E GLE RESE RCHTIONCORPOR

®

1076 State Route 34 | Hurricane, WV 255261.877.757.6565 | www.eagleresearchcorp.com

The XARTU/1-CP™ is designed to provide pipeline operators with a complete range of func�ons for remote monitoring, data acquisi�on, and control of cathodic protec�on systems used on buried steel pipelines, including:

■ Proper opera�on of pipeline rec�fiers■ Providing current informa�on to assist the operator in minimizing the poten�al for

catastrophic pipeline failures■ Historical informa�on for repor�ng purposes that can be used to aid in mee�ng the

requirements of 49CFR Part 192 for monitoring - Pipeline Poten�al, Current, AC/DC Voltages, Cri�cal Bonds

■ Remote Communica�ons via Phone, Cellular (TCP/IP), Radio or satellite■ Failure alarms, and real �me callout on alarms with op�onal communica�ons modules■ GPS Rec�fier Interrup�on■ Measure up to 6 Pipe to Soil voltages■ Graphical trending of Pipe to Soil poten�als to help iden�fy pipeline protec�on

deficiencies

The XA™ Series Cathodic Protec�on Monitor provides for reliable monitoring and control of CP rec�fiers and test points. The XARTU/1-CP™ greatly reduces �me spent doing periodic checks of rec�fiers by allowing remote monitoring of rec�fier sta�on voltage, rec�fier current, pipe/structure-to-soil poten�als and cri�cal bonds. Monitor status is reported using any of today’s wide variety or wireless methods of communica�ons including LEO Satellite, CDMA, GPRS/GSM Cellular, Spread Spectrum Radio or Cellular. An op�onal on-board modem is available as well for land-line telephone service.

The XARTU/1-CP™ can be configured to send alarms, and can also remotely interrupt CP units in a synchronized manner, elimina�ng the need for site visits. Control

ac�ons can be scheduled in the unit.

X RTU/1™ CATHODIC PROTECTION

The XARTU-CP™ provides new advantages to monitoring any standard CP Rec�fier, regardless of when it was built or where it is located.

■ 110/220VAC Design with Ba�ery Back-up

■ Compact, Rugged, Reliable ■ NEMA 4X Enclosure ■ Quick Release / Lockable Hasp■ Programmable Historical Data Storage■ SBC61 Processor - 9010346

■ (6) 4-20mA / 1-5VDC Inputs ■ (5) Mul�-Purpose Digital IO ■ (1) Form C ■ (1) OPTO 22■ (2) RS232 Ports■ 4 Line Alphanumeric LCD Displays with Magne�c Scroll■ Full Alarm Call-Back with Op�onal

Speech Modem for Cri�cal Voice Interac�on

■ Sample and Hold Precision Rec�fier Monitoring with Surge Suppression

■ GPS Interrup�on available for synchronized interrup�ng and tes�ng

Data may be presented in grid or graph form for studies and surveys. Data may also be exported for use in spreadsheets or database applica�ons used to maintain/ report CP quality.

The XARTU-CP™ can also be configured to monitor test points. The XARTU-CP™ Test Point Monitor measures pipe to soil poten�als and/or cri�cal bonds as required. As test points are generally mounted far from the rec�fier and AC power, the XARTU-CP™ test point monitor uses a solar PV panel and an Eagle Solar Charger Board.

■ Solar powered design with ba�ery backup

■ Rugged and Reliable ■ NEMA 4X Enclosure ■ Quick Release / Lockable Hasp■ Programmable Historical Data Storage■ SBC61 Processor - 9010346

■ (6) 4-20mA / 1-5VDC Inputs ■ (5) Mul�-Purpose Digital IO ■ (1) Form C ■ (1) OPTO 22■ (2) RS232 Ports■ Four-Line Alphanumeric LCD Displays

with Magne�c Scroll■ Full Alarm Call-Back with Op�onal

Speech Modem for Cri�cal Voice Interac�on

■ Sample and Hold Precision Test Point and Cri�cal Bond Monitoring with Surge Suppression

E GLE RESE RCHTIONCORPOR

®

It is always our goal at Eagle Research® to assist our customers in the safe opera�on of their steel pipeline assets. A link to the Electronic Version of 49CFR part 192 can be found at the Eagle Research® Website in the Links Sec�on - www.eagleresearchcorp.com

Eagle Research Corpora�on® provides two op�ons for normally closed cathodic interrup�on relays, a mercury relay and a solid state relay.

X RTU/1-CP™ RECTIFIER MONITOR X RTU/1-CP™ TEST POINT MONITOR

Mercury Relay Specifica�ons:■ Load: 100 Amps AC at 120 Volts AC■ Load: 90 Amps AC at 208 Volts AC■ Load: 90 Amps AC at 240 Volts AC■ Load: 100 Amps DC at 1-48 Volts DC■ Load: 50 Amps DC at 120 volts DC

Solid State Relay Specifica�ons:■ Load: 90 Amps AC

from 24-280 Volts AC

1076 State Route 34 | Hurricane, WV 25526 | 1.877.757.6565 | www.eagleresearchcorp.com | Rev 16_06