formZ tips & techniques �1

[1] Project Settings: Working UnitsMedium (Building)

formZ tips & techniques �2

[2] Project Settings: AppearanceformZ classic: white background

[3] Project Settings: Layershighlght picked checkmarked

[4] Project Settings: Objectshighlght picked checkmarked

formZ tips & techniques �3

[5] Project Settings: Project FilesKeep Backup checkmarked

[6] From Palettes choose Snap options; check mark Snap to Ghost

formZ tips & techniques �4

[7] Copy and Paste (on Active Layer) existing figures to new layers.

[8] “Pop” the surfaces into solids using the Derive / Extrusion tool.

formZ tips & techniques �5

[9] Devise a layer height system. Heights can be 1ft, 2ft, 4ft, 8t, etc. The height for the overall relief is limited to a maximum of 15 foot height.

[10] Every traced element must be a surface (a closed shape) in order to extrude it into a solid.

formZ tips & techniques �6

[11] Lines can be made into surfaces using Derive / 2d Wall

[12] Lines can be made into vertical surfaces using Derive / Extrusion tool

formZ tips & techniques �7

[13] Use V-Line or Rectangle to trace surfaces over Orthogonal schema.