x 3700 175 165 t specifications sheet
TRANSCRIPT
-
8/14/2019 X 3700 175 165 T Specifications Sheet
1/16
X-SERIESX-SERIESS RI Ssolar outdoor lighting systemsolar outdoor lighting systemSolar Lighting International is the leading manufacture
of the worlds brightest solar light, the X-Series.
SLIs WhiteLighttechnology sets new standards for
illumination, security and night-time visibility.
-
8/14/2019 X 3700 175 165 T Specifications Sheet
2/16
X-3700-175-165-T HID MPPT Solar Lighting System
SOLAR ARRAY
Qty. 1- Top of Pole Solar mounting rack series 5000 SeriesQty. 1- 165/170/175/180/185 watt solar module (Sharp or equal)
Qty. 1 MC quick connector set to wire array to power center
POWER CENTER
Qty. 1- Aluminum enclosure, pre-wired with keyed lock on front panel
(All enclosures will have the same keyed lock)
Qty. 2- Knockouts with 2 liquid tight strain reliefs includedQty.1- Solar Lighting International Maximum Power Point Tracking (MPPT) charge
controller
Qty. 2- 30A breaker for safetyQty. 1-Gel battery pack
Qty. 2- 2-24 inch galvanized threaded rod with 4 washers and 4 nuts to mount power
pack to pole
LUMINAIRE TESTED AT FACTORY PRIOR TO SHIPMENT
Qty. 1- GE MR2C Full cut off Dark Sky compliant cobrahead
Qty. 1- SLI X-Series Ballast and igniter assemblyQty. 1- X-HID 3700 Lumen Metal Halide type light Capsule/ Bulb
Qty. 15 Feet of sunlight resistant 10/2 wire
Pole and arm sold separately.
-
8/14/2019 X 3700 175 165 T Specifications Sheet
3/16
Series 5000 Single Row Pole Topwith SolarMountRails
Installation Manual 501.5
Un
irac
Insta
llation
ManualSeries
Unirac welcomes input concerning the accuracy and user-friendliness of this publication. Please write to [email protected].
Pub 090616June 200
2009 by UniraAll rights reser
See www.unirac.comfor your nearest Unirac distributor.
Unirac
In
stallation
Manual
U.S. Des. Patent No. D496,248S. Other patents pending.
Stainless steel hardware can seize up,a process called galling. To significantly
reduce its likelihood, (1) apply lubricantto bolts, preferably an anti-seize lubricant, avail-
able at auto parts stores, (2) shade hardware
prior to installation, and (3) avoid spinning onnuts at high speed. See Installation Supplement
910, Galling and Its Prevention,at www.Unirac.com.
Parts List (Parts are illustrated in exploded views, pp. 24.)
Wrench
Part Qty size
Channel 1Bracket, left 1
Bracket, right 1SolarMount standard rail, drilled 2
U-bolt, 38 2Hex head bolt, 38 8 916
Flange nut, 38 4 916
Self tapping screw, no.10 zinc 2
Module clip 4*
Module bolt, 4* 716Flat washer, 4*
Flange nut, 4* 716
The installer is solely responsible for:
complying with all applicable building codes, in-cluding any that supercede these instructions;
pole installation appropriate to local wind and soil
conditions;
using only Unirac parts and installer-supplied parts
as specified by Unirac (substitution of parts will
void the warranty); installing all electrical aspects of the PV array.
Thank you for purchasing a Unirac. Please read these
guidelines completely before proceeding.
This rack is intended for a 2.5-inch (65 mm) Schedule 40
steel pole, outside diameter 2.875 inches (73.0 mm). Forlarger diameter poles, Unirac can fill special orders for
larger U-bolts.
* Per module to be mounted. Series 5000 racks include module hardware tomount 1 or 2 modules, depending on the model number.
-
8/14/2019 X 3700 175 165 T Specifications Sheet
4/16
Page
3
Installation Manual 501.5 Series 5000
AssemblyAssembly order is not criticalexcept for installation of the self-tapping
screws, which occurs last. You may work either from the pole outward, or youmay complete the rack/PV module assembly before mounting it to the pole.
Loosely assemble all components.
Be certain that the channel is centered on the pole and that brackets sit with thepivot hole above the arc hole.
Pre-drilled hole
SolarMountrail
Self tappingscrew
Bracket
Pre-drilled hole
Channel
Pivot hole
Arc hole
-
8/14/2019 X 3700 175 165 T Specifications Sheet
5/16
The SunWize 170/175/180 module falls into the mid-range of price and efficiency and
is aimed at residential and commercial grid-tie applications. It is made of high efficiency
mono-crystalline silicon solar cells. Every cell is tested and electronically matched to
maximize output. The modules are manufactured according to the strict requirements of
international and US quality standards. 25-year limited warranty.
Features include:
Cells are laminated between sheets of ethyl vinyl acetate (EVA) for moisture free
protection, UV stability and electrical isolation
Tempered, high-transmittance glass is used for strength and high power output
The module is framed with a strong, corrosion-resistant clear anodized aluminum with
multiple mounting holes for ease of installation
Modules are equipped with multi-string by-pass diodes so that the modules will function
even if partially shaded
Highly resistant to hail, moisture, wind speed and other environmental factors
Junction box is equipped with + and MC 3mm (36 male/female) cables
Wide operating range: from -45C to 95C with 100% relative humidity
US listed to UL-1703, cUL and IEC international standards
SunWize
SW170/175/180 Solar ModuleHigh performance for commercial and residential applications
RELIABLE PEOPLE ::: RELIABLE PRODUCTS ::: RELIABLE POWER
Model Rated Power Rated Voltage Rated Current Open Circuit Short Circuit
(Watts) (Vmp) (Imp) Voltage (Voc) Current (Isc)
SW170 170 36.25V 4.69A 43.9V 5.15A
SW175 175 36.50V 4.80A 43.9V 5.20A
SW180 180 36.60V 4.92A 44.0V 5.30A
Standard Test Conditions: 1000 W/m2, 25C, AM 1.5
-
8/14/2019 X 3700 175 165 T Specifications Sheet
6/16
SW170/175/180 Solar Module
SW170/175/180
Dimension inches mm
A 62.20 1580
B 31.81 808
C1 1.65 42
C2 0.53 13
D 31.49 800
E 30.15 766
F .27 7
G 1.25 32
Weight 37.5 lbs. 17 kg.(approx.)
WarrantyThe SunWize SW170 /175/180 module carries a
25-year limited warranty on power output.
CerticationsAll SW modules are UL-1703 and cUL listed and
ISPRA certied to international standards.
Electrical Performance
Voltage (V)
Current(A)
Electrical / Thermal Parameters
Cell Type Moncrystalline Silicon
Circuit Interconnection 72 125 x 125 mm cells, connected in series
Max System Voltage 600Vdc
Series Fuse Rating 12 Amps
NOCT 49C
Voltage Temperature coefficient (Voc) -0.34%/C
Current Temperature coefficient (Isc) 0.09%/C
Power Temperature coefficient (Pmax) -0.37%/C
-
8/14/2019 X 3700 175 165 T Specifications Sheet
7/16
-
8/14/2019 X 3700 175 165 T Specifications Sheet
8/16
-
8/14/2019 X 3700 175 165 T Specifications Sheet
9/16
-
8/14/2019 X 3700 175 165 T Specifications Sheet
10/16
-
8/14/2019 X 3700 175 165 T Specifications Sheet
11/16
-
8/14/2019 X 3700 175 165 T Specifications Sheet
12/16
-
8/14/2019 X 3700 175 165 T Specifications Sheet
13/16R-8/2001
M-250ROADWAYLIGHTING
GE Lighting Systems, Inc.www.gelightingsystems.com
Registered Trademark of General Electric C
Trademark of General Electric CompanyData subject to change without notice
ORDERING NUMBER LOGIC
PRODUCTIDENTXXXX
LIGHTSOURCEX
VOLTAGE
X
BALLASTTYPEX
IES DISTRIBUTIONTYPEXXX
LENS TYPE (PRISMATIC)REFRACTORX
OPTIONS
XXX
M2RC =M-250R2 withCutoff Optics
S = HPSC = MercStandard:Lamp notincluded.
60Hz0 = 120/208/
240/277Multivolt
1 = 1202 = 2083 = 2404 = 2775 = 4807 = 120X2408 = 240V
Ballast 120V PEReceptacle notreconnectable
D = 3 47F = 120X347T = 220
W = 230
50Hz6 = 220R = 230Y = 240
NOTE: Dualvoltage connectedfor lower voltage
See Ballast Selection TableA = AutoregC = Merc-RegG = Mag-Reg with
Grounded Socket ShellH = HPF Reactor or LagM= Mag-RegN = NPF Reactor or LagP = CWI with Grounded
Socket Shell
See PhotometricSelection Table
S = ShortM = Medium
C = Cutoff
2 = Type II3 = Type III
See PhotometricSelection TableA = Acrylic Clear
GlobeG = GlassL = Polycarbonate
Clear Globe
NOTE:150 watt Maximumwith Acrylic orPolycarbonateRefractors.
C = Charcoal filterF = Fusing (Not
available withmultivolt or dualvoltage)
J = Line SurgeProtector,Expulsion Type
WATTAGE
XX
05 = 5007 = 7010 =10015 =150
(55V)17 =17520 =20021 =100/150
(55V)25 =250
NOTE: Dualwattageconnected
for lowerwattage
2
PE FUNCTION
X
1 = None2 = PE Receptacle
NOTE:Receptacle connectedsame voltage as unitexcept as noted. OrderPE Control separately.
M-250R2 LUMINAIRE
WITH CUTOFF OPTICSAPPLICATIONS For residential streets, access roads, parking lots and other outdoor areas
Universal two-bolt slipfitter Die-cast aluminum housing withelectrocoat gray paint finish
Adjustable mogul base socket(street side) E39 standard
ALGLAS finish on reflector No-tool PE receptacle Plug-in ignitor True 90 cutoffno light
above 90 (meets RP8-2000 forfull cutoff)
External stainless steel baillatch CSA Certified unit available,
contact factory Standard construction is IP55 Plastic Pest guard standard (not
required for 2 in. pipe)
SPECIFICATION FEATURES
All light sources are clear unless otherwise indicated.PHOTOMETRIC SELECTION TABLE
Light LensWattage Source Type MC2* MC3* SC2*50,70,100,150 (55 V) HPS Aor L N/A 9168 (1A) N/A50,70,100,150 (55 V) HPS G 7293(2CL) 7292(1CL) N/A200, 250 HPS G 7306 (2DH) 7305 (1DH) N/A100, 175, 250 Merc G N/A N/A 7300(1B)NOTE: N/A=Not Available
*Meets RP8-2000 for full cutoff
IES Distribution TypePhotometric Curve Number 35-17 ----(Soc Pos)
M2RC 15 S 1 N 2 G MC3 F
-
8/14/2019 X 3700 175 165 T Specifications Sheet
14/162001/R-9GE Lighting Systems, Inc.
www.gelightingsystems.com
Registered Trademark of General Electric Company
Trademark of General Electric CompanyData subject to change without notice
REFERENCESSee Page R-38 for start of Accessories.See Page R-42 for Explanation of Options and Other Terms Used.See Pole and Bracket Section Page P-2 for pole selection.
DATAApproximate Net Weight 20-30 lbs 9-14 kgsEffective Projected Area
Flat Glass Unit 0.6 sq. ft. max 0.06 sq. M maxClear Acrylic orPolycarbonate Globe Unit 1.0 sq. ft. max 0.09 sq. M max
Suggested Mounting Height 20-40 ft. 6-12 M
M-250R2 LUMINAIRE
WITH CUTOFF OPTICS
FIXTURE DIMENSIONS
Light Multi- 347, 240/120Wattage Source volt 120 208 240 277 480 120X240 120X347 PE R 220 230 220 230 24050 HPS H,N H,N H,N H,N H,N H,N H,N H,N H,N N/A N/A N/A N/A N/A70,100,150 (55V) HPS A,H,N A,G,H,M,N,P A,G,H,M,N A,G,H,M,N,P A,G,H,M,N G,M G,H,M,N,P G*,H,M*,N G,H,M,N H,M,N N/A H,M,N H N/A100/150 (55V) HPS N/A H,N N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A200, 250 HPS A,P A,H,N,P A,H,N,P A,H,N,P A,P A,P A,P A**,P A,H,N H H A,H,N H H
100, 175 Merc C C,N C C,H,N C C C N/A C,H,N N/A N/A N/A N/A N/A
250 Merc C A,C,N C C,H,N C C C N/A C,H,N N/A N/A H N/A H
NOTE: N/A = Not AvailableNOTE:*Not available in 120X347 voltNOTE:**Not available in 200 watt
Ballast Type/Voltage60Hz 50Hz
BALLAST SELECTION TABLE
M2AC SUGGESTED CATALOG ORDERING NUMBERS
Catalog Number Wattage Light Source Voltage Bal last Refractor Photometr ic(60 Hz) Type Type Distribution
M2RC07S1N2GMC3 070 HPS 120 NPF Reactor Glass MC3M2RC10S1N2GMC3 100 HPS 120 NPF Reactor Glass MC3M2RC15S0A2GMC3 150 HPS 120 NPF Reactor Glass MC3
All GE suggested catalog ordering numbers come with PE receptacle. PE control must be orderedseparately. Order and install SCCL-PECTL if no PE is desired.
Multivolt ballasts can be for either 120, 208, 240, or 277 volt incoming power supply.
-
8/14/2019 X 3700 175 165 T Specifications Sheet
15/16
-
8/14/2019 X 3700 175 165 T Specifications Sheet
16/16