www.planet.com.tw

IPX-1900 Single-Side ConfigurationSingle-Side Configuration

Internet Telephony PBX System

Copyright © PLANET Technology Corporation. All rights reserved.

2 / 8

www.planet.com.tw

FAQ : IPX-1900 Single-Side ConfigurationFAQ : IPX-1900 Single-Side Configuration??

Please refer to the following descriptions and insert proper parameters configurations into the device for establish the voice communications.

3 / 8

www.planet.com.tw

Select the [Select the [IP PBX Setup -> Extension Management - > SIP Extension] of ] of IP PBX to create the extension number.to create the extension number.

11

User Extension :User Extension :10 (For Local LAN)(For Local LAN)Password : Password : 123Caller Id: Caller Id: 10

22

4 / 8

www.planet.com.tw

Select the [Select the [IP PBX Setup -> Extension Management - > FXS Extension] of of IP PBX to create the extension number.to create the extension number.

33

User Extension :User Extension :20 (For Local LAN)(For Local LAN)Password : Password : 123

44

5 / 8

www.planet.com.tw

55

Select the [Select the [Trunk Management -> FXO Trunk] of ] of IP PBX to check the FXO Num has appear normally or not.to check the FXO Num has appear normally or not.

FXO List: FXO List: 2, 3, and 4..

66

6 / 8

www.planet.com.tw

Select the [Select the [Trunk Management - > Trunk Group] of ] of IP PBX to add Trunk Groups. to add Trunk Groups.

7788

Create Trunk Group:Create Trunk Group: PSTN Select Trunk Ports :Select Trunk Ports : 2 , 3, and 4 Number :Number : 8

7 / 8

www.planet.com.tw

Test the Scenario: PHONE1 can call PHONE2 via dial the number: 20 PHONE2 can call PHONE1 via dial the number: 10 There are two ways to call out via PSTN line from PHONE1/PHONE

2, it is necessary to press “8” first, and then dial the phone number you wish to call out.

e.g PHONE1/PHONE2 press “812345678” to call PHONE3 e.g PHONE1/PHONE2 press “8” first, the dial-tone will ring, and then press “12345678” to call PHONE3.

www.planet.com.tw