workshop catalogue - motoral_prolift_2015.pdf · 8 hydraulic bottle jacks > model: 102500 -...
TRANSCRIPT
WORKSHOP CATALOGUEEngineered to last
SHINN FU EUROPE B.V.www.shinnfu.com
2
WARRANTY CoNdiTioNs For oMEGA and PRo LiFT BRANd LiFT EQUiPMENTAll Shinn Fu products are carefully supervised throughout the manufacturing process. Before sending the products to the cus-tomers, every article is checked for material and manufacturing defects. The high quality and reliability of our products is what characterizes our brands.
Shinn Fu’s products are warranted against defects in material and workmanship for a period of two (2) years for both OMEGA and PRO LIFT (from the date of purchase).
Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair, replace or credit (at its option) the product without charge.
Warranty assessment: In case of defective articles the customers have to contact a Shinn Fu Europe B.V dealer for further instructions.
WARRANTY CoNdiTioNs For oMEGA-MECHANiX brand productsShinn Fu’s products are warranted (for the expected life of the products) against defects in material and workmanship.
Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair or replace (at its option) the product without charge.
disclaimers and Limitations:This LIMITED WARRANTY does not extend to products manufactured by SHINN FU that in its sole judgment were improperly used, altered, abused or repaired by others.
• Ten (10) years limited warranty for OMEGA-MECHANIX hand tools with exception of shank bits, bit sockets, ratchet handles, torque-sockets, torque-wrenches, air impact wrench and electrical impact wrench.
• Two (2) years limited warranty for OMEGA-MECHANIX ratchet handles, torque-sockets, torque-wrenches and air impact wrenches.
• One (1) year limited warranty on all OMEGA-MECHANIX products that are equipped with a battery or 230V power lead.• No warranty on shank bits and socket bits, or wear items like creeper wheels.
Shinn Fu is not liable for incidental or consequential costs or losses incurred by product purchaser or user.
Warranty Assessment: In case of defective articles the customers have to contact their Shinn Fu Europe B.V dealer for further instructions.The product price is in consideration of limiting Shinn Fu’s liability for products manufactured or distributed.
WARNiNG!Familiarize yourself carefully with these products before using. Know the hazards associated with their improper use. Never use these products for any purpose other than for which they are specifically intended.
3
SHINN FU Under the direction and leadership of the founder Mr. Michael Hung, and the hard work and devotion of their employ-ees, Shinn Fu Group has firmly established itself as a world leader in the automotive and hydraulic industry. Shinn Fu Corporation was founded by Mr. Michael Hung in 1971 (based Chia-yi, Taiwan). Shinn Fu’s vision is one of continu-ous growth and prosperity. Their goal is to generate strong growth and new levels of achievement, and to continue to make the company even more customer-focused, responsive, efficient and innovative. The insistence of producing and offering only the highest quality products has earned Shinn Fu Group a reputation for excep-tional quality in the automotive lifting equipment, hydraulic equipment, and automotive accessories with strong brands in the professional market and invaluable recognition for reliability in the DIY market. The quality of Shinn Fu's products is recognized not only by customers worldwide, but also by international governments and industry agencies including the American National Standards Institute (ANSI), Australian Standards (AS). European Conformity (CE), Germany's Technical Inspection Association (TUV), and Japanese Industrial Standards (JIS). Every Shinn Fu product is specifically designed and engineered to not only meets, but to exceed the industry standards set forth by these organizations.
Shinn Fu’s commitment to quality permeates all aspects of the organization, and it is aggressively assimilating the Interna-tional Quality Assurance System into its production fold. Currently Shinn Fu has three plants that are ISO9001, ISO14000 and QS9000 compliant, and a mechanical jack manufacturing plant that conforms to rigorous automotive industry Quality Assur-ance (QA) standards. All other facilities in the Shinn Fu Group have initiated programs to reach compliance in the near future in order to progress toward Shinn Fu's goal of total quality system compliance. Shinn Fu is committed to continuous upgrades all of its facilities to ensure that they remain state-of-the-art.
Shinn Fu possesses a valuable, substantial and global patent portfolio that covers many important inventions in hydraulics, lifting, and automotive accessories. Shinn Fu is also devoted to supplying safe user-friendly product lines.
In order to provide our customers with excellent after-sales service, Shinn Fu has established worldwide branch offices in the USA, Canada, Australia, Hong Kong, Japan and Europe. This global presence facilitates the establishment of strong customer relationships and allows Shinn Fu to provide more effective customer assistance. Shinn Fu Europe B.V. (SFE) was established in 1994 in The Netherlands. With the objective of promoting and distributing Shinn Fu's products in the markets of Europe, Middle East and Northern Africa, SFE launched the Omega Lifting Equipment program beginning in 1994. Since then, Omega has won the market's recognition.SFE maintains the following divisions:• BVA Hydraulics™• Omega Lift Equipment®• Omega Mechanix• Pro-Lift®
Thanks to our customers' trust and support in the past years. SFE is definitely encouraged to devote time and effort to the continuation of efficiently distributing high quality and innovative products to our customers throughout the region.
Pro
fess
iona
l lift
ing
equi
pmen
t
5
Index
Hydraulic bottle jacks Page 8
Specifications Page 9
Hydraulic service jacks Page 10 - 12
High lift Page 13
Specifications Page 14 - 15
Hydraulic service jacks Page 16 - 17
Specifications Page 18
Air actuated axle jacks Page 19 - 23
Specifications Page 24 - 25
Jack stands Page 26
Axle stands & high stands Page 27
Specifications Page 28
Hydraulic pit jack Page 29
Transmission jacks Page 30 - 31
Specifications Page 32
Engine cranes Page 33 - 34
Specifications Page 35
Engine stands & supports + specs Page 36 - 37
Presses + specs. Page 38 - 39
Bench & shop presses + specs. Page 40 - 41
Body repair kits Page 42
Wheel arm & pipe bender Page 43
Tyre handling equipment Page 44
Specifications Page 45
Pumps & cylinders + specs. Page 46 - 47
6
5. Gear Type
Traditional and proven transmission.
2. Saddle pad
Patented airvented soft saddle pad prevents vehicle’s chassis against scratching.
3.3. Full cover Saddle pad
Patented airvented soft saddle pad prevents vehicle’s chassis against scratching.
1. Soft Handle Foam
Soft Foam for extra protection. Prevents handle from accidentally damaging the car.
6. Air Vent Valve or Oil Filler Plug
Exclusive designed breather plug automati-cally eliminates air in the hydraulic system, optimizing jack's performance.
4. Universal Joint Mechanism
Universal joint release mechanism provides precision control of load descent in any handle position.
Magic Lift
• Magic Lift for fast and time-saving operation.• Reaches the lifting point with only one stroke.
7
9. Metal Wheels
Metal wheels, long lasting and strong.
Handle Handle Handle Handle Handle
Round-Shape handle T-Shape handle With Air Return With Air Return
MetalNylonPU
8. Nylon Wheels
Nylon wheels for easy and silent moving prevent damage to oil tight garage floors.
7. PU-Wheels
PU-Wheels for easy and silent moving prevent damage to oil tight garage floors.
1. 2. 3. 4. 5. 6. 7. 8. 9.
General Features
8
Hydraulic bottle jacks >Model: 1102500 - 1104500 - 1106500 - 1108500 - 1112500 - 1112900
1120500 - 1120900 - 10300 - 10500 -10990
Air-actuated bottle jacks >Model: 18202C - 17302C
• With easy adjustable extension screw [2-20 Ton].• With rubber removable carry ring for easy storage of
pump handle [2-20 Ton].• Safety valve against over-loading.• Bottle Jacks 8 Ton and more are supplied with a
carry grip.
< Telescopic bottle jacksModel: 1202100 - 1204100
• Telescopic ram plunger combines a compact construction with a long hydraulic stroke.
• 8 - 12 BAR suggested air-pressure for optimal performance.
Hydraulic bottle jacksHeavy duty
9
D
C
A
B
E
W
FL
D
C2
C1C
B
A
E
W
LF
1202100 1204100 18202C 17302C2 ton 4 ton 20 ton 30 ton
ModelCapacity
A (mm)B (mm)C (mm)
C1 (mm)C2 (mm)D (mm)E (mm)F (mm)L (mm)
W (mm)N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
170375205103102
-345281101224
246
0.0314554
17341820110410635
44532
1301205.4
23.14
0.0242980
247477130
--
10060048
21618417.017.9
10.0171005
280458180
---
9656226021027.528.5
10.031632
Heavy duty - Telescopic
1102500 1104500 1106500 1108500 1112500 1112900 1120500 1120900 10300 10500 10990
2 ton 4 ton 6 ton 8 ton 12 ton 12 ton 20 ton 20 ton 30 ton 50 ton 100 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)L (mm)
W (mm)N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1843491105534025100983.0
12.84
0.0135600
20839312560
44827
1091004.0
17.34
0.0193900
22143413380
448311181055.0
21.94
0.0193300
23145115070
46034
1201226.2
24.94
0.0252900
24047015080
46043
1401308.033.5
40.0292100
1572747740
46043
1641546.3
26.04
0.0292668
24447415080
46052
13813012.526.1
20.0201300
1692867740
46052
1641509.6
20.52
0.0141766
280460180
-97062
20717424.325.5
10.018705
305483178
-59379
27519850.454.9
10.034328
305461156
-60011330523890.697.2
10.044185
Heavy duty
Heavy Duty - Air Actuated
Specifications
10
Hydraulic Service JacksGear Type
2902401 >
Capacity: 2.25 TonMax: 495mm
Min: 135mm
PU
PU
< 2103001
Capacity: 3 TonMax: 494mm
Min: 140mm
Equipped with traditional handle and convenient foot pedal.
2903501 >
Capacity: 3.2 TonMax: 504mm
Min: 145mm
Extra wide wheels and solid stance designed for stability under load stress.
PU
31,5KG
11
Hydraulic Service JacksUniversal joint
< 2602701
Capacity: 2.7 TonMax: 485mm
Min: 103mm
Full aluminum jack
2903001 >
Capacity: 3 TonMax: 508mm
Min: 95mm
Universal joint mechanism
< 2903701
Capacity: 3.2 TonMax: 558mm
Min: 140mm
Universal joint mechanism
2702701 >
Capacity: 2.7 TonMax: 480mm
Min: 100mm
Aluminum frame with steel lifting arm
PU
PU
PU
PU26KG
31KG
12
Hydraulic service jacksLow profile universal joint
2902301 >Only 63mm high / Extra long reach
Capacity: 2 TonMax: 508mm
Min: 63mm
2902501 >High lifting range 63 - 500mm
Capacity: 2.25 TonMax: 500mm
Min: 63mm
PU
PU
PU
2102701 >Long reach
Capacity: 2 TonMax: 375mm
Min: 80mm
Length 600mm
Length 710mm
13
High liftuniversal joint
2501503 >T-Shape handle
Capacity: 1.5 / 2 TonMax: 815mm
Min: 100mm
Nylon
< 28045Forklift jack
Capacity: 4 TonMax: 435mm
Min: 55mm
Capacity: 5 TonMax: 765mm
Min: 430mm
• Dual lift points for servicing forklift trucks, vehicles or machinery with low or high ground clearance.
Optional 32075
capacity: 7 Ton
4 Ton
5 Ton
2502303 >T-Shape handle
T-Shape Handle
14
2902401 2602701 2702701 2103001 2903501 2903701
2 ton 2.7 ton 2.7 ton 3 ton 3.2 ton 3.2 tonModel
Capacity
A (mm)B (mm)
Stroke C (mm)E (mm)F (mm)I (mm)J (mm)L (mm)
W (mm)H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
Soft Saddle-Pad
Universal Joint
Air vent valve or oil filter plug
Wheels
135495360
1070100764363633516531,533.0
10.043620
x
-
-
PU
103485382
12101006555
73033216026
2711
0.056500
x
-
-
PU
100480380
1210100655570533216031
32,61
0.053500
x
-
-
PU
140494354
10701259258
69734116037.639.0
10.064440
x
-
x
PU
145504359
10701257658
69033616037.238.5
10.062445
x
-
x
PU
14055841813201259243
75835116539.842.8
10.066420
x
x
x
PU
Hydraulic service jacks
Metal
A
F
I J
H
W
L
BC E
Specifications
15
2903001 2102701 2902301 2902501 2501503 /2502303 28045
3 ton 2 ton 2 ton 2.25 ton 1.5 Ton / 2 Ton 4 Ton
955084131243140925875533516041.243.4
10.060410
x
x
x
PU
80375295
13201257258
95534917044.348.5
10.094306
x
x
x
PU
63508445
13201256058
107834917552.554.9
10.107270
x
x
x
PU
63500437
13201256043
76234514539.541.5
10.064456
x
x
x
PU
100 / 100815 / 815715 / 715
1342 / 1054140 / 14092 / 9258 / 58
1029 / 1044385 / 392170 / 20452 / 66
56.5 / 73.11 / 1
0.090 / 0.125286 / 246
x
x
x
Nylon
55435430765750751005075525538.541.3
10.070348
-
-
-
Metal
Low profileservice jacks High lift Forklift
�
�
�
�
�
�
�
�
������
������
������
������
�
�
Specifications
16
Hydraulic service jacksLong chassis
2505700 >
Capacity: 5 TonMax: 565mm
Min: 165mm
Round-Shape Handle
< 2510700
Capacity: 10 TonMax: 686mm
Min: 175mm
Round-Shape Handle
Metal
Metal
17
Hydraulic service jacksLong chassis - air operated
22201 >
Capacity: 20 TonMax: 660mm
Min: 190mm
• 8-14 BAR suggested air-pressure for opti-mal performance.
• 3-Ways to operate: by air, manually and with foot pedal.
Metal
22101C >
Capacity: 10 TonMax: 686mm
Min: 178mm
Metal
T-Shape Handle
18
2505700 2510700 22201 22101C
5 ton 10 ton 20 ton 10 TonModel
Capacity
A (mm)B (mm)
Stroke (mm)E (mm)F (mm)I (mm)J (mm)L (mm)
W (mm)H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
Soft Saddle-Pad
Universal Joint
Air vent valve or oil filter plug
Wheels
165565400
106816711070
133842828185.591.5
10.144200
x
x
x
Metal
175686511
1215167130100
1309499245
130.0140.0
10.253
90
x
x
x
Metal
178686508
1069188150100
1390507324163
200.01
0.36860
x
x
x
Metal
190660470
1346155150100
1580517300220
259.11
0.46150
x
x
x
Metal
Hydraulic Service Jacks
Metal
A
F
I J
H
W
L
BC E
Specifications
19
23152 > Adaptors
75mm 45mm
Air actuated axle jacks• Compact low profile design.• Easy access between wheels of tandem axle trucks.• 8-12 BAR suggested air-pressure for optimal
performance.• Extension adaptors included.
Air actuated axle jacksTelescopic - Air Return
24KG
Capacity: 15 / 30 Ton Max with adaptor: 409mm
Max without adaptor: 289mm
Min: 150mm
20
< 231133 stage - low profile
Capacity: 11 / 23 / 45 TonMax with adaptor: 374,5mm
Max without adaptor: 254,5mm
Min: 120mm
With air return handle
Adaptors
75mm 45mm
Adaptors
120mm 75mm 45mm 30mm
Air actuated axle jacksTelescopic - Air return
23212 >2 stage
Capacity: 20 / 40 TonMax with adaptor: 559mm
Max without adaptor: 289mm
Min: 150mm
With air return handle
21
Adaptors
120mm 75mm 45mm 30mm
Adaptors
120mm 75mm 45mm 30mm
Air actuated axle jacksTelescopic - Air return
< 242133 stage
24113 >3 stage - low profile
Capacity: 20 / 40 / 60 TonMax with adaptor: 597mm
Max without adaptor: 327mm
Min: 150mm
With air return handle
Capacity: 10 / 20 / 40 TonMax with adaptor: 559mm
Max without adaptor: 289mm
Min: 130mm
With air return handle
22
23205 >
< 23211Model: 23211
23207 telescopic >
Adaptors
10mm 70mm 120mm
Adaptors
20mm 50mm 100mm
Air actuated axle jacksShort chassis
with air return
With extension
screw
With extension
screw
Capacity: 20 TonMax with adaptor: 541mm
Max without adaptor: 441mm
Min: 215mm
Capacity: 20 / 35 TonMax with adaptor: 454mm
Max without adaptor: 334mm
Min: 186mm
Capacity: 20 TonMax with adaptor: 495mm
Max without adaptor: 395mm
Min: 260mm
With extension screw (see dimension D in table)
23
Adaptors
45mm 100mm
100mm 200mm
Air actuated axle jacksHigh tonnage
< High tonnage - Short chassisModel: 23301C - 23501 - 23991Capacity: 30 ton - 50 ton - 100 ton
• Compact, low profile design for maximum access, which fits easily and safely between wheels of tandem axle vehicle.
• User friendly, self-returning spring minimizes operator's effort, greatly reducing fatigue.
• An inline air filter traps contamination and protects air motor for longer life.
• 8-14 BAR suggested air pressure for optimal performance.
< Air actuated axle jacksModel: 24301 - 24601
24301Capacity: 30 TonMax with adaptor: 772mm
Max without adaptor: 627mm
Min: 360mm
24601Capacity: 60 TonMax with adaptor: 1031mm
Max without adaptor: 731mm
Min: 420mm
24
23152 23113 23212 24213 24113 24301/24601
15/30 ton 11/23/45 ton 20/40 ton 20/40/60 ton 10/20/40 ton 30 / 60 tonModel
Capacity
A (mm)B (mm)
Stroke C (mm)C1 (mm)C2 (mm)C3 (mm)D (mm)E (mm)F (mm)L (mm)
W (mm)H (mm)
Adaptor 1 (mm)Adaptor 2 (mm)Adaptor 3 (mm)Adaptor 4 (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1502891397366-
17670654902905007545--
24301
0.065420
120254,5134524240
19255
1255202941430
7545--
36421
0.11260
1502891397366N/A18670160480290143012075453047511
0.11254
15032717757596121570150875295
151012075453076811
0.17175
130289159574953
17970
125830295151012075453050561
0.17175
360 / 420627 / 731267 / 311
---
215 / 29570 / 90
200 / 200840 / 910282 / 362
1380 / 1380100 / 20045 / 100
--
87 / 126101 / 143
1 / 10.139 / 0.18
145 / 118
Telescopic - air return
H
F
A
C
L
B
E
WD
C1
C2
C3
Specifications
25
23205 23211 23207 23301C 23501 23991
20 Ton 20 Ton 20/35 Ton 30 Ton 50 Ton 100 TonModel
Capacity
A (mm)B (mm)
A-B (mm) Stroke C (mm)
D (mm)E (mm)F (mm)L (mm)
W (mm)H (mm)
Adaptor 1 (mm)Adaptor 2 (mm)Adaptor 3 (mm)Adaptor 4 (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
26049523513510071200547315
1229----
33.435.4
10.091290
2154412261418543165525265
12401005020-
30351
0.083320
186334148148
-70
204549351
12291207010-
49.553.2
10.083325
280458
-178
-62
2005473171229
----
43.545.6
10.081255
305483
-178
-79
204549351
1229----
72.383.0
10.119216
305461
-156
-113254586416
1258----
112.5123.3
10.139145
Short Chassis High Tonnage - Short Chassis
B
A
L
C
D
E
F
W
H
Specifications
26
Jack standsTubing & Ratchet
< Jack stands ratchetModel: 3203500 | 3 Ton | Max 432mm / Min 292mm
3206500 | 6 Ton | Max 618mm / Min 390mm
3212500 | 12 Ton | Max 700mm / Min 445mm
• One piece, FCD-40 ductile iron ratchet bar provides super strength and durability.
• Quick adjustment ratchet mechanism.
Sold and to be used only in pairs!
Jack stands tubing >Model: 3203100 | 3 Ton | Max 433mm / Min 290mm
3206100 | 6 Ton | Max 565mm / Min 365mm
3212100 | 12 Ton | Max 750mm / Min 485mm
3220100 | 20 Ton | Max 923mm / Min 568mm
• Adjustable in various heights.• Chained lock pin to secure ratchet column.
Sold and to be used only in pairs!
3 & 6 Ton with rubber pad
27
Axle stands & High standsHeavy Duty
3207500 >Capacity: 7 Ton | Max 360mm / Min 238.5mm
• Special for forklift trucks.
Sold and to be used only in pairs!
< 3222500Capacity: 22 Ton | Max 505mm / Min 310mm
Sold and to be used only in pairs!
< 3210901Capacity: 10 Ton | Max 1194mm / Min 711mm
Sold and to be used only in pairs!
3203900 >Capacity: 3 Ton | Max 2000mm / Min 1300mm
Sold per piece!
with rubber pad
28
L
JIB
D C
AW
I
B
INT
ER
VAL
D
J
L
C
A
3203100 3206100 3212100 3220100 3203500 3206500 3212500
3 ton 6 ton 12 ton 20 ton 3 ton 6 ton 12 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)I (mm)J (mm)L (mm)
W (mm)N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
294437143296075121
-5.25.51
0.0201343
375575200408080339
-10.612.0
10.047600
481752265539090
389-
23.525.5
10.073336
568923355798090
524-
34.438.5
10.169172
292432140152790
1901706.06.41
0.0161760
390618228183111027023513.714.5
10.038708
4457002552337
12030727424.525.8
10.063415
Tubing Ratchet
L
FE
B
DC
A
3207500 3222500 3203900 3210901
7 ton 22 ton 3 ton 10 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
238.5360
121.5556490-
220--
9.611.1
10.0231152
310505195557080-
250--
27.828.8
10.034832
130020007005080110
-837
--
21.924.3
10.059429
71111944835080
125-
407--
50.054.2
10.228120
Heavy Duty
Specifications
29
Hydraulic pit jackMagic lift
< Pit jackModel: 46030 | 300kg | max 2105mm / min 1280mm
46060 | 600kg | max 2097mm / min 1267mm
46100 | 1000kg | max 2146mm / min 1316mm
• Magic lift hydraulic unit reaches the desired height twice as fast as traditional models without magic lift.
• By turning the saddle upside down, it can also be used as extra support.
Reversible
Saddleart. 21030-04
Saddle padart. 2903509100
Transmission Saddle41901 (optional for the 46100)
30
< 41000CModel: 41000C - Manual 41001 - Air OperatedCapacity: 500kg | max 2026mm / min 1016mm
• Effortless air operation will greatly reduce operator's fatigue and speed up the efficiency of garage work.
• 8-14 BAR suggested air pressure for optimal perfor-mance.
42001 >Single stage air operatedCapacity: 1000kg | max 2163mm / min 1433mm
• Effortless air operation will greatly reduce operator's fatigue and speed up the efficiency of garage work.
• 8-14 BAR suggested air pressure for optimal perfor-mance.
Transmission jacksHeavy duty
31
Transmission jacksHeavy duty
4200000 >Model: 41100C | 500kg | max 630mm / min 343mm
4200000 | 1000kg | max 850mm /min 320mm
• Load-restraining chain for safety.• Head adjustable in all directions for optimal alignment
of transmission bolt patterns and pins.• Rugged steel wheels and full swivel ball bearing casters.• Multi-adjustment knobs ensure that transmission cradle is
always at the right angle to position and accept any load.
< 43000Capacity: 1500 KG | max 1195mm / min 450mm
• Load-restraining chain for safety.• Head adjustable in all directions for optimal alignment
of transmission bolt patterns and pins.• Rugged steel wheels and full swivel ball bearing casters.• Multi-adjustment knobs ensure that transmission cradle is
always at the right angle to position and accept any load.
32
41000C 41001 42001 41100C 4200000 43000
500 kg 500 kg 1000 kg 500 kg 1000 kg 1500 kgModel
Capacity
A (mm)B (mm)C (mm)
C1 (mm)C2 (mm)D (mm)E (mm)F (mm) G (mm)L (mm)
W (mm)N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1016202610104905205535477984090373.581.8
10.175170
10162026101049052055354779
84090381.589.8
10.175170
14332163730
--
19845-
10010021069130.0143.8
10.246
85
343630400
--
114570
-58
79038043.048.2
10.105224
320850650
--
120570
-73
103848584.891.0
10.130184
4501195745
--
250740
-1001188650
133.5147.8
10.231104
Heavy duty Heavy duty - Floor models
C1
C2 E
F
C
B
D
G W
L
Z
A E
L G
D
CB
W
A
46030 46060 46100
300 kg 600 kg 1000 kgModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
1280210582510090076
435575600
105231.034.1
10.0971
270
1267209783010087376435575600
102836.339.4
10.0971
270
13162146830100931125435720640108643.949.4
10.103210
Magic lift GD
C
AEH
F
B
L
W
GD
C
AEH
F
B
L
W
Specifications
33
Engine cranes Foldable
< 44017Model: 44017 - 44018Capacity: 1000 KG
• 44017 with MagicLift hydraulic unit.• 44017 + 44018, operating handle with 270 degrees
swiveling angle.• HTR (Hold-To-Run) mechanism.
PU
270°
44012 > Capacity: 1000 KG
• Foldable cranes Unique folding design for easy, fast and compact storage.
• HTR (Hold-To-Run) mechanism, designed to assure user's maximum safety when the valve is released.
Equalizer optional 90150 680 kg capacity
Equalizer optional 90150 680 kg capacity
34
Engine cranes
< 44020 Capacity: 2000 KG
• Hard chrome plated piston rod.• Built in safety overload valve.• Retractable front legs and lifting boom for easy
storage.
Hydraulic long jack >Models: 44943 - 44947 - 44949 - 44980
• Polished ram plunger and cylinder protect seals from abrasion.
• Built- in safety overload valve.
Equalizer optional 90150 680 kg capacity
44943 44947 44949 44980
4 Ton 4 Ton 4 Ton 8 TonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
6121120508113775030
16.016513062812.728.2
20.060972
6051113508113050030
16.01301146229.920.8
20.0301360
6121120508113750030
16.016513062811.425.0
20.0501056
6001085485
109950035
18.012812061413.528.3
20.0431226
Hydraulic long jack
With 270º swivel handle where indicated
35
44012 44017 44018 44020
1 ton 1 ton 1 ton 2 tonModel
Capacity
A (mm)B (mm)F (mm)L (mm)
M (mm)N (mm)
O (mm)N.W. (Kg)G.W. (Kg)
Pieces CartonWheels
Lifting Arm PositionOperating Swivel
HandleHTR (hold to run)
Magic Lift
Lock position of extension boom
CapacityMinimum hook
height (mm)Maximum hook
height (mm)Boom Lenght (mm)
13301540450845100038012573.080.0
1Metal
4
-
YesNo
146015255701060120035010084.094.0
1PU5
270°
YesYes
146015255701060120035010083.490.6
1PU5
270°
YesNo
1394230517257358601350
89105.0110.5
1Pc = 2CartonMetal
4
-
YesNo
P1
1000
280
2070
710
P2
850
200
2140
795
P3
700
125
2205
870
P4
550
50
2280
950
P1
1000
439
1978
620
P2
900
341
2021
720
P3
800
243
2075
820
P4
700
145
2131
920
P5
600
0
2170
1020
P1
2000
465
1760
1238
P2
1500
355
1910
1465
P3
1000
235
2065
1692
P4
500
127
2200
1919
Foldable Heavy Duty
O
A
B M
L
N
F
Boom Length
Max. HookHeight Min.
Hook Height
44012 44017 & 44018 44020
Specifications
36
Engine Stands & SupportsHeavy Duty
31000 >Engine standCapacity: 500 KG
• Head plate locks in 8 positions and rotates 360°.
90068 1 spindle Capacity: 300 KG
• Feet and spindles are adjustable over the whole length of the support.
90165 2 spindles Capacity: 500 KG
>
> NEW
Ball bearing makes turning the spindle easier
37
C
BE
AD
A
1
2
3
D
B
C
AD
B
C
D
31000 90068 90165
500 Kg 300 Kg 500 KgModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)
Saddle BaseMin. Claw AreaMax. Claw Area
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
8088008787589
250x150292x122402x152
23.025.4
10.043700
1500205310243
----
12.513.5
10.0231250
1650205310243
----
16.017.5
10.0271000
Engine Stand Supports
Specifications
38
Presses > Model: 61154 - 61204 - 61304 - 61504Capacity: 15 - 20 - 30 - 50 Ton
• Excellent for bending, bonding or straightening applications.
• Multi-position bed for work height adjustment (A-B)• Press bed of 50 Ton press moved by Winch.• Double speed pumps for fast ram moving without load.• Cylinder can be re-positioned in width (M).• Gauge indicates metric Tons.
< 61504Capacity: 50 Ton
Handwinch
PressesHeavy duty
39
Gauge Arbor plate Manual operation Foot operation
H
A
L W
W1
W2
M
C B61504
61154 61204 61304 61504
15 ton 20 ton 30 ton 50 tonModel
Capacity
StrokeA (mm)B (mm)C (mm)M (mm)L (mm)
W (mm)W1 (mm)W2 (mm) H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
160168980160160540700500
-172791.5118.5
10.299
56
18535912176176540730510
-1713112139
10.331
56
160151
1031200200700795535
-1772166.7202.7
10.404
56
20069
1048245245800
1030730748
1830298
340.61
0.60756
Presses
Specifications
40
< 65124Capacity: 12 Ton
Optional:Gauge adaptor: 60153-50 (GBW1460)Fitting: 434-4-0000-000
60253 >Capacity: 25 Ton
Bench & Shop pressesHeavy duty
41
Bearing punch 60253
W
W
W1
W1 EDH
DL
A
A CC
L
H
F
B
B
W
C
65124 60253
12 ton 25 tonModel
Capacity
StrokeA (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)H (mm)L (mm)
W (mm)W1 (mm)N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
153,5378.5153.633.3175
---
72517555036549.155.7
10.052320
16563.5869165800115572191495710710510
119.2123.8
20.086156
Presses
Gauge 6025365124 (optional!)
Arbor plate 60253 Gauge adaptor + Fitting65124 (optional!)
Specifications
42
< 50040 Capacity: 4 Ton
• Sets are portable for easy usage in shop or on the road.• Designed for applications such as pushing, spreading
and pressing of vehicle body panels as well as various component parts and assemblies.
50100 >Capacity: 10 Ton
• Sets are portable for easy usage in shop or on the road.• Designed for applications such as pushing, spreading
and pressing of vehicle body panels as well as various component parts and assemblies.
• Handy tubing storage compartment design.• With wheels
Flat base
Plunger toe
Rubber head
Combi head
Ram toe
Serrated saddle
Wedged head Hose
Male connector Spreader
Body Repair KitsHeavy Duty
50040 (mm) 495420215 15575
50100 (mm) 685 455 255105
Length extension bars:
Specifications for the pumps & rams see page 48
43
Wheel arm & pipe bender
9210000 >EZ wheel arm
The EZ Wheel Arm is a great accessory to hold tyres on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of various thickness. The bar can be folded up or sideways when not in use to save space.
Supplied in pairs
WHEEL ARM™
SHINN FU EUROPE B.V. • Tussenriemer 20 • 4704SR Roosendaalthe Netherlands • Tel. +31-165-583300 • Fax. +31-165-583310
The EZ Wheel Arm™ is a great accessory to hold tires on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of varying thickness. The bar can be folded up or sideways when not in use to save space.
Adjustable ArmAdjustable cu� will �t a variety of lift beam thicknesses
Adjustable cu�for various vehicle lift arm sizes
Foldable forvarious space-saving options
Smallest at 3”
Largest at 5”Adjustable arm folds in a varietyof ways
AdjustsVertically
AdjustsHorizontally
All copy rights reserved. ©2014
Worldwide Patent Pending capacity of 45 kgs
Model: 92100
WHEEL ARM™
SHINN FU EUROPE B.V. • Tussenriemer 20 • 4704SR Roosendaalthe Netherlands • Tel. +31-165-583300 • Fax. +31-165-583310
The EZ Wheel Arm™ is a great accessory to hold tires on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of varying thickness. The bar can be folded up or sideways when not in use to save space.
Adjustable ArmAdjustable cu� will �t a variety of lift beam thicknesses
Adjustable cu�for various vehicle lift arm sizes
Foldable forvarious space-saving options
Smallest at 3”
Largest at 5”Adjustable arm folds in a varietyof ways
AdjustsVertically
AdjustsHorizontally
All copy rights reserved. ©2014
Worldwide Patent Pending capacity of 45 kgs
Model: 92100
WHEEL ARM™
SHINN FU EUROPE B.V. • Tussenriemer 20 • 4704SR Roosendaalthe Netherlands • Tel. +31-165-583300 • Fax. +31-165-583310
The EZ Wheel Arm™ is a great accessory to hold tires on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of varying thickness. The bar can be folded up or sideways when not in use to save space.
Adjustable ArmAdjustable cu� will �t a variety of lift beam thicknesses
Adjustable cu�for various vehicle lift arm sizes
Foldable forvarious space-saving options
Smallest at 3”
Largest at 5”Adjustable arm folds in a varietyof ways
AdjustsVertically
AdjustsHorizontally
All copy rights reserved. ©2014
Worldwide Patent Pending capacity of 45 kgs
Model: 92100
WHEEL ARM™
SHINN FU EUROPE B.V. • Tussenriemer 20 • 4704SR Roosendaalthe Netherlands • Tel. +31-165-583300 • Fax. +31-165-583310
The EZ Wheel Arm™ is a great accessory to hold tires on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of varying thickness. The bar can be folded up or sideways when not in use to save space.
Adjustable ArmAdjustable cu� will �t a variety of lift beam thicknesses
Adjustable cu�for various vehicle lift arm sizes
Foldable forvarious space-saving options
Smallest at 3”
Largest at 5”Adjustable arm folds in a varietyof ways
AdjustsVertically
AdjustsHorizontally
All copy rights reserved. ©2014
Worldwide Patent Pending capacity of 45 kgs
Model: 92100WHEEL ARM™
SHINN FU EUROPE B.V. • Tussenriemer 20 • 4704SR Roosendaalthe Netherlands • Tel. +31-165-583300 • Fax. +31-165-583310
The EZ Wheel Arm™ is a great accessory to hold tires on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of varying thickness. The bar can be folded up or sideways when not in use to save space.
Adjustable ArmAdjustable cu� will �t a variety of lift beam thicknesses
Adjustable cu�for various vehicle lift arm sizes
Foldable forvarious space-saving options
Smallest at 3”
Largest at 5”Adjustable arm folds in a varietyof ways
AdjustsVertically
AdjustsHorizontally
All copy rights reserved. ©2014
Worldwide Patent Pending capacity of 45 kgs
Model: 92100
WHEEL ARM™
SHINN FU EUROPE B.V. • Tussenriemer 20 • 4704SR Roosendaalthe Netherlands • Tel. +31-165-583300 • Fax. +31-165-583310
The EZ Wheel Arm™ is a great accessory to hold tires on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of varying thickness. The bar can be folded up or sideways when not in use to save space.
Adjustable ArmAdjustable cu� will �t a variety of lift beam thicknesses
Adjustable cu�for various vehicle lift arm sizes
Foldable forvarious space-saving options
Smallest at 3”
Largest at 5”Adjustable arm folds in a varietyof ways
AdjustsVertically
AdjustsHorizontally
All copy rights reserved. ©2014
Worldwide Patent Pending capacity of 45 kgs
Model: 92100
< 6615000Pipe BenderCapacity: 15 Ton
• Complete with 8 former attachments for a wide variety of pipe diameters.
• Capable of bending high pressure/temperature tubing as well as standard hydraulic, gas, steel, aluminum and brass from 12.7mm up to 76,2mm with included attachments.
Specifications:Cilinder capacity: 15 TonRam range: 251mm
Max. working pressure: 700 BARProduct size: 770x779x970mm
G.W.: 82.8 Kg
12,7mm 19,1mm 25,4mm 31,8mm 38,1mm 50,8mm 76,2mm64mm
Min width 79 mmMax width 142 mm
Min height 76 mmMax height 123 mm
W W
H H
44
Tyre handling equipment
22910 >Bead BreakerCapacity: 5 Ton
• For single rimmed wheels, with a maximum rim size of 25".
• Oil capacity 250cc.
47053 >Wheel DollyCapacity: 680 Kg
• Hydraulic system actuated to provide smooth, positive power for the removal and installation of single, tandem and duplex tyres and wheels.
• Adjustable cradle rollers and lifting height.
< 90250Move JackCapacity: 680 Kg
• Ideal for manoeuvring cars in shops and showrooms.• Rigid steel frame - 680 Kg capacity per jack, 2720 Kg
capacity per 4 jacks set.• Handles tyres up to 12" - 305mm wide.• Easy foot-pedal operation.
2 jacks: allow full 180° vehicle pivot.4 jacks: place vehicle on 360° rolling platform.
45
BD
C
A
EØ
F
H
G
J
F
K
G
A
B
C
I
E
H
C
A
J I
H
E
F
GD
L K
47053 90250 22910
680 Kg 680 Kg 5 tonModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)H (mm)I (mm)J (mm)K (mm)L (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
609220638
-12550858348
10731090883
-68.072.2
10.129144
30534554062510219068560
----
35402
0.134400
397-
131.5735523033020953813810014.016.4
10.0221125
Wheel Dolly Bead BreakerMove Jack
Specifications
46
Hydraulic hand pumps >Model: 55040 - 55100Capacity: 270cc / 700 BAR - 770cc / 700 BAR
• Built-in safety overload valve.
Hydraulic cylinders >Model: 55049 - 55109Capacity: 4 Ton - 10 Ton
• Internal plunger wipers help seal out dirt and a guide ring is designed to protect against side load damage.
• Industrial hard chrome-plated ram helps to prevent rust and corrosion.
• Maximum working pressure: 700 BAR / 10000psi.
55049Also included in the auto-body repair-kit 50040. (page 34)55109Also included in the auto-body repair-kit 50100. (page 34)
< Air actuated treadle pumpModel: 22903Capacity: 1500cc / 700 BAR
• Built-in safety overload valve.• Durable lightweight aluminum reservoir.• Foot pedal provides hand-free user-friendly operation.
5504955109
< Pull cylindersModel: 71055 - 71105Capacity: 5 Ton - 10 Ton
Pumps & CylindersHeavy duty
47
C B
A
D
G
F
E
D
A
C
B
D E
AB
C
F
BA
D
C
F
1 1/4”-NPT1 1/4”-NPT
55040 55100 22903 55049 55109 71055 71105
700 BAR 700 BAR 1500BAR 4 Ton 10 Ton 5 Ton 10 TonModel
Capacity
Oil Capacity (cc)A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)
Weight (Kg)N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.Hose Length (mm)
CouplerPressure Rating
(BAR)Output Flow Rate
(cm3 / min)No Load
LoadAir pressure range
(BAR)
270400310147130
----
6.16.61
0.0141980
13x18181/4" NPTF-18
-
--
-
770480500147130
----
7.27.81
0.0201320
13x18181/4" NPTF-18
-
--
-
1500263126
1/4" NPTF-183/8" NPTF-18
1851301368.2-------
700
1075180
7-14
100274397123384425--
1.88.61
0.0018780
--
-
--
-
290348502154586641--
4.95.11
0.0043529
--
-
--
-
10629443514158-
32--
3.88.62
0.0073456
-1/4" NPTF
700
--
-
23629044015070-
32--
5.512.0
20.0083000
-1/4" NPTF
700
--
-
Foot pumpHydraulic pumps Hydraulic cylinders Pull Cylinders
Specifications
130
10300 8 + 910500 8 + 910990 8 + 91102500 8 + 91104500 8 + 91106500 8 + 91108500 8 + 91112500 8 + 91112900 8 + 91120500 8 + 91120900 8 + 91202100 8 + 91204100 8 + 917302C 8 + 918202C 8 + 9 2102701 12 + 152103001 10 + 142119077 1272119080 1272119086 1272119087 1272119088 1272119089 12722101C 17 + 1822201 17 + 1822903 46 + 4722910 44 + 4523113 20 + 2423152 19 + 2423205 22 + 2523207 22 + 2523211 22 + 2523212 20 + 2423301C 23 + 2523501 23 + 2523991 23 + 2524113 21 + 2424213 21 + 2424301 23 + 2424601 23 + 242501503 13 + 152502303 13 + 152505700 16 + 182510700 16 + 182602701 11 + 14
2702701 11 + 1428045 13 + 152902301 12 + 152902401 10 + 142902501 12 + 152903001 11 + 152903501 10 + 142903701 11 + 14 31000 36 + 373203100 26 + 283203500 26 + 283203900 27 + 283206100 26 + 283206500 26 + 283207500 27 + 283210901 27 + 283212100 26 + 283212500 26 + 283220100 26 + 283222500 27 + 28 41000C 30 + 3241001 30 + 3241100C 31 + 3241901 294200000 31 + 3242001 30 + 3243000 31 + 3244012 33 + 3544017 33 + 3544018 33 + 3544020 34 + 3544943 3444947 3444949 3444980 3446030 29 + 3246060 29 + 3246100 29 + 3247053 44 + 45 50040 4250100 4255040 46 + 4755049 46 + 47
55100 46 + 4755109 46 + 47
60253 40 + 4161154 38 + 3961204 38 + 3961304 38 + 3961504 38 + 3965124 40 + 416615000 43 71055 46 + 4771105 46 + 47 90150 33 + 3490068 36 + 3790165 36 + 3790250 44 + 459210000 43 A1000 56 B0200 50B0400 50B0600 50 C1001 56C-9802 119C-9803 119C-9806 119C-9836 120CP4031 118CP5031 118CP6031 118CP7031 118CP9605 120 F2000 51 + 53F2000 B 51 + 53F5210 51 + 53F777 51 + 53 G2000 52 + 53G2250 52 + 53G3000 52 + 53
HR8000 102HRD70 117HRD100 117HRK8007 103HRP42 116HRP100 116HS7000 104HSS7006M 104HSS7006S 104HSS7006Z 104HSS7008S 104HSS7008V 104HSS7008Z 104 I-7011 129I-7012 129I-7015 129IJS6000 112IJS6000D 112IJS11000 113 M0001 89M0003 84M0006 69M0012 68M0013 68M0017 71M0023 66M0027 67M0029 67M0032 91M0034 83M0048 67M0078 71M0105 78M0119 81M0121 84M0127 66M0135 84M0136 84M0137 84M0138 84M0141 84M030N 94M0381 84
131
M1000N 94M110N 94M1208 82M1209 82M1219 95M1224 95M1228 76M1234 82M1256 80M1297 75M1395 74M1443 72M1500 79M1500N 94 M2008 101M2012 68M2016 98M2020 101M2033 99M2034 98M2038 99M2041 99M2042 99M2060 96M2061 96M2062 97M2072 97M210N 94M2305 86M2308 86M2312 86M2339 88M2405 87M2408 87M2412 87M2435 83M2560 89M2562 89M2563 89 M3205 105M3206 105M3234 101M3314 100M3316 100
M3322 100M3350 63M3379 63M3397 63M3414 76M3424 95M3500-MDF01 60M3531 60M3591 62M3593 62M3760 61M3770 60 + 61M3817 83M3852 73 M500N 94M5713 77 M7580 85M7583 85M7584 85M7585 85M7586 85M7587 85M7588 85M7589 85M7591 85M7592 85M7593 85M7594 85M7596 85M7597 85M7598 85M7599 85M7808 85M7809 85M7810 85M7811 85M7812 85M7813 85M7814 85M7815 85M7816 85M7817 85M7818 85M7819 85
M8000 71M8011 71M8015 77M8104 68M8107 70M8203 69M8204 69M8207 70M8304 69M8306 70M8308 70 M9009 89M9036 96M9048 96M9056 96M9104 88M9304 92M9305 90M9306 90M9308 90M9402 93M9404 93M9405 93M9406 93M9410 92M9411 92M9414 96M9438 92M9455 92M9506 91M9516 91M9711 105M9807 106M9900 107M9901 107M9907 106M9911 107M9916 106M9922 107M9924 106M9930 107M9999 108 + 109M9999-03 108M9999-04 108M9999-S 108
MD02 64MD12 64MD15 65 P0501 57PA-01 126PA-02 126PL-041 123PL-1001B 122PL-1001G 122PL-1001O 122PL-1007 122PL-1016 123PL-1200C 124PL-511 124PL-530 124PO-08 125PO-10 125PO-16 125PO-44 125 RS-9832 121RS-9833 121 T2002 54T3003 54T3004 54T5350B 55TI-00001 115TI-00003 115TI-10711 114TI-10721 114TI-11221 114TI-11224 115 U0705 128 W2001 126
GLOBAL LOCATIONSwww.shinnfu.com
EUROPE, AFRICA & MIDDLE EASTTussenriemer 20 4704 SR Roosendaalthe NetherlandsTel. +31 165-583300Fax +31 165-583310email: [email protected]
AUSTRALIA & PACIFIC15 Viewtech PlaceRowville 3178, Victoria AustraliaTel. 61 3 9755-8277Fax 61 3 9755-8219email: [email protected]
ASIA7F., NO. 408 Ruei Guang RoadNei Hu District, Tapei City 114Taiwan R.O.C.Tel. 886 2 8751-7888Fax 886 2 8751-7999email: [email protected]
CHINA3950 Hu Min Road201108, ShanghaiChinaTel. +86 21 64891469Fax +86 21 64891465email: [email protected]
USA, CANADA, MEXICO, CENTRAL & SOUTH AMERICA10939 N. Pomona Ave.Kansas City, MO 64153Tel. 888 332 6419, 816 891 6390Fax 816 891 6599email: [email protected]
SHINN FU EUROPE B.V.www.shinnfu.com
version 2015-03
WORKSHOP CATALOGUEEngineered to last
SHINN FU EUROPE B.V.www.shinnfu.com
2
WARRANTY CoNdiTioNs For oMEGA and PRo LiFT BRANd LiFT EQUiPMENTAll Shinn Fu products are carefully supervised throughout the manufacturing process. Before sending the products to the cus-tomers, every article is checked for material and manufacturing defects. The high quality and reliability of our products is what characterizes our brands.
Shinn Fu’s products are warranted against defects in material and workmanship for a period of two (2) years for both OMEGA and PRO LIFT (from the date of purchase).
Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair, replace or credit (at its option) the product without charge.
Warranty assessment: In case of defective articles the customers have to contact a Shinn Fu Europe B.V dealer for further instructions.
WARRANTY CoNdiTioNs For oMEGA-MECHANiX brand productsShinn Fu’s products are warranted (for the expected life of the products) against defects in material and workmanship.
Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair or replace (at its option) the product without charge.
disclaimers and Limitations:This LIMITED WARRANTY does not extend to products manufactured by SHINN FU that in its sole judgment were improperly used, altered, abused or repaired by others.
• Ten (10) years limited warranty for OMEGA-MECHANIX hand tools with exception of shank bits, bit sockets, ratchet handles, torque-sockets, torque-wrenches, air impact wrench and electrical impact wrench.
• Two (2) years limited warranty for OMEGA-MECHANIX ratchet handles, torque-sockets, torque-wrenches and air impact wrenches.
• One (1) year limited warranty on all OMEGA-MECHANIX products that are equipped with a battery or 230V power lead.• No warranty on shank bits and socket bits, or wear items like creeper wheels.
Shinn Fu is not liable for incidental or consequential costs or losses incurred by product purchaser or user.
Warranty Assessment: In case of defective articles the customers have to contact their Shinn Fu Europe B.V dealer for further instructions.The product price is in consideration of limiting Shinn Fu’s liability for products manufactured or distributed.
WARNiNG!Familiarize yourself carefully with these products before using. Know the hazards associated with their improper use. Never use these products for any purpose other than for which they are specifically intended.
3
SHINN FU Under the direction and leadership of the founder Mr. Michael Hung, and the hard work and devotion of their employ-ees, Shinn Fu Group has firmly established itself as a world leader in the automotive and hydraulic industry. Shinn Fu Corporation was founded by Mr. Michael Hung in 1971 (based Chia-yi, Taiwan). Shinn Fu’s vision is one of continu-ous growth and prosperity. Their goal is to generate strong growth and new levels of achievement, and to continue to make the company even more customer-focused, responsive, efficient and innovative. The insistence of producing and offering only the highest quality products has earned Shinn Fu Group a reputation for excep-tional quality in the automotive lifting equipment, hydraulic equipment, and automotive accessories with strong brands in the professional market and invaluable recognition for reliability in the DIY market. The quality of Shinn Fu's products is recognized not only by customers worldwide, but also by international governments and industry agencies including the American National Standards Institute (ANSI), Australian Standards (AS). European Conformity (CE), Germany's Technical Inspection Association (TUV), and Japanese Industrial Standards (JIS). Every Shinn Fu product is specifically designed and engineered to not only meets, but to exceed the industry standards set forth by these organizations.
Shinn Fu’s commitment to quality permeates all aspects of the organization, and it is aggressively assimilating the Interna-tional Quality Assurance System into its production fold. Currently Shinn Fu has three plants that are ISO9001, ISO14000 and QS9000 compliant, and a mechanical jack manufacturing plant that conforms to rigorous automotive industry Quality Assur-ance (QA) standards. All other facilities in the Shinn Fu Group have initiated programs to reach compliance in the near future in order to progress toward Shinn Fu's goal of total quality system compliance. Shinn Fu is committed to continuous upgrades all of its facilities to ensure that they remain state-of-the-art.
Shinn Fu possesses a valuable, substantial and global patent portfolio that covers many important inventions in hydraulics, lifting, and automotive accessories. Shinn Fu is also devoted to supplying safe user-friendly product lines.
In order to provide our customers with excellent after-sales service, Shinn Fu has established worldwide branch offices in the USA, Canada, Australia, Hong Kong, Japan and Europe. This global presence facilitates the establishment of strong customer relationships and allows Shinn Fu to provide more effective customer assistance. Shinn Fu Europe B.V. (SFE) was established in 1994 in The Netherlands. With the objective of promoting and distributing Shinn Fu's products in the markets of Europe, Middle East and Northern Africa, SFE launched the Omega Lifting Equipment program beginning in 1994. Since then, Omega has won the market's recognition.SFE maintains the following divisions:• BVA Hydraulics™• Omega Lift Equipment®• Omega Mechanix• Pro-Lift®
Thanks to our customers' trust and support in the past years. SFE is definitely encouraged to devote time and effort to the continuation of efficiently distributing high quality and innovative products to our customers throughout the region.
48
Lift
ing
equi
pmen
t
49
Index
Bottle jacks Page 50
Floor jacks Page 51
Garage jacks Page 52
Specifications Page 53
Jacks stands Page 54
Lawn mower lift Page 55
Engine crane & body repair kit Page 56
Pit jack Page 57
50
Bottle jacks
• Steel lifting saddle created for load gripping power.• Extension screw adjusts to accommodate work height.• Patented bypass device protects against over-pumping.• Heat treated critical stress areas ensure long life performance.• Meets or exceeds CE & ANSI/PALD standards.• Ideal for auto, truck service, farm and shop use.
B0200 >Bottle Jack - 2 Ton
B0200: 95mmx95mmx183mm (LxWxH)Lifting Range: 183-348mm
Packing specification: Carton: 6 - Length: 340mm - Wide: 230mm - Height: 220mm - N.W.(Kgs): 2.9 - G.W.(Kgs): 18.3 - CBM: 0.017
< B0400Bottle Jack - 4 Ton
B0400: 107mmx99mmx204mm (LxWxH)Lifting Range: 204-391mm
Packing specification: Carton: 6 - Length: 410mm - Wide: 250mm - Height: 250mm - N.W.(Kgs): 4 - G.W.(Kgs): 25.3 - CBM: 0.026
B0600 >Bottle Jack - 6 Ton
B0600: 115mmx102mmx219mm (LxWxH)Lifting Range: 219-427mm
Packing specification: Carton: 4 - Length: 270mm - Wide: 240mm - Height: 273mm - N.W.(Kgs): 5.2 - G.W.(Kgs): 21.8 - CBM: 0.018
51
Floor jacks
< F5210Floor jack extra high (SUV) lift - 2.25 Ton
F5210: 719mmx249mmx150mm (LxWxH)Lifting Range: 150-533mm
F777 >Low Profile - 2 Ton
F777: 600mmx219mmx147mm (LxWxH)Lifting Range: 89-356mm
< F2000Floor jack - 2 Ton
F2000: 504mmx201mmx104mm (LxWxH)Lifting Range: 140-356mm
F2000 BFloor jack in blow mold case - 2 Ton
<
52
Garage jacks
G3000 >Garage Jack - 3 Ton
G3000: 682mmx344mmx155mm (LxWxH)Lifting Range: 125-470mm• Double Piston.• Universal Joint.• Bypass System to prevent overloading
and over-pumping.• Compactly Build.• Including Saddle Pad.
< G2000Low profile garage jack - 2 Ton
G2000: 725mmx340mmx145mm (LxWxH)Lifting range: 88-485mm • Double Piston.• Universal Joint.• Bypass System to prevent overloading
and over-pumping.• Compactly Build.• Including Saddle Pad.
G2250 >Garage Jack - 2.25 Ton.
G2250: 644mmx335mmx165mm (LxWxH)Lifting Range: 135-495mm
• Gear type
53
F2000 F777 F5210 G3000 G2000 G2250
2 ton 2 ton 2.25 ton 3 ton 2 ton 2.25 tonModel
Capacity
A (mm)B (mm)
Stroke C (mm)E (mm)F (mm)I (mm)J (mm)L (mm)
W (mm)H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
Soft Saddle-Pad
Universal Joint
Air vent valve or oil filter plug
Wheels
13535022050048603549021011510.2111
0.018x
-
-
-
Metal
89356297620506035
60021912016.117.5
10.029
x
x
-
-
Metal
150533383620607550
71925012519.4211
0.036x
-
-
-
Metal
1254703451100110805567033714030.4321
0.059x
x
x
-
Metal
8848539711001107055
72534014032341
0.053x
x
x
-
Metal
1354953601100110905074034514030.231.5
10.054
x
-
-
-
Metal
Hydraulic service jacks
Metal
A
F
I J
H
W
L
BC E
Specifications
54
Jack stands
• High quality cast ductile iron ratchet bar.• Ideal for auto, truck service, farm and shop use.• Height adjustment mechanism allows smooth upward movement while release handle locks into position.• Meets or exceeds ANSI/PALD standards.• Sturdy stamped steel construction.
T3004 >Jack Stands Ratchet (Extra High) - 2.25 Ton
T3004: 215mmx170mmx340mm (LxWxH)Lifting Range: 340-535mm
Packing specification: Carton: 1 - Length: 305mm - Wide: 245mm - Height: 320mm -
N.W.(Kgs): 6.6 - G.W.(Kgs): 7.6 - CBM: 0.024
< T3003Jack Stands Ratchet - 2.8 Ton
T3003: 208mmx180mmx284mm (LxWxH)Lifting Range: 305-450mm
Packing specification: Carton: 1 - Length: 318mm - Wide: 230mm - Height: 280mm -
N.W.(Kgs): 6.6 - G.W.(Kgs): 7.4 - CBM: 0.017
T2002 >Jack stands foldable - 2 Ton
G2002: 250mmx250mmx249mm (LxWxH)Lifting Range: 280-355mm
Packing specification: Carton: 6 - Length: 514mm - Wide: 200mm - Height: 295mm - N.W.(Kgs): 21.4 - G.W.(Kgs): 22.8 - CBM: 0.030
55
Lawn mower lift
T5350B >Lawn mower lift
Capacity: 155 KgLift height: 508mm
Weight: 36,5 KgCompatible wheel track: 116,8cm - 129,5cm outside span
• Perform necessary mower maintenance • Easy, convenient hydraulically powered foot pedal operation • Rubber coated saddle to prevent unwanted movement • Welded solid steel construction • Positive dual locking safety latch for added safety • Four steel wheels for sturdy mobility• Patent pending • Extra side breackets for more stability
Packing specification: Carton: 1 - Length: 1110mm - Wide: 440mm - Height: 210mm - N.W.(Kgs): 36.5 - G.W.(Kgs): 40 - CBM: 0.104
56
Engine crane & body repair kit
• Polished ram plunger and cylinder protects seals from abrasion.• Foldable model with retractable front legs and lifting boom for easy storage.• Built-in safety valve ensures operator’s safety against overloading.• Heavy duty welded construction with rugged reinforced tubular steel.
< C1001Foldable Engine Crane
C1001: 1540mm x 1000mm x 1330mm (LxWxH)Capacity: 1000 KgLifting Range: 50-2280mm
Packing specification: Carton: 1 - Length: 1430mm - Wide: 460mm - Height: 345mm - N.W.(Kgs): 73.0 - G.W.(Kgs): 80.0 - CBM: 0.226
< A1000Body repair kit
Boom Length
Max. HookHeight Min.
Hook Height
Lock position of extension boom
CapacityMinimum hook
height (mm)Maximum hook
height (mm)Boom Lenght (mm)
N.W. (Kg)G.W. (Kg)
P1
1000
280
2070
710
P2
850
200
2140
795
P3
700
125
2205
870
P4
550
50
2280
950
C1001
73.080.0
Sets are portable for easy usage in shop or on the road.Designed for applications of pushing, spreading and pressing of vehicle body panels as well as various component parts and assemblies.
57
Pit jack
P0501 >Pit Jack
P0500: 600mm x 600mm x 1100mm (LxWxH)Capacity: 500 KgLifting Range: 1100-1900mm
HTR (Hold-To-Run) mechanism, designed to assure users' maximum safety when the valve is released.
P0501
500 kgModel
Capacity
A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)
W (mm)H (mm)
N.W. (Kg)G.W. (Kg)
Pieces CartonCBM/CTN
Pcs/20ft Cont.
11001900700507757632560060097528301
0.069
Pit Jack
GD
C
AEH
F
B
L
W
GD
C
AEH
F
B
L
W
130
10300 8 + 910500 8 + 910990 8 + 91102500 8 + 91104500 8 + 91106500 8 + 91108500 8 + 91112500 8 + 91112900 8 + 91120500 8 + 91120900 8 + 91202100 8 + 91204100 8 + 917302C 8 + 918202C 8 + 9 2102701 12 + 152103001 10 + 142119077 1272119080 1272119086 1272119087 1272119088 1272119089 12722101C 17 + 1822201 17 + 1822903 46 + 4722910 44 + 4523113 20 + 2423152 19 + 2423205 22 + 2523207 22 + 2523211 22 + 2523212 20 + 2423301C 23 + 2523501 23 + 2523991 23 + 2524113 21 + 2424213 21 + 2424301 23 + 2424601 23 + 242501503 13 + 152502303 13 + 152505700 16 + 182510700 16 + 182602701 11 + 14
2702701 11 + 1428045 13 + 152902301 12 + 152902401 10 + 142902501 12 + 152903001 11 + 152903501 10 + 142903701 11 + 14 31000 36 + 373203100 26 + 283203500 26 + 283203900 27 + 283206100 26 + 283206500 26 + 283207500 27 + 283210901 27 + 283212100 26 + 283212500 26 + 283220100 26 + 283222500 27 + 28 41000C 30 + 3241001 30 + 3241100C 31 + 3241901 294200000 31 + 3242001 30 + 3243000 31 + 3244012 33 + 3544017 33 + 3544018 33 + 3544020 34 + 3544943 3444947 3444949 3444980 3446030 29 + 3246060 29 + 3246100 29 + 3247053 44 + 45 50040 4250100 4255040 46 + 4755049 46 + 47
55100 46 + 4755109 46 + 47
60253 40 + 4161154 38 + 3961204 38 + 3961304 38 + 3961504 38 + 3965124 40 + 416615000 43 71055 46 + 4771105 46 + 47 90150 33 + 3490068 36 + 3790165 36 + 3790250 44 + 459210000 43 A1000 56 B0200 50B0400 50B0600 50 C1001 56C-9802 119C-9803 119C-9806 119C-9836 120CP4031 118CP5031 118CP6031 118CP7031 118CP9605 120 F2000 51 + 53F2000 B 51 + 53F5210 51 + 53F777 51 + 53 G2000 52 + 53G2250 52 + 53G3000 52 + 53
HR8000 102HRD70 117HRD100 117HRK8007 103HRP42 116HRP100 116HS7000 104HSS7006M 104HSS7006S 104HSS7006Z 104HSS7008S 104HSS7008V 104HSS7008Z 104 I-7011 129I-7012 129I-7015 129IJS6000 112IJS6000D 112IJS11000 113 M0001 89M0003 84M0006 69M0012 68M0013 68M0017 71M0023 66M0027 67M0029 67M0032 91M0034 83M0048 67M0078 71M0105 78M0119 81M0121 84M0127 66M0135 84M0136 84M0137 84M0138 84M0141 84M030N 94M0381 84
131
M1000N 94M110N 94M1208 82M1209 82M1219 95M1224 95M1228 76M1234 82M1256 80M1297 75M1395 74M1443 72M1500 79M1500N 94 M2008 101M2012 68M2016 98M2020 101M2033 99M2034 98M2038 99M2041 99M2042 99M2060 96M2061 96M2062 97M2072 97M210N 94M2305 86M2308 86M2312 86M2339 88M2405 87M2408 87M2412 87M2435 83M2560 89M2562 89M2563 89 M3205 105M3206 105M3234 101M3314 100M3316 100
M3322 100M3350 63M3379 63M3397 63M3414 76M3424 95M3500-MDF01 60M3531 60M3591 62M3593 62M3760 61M3770 60 + 61M3817 83M3852 73 M500N 94M5713 77 M7580 85M7583 85M7584 85M7585 85M7586 85M7587 85M7588 85M7589 85M7591 85M7592 85M7593 85M7594 85M7596 85M7597 85M7598 85M7599 85M7808 85M7809 85M7810 85M7811 85M7812 85M7813 85M7814 85M7815 85M7816 85M7817 85M7818 85M7819 85
M8000 71M8011 71M8015 77M8104 68M8107 70M8203 69M8204 69M8207 70M8304 69M8306 70M8308 70 M9009 89M9036 96M9048 96M9056 96M9104 88M9304 92M9305 90M9306 90M9308 90M9402 93M9404 93M9405 93M9406 93M9410 92M9411 92M9414 96M9438 92M9455 92M9506 91M9516 91M9711 105M9807 106M9900 107M9901 107M9907 106M9911 107M9916 106M9922 107M9924 106M9930 107M9999 108 + 109M9999-03 108M9999-04 108M9999-S 108
MD02 64MD12 64MD15 65 P0501 57PA-01 126PA-02 126PL-041 123PL-1001B 122PL-1001G 122PL-1001O 122PL-1007 122PL-1016 123PL-1200C 124PL-511 124PL-530 124PO-08 125PO-10 125PO-16 125PO-44 125 RS-9832 121RS-9833 121 T2002 54T3003 54T3004 54T5350B 55TI-00001 115TI-00003 115TI-10711 114TI-10721 114TI-11221 114TI-11224 115 U0705 128 W2001 126
GLOBAL LOCATIONSwww.shinnfu.com
EUROPE, AFRICA & MIDDLE EASTTussenriemer 20 4704 SR Roosendaalthe NetherlandsTel. +31 165-583300Fax +31 165-583310email: [email protected]
AUSTRALIA & PACIFIC15 Viewtech PlaceRowville 3178, Victoria AustraliaTel. 61 3 9755-8277Fax 61 3 9755-8219email: [email protected]
ASIA7F., NO. 408 Ruei Guang RoadNei Hu District, Tapei City 114Taiwan R.O.C.Tel. 886 2 8751-7888Fax 886 2 8751-7999email: [email protected]
CHINA3950 Hu Min Road201108, ShanghaiChinaTel. +86 21 64891469Fax +86 21 64891465email: [email protected]
USA, CANADA, MEXICO, CENTRAL & SOUTH AMERICA10939 N. Pomona Ave.Kansas City, MO 64153Tel. 888 332 6419, 816 891 6390Fax 816 891 6599email: [email protected]
SHINN FU EUROPE B.V.www.shinnfu.com
version 2015-03