zp easy - logismarketes.cdnwm.com · sm-022-042011-en machine leaflet a.m.r.p. handels ag...
TRANSCRIPT
SM-022-042011-en
M A C H I N E L E A F L E T A.M.R.P. HANDELS AGVogesenstrasse, 132 - Postfach 371 - CH - 4012 BaselTel.: +41 61 3868686 - Fax: +41 61 3868602E-mail: [email protected] - www.campackaging.it
GB Gnudi Bruno s.p.a.Via Ernesto Masi, 9 - 40137 Bologna - ItaliaTel.: +39 051 4290611 - Fax: +39 051 392376E-mail: [email protected] - www.gbgnudi.it
This publication supersedes and replaces any previous edition and revision. All rights reserved.No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without permission of Tecnicam s.r.l. (Bologna - Italy).The technical data are not binding and may be subject to change without prior notice.
ZP EASYAutomatic palletizer forshipping cases
TECHNICAL DATA
Mechanical speed STROKES/1’ max. 12
Power absorption (max.) KW 2
Air consumption Nl/Cycle 5
Air pressure bar 6
Gross weight kg ~1250
Net weight kg ~750
Size range min. max.
A 120 600
B 12 500
C 120 600
E - 1016
F - 1219
EF
max.1800
130
CA
B
2306
2584
3406
SM-022-042011-en
M A C H I N E L E A F L E T A.M.R.P. HANDELS AGVogesenstrasse, 132 - Postfach 371 - CH - 4012 BaselTel.: +41 61 3868686 - Fax: +41 61 3868602E-mail: [email protected] - www.campackaging.it
GB Gnudi Bruno s.p.a.Via Ernesto Masi, 9 - 40137 Bologna - ItaliaTel.: +39 051 4290611 - Fax: +39 051 392376E-mail: [email protected] - www.gbgnudi.it
This publication supersedes and replaces any previous edition and revision. All rights reserved.No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without permission
of Tecnicam s.r.l. (Bologna - Italy).The technical data are not binding and may be subject to change without prior notice.
CAM has recently developed the ZP-Easy mo-del, a palletizer characterized by its low price, its versatility, and its ability to perform in not optimal working environments.In particular:
• all commands related to grasping head move-ment and product positioning have been instal-led on the top part of the machine. This allows the ZP-Easy to lend itself to use in working en-vironments may they have floors that are dusty, wet, or even corroded by liquids;
• injury-preventive protections have been manu-factured in steel grid.
Another important characteristic of the machine is its disposition versatility. In fact, various posi-tioning points of the infeed conveyor are possible (linear, or at a 90° angle both on one side and the other of the machine) and, consequently, positio-ning of the pallet feeder (fig. 1) and the electrical cabinet are also variable. This allows the configu-ration of the machine to adapt itself to all different
types of space requirements.Furthermore, it is important to underline that:
• the infeed conveyor has a length that allows sufficient “buffering” in the pallet change pha-se, without the need of increasing machine di-mensions;
• the machine, in its standard version, can stack products up to a height of 1800 mm (pallet ex-cluded);
• the operator panel may be interfaced with an external PC in order to carry out automatic configuration of product formats;
• it is possible (upon request) to carry out on-line remote technical support for the machine.
Analogously to the ZP1 model, it is possible to install single or multiple suction-cup or clamp gra-sping systems (fig. 2) on the ZP-Easy as well. The machine is furthermore predisposed to han-dle not only case-packs, but even bags of large sizes.
1
2