written by: diego fabiano · step 9 — plastic casing remove seven 5 mm phillips #1 pan head...
TRANSCRIPT
![Page 1: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/1.jpg)
Sony Vaio PCG-4G1L Hard Drive ReplacementA demonstration on how to remove and replace the Hard Drive for the Sony Vaio PCG-4G1L
device.
Written By: Diego Fabiano
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 10
![Page 2: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/2.jpg)
INTRODUCTION
Common reasons for removing the Hard Drive could be exposure to power surges or magnets,device crashes, blue screens. error messages while moving files, or losing files without notice.
In this guide, you will learn how to replace the Hard Drive of your device. Please remember to unplugthe charging cable, since it could result in electric shock.
TOOLS:64 Bit Driver Kit (1)Tweezers (1)iFixit Opening Tools (1)
PARTS:1 TB SSD / Upgrade Bundle (1)250 GB SSD / Upgrade Bundle (1)500 GB SSD / Upgrade Bundle (1)2 TB SSD / Upgrade Bundle (1)
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 10
![Page 3: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/3.jpg)
Step 1 — Battery
Turn off the computer anddisconnect the charging cable.
Failing to unplug the cable can resultin electric shock.
Step 2
Slide battery release toggle switch towards the "RELEASE" print.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 10
![Page 4: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/4.jpg)
Step 3
Apply pressure with your thumb on the grip.
Pull the battery out while simultaneously holding the battery release toggle switch in the releaseposition.
Step 4 — Keyboard
Remove one 5 mm Phillips #1 pan head screw, in the middle of the laptop, using a Bit Driver withPhillips PH1 bit.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 10
![Page 5: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/5.jpg)
Step 5
Be sure to pry the plastic opening tool under the keyboard, rather than under the keys. Otherwise,some keys could get harmed.
While using a plastic opening tool, carefully lift the keyboard by inserting the tool under the edge.
Step 6
Do not pull the keyboard too far away, as a ribbon cable is still attached. Failing to do so cancause damage to the ribbon cable or the connector.
Use the plastic opening tool to release the clamp.
Using slight pressure, remove the ribbon cable with your fingers.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 10
![Page 6: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/6.jpg)
Step 7 — Network Antenna
Swivel the Network Antenna up sothat it points upward.
Step 8
Pinch thumb and index finger at the Network Antenna's base.
Make sure not to bend the Network Antenna. Failing to do so can cause damage to the antenna.
Pull the Network Antenna off.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 10
![Page 7: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/7.jpg)
Step 9 — Plastic Casing
Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit.
Step 10
Remove one 7 mm Phillips #1 Pan Head Screw by using a Bit Driver with Phillips PH1 bit.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 10
![Page 8: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/8.jpg)
Step 11
Disconnect the cable by using the precision tweezers.
Slowly pry out the ribbon cable by using the plastic opening tool.
Step 12
Do not pull the plastic cover too faraway, as a ribbon cable is stillattached. Failing to do so can causedamage to ribbon cable or theconnector.
Remove the plastic cover byinserting the plastic opening toolaround the edge.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 10
![Page 9: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/9.jpg)
Step 13
Disconnect the ribbon cable by pulling straight up with your fingers.
Step 14 — Hard Drive
Remove three 5 mm Phillips #0 flat head screws using a Bit Driver with a Phillips PH000 bit.
Remove the bracket with your fingers.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 9 of 10
![Page 10: Written By: Diego Fabiano · Step 9 — Plastic Casing Remove seven 5 mm Phillips #1 pan head screws with a Bit Driver, using a Phillips PH1 bit. Step 10 Remove one 7 mm Phillips](https://reader033.vdocuments.site/reader033/viewer/2022050308/5f70db526ee0413b56648616/html5/thumbnails/10.jpg)
To reassemble your device, follow these instructions in reverse order.
Step 15
Using the plastic opening tool, pry out the side of the hard drive.
The hard drive should easily disconnect from the connector.
Slide the hard drive out, towards the left side of the case, while your fingers apply pressure to theribbon cable.
Sony Vaio PCG-4G1L Hard Drive Replace… Draft: 2020-01-22Guide ID: 73879 -
This document was generated on 2020-01-30 04:39:33 AM (MST).
© iFixit — CC BY-NC-SA www.iFixit.com Page 10 of 10