z-purlin.pdf
TRANSCRIPT
-
8/10/2019 Z-purlin.pdf
1/4
Z purlinOur pre-punched purlins are quick to install and suitable for both insulated and uninsulated roofs and walls.
The thickness and height of the purlin selected depend on span length and loads. To optimise the design, use our
PurCalc software.
Applications:
Industrial construction
Hall and warehouse construction
Extension construction and renovation
The information on our web site is accurate to the best of our knowledge and understanding. Although every effort has been made to ensureaccuracy, the company cannot accept any responsibility for any direct or indirect damages resulting from possible errors or incorrectapplication of the information of this publication. We reserve the right to make changes.
Copyright 2014 Rautaruukki Corporation. All rights reserved.
Document printed on 25.06.2014 www.ruukki.com
-
8/10/2019 Z-purlin.pdf
2/4
Properties
Section type: Z-sections
Height: 100, 120, 150, 200, 250, 300, 350 mm
Thickness: 1.03.0 mmMinimum length 1600 mm
Maximum length 18500 mm
Material: Hot galvanised steel sheet
Steel quality S350GD+Z275 according to EN
10346
Tolerances: Roll formed products EN 10162
Press-braked products EN 10162 and EN
1090-2
Material EN 10143
Dimensioning: It is advisable to use PurCalc software whendimensioning lightweight purlins. Dimensioning
curves are also available.
Lightweight purlins Z cross-section geometries
Type ofpurlin
Thickness Height Width of wideflange
Width of narrowflange
Fold Weight Cross-sectionarea, gross
Cross-section area,effective
tnommm
Hmm
Amm
Bmm
Cmm
gkg/m
Acm2
Aeffcm2
Z100 1 100 45 39 18 1.63 2.03 1.16
1.2 45.4 39.4 18 1.96 2.45 1.65
1.5 46 40 18 2.45 3.08 2.39
2 47 41 18 3.27 4.13 3.61
Z120 1 120 45 39 18 1.81 2.22 1.16
1.2 45.4 39.4 18 2.17 2.68 1.65
1.5 46 40 18 2.71 3.37 2.4
2 47 41 18 3.61 4.52 3.65
Z150 1 150 45 39 18 2.04 2.51 1.15
1.2 45.4 39.4 18 2.45 3.03 1.64
1.5 46 40 18 3.06 3.81 2.39
2 47 41 18 4.08 5.11 3.67
Z200 1.5 200 70 62 26 4.36 5.5 2.65
2 71 63 26 5.81 7.38 4.6
2.5 72 64 26 7.26 9.25 6.5
3 73 65 26 8.71 11.13 8.49
Z purlin
2
-
8/10/2019 Z-purlin.pdf
3/4
-
8/10/2019 Z-purlin.pdf
4/4
Type of hole Diameter (mm) Rotation ()
1831.7 90
1835 90
2035 90
525 90
Design tools
Our PurCalc software is constantly improved and updated to easily design and optimise Ruukkis lightweight purlin
sections.
Choosing the right filters will help you to select the right product characteristics. The software enables the calculation of
various roof purlin systems, whether the purlins are restrained by trapezoidal sheeting or roof sandwich panels. Download
PurCalc
Order & delivery
Use Ruukki's optimisation software PurCalc to design the purlin structure.
Please provide the following information in the order:
Type of purlin
Thickness
Length
Number
In case of pre-punched purlins, please send us purlin drawings showing the location of the holes.
Note! Our standard raw material for purlins is S350GD+Z275.
Declaration of Performance
The content of this document has been created from web page last updated 23 Sep 2013
Our sales and technical support are happy to give you more information. Visit www.ruukki.com/contact-us.
Z purlin
4