&. © 2013 sensor switch combining time-based, sensor- based, daylight-based, & manual...

• Combining Time-Based, Sensor-Based, Daylight-Based, & Manual Control, nLight provides an elegant solution for any control requirements.

A Fusion of Lighting Control Strategies


Flexible

• Relays & dimming outputs can be singular devices or combined within occupancy sensors, photocells, wall controls, or panels to minimize device count & overcome any design challenge.

+ +Relay DimmerOcc

Sensor = nCMR 9 ADC


Scalable

• Designed to function standalone within a room or networked together across an entire facility or campus, nLight spans applications of all sizes.


Topology Free

• nLight devices can be connected in any order and network configuration, making initial installation and future modifications quick and easy.


Built on Technology by Sensor Switch

• All nLight occupancy sensors incorporate Sensor Switch’s advanced Passive Infrared & patented Microphonics Passive Dual Technology.


Bacnet IP Compatible

• nLight seamlessly communicates with BMS systems via a single network connection to SensorView; no additional hardware, wiring, or device level configuration is required.


Future Proof

• All nLight devices are remotely upgradeable, allowing installed networks to adapt to changing technology and incorporate newly developed features.


Sophisticated Yet Cost-Effective

• The nLight Graphic WallPod® provides a stylish full color touch-screen room control at a fraction of the cost of other manufacturers’ solutions.


Contractor Friendly

• With convenient CAT-5 connections, reversible line/load wiring, no sensor sensitivity adjustments, & intuitive LED feedback that self-diagnoses common installation errors, nLight reduces labor time vs traditional low voltage systems.


Web-Based

• The nLight SensorView software suite uses standard web browsers, facilitating remote access & operation from anywhere in the world.


A Performance Monitoring Tool

• SensorView’s GreenScreen software plug-in collects & displays key energy & lighting control performance indicators.


• Other digital control systems rely on room controllers, network servers, or panels. nLight’s fully distributed intelligent devices make their own switching & dimming decisions, preventing single failure points from taking down entire networks.

Reliant on

Centralized Intelligence


Just for Controlling

Fluorescent Lighting

• Several LED luminaires such as Lithonia’s RTLED come “nLight-enabled” standard, providing digital addressability, smooth continuous dimming, advanced lumen management, & direct connection to other nLight devices. Additionally, the RTLED solution removes the need for all relays & bus power supplies, thus saving cost & labor.


Limited to Low Voltage Dimming

• In addition to offering 0-10 VDC dimming outputs on sensors, WallPods, relay packs, & photocells, nLight can phase dim both incandescent and 2 & 3 wire fluorescent luminaires.]


A Wiring Nightmare

• Traditional control systems are wired with home-runs or as long buses that snake throughout a building connecting several rooms... what a nightmare! In contrast, each nLight controlled room is wired as its own local bus of devices off a network backbone. This difference makes wiring an nLight network simpler, adds to system intuitiveness, increases overall robustness, & reduces labor costs.


Power Hungry

• nLight devices’ ultra-low current draw & patent pending “power redistribution” architecture enable power to be shared between lighting zones, eliminating the need for a power supply in every zone.


Restricted to Trad’l

Switches/Dimmers

• “Virtual” WallPod® switches & dimmers can be downloaded to a desktop as a taskbar application or on a smartphone. Additionally, nLight offers contemporary capacitive “Touch” WallPods with an audible clicker and no moving parts.


Only Used with New Construction

• Because of its distributed architecture and flexible design options, nLight is cost-effective even for the most ROI sensitive retrofit projects.


Green… It’s Field Proven!

• While nLight is an energy saving “Green” product, it is far from Green in experience. With networks from Alaska to Florida, California to Nova Scotia & everywhere in between, nLight’s field support engineers have the experience for any installation size or application.


Made Outside the U.S.A.

• Every nLight device is 100% manufactured from electronic components in Wallingford, CT, making compliance with ARRA & Buy American guidelines a no-brainer.


&. © 2013 sensor switch combining time-based, sensor- based, daylight-based, & manual...

Documents

sensor switchscalabledesigned

sensor switchflexiblerelays

sensor switchsophisticated

sensor switchbuilt

sensor switchcombining

sensor sensitivity adjustments

nlight spans applications

nlightenabled standard