www.planet.com.tw ipx-300/1900 series how to connect with analog pbx via fxo module or fxs/fxo...

17
www.planet.com.tw IPX- IPX- 300 300 /1 /1 9 9 00 Series 00 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright © PLANET Technology Corporation. All rights reserved.

Upload: jade-hunter

Post on 12-Jan-2016

224 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

www.planet.com.tw

IPX-IPX-300300/1/19900 Series00 SeriesHow to connect with Analog PBX via FXO Module or FXS/FX

O Gateway Configuration

Internet Telephony PBX System

Copyright © PLANET Technology Corporation. All rights reserved.

Page 2: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

2 / 17

www.planet.com.tw

Please refer to the following descriptions and insert proper parameters configurations into the device for establish the voice communications.

Page 3: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

3 / 17

www.planet.com.tw

Installation Scenario:

1. Company A connect with CO line with FXS gateway

The local extension (# 600) could communicate with other company and IP Phone via network.

2. Company B connect with Analog line with FXO gateway

The local extension (# 700) could communicate with other company and IP Phone via network.

3. Company C connect with Analog line with FXO module of IPX-1900

The local extension (# 800) could communicate with other company and IP Phone via network.

Page 4: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

4 / 17

www.planet.com.tw

Select the [Select the [IP PBX Setup -> SIP ExtensionIP PBX Setup -> SIP Extension] of ] of IPX-1900 IPX-1900 to create to create the extensions for IP Phone, FXO/FXS gateway.the extensions for IP Phone, FXO/FXS gateway.

11

Page 5: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

5 / 17

www.planet.com.tw

Select the [Select the [IP PBX Setup -> FXO TrunkIP PBX Setup -> FXO Trunk] of ] of IPX-1900 IPX-1900 to to define DID to IVR settings.define DID to IVR settings.

22

Page 6: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

6 / 17

www.planet.com.tw

Select the [Select the [IP PBX Setup->Gateway TrunkIP PBX Setup->Gateway Trunk] of ] of IPX-1900 IPX-1900 to create to create the Gateway Trunk for the FXS/FXO gateway.the Gateway Trunk for the FXS/FXO gateway.

33

44

IP :IP : 172.16.0.3 (FXO Gateway) 172.16.0.3 (FXO Gateway)Port : Port : 5060 (SIP Port) 5060 (SIP Port) Afterward click the Afterward click the InsertInsert to add that to add that

Page 7: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

7 / 17

www.planet.com.tw

55

66

Select the [Select the [IP PBX Setup -> Trunk GroupIP PBX Setup -> Trunk Group] of ] of IPX-1900 IPX-1900 to add the Trunk Groupto add the Trunk Group

To add a Trunk Group for FXO moduleTo add a Trunk Group for FXO moduleGroup Name : Group Name : Company_CCompany_CNumber :Number : 90 90Trunk Group :Trunk Group : FXO_Port_1 FXO_Port_1

FXO_Port_2FXO_Port_2

Page 8: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

8 / 17

www.planet.com.tw

77

88

Select the [Select the [IP PBX Setup -> Dialing RulesIP PBX Setup -> Dialing Rules] of ] of IPX-1900 IPX-1900 to add the Dialing Rule for FXO Gatewayto add the Dialing Rule for FXO Gateway

To add a Dialing Rules for FXO GatewayTo add a Dialing Rules for FXO GatewayPhone NO. : Phone NO. : 92.92.Delete Length :Delete Length : 0 0Trunk Group :Trunk Group : 172.16.0.2:5060 172.16.0.2:5060

Page 9: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

9 / 17

www.planet.com.tw

Create an Hunt Group :Create an Hunt Group :Group Name : Group Name : Company_ACompany_AHunt Mode : Hunt Mode : Round RobinRound RobinHunt Group Service Number : Hunt Group Service Number : 9191Ring Timeout : Ring Timeout : 3030Ring Group : Ring Group : 201, 202, 203, 204201, 202, 203, 204

99

1010

Select the [Select the [Hunt Group SettingHunt Group Setting] of ] of IPX-1900 IPX-1900 to add a to add a Hunt Group for FXS Gateway.Hunt Group for FXS Gateway.

Page 10: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

10 / 17

www.planet.com.tw

Click on the button to save Click on the button to save previous modification and take effect, the previous modification and take effect, the system will rebooting, please wait for 50 secsystem will rebooting, please wait for 50 sec

1111

1212

Select the [Select the [Save & LogoutSave & Logout] of ] of IPX-1900 IPX-1900 to create a to create a SIP trunk which connect with GatewaySIP trunk which connect with Gateway

Page 11: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

11 / 17

www.planet.com.tw

Select the [Select the [Advance Setup ->VoIP BasicAdvance Setup ->VoIP Basic] of ] of FXS FXS GatewayGateway to setting port number configuration. to setting port number configuration.

VoIP Basic Configuration:VoIP Basic Configuration:Number :Number :201, 202, 203, 204201, 202, 203, 204Check RegCheck RegAccount:Account: 201, 202, 203, 204 201, 202, 203, 204Password: 123Password: 123Use Public Account:Use Public Account: Disable Disable

1313

1414

Page 12: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

12 / 17

www.planet.com.tw

SIP Proxy Setting:SIP Proxy Setting:Domain/Realm:Domain/Realm:172.16.0.1172.16.0.1SIP Proxy Server:SIP Proxy Server:172.16.0.1/5060172.16.0.1/5060SIP Authentication :SIP Authentication : EnableEnable

About the IP address About the IP address please refer to previous please refer to previous topology.topology.

1515

Page 13: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

13 / 17

www.planet.com.tw

Select the [Select the [Advance Setup ->VoIP BasicAdvance Setup ->VoIP Basic] of ] of FXO FXO GatewayGateway to setting port number configuration. to setting port number configuration.

VoIP Basic Configuration:VoIP Basic Configuration:Number :Number :301, 302, 303, 304301, 302, 303, 304Check RegCheck RegAccount:Account: 301, 302, 303, 304 301, 302, 303, 304Password: 123Password: 123Use Public Account:Use Public Account: Disable Disable

1616

1717

Page 14: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

14 / 17

www.planet.com.tw

SIP Proxy Setting:SIP Proxy Setting:Domain/Realm:Domain/Realm:172.16.0.1172.16.0.1SIP Proxy Server:SIP Proxy Server:172.16.0.1/5060172.16.0.1/5060SIP Authentication :SIP Authentication : EnableEnable

About the IP address About the IP address please refer to previous please refer to previous topology.topology.

1818

Page 15: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

15 / 17

www.planet.com.tw

Select the [Select the [Dialing PlanDialing Plan] of ] of FXO GatewayFXO Gateway to add the to add the Dialing Plan Number.Dialing Plan Number.

Incoming Dial Plan Settings:Incoming Dial Plan Settings:Outgoing no: Outgoing no: 92x92x Length of Number: Length of Number: 3 ~ 63 ~ 6Delete Length: Delete Length: 22Prefix no.: Prefix no.: NoneNoneDestination Telephone Port :Destination Telephone Port : 1,2,3,4 1,2,3,4

1919

2020

Page 16: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

16 / 17

www.planet.com.tw

For example:A. From Company A 1. To IP Phone: #600 dial #601~604, hear dial tone, dial 200 2. To Company B: #600 dial #601~604, hear dial tone, dial 92700 3. To Company C: #600 dial #601~604, hear dial tone, dial 90, hear dial tone, dial 800 B. From Company B 1. To IP Phone: #700 dial #701~704, hear dial tone, dial 200 2. To Company A: #700 dial #701~704, hear dial tone, dial 91 , hear dial tone, dial 600 3. To Company C: #700 dial #701~704, hear dial tone, dial 90, hear dial tone, dial 800

C. From Company C 1. To IP Phone: #800 dial #801~802, hear welcome prompt, dial 200 2. To Company A: #600 dial #801~802, hear welcome prompt, dial 91 , hear dial tone, dial 600 3. To Company B: #600 dial #801~802, hear welcome prompt, dial 92700

C. From IP Phone 1. To Company A: IP Phone dial 91, hear dial tone, dial 600 2. To Company B: IP Phone dial 92700 3. To Company C: IP Phone dial 90, hear dial tone, dial 800

Page 17: Www.planet.com.tw IPX-300/1900 Series How to connect with Analog PBX via FXO Module or FXS/FXO Gateway Configuration Internet Telephony PBX System Copyright

www.planet.com.tw