© 2011 autodesk living the dream: how to automate common workflows and tasks for mechanical...
TRANSCRIPT
© 2011 Autodesk
Living the Dream: How to Automate Common Workflows and Tasks for Mechanical EngineersPlamen HristovVirtual Design Manager
© 2011 Autodesk
Plamen Hristov
• Engineering Degree – Sofia, Bulgaria
• Architectural Technology – MCTC, Minneapolis
• 5+ Years Teaching, Consulting, and Support Services
• Certified Implementation Expert in Revit MEP
• Lectured at two colleges
© 2011 Autodesk
Learning Objectives
At the end of this class, you will be able to:
Create a diffuser family with auto-sizing neck Create a VAV box that automatically selects its size based on the connected CFM Export and import of gbXML “Push” load calculation data into spaces, zones, diffusers, and VAV boxes
© 2011 Autodesk
Create a Diffuser Family With Auto-Sizing Neck
© 2011 Autodesk
The Diffuser Features
Parametric Manufacturer specific sizes Parameters to fill out the schedule Auto sizing neck based on connected air flow Tag
© 2011 Autodesk
Create a VAV Box that Automatically Selects its Size Based on the Connected CFM
© 2011 Autodesk
The “Universal” Single Duct VAV Box Features…
Parametric Manufacturer specific sizes Parameters to fill out the schedule Control box Clearance requirements Pipe and duct connections Reheat coil Right and left hand VAV box Air Flow data Parameters to fill out the schedule
Attenuator - with variable connector configurations
Attenuator check - duct connected to the attenuator must be at least 2" smaller
Auto sizing based on connected air flow Override of auto sizing - used when there is
not diffusers yet, or in special conditions MBH and GPM calculations Tag
© 2011 Autodesk
Display Level Detail
VAV box
VAV box with clearance
VAV box with clearances and reheat coil
VAV box with clearances, reheat coil, attenuator
VAV box with clearances, reheat coil, attenuator and duct lining
© 2011 Autodesk
Export and Import of gbXML
© 2011 Autodesk
DO - “Water Tight” Building
© 2011 Autodesk
DO - Delete Duplicate and Unbound Spaces
© 2011 Autodesk
DO - Assign Wall Functions
© 2011 Autodesk
DO - Ceilings Must not Bound Rooms and Spaces
© 2011 Autodesk
DO - Create Custom Tags to Display Energy Analysis Data
© 2011 Autodesk
DO - Assign Spaces to Zones
© 2011 Autodesk
DON’T – Over Model
© 2011 Autodesk
Don’t Model Individual Floor Slabs per Rooms
© 2011 Autodesk
Don’t Edit Wall Profile – Use Openings and Objects Instead
© 2011 Autodesk
Space names and numbers Zones - All zone data except the
Relative Humidity Walls Thermostat data Adjacent space name and number People occupancy Lighting and misc load are loaded in
the space not in the template Power Load in Revit = Misc Load in
Trane
What Goes to Trane?
© 2011 Autodesk
Doors on curtain walls Construction types and U factors Modifications to walls profiles Shading elements Building location Weather data Roof tilt angles Space separation lines
What Doesn’t Go to Trane?
© 2011 Autodesk
“Push” Load Calculations Data Into Spaces, Zones, Diffusers, and VAV Boxes
© 2011 Autodesk
The Workflow…
Prepare the Revit model Create a new “Link” using the Ideate
BIMLink Export the “Link” to Excel Process the data in Excel Import back into Revit using Ideate
BIMLink Verify the imported data
© 2011 Autodesk
Summary
Diffuser and VAV Box Families Automating Size Selections
Rules of DOs and DON’Ts When Working with gbXML
“Push” load calculation data into spaces, zones, diffusers, and VAV boxes
© 2011 Autodesk
Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.