Summary

Zenmuse H3-3D Gimbal SJCAM adapter (based on SJ5000+)The cable can be made by removing the USB connector from gopro hero3USB cable supplied with the gimbal and soldering the SJCAM/XIAOMI microUSB to AV cable instead (2nd photo).Adapter should be secured with 2 screws and a bit of hot glue in thecorners.The thin wall inside is the support, to be removed after print.TURN THE PART UPSIDE DOWN and align the part or tweak you slicer sothat the first layer of the middle plate is printed diagonally for best results.

UPDATE added the schematics of the cable.On sjcam/xiaomi AV cable there are two black ground wires, but theplacement does not matter since they are connected together inside theusb plug.

Hobby & Makers > RC & Robotics

sjcam quadcopter drone djiphantom dji adapter

Category: R/C Vehicles

Sulya

DJI PhantomZenmuse H3-3DGimbal SJCAMadapter

VIEW IN BROWSER

updated 25. 1. 2020 | published 25. 1. 2020

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

36.4 KBupdated 24. 1. 2020

Find source .stl files on Thingiverse.com

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

sjcam_h3-3d.stl