yuanbo engineering co., ltd. · non-asbestos gasket is a general purpose sheet material reinforced...

Address: Industrial Zone No 88,

Hengshui, Hebei, China.

Mobile: +86-18230186461Tel: +86-318-8888385Fax: +86-318-2635158Skype: Cheryl Zhang

E-mail: [email protected]: www.forseall.com

YuanBo Engineering Co., Ltd.

mailto:sales%40forseall.com?subject=

http://www.forseall.com

YuanBo Engineering Co., Ltd.

SEALING MATERIAL CATALOG

Sealing Gasket Sealing TapeBraided Packing More

CONTENTS

Sealing Gasket Metallic Gasket

Copper Gasket 04

Non-MetallicPTFE/Teflon Gasket 05

Graphite Gasket 06

Non-Asbestos Gasket 07

Asbestos Gasket 08

Rubber Gasket 09

EDPM Gasket 09

NBR Gasket 09

Neoprene Gasket 10

Viton Gasket 10

Silicone Gasket 11

Semi Metallic GasketReinforced Graphite Gasket 12

Spiral Wound Gasket 13

Corrugated Metal Gasket 15

Metal Jacketed Gasket 17

Sealing TapePTFE Sealing Tape 21

Anti-Splash Tape 23

Braided Packing Graphite Packing 25

PTFE Packing 26

More Sealing MaterialsOil Seal 27

V Seal 30

03

04

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Copper GasketsGood Jointing and Sealing Performance

Copper gaskets are commonly known as oxygen-free copper solid copper gasket. They are stamped from 1/4 hard, high purity, oxygen free copper stock.The design of the gasket is an object used to seal the joint between two surfaces or objects in order to prevent leaks, corrosion or contamination in a system where the two objects being joined are not perfectly matched. In addition, copper is a very soft metal. This means it can provide a cushion or support between objects or parts in the system.What’s more, copper gaskets have good jointing and sealing performance which makes them widely used on engines and flanges.

Available shapesSpecial shapes can be customized according to your requirements.

O-ring copper gaskets

2-bolt copper gaskets

3-bolt copper gaskets

Customized copper gasket-01

Customized copper gasket-03

Features

Applications

● Superior thermal conductivity.This feature stabilizes the head and block temperature.

● Oil resistance.

● Corrosion resistance.

● 25% coefficient of elasticity.

● High tensile strength.The tensile strength of copper is about 32000 psi.

● Copper gaskets are used to mate two vacuum flanges together.

● Engines. Copper head gaskets are the superior choice forblown, nitrous, turbo-charged and high compression engines.And the automotive and aerospace industries are the biggestconsumers.

● Pipelines.

Copper gaskets for flange

Copper gaskets for engine

Copper gaskets for pipeline

Common specifications

Section Item OD (mm)

ID (mm)

Thickness (mm)

CG-01 16 12 2CG-02 21 16 2CG-03 35 26 2CG-04 48 37 2CG-05 62 52 2CG-06 99 82 2CG-07 120 101 2CG-08 171 152 2CG-09 222 203 2CG-10 294 269 2

OD

Thickness

ID

Note: Special sizes can be customized.

mailto:ales%40forseall.com%0D%0D?subject=


05Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

PTFE GasketIdeal Gasket Solution for Higher Bolt Loads Equipment

PTFE Gasket is made of synthetic fluoropolymer of tetrafluoroethylene.It has highly resistant to chemicals, solvents, caustics and acids, except for alkali metals and fluorine gas. In addition, PTFE also has a very low surface energy and conforms to FDA regulations.PTFE gasket provides excellent sealing performance in corrosive environments.It can be used as flange gasket in the chemical industry, machine and equipment industry and piping.

Materials types● Virgin Teflon gaskets. Virgin Teflon gaskets are produced directly from pure material. They are used in the majority of general applications due to the most cost- effective type of PTFE material and possessing the greatest physical and electrical insulation properties.

● Filled Teflon gaskets. Filled Teflon gaskets are made from virgin PTFE material with an added substance to improve their sealing properties. The gaskets materials exhibit strong physical characteristics, the strength can be altered depending on the type of filler that is used to enhance the material.

● Expanded Teflon gaskets. Expanded Teflon gaskets are produced through virgin PTFE being expanded in a manner that creats uniform tension strength across the material. This process results in a PTFE material that carries no structural weakness and more flexible. They also exhibit the unique chemical resistant properties of virgin PTFE due to the fact that no additives are added.

Virgin teflon gaskets

Features

Classical applications

● Excellent sealing at high temperatures and pressures.● Non-corrosive, non-wetting, non-contaminating and odourless.● Excellent electrical and thermal insulation in virgin PTFE form.● Excellent chemical and mechanical resistance.● Very low gas leakage (complies with German Fugitive Emission Regulation TA-Luft).● Minimized cold-flow and creep behaviour.● Ideal for aggressive chemicals.● Long service life.● Easy to handle and cut.

● Electrical Applications. (corrosion-resistance, exposure to high and low temperatures)● Food & Beverage. (secure seals and long product life)● Petrochemical & Chemical Processing. (corrosion-resistance, exposure to high and low temperatures and high surface wear)● Pulp and Paper. (long product life)● Pharmaceuticals. (secure seals and long product life)● Rail-Tank Car. (high temperature and surface-wear resistant)


Chemical industry pipes gaskets

Impeller PTFE gasket

Pharmaceutical tri-clamp

Item Thickness (mm)

Inner Diameter

(mm)

Outer Diameter

(mm)PG-01

0.8–20

22 47.5PG-02 34 66.5PG-03 43 76PG-04 49 85.5PG-05 61 104.5PG-06 73 124PG-07 273 339.5PG-08 324 409.5PG-09 407 514PG-10 508 606.5

Expanded teflon gaskets

Filled teflon gaskets



06

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Flexible Graphite GasketHigh Quality Sealing Material

Flexible graphite gasket is also called expanded graphite gasket. It consists of a pure exfoliated flake material and contains no binder or filler.In addition, the amount of carbon present in the sheet is a key determinant of its flexibility: the higher the percentage of carbon present, the more flexible the sheet. Flexible graphite gasket contains a carbon content of between 95 percent and 99.9 percent. What's more, it has good corrosion, high/low temperature and high pressure resistance performance. All these make it a critical sealing solution for some applications. Such as pipes, valves and pumps.

Available shapesSpecial shapes can be customized.

Flexible graphite gasket 01

Features

Applications

● Corrosion resistance. Resistant to a variety of acids, alkalis and salt solutions, organic compounds and heat transfer fluids.● High purity. The standard gasket has a purity of 95% to 98% and a nuclear grade purity of 99.9%.● High/Low temperature resistance.● High strength.● High pressure resistance.● Good compression resilience.● Excellent sealing characteristic.● Wear resistance.● Thermal conductive● Low creep relaxation.● Easy fitting.

● Pipes.● Valves.● Pumps.● Heat exchangers.● Condensers.

Flexible graphite gasket for valve

Flexible graphite gasket for exhaust pipe


● Density: 0.7–1.0 g/cm3● Compressibility (ASTM F36A): 30%● Recovery (ASTM F36A): ≥ 10%● Pressure: 40 bar● Temperature: -240 °C to 550 °C● PH: 0–14

● Generators.● Air compressors.● Exhaust pipes.● Refrigerators.● Flanges.





07Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Non-Asbestos GasketGood Alternative to Compressed Asbestos Gasket

Non-Asbestos Gasket is a general purpose sheet material reinforced with high-grade asbestos- free fibers and bonded with heat-resistant nitrile rubber.It has excellent anti-stick performance on both sides. It is a good alternative to compressed asbestos gasket.The gasket is suitable for engineering, auto mobile, chemical, oil & gas, petro chemical, power generation, paper, glass & ceramic, sugar, steel, smelter, boiler, pharmaceutical, Marin and all applications where needs higher temperature and pressure resistance and where non-critical gaseous and liquid media have to be sealed off.

Features


● Impermeability● Compressibility● Stress relaxation, creep resistance● Resilience● Temperature resistance● Premium quality

● Oil and gas● Chemical processing● Pharmaceutical equipment● Sea water equipment● Heat exchangers● Condensers● Pulp and paper industry● Power generation


In mechanical seals

In flange

● Excellent durability● Cost effective● Excellent Heat and Pressure● Chemical Resistant● Have good resistance to natural gases● Anti stick● Anti corrosion

Thickness (mm) 0.4–6.0

Available size(m)

1.5 × 1.6, 1.5 × 2, 1.5 × 3, 1.5 × 4, 1.5 × 6

Maximum Continuous Working Temperature 650 °F

Steam Max Continuous Working Temperature -100 °F

Maximum Pressure 85 bar

Tensile Strength (MPa) ≥ 13

Residual Stress (MPa) > 22

Compressibility 6%

Cold Compressibility 8%

Cold Recovery 3%

Hot Creep 22%

Hot Recovery 2%

Density (g/cm³) 1.6–2.0

Gas Permeability (mL/min.) <0.3

Color

Black, white, red, blue,

orange



08

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Asbestos Gasket Ideal Insulating and Corrosion Resistant Material

Asbestos Gasket is inexpensive, readily available and stable. It is fireproof and can withstand extreme heat making it the ideal thermal isolation material. As well, asbestos gaskets are non-corrosive, impervious to chemical reactions and non-conductive of electricity.It is widely used in exhaust systems, turbo chargers and cylinder.

Fiber Types

Features


● High seal ability.● Accurate dimension.● High strength.● Smooth surface, no bubble, no leakage ,no crack.● High compressibility and high recovery.● Smallest thickness tolerance.● Different color to choose.

● Gasoline and diesel engines● Furnaces and boilers● Shipbuilding flanges● Chemical plants● Electrical generating stations● Piping flanges● Valves● Refining equipment and steam trap work● Water supply, drainage and waste water treatment


Chrysotile asbestos

Thickness (mm) 0.4–6.0

Plate sizes (mm)

1000 × 1500, 1270 × 1270, 1270 × 1300, 1270 × 3810, 1300 × 1300, 1350 × 1350, 1350 × 1500, 1360 × 1500, 1500 × 1500,

1500 × 2000, 1500 × 3000, 1500 × 4000, 1500 × 4100, 1500 × 4500, 2000 × 3000

Maximum Continuous Working Temperature 200 °C

Steam Max. Continuous Working Temperature 120 °C

Maximum operating pressure 70 bar

Maximum pressure (MPa) 1.5

Tensile strength (MPa) ≥ 6

Compressibility 12 ± 5%

Density (g/cm³) 1.6–2.0

Color red, green, blue, yellow, black, gray and more

Amphibole asbestos

Asbestos gasket steam trap work

Asbestos gasket shipbuilding flange



09Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Rubber GasketAn Excellent Mechanical Seal Gasket

Rubber gasket creates a seal between two parts. It prevents dirt, gas, dust or fluid from leaking out of or into its joining.Rubber gasket is a mechanical seal. It has excellent compressibility, resilience, expansibility, anti-permeability and easy assembly and disassembly. So rubber gasket is widely used in aerospace, petrochemical and architecture industries.In addition, rubber gasket are available in five common materials including EPDM, NBR, neoprene, viton and silicone.

Common specifications● Durometer Rating (hardness): 40, 60, 70● Temperature Range: -40 °F to 212 °F● Elongation: 350%● Tensile Strength: 1100 psi● Widths: 36", 48"● Gauge (thickness): 1/16", 1/8", 3/16", 1/4"

EDPM GasketWith Heat and Ozone Resistance

EPDM (Ethylene Propylene Diene Monomer) is an extremely durable synthetic rubber elastomer. EPDM offers excellent resistance to UV, heat, ozone, chemicals, animal and vegetable oils and harsh weather. Stable in low and high temperatures, this material has a service range of -40 °F to 212 °F and is intermittent to 275 °F.Because of its excellent performance, EPDM gasket is typically used for automotive seals and marine seals.neoprene, viton and silicone.

● Durometer Rating (hardness): 60● Temperature Range: -30 °F to 200 °F● Elongation: 350%● Tensile Strength: 1000 psi● Finish: Plate● Widths: 36", 48"● Gauge (thickness): 1/32", 1/16", 3/32", 1/8", 3/16", 3/8", 1/4", 1/2"

NBR GasketSuitable for Environments Affected by Oil and Fuel

NBR (Nitrile-Butadiene Rubber), also known as Buna-N, is a copolymer of butadiene and acrylonitrile. This synthetic rubber material is resistant to various solvents, hydraulic fluids, animal and vegetable oils and aromatic fuels. In addition, The acrylonitrile content of nitrile sealing compounds varies considerably (18% to 50%) and influences the physical properties of the finished material. The higher the acrylonitrile content, the better the resistance to oil and fuel. Together with good elongation properties, as well as adequate resilience, tensile and compression set, these advantages make NBR gasket ideal for applications where resistance to oils, solvents and fuels.




10

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Neoprene Gasket Moderately Resistant to Petroleum Products

Common specifications● Durometer Rating (hardness): 40, 50, 60, 70, 80● Temperature Range: -20 °F to 180 °F● Elongation: 350% – 400%● Tensile Strength: 900 psi – 1000 psi● Finish: Plate● Widths: 36", 48", 72"● Gauge (thickness): 3/32", 1/16", 1/8", 3/16", 1/4", 1/2", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 1/2", 2"

● Durometer Rating (hardness): 75 (Shore A)● Temperature Range: -18 °F to 400 °F● Elongation: 200%● Tensile Strength: 1000 psi● Finish: Plate, Fabric, Smooth Paper● Width: 36"● Gauge (thickness): 1/32", 1/16", 3/32", 1/8", 3/16", 1/4"

Viton GasketWith Heat Resistance and Oil Resistance

Viton, also known as fluororubber, is a fluorocarbon-based synthetic rubber that provide outstanding resistance to heat and oil as well as resistance to a wide range of concentrated acids bases. Additionally, it also has good tensile strength, resilience and low compression set.This material can perform optimally in the most extreme conditions. Viton has a maximum operating temperature from 400 °F (continuous) to 500 °F (intermittent).


Neoprene is a synthetic rubber made of polymerized chloroprene. It is generally black in color with smooth finish.Neoprene is a flame-retardant material that can also resist the effects of oils, chemicals, oxygen and ozone. In addition, it offers moderate resistance to petroleum products. Because of its excellent properties, neoprene gasket is widely used in industrial and harsh environments.



11Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Silicone Gasket Non-Toxic, Tasteless and Odorless


● Durometer Rating (hardness): 30, 40, 50, 60, 70, 80● Temperature Range: -94 °F to 392 °F● High Temperature: up to 500 °F● Elongation: 300%● Tensile Strength: 1100 psi● Finish: Plate● Widths: 36", 48"● Gauge (thickness): 1/32", 1/16", 3/32", 1/8", 3/16", 1/4"

Silicone is composed of polymerized siloxanes and it is an extremely soft and adaptable material.Silicone gasket boasts superior elastomeric properties at both high and low temperatures and is resistant to the effects of ozone, oxygen, aging, UV and extreme weather conditions. At the same time, Silicone gaskets provide extremely good electrical insulation properties. What’s more, it is non-toxic, tasteless, odorless and chemically-inert which means they are a suitable choice for sanitary applications.

● Petrochemical. Gaskets for process equipment that are resistant to corrosive fluids and temperature fluctuations.

● Aerospace. High-performance gaskets, such as ESD protection and EMI shielding.

● Architecture. Such as ducts, door and window seals, wall cladding, expansion joints and curtain walls.

● HVAC. Ducting and expansion joint gaskets for heating and ventilation systems.

● Power & Utility. Gaskets for use in electrical equipment, compressorsand cable couplings.

Applications

Rubber gasket for duct system

Rubber gasket for duct

Rubber gasket for power

Rubber gaskets for aerospace



12

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Reinforced Graphite GasketWith Metal Mesh, Foil or Tanged Metal

Features● Corrosion proof.● High purity and density.● Long using life.● High temperature resistance.● Excellent compressibility and recovery.● No softening point.

Reinforced graphite gasket is an improved semi-metal gasket reinforced by a metallic mesh, foil or tanged metal. It is laminated from compressed layers of purified natural graphite flake and mechanically bonded with the stainless steel tangs to ensures the material retains dimensional stability in high temperatures.Reinforced graphite gasket has many excellent sealing properties, such as heat stability, self-lubrication, corrosion resistance and without being brittle and aging. In addition, under extreme conditions, reinforced graphite gasket can be used stably for long time without maintenance. So it is suitable for pipe, valve, pump, pressure container, heat exchanger and condensate.Reinforced graphite gasket can be made into special shapes.

Reinforced material: ● Low carbon tanged metal. ● Stainless steel tanged metal. ● Stainless steel flat sheet. ● Stainless steel mesh sheet.


ApplicationsReinforced graphite gasket is suitable for pipe, valve, pump, pressure container, heat exchanger, condensate punched flange, cylinders of diesel engines and water meter.

Reinforced graphite gaskets for valve

Reinforced graphite gaskets for flange

Low carbon tanged metal reinforced layer

Stainless steel tanged metal reinforced layer

Stainless steel flat sheet reinforced layer

Stainless steel mesh sheet reinforced layer

Reinforced Materials

Pressure (N/mm2)

Compressibility(%)

Recovery (%)

Gas Permeability (cm3/min)

(T=1.5 mm)

Sealing Quality(T=1.5 mm) Sealing Constant

N2m (1/hr)

Bumming Oil AM (l/hr) "M" "Y"

Tanged Carbon Steel

Gasket

≥ 4.8

30–35 15–20 ≤ 0.8 30

< 0.5

3.0 9000

SS304/SS316 Tanged Gasket 30–35 15–30 ≤ 0.8 60 2.5 4000

SS304/SS316 Flat Gasket 30–40 10–15 ≤ 0.4 35 2.0 900

SS304/SS316 Mesh Sheet 40–50 15–20 ≤ 0.1 70 3.0 5000



13Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Spiral Wound Gasket Offers High Compressibility and Recovery

Features

● Durable, easy installation and removal.● Inner ring can help shield sealing elements from erosion caused by abrasive media.● It can adjust to temperature changes, shock, and vibration, and can be used at fairly high temperatures and pressures.● Available in wide ranges of materials for various services.● Chemical resistance.● Extra-long shelf life

Spiral Wound Gasket is composed of a steel outer ring, a spiral wound sealing strip filler and a special steel inner ring. It is created by winding alternating strips of metal and filler material.Outer guide ring is fitted to centralise the gasket between the bolts and to act as a compression limiter. Inner ring is fitted to reduce the gap between the inside diameter of the gasket and the bore of the flange.It is widely used in moderate to critical services in various industries. They are most suitable for the gaskets subject to extreme temperature or pressure cycling, shock or vibration. These gaskets have the best resistance property when compare with other metal and asbestos type gaskets.

● Thickness: 0.125", 0.175", 0.25", 0.285"● Lower temperature Rating: -450 °F● Upper temperature Rating: 850 °F● Maximum pressure: 150 psi● PH: 0–14● Class: 150–2500




Applications

● Chemical Industry.● Steam systems.● Onshore and offshore exploration.● Pipeline systems.● Pressure vessels.● Power generation.● Aerospace.● Oil & gas industry.● Heat exchangers.● Compressors.● Condensers.● Pumps and valves.

Pipe size (inch)

150, 300, 400, 600 900, 1500, 2500ID (inch) OD (inch) ID (inch) OD (inch)

1/4 1/2 7/8 – –1/2 3/4 1-1/4 3/4 1-1/43/4 1 1-9/16 1 1-9/161 1-1/4 1-7/8 1-1/4 1-7/8

1-1/4 1-7/8 2-3/8 1-9/16 2-3/81-1/2 2-1/8 2-3/4 1-7/8 2-3/4

2 2-3/4 3-3/8 2-5/16 3-3/82-1/2 3-1/4 3-7/8 2-3/4 3-7/8

3 4 4-3/4 3-3/4 4-3/43-1/2 4-1/2 5-1/4 4-1/8 5-1/4

4 5 5-7/8 4-3/4 5-7/84-1/2 5-1/2 6-1/2 5-5/16 6-1/2

5 6-1/8 7 5-13/16 76 7-3/16 8-1/4 6-7/8 8-1/48 9-3/16 10-3/8 8-3/4 10-1/8

10 11-5/16 12-1/2 10-7/8 12-1/412 13-3/8 14-3/4 12-3/4 14-1/214 14-5/8 16 14 15-3/416 16-5/8 18-1/4 16-1/4 1818 18-11/16 20-3/4 18-1/4 20-1/220 20-11/16 22-3/4 20-1/2 22-1/224 24-3/4 27 24-3/4 26-3/4



14

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Spiral Wound Gasket Offers High Compressibility and Recovery

Types

● Centering gasket (Style CG). Utilizes an external ring which accurately centers gasket on flange face. It provide an additional radial strength to prevent the gasket blow-out and acts as a compression stop. A general purpose gasket suitable for both flat face and raised face flanges.

● Centering gasket with inner ring (Style CGI). This style is similar to style CG, but it additionally consists of an inner ring. The outer ring is used for centering and the internal ring used as an additional compression limiting stop. The internal ring also serves as a barrier to protect the gasket from heat and corrosion.

● Reinforced spiral wound gasket (Style R). It is a basic configuration of spiral wound gasket. The Inner and outer diameters are reinforced with several plies of metal without filler to give greater stability and better compression and sealing characteristics.

● Reinforced inner ring spiral wound gasket (Style RIR). This style of the gasket, the solid inner metal ring acts as a compression stop and fills the annular space between flange bore and the inside diameter of the gasket. It is designed to prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion at flange faces.







15Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Corrugated Metal Gasket Covered With Graphite or PTFE Layer

Features

● Outstanding mechanical strength and thermal conductivity.● Capable of withstanding high temperatures.● Without any limitations on the size.● Stable and reliable sealing function● Trouble-free for handling and installation even for large size.● Chemically resistant.● Does not age or become brittle.

Corrugated metal gasket (CMG) consists of a metal core with concentric grooves on both sides and coated with expanded graphite, PTFE layer or non-asbestos plate.Corrugated metal gasket with soft layer on both sides is used for low pressure applications in large diameter flue gas ducts at high temperature. In addition, corrugated metal gasket is a versatile sealing element when bolt loads are low.Unlike other materials and structures, it can be very resilient.What’s more, corrugated metal gasket directly replaces spiral wound gasket and eliminates inward buckling issues while creating a seal at moderate flange stresses.

● Flanges.● Heat exchangers.● Valve caps.● Gas pipes.

Applications


MetallicMaterials

Code of Germany

Hardness/HB

Temperature (°C)

Density (g/cm3)

Thickness (mm)

Carbon Steel

1.1003/1.038 90 to 120 -60 to 500 7.85 0.5

SS304, SS304L

1.4301/1.4306 30 to 180 -250 to 550 7.93 1.0, 2.0

SS316, SS316L

1.4401/1.4404 30 to 180 -250 to 550 7.98 3.0

Facing Material

Max. Temperature

Pressure at Room Temp.

°C °FMin. Max.

MPa psi MPa psiFlexible Graphite 500 932 17 2500

500 72500Non-Asbestos Sheet 400 752 23 3300PTFE 260 500 17 2500

Available coating types

Corrugated metal gasket coated with graphite

Corrugated metal gasket with PTFE layer

Corrugated metal gasket coated with non-asbestos plate



16

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Corrugated Metal Gasket Covered With Graphite or PTFE Layer

Available types

There are many types of corrugated metal gaskets to meet different circumstance.

Graphite layer Thickness

Gasket Thickness

Gorrugated ring


Gasket Thickness

Gorrugated ringInner eyelet


Gasket Thickness

Gorrugated ring


Gasket Thickness

Gorrugated ringInner eyelet

01

02

03

04



17Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Metal Jacketed GasketGood Resilience Pressures and Corrosion Resistance

Features

● Suitable for narrow flanges● Good blow-out resistance● The metal jacket covering the filler material prevents contamination ● Suitable for high temperatures● Ensures high elasticity and recovery● Nearly any dimension and shape can be mode ● Economical &.perfect sealing stability● Easy to handle and install● Suitable for high temperature● Suitable for narrow flanges


● Jacketed material: carbon steel, copper, soft iron, titanium, Monel, Inconel, aluminum, SS 50, SS 304, SS 304L, SS 316, SS 316L, SS 321, SS 347, SS 410, SS 430, brass, copper,etc..

● Filler material: non-asbestos, asbestos millboard, expanded graphite, ceramic, PTFE, CANF, ePTFE, etc.

● Thickness of gaskets:2 mm to 5 mm (standard thickness 3 mm)

● Temperature: -196 °C to 700 °C (oxidating condition 450 °C).

● Least tighten pressure: 60 MPa.

● Coefficient: m = 3.75.

● Material maximum temperature:

Common Brasses 500 °F Silver 1200 °F

Copper 600 °F Nickel 1400 °F

Aluminum 800 °F SS 430 1400 °F

SS 304 1000 °F Monel 1500 °F

SS 316 1000 °F Stainless Steel, Type 309 SCb 1600 °F

Soft Iron, Low Carbon Steel 1000 °F SS 321 1600 °F

Titanium 1000 °F SS 347 1600 °F

SS 50 1150 °F Inconel 2000 °F

SS 410 1200 °F Hastelloy 2000 °F

Metal Jacketed Gasket consists of a soft filler encapsulated in a metallic material. The filler material provides compressibility and resilience while the jacket confers compressive strength and blow out resistance.Metal jacketed gasket is specially designed and widely used for heat exchangers, autoclaves, columns, pressure vessels, flue stacks, boilers, gas mains, valve bonnets, pumps and similar services.Most of metal jacketed gaskets are supplied in circular form but they can be manufactured to other shapes to suit individual requirements.


● Sealing of heat exchangers.● Pipe flanges.● Boilers and process equipment.● Valve Bonnet Gasket.● Autoclaves.● High pressure oil field drilling and production equipment.● Pressure vessels.● Gas and chemical plants.





18

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Metal Jacketed Gasket Good Resilience Pressures and Corrosion Resistance

Gasket Outside Diameter (OD) by ClassNominal

Pipe Size (NPS)

Gasket Inside Diameter (ID) 150 300 400 600 900 1500 2500

inch inch mm inch mm inch mm inch mm Inch mm inch mm inch mm inch mm1/2 0.88 22.4 1.75 44.5 2 50.8 – – 2 50.8 – – 2.38 60.5 2.63 66.83/4 1.13 28.7 2.13 54.1 2.5 63.5 – – 2.5 63.5 – – 2.63 66.8 2.88 73.21 1.5 38.1 2.5 63.5 2.75 69.9 – – 2.75 69.9 – – 3 76.2 3.25 82.6

1 1/4 1.88 47.8 2.88 73.2 3.13 79.5 – – 3.13 79.5 – – 3.38 85.9 4 101.61 1/2 2.13 54.1 3.25 82.6 3.63 92.2 – – 3.63 92.2 – – 3.75 95.3 4.5 114.3

2 2.88 73.2 4 101.6 4.25 108 – – 4.25 108 – – 5.5 139.7 5.63 1432 1/2 3.38 85.9 4.75 120.7 5 127 – – 5 127 – – 6.38 162.1 6.5 165.1

3 4.25 108 5.25 133.4 5.75 146.1 – – 5.75 146.1 6.5 165.1 6.75 171.5 7.63 193.84 5.19 131.8 6.75 171.5 7 177.8 6.88 174.8 7.5 190.5 8 203.2 8.13 206.5 9.13 231.95 6 152.4 7.63 193.8 8.38 212.9 8.25 209.6 9.38 238.3 9.63 244.6 9.88 251 10.88 276.46 7.5 190.5 8.63 219.2 9.75 247.7 9.63 244.6 10.38 263.7 11.25 285.8 11 279.4 12.38 314.58 9.38 238.3 10.88 276.4 12 304.8 11.88 301.8 12.5 317.5 14 355.6 13.75 349.3 15.13 384.3

10 11.25 285.8 13.25 336.6 14.13 358.9 14 355.6 15.63 397 17 431.8 17 431.8 18.63 473.212 13.5 342.9 16 406.4 16.5 419.1 16.38 416.1 17.88 454.2 19.5 495.3 20.38 517.7 21.5 546.114 14.75 374.7 17.63 447.8 19 482.6 18.88 479.6 19.25 489 20.38 517.7 22.63 574.8 – –16 16.75 425.5 20.13 511.3 21.13 536.7 21 533.4 22.13 562.1 22.5 571.5 25.13 638.3 – –18 19.25 489 21.5 546.1 23.38 593.9 23.25 590.6 24 609.6 25 635 27.63 701.8 – –20 21 533.4 23.75 603.3 25.63 651 25.38 644.7 26.75 679.5 27.38 695.5 29.63 752.6 – –24 25.25 641.4 28.13 714.5 30.38 771.7 30.13 765.3 31 787.4 32.88 835.2 35.38 898.7 – –

Dimensions for Double Jacketed (DJ) Gaskets per ASME B16.20 to Suit ASME B16.5 Flanges

Outside Diameter (OD) by ClassNominal

Pipe Size (NPS)

Inside Diameter (ID) Class 150 Class 300 Class 400 Class 600 Class 900

inch inch mm inch mm inch mm inch mm Inch mm inch mm26 26.5 673.1 30.38 771.7 32.75 831.9 32.63 828.8 34 863.6 34.63 879.628 28.5 723.9 32.63 828.8 35.25 895.4 35 889 35.88 911.4 37.13 943.130 30.5 774.7 34.63 879.6 37.38 949.5 37.13 943.1 38.13 968.5 39.63 1006.632 32.5 825.5 36.88 936.8 39.5 1003.3 39.38 1000.3 40.13 1019.3 42.13 1070.134 34.5 876.3 38.88 987.6 41.5 1054.1 41.38 1051.1 42.13 1070.1 44.63 1133.636 36.5 927.1 41.13 1044.7 43.88 1114.6 43.88 1114.6 44.38 1127.3 47.13 1197.138 38.5 977.9 43.63 1108.2 41.38 1051.1 42.13 1070.1 43.38 1101.9 47.13 1197.140 40.5 1028.7 45.63 1159 43.75 1111.3 44.25 1124 45.38 1152.7 49.13 1247.942 42.5 1079.5 47.88 1216.2 45.75 1162.1 46.25 1174.8 47.88 1216.2 51.13 1298.744 44.5 1130.3 50.13 1273.3 47.88 1216.2 48.38 1228.9 49.88 1267 53.75 1365.346 46.5 1181.1 52.13 1324.1 50 1270 50.63 1286 52.13 1324.1 56.38 1432.148 48.5 1231.9 54.38 1381.3 52 1320.8 52.88 1343.2 54.63 1387.6 58.38 1482.950 50.5 1282.7 56.38 1432.1 54.13 1374.9 55.13 1400.3 56.88 1444.8 - -52 52.5 1333.5 58.63 1489.2 56.13 1425.7 57.13 1451.1 58.88 1495.6 - -54 54.5 1384.3 60.88 1546.4 58.63 1489.2 59.63 1514.6 61.13 1552.7 - -56 56.5 1435.1 63.13 1603.5 60.63 1540 61.63 1565.4 63.13 1603.5 - -58 58.5 1485.9 65.38 1660.7 62.63 1590.8 63.63 1616.2 65.38 1660.7 - -60 60.5 1536.7 67.38 1711.5 64.63 1641.6 66.13 1679.7 68.13 1730.5 - -

Dimensions for Double Jacketed (DJ) Gaskets per ASME B16.20 to Suit ASME B16.47 Series A Flanges



19Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]


Outside Diameter (OD) by ClassNominal

Pipe Size (NPS)

Inside Diameter (ID) Class 150 Class 300 Class 400 Class 600 Class 900

inch inch mm inch mm inch mm inch mm Inch mm inch mm26 26.5 673.1 28.44 722.4 30.25 768.4 29.25 743 30 762 32.88 835.228 28.5 723.9 30.44 773.2 32.38 822.5 31.38 797.1 32.13 816.1 35.38 898.730 30.5 774.7 32.44 824 34.75 882.7 33.63 854.2 34.5 876.3 37.63 955.832 32.5 825.5 34.56 877.8 36.88 936.8 35.75 908.1 36.63 930.4 39.88 101334 34.5 876.3 36.69 931.9 39 990.6 37.75 958.9 39.13 993.9 42.13 1070.136 36.5 927.1 38.75 984.3 41.13 1044.7 40.13 1019.3 41.13 1044.7 44.13 1120.938 38.5 977.9 41 1041.4 43.13 1095.5 42.13 1070.1 43.38 1101.9 47.13 1197.140 40.5 1028.7 43 1092.2 45.13 1146.3 44.25 1124 45.38 1152.7 49.13 1247.942 42.5 1079.5 45 1143 47.13 1197.1 46.25 1174.8 47.88 1216.2 51.13 1298.744 44.5 1130.3 47 1193.8 49.13 1247.9 48.38 1228.9 49.88 1267 53.75 1365.346 46.5 1181.1 49.31 1252.5 51.75 1314.5 50.63 1286 52.13 1324.1 56.38 1432.148 48.5 1231.9 51.31 1303.3 53.75 1365.3 52.88 1343.2 54.63 1387.6 58.38 1482.950 50.5 1282.7 53.31 1354.1 55.75 1416.1 55.13 1400.3 56.88 1444.8 – –52 52.5 1333.5 55.31 1404.9 57.75 1466.9 57.13 1451.1 58.88 1495.6 – –54 54.5 1384.3 57.5 1460.5 60.13 1527.3 59.63 1514.6 61.13 1552.7 – –56 56.5 1435.1 59.5 1511.3 62.63 1590.8 61.63 1565.4 63.13 1603.5 – –58 58.5 1485.9 62.06 1576.3 65.06 1652.5 63.63 1616.2 65.38 1660.7 – –60 60.5 1536.7 64.06 1627.1 67.06 1703.3 66.13 1679.7 68.13 1730.5 – –

Dimensions for Double Jacketed (DJ) Gaskets per ASME B16.20 to Suit ASME B16.47 Series B Flanges

Types

● Single jacketed gasket. This type of gasket is used in air tool applications and engine applications where space is limited, gasket seating surfaces are narrow and relatively low compressive forces are available for seating the gasket.

● Single jacketed overlap. Construction of this gasket offers more filler protection than the standard single jacketed design. It is especially useful for applications where the radial dimensions do not allow space for a double jacketed gasket.

● Double jacketed gasket. Double-jacketed gaskets are probably the most commonly used style of gaskets in heat exchanger applications. They are also extensively used in standard flanges. Since most double-jacketed gaskets are custom made, there is virtually no limit to size, shape or configuration.

● Double jacketed corrugated gasket. The double jacketed corrugated gasket is an improvement on a plain-jacketed gasket. The corrugations on the gasket will provide an additional labyrinth seal. Enhancing its compressive characteristics. Main sealing performance of double-jacketed corrugated gasket still relies on the inner lap.

● Double jacketed corrugated with corrugated metal filler. Double jacketed corrugated metal gasket with a corrugated metal filler can be beneficial at temperatures in excess of the range of 900 °F (483 °C) to 1000 °F (538 °C) where the standard soft filler is normally not recommended. This construction has the advantages of the double jacketed corrugated metal gasket and, in addition, since the filler material is normally same as the gasket, the upper temperature limit would be determined by the metal being used. This type of gasket, depending upon metal selected, is designed to be a heat exchanger gasket for high pressure and high temperature applications. gaskets are custm made, there is virtually no limit to size, shape or configuration.



20

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]


Types

● Double jacketed corrugated gasket.

The double-jacketed double-shelled gasket is similar to the double jacketed gasket. But it uses two shells in the

fabrication of the gasket instead of using a shell and a liner. It has the advantage of a double lap at both the ID

and the OD of the gasket, adding greater stability to the gasket. The construction will withstand higher

compressive loads. Double-shell gaskets are normally restricted to use in high pressure applications.

Single jacketed gasket section diagram Single jacketed overlap section diagram

Double jacketed gasket section diagram Double jacketed corrugated gasket section diagram

Double jacketed corrugated with corrugated metal filler section diagram

Double jacketed double shell gasket section diagram

20

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]





21Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

PTFE Sealing TapeHelping to Seal The Joint without Hardening

Features

● Suitable for narrow flanges● Good blow-out resistance● The metal jacket covering the filler material prevents contamination ● Suitable for high temperatures● Ensures high elasticity and recovery● Nearly any dimension and shape can be mode ● Economical &.perfect sealing stability● Easy to handle and install● Suitable for high temperature● Suitable for narrow flanges

PTFE Sealing Tape is a Teflon film tape commonly used in plumbing for sealing pipe threads. The tape is sold cut to specific widths and wound on a spool, making it easy to wind around pipe threads.It has an expanded network composed of superfine fibers and joints. The combination of flexibility, high longitudinal strength, and easy deforming ability in the transverse direction makes expanded PTFE unsintered tape very suitable for packing and thread sealing applications.It is widely used by plumbers for General Water Plumbing applications.



● Thickness: 0.025" to 0.035".● Elongation: > 100%.● Tensile strength: 15 N/mm².● Temperature range: -450 °F to +500 °F (-268 °C to +260 °C) PTFE is completely stable up to +500 °F or +260 °C. Decomposition is slow up to 750 °F or 400 °C.● Pressure rating: 10,000 psi or 69,000 kPa.

● Density: 0.4 g/cm³.

● Color: white, yellow, pink, green, gold, gray.

● Hydraulic and high-pressure lines● Shower Heads● Sprinklers● Pipe fittings● Autoclaves.● Gas heaters● Filters



Item Width LengthPST-01 1/4" 520"PST-02 1/2" 100"PST-03 1/2" 260"PST-04 1/2" 520"PST-05 1/2" 610"PST-06 1/2" 1296"PST-07 1/2" 1429"PST-08 3/4" 260"PST-09 3/4" 310"PST-10 3/4" 520"PST-11 3/4" 610"PST-12 3/4" 1296"PST-13 3/4" 1429"PST-14 1" 260"PST-15 1" 310"PST-16 1" 520"PST-17 1" 610"PST-18 1" 1296"PST-19 1" 1429"PST-20 2" 1429"



22

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Types

● White PTFE sealing tape. (Suitable for low pressure, air, water and hydraulic applications. Particularly suited for plastic fittings.)

● Yellow PTFE sealing tape. (It is designed and manufactured for natural gas, propane, butane, water, oil and chemical lines.)

● Pink PTFE sealing tape. (Suitable for water lines, sewage lines and sprinkler systems.)

● Green PTFE sealing tape. (Extra processing makes this degreased tape suitable for Oxygen use.)

● Gold PTFE sealing tape. (Thickest and densest PTFE tape for chemical applications where high quality sealing is imperative.)

● PTFE tape for stainless & aluminum. (An added feature of our stainless steel thread sealing PFTE tape is the well above average thickness and density ensuring effective seals.)

White PTFE sealing tape Yellow PTFE sealing tape Pink PTFE sealing tape

Green PTFE sealing tape Gold PTFE sealing tape PTFE tape for stainless & aluminum

PTFE Sealing Tape Helping to Seal The Joint without Hardening



23Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Anti-Splash TapeUsed in Marine & Offshore


Anti-Splash tape is constructed of an aluminum or glass cloth laminate coated with a high temperature silicone adhesive.Anti-Splash tape is enhanced with a fire retardant (self-extinguishing) adhesive layer. At the same time, it is also water resistant. In addition, the maximum working temperature of tape is up to 150 °C.It is designed to prevent hazardous liquids (oil/fuel) spraying outs or leaking from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations.Anti-Splash tape is widely used to wrap around tubing, hoses, fittings, flanges, and valves in the marine and offshore industry.

Physical properties and performed tests

Applications

● Fuel oil injection pipes, fuel oil service pipes, fuel oil valve cooling oil pipes attached to diesel engines.● Flammable oil pipes, pump and strainer.● Lube oil service pipes and hydraulic oil pipes attached to diesel engines.● Fuel oil heater.

The preceding areas of fire risk should be protected from the following sources of ignition:

● Exhaust gas pipe.● Steam pipe.● Turbo charger.● Electrical equipment.● Boiler, thermal oil heater and incinerator.

Anti-splash tapes for fuel pipes

Anti-splash tapes for motor

IMPA Code Width (mm) Width (inch) Length (m) Roll/Box871801 35 1.38 10 28871802 50 1.97 10 20871808 75 2.95 10 12871804 100 3.94 10 12871803 140 5.51 10 7871804 250 9.84 10 4871805 500 19.68 10 2871806 1000 39.37 10 1

Total thickness 9.5 mils

Colour Silver

Max. temperature Up to 150 °C (300 °F)

Pressure 300 psi

Tensile strength 93.2 lbs. per inch (ASTM-882)

Adhesion Above 1000 grams, 25 mm g/f

Adhesion to steel 5.8 lbs. per inch (ASTM-33330)

Aging properties Indefinite shelf life when properly stored



24

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Installation steps

Anti-Splash Tape Used in Marine & Offshore

Steps for installing anti-splash tape on the flange

Steps for installing anti-splash tape on pipes

Types

24

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Different conditions before and after using anti-splash tapes

Step B1 Step B2 Step B3

Step A1 Step A2

Step A3 Properly installed tape



25Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Graphite PackingBest Choice for High Temperature and High Pressure Applications

Features

● Requires less run-in.● Resists many strong chemicals.● Low coefficient of friction reduces shaft wear.● Good thermal conductivity.● Withstands elevated temperatures and aggressive chemicals.● Ideal end ring (with GRAPH-LOCK center rings) in valve service.● Low chloride certification available.● Graphite filament reinforcement resists extrusion in high pressure applications.● Convenient spool stock reduces inventory and downtime.● Anti-corrosion additive reduces the chance of pitting.● Withstand dramatic pressure and temperatures in valves.

Graphite Packing is made of reinforced graphite. The reinforcing materials are various fibers or wires including steel wire, copper wire, nickel wire, carbon fiber, pre-oxidized wire, glass yarn and other reinforced graphite wire.Graphite packing resists all chemicals across the entire pH range (except fuming sulfuric acid, aqua regia, fuming nitric acid and fluorine). It also has great lubricity and excellent thermal conductivity.It is widely used in acid and oil production industries Its resilience makes it the perfect sealant for the fuel, chemical, and gas industries.



● Material: reinforced graphite.

● Reinforced material: various fibers or wires including steel wire, copper wire, nickel wire, carbon fiber, pre- oxidized wire, glass yarn and other reinforced graphite wire.

● PH range: 0–14 (Except strong oxidizers).

● Pressure limit in pumps: 125 psi (8.5 bar).

● Pressure limit in valves: 2,500 psi (172 bar).

● Temperature range in non-oxidizing atmospheres: -400 to 6,000 °F (-240 to 3,300 °C).

● Temperature range in oxidizing atmospheres: -400 to 850 °F (-240 to 454 °C).

● Temperature range in steam: -400 to 1,200 °F (-240 to 649 °C).

● Rotary speed: 25 m/s.

● Density: 1.25 g/cm³.

Fields:● Power plants● Pulp & paper industry● Refineries & petrochemical plants● Waste water treatment● Sugar plants● Marine services

Equipment:● Valves stems● Steam service● Rotary applications● Pumps● Agitators● Mixers● Crystallizers● Filters● Continuous digesters● Reciprocating pump rods● Slip-type expansion joints● Reactors● Autoclaves● Hydroelectric turbines

In pump

In valves

In mixer



26

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

PTFE PackingWith Chemical Resistance and Low Friction Coefficient

Features

● Long lasting performance.● Good flexibility and compressibility.● Tough interlock braid.● Superior chemical resistance. Resistant to the impact of water, steam, oil, fuel, solvent, acid and alkali.● Low friction.

PTFE packing or teflon packing is a braided packing made of high purity PTFE (poly tetra fluoroethylene) yarn without soaking any PTFE dispersion and lubrication. PTFE packing is a kind of self-lubricating, chemical inert, non-toxic and non-hazardous material.In addition, PTFE is called "king of plastic" and causes no pollution to the medium or liquid. More importantly, PTFE is known for its outstanding resistance to chemical attack, low friction coefficient, low water absorption and wide temperature tolerance (including cryogenic applications).Due to the above advantages, PTFE packing is widely used in chemical processing, food processing and pharmacy.



PTFE packing is ideal for general valve and pump (including rotating, centrifugal and reciprocating pump) applications in chemical processing, food processing, cryogenic applications, industrial gas processing and hospital.

PTFE packing for valve

Maximum Temperature 280 °C

Pressure

Rotating 1.5 MPa

Reciprocating 10 MPa

Valve 15 MPa

Velocity 5 m/s

pH 0 to 14

Density 1.4–1.6 g/cm3

Size Code (inch) 1/8 1/5 1/4 1/3 3/8 4/9

Cross Section (mm) 3 5 6.5 8 9.5 11

Size Code (inch) 1/2 5/9 5/8 3/4 7/8 1

Cross Section (mm) 12.5 14 16 19 22 25



27Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Oil Seal Optimal Fluid Sealing Performance

Features

● Provides good low temperature resistant capability● Low swelling in hydrocarbon fluids● High sealing performance by optimum● Lightweight, compact and energy-saving● Compatibility with the fluid contacted● High degree of elasticity● Wear resistance● Low friction coefficient● Exact fit● Durable● Best in quality

Oil Seal normally consists of three basic components: the rubber sealing element, the metal insert (case) and the garter spring. The purpose of the sealing element is to stop the fluid from leaking between the shaft and housing. The metal insert will give rigidity and strength to the seal while it is being held in the bore or recessed groove. The garter spring will help make the rubber sealing element more effective.In precision bearings, oil seal helps prevent lubricants from escaping the bearings or a specific area. In machine components, oil seal helps prevent abrasives, corrosive moisture and other harmful contaminants from entering machinery. It also helps stop mixture of two different mediums, such as lubricating oil and water.

Specifications

Applications

In automotive equipment

● Automotive equipment● Manufacturing● Off-highway● Oil refineries● Power transmission● Gearboxes● Hydraulic cylinders.● High voltage equipment● Construction● Medical and aerospace● Chemical processing● Pulp and paper● Oil and refining● Food and beverage● Water and waste water

In hydraulic cylinder

In power transmission

ASTM/DIN ISO

Wear Resistance

High Temperature

Oil Resistance

Low Temperature

Oil Resistance

NBR very good 100 °C 40 °C good

ACM moderate 150 °C -30 °C good

VMQ (Silicone) moderate 180 °C -50 °C moderate

FKM very good

200 °C (max.

150 °C operate

temperature)

-25 °C very good

HNBR (NEM) moderate

150 °C (max.

140 °C operate

temperature)

-40 °C good

PTFE good 200 °C -80 °C extremely good



28

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

Common Specifications of Oil Seal

Item Shaft Diameter

Shaft Diameter Width

OS-01 6 mm 16 mm 5 mmOS-02 6 mm 16 mm 7 mmOS-03 6 mm 22 mm 7 mmOS-04 7 mm 16 mm 7 mmOS-05 7 mm 22 mm 7 mmOS-06 8 mm 16 mm 7 mmOS-07 8 mm 18 mm 5 mmOS-08 8 mm 18 mm 7 mmOS-09 8 mm 22 mm 7 mmOS-10 8 mm 24 mm 7 mmOS-11 9 mm 18 mm 7 mmOS-12 9 mm 22 mm 7 mmOS-13 9 mm 26 mm 7 mmOS-14 10 mm 19 mm 7 mmOS-15 10 mm 22 mm 7 mmOS-16 10 mm 24 mm 7 mmOS-17 10 mm 25 mm 7 mmOS-18 10 mm 26 mm 7 mmOS-19 11 mm 22 mm 7 mmOS-20 11 mm 26 mm 7 mmOS-21 11 mm 30 mm 7 mmOS-22 12 mm 19 mm 5 mmOS-23 12 mm 20.0 mm 5 mmOS-24 12 mm 22 mm 7 mmOS-25 12 mm 24 mm 7 mm

OS-26 12 mm 25 mm 4.5 mm

OS-27 12 mm 26 mm 7 mmOS-28 12 mm 27 mm 7 mmOS-29 12 mm 28 mm 7 mmOS-30 12 mm 30 mm 7 mmOS-31 12 mm 32 mm 7 mmOS-32 12 mm 35 mm 7 mmOS-33 13 mm 26 mm 7 mmOS-34 13 mm 27 mm 7 mmOS-35 13 mm 28 mm 7 mmOS-36 13 mm 30 mm 7 mmOS-37 14 mm 25 mm 5 mmOS-38 14 mm 26 mm 7 mmOS-39 14 mm 27 mm 7 mmOS-40 14 mm 32 mm 7 mmOS-41 14 mm 35 mm 7 mmOS-42 15 mm 24 mm 7 mmOS-43 15 mm 26 mm 7 mmOS-44 15 mm 28 mm 7 mmOS-45 15 mm 30 mm 7 mmOS-46 15 mm 32 mm 7 mm

Item Shaft Diameter


OS-47 15 mm 35 mm 7 mmOS-48 15 mm 37 mm 6 mmOS-49 15 mm 40 mm 7 mmOS-50 16 mm 22 mm 4 mmOS-51 16 mm 24 mm 6 mmOS-52 16 mm 24 mm 7 mmOS-53 16 mm 26 mm 7 mmOS-54 16 mm 28 mm 7 mmOS-55 16 mm 30 mm 7 mmOS-56 16 mm 32 mm 7 mmOS-57 16 mm 35 mm 7 mmOS-58 16 mm 40 mm 7 mmOS-59 17 mm 27 mm 7 mmOS-60 17 mm 29 mm 7 mmOS-61 17 mm 30 mm 7 mmOS-62 17 mm 32 mm 7 mmOS-63 17 mm 35 mm 7 mmOS-64 17 mm 37 mm 7 mmOS-65 17 mm 38 mm 7 mmOS-66 17 mm 40 mm 7 mmOS-67 17 mm 42 mm 7 mmOS-68 17 mm 47 mm 7 mmOS-69 17 mm 47 mm 8 mmOS-70 18 mm 28 mm 6 mmOS-71 18 mm 30 mm 7 mmOS-72 18 mm 32 mm 7 mmOS-73 18 mm 32 mm 8 mmOS-74 18 mm 35 mm 7 mmOS-75 18 mm 36 mm 7 mmOS-76 18 mm 38 mm 7 mmOS-77 18 mm 40 mm 7 mmOS-78 19 mm 27 mm 6 mmOS-79 19 mm 30 mm 7 mmOS-80 19 mm 32 mm 8 mmOS-81 19 mm 37 mm 7 mmOS-82 19 mm 38 mm 7 mm

OS-83 19 mm 40 mm 10 mm

OS-84 19 mm 47 mm 7 mmOS-85 20 mm 30 mm 5 mmOS-86 20 mm 30 mm 7 mmOS-87 20 mm 31 mm 7 mmOS-88 20 mm 32 mm 7 mmOS-89 20 mm 35 mm 7 mmOS-90 20 mm 36 mm 7 mmOS-91 20 mm 37 mm 7 mmOS-92 20 mm 37 mm 8 mm

Item Shaft Diameter


OS-93 20 mm 40 mm 7 mmOS-94 20 mm 40 mm 7 mmOS-95 20 mm 42 mm 7 mmOS-96 20 mm 42 mm 10 mmOS-97 20 mm 46 mm 7 mmOS-98 20 mm 47 mm 7 mmOS-99 20 mm 48 mm 7 mm

OS-100 20 mm 50 mm 7 mmOS-101 20 mm 52 mm 7 mmOS-102 21 mm 35 mm 7 mmOS-103 22 mm 32 mm 7 mmOS-104 22 mm 35 mm 7 mmOS-105 22 mm 36 mm 7 mmOS-106 22 mm 40 mm 8 mmOS-107 22 mm 42 mm 7 mmOS-108 22 mm 45 mm 7 mmOS-109 22 mm 47 mm 7 mmOS-110 24 mm 35 mm 7 mmOS-111 24 mm 38 mm 7 mmOS-112 24 mm 40 mm 7 mmOS-113 24 mm 42 mm 7 mmOS-114 24 mm 42 mm 8 mmOS-115 24 mm 52 mm 7 mmOS-116 25 mm 35 mm 6 mmOS-117 25 mm 35 mm 7 mmOS-118 25 mm 36 mm 7 mmOS-119 25 mm 37 mm 7 mmOS-120 25 mm 38 mm 7 mmOS-121 25 mm 40 mm 7 mmOS-122 25 mm 40 mm 7 mm




29Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Types


SC TCSASB

TB VBVCTA

VA KAKBKC

SF KFVFTF

SM SCVMTM



30

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]

V Seal All-Rubber Structure Used on the Shafts

Features

● Low demands for surface quality.● Simple installation.● Good dynamic sealing effect.● Low wears.● Long service life.● Flexible Lip. It provides positive sealing even under shaft misalignment and run-out.

V seal is a solid all-rubber seal. The function of V seal is to exclude dust, dirt, water, oil splash or other aggressive contaminants from entering into the bearing housing while retaining grease.V seal is used on shafts. It works by stretching over the shaft to create a tight seal along the shaft while the flexible lip seals lightly against the counterface at a right angle to the shaft.In addition, V seal acts as flinger, since it rotates with the shaft and causes the lip to rotate against the housing or bearing. And as the speed increases, friction decreases due to centripetal force.What’ more, V seal can be utilized as either a primary or backup seal and perform an excellent sealing job.

Available types

Applications

V seal for electric motor

V seal has four available types, namely VA, VS, VE and VL.

D

EA

F

G

BC

BC

D

EA

F

G

EA

F

G

BC

D

EA

F

G

C

D

B

VA sealDue to perpendicular rear face, intermediate cross-section and wide ranges of diameters, VA seal is the most popular V seal design.

VS sealWidely body tapered cross section provides higher radial force for high speed shafts.

VE sealA heavy-duty large diameter seal is used in paper mills and rolling mills as dirt and water excluder.

VL sealNarrow cross section for application with space constraints.

● Electric motors.● Pumps.● Gear boxes.● Agricultural equipment & machinery.● Mining equipment & machinery.● Bearing pedestals.

D

EA

F

G

BC

BC

D

EA

F

G

EA

F

G

BC

D

EA

F

G

C

D

B

D

EA

F

G

BC

BC

D

EA

F

G

EA

F

G

BC

D

EA

F

G

C

D

B

D

EA

F

G

BC

BC

D

EA

F

G

EA

F

G

BC

D

EA

F

G

C

D

B



31Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]


Common Specification of VA Seal

ItemShaft Diameter Seal Dimensions Housing Dimensions

A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm)I.D. O.D. Height I.D. O.D. Width

VA 003 2.7 – 3.5 2.5 5.5 3.0 A + 1.0 A + 4.0 2.50 ± 0.3

VA 004 3.5 – 4.5 3.2 7.20 3.7 A + 1.0 A + 6.0 3.0 ± 0.4

VA 005 4.5 – 5.5 4.0 8.0 3.7 A + 1.0 A + 6.0 3.0 ± 0.4

VA 006 5.5 – 6.5 5.0 9.0 3.7 A + 1.0 A + 6.0 3.0 ± 0.4

VA 007 6.5 – 8. 6.0 10.0 3.7 A + 1.0 A + 6.0 3.0 ± 0.4

VA 008 8.0 – 9.5 7.0 11.0 3.7 A + 1.0 A + 6.0 3.0 ± 0.4

VA 010 9.5 – 11.5 9.0 15.0 5.5 A + 2.0 A + 9.0 4.50 ± 0.6

VA 012 11.5 – 12.5 10.5 16.5 5.5 A + 2.0 A + 9.0 4.50 ± 0.6

VA 013 12.5 – 13.5 11.7 17.5 5.5 A + 2.0 A + 9.0 4.50 ± 0.6

VA 014 13.5– 15.5 12.5 18.5 5.5 A + 2.0 A + 9.0 4.50 ± 0.6

VA 016 15.5 – 17.5 14.0 20.0 5.5 A + 2.0 A + 9.0 4.50 ± 0.6

VA 018 17.5 – 19. 16.0 22.0 5.5 A + 2.0 A + 9.0 4.50 ± 0.6

VA 020 19.0 – 21.0 18.0 26.0 7.5 A + 2.0 A + 12.0 6.0 ± 0.8

VA 022 21.0 – 24.0 20.0 28.0 7.5 A + 2.0 A + 12.0 6.0 ± 0.8

VA 025 24.0 – 27.0 22.0 30.0 7.5 A + 2.0 A + 12.0 6.0 ± 0.8

VA 028 27.0 – 29.0 25.0 33.0 7.5 A + 3.0 A + 12.0 6.0 ± 0.8

VA 030 29.0 – 31.0 27.0 35.0 7.5 A + 3.0 A + 12.0 6.0 ± 0.8

VA 032 31.0 – 33.0 29.0 37.0 7.5 A + 3.0 A + 12.0 6.0 ± 0..8

VA 035 33.0 – 36.0 31.0 39.0 7.5 A + 3.0 A + 12.0 6.0 ± 0..8

VA 038 36.0 – 38.0 34.0 42.0 7.5 A + 3.0 A + 12.0 6.0 ± 0..8

VA 040 38.0 – 43.0 36.0 46.0 9.0 A + 3.0 A + 15.0 7.0 ± 1.0

VA 045 43.0 – 48.0 40.0 50.0 9.0 A + 3.0 A + 15.0 7.0 ± 1.0

VA 050 48.0 – 53.0 45.0 55.0 9.0 A + 3.0 A + 15.0 7.0 ± 1.0

VA 055 53.0 – 58.0 49.0 59.0 9.0 A + 3.0 A + 15.0 7.0 ± 1.0

VA SealD

E A F

G

B C

B C

D

E A F

G

E A F

G

B C

D

E A F

G

C

D

B



32

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]





VA 060 58.0 – 63.0 54.0 64.0 9.0 A + 3.0 A + 15.0 7.0 ± 1.0

VA 065 63.0 – 68.0 58.0 68.0 9.0 A + 3.0 A + 15.0 7.0 ± 1.0

VA 070 68.0 – 73.0 63.0 75.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA 075 73.0 – 78.0 67.0 79.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA 080 78.0 – 83.0 72.0 84.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-085 83.0 – 88.0 76.0 88.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-090 88.0 – 93.0 81.0 93.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-095 93.0 – 98.0 85.0 97.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-085 83.0 – 88.0 76.0 88.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-090 88.0 – 93.0 81.0 93.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-095 93.0 – 98.0 85.0 97.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-100 98.0 – 105.0 90.0 102.0 11.0 A + 4.0 A + 18.0 9.0 ± 1.2

VA-110 105.0 – 115.0 99.0 113.0 12.8 A + 4.0 A + 21.0 10.50 ± 1.5

VA-120 115.0 – 125.0 108.0 122.0 12.8 A + 4.0 A + 21.0 10.50 ± 1.5

VA-130 125.0 – 135.0 117.0 131.0 12.80 A + 4.0 A + 21.0 10.50 ± 1.50

VA-140 135.0 – 145.0 126.0 140.0 12.80 A + 4.0 A + 21.0 10.50 ± 1.50

VA-150 145.0 – 155.0 135.0 149.0 12.80 A + 4.0 A + 21.0 10.50 ± 1.50

VA-160 155.0 – 165.0 144.0 160.0 14.50 A + 5.0 A + 24.0 12.0 ± 1.80

VA-170 165.0 – 175.0 153.0 169.0 14.50 A + 5.0 A + 24.0 12.0 ± 1.80

VA-180 175.0 – 185.0 162.0 178.0 14.50 A + 5.0 A + 24.0 12.0 ± 1.80

VA-190 185.0 – 195.0 171.0 187.0 14.50 A + 5.0 A + 24.0 12.0 ± 1.80

VA-199 195.0 – 210.0 180.0 196.0 14.50 A + 5.0 A + 24.0 12.0 ± 1.80

VA-200 190.0 – 210.0 180.0 210.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-220 210.0 – 235.0 198.0 228.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-250 235.0 – 265.0 225.0 255.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-275 265.0 – 290.0 247.0 277.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-300 290.0 – 310.0 270.0 300.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-325 310.0 – 335.0 292.0 322.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-350 335.0 – 365.0 315.0 345.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-375 365.0 – 390.0 337.0 367.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-400 390.0 – 430.0 360.0 390.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-450 430.0 – 480.0 405.0 435.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-500 480.0 – 530.0 450.0 480.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-550 530.0 – 580.0 495.0 525.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-600 580.0 – 630.0 540.0 570.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-650 630.0 – 665.0 600.0 630.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-700 665.0 – 705.0 630.0 660.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0



33Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]




VA-725 705.0 – 745.0 670.0 700.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-750 745.0 – 785.0 705.0 735.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-800 785.0 – 830.0 745.0 775.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-850 830.0 – 875.0 785.0 815.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-900 875.0 – 920.0 825.0 855.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-950 920.0 – 965.0 865.0 895.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1000 965.0 – 1015.0 910.0 940.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1100 1065.0 – 1115.0 1000.0 1030.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1150 1115.0 – 1165.0 1045.0 1075.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1200 1165.0 – 1215.0 1090.0 1120.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1250 1215.0 – 1270.0 1135.0 1165.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1300 1270.0 – 1320.0 1180.0 1210.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1350 1320.0 – 1370.0 1225.0 1255.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1400 1370.0 – 1420.0 1270.0 1300.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1450 1420.0 – 1470.0 1315.0 1345.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1500 1470.0 – 1520.0 1360.0 1390.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1550 1520.0 – 1570.0 1405.0 1435.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1600 1570.0 – 1620.0 1450.0 1480.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1650 1620.0 – 1670.0 1495.0 1525.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1700 1670.0 – 1720.0 1540.0 1570.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1750 1720.0 – 1770.0 1585.0 1615.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1800 1770.0 – 1820.0 1630.0 1660.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1850 1820.0 – 1870.0 1675.0 1705.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1900 1870.0 – 1920.0 1720.0 1750.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-1950 1920.0 – 1970.0 1765.0 1795.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0

VA-2000 1970.0 – 2020.0 1810.0 1840.0 25.0 A + 10.0 A + 45.0 20.0 ± 4.0




34

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]



VS-005 4.5 – 5.5 4.0 8.0 5.2 A + 1.0 A + 6.0 4.50 ± 0.4VS-006 5.50– 6.5 5.0 9.0 5.2 A + 1.0 A + 6.0 4.50 ± 0.4VS-007 6.5 – 8.0 6.0 10.0 5.2 A + 1.0 A + 6.0 4.50 ± 0.4VS-008 8.0 – 9.5 7.0 11.0 5.2 A + 1.0 A + 6.0 4.50 ± 0.4VS-010 9.5 – 11.5 9.0 15.0 7.7 A + 2.0 A + 9.0 6.70 ± 0.6VS-012 11.5 – 13.5 10.50 16.5 7.7 A + 2.0 A + 9.0 6.70 ± 0.6VS-014 13.5 – 15.5 12.50 18.5 7.7 A + 2.0 A + 9.0 6.70 ± 0.6VS-016 15.5 – 17.5 14.0 20.0 7.7 A + 2.0 A + 9.0 6.70 ± 0.6VS-018 17.5 – 19.0 16.0 22.0 7.7 A + 2.0 A + 9.0 6.70 ± 0.6VS-020 19.0 – 21.0 18.0 26.0 10.5 A + 2.0 A + 12.0 9.0 ± 0.8VS-022 21.0 – 24.0 20.0 28.0 10.5 A + 2.0 A + 12.0 9.0 ± 0.8VS-025 24.0 – 27.0 22.0 30.0 10.5 A + 2.0 A + 12.0 9.0 ± 0.8VS-028 27.0 – 29.0 25.0 33.0 10.5 A + 3.0 A + 12.0 9.0 ± 0.8VS-030 29.0 – 31.0 27.0 35.0 10.5 A + 3.0 A + 12.0 9.0 ± 0.8VS-032 31.0 – 33.0 29.0 37.0 10.5 A + 3.0 A + 12.0 9.0 ± 0.8VS-035 33.0 – 36.0 31.0 39.0 10.5 A + 3.0 A + 12.0 9.0 ± 0.8VS-038 36.0 – 38.0 34.0 42.0 10.5 A + 3.0 A + 12.0 9.0 ± 0.8VS-040 38.0 – 43.0 36.0 46.0 13.0 A + 3.0 A + 15.0 11.0 ± 1.0VS-045 43.0 – 48.0 40.0 50.0 13.0 A + 3.0 A + 15.0 11.0 ± 1.0VS-050 48.0 – 53.0 45.0 55.0 13.0 A + 3.0 A + 15.0 11.0 ± 1.0VS-055 53.0 – 58.0 49.0 59.0 13.0 A + 3.0 A + 15.0 11.0 ± 1.0VS-060 58.0 – 63.0 54.0 64.0 13.0 A + 3.0 A + 15.0 11.0 ± 1.0VS-065 63.0 – 68.0 58.0 68.0 13.0 A + 3.0 A + 15.0 11.0 ± 1.0VS-070 68.0 – 73.0 63.0 75.0 15.5 A + 4.0 A + 18.0 13.50 ± 1.2VS-075 73.0 – 78.0 67.0 79.0 15.5 A + 4.0 A + 18.0 13.50 ± 1.2VS-080 78.0 – 83.0 72.0 84.0 15.5 A + 4.0 A + 18.0 13.50 ± 1.2VS-085 83.0 – 88.0 76.0 88.0 15.5 A + 4.0 A + 18.0 13.50 ± 1.2VS-090 88.0 – 93.0 81.0 93.0 15.5 A + 4.0 A + 18.0 13.50 ± 1.2VS-095 93.0 – 98.0 85.0 97.0 15.5 A + 4.0 A + 18.0 13.50 ± 1.2VS-100 98.0 – 105.0 90.0 102.0 15.5 A + 4.0 A + 18.0 13.50 ± 1.2VS-110 105.0 – 115.0 99.0 113.0 18.0 A + 4.0 A + 21.0 15.50 ± 1.5VS-120 115.0 – 125.0 108.0 122.0 18.0 A + 4.0 A + 21.0 15.50 ± 1.5VS-130 125.0 – 135.0 117.0 131.0 18.0 A + 4.0 A + 21.0 15.50 ± 1.5VS-140 135.0 – 145.0 126.0 140.0 18.0 A + 4.0 A + 21.0 15.50 ± 1.5VS-150 145.0 – 155.0 135.0 149.0 18.0 A + 4.0 A + 21.0 15.50 ± 1.5VS-160 155.0 – 165.0 144.0 160.0 20.5 A + 5.0 A + 24.0 18.0 ± 1.8VS-170 165.0 – 175.0 153.0 169.0 20.5 A + 5.0 A + 24.0 18.0 ± 1.8VS-180 175.0 – 185.0 162.0 178.0 20.5 A + 5.0 A + 24.0 18.0 ± 1.8VS-190 185.0 – 195.0 171.0 187.0 20.5 A + 5.0 A + 24.0 18.0 ± 1.VS-199 195.0 – 210.0 180.0 196.0 20.5 A + 5.0 A + 24.0 18.0 ± 1.80

Common Specification of VS Seal


VS Seal

D

E A F

G

B C

B C

D

E A F

G

E A F

G

B C

D

E A F

G

C

D

B



35Yu

anBo

Eng

inee

ring

Co.

, Ltd

.

[email protected]

Common Specification of VL Seal



VL-130 125.0 – 135.0 117.0 130.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-140 135.0 – 145.0 126.0 139.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-150 145.0 – 155.0 135.0 148.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-160 155.0 – 165.0 144.0 157.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-170 165.0 – 175.0 153.0 166.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-180 175.0 – 185.0 162.0 175.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-190 185.0 – 195.0 171.0 184.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-200 195.0 – 210.0 182.0 195.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-220 210.0 – 233.0 198.0 211.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-250 233.0 – 260.0 225.0 238.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-275 260.0 – 285.0 247.0 260.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-300 285.0 – 310.0 270.0 283.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-320 310.0 – 335.0 292.0 305.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-350 335.0 – 365.0 315.0 328.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-375 365.0 – 385.0 337.0 350.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-400 385.0 – 410.0 360.0 373.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-425 410.0 – 440.0 382.0 395.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-450 440.0 – 475.0 405.0 418.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-500 475.0 – 510.0 450.0 463.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-550 540.0 – 575.0 495.0 508.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5VL-600 575.0 – 625.0 540.0 553.2 10.5 A + 5.0 A + 20.0 8.0 ± 1.5


VL Seal

D

E A F

G

B C

B C

D

E A F

G

E A F

G

B C

D

E A F

G

C

D

B



36

Yuan

Bo E

ngin

eeri

ng C

o., L

td.

[email protected]


A BPart

NumberShaft

DiameterSeal I.D.

VE-450 450.0 – 455.0 439.0VE-455 455.0 – 460.0 444.0VE-460 460.0 – 465.0 448.0VE-465 465.0 – 470.0 453.0VE-470 470.0 – 475.0 458.0VE-475 475.0 – 480.0 463.0VE-480 480.0 – 485.0 468.0VE-485 485.0 – 490.0 473.0VE-490 490.0 – 495.0 478.0VE-495 495.0 – 50.0 483.0VE-500 50.0 – 505.0 488.0VE-505 505.0 – 510.0 493.0VE-510 510.0 – 515.0 497.0VE-515 515.0 – 520.0 502.0VE-520 520.0 – 525.0 507.0VE-525 525.0 – 530.0 512.0VE-530 530.0 – 535.0 517.0VE-535 535.0 – 540.0 521.0VE-540 540.0 – 545.0 526.0VE-545 545.0 – 550.0 531.0VE-550 550.0 – 555.0 536.0VE-555 555.0 – 560.0 541.0VE-560 560.0 – 565.0 546.0VE-565 565.0 – 570.0 550.0VE-570 570.0 – 575.0 555.0VE-575 575.0 – 580.0 560.0VE-580 580.0 – 585.0 565.0VE-585 585.0 – 590.0 570.0VE-590 590.0 – 60.0 575.0VE-600 60.0 – 610.0 582.0VE-610 610.0 – 620.0 592.0VE-620 620.0 – 630.0 602.0VE-630 630.0 – 640.0 612.0VE-640 640.0 – 650.0 621.0VE-650 650.0 – 660.0 631.0

Common Specification of VE Seal

A BPart

NumberShaft

DiameterSeal I.D.

VE-660 660.0 – 670.0 640.0VE-670 670.0 – 680.0 650.0VE-680 680.0 – 690.0 660.0VE-690 690.0 – 70.0 670.0VE-700 70.0 – 710.0 680.0VE-710 710.0 – 720.0 689.0VE-720 720.0 – 730.0 699.0VE-730 730.0 – 740.0 709.0VE-740 740.0 – 750.0 718.0VE-750 750.0 – 758.0 728.0VE-760 758.0 – 766.0 735.0VE-770 766.0 – 774.0 743.0VE-780 774.0 – 783.0 751.0VE-790 783.0 – 792.0 759.0VE-800 792.0 – 801.0 768.0VE-810 801.0 – 810.0 777.0VE-820 810.0 – 821.0 786.0VE-830 821.0 – 831.0 796.0VE-840 831.0 – 841.0 805.0VE-850 841.0 – 851.0 814.0VE-860 851.0 – 861.0 824.0VE-870 861.0 – 871.0 833.0VE-880 871.0 – 882.0 843.0VE-890 882.0 – 892.0 853.0VE-900 892.0 – 912.0 871.0VE-920 912.0 – 922.0 880.0VE-930 922.0 – 933.0 890.0VE-940 933.0 – 944.0 90.0VE-950 944.0 – 955.0 911.0VE-960 955.0 – 966.0 921.0VE-970 966.0 – 977.0 932.0VE-980 977.0 – 988.0 942.0VE-990 988.0 – 999.0 953.0

VE-1000 999.0 – 1010.0 963.0VE-1020 1010.0 – 1025.0 973.0

A BPart

NumberShaft

DiameterSeal I.D.

VE-1040 1025.0 – 1045.0 990.0VE-1060 1045.0 – 1065.0 108.0VE-1080 1065.0 – 1085.0 1027.0VE-1100 1085.0 – 1105.0 1045.0VE-1120 1105.0 – 1125.0 1065.0VE-1140 1125.0 – 1145.0 1084.0VE-1160 1145.0 – 1165.0 1103.0VE-1180 1165.0 – 1185.0 1121.0VE-1200 1185.0 – 1205.0 1139.0VE-1220 1205.0 – 1225.0 1157.0VE-1240 1225.0 – 1245.0 1176.0VE-1260 1245.0 – 1270.0 1195.0VE-1280 1270.0 – 1295.0 1218.0VE-1300 1296.0 – 1315.0 1240.0VE-1325 1315.0 – 1340.0 1259.0VE-1350 1340.0 – 1365.0 1281.0VE-1375 1365.0 – 1390.0 1305.0VE-1400 1390.0 – 1415.0 1328.0VE-1425 1415.0 – 1440.0 1350.0VE-1450 1440.0 – 1465.0 1374.0VE-1475 1465.0 – 1490.0 1397.0VE-1500 1490.0 – 1515.0 1419.0VE-1525 1515.0 – 1540.0 1443.0VE-1550 1540.0 – 1570.0 1467.0VE-1575 1570.0 – 160.0 1495.0VE-1600 160.0 – 1640.0 1524.0VE-1650 1640.0 – 1680.0 1559.0VE-1700 1680.0 – 1720.0 1596.0VE-1750 1720.0 – 1765.0 1632.0VE-1800 1765.0 – 1810.0 1671.0VE-1850 1810.0 – 1855.0 1714.0VE-1900 1855.0 – 1905.0 1753.0VE-1950 1905.0 – 1955.0 1794.0VE-2000 1955.0 – 2010.0 1844.0

VE Seal

D

E A F

G

B C

B C

D

E A F

G

E A F

G

B C

D

E A F

G

C

D

B



yuanbo engineering co., ltd. · non-asbestos gasket is a general purpose sheet material reinforced...

Documents