinc plated steel
M 24
M 16
M 20
115150180215140175205270140205350
5489
11915474
10613920479
144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
Spindle in zinc plated steel with ball in reinforced polyamide (black)M 12 130 64 -- 170/L6770010 170/L6770210
mm
Packaging : 8 pieces
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
6 19
Anti-slip
Accessories
- Code with reinforcement disc : 630082.- Code without reinforcement disc : 630092.- Assembly : with screws for plate supplied loose.- Material : NBR rubber (black), 80 Shore.- Packaging : 8 pieces
Articulated Feetin reinforced polyamide and polypropylene
- Code : 726/688772.- Material : reinforced polyamide PA FV (black).- Weight : 1,15 Kg:- Packaging : 8 pieces.
Part. 726 - Spacer
170/L6772710170/L6773110170/L6773510170/L6774310•
170/L6774710•
170/L6775110170/L6210400170/L6775510•
170/L6775910170/L6776310170/L6777510170/L6779410•
170/L6772910170/L6773310170/L6773710170/L6774510•
170/L6774910•
170/L6775310170/L6231400170/L6775710•
170/L6776110170/L6776510170/L6777710170/L6779610•
170/627952170/627962170/627972170/627982170/627992170/628002170/628012170/628022170/628032•
170/628042170/68821
170/628372170/628382170/628392170/628402170/628412170/628422170/628432170/628442170/628452•
170/628462170/677251
Product available
until April 2007
Will be replaced
with Part 171R
New Product
-
R28
124124
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
Ø14,2 Ø14,2 Ø24,5
ø98,5
17
ø10,2 N. 2 - 180
HA
ød
ø124
8 8
8
Ø 170
110
110
102,
5
Ø 170
110
110
102,
5
Steel reinforcement disc
Part.171
Accessories
mm
Packaging : 8 pieces.
Nut + Washer
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Code
M 16
M 20
M 24
M 14
10000(PA FV)5000
(PP FV)
10000(PA FV)5000
(PP FV)
6000
135120140180210145210210
1113131313161619
1116131616131316161316161616161919
766481
12415184
149146
1a1a1a1a1a1a1a1a
Code
Spindle in nickel plated brassM 16
Spindle in zinc plated steel
M 16
M 14 115100120120145155175180185210220255155205275145210
564861688996
11612413015116520110015021481
146
-2b-
2b2b--
2b2b-
2b2b-----
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Spindle in reinforced polyamid (black) with steel pin
M 20
M 16
M 24
M 20
120140205
243030
5469
129
333
---
---
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black) and reinforced polypropylene PP FV (black).- Packaging : 8 pieces.- Anti-slip supplied separately (on request supplied fixed to the foot).- On request different length.- Fmax. = maximum applicable load in static conditions.
--------
--------
-----------------
120 63 - 2b - 16
Anti-slip
171/634142171/634162171/634182171/634202171/634222171/634242171/634262171/634282
171/634152171/634172171/634192171/634212171/634232171/634252171/634272171/634292
171/634302 171/634312
171/634322171/L687651N171/634342171/L69509N171/L687731N171/634362171/634382171/L682441N171/L687771N171/634402171/L69549N171/L682481N171/634422171/634442171/634462171/634482171/634502
171/634332171/L687671N171/634352171/L69499N171/L687751N171/634372171/634392171/L682461N171/L687791N171/634412171/L69539N171/L682501N171/634432171/634452171/634472171/634492171/634512
Spindle typesFootplate inpolyamide
PA FV
Footplate inpolypropylene
PP FV
feet supplied without anti-slip
- Code with reinforcement disc : 630082.- Code without reinforcement disc : 630092.- Assembly : with screws for plate supplied loose.- Material : NBR rubber (black), 80 Shore.- Packaging : 8 pieces.
Fixing holes,obtainable by breaking"diaphragm".
Articulated Feetin reinforced polyamide and polypropylene
- Code : 726/688772.- Material : reinforced polyamide PA FV (black).- Weight : 1,15 Kg:- Packaging : 8 pieces.
Part. 726 - Spacer
171/628132171/628142•
171/628152
171/628472171/628482•
171/628492
New Product
-
R29
124124
ø d
mm
FmaxN
R
A(m
m) H
(mm
)
h
s
ø D
Ø24,5 Ø24,5 Ø24,5
HA
ød
ø124
8 8
ø98,5
17
ø10,2 N. 2 - 180
8
Ø 170
110
110
102,
5
Reinforced version
Same dimensions as Part. 171, it differs in its higher load capacity.
Steel reinforcement disc
Part.171R
Nut + Washer
• = Available upon request and minimum order quantity.- Footplate material : reinforced polyamide PA FV (black) and reinforced polypropylene PP FV (black).- Packaging : 8 pieces.- Anti-slip supplied separately (on request supplied fixed to the foot).- On request different length.- Fmax. = maximum applicable load in static conditions.
Spindle in stainless steel
Code
M 20
M 24
M 16
25000(PA FV)10000(PP FV)
17000(PA FV)10000(PP FV)
135170205220140205270140240280
24242424161616242419
191919191924242424242424
2424242416161616242419
7410914415974
13920479
179216
----
1b1b1b--
1b
Code
Spindle in stainless steel with ball in reinforced polyamide (black)
M 14
M 16
M 20
M 12120170215170215120135145170205250215
53103149103149536775
103139181149
------------
666666666666
-----------
------------
6b6b6b6b---
6b6b-
----------
25000(PA FV)10000(PP FV)
Spindle in zinc plated steel
M 24
M 16
M 20
115150180215140175205270140205350
5489
11915474
10613920479
144288
6b6b6b6b----
6b6b-
----
1b1b1b1b--
1b
Spindle in zinc plated steel with ball in reinforced polyamide (black)M 12 130 64 -- 171/L680671N 171/L680691N
mm
Packaging : 8 pieces.
M12M14M16M20M24
630192630202630212630222630232
630122630132630142630152630162
1011131619
2428303744
1922243036
2,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
6 19
Anti-slip
171/628052171/628062171/628072171/628082171/628092171/628102171/687531N171/628112171/628122171/682281N
171/628502171/628512171/628522171/628532171/628542171/628552171/687551N171/628562171/628572171/682301N
Footplate inpolyamide
PA FV
Spindle typesFootplate in
polypropylenePP FV
feet supplied without anti-slip
Accessories
Fixing holes,obtainable by breaking"diaphragm".
- Code with reinforcement disc : 630082.- Code without reinforcement disc : 630092.- Assembly : with screws for plate supplied loose.- Material : NBR rubber (black), 80 Shore.- Packaging : 8 pieces.
Articulated Feetin reinforced polyamide and polypropylene
- Code : 726/688772.- Material : reinforced polyamide PA FV (black).- Weight : 1,15 Kg:- Packaging : 8 pieces.
Part. 726 - Spacer
171/628162171/628172171/628182171/628192171/628202171/628212171/628222171/628232171/628242•
171/628252171/681231N
171/628582171/628592171/628602171/628612171/628622171/628632171/628642171/628652171/628662•
171/628672171/681251N
171/L681271N171/L681311N171/L681351N171/L681431N•
171/L681471N•
171/L681551N171/L681591N171/L600111N•
171/L681631N171/L600131N171/L681831N171/L681991N•
171/L681291N171/L681331N171/L681371N171/L681451N•
171/L681491N•
171/L681571N171/L681611N171/L600071N•
171/L681651N171/L600091N171/L681851N171/L682021N•
New Product
-
R30
124124
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
ø124
HA
ød8 8
8
Ø 170
110
110
102,
5
Ø 170
110
110
102,
5
- Code with reinforcement disc : 630082.- Code without reinforcement disc : 630092.- Assembly : with screws for plate supplied loose.- Material : NBR rubber (black), 80 Shore.- Packaging : 8 pieces.
Steel reinforcement disc
Part.254
Accessories
Anti-slip
Nut + Washer
mm
Packaging : 8 pieces.
M16M20M24M30
630212630222630232630242
630142630152630162630172
13161924
30374456
24303646
3344
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20M 24
M 30
M 16
45000
222222192727
121212---
254/629092254/629102254/629112254/678631254/629122254/629132
Spindle in zinc plated steel
M 30
M 20
45000
2222272727
100140120180250
1212---
---
111111
--
111111
155195190250325
254/629142254/629152254/629162254/629172254/688011
- Footplate material : reinforced polyamide PA FV (black).- Packaging : 8 pieces.- Anti-slip supplied separately (on request supplied fixed to the foot).- On request different length.- Fmax. = maximum applicable load in static conditions.
175205205230190250
118148148165120180
in reinforced polyamideArticulated Feet
- Code : 726/688772.- Material : reinforced polyamide PA FV (black).- Weight : 1,15 Kg:- Packaging : 8 pieces.
Part. 726 - Spacer
Product availab
le
until April 2007
Will be replaced
with Part 297
New Product
-
R31
124124
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
8
ø124
HA
ød8 8
ø98,5
20
ø12,5 N. 2 - 180
Ø 170
110
110
102,
5
Steel reinforcement disc
Part.297
Nut + Washer
mm
Packaging : 8 pieces.
M16M20M24M30
630212630222630232630242
630142630152630162630172
13161924
30374456
24303646
3344
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Anti-slip
Same dimensions as Part. 254, it differs in its predisposition to fixing.
Spindle in stainless steel
Codefeet supplied
without anti-slip
M 20M 24
M 30
M 16
45000
222222192727
Spindle in zinc plated steel
M 30
M 20
45000
2222272727
100140120180250
155195190250325
- Footplate material : reinforced polyamide PA FV (black).- Packaging : 8 pieces.- Anti-slip supplied separately (on request supplied fixed to the foot).- On request different length.- Fmax. = maximum applicable load in static conditions
175205205230190250
118148148165120180
297/629182297/629192297/629202297/680371N297/629212297/629222
297/629232297/629242297/629252297/629262297/688071N
121212---
1212---
---
111111
--
111111
Spindle types
Fixing holes,obtainable by breaking"diaphragm".
Accessories
- Code with reinforcement disc : 630082.- Code without reinforcement disc : 630092.- Assembly : with screws for plate supplied loose.- Material : NBR rubber (black), 80 Shore.- Packaging : 8 pieces
in reinforced polyamideArticulated Feet
- Code : 726/688772.- Material : reinforced polyamide PA FV (black).- Weight : 1,15 Kg:- Packaging : 8 pieces.
Part. 726 - Spacer
New Product
-
R32
100100
ø d
mm
FmaxN
R
h
s
ø D
A(m
m) H
(mm
)
19
ø11 N. 2 a 180
ø74ø102
ød
HA
3 3
3
Part.134
Accessories
Nut + Washer
mm
Packaging : 8 pieces.
M16M20M24M30
630212630222630232630242
630142630152630162630172
13161924
30374456
24303646
3344
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Codefeet supplied
without anti-slip
Spindle types
M 20M 24
M 30
M 16
20000
222222192727
121212---
Spindle in zinc plated steel
M 30
M 20
20000
2222272727
100140120180250
1212---
---
111111
--
111111
- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces (*= 12 pieces).- Anti-slip supplied separately.- On request different length.- Fmax. = maximum applicable load in static conditions.
118148148165120180
155185185210170230
135175170230305
134/629002134/629012134/629022134/680091N134/629032134/629042
134/629052134/629062134/629072134/629082134/688191N*
Anti-slip
- Code : 630052. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
Fixing holes,obtainable by breaking"diaphragm".
in reinforced polyamideArticulated Feet
-
R33
124124
ø d
mm
FmaxN
R
h
s
ø D
ø98,5
20
ø12,5 N. 2 - 180
ø124
HA
ød2 2
8
A(m
m) H
(mm
)
Ø 170
110
110
102,
5
Steel reinforcement disc
Part.169
Nut + Washer
mm
Packaging : 8 pieces.
M16M20M24M30
630212630222630232630242
630142630152630162630172
13161924
30374456
24303646
3344
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Anti-slip
Code
Footplate inpolyamide
PA FVCode
Footplate inpolypropylene
PP FV
feet supplied without anti-slip
Spindle types
Accessories
- Code with reinforcement disc : 630082.- Code without reinforcement disc : 630092.- Assembly : with screws for plate supplied loose.- Material : NBR rubber (black), 80 Shore.- Packaging : 8 pieces.
Fixing holes,obtainable by breaking"diaphragm".
Articulated Feetin reinforced polyamide and polypropylene
- Code : 726/688772.- Material : reinforced polyamide PA FV (black).- Weight : 1,15 Kg:- Packaging : 8 pieces.
Part. 726 - Spacer
Spindle in stainless steel
M 24M 30
M 20
M 16
45000(PA FV)13000(PP FV)
21--
212121
-2222---
• = Available upon request and minimum order quantity.-- Footplate material : reinforced polyamide PA FV (black) and reinforced polypropylene PP FV (black).- Packaging : 8 pieces.- Anti-slip supplied separately (on request supplied fixed to the foot).- On request different length.- Fmax. = maximum applicable load in static conditions.
22-
2222-
2222--
45000(PA FV)13000(PP FV)
Spindle in zinc plated steel
M 24
M 16
M 20
-21--
21--
2121
255140205270205205
20081
146218152152
133030171924
169/604993169/624802169/624812169/611523•
169/624822169/624832
-169/628682169/628692169/611633•
169/628702169/628712
255255140205205255308145205
20020081
14615419524291
152
241330301730301919
169/624842169/604983•
169/624852169/624862169/611653169/624872169/611663•
169/624882169/624892
169/628722 -169/628732169/628742169/636162169/628752169/611673•
169/628762169/628772
New Product
-
R34
3030
ø d
mm
FmaxN
R
h
s
ø D
HA
ø 30
ø d
A(m
m) H
(mm
)
in reinforced polypropyleneFixed Feet
Part.675
Accessories
Nut + Washer
mm
Packaging : 24 pieces.
M10 630182 8 2117 2
CodeStainless steel
AISI 304h
mmøDmm
smm
Spindle in stainless steel
Code
M 10
M 8
10000
80006688
- Footplate material : reinforced polypropylene PP FV (white).- Packaging : 12 pieces.- Fmax. = maximum applicable load in static conditions.
22422247
44644267
675/683422675/683432675/683442675/683452
New Product
-
R35
ø d FmaxN
3232R
A(m
m) H
(mm
)
Aø 32
H
ød
h
s
ø D
Part.753in reinforced polypropylene
Fixed Feet
Code
Accessories
Spindle in zinc plated steel
M 6
M 8
2500
M 10
M 12
- Footplate material : reinforced polypropylene PP FV (black). - Packaging : 48 pieces.- On request different length.- Fmax. = maximum applicable load in static conditions.
31364146313641465156364146515661664853586368
15202530152025303540202530354045503035404550
753/603233753/603243753/603253753/603263753/603273753/603283753/603293753/603303753/603313753/603323753/603333753/603343753/603353753/603363753/603373753/603383753/603393753/603403753/603413753/603423753/603433753/603443
Nut + Washer
mm
Packaging : 24 pieces ( for M8, M10 ). 8 pieces ( forM12 ).
M8M10M12
630102630112630122
6,5 810
172124
131719
1,622,5
CodeZinc plated
steelh
mmøDmm
smm
New Product
-
R36
5050
ø d
mm
FmaxN
R
ø49
A
H
ød
A(m
m) H
(mm
)
h
s
ø D
Part.600
Accessories
Spindle in zinc plated steel
Code
M 10 200050 30 10
- Footplate material : reinforced polyamide PA FV (black). - Packaging : 48 pieces.- Fmax. = maximum applicable load in static conditions.
600/68582
Nut + Washer
mm
Packaging : 24 pieces.
M10 630112 8 2117 2
CodeZinc plated
steelh
mmøDmm
smm
in reinforced polyamide Fixed Feet
-
R37
ø d
mm
FmaxN
5050R
h
s
ø D
1
ø 50A
H5
ø d
A(m
m) H
(mm
)
Part.602
Code
Spindle in zinc plated steel
M 85000
50 30 22 602/603523
M 10 60 40 22 602/693852
Accessories
Nut + Washer
Anti-slip
- Code : 630012. - Material : NBR rubber (black), 70 Shore.- Assembly : press-fit.- Packaging : 24 pieces.
mm
Packaging : 24 pieces.
M8M10
630102630112
6,5 8
1721
1317
1,62
CodeZinc plated
steelh
mmøDmm
smm
- Footplate material : reinforced polyamide PA FV (black). - Packaging : 24 pieces.- Fmax. = maximum applicable load in static conditions.
in reinforced polyamide Fixed Feet
New Product
-
R38
FmaxN
R
Ø 38Ø 48,3
Ø 45,3
23 min
699
73 m
ax
in stainless steelFixed Feet
Code
- Material : levelling tube in stainless steel AISI 304. Supporting base and bushing for adjusting scrrew in reinforced polyamide PA FV (black). Adjusting screw in stainless steel AISI 304. Threaded bushings in nickel plated brass.- Packaging : 24 pieces.- Fmax. = maximum applicable load in static conditions.
Stainless steel AISI 304 4000745/699062
Material
Frame supportingtubedia. 48,3 (1"1/2)thickness 1,5
Fixing system with Part.690 (bearing head).
Assembly
Frame supporting tubeDia. 48,3 (1"1/2) thickness 1,5
Levellingtube
Supportingbase
Bushingfor adjusting screw
NEW Part. 745
Part.745New Product
-
R39
110110
ø d FmaxN
R
ø110
A
H
ød
A(m
m)
H(m
m)
h
s
ø D
in reinforced polyamide Fixed Feet
Steel reinforcement disc
Part.31
31/5150
Nut + Washer
Packaging : 8 pieces.
Code
M 16 6000101 86
- Footplate material : PVC rubber black (50 Shore).- Packaging : 20 pieces.- Fmax. = maximum applicable load in static conditions.
mm
M16 630142 13 3024 3
CodeZinc plated
steelh
mmøDmm
smm
Spindle in zinc plated steel
Accessories
-
R40
8080
ø d
mm
FmaxN
R
H
ø 81ø 46
ø 6,5 N. 2
ød
A
15 15
h
s
ø D
A(m
m) H
(mm
)
Ø14,2 Ø14,2
M6
TM
antibacterial protection
®
in reinforced polypropyleneArticulated Feet Gripper
Part.626
Accessories
Protection cap
mm
Packaging : 24 pieces (for M10), 8 pieces (for M12, M14, M16, M20, M24 ).
Nut + Washer
M10M12M14M16M20M24
630182630192630202630212630222630232
630112630122630132630142630152630162
81011131619
212428303744
171922243036
22,52,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Spindle in stainless steel
Spindle in zinc plated steel
Codefeet supplied
without cap*
Spindle types
M 12
M 14
M 16
M 20
M 24
M 10
M 12
M 14
M 16
M 20
M 24
M 10
10000
10000
2b2b2b--------
---
1a1a1a1a1a1a1a1a
2b2b2b2b2b2b-
2b-
2b2b--
2b2b-
2b2b-----
------
1a-
1a--
1a1a--
1a--
1a1a1a1a1a
Dark grey WhiteBlueOrangeBlack
Colour Code
- Material : polypropy- lene PP, with Microban® antibacterial protection.
- Packaging : 24 pieces.- Customized cap with customer logo.- Other colours available upon request.
9585
145110100115160185120185185
6755
115766481
124151
84149146
1414141113131313161619
626/641392626/641402626/641412626/641712626/641722626/641732626/641742626/641752626/641762626/641772626/641782
6095
14565
100120908095
100120130150155160185195235135185250120185
3065
115357090564861688996
11612413015116520110015021481
146
1414141414141116131616131316161316161616161919
641912641922641932641942641952
• = Available upon request and minimum order quantity.*= Feet are supplied without protection caps. Caps have to be ordered separately, indicating selected colour.- Base material : reinforced polypropylene with integrated anti-slip in thermoplastic rubber grey (80 Shore). Materials are supplied with Microban® antibacterial protection.- The sealing of the internal structure guarantees a better hygiene.- Feet can be fixed to the floor.- Packaging : 24 pieces.- On request different length.- Fmax. = maximum applicable load in static conditions.
Foot base are protection cap, supplied with Microban® antibacterialprotection.By penetrating the cell wall of bacteria Microban® inhibits the growth of
most common food poisoning bacteria, such as E.coli, Salmonella, Listeria, S-aureus, Campylobacter, which can cause contamination and odour.
626/641522626/641532626/641542626/641552626/641562•
626/641572•
626/641792626/641592626/641812626/641602626/641612626/641822626/641832626/641622626/643052626/641842626/641632626/641642626/641862626/641872626/641882626/641892626/641902
Microban® antibacterial protection
-
R41
8080
ø d
mm
FmaxN
R
A(m
m) H
(mm
)
Ø14,2 Ø14,2
h
sø D
Hø 81ø 46
ø 6,5 N. 2
ød
A
15 15
M6
TM
antibacterial protection
®
Microban® antibacterial protection
Part.627
Spindle in stainless steel
Spindle types
M 12
M 14
M 16
M 20
M 24
M 10
10000
2b2b2b--------
9585
145110100115160185120185185
6755
115766481
124151
84149146
1414141113131313161619
Code feet with cap*
supplied disassembled
Codefeet with cap
supplied assembled
mm
M10M12M14M16M20M24
630182630192630202630212630222630232
81011131619
212428303744
171922243036
22,52,5334
CodeStainless steel
AISI 304h
mmøDmm
smm
AccessoriesNut + Washer
Packaging : 24 pieces (for M10), 8 pieces (for M12, M14, M16, M20, M24 ).
Foot base is supplied with Microban® antibacterial protection.By penetrating the cell wall of bacteria Microban® inhibits the growth ofmost common food poisoning bacteria, such as E.coli, Salmonella, Listeria,
S-aureus, Campylobacter, which can cause contamination and odour.
*= Feet can be fixed to the floor.- Protection cap material : stainless steel AISI 304. - Base material : reinforced polypropylene with integrated anti-slip in thermoplastic rubber grey (80 Shore). Materials are supplied with Microban® antibacterial protection.- The sealing of the internal structure guarantees a better hygiene.- Packaging : 24 pieces.- On request different length.- Fmax. = maximum applicable load in static conditions.
---
1a1a1a1a1a1a1a1a
in stainless steelArticulated Feet Gripper
627/647292627/647302627/647312627/647322627/647332627/647342627/647352627/647362627/647372627/647382627/647392
627/641972627/641982627/641992627/642102627/642112627/642122627/642132627/642142627/642152627/642162627/642172
-
R42
10100
ø d
mm
FmaxN
R
A(m
m) H
(mm
)
Ø24,5 Ø24,5Ø14,2
h
s
ø D
H
ø 102ø 63
ød
A
15 15
ø8,5 N. 2
M8
TM
antibacterial protection
®
in reinforced polypropyleneArticulated Feet Gripper
Part.622
Accessories
Protection cap
mm
Packaging : 8 pieces.
Nut + Washer
M14M16M20M24
630202630212630222630232
630132630142630152630162
11131619
28303744
22243036
2,5334
CodeStainless steel
AISI 304Zinc plated
steelh
mmøDmm
smm
Dark grey WhiteBlueOrangeBlack
637052637062637072637082639412
Colour Code
- Packaging : 24 pieces.- Customized cap with customer logo.- Other colours available upon request.
M 16
M 20
M 24
M 14
M 16
M 20
M 24
M 14
19500
19500
---
1b--
1b--
1b--
1b-
1b--
1b--
1b--
1b
--
6b--
6b--
6b--
6b-
6b--
6b--
6b--
6b-
1a1a--
1a--
1a--
1a----
1a--
1a--
1a--
--
1b--
1b---
1b--
1b-
1b--
1b-
1b--
1b--
1b--
1b-
-6b--
6b---
6b--
6b-
6b--
6b-
6b--
6b--
6b--
6b--
1a--
1a--
1a1a--
1a----
1a----
1a--
1a--
1a--
1a
115105115115120150150165185185190200200120120125185185190120120190220220
7664746581
109100124144135151159150
767484
141139149
7974
146179172
111324131324131324131324132416162416162419192419
959595
100130130135155160160190195195120120140155155185185190250250255120120125185185190
56544861898396
116119113151154148
7674
100111106141139150206204214
797981
144139146
112413132413131324131324132416162416241616241616241919241919
Codefeet supplied
without cap*
Spindle types
• = Available upon request and minimum order quantity.*= Feet are supplied without protection caps. Caps have to be ordered separately, indicating selected colour.- Base material : reinforced polypropylene with integrated anti-slip in thermoplastic rubber grey (80 Shore). Materials are supplied with Microban® antibacterial protection.- The sealing of the internal structure guarantees a better hygiene.- Feet can be fixed to the floor.- Packaging : 24 pieces.- On request different length.- Fmax. = maximum applicable load in static conditions.
Foot base are protection cap, supplied with Microban® antibacterialprotection.By penetrating the cell wall of bacteria Microban® inhibits the growth of
most common food poisoning bacteria, such as E.coli, Salmonella, Listeria, S-aureus, Campylobacter, which can cause contamination and odour.
Spindle in stainless steel
Spindle in zinc plated steel
- Material : polypropy- lene PP, with Microban® antibacterial protection.
622/643542622/643552622/637262622/640362•622/643562622/637272622/640372•622/643572622/637282622/640382622/643582622/637292622/640392622/637442•622/637302622/643592622/637452622/637312622/643602622/637322622/640402•622/643612622/637332622/640412
622/643622622/637342622/640422•622/643632622/637352622/640432622/643642622/643652622/637362622/640442•622/643662622/637372622/640452•622/637462•622/637382622/643672622/637472•622/637392622/637482•622/637402622/643682622/637492•622/637412622/643692622/637422622/640462622/643702622/637432622/640472622/643712
Microban® antibacterial protection
-
R43
10100
ø d
mm
FmaxN
R
h
s
ø D
Hø 102ø 63