www. macleodhouse .c ommacleodhouse.com.au › files › 16 › catalogues › 2 › storage... ·...

165 Macleod Street, Bairnsdale VIC 3875

Phone 1300 306 151 Email [email protected]

w w w . m a c l e o d h o u s e . C o M . a u

1 P r o d u c t c at a l o g u e

r ac k i n g & s h e lv i n g

a b o u t u s

RacKING & shelVING

GLOBAL PALLET RACKING 1

Pallet Racking Accessories 4

Pallet Racking High Density Variants 5

Notes on AS4084-2012 & Safety 7

Pallet Racking Gallery 8

GLOBAL CANTILEVER RACKING 9

Cantilever Light Duty 10

Cantilever Medium Duty 10

LONGSPAN SHELVING 11

Easypack Shelving 12

GLOBAL WORKBENCHES 13

Global Rack Workbenches 13

Longspan Workbenches 13

GALVANISED RIVET SHELVING 14

Rolled Upright Tight R.U.T 14

GONDOLA SHELVING 15

Shelving Gallery 16

RaIsed sToRaGe aReas

Raised Storage Areas Gallery 18

Ball and Stanchion Hand Rail 20

oFFIce sToRaGe

Cabinets 21

Lockers 22

PlasTIc & sToRaGe

Mobile Parts Trolley 23

Louvre Panels 23

Parts Bins for Louvre Panels 23

Stackable & Nestable Crates 24

Stackable Parts Bins 24

Parts Trays 24

maTeRIals haNdlING

Stackable Stillages 25

Stillage Mesh Cages 25

Galvanised Mesh Cage 25

Galvanised Pallet Wire Cages 26

Castor Wheels 26

Gravity Rollers 26

Pallet Jacks 27

Scissor Lift Tables 27

Manual Pallet Stacker 28

Container Ramps 28

co nte nt s

SELECTIVE PALLET RACKING is the most common type of pallet racking used in Australia. Pallets can be located and moved individually which provides rapid handling of varied goods types and beams can be adjusted to accommodate various pallet heights.

Global Rack is available in a wide range of sizes, loading capacities and hardware options, enabling it to be customised for your particular needs.

Pallet Racking Variations: We have a wide range of products to address your needs, regardless of the industry that you’re in. Here are a few of our primary products:

• Standard Pallet Racking: Our most popular system which allows for first-in, first-out inventory management.

• Drive-In Racking: This product is perfect for high density storage and first-in, last-out storage.

• Narrow Aisle Racking: Specifically designed for tighter spacing, narrow aisle forklifts and picking platforms.

• Cable Racking: If you have spools of cable that need to be stored, these racks provide the most efficient and convenient solution.

• Carpet Racking: This product was built for storing rolls of carpet, regardless of the length and weight.

• Tyre Racking: These racks were specifically designed to hold tyres and can be configured to store a wide range of tyre sizes.

• Accessories: We carry standoffs, row spacers, footplates, column guards, barrel supports, post caps, dynabolts, load signage, and much more.

PalleT RacKING

GlobAl RACk hAS beeN DeSIGNeD, eNGINeeReD AND TeSTeD IN AuSTRAlIA To The lATeST AuSTRAlIAN STANDARDS. IT ComPlIeS AND meeTS The followING STANDARDS.

• AS4084-2012 Steel racking standards and codes that have since been revised or superseded

• FEM 10.2.02 European code of practice for the design of static steel pallet racks

• AS1250-1985 SAA Steel structures code

• AS1538-1988 SAA Cold-form steel structures code

• SEMA-1980 (UK) Storage equipment manufacturers’ association of practice for the design and use of static pallet racking

• RMI-1985 (USA) Rack manufacturers’ institute specification of the design, testing and utilisation of industrial steel racks


r ac k i n g & s h e lv i n gr ac k i n g & s h e lv i n g

Beam Length Box Section Connector

1372mm 80 x 40mm 3 pin

1524mm 80 x4 0mm 3 pin

1829mm 80 x 40mm 3 pin

2133mm 80 x 40mm 3 pin

2438mm 80 x 40mm 3 pin

2591mm 80 x 40mm 3 pin

2591mm 100 x 50mm 3 pin

2591mm 120 x 50mm 4 pin

2591mm 150 x 50mm 4 pin

2743mm 80 x 40mm 3 pin

2743mm 100 x 50mm 3 pin

2743mm 120 x 50mm 4 pin

3048mm 110 x 50mm 3 pin

3350mm 120 x 50mm 4 pin

3658mm 130 x 50mm 4 pin

3810mm 130 x 50mm 4 pin

4267mm 150 x 50mm 4 pin

Beam Length Stepped Section Connector

1372mm 60 x 40mm 2 pin

2591mm 60 x 40mm 2 pin

2743mm 60 x 40mm 2 pin

FRAME And BEAM SIzES THAT ARE nOT lISTEd In THIS BROCHURE CAn BE ORdEREd On REqUEST.

PalleT RacKING

BOxED BEAm

Boxed beams have proven reliability and simplicity of use. Box section beams help resist the twisting effects experienced by I-beam styles. Our beams are available in our standard Orange Power coat or for extra rust protection in Hot dipped Galvanised.

Boxed beams come in a variety of lengths from 1372mm to 4267mm in standard stocked sizes. They also come in a variety of height profiles from 80mm to 150mm depending on the Udl capacity required for your system. Custom sizes are also available on request depending on your requirements. A list of standard stocked sizes is in the chart on this page.

All standard boxed beams use a simple punched key-lock design and quick placement spring locking clips.

STEPPED BEAm

Stepped beams are especially useful for low capacity storage or picking levels below pallet levels. Another common use is with our workbenches. Stepped beams come with an 18mm step to allow an 18mm board to sit flush with the beam level.

PALLET RACKING FRAmES

Our frames have been tested to be compliant to and exceed the requirements of AS4084:2012. A number of steel thickness and post profiles are available. Our frames use a high tensile steel to ensure that our standard frames can take higher capacities than traditional steel frames.

With stocked heights ranging from 1829mm to 7315mm and custom sizes available beyond this, we have you covered for your requirements.

Frames are stocked in Blue Powder coated and Hot dipped Galvanised finishes. Custom colours and sizes available upon request.

Frame Height Global Section Frame Width

915mm

90A

609 / 838 / 1219mm

1829mm 609 / 838 / 1219mm

2133mm 609 / 838 / 1219mm

2438mm 609 / 838 / 1219mm

3048mm 609 / 838 / 1219mm

3658mm 609 / 838 / 1219mm

4267mm 609 / 838 / 1219mm

4877mm90A / 90B

609 / 838 / 1219mm

6096mm 838 / 1219mm

6704mm 90B 838 / 1219mm

7315mm 90C / 10C / 12D 838 / 1219mm

Chipboard Shelves

Mesh Decks

PALLET RACKING SHELF mATERIALS

PalleT RacKING



THE GlOBAl ACCESSORy RAnGE IS THE IndUSTRy GO-TO WHEn IT COMES TO FITTInG OUT yOUR PAllET RACKInG.

FROM COlUMn GUARdS And OTHER SAFETy PROdUCTS THROUGH TO vERTICAl dIvIdInG ARMS, MESH dECKS And

BOARd SUPPORTS yOU WIll FInd WHAT yOU nEEd.

FTB Supports Coil Support Stand Off Brace Pallet Support Bars

Column GuardsZ ClipsFootplates & Shims End Wrap Barriers

Fork Entry Bars Corner Guards Vertical DividersRow Spacers

Splice KitsBeam ClipsPost Deflectors Safe Work Load Sign

NARROW AISLE RACKING

(Reach forklift Truck)

• A common type of High density Racking

• FIFO principle (First in, First Out)

• All pallets can be retrieved from the racking independently

• Pallet racking usually arranged into single and back-to-back runs

• Aisles only required to be wide enough for the forklift to drive into as stock is retrieved perpendicular to the direction of motion of the forklift. Each model of forklift will advise but often 3m-3.5m

• Common height between 3000mmH and up to 10000mmH

• Uses reach forklift truck as opposed to counterbalanced forklifts, check training and licensing requirements in your state

• More technically involved than traditional racking but can provide up to a 70% increase in storage against standard selective pallet racking depending on your space situation. Requires specialist forklift equipment and drivers as well as guidance method

DOuBLE DEEP RACKING

(Double Deep Reach forklift Truck)

• A less common type of High density Racking

• FIlO principle (First in, lAST out)

• Pallets cannot be removed independently however best used when 2 pallets deep of the same stock line

• Pallet racking arranged into double deep runs with guide rails above 4000mmH

• Aisles only required to be wide enough for double deep type reach truck to operate in as stock is retrieved perpendicular to the direction of motion of the forklift. Each model of forklift will advise required width but often 3m-3.5m

• Common heights between 3000mmH and up to 10000mmH depending on model of forklift.

• Uses specialised double deep reach forklift trucks

• More technically involved than traditional racking but can provide up to a 200% increase in storage against standard selective pallet racking depending on your space situation.

PalleT RacKING hIGh deNsITy VaRIaNTs



DRIVE IN RACKING

(Counterbalance forklift)

• A common type of very High density Racking

• (FIlO) First in last out principle

• Pallets must be retrieved only in the order they were entered into the racking therefore meaning best used for large pallet volumes of the same SKU.

• Arranged into cubic systems – X pallets wide, y pallets deep, z pallets high

• Uses specialist components

• Allows the use of common counterbalance forklifts

• Technically involved in the design process and minimal flexibility available after installation. It is designed for the purpose required.

SELECTIVE RACKING

(Counterbalance forklift)

• Most common type of pallet racking

• FIFO principle (First in, First out)

• All pallets can be retrieved from the racking independently

• Pallet racking usually arranged into single and back-to-back runs

• Aisles required to be wide enough forklift turning circle (commonly ~4-5m but varies model to model with the forklift)

• Common heights between 2400mmH and 7300mmH

• Uses normal counterbalanced forklifts

• Most flexible and common option for warehousing environments with highly flexible stock picking requirements

PalleT RacKING hIGh deNsITy VaRIaNTs NoTes oN as4084-2012 & saFeTy

Pallet Racking is now to be considered as a dynamic engineering system rather than a series of static components. It must be designed to suit the application to which it’s being used for. The key change is that dynamic forces acting on the rack are to be considered as well as static forces acting on the rack.

1. no changes to storage system configuration allowed without the approval of the equipment supplier or a structural engineer. This means that the load signage is only relevant to the design it was made for

2. The vertical clearance requirements for pallets stored above heights of 6m have been increased from 75mm to 100mm. This is aimed at reducing the risk of accidental impact with beam during pallet put-away and retrieval.

3. The “flue space” between pallets backing onto each other has been increased to 100mm, reducing the risk of an adjacent pallet being accidentally dislodged when storing or retrieving pallets and allows adequate penetration of water from roof and rack-mounted sprinklers during a fire.

4. A minimum of two ground anchors must be used per baseplate on racks where forklifts are used. The ground anchor is the M12x75mm dynabolt when in a suitable concrete floor. If not on a concrete floor (eg mine site road base or bitumen) then sufficient site preparation work must be done (eg. concrete footings or steel U-channel).

5. Minor changes to rack load signage whereby the dimension from ground to first beam level and from first to second beam level MUST be explicitly noted on signage - This means we now must use the load Sign 2012. - It must be mechanically attached 2m above the ground - Font must be at least 25mm high. This equates to a 72pt font.

6. Rack protection now has an explicitly stated minimum requirement. 400mm Corner Guards must be placed on the intersection of each gangway and cross-aisle. All other rack protection is at the discretion of the end-user however is recommended.

7. In general splices are to be avoided. If they are used then Splices MUST nOT be below the first level, MUST nOT be below 1.5m above ground level and nO MORE than one (1) splice between any adjacent beam level.

racking is damaged

Nominated management represented to assess and clarify the damage to racking and advise the health and Safety Representative.

Very serious damage requiring

immediate attention – ie damage to

frames in which the deflection of the post is greater

than 6mm over a 1000mm

length cantered on the damage

Immediately and safely off-load all affected bays of

racking and repair damage before

re-use

Restrict access to the area have authorised

personnel conduct the necessary repairs or replacement of all damaged parts are correctly carried out

Return to service

hazardous damageAmbeR

hazardous damage requiring action as soon as possible –

ie damage to frames in which the

deflection of the post is between

3mm and 6mm over a 1000mm length

centred on the damage

1. Identify damage for repair using dated amber tag

2. order materials3. ensure all

locations affected by damage are not reloaded.

4. make repairs as soon as possible

Repairs carried out

If repairs are not carried out within 4 weeks reclassify

as red risk

Return to service

Acceptable damageGReeN

Damage requiring surveillance – ie

damage to frames in which the deflection

of the post is less than 3mm over a 1000mm length centred on the

damage.

label damage component with

green tag and record date, and reassess at the next inspection,

nut put a plan in place to repair the damage within 12

months

If the severity of the damage has increased

If there is no change to the damage level continue to monitor at normal inspection levels and intervals

Continue in service

Very serious damage

ReD

6



PalleT RacKING GalleRy

CANTILEVER RACKING is primarily used for storing long, awkward and over sizes goods.

Cantilever Racking provides maximum storage capability and is easily accessible. It is also available in various heights with both single-sided and double-sided configurations.

Our Cantilever is available in light duty which has a safe working load (SWl) of 250kgs Udl per arm, medium duty has a SWl of 1000kgs Udl per arm, and heavy duty can be engineered to suit your SWl requirements. Udl is a uniformly distributed load.

Our Cantilever Racking is available in two finishes, powder-coated and hot-dipped galvanised. The powder-coated finish (blue and orange) is primarily used in warehouses and workshops. The hot-dipped galvanised finish is used for outdoor applications to protect the cantilever against rust.

Typical storage applications include:

• Plywood/Chipboard

• Timber

• Sheet Metal

• Tubing

• Pallets

• doors

• Furniture

• Structural members

• …and much more

Load Sign Removable End Stop Pins Arm Connector

caNTIleVeR RacKING



This racking system is similar to our heavy and medium duty options redesigned for lighter storage requirements. Each arm is designed to carry a maximum of 250kg uDl depending on the configuration.

This is a cost effective option for storing lighter product sets or low volume applications.

These medium duty cantilever solutions are able to store a variety of objects from building to construction materials. The arms are able to support up to 1,000kg uDl each depending on configuration.

Our medium duty racking system is available in a range of configurations with different heights, arm lengths, and varying distance between the posts to suit your requirements.

Post Heights (mm) 2000 2400 3000 3600

Arm Lengths (mm) 700 900 1200

Bracing (mm) 900 1200 1500

Post Heights (mm) 3658 4267 4877 6096

Arm Lengths (mm) 900 1200 1500

Bracing (mm) 900 1200 1500 1800 2100

lIGhT duTy caNTIleVeR

medIum duTy caNTIleVeR

LONGSPAN SHELVING provides an inexpensive storage solution which is ideal for a multitude of applications including: Box Storage, Archive Shelving, Storerooms, Workshops, Workbenches and many more. All perfectly suited for industrial, commercial or domestic purposes.

longspan Shelving is very easy to assemble and provides a quick and economical way to transform your storage area. Our frames come pre-assembled to make erection fast and simple. Our step beams allow a flush fitting of either chipboard, mesh decks or metal shelves. Chipboard and mesh decks are most commonly used for general applications, while metal shelves are used for grocery applications, so spillages can be easily wiped clean.

Our longspan is electrostatically powder-coated for a smooth and durable finish. Corporate colours are available on request.

loNGsPaN shelVING



The EASyPACK LONGSPAN shelving unit comes as pre-packed starter bays and add-on bays with 4 adjustable galvanised mesh levels.

The Easypack is an easy to assemble shelving unit, which are perfect for the home, commercial or industrial application. Each unit is powder coated in a rippled black finish.

Each beam locks in with a simple boltless system and frames are pre-welded so that you need only stand the frames up and clip the beams into position.

The galvanised mesh levels are made from a 50mm x 50mm mesh sitting on front-to-back (FTB) supports.

For those that wish there are pre-punched holes in the welded foot pate to anchor to the floor.

Beam Length (mm) 900 1200 1500 1800 2100 2400

External Bay Length (mm) 1020 1320 1620 1920 2220 2520

Loading Per Level (kg) 700 600 490 400 300 250

Frame Heights (mm) 1000 2000 2400 3000

Bay Depths (mm) 460 605 900

Chipboard Shelf Metal Shelf Mesh Deck

Mesh Deck

Part Number SL0003 SL0004

Model Starter Bay Add-On Bay

Bay Length (mm) 1960L x 615D x 1830H

Shelf Loading (kg) 400kgs

Shelf Material 50 x 50mm Galvanised Mesh

loNGsPaN shelVING

easy PacK loNGsPaN shelVING

2-Tier Global Rack Workbench Standard Bench Length (mm)

1372 / 2591 / 2743(Other sizes available. See page 3)

Bench External Length (mm) 2920

Bench Length Available in a wide range of lengths. Ask in store.

Bench Height (mm) 920

Depth (mm) 609 & 838

4-Tier Global Rack Workbench Standard Bench Length (mm)

1372 / 2591 / 2743(Other sizes available. See page 3)

Bench External Length (mm) 2920

Bench Length Available in a wide range of lengths. Ask in store.


Overall Height (mm) 1825

Depth (mm) 838 deep with 415 top shelves

2-Tier Longspan Workbench Bench Length (mm) 900 1200 1500 1800 2100 2400Bench External Length (mm) 1020 1320 1620 1920 2220 2520


Depth (mm) 460, 600, & 900

4-Tier Longspan WorkbenchBench Length (mm) 900 1200 1500 1800 2100 2400Bench External Length (mm) 1020 1320 1620 1920 2220 2520


Overall Height (mm) 2000

Depth (mm) 910 deep with 460 top shelves

Global RacK woRKbeNch

loNGsPaN woRKbeNch



GALVANISED RIVET SHELVING is ideal for box storage, archive shelving, storerooms, warehouses and any other industrial, commercial or domestic use. All components have an electro-galvanised coating to protect the system from corrosion that makes it an ideal system for use in cool rooms when paired with mesh decks, as well as for any general light duty storage.

We offer a wide range of heights, depths and bay lengths to accommodate almost any layout. Adjustable feet make it easy to level the shelving where the floor surface is uneven.

The step beam allows a flush fitting of 18mm particle board. Board supports may be used to tie the front and back z-beams together strengthening the shelving unit.

Bay Lengths (mm) 910 1210 1510 1810 2110 2410UDL Loading (kg) 270 250 220 200 180 150Post Heights (mm) 1334 / 1829 / 2134 / 2438

Bay Depths (mm) 430 / 570

Bay Height (mm) 2175Bay Depths (mm) 300 400 600Bay Width (mm) 900 / 1200

RuT SHELVING also known as Rolled Upright Tight Shelving is a simple steel shelving system consisting of modular bays. Each bay consists of a shell with adjustable shelves. Each shelf will hold 80kg Udl and you may have as many or as few adjustable shelves as you require.

This flexibility makes RUT shelving popular across a large range of industries and applications range from archiving through to small object storage. High densities can be achieved for small items by adding extra shelves and using parts trays or parts bins to keep your objects stored by type.

Our RUT Shelving is available in both single entry and double entry options.

GalVaNIsed RIVeT shelVING

Rolled uPRIGhT TIGhT R.u.T

Heights (mm) 1500 1800 2100 2400(Extension)

Bay Widths (mm) 900

Raised Shelf Depths (mm) 350 / 400 / 450

Base Shelf Depth (mm) 450

Configurations Single Sided | Double Sided | Internal Corner

Single Prong Goose Neck HookWire Basket and Divider

Wire DividerScan Hook

GONDOLA SHELVING is widely used in a number of retail businesses such as grocery stores, supermarkets, chemists, hardware stores, discount stores, and convenience stores etc. This type of shelf is available with many different hardware accessories e.g. wire fronts, wire dividers, wire baskets and dividers, scanning hooks, straight hooks, square tube hooks, goose neck hooks, data strips, 300mm extensions which allow a variety of applications.

Our Gondola shelving unit is available in 4 heights, 1500mm, 1800mm, 2100mm and 2400mm. The shelves are fabricated with 0.8mm steel and the panels are fabricated with 1.0mm steel. The gondola shelves are white powder coated and come with options of single and double sided racks. Internal corner bays are also available with a bay width of 790mm across the back. Shelves are rated to a maximum of 45kg Udl.

Our Gondola’s characteristics comprise quality, strength and durability. All shelves are fabricated using 0.8mm steel and 1mm steel is used for the punched panels. Our Gondola is electrostatically powder coated for a smooth and durable finish.

GoNdola shelVING


r a i s e d s to r ag e a re a s

16

r ac k i n g & s h e lv i n g

shelVING GalleRy

RAISED STORAGE AREAS are a cost effective method of doubling your existing floor space. our Raised Storage Areas are custom made and tailored to your specific layout needs. our Raised Storage Areas come in two different styles making it even easier for us to service your requirements.

Every raised floor is designed with structural staircases, safety railing and access gates, and complies with Australian Standards.

Whichever raised storage area you are looking for, we can customise it specifically so it meets your budget, time frame and layout requirements.

1. Structural RSAs are designed to Australian Standards, can be customised to specifically to your requirements and due to them being sourced offshore, can be an economical option. We stock modular components in our warehouse meaning that generally lead times are shorter than for traditional RSA systems. These modular components including structural beams and staircases.

2. Pallet Racking RSAs use our Global Rack which allows shelving levels to be easily added or removed within the RSA structure and has also been tested to Australian Standards

RaIsed sToRaGe aReas



r a i s e d s to r ag e a re a sr a i s e d s to r ag e a re a s

WHAT WE NEED TO KNOW TO BE ABLE TO DESIGN yOuR GLOBAL RAISED STORAGE AREA.

length, depth and height

Access gates

Position of staircases

loading requirements

Surface Treatment

Time in which RSA is required

Floor Material requirements

Other special requirements

RaIsed sToRaGe aReas GalleRy RaIsed sToRaGe aReas GalleRy


o f f i c e s to r ag e

20


BALL AND STANCHION HAND RAIL is an industrial grade hot-dipped Galvanised hand rail used for mezzanine floors or walkway barriers.

Standing 1057mm high and complete with a range of hand rails, knee rails and kick plates our Hand rail can be customised to any job.

Stanchions come in options for ends, corners and through posts as well as a 36 degree staircase option.

Help keep your team safe and contact us today.

Stanchion Height (mm) 1057High to Centre of Hand Rail (mm) 1020Height to Centre of Knee Rail (mm) 560Hand Rail Size (mm) 42.3Knee Rail Size (mm) 33.7Surface Treatment 6x100Stanchion Attachment Method Hot-dipped galvanisedStanchion Attachment Method M16 bolts

ball aNd sTaNchIoN haNd RaIl

Key Lockable Adjustable Shelves

Model SOC045 SOC047Type 2 door cabinet Mesh door optionBay Length (mm) 900W x 450D x 1850HNumber of shelves 4 adjustable 5 adjustableFinish Powder Coated Grey Powder Coated Grey and YellowCapacity (kg) 120kg UDL per shelfFlat Pack Flat Packed – Additional charge for assemblyLock Lock inbuilt into door and supplied with unique key

Key Lockable Adjustable Shelves


cabINeTs


P l a s t i c s & s to r ag e

22


Model SOC010 SOC011 SOC012Number of Doors 1 2 4Door Height (mm) 1725 860 430External Depth (mm) 457

External Length (mm) 380

External Height (mm) 1830

LOCKERS provide a secure personal storage solution for your work team.

These units are quick and easy to assemble, designed to use a padlock to secure each locker.

Each locker is vented to minimise the build-up of odours.

Model SOC013 SOC014 SOC015Number of Doors 3 6 12Door Height (mm) 1730 x 250 850 x 250 415 x 250External Depth (mm) 450

External Length (mm) 1145

External Height (mm) 1830

locKeRs

Colour Size (mm) ModelGrey 105W x 110D x 52H SO0201Yellow 105W x 140D x 52H SO0202

Green 105W x 190D x 75H SO0203Blue 140W x 220D x 125H SO0204Red 140W x 270d x 125H SO0205

Rolled-Type Louvered Panel Flat-Type Louvered Panel

Width (mm) 900 455

Height (mm) 400 455 / 610 / 914

Wall Mountable 3 3

The mOBILE PARTS TROLLEy is a double-sided unit set on lockable castors. It is ideal for storing and organising small parts such as nuts, bolts, fittings and other hardware that may be used in mechanical, engineering, plumbing or electrical workshops, shed and general warehouses.

The Mobile parts bin trolley is also a great solution for your workstation feeder bin requirements.

The mobile trolley is commonly sold as a unit with 116 bins spread across five sizes – 16 Grey, 32 yellow, 32 Green, 12 Blue and 24 Red (pictured)

Dimensions (mm) 1585H x 970W x 600DHandles 2Fixed Castors 2Swivel Castors 2Qty of Bins(See Parts Bins Section) Various – Personal Preference

louVeRed PaNels

PaRTs bINs FoR louVeRed PaNels


mobIle PaRTs TRolley


m ate r i als h a n d l i n g

24


Model Size (mm)

SOBA2 300L x 200D x 148H

SOBB2 400L x 300D x 148H

SOBC2 400L x 300D x 280HSOBD2 600L x 400D x 280HSOBF2 600L x 400D x 220H

SOBH2 600L x 400D x 148H

SOBJ2 400L x 300D x 220HSOB6141 610L x 410D x 320H

Colour BlueSize (mm)and Model

214L x 370D x 175H SO0308

420L x 370D x 175H SO0310

Label Protector 3

Side Locking 3

Dividers 3 (SO0320)

Hangable 3

Stackable With and Without Pins

Colour BlueSize (mm)andModel

117W x 400D x 90H SO04109

234W x 400D x 90H SO04209234W x 400D x

140H SO04214

117W x 600D x 90H SO06109

234W x 600D x 90H SO06209234W x 600D x

140H SO06214

Label Protector 3

Dividers 117W x 90H 234W x 90H 234W x

140HStopper Handle

3

Stacking Pins

Dividers

Stopper Handle

The STACKABLE CRATE range is a fantastic method of securely storing your goods whilst minimising dust build up. Each bin has a lid with interlocking “fingers” to ensure a good seal. Made from hardwearing plastic the Stackable crate range will keep your goods secure and safe. All bins come with two padlock points for added security

sTacKable & NesTable cRaTes

sTacKable PaRTs bINs

PaRTs TRays

CollapsibleDual Directional Bracing

Model MH0100External Dimension (mm) 1200H x 1430W x 1060DInternal Dimension (mm) 1010H x 1320W x 950DLoad Capacity (kg) 1000Finish Hot-Dipped GalvanisedCollapsible 3

Safe Stacking Height 3

Self-Centring When Stacked 3

Forklift Access 2-way bracing allows access from 2 directions

Model MH0130Dimension (mm) 1200W x 1000D x 930HFolded Height (mm) 300Load Capacity (kg) 1000

Finish Powder-coated Frame & Electro Galvanised Mesh Sides

Collapsible 3


Construction Heavy Duty with Solid Base

Best Suited To Standard 838/840D Racking

Model MH0121Dimension (mm) 1200W x 1000D x 890H / 450HFolded Height (mm) 333Load Capacity (kg) 1000Collapsible 4


Construction 100 x 50 – 6mm Mesh

Rackable Includes Support Bars

sTIllaGe mesh caGes

GalVaNIsed mesh caGes


sTacKable sTIllaGes


m ate r i als h a n d l i n gm ate r i als h a n d l i n g

Conveyer Length (mm) 1500 & 3000Roller Size (mm) 400 & 600Pitch (mm) 75 to 300Weight Loading 50kg per rollerBearings SteelRoller Steel Galvanised RollersFrame Blue Powder CoatedAdjustable Stands (mm) 600 to 900 High

Adjustable Stands

Mounting Type M12 Single Thread Bolt

M8 Four Bolt Fixed

M8 Four Bolt Swivel

M10 Four Bolt Swivel

Model MH0050 MH0052 MH0051 MH0055Wheel Load Rating 120kg 120kg 120kg 360kg

Wheel Material Polyurethane

Wheel Colour Blue RedDiameter of Wheel 100 mm 125 mmWidth of Wheel 30 mm 50 mmWheel Lock 3

N/A N/A 3 3

Frame Finish Galvanised

Model MH0115 MH0116Dimension (mm) 1170L x 1170D x 800H 1170L x 1170D x 400HCollapsible 3

Construction 100 x 50 – 6mm MeshPallet Attachment 6x Lugs

GalVaNIsed PalleT wIRe caGes

casToR wheels

GRaVITy RolleRs

Pallet Entry Rollers

Handle

Pallet Type Standard NarrowFork Distance In/Out (mm) 365/685 230/550Lifting Capacity (kg) 2500Lifting Height (mm) 200 to top of tineOperation Raise/Neutral/Lower LeverPallet Entry Roller 4

SINGLE SCISSOR Model MHA150 MHA500Table Size (mm) 740 x 450 x 35 855 x 500 x 50Rated Capacity (kg) 150 500Max Lifting Height (mm) 740 900Min Lifting Height (mm) 225 340

DOUBLE SCISSOR

Model MHB800Table Size (mm) 1220 x 610 x 60Rated Capacity (kg) 800Max Lifting Height (mm) 1500Min Lifting Height (mm) 475

PalleT JacKs

scIssoR lIFT Tables

28


mANuAL PALLET STACKER, a simple alternative for your materials handling needs. The Pallet Stacker allows a small business to overcome these basic challenges. Each unit comes with both a standard pallet jack handle as well as an additional foot pump to easily lift the pallet. Great for the small retail or workshop environment. Save time, money and your back with this great solution.

GLOBAL CONTAINER RAmP with 6,500kg uDl capacity. Comes with a fold out design to minimise storage space. Powder coated steel construction for added strength and durability. The container ramp is yellow for maximum visibility to help prevent accidents and trip hazards.

Model MHSJDAS1000Load Capacity (kg) 1000Max Lift Height (mm) 1600Overall Length (mm) 1300 / 1560Overall Width (mm) 1450Fork Dimensions (mm) 30 / 100 / 800Turning Radius (mm) 1200Width Overall Forks (mm) 950

Model MH0250Ramp Capacity (kg) 6500Dimensions (mm) 2200 x 2000Weight (kg) 275Colour Yellow

maNual PalleT sTacKeR

coNTaINeR RamPs

n ote s

www. macleodhouse .c ommacleodhouse.com.au › files › 16 › catalogues › 2 › storage... ·...

Documents