( acquire ) ( transmit ) ( share ) wds wireless digital system for intra-oral radiography with...
TRANSCRIPT
( acquire )
( transmit )( share )
WDS
Wireless Digital Systemfor intra-oral radiographywith Bluetooth technology
know any better than wireless?
CCD sensor
X-ray
precedingprecedingthethebreachbreach
cable damage is the number one cause of sensor malfunctioncable damage is the number one cause of sensor malfunction
about strings attached?
nice and clean
• 0,6m cable only.
• Stronger and difficult to breakif compared to 3m cables.
• Prevents the sensor fromdropping on the floor.
• No power supply cords.
proven technology
• CCD ( acquire )
state of the art three-layers receptor (scintillator, fiber-optics, CCD)
• Bluetooth ( transmit )
nominative transmission avoids interference,economic off-the-shelf receivers
• TWAIN ( share )
consumer standard, highest degree of compatibility with third party software applications (just like a flatbed scanner)
size 1size 1
1.50 M.pixels1.50 M.pixels6.00 cm6.00 cm22
size 2size 2
2.04 M.pixels2.04 M.pixels8.16 cm8.16 cm22
two sensor sizes available
quick and easy
• Enhanced image transfer.
• Improved workflow during multiple image acquisition.
• Easy configuration.
• Broad compatibility with third party software.
• Wide range of Bluetooth receivers.
exceptional image quality
Regardless of the imaging application in use, thanks to the proprietary PREVIEW window, with image enhancements.
workflow speed
Fast image transfer (average 5 to 10 seconds) and very short pause between multiple image acquisitions.
The speed is comparable to wired systems, with the additional freedom of a wireless handheld device.
ease of setup
Search and selection of sensors in use is done only once, at installation time, through the MyRay Monitor utility.
No need for further settings during the day by day operation.
broad selection of receivers
WDS is compatible with any* Bluetooth receiver, embedded or external.
*Note: the performance with third party Bluetooth receivers cannot be granted, due to the great variety of manufacturers and models. Make sure you chose a Bluetooth receiver that features BROADCOM-WIDECOMM components (the most widespread). Some of the off-the-shelf receivers may also perform slower than the MyRay Bluetooth Dongle.
One MyRay Bluetooth Dongle is also supplied.
exposure time in
seconds
WDSmode
0,080 0,060 0,050 0,060 0,040 0,050 0,060 sensitivity
0,250 0,200 0,160 0,200 0,125 0,160 0,200 resolution
0,050 0,040 0,031 0,040 0,031 0,031 0,040 sensitivity
0,160 0,125 0,100 0,125 0,080 0,100 0,125 resolution
flexibility of the exposure settings
SENSITIVITY MODE- very low x-ray dose per image- dose 3 to 4 lower than F-speed films
RESOLUTION MODEsame exposure as F-speed films -
best resolution -
simple access to the preferences
At installation time or during the acquisition, it is possible to set the preferences, such as:
- enable the image preview,- select sensibility or resolution.
new MyRay sensor holders
Easier to position.Four color-coded aiming devices with collimating ring.Very simple assembly.
Wireless Competitors
Satelec / SoproSopix Bluetooth
OwandyKrystal-X WiFi
Satelec / Sopro – Sopix Wireless
PROs:PROs:--similar to the WDS conceptsimilar to the WDS concept
CONs:CONs:-sensor not protected by FOP-sensor not protected by FOP**-no display: difficult multi-sensor -no display: difficult multi-sensor and multi-op handlingand multi-op handling
-no charging base-no charging base
*FOP - Fiber Optics Plate*FOP - Fiber Optics Plate
Not just
sensor name
status and transmission
computer name
battery level
the display is indispensablethe display is indispensablefor controlling the multi-op for controlling the multi-op activity:activity:
it shows every instant which it shows every instant which computer is the sensor computer is the sensor connected to, and the connected to, and the acquisition status. acquisition status.
the FiberOptics Plate
widely adopted in Radiology
two main benefits: it protects the CCD from direct x-ray
exposure it eliminates the scattering of light
generated by the scintillating layer
the sensors without FOP are thinner, but they cannot achieve the same resolution (Lp/mm) nor the same life expectation of those with FOP
without FOP with FOP
tech tech insightinsight
Owandy – Krystal-x WiFi
PROs:PROs:--WiFi fast transmissionWiFi fast transmission
CONs:CONs:-bulky heavy electronics*-bulky heavy electronics*-prone to wireless interference-prone to wireless interference-wide range only (30 to 50 m.)-wide range only (30 to 50 m.)-one sensor size only 34x24 (#2)-one sensor size only 34x24 (#2)
*WiFi has demanding battery requirements*WiFi has demanding battery requirements
Bluetooth vs. WiFi
Security and interference*Security and interference*
Bluetooth wireless technology is the most secure and robust short range Bluetooth wireless technology is the most secure and robust short range wireless technology available todaywireless technology available today for PAN**, with fast frequency hopping that for PAN**, with fast frequency hopping that efficiently battles interference in dense user environments with many overlapping efficiently battles interference in dense user environments with many overlapping networks. networks.
Bluetooth wireless technology has excellent authentication and built in security. Bluetooth wireless technology has excellent authentication and built in security.
Wi-Fi can have maximum three overlapping network before you start to experience Wi-Fi can have maximum three overlapping network before you start to experience severe interference and bandwidth reduction. severe interference and bandwidth reduction.
Wi-Fi uses 22 static channelsWi-Fi uses 22 static channels which need to be manually reconfigured vs. which need to be manually reconfigured vs. Bluetooth wireless technology automatically “reconfigures” for optimum channel Bluetooth wireless technology automatically “reconfigures” for optimum channel usage over the entire available spectrum.usage over the entire available spectrum.
*both WiFi and Bluetooth*both WiFi and Bluetooth wireless technologies operate in the unlicensed, 2.4 GHz ISM wireless technologies operate in the unlicensed, 2.4 GHz ISM band (i.e. cordless phones operate in the 2.4 GHz spectrum).band (i.e. cordless phones operate in the 2.4 GHz spectrum).
**peripheral area network**peripheral area network
tech tech insightinsight
Bluetooth vs. WiFi
Bluetooth wireless technology uses a fifth of the power Bluetooth wireless technology uses a fifth of the power compared to Wi-Fi, which is crucial for small battery operated compared to Wi-Fi, which is crucial for small battery operated devices.devices.
Wi-Fi is best suited for WLAN* devices with a power cord or Wi-Fi is best suited for WLAN* devices with a power cord or large battery.large battery.
*Wireless Local Area Network*Wireless Local Area Network
tech tech insightinsight
exposure time in
seconds
0,080 0,060 0,050 0,060 0,040 0,050 0,060
0,400 0,240 0,180 0,180 0,120 0,180 0,240
patient safety first
Side by side comparison of the dose required by:- MyRay WDS- Kodak RVG6000
Why giving 3-4 times more dose if you can choose?