xk09-plxr en ig cp20101220a - microsoft · update alert: firmware updates are posted to the web on...
TRANSCRIPT
Immobilizer Bypass module designed to bypass all GM vehicles equipped with Passlock I, Passlock II, VATS, and the new-style Passlock Immobilizer found in Buick, Cadillac, Chevrolet, Hummer, Isuzu, Oldsmobile, Pontiac and Saturn vehicles.
Vehicle Application Guide............................................................................................................................................
InstallationType 1..........................................................................................................................................................................Type 2..........................................................................................................................................................................Type 3..........................................................................................................................................................................Type 4..........................................................................................................................................................................Type 5..........................................................................................................................................................................Type 6..........................................................................................................................................................................
ProgrammingProgramming the Module............................................................................................................................................Resetting the Module..................................................................................................................................................
Important Installation Notes.........................................................................................................................................
Module LED Diagnostics.............................................................................................................................................
Warranty................................................................................................................................... ....... ...................... ..... .
02
040506070809
1011
12
13
14
Index
TECHNICAL SUPPORT / INFORMATION
web resources:www.xpresskit.com
www.xpressvip.com
www.directechs.com† Buick, Cadillac, Chevrolet, GMC, Hummer, Isuzu, Oldsmobile, Pontiac and Saturn are registered trademarks and property of their respective companies.
Installation Guide
Update Alert: Firmware updates are posted to the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
Vehicle Application GuidePage 2
Vehicles
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
PK
-Im
mo
bili
ze
rB
yp
as
s-
Da
taN
oK
ey
Re
q'd
Buick Legend:
Century 4 4 4 4 4 4 4 4 4 4 4 4 4 • � í ╜ʼnś�Ċ◘�í ╜ʼnś �í íو ت � 5ĂĊĂ�Ċ◘�5ĂĊĂ �55و�
LeSabre 4 4 4 4 4 • PK: Transponder & Immobilizer Override
Park Avenue 4 4 4 •
Regal 4 4 4 4 4 4 4 4 4 4 •
Riviera 4 4 4 4 4 4 •
Roadmaster 4 •
Skylark 5 5 5 •
Cadillac
Allante 4 4 4 •
Brougham 4 4 4 4 4 4 4 •
Concours 4 4 4 4 4 4 •
DeVille 4 4 4 4 4 4 4 4 4 4 •
Eldorado 4 4 4 4 4 4 4 4 4 4 4 •
Escalade 6 6 6 6 6 6 6 6 •
Fleetwood 4 4 4 4 4 4 4 •
Seville 4 4 4 4 4 4 •
Chevrolet
Astro 6 6 6 6 6 6 6 6 •
Avalanche 6 6 6 6 6 •
Blazer 6 6 6 6 6 6 6 6 •
Camaro 4 4 4 4 4 4 4 4 4 4 •
Caprice 4 4 4 •
Cavalier 6 6 6 6 6 6 5 5 5 5 •
Cobalt 1 •
Colorado 3 3 3 3 •
Corvette 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 •
Equinox 6 6 •
Express Van 6 6 6 6 6 6 6 6 6 6 •
HHR 1 •
Impala 6 6 6 6 6 6 •
Lumina Sedan 6 6 6 6 6 6 •
Malibu 6 6 6 6 6 6 6 •
Malibu Classic 6 6 •
Monte Carlo 6 6 6 6 6 6 6 6 6 6 6 •
S10 Pickup 6 6 6 6 6 6 6 6 •
Silverado 6 6 6 6 6 6 6 6 6 •
Silverado Classic 6 •
SSR 6 6 6 •
Suburban 6 6 6 6 6 6 6 6 6 •
Tahoe 6 6 6 6 6 6 6 6 6 •
TrailBlazer 6 6 6 6 6 6 6 •
GMC
Canyon 3 3 3 3 3 •
Envoy 6 6 6 6 6 6 6 6 6 6 6 •
Jimmy 6 6 6 6 6 6 6 6 •
Safari 6 6 6 6 6 6 6 6 •
Savana 6 6 6 6 6 6 6 6 6 6 •
Sierra 6 6 6 6 6 6 6 6 6 •
Sierra Classic 6 •
Sonoma 6 6 6 6 6 6 6 6 •
Yukon 6 6 6 6 6 6 6 6 6 •
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
Page 3
Vehicles
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
PK
-Im
mobilizer
Bypass-
Data
No
Key
Req'd
Hummer
H2 6 6 6 6 6 •
H3 3 3 3 •
Isuzu
Ascender 6 6 6 6 6 •
Hombre 6 6 6 •
i-280 3 3 •
i-290 3 3 •
i-350 3 3 •
i-370 3 3 •
Oldsmobile
Achieva 5 5 5 •
Alero 6 6 6 6 6 6 •
Aurora 4 4 4 4 4 •
Bravada 6 6 6 6 •
Cutlass 4 4 4 •
Cutlass Ciera 4 4 •
Cutlass Supreme 4 4 4 •
Eighty-Eight 4 4 4 4 4 •
Intrigue 6 6 6 6 6 •
LSS 4 4 4 •
Ninety-Eight 4 4 •
Regency 4 4 4 •
Pontiac
Bonneville 4 4 4 4 4 4 4 4 •
Firebird 4 4 4 4 4 4 4 4 4 4 •
Grand Am 6 6 6 6 6 6 6 5 5 5 •
Grand Prix 4 4 4 •
Pursuit 1 •
Sunfire 6 6 6 6 6 6 5 5 5 5 5 •
Torrent 6 •
Saturn
ION 2 2 2 2 2 •
Sedan Coupe 6 6 •
S-Series 6 6 6 6 6 •
VUE 6 6 6 6 6 6 •
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
Installation 1(See the Vehicle Application Guide on page 2 to determine the installation type.)
Page 4
Not required in D2D mode.
1 2 643 5
4
42
4
Programming Button
XK
09
Rem
ote
Sta
rter
1: (+) 12 V
2: RX3: (-) Ground
4: TX
20
(+) 12 VRX
(-) GroundTX
: Firmware upgrades (XKD2D65).Option A : Plug D2D harness directly into remote starter.Option B
(-) GWR (status) Output
(+) Starter Output
(+) Ignition Output
(-) Neutral Safety (DEI Platforms Only)
(+) Accessory Output
Parking Lights
(+) 12 V Input
(-) Ground
9: Red: (+) 12 V Input
10: Black: Ground Input
15: Yellow: Resistor Code Output
16: Brown: Mux
12: Yellow/Black: Resistor Code Output
13: Violet/Brown: Mux
17: Orange: Resistor Code Input
8: Pink: (+) Ignition Input
7: Violet: (+) Starter Input
1: Blue/White: (-) GWR (status) Input
Front View
Pin
5, W
hite
Pin
2, R
ed/W
hite
Pin
3, Y
ello
w
Pin
4, B
row
n
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
Installation 2(See the Vehicle Application Guide on page 2 to determine the installation type.)
Page 5
Not required in D2D mode.
1 2 64 53
4
42
4
Programming Button
XK
09
Rem
ote
Sta
rter
1: (+) 12 V
2: RX3: (-) Ground
4: TX
20
(+) 12 VRX
(-) GroundTX
9: Red: (+) 12 V Input
10: Black: Ground Input
15: Yellow: Resistor Code Output
16: Brown: Mux
12: Yellow/Black: Resistor Code Output
13: Violet/Brown: Mux
17: Orange: Resistor Code Input
8: Pink: (+) Ignition Input
7: Violet: (+) Starter Input
1: Blue/White: (-) GWR (status) Input
Fro
nt V
iew
Pin
5, W
hite
Pin 4, Brown
Pin
2, O
range
Pin
3, B
lue
: Firmware upgrades (XKD2D65).Option A : Plug D2D harness directly into remote starter.Option B
(-) GWR (status) Output
(+) Starter Output
(+) Ignition Output
(-) Neutral Safety (DEI Platforms Only)
(+) Accessory Output
Parking Lights
(+) 12 V Input
(-) Ground
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
Installation 3(See the Vehicle Application Guide on page 2 to determine the installation type.)
Page 6
Not required in D2D mode.
2 63 4 51
4
42
4
Programming Button
XK
09
Rem
ote
Sta
rter
1: (+) 12 V
2: RX3: (-) Ground
4: TX
20
(+) 12 VRX
(-) GroundTX
9: Red: (+) 12 V Input
10: Black: Ground Input
15: Yellow: Resistor Code Output
16: Brown: Mux
12: Yellow/Black: Resistor Code Output
13: Violet/Brown: Mux
17: Orange: Resistor Code Input 2: -
Key Sense Output
1: -
4: -
3: Orange/Red: Key Sense Output
8: Pink: (+) Ignition Input
7: Violet: (+) Starter Input
1: Blue/White: (-) GWR (status) Input
Fro
nt V
iew
Pin
4,
White
/Blu
e
Pin
3, W
hite
/Gre
en
Pin
2, W
hite
/Bla
ck
Connect Key ense Output the SWhite/ wire on Hummer H3 only.Blue
: Firmware upgrades (XKD2D65).Option A : Plug D2D harness directly into remote starter.Option B
(-) GWR (status) Output
(+) Starter Output
(+) Ignition Output
The Key Sense Output wire must be connected to the
pin on the left of the third connector.XK09 black
(-) Neutral Safety (DEI Platforms Only)
(+) Accessory Output
Parking Lights
(+) 12 V Input
(-) Ground
Pin
1, W
hite
/Re
d
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
Installation 4(See the Vehicle Application Guide on page 2 to determine the installation type.)
Page 7
Not required in D2D mode.
4
42
4
Programming Button
XK
09
Rem
ote
Sta
rter
1: (+) 12 V
2: RX3: (-) Ground
4: TX
20
(+) 12 VRX
(-) GroundTX
(-) Neutral Safety (DEI Platforms Only)
Parking Lights
(+) 12 V Input
(-) Ground
9: Red: (+) 12 V Input
10: Black: Ground Wire on VATS Connections
15: Yellow: Resistor Code Output
16: Brown: Mux
12: Yellow/Black: Resistor Code Output
13: Violet/Brown: Mux
8: Pink: (+) Ignition Input
7: Violet: (+) Starter Input
1: Blue/White: (-) GWR (status) Input
Connectionsfor VATS only
These white wires can be found in an orange, gray or black sleeve, originating from the ignition switch.
(-) GWR (status) Output
(+) Starter Output
(+) Accessory Output
(+) Ignition Output
: Firmware upgrades (XKD2D65).Option A : Plug D2D harness directly into remote starter.Option B
+12VDC
Ignition Key
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
(+) Accessory Output
Installation 5(See the Vehicle Application Guide on page 2 to determine the installation type.)
Page 8
Not required in D2D mode.
4
42
4
Programming Button
XK
09
Rem
ote
Sta
rter
1: (+) 12 V
2: RX3: (-) Ground
4: TX
20
(+) 12 VRX
(-) GroundTX
9: Red: (+) 12 V Input
10: Black: Ground Wire in Passlock Harness
15: Yellow: Resistor Code Output
16: Brown: Mux
White
Bla
ck
Yello
w
12: Yellow/Black: Resistor Code Output
13: Violet/Brown: Mux
8: Pink: (+) Ignition Input
7: Violet: (+) Starter Input
1: Blue/White: (-) GWR (status) Input
(-) GWR (status) Output
Bulb Test (Black 24ga Wire)
2: -
1: Violet Output/White: Bulb Test
4: -
3: -
BCM
Ignition Key
: Firmware upgrades (XKD2D65).Option A : Plug D2D harness directly into remote starter.Option B
+12VDC
(+) Starter Output
(+) Ignition 2 Output(+) Ignition 1 Output
OR
Sid
e B
lack
Bla
ck/White
Mid
dle
Bla
ck
(-) Neutral Safety (DEI Platforms Only)
Parking Lights
(+) 12 V Input
(-) Ground
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
(+) Starter Output
(+) Accessory Output
(+) Ignition 1 Output
(+) Ignition 2 Output
Installation 6(See the Vehicle Application Guide on page 2 to determine the installation type.)
Page 9
Not required in D2D mode.
4
42
4
Programming Button
XK
09
Rem
ote
Sta
rter
1: (+) 12 V
2: RX3: (-) Ground
4: TX
20
(+) 12 VRX
(-) GroundTX
9: Red: (+) 12 V Input
10: Black: Ground Wire in Passlock Harness
15: Yellow: Resistor Code Output
16: Brown: Mux
OR
12: Yellow/Black: Resistor Code Output
13: Violet/Brown: Mux
8: Pink: (+) Ignition Input
7: Violet: (+) Starter Input
1: Blue/White: (-) GWR (status) Input
(-) GWR (status) Output
BCM
White
Bla
ck
Yello
wY
ello
w
Red
/White
Ora
nge/B
lack
Ignition Key
: Firmware upgrades (XKD2D65).Option A : Plug D2D harness directly into remote starter.Option B
+12VDC
(-) Neutral Safety (DEI Platforms Only)
Parking Lights
(+) 12 V Input
(-) Ground
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
Module Programming
Types 1, 2 & 3 Types 4, 5 & 6
Page 10
To save and exit the Passlock Selection Type, press and hold theProgramming button until the LED flashes once rapidly, and thenturns OFF.
Release the Programming button. The LED will turn ON solid again.
Press the Programming button 1, 2 or 3 times to select the Passlock Type. LED will flashrepeat the ing pattern corresponding to the selected programming type.
- = Press button (1 ) once.1: Types 4 & 5 x- = Press button (2 ) twice.2: Type 6 x- = Press button (3 ) three times .3: Types 1, 2 & 3 x (default selection)
* The system is preset for Types 1, 2 & 3.
&
&
&Press & Hold
Release
2
4
5
3
Connect the module:If the module has already been programmed, the red LED will flash the number of times corresponding to its programming type. and then it will turn OFF; if it has not been programmed, the LED will repeat the flashing pattern of the default programming type, which is 3 times.
1Once all the wires are properly connected, plug the wire connector into the module.
If connected in D2D:Connect the 4-pin D2D harness first, and then connect the 2 -pin harness. (The order is important.)0
If connected in W2W:Connect the 2 -pin harness.0
Caution! The 20-pin connector can be easily plugged in backwards.
4-pin
2 -pin0
Off
On Solid
Flashes Once
&Press N Times
=
=
ProgrammingRequired
No ProgrammingRequired&
&
Insert and turn the key it to the ON position.
ON
START
OF
F
KEY
Key at IGN6 Insert and turn the key it to
START .the engine
Press and hold the Programming button while the vehicle is running. The LED turns OFF, flashes once rapidly, then turns ON. The relay inside the module makes one clicking sound.
ON
START
OF
F
KEY
Key at IGN6
7
& &Press & Hold
Relay
Clicks OnceOff, Flashes
Once, On
Flashes n Times
Flashes xN
Flashes x3 Off
Off
Press and hold the Programming button while key is at the ON position. The LED turns OFF, flashes once rapidly, and then then turns ON. The relay inside the module makes one clicking sound.
7& &
Press & Hold
Relay
Clicks OnceOff, Flashes
Once, On
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
The LED will turn OFF to indicate that the Passlock Resistor Code is now programmed into the module. Remove the key and t the feature est by remote starting he engine. t
Turn the key to the START position and hold it there. Press and hold the Programming button one more time.
The LED turns OFF, flashes once rapidly, and then then turns ON. The relay in the module will click once again.
8
9
Page 11
Resetting the Module
& & Relay
Clicks Once
&Press & Hold
ON
START
OF
F
KEY
Start and HoldOff, Flashes
Once, On
1
2
3
Disconnect the module from any power source.
Press and HOLD the Integrated Programming Button (IPB).While holding the button, connect the module to the power source.
Wait until the red LED flashes quickly for 1 second and then turns OFF.Release the IPB. The module reset is complete. &
Release
Disconnect from Power
&Press & Hold Connect to Power
Flashes x1 Second
& &Remote StartOff
ON
START
OF
F
KEY
Remove Key
& &Remote StartOff
ON
START
OF
F
KEY
Remove Key
Types 1, 2 & 3 Types 4, 5 & 6
The LED will turn OFF to indicate that the Passlock Resistor Code is now programmed into the module. Remove the key and test the feature by remote starting the engine.
8
For vehicles with a manual transmission, shift to the NEUTRAL position. It is important to carry out step 8 while NOT PRESSING ON THE CLUTCH PEDAL. With an automatic transmission, put the vehicle in Drive (D).
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
IGNITIONSWITCH
“CLUTCH SWITCH”(MANUAL CART)
Important Installation NotesPage 12
Installation , & 1 2 3Some vehicles such as the Saturn ION, GMC Canyon Chevrolet Colorado, do not have starter wires.and
Installation 5The wiring in some older Passlock 1 models may also have the following color sequence: Black/White, Black (GND), and Black (DATA).
Installation 6The Equinox uses a Passlock 2 even if it does not have a starter wire.
For some vehicles like the Equinox, it may not be required to have the transmission in the Drive (D) position during programming.
SOLUTION #1
USE TWO 6 AMPERE DIODES - Make connection closest to firewall
STARTER KILL(OPTIONNAL)
X
VIOLET
“STARTER” WIRE STARTER
FIREWALL87
87A
30
86 85
+12V BAT
STARTER KILL(OPTIONNAL)
“CLUTCH SWITCH”(MANUAL CAR)
X
VIOLET
“STARTER” WIRE STARTER
IGNITIONSWITCH
SOLUTION #2
FIREWALL
USE 1 RELAY SPDT TYPEMake connection closest tofirewall
Additional InformationSUBJECT: CAVALIER,SUNFIRE 1999 OR OLDER (PASSLOCK SUPPLIED WITH BULB TEST)Our technical department has noticed that on certain vehicles, such as Cavalier and Sunfire 1999 or older, a voltage residue coming from the starter, once the vehicle is started, is present as a pulse during a few seconds. This problem only occurs on some vehicles; therefore, with test light, once the key is back to the ignition position, after being started, the starter wire is to be tested. The cut must be made instantly. If it is not the case, install a 12-amp diode as described in the diagram below. This is to rectify situation.
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
LED Status Description TroubleshootingDuring Power Up
Flashes continuously
by increments of one
Type 4 or 5 will be selected for
programming.
Press and hold the Programming button
for 3 second to select the type.
Flashes onceType 4 or 5 was successfully
programmed.Normal operation.
Flashes continuously
by increments of twoType 6 will be selected for programming.
Press and hold the Programming button
for 3 second to select the type.
Flashes twice Type 6 was successfully programmed. Normal operation.
Flashes continuously
by increments of three
Type 1, 2 or 3 will be selected for
programming.
Press and hold the Programming button
for 3 second to select the type.
Flashes three timesType 1, 2 or 3 was successfully
programmed.Normal operation.
Solid redType 1, 2, 3 or 6 has been selected -
waiting to record ignition RCODE.
Turn the key to the ON position and
press on the Programming button until
you hear a clicking sound.
Solid redType 1, 2, 3 or 6 has been selected -
waiting to record start RCODE.
If the ignition recording is complete, turn
the key to the Start position and press on
the Programming button until you hear a
clicking sound.
Solid redType 4 or 5 has been selected - waiting
to record RCODE.
Turn the key to the ON position and
press on the Programming button until
you hear a clicking sound.
Module Reset
Flashes quickly for 1
secondThe module has been successfully reset.
If the module resets after programming,
check your resistor code wires.
Module LED Diagnostics
* In this instance of the module diagnostics, the LED flashes in a continuous sequence.
Page 13
x1sec
x3
x2
x1
x3*
x2*
x1*
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connexion with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.
For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.
This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.920-0007 07-06
PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7 , 0 4 6 , 1 2 6 B 1 ; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN. PATENT: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2 , 4 2 0 , 9 4 7 ; 2,426,670; 2,454,089 EUROPEAN PATENT:1,053,128 PAT. PENDING: 2,291,306; MADE IN CANADA
Limited One-Year Consumer WarrantyPage 14
Rev.: 20 201012
Platform: XK09Firmware: PLXR
© 2010 Directed Electronics. All rights reserved.The Mobile Integration Systems