Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

Summary

Its a fine gridded fan-grill for radial fans, like they are used on the Prusa i3/ Prusa i3 MK2 / Prusa i3 MK2S / Anet A8.For installation it may be necessary to use longer screws, which aresupplied with the Prusa i3 printers, in their spare-parts bag. On printers,where the outtake of the fan faces downwards to the buildplate, the longermounting bracket, needs to be fastened at the upper left screw. Ireccomend to print the newer version, which is more quiet beacause of itslarger holes.

If needed I would be happy to provide you some source-files of this model.

3D Printers > Other Accessories

portal i3 fan aperture prusai3 prusa fangrill

L LUC4R4T0R

Aperture Fan Grill

VIEW IN BROWSER

updated 19. 11. 2019 | published 19. 11. 2019

3D M

ODEL

ONLY

719.9 KBupdated 19. 11. 2019

822.4 KBupdated 19. 11. 2019

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

aperture_fan_grill.stl

aperture_fan_grill_old.stl