what is nlight? nlight is a networked digital lighting control system that provides both energy...
TRANSCRIPT
- Slide 1
- Slide 2
- What is nLight? nLight is a networked digital lighting control system that provides both energy savings & increased user configurability by cost effectively integrating time-based, daylight-based, sensor-based & manual lighting control schemes.
- Slide 3
- Slide 4
- How does nLight work? nLight networks together intelligent digital devices including occupancy sensors, photocells, power packs, wall switches, dimmers, panels, and even luminaires; creating a system with an unmatched level of distributed intelligence
- Slide 5
- Slide 6
- What is Distributed Intelligence? Digitally Addressable - Locally makes switching & dimming control decisions no central controller Self-Commissioning Stand-alone Operation
- Slide 7
- Slide 8
- Slide 9
- Slide 10
- Slide 11
- Slide 12
- Slide 13
- Slide 14
- Slide 15
- nLight Devices Model numbers start with the letter n RJ-45 style communication ports All devices consist of one or more of basic lighting control components o sensor o relay o manual control station o dimmer DEFINITION: A device having the ability to communicate over an nLight network.
- Slide 16
- Example Combinations of Lighting Control Elements Lighting Control Elements Sensor Relay Manual Control Station Dimmer Model Number Examples OccupancyPhotocell nCM PC nCM 9 nCM 9 ADC nCMR 9 ADC nPODM nPODM D nPODMR D nWSX nIO D nPP16 nPP16 D
- Slide 17
- GTL SERIES nLight-enabled Luminaire Families (w/ integrated nIO or nPP16 D) DEFINITION: A luminaire with a factory installed nLight device. More added all the time!
- Slide 18
- Slide 19
- nLight Control Zone Zones are wired together using CAT-5e cable (in any order, daisy-chain recommended) May have a single or several different devices types May have multiple devices of the same type Can be sub-divided into 16 local groups (channels) of occupancy, photocell, and switch control Functions stand-alone if disconnected from Gateway/SensorView DEFINITION: A collection of nLight devices and nLight-enabled luminaires that function together in order to control a spaces lighting.
- Slide 20
- Example Zone Designs Private Office 1 Single Level Control Devices Used nCM PDT 9 nPODM WH nPP16 nPODM WH
- Slide 21
- Single Level Control Bi-Level Control Devices Used nCM PDT 9 nPODM 2P WH nPP16 nSP16 Example Zone Designs Private Office 2 nPODM 2P WH
- Slide 22
- Single Circuit Control w/ One Daylight Harvesting Zone Devices Used nCM PDT 9 nPODM DX nPP16 nCM ADC Example Zone Designs Private Office 3 nPODM DX
- Slide 23
- Fixture Level Control w/ Dual Zone Daylight Harvesting Devices Used nCM PDT 9 nPODM 2P DX nCM ADCX Example Zone Designs Private Office 4 nCM ADCX
- Slide 24
- Slide 25
- Slide 26
- Slide 27
- nLight Network Backbone DEFINITION: The communication network which interconnects nLight zones and the Gateway / SensorView software Backbone devices include Bridges Gateways nWiFi Devices nGWY 2
- Slide 28
- Added System Features Provided by nLight Backbone Remote configuration and custom commissioning Run time-based and on demand control profiles (such as load shedding) Virtual switches and dimmers can control an occupants lighting from computer and smartphone-based applications Real-time lighting, photocell, and occupancy status collection and analysis Provides required connectivity for third party BMS via BACnet IP control Remote upgrading of all system devices Global Groups
- Slide 29
- Multi-Backbone Network Architecture X
- Slide 30
- Slide 31
- SensorView Properties
- Slide 32
- SensorView Settings
- Slide 33
- SensorView Status
- Slide 34
- SensorView Profiles
- Slide 35
- SensorView Updates
- Slide 36
- SensorView Green Screens Network Totals
- Slide 37
- SensorView Green Screens Admin Baseline Operating Hrs. Savings units (kWH, $, CO2) Peak/Off Peak Hrs.
- Slide 38
- SensorView Green Screens Zone Details
- Slide 39
- Relay State Occupancy Time Delays Total Light Levels